When set to fill, the label will always end up left-aligned, which
is only correct in LTR locales. Set the alignment explicitly to
work in both RTL and LTR locales.
https://bugzilla.gnome.org/show_bug.cgi?id=712579
When set to fill, the label will always end up left-aligned, which
is only correct in LTR locales. Set the alignment explicitly to
work in both RTL and LTR locales.
https://bugzilla.gnome.org/show_bug.cgi?id=712596
When set to fill, the label will always end up left-aligned, which
is only correct in LTR locales. Set the alignment explicitly to
work in both RTL and LTR locales.
https://bugzilla.gnome.org/show_bug.cgi?id=712638
Filtering out "non-interesting" windows beforehand as we currently do
means that we may get properties that should be based on all windows,
like the last time the application was used, wrong.
Just track all windows and filter out non-interesting windows manually
in the one place we actually care about the difference.
https://bugzilla.gnome.org/show_bug.cgi?id=719824
As far as I can tell, the only behavior change of a transient source
is that they auto-destroy after viewing their summary box pointer.
Since all transient sources are only associated with transient
notifications, it seems that we can never get to their summary box
pointer in the first place! Remove support for this.
https://bugzilla.gnome.org/show_bug.cgi?id=710115
Rather than implement special focus policies like only allowing keynav
when pressing down, simply give the active page key focus when entering
the overview.
This may break stuff, as it's somewhat of a tricky patch to get right.
Testing this one would be super appreciated.
https://bugzilla.gnome.org/show_bug.cgi?id=644306
Simply use St's existing key navigation system by making all the window
clones StWidgets, and making the WorkspacesView a focus group.
Since the workspace view is effectively "fake", we need to add a focus
delegator so that when key focus is assigned to the fake workspaces page,
we can keynav inside it properly.
https://bugzilla.gnome.org/show_bug.cgi?id=644306
For mysterious reasons I'm not sure of myself, navigate_focus will only focus
mapped actors. So, make sure the widget is showing before navigating to it.
https://bugzilla.gnome.org/show_bug.cgi?id=709853
If the background is already removed, or we're trying to remove bad content,
this is probably a bug in content accounting, so let us crash so we can fix
the bugs.
https://bugzilla.gnome.org/show_bug.cgi?id=719803
Stomping on local variables and trying to keep loop state isn't
too fun. Just use a new variable here so we aren't too confused
with what we're doing.
https://bugzilla.gnome.org/show_bug.cgi?id=719803
We don't have any better way of determining whether something is a slideshow
animation, so discriminate on the .xml filename instead of waiting for
gdk-pixbuf to determine whether it can load a file or not.
https://bugzilla.gnome.org/show_bug.cgi?id=719803
The destroy vfunc might be called during object finalization, and
we can't call any JS from a GC finalizer, so we use a signal
connection instead, as that is removed by GObject the first time
the object is disposed.
https://bugzilla.gnome.org/show_bug.cgi?id=719730
AppDisplay queues a deferred work to load frequently used apps when the
apps page is loaded. Unfortunately, when the overview is first opened,
all the pages start out visible and then immediately get hidden, so the
deferred work runs immediately after the first overview opening, whether
the user was going to view their frequent apps or not.
Start all pages off as hidden, and rearrange the code so that pages are
only shown when they really need to be.
https://bugzilla.gnome.org/show_bug.cgi?id=712753
This is also exposed in the ShowOSD DBus method, the "monitor"
parameter may contain an integer to indicate the monitor number.
If the value is not provided or <0 is used, the monitor is shown
on the primary monitor as usually.
This way, the OSD can be used to notify upon events that solely
apply to one monitor, like tablet mapping as discussed in
https://bugzilla.gnome.org/show_bug.cgi?id=710373.
https://bugzilla.gnome.org/show_bug.cgi?id=712664
You would think we would already do something like this, but apparently
lots of code was calling hide() without checking if the box pointer was
already visible, causing it to queue a full tween. The biggest win was
with ibusCandidatePopup.js, which called hide() on every DBus message.
This increases the performance for me to enter the overview by a tiny
bit. The remaining time is spent updating the frequent apps / all apps
display.
https://bugzilla.gnome.org/show_bug.cgi?id=712727
The methods we call in _updateState may not be reentrant, so make
sure that we never get into a situation where _updateState, through
some crazy chain of events, calls itself.
https://bugzilla.gnome.org/show_bug.cgi?id=711694
Rather than scanning all apps for searching, use Ryan's new desktop
file index and the glib support APIs for app searching instead of our
own system.
https://bugzilla.gnome.org/show_bug.cgi?id=711631
If monitor-changed fires at startup, it will destroy all of the
backgrounds, but since this._isStartup is true, won't recreate any
of them. Additionally, since _bgManagers is indexed by monitor index,
if the primary index is not 0, it could become a sparse array (e.g.
