We currently rely on the "monitors-changed" signal of LayoutManager to
relayout the OSD window. That is not enough, since the scale factor also
changes the way the OSD window is sized, and that can be updated after
"monitors-changed" has been received.
The visual effect is that under some circumstances, the OSD window will
have the wrong size under HiDpi.
This commit fixes the issue by triggering another relayout when the
scale factor changes.
https://bugzilla.gnome.org/show_bug.cgi?id=772723
Similar to bug 667552 for the app switcher, attached modal dialogs
can result in an unexpected window order in the window switcher:
Selecting a window with an attached dialog will focus the dialog
instead, but as the dialog itself is ignored in the window list,
its last-used timestamp is not taken into account for the position
in the MRU list. Fix this by fetching the list of all NORMAL windows
and filter out skip-taskbar windows ourselves, while making sure that
windows appear in the position of their attached modal dialog where
appropriate.
https://bugzilla.gnome.org/show_bug.cgi?id=747153
We only connect to the corresponding property notifications after both
Client and RemoteSettings are ready, so we may miss the initial signal
emission. Make sure to pick up the connections in this case to fix the
network indicator not showing up.
https://bugzilla.gnome.org/show_bug.cgi?id=772249
Similar to windows on another workspace, selecting a minimized window
doesn't look quite right - the selected window disappears, then animates
back in. Fix this by adding support for skipping the next effect to the
wm and use it to bypass the unminimize animation.
https://bugzilla.gnome.org/show_bug.cgi?id=771536
Both 'cycle-group' and 'cycle-window' shortcuts allow cycling through
windows on all workspaces. While this works, it looks quite broken
since we started showing clones for highlighting: the selected window
vanishes (when its clone is destroyed), then slides back in with its
workspace. Instead, slide the selected window to its workspace like
we do for the 'move-to-workspace-*' shortcuts.
https://bugzilla.gnome.org/show_bug.cgi?id=771536
Commit 3171819c improved window cycling by using a dedicated to clone
for highlighting rather than activating all cycled windows. Original
window actors are hidden while its clone is showing, and shown again
afterwards, however the latter is wrong for actors that are not supposed
to be visible (for example where the window is minimized, or on a different
workspace). Fix this by properly syncing the actor's visibility instead
of showing it unconditionally.
https://bugzilla.gnome.org/show_bug.cgi?id=771536
Since commit 82950ecea, we acknowledge pending messages when closing a
chat notification for a channel we are handling to prevent the channel
from popping up again immediately. While this isn't an issue for channels
we don't handle, the unread messages of the destroyed notification are
still considered for the messages indicator in the top bar, which is
clearly confusing (in particular when we end up showing the indicator
without any notifications in the list). As it's arguably correct to not
meddle with a channel handled by someone else, just reset the cache of
pending messages to address this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=770888
Mutter's plugin destroy event doesn't happen if a window is hidden
when it gets unmanaged so we also need to handle the
MetaWindow::unmanaged signal to check whether the parent should
dimmed.
https://bugzilla.gnome.org/show_bug.cgi?id=752524
meta_window_foreach_transient() iterates through all transients of a
window, not only direct transients. This means that simply checking if
a transient is an attached dialog isn't enough because it might be a
non-direct transient for the window we're checking, in which case we
don't want to dim the window.
In particular this fixes windows not getting undimmed when they have
more that one level of transient children and the direct transient gets
destroyed. In that case we would still find at least one non-direct
transient child and decide to keep the window dimmed.
https://bugzilla.gnome.org/show_bug.cgi?id=770163
Commit bd6e7f14d1 reimplemented the cycle keybindings to
fix cycling between more than two windows, but the approach
of highlighting cycled windows by actually focusing them has
the drawback that cycling messes up the MRU order of windows.
To fix this, only change the window focus when the operation
finishes, and use a dedicated actor that draws a border around
a window clone for highlighting.
https://bugzilla.gnome.org/show_bug.cgi?id=771063
There's no particular reason for this actor to be reactive and thus
preventing input events to reach actors underneath, e.g. quickly
clicking on something while the popup isn't yet finished animating
out.
https://bugzilla.gnome.org/show_bug.cgi?id=770382
Have it notify properly of changes to the current input source, as
well as exposing those in get_groups().