[undefined, undefined, primaryBackground]), and our for loop will
crash trying to access properties of undefined.
Fix both of these issues by always creating background managers for
every monitor, hiding them on startup but only showing them after
the startup animation is complete.
One thing we need to watch out for is that while LayoutManager is
constructing, Main.uiGroup / Main.layoutManager will be undefined,
so addBackgroundMenu will fail. Fix this by passing down the uiGroup
to the background menu code.
https://bugzilla.gnome.org/show_bug.cgi?id=709313
If desktop icons are enabled and not covered by maximized windows,
we will fade them in/out during overview transitions. However when
moving background handling into mutter/gnome-shell, we ended up with
the overview background on top of the DESKTOP window clone, hiding
the fade transition.
Fix the stack order to bring the effect back.
https://bugzilla.gnome.org/show_bug.cgi?id=707671
Our gnome-shell tweener integration has had hooks to determine when
the tweens have started and completed... except that they had a bug
in them. When a tween completed, it queued an idle handler to run
the callback in. If no tweens were running when the idle was removing,
it reset the tween state that contained the idle handler ID. It also
returned false, meaning that the source would always get removed.
If the actor had a tween in-flight when the idle was fired, it wouldn't
clean up after itself. While this is also a simple bug fix, remove the
callback so we don't queue unnecessary, unused idles.
https://bugzilla.gnome.org/show_bug.cgi?id=711732
Removing an existing source before scheduling a new one is not wrong,
but slightly less effective than doing nothing and relying on the
previously created source to do the job.
https://bugzilla.gnome.org/show_bug.cgi?id=711555
As the handler returns false, the corresponding source is removed
automatically and its id invalidated. Reset the id to 0 to reflect
this, otherwise newer versions of GLib will print a warning when
we later try to remove it explicitly.
https://bugzilla.gnome.org/show_bug.cgi?id=711555
There's a potential race condition in the search code: if we have an
outstanding search call to a provider for search "A", and if before it comes
back we do a subsearch for "AB", we won't have any results to pass along.
Previously, we used an empty list when storing the provider results, so we
effectively told the remote search app to filter through this empty list for
any search results that meet the new query, meaning we showed the user 0
results for the provider in this case.
Now that we don't store an empty list, but instead store `undefined`, this race
raises a warning. Solve it by doing an initial search query in this case
instead.
The search code isn't too smart about chained subsearches: now, if we hit this
race while already on a subsearch, we'll do an initial search for the subsearch
query instead, but that is much better than showing the user nothing. This
could be fixed in the future for a performance improvement.
Reviewed-by: Florian Müllner <fmuellner@gnome.org>
When a notification becomes expanded, it's either already shown,
or in the process of being shown. Don't set the state to SHOWING
again, which confuses our state machine.
The asynchronous nature of extension loading, session loading, and more,
makes the code racy as to what is initialized first, and hard to debug.
Additionally, since gjs is single-threaded, the only code we're running
in a thread anyway is readdir, which is going to be I/O bound, so the
code here is actually likely to be faster.
Drop this in favor of some good old fashioned synchronous loading.
We currently only ensure that width and height are positive, so it
is still possible to pass in values that don't make any sense at all
(which may even result in a crash when exceeding limits imposed by
X11).
There is nothing to screenshot outside the actual screen area, so
restrict the parameters to that.
https://bugzilla.gnome.org/show_bug.cgi?id=699752
We want to move away from gnome-menus eventually, so the simple
utility method isn't really worth keeping around. Reimplement it
in the one place that uses it.
https://bugzilla.gnome.org/show_bug.cgi?id=698486
Long ago, the search system worked in a synchronous manner: providers
were given a query, and results were collected in a single array of
[provider, results] pairs, and then the search display was updated
from that.
We introduced an asynchronous search system when we wanted to potentially
add a Zeitgeist search provider to the Shell in 3.2. For a while, search
providers were either async or sync, which worked by storing a dummy array
in the results, and adding a method for search providers to add results
later.
Later, we removed the search system entirely and ported the remaining
search providers to simply use the API to modify the empty array, but the
remains of the synchronous search system with its silly array still
lingered.
Finally, it's time to modernize. Promises^WCallbacks are the future.
Port the one remaining in-shell search engine (app search) to the new
callback based system, and simplify the remote search system in the
process.
`a + b ? c : d` is parsed as `(a + b) ? c : d`, not the more intuitive
`a + (b ? c : d)`.
This was causing a bad slide animation and Clutter warnings when coming
out of the overview.
The org.gnome.login-screen schema contains a key to disable the
power/restart buttons; our support for this fell victim to the
new combined status menu, add it back.
https://bugzilla.gnome.org/show_bug.cgi?id=711244
Before, workspacesOnlyOnPrimary was implemented in quite a crazy manner:
* If workspacesOnlyOnPrimary was false, we'd create one WorkspacesView per
monitor, with the primary one being a bit special.
* If workspacesOnlyOnPrimary was true, we'd create one WorkspacesView, and
additional montiors would be handled inside that WorkspacesView as
"extra workspaces".
This caused numerous bugs as the two modes weren't consistently
implemented, and a lot of code was duplicated between all the modes.
Fix this by always creating WorkspaceViews, even if it only handles
one interface. We do this by having two different WorkspacesView-ish
classes: WorkspacesView handles the traditional combination of lots
of workspces, and a new ExtraWorkspaceView is in control of only one
workspace.
Right now, the workspace update code is complex and spread across parts:
WorkspacesView takes a set of workspaces and looks like it owns them, but
WorkspacesDisplay is actually in charge of setting them up and creating
new ones for each WorkspacesView.
Change initialization and handling to move all of the creation/destruction
responsibilities to WorkspacesView.
We pass in monitorIndex into each WorkspacesView, which is a lie in the
workspacesOnlyOnPrimary case, as the primary WorkspacesView currently has
the responsibility of handling the extra workspaces on all the other
monitors. The commit will clean this up and punt the responsibility back
to WorkspacesDisplay.
Not because ClutterActor is bad or wrong, but because I always get
confused on the difference, and having them both in SlideLayout
makes the code a bit easier to read and understand.
The parent SlidingControl had an onOverviewShowing, but we had
overridden it with the same code in both subclasses. Just move it
back to SlidingControl.
When we create a result actor, cache it, so it can be used for
subsearches of the same initial. For now, to keep memory usage
and the stage graph relatively clean, don't persist the actors
across searches, but maybe we should do this in the future.
This also means that we don't query getResultMetas for items
that we've seen in the same initial search.
https://bugzilla.gnome.org/show_bug.cgi?id=704912
The existing provider system is split between a confusing mess of
RemoteSearch, SearchSystem, SearchDisplay, and ViewSelector, partly
because of the vestigal in-shell search system. Move most of the
logic to search.js so it's easier to read.
We fetch and store the list of providers from the search system when we
construct SearchResults, but we never update this list when providers are
changed at runtime, causing various bugs making the search not seem as
snappy as it should be. Make sure to always fetch the list of providers
from the search system.
While the existing comment is correct in that a source's notifications
will be destroyed first, the code takes a shortcut which prevents the
Source::count-updated signal from being emitted. Given that the purpose
of the signal is to keep notification counters up-to-date which is
pointless when the source is about to be destroyed, the shortcut makes
sense; just save notifications explicitly in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=710596
search.js used to do a lot more, but now that most of the
functionality has been moved to the remote search system,
it doesn't do a lot. Merge searchDisplay.js into it.
It's been broken for quite a bit since we removed Panel.Animation,
and hasn't really ever worked with our new search results. It's also
the only non-remote provider left.
Maybe we'll add it back as a remote provider later, but for now, just
ditch it.
The new API is designed to support features like persistence and uses
the new org.freedesktop.Application specification for activating
actions on notifications. While we won't add support for persistence
yet, implement the new notification spec with parity of the old one.
https://bugzilla.gnome.org/show_bug.cgi?id=710137
Some consumers may want to construct their buttons specially, so allow them
to do that by adding a new API that takes a button instead of a label.
https://bugzilla.gnome.org/show_bug.cgi?id=710137
Their use blocks activation of the default button by keyboard, which
is important for accessibility. Use a Clutter.ClickAction instead,
which doesn't have this problem as it only considers mouse events.
https://bugzilla.gnome.org/show_bug.cgi?id=710144
Otherwise, when closing the tray, we'll try to focus an actor, which will
focus the stage window, which will drop the focus from whatever window we
already had focused.