The support for virtual keyboard events has been replaced by
ClutterVirtualInputDevice, which can be thought of as the equivalent
to the XTEST devices in X11.
https://bugzilla.gnome.org/show_bug.cgi?id=765009
If a sandboxed app requests access to some system resource (camera,
microphone, location), the portal frontend needs to ask the user
for permission. In GNOME, we want this to be a system modal dialog,
so provide an org.freedesktop.impl.portal.access implementation
that exposes a generic system modal permission dialog on the bus.
https://bugzilla.gnome.org/show_bug.cgi?id=768669
We currently use the :active pseudo class to mark the selected day
in the calendar. Whenever the selected date changes, the class is
added to the corresponding button and removed from all others.
However when the selected date doesn't change (i.e. when clicking
the already selected date), the buttons are not updated and the
use of the :active class conflicts with StButton's builtin handling
of the class - the class is removed on the button up event and the
button is deselected.
Fix this by simply using a different pseudo class.
https://bugzilla.gnome.org/show_bug.cgi?id=746867
The last patch fixed marking days in the calendar where all
events are ignored, but it doesn't pick up the change when
an event is hidden. Emit an appropriate change notification
to fix this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=768538
Ignoring events is currently implemented in the message list's
event section, which means that the calendar does not consider
ignored events when marking days with events. In order to fix
this, move the handling of ignored events to the event source,
which is shared between both components.
https://bugzilla.gnome.org/show_bug.cgi?id=768538
Commit 9b07ce1d0d broke the code that keeps the OSD window square.
Use that opportunity to move away from the hack of setting the
min-height style property from code and adjusting the width on
allocate, and implement a proper constraint instead.
https://bugzilla.gnome.org/show_bug.cgi?id=768317
ClutterActor:width is a floating point property, so it will not be
automatically rounded to non-fractional values that properly align
to pixels. To fix the resulting blurriness, add explicit rounding.
https://bugzilla.gnome.org/show_bug.cgi?id=768317
Commit 9b07ce1d0d changed the OSD window's level bar to be a regular
actor instead of a custom drawn bar. The bar actor's width depends on
both the configured level (e.g. 40%) and the available width, however
the width is currently only updated when the configured level changes.
Fix that by properly considering changes to the parent's width as well.
https://bugzilla.gnome.org/show_bug.cgi?id=768317
Commit c39ffa111 moved the signal handling from the controls- to the
background-group to enable scrolling on non-primary monitors.
However this broke scrolling on reactive overview elements as the
workspace switcher, as they're not descendants of the background.
To fix, move scroll-event handling to the overview group itself,
which is the common ancestor of all overview elements.
https://bugzilla.gnome.org/show_bug.cgi?id=768316
When we restart, we need to update the struts for the screen before
we enter the main loop, or maximized windows will get resized to the
size of the screen without struts, then resized back.
A workaround is needed for a Clutter bug that occurs when we get
the size of an actor before the first paint of the stage.
https://bugzilla.gnome.org/show_bug.cgi?id=761566
The memory which MetaBackground resides is freed automatically, when its
wrapper object Background is freed by garbage collection. But because the
memory for MetaBackground is huge, changing the background or changing the
background mode repeatedly makes a lot of memory to be in use until garbage
collection runs.
This patch frees the MetaBackground object explicitly when its
MetaBackgroundActor is destroyed which is the moment that the memory in the
object is not used anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=766353
Signed-off-by: Hyungwon Hwang <hyungwon.hwang7@gmail.com>
This isn't a performance critical actor and the NVIDIA driver discards
offscreen buffers in some cases which would require us to go through
extra hoops to handle here which isn't worth it.
https://bugzilla.gnome.org/show_bug.cgi?id=739178
It is odd to switch workspaces on the primary monitor when panning on
a monitor without workspaces, so reject the gesture on non-primary
monitors when workspaces-only-on-primary is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=766883
It is odd to switch workspaces using the scroll wheel when the pointer
is on a monitor without workspaces, so only handle scroll events on
non-primary monitors when workspaces-only-on-primary is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=766883
We allow activating a workspace by clicking it when we know that
the user did not try to select a window and missed (namely: the
workspace is empty). However we currently always check for an
empty workspace on the primary monitor, which doesn't make sense
when the click happened on a different monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=766883
Both the Overview::scroll-event and actions added via addAction()
are meant to work anywhere in the overview, but for now only work
on the primary monitor. Move the handling to the background group
that is known to span all outputs to fix.
https://bugzilla.gnome.org/show_bug.cgi?id=766883
The stack was used to overlay a message indicator over the overview
group. That indicator is long gone, so there's no longer a need for
an intermediate actor in the hierarchy.
https://bugzilla.gnome.org/show_bug.cgi?id=766883
Initializing the upper bound to zero means that on panning we'd start
scrolling from the first workspace even if the current workspace when
entering the overview was different since StAdjustment clamps the
value to be inside bounds.
https://bugzilla.gnome.org/show_bug.cgi?id=766883
If the source actor is destroyed while the popupMenu is shown -- this
can happen if a non favorite application was closing or crashes -- the
menu actor is improperly destroyed.