https://bugzilla.gnome.org/show_bug.cgi?id=710347
The application picker will always open with the view that was last
selected during the session, but the selection is reset on each
restart. This results in some annoyance for users that use the
ALL view exclusively, as they have to toggle views once each
session - the same would apply to exclusive FREQUENT view users
were the defaults to be changed, so the best solution is to simply
make the selected view persistent by storing it in GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=710042
If we pushNotification the same notification multiple times, we
won't append it to the array again, but we will attach multiple
handlers needlessly.
https://bugzilla.gnome.org/show_bug.cgi?id=710115
oVirt is software for managing medium-to-large scale deployments of
virtual machine guests across multiple hosts. It supports a feature
where users can authenticate with a central server and get
transparently connected to a guest system and then automatically get logged
into that guest to an associated user session.
Guests using old versions of GDM support this single-sign-on capability
by means of a greeter plugin, using the old greeter's extension
API.
This commit adds similar support to the gnome-shell based login screen.
How it works:
* The OVirtCredentialsManager singleton listens for
'org.ovirt.vdsm.Credentials.UserAuthenticated'
D-Bus signal on the system bus from the
'org.ovirt.vdsm.Credentials'
bus name. The service that provides that bus name is called
the oVirt guest agent. It is also responsible for interacting
with the the central server to get user credentials.
* This UserAuthenticated signal passes, as a parameter, the a token
which needs to be passed through to the PAM service that is specifically
set up to integrate with the oVirt authentication architecture.
The singleton object keeps the token internally so it can be queried
later on.
* The OVirtCredentialsManager emits a signal 'user-authenticated' on
it's object once the dbus signal is triggered
* When the 'user-authenticated' signal is emitted, the login screen
tells GDM to start user verification using the PAM service. The
authentication stack of the service includes a PAM module
provided by oVirt that securely retrieves user credentials
from the oVirt guest agent. The PAM module then forwards those
credentials on to other modules in the stack so, e.g.,
the user's gnome keyring can be automatically unlocked.
* In case of the screen shield being visible, it also will react on that
'user-authenticated' signal and lift the shield.
In that case the login screen will check on construction time if
the signal has already been triggered, and a token is available.
If a token is available it will immediately trigger the functionality
as described above.
Signed-off-by: Vinzenz Feenstra <evilissimo@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=702162
Allow the prefix 'special:' applied to result IDs to mark results
that should be always shown, even when they would overflow the
maximum results cap. This will be used by epiphany for the special
"Search the Web" result.
https://bugzilla.gnome.org/show_bug.cgi?id=707055
NotificationDaemon doesn't pass a gicon to the Notification constructor,
because it calls .update() immediately after, so messageTray.js
calls into Source.createIcon(), which returns null and crashes.
Instead, shortcut the Notification constructor by skipping
.update() completely.
https://bugzilla.gnome.org/show_bug.cgi?id=709998
The _background hack was added because the old way the zooming animation
worked, it set the allocation of the workspaces view and thumbnails box
to the final position and used animations to smoothly animate.
During the 3.6 cycle when we added the new search view, Cosimo changed the
way the zoom animation works so that rather than set the final allocation
and animate, we actually do adjust the allocation of the workspaces view
and thumbnails box.
So, as the hack is no longer necessary, we can drop it.
https://bugzilla.gnome.org/show_bug.cgi?id=694881
In order for the workspace thumbnails box to have the correct size,
we need to constrain the width of the thumbnails box to the height we're
given, instead of assuming an unlimited height.
https://bugzilla.gnome.org/show_bug.cgi?id=694881
We cannot wait for the queued update region to fire when
xdnd is being used because a wrong input shape can result
into a xdnd leave event when the user moves the pointer fast.
https://bugzilla.gnome.org/show_bug.cgi?id=708887
Since the agregate menu does 120% of font-size, make this
for all dropdown arrows in gnome-shell and rename the css
class to make clear that it is used in overall gnome-shell
https://bugzilla.gnome.org/show_bug.cgi?id=709564
According to the designs, the notifications switch was supposed
to move from the user menu to the new message tray menu. However
so far the new system status implementation only removed the old
switch, so add it back in its new place now.
https://bugzilla.gnome.org/show_bug.cgi?id=707073
Because of the animation and collision with relayout, the title of windows in overview may not appear, mainly
the first time we enter in overview
With an animation delay of 0.1s, you'll not see the difference
https://bugzilla.gnome.org/show_bug.cgi?id=709392
Show "Hardware Disabled" when disabled by HW switch, and
generically "Disabled" when airplane mode is active, as
indicated by v4 mockups.