This makes the popupMenu close first and does a clean ungrab instead.
https://bugzilla.gnome.org/show_bug.cgi?id=757556
The various switcher keybindings are handled identically, except for
the popup that is shown; update the code to reflect that instead of
duplicating the code again and again.
https://bugzilla.gnome.org/show_bug.cgi?id=730739
The code to handle cycling through windows without showing a popup
was removed from mutter a while ago, which left the corresponding
keybindings mostly broken (i.e. they now only switch between two
windows). With the various switch-foo keybindings handled by the
shell, it is now easier to take over the cycle-foo keybindings as
well.
https://bugzilla.gnome.org/show_bug.cgi?id=730739
Logind recently got support for a hint property in Session Object to
inform if session is Locked or not. It is up to desktop environments
to keep this property up to date.
https://bugzilla.gnome.org/show_bug.cgi?id=764773
If the drag actor is destroyed before the animation
callback is called, the callback is never called and
we're sticked with dnd grabing the events after we
dropped the target.
https://bugzilla.gnome.org/show_bug.cgi?id=757676
We currently show the orientation lock button when an accelerometer
is present, however gnome-settings-daemon's xrandr plugin only applies
rotation when a builtin monitor is present. Update the button's
visibility to match gnome-settings-daemon.
https://bugzilla.gnome.org/show_bug.cgi?id=765267
ClutterLayoutManager's size request methods have an additional container
argument before the for-width/height parameters compared to ClutterActor.
https://bugzilla.gnome.org/show_bug.cgi?id=763068
While a channel has pending messages, it will pop up again when
dismissed. That is clearly not what users expect, so clear them
out first before closing a channel.
https://bugzilla.gnome.org/show_bug.cgi?id=747991
Let's make it really simple and ask user interactively, once. This
simplifies things for:
* Privacy panel of gnome-control-center as it doesn't have to filter
applications.
* Apps: If they are denied access, they can simply point users to
privacy panel of gnome-control-center since they can be sure location
access for the app can be enabled in there.
Also it's less annoying to user. Before this patch, if they denied
access to application, they had to keep doing that at least each time
they launched the application.
https://bugzilla.gnome.org/show_bug.cgi?id=762559
Alex told me that since it's not geoclue but rather GNOME-components
storing/accessing app permissions, it's better if we put it under
'gnome' rather than generic 'desktop' table.
Now that we no longer skip dimming/undimming windows while showing
the overview, we can still save a bit of work by changing the dimming
without animation while the window is hidden.
https://bugzilla.gnome.org/show_bug.cgi?id=762475
We skip window animations while the overview is shown (and the window
group is hidden) to avoid unnecessary work. However when an attached
modal dialog is opened or closed, this involves checking whether the
parent window should be dimmed - skipping that test means that we can
simply fail to dim or undim a window altogether, so do that check
unconditionally.
https://bugzilla.gnome.org/show_bug.cgi?id=762475
While we could have implemented this already a while ago, this would
have been a completely false security mechanism since we had no way of
reliably identifying applications. Since now with xdg-app, we can at least
reliably identify bundled applications, let's give users a choice of
which applications in particular they are OK with giving location data
to.
While we still can't reliably identify system (non-xdg-app) applications,
it seems extremely unlikely we'll ever be able to do that (at least not
in the near future) so we'll have to trust them to not lie about their
IDs.
Next release of geoclue will take the ID of bundled application directly
from corresponding xdg-app metadata so bundled applications can't simply
lie about their IDs.
https://bugzilla.gnome.org/show_bug.cgi?id=762119
This class will be responsible for authorizing applications that try to
access location information. Since this is mainly targetted for xdg-app
applications, we make use of xdg-app's D-Bus API to store
per-application authorization.
https://bugzilla.gnome.org/show_bug.cgi?id=762119
Add a dialog that is used in a following patch, to ask user if they want
a requesting application to gain access to their location.