Note that bluetooth is not affected by NM handling of airplane
mode (and generally the firmware makes the USB bluetooth
adapter disappear when rfkilled), so this is in NMDeviceModem
instead of NMConnectionDevice.
https://bugzilla.gnome.org/show_bug.cgi?id=709043
Since commit 1242a16265, we will use a fake prompt which
cancels alls requests without dialog when the keyring component
is disabled. However this does only apply to new requests, dialogs
that are already active when the session mode changes are kept
open. This is not quite as expected, so cancel the prompt in that
case.
https://bugzilla.gnome.org/show_bug.cgi?id=708910
The property is on the NMClient, not NMDevice. Also, make sure
we disconnect the signal when the item is destroyed.
Also, connect to wireless-hardware-enabled, which we'll use soon.
https://bugzilla.gnome.org/show_bug.cgi?id=709635
Destroying the notification will make the key focus be reset to NULL, which
means that gnome-shell will try to focus the MRU window, thinking the user is
done interacting and wants to go back to whatever they were doing.
Unfortunately, since we focus two windows at the same time, they will have
the same timestamp, meaning that the window that actually gets focused will
be a race as to whoever responds to their WM_TAKE_FOCUS event last.
If we explicitly set the focus beforehand, then gnome-shell will believe it
got key focus taken away from it, and won't try to focus the MRU when the
key focus drops to NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=703265
We must reduce the forWidth in the call to get_preferred_height()
with the border width, otherwise we might request a smaller height
that we actually need and overflow.
https://bugzilla.gnome.org/show_bug.cgi?id=696564
If the active connection for the device is not the primary or
activating globally, it won't have the _connection and _primaryDevice
expando properties, so grab them from the settings object.
https://bugzilla.gnome.org/show_bug.cgi?id=709043
The patch fixes the following warning, and along with it, the proper
destruction of the NMConnectionSection is performed so that items get
correctly removed from the menu.
(gnome-shell:24528): Gjs-WARNING **: JS ERROR: TypeError:
this.statusItem is undefined
NMConnectionSection<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:173
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
_parent@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:175
NMConnectionDevice<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:292
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
_parent@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:175
NMDeviceModem<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:448
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
NMApplet<._removeDeviceWrapper@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:1421
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
NMApplet<._deviceRemoved@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:1416
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
https://bugzilla.gnome.org/show_bug.cgi?id=709248
Don't assume that this._bgManagers.push() (i.e adding to the end) is always
correct.
On startup we call _createPrimaryBackground which passes in the primary index
which may not be 0.
We connect to the changed signal in _init() but never actually disconnect from
it. The callback has a reference to "this" which results into the background
object not getting garbage collected.
Fix that leaks by disconnecting in _destroy()
https://bugzilla.gnome.org/show_bug.cgi?id=709263
The cover pane is used to block events during transitions, but as
workspaces don't share the same container as other overview elements,
they are currently excempt from the event blocking.
Move the cover pane to the top-level overview container instead.
https://bugzilla.gnome.org/show_bug.cgi?id=709034
Moving the mouse fast enough during xdnd will trigger a xdnd-leave event
because the input shape is not updated until after the animation is done.
So simply ignore the leave events while the animation is in progress.
https://bugzilla.gnome.org/show_bug.cgi?id=708887
This reverts commit e31693bbee.
This doesn't properly adjust the allocation, leading to an unbalanced
overview where things aren't centered properly. Just revert for now,
and we'll rethink this next cycle.
When coming back from search or apps, the workspace thumbnails and dash
don't slide in but "pop in". This is because of bad timing: when slideIn
is called, we immediately start the translation animation, and it
completes before by the time we fade the new page in.
Fix this by calling slideIn and slideOut at two different times: we now
slide out when the old page with our controls is fading out, and slide in
when the new page with our controls is fading in.
https://bugzilla.gnome.org/show_bug.cgi?id=708340
Activating the GDM login screen switches VT and causes X to freeze
event processing (because it lost the drm master), so must make
sure to have painted the lock screen at least once before proceeding,
or the user can go back and see the unlocked desktop.
https://bugzilla.gnome.org/show_bug.cgi?id=708051
gnome-keyring provides a fallback in case our builtin prompt fails
to register, so keyring dialogs may still pop up even when they
are supposed to be disabled.