Co-author: Florian Müllner <fmuellner@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=762119
Only recent IBus versions have support for this signal
which is used for wayland clients. In order to work
with older IBus versions we can silently ignore the
signal's absence.
https://bugzilla.gnome.org/show_bug.cgi?id=753476
We lost media controls outside of notification banners when
implementing the new notification designs. Reimplement this
functionality as a dedicated "Media" section in the message
list based on MPRIS.
https://bugzilla.gnome.org/show_bug.cgi?id=756491
Currently both the base classes for messages/sections and the message
list itself that instantiates the available sections are located in
the same module. As a result, it isn't possible to define sections
in a different module without introducing circular dependencies. The
Calendar module is already unwieldily large, so split it up a bit to
avoid it growing even bigger in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=756491
It is not always possible to determine the type of audio device that
got plugged in. Add a system modal dialog to query the user in that
case and export in on the bus to gnome-settings-daemon.
https://bugzilla.gnome.org/show_bug.cgi?id=760284
IBus now provides a new method for cursor positioning where the
coordinates are relative to the focused window. This is useful for
wayland clients which don't have access to their global coordinates.
https://bugzilla.gnome.org/show_bug.cgi?id=753476
We are already emitting a 'drag-end' signal when no more dragging
is happening, so it makes sense to emit a 'drag-begin' too when
starting, so that apps interested in implementing different logic
between those two events can easily do it without needing to deal
with the underlying 'button-press-event' signal for the actor.
https://bugzilla.gnome.org/show_bug.cgi?id=761208
Before reenabling all extensions, we update the list of enabled extensions
to catch any changes that happened while extensions were enabled. However
this is currently broken as onEnabledExtensionsChanged() is a nop while
disabled, so just call getEnabledExtensions() directly.
draggable.startDrag() is called directly here (i.e. manualMode is not set),
we must keep track of the touch event and pass it to startDrag() then.
https://bugzilla.gnome.org/show_bug.cgi?id=756748
We need to keep track of the pointer emulating touch sequence. In order
to have events properly redirected on touch devices, the
Clutter.grab_pointer and ungrab_pointer() have been replaced by the grab()
and grab_sequence() ClutterInputDevice methods, one or the other is used
depending on the device triggering DnD.
An extra "sequence" argument has been added to startDrag, passing null here
will resort to pointer grabs.
This is enough to make thumbnails in the WorkspaceBox draggable through
touch.
https://bugzilla.gnome.org/show_bug.cgi?id=756748
It overrides ::button-release-event in order to implement the
hidden/shown toggling, it must do the same on TOUCH_END, otherwise
menus stay shown on touch.
https://bugzilla.gnome.org/show_bug.cgi?id=756748
This works for pointers and touch on X11, there is however no pointer
emulation on evdev, so touch triggers ::clicked with button==0 which
is ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=756748
Animated backgrounds are based on a start time in local time - in case
of a timezone change, that time is no longer accurate. To fix, we need
to either make BGSlideShow aware of timezone changes (and notify us to
update the animation), or just reload the animation - timezone changes
should be a rare event, so go with the simpler second option.
https://bugzilla.gnome.org/show_bug.cgi?id=758939
Any time estimates we can come up with are notoriously unreliable;
even on devices that report correct (dis)charging rates, any change
in workload, screen brightness etc. can throw our estimate off by
a huge amount. This is further compounded by bad firmware and battery
firmware which reports inaccurate data as neither Windows nor Android do
not use that data.
So instead, limit ourselves to only showing the current percentage
and leave its interpretation to the user.
As an added bonus, we end up with shorter strings that are less likely
to cause problems with ellipsization when translated.
https://bugzilla.gnome.org/show_bug.cgi?id=708472
Builtin chat and network notifications already follow the notification
policy of appropriate applications, it makes sense to do the same for
autorun notifications to give users control over hotplug notifications
in Settings.
If we detected that Bluetooth devices were setup, show the Bluetooth
menu so that users can easily turn Bluetooth back on.
This is a bit of a hack, as we cannot detect whether there is a
Bluetooth adapter at all when it's disabled, so we cannot tell whether
there were any Bluetooth devices setup, at some point. This state is
saved in the gnome-shell GSettings in the had-bluetooth-devices-setup
key.
Checking whether we saw Bluetooth devices at one point is a good
enough guess of whether there will be some in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=723848
It's very unexpected that a spinner animation would
preempt idles from running.
This commit runs the spinner animation with a low
priority to ensure it doesn't take over the main
loop.
https://bugzilla.gnome.org/show_bug.cgi?id=754814