Instead, keep the prompt registered but cancel requests immediately
while disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=708187
Have AT-SPI calls time out after 250ms, to mitigate the effect of a
deadlock when querying another application that is trying to query
gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=708387
We don't want password entries to grow when entering more characters
that fit the available width; as labels' ClutterText ellipsizes by
default, the password labels allow entries to grow by shrinking.
Setting the appropriate ellipsize mode fixes this.
https://bugzilla.gnome.org/show_bug.cgi?id=708324
We don't want the password entry to grow when entering more characters
that fit the available width; as labels' ClutterText ellipsizes by
default, the password label allows the entry to grow by shrinking.
Setting the appropriate ellipsize mode fixes this.
https://bugzilla.gnome.org/show_bug.cgi?id=708324
We don't make use of any functionality StTable provides over
ClutterTableLayout, so port all users to the Clutter layout
in order to remove our own copy of the code.
https://bugzilla.gnome.org/show_bug.cgi?id=703833
We don't make use of any functionality StTable provides over
ClutterTableLayout, so port all users to the Clutter layout
in order to remove our own copy of the code.
https://bugzilla.gnome.org/show_bug.cgi?id=703833
We already do this for looking glass, but it makes even less sense
for the normal run dialog - if a mode sets runDialog to false, the
intention is to not allow executing aribitrary commands.
https://bugzilla.gnome.org/show_bug.cgi?id=708218
Previously the animation was not entirely according to the mockup.
Now we are closer to the mockup.
The padding for the indicators are decremented, since we need that
to make the animation not too quick. As a drawback, maybe visually
is not as good as before, or the area to click dots is too much little.
Just make that change for now and test it widely, and we can change
that after.
https://bugzilla.gnome.org/show_bug.cgi?id=707565
The original position was calculated with the stage and the
transformed position of the indicator when mapped. The values
were wrong on some situations, so lets calculate the position
based on the dots width.
https://bugzilla.gnome.org/show_bug.cgi?id=707580
We currently update workspaces geometry when we are notified about
allocation changes of the overview group; however as the geometry
is based on stage coordinates, we miss notifications when the
allocation relative to the parent is unchanged, which happens when
the primary monitor's position changes but not its resolution.
Use a custom layout manager to give us a signal that is emitted
reliably.
https://bugzilla.gnome.org/show_bug.cgi?id=708009
We need to adjust the offset of close buttons, in case the box
pointer has the arrow at the top. To do so, extend close buttons
to hook into a boxpointer (since that's the common use for them)
and automatically adjust their position.
https://bugzilla.gnome.org/show_bug.cgi?id=707842
Gdk uses Xwayland, so it only sees the events we forward to X11
clients. Instead, we can use the abstraction API provided by
mutter and get the right value automatically.
Also, we need to use MetaCursorTracker to handle the cursor
visibility too.
https://bugzilla.gnome.org/show_bug.cgi?id=707467
I thought that cancelDrag was called for completed drags as well,
but it's not. Move the updateHoverId source removal to dragComplete.
This fixes "this._dragActor is undefined" warnings after completed
drags.
https://bugzilla.gnome.org/show_bug.cgi?id=707935
For extremely silly reasons with how the class framework works, the wrapper
method requires "this" to be bound in order for it to work, or else we'll
emit errors in strict mode.
https://bugzilla.gnome.org/show_bug.cgi?id=707892
It is expected that the primary and secondary icons in entries
change places in RTL locales. When doing so, the edit-clear
icon must be replaced by an rtl variant too.
http://bugzilla.gnome.org/show_bug.cgi?id=705779
Before, separators naively checked whether their siblings were visible
using actor visibility. However, if section actors are visible but have
no visible children, this will fail. Special-case separators when doing
visiblity checks.
https://bugzilla.gnome.org/show_bug.cgi?id=707801
When we show(), we need to make sure that the hiding animation
doesn't reach the end, otherwise we would hide the actor but
still have _visible = true.
We were relying on tweener overwriting to do this, but it
doesn't quite work, so better be explicit and do it ourselves.
https://bugzilla.gnome.org/show_bug.cgi?id=707814
Just as we do in AllView, we set the offset of FolderViews' fade
effect so that no icon is faded when a full page is visible.
This works fine in AllView, however in the FolderView case where
the popup's offsets eat away from the available fade height, the
effect ends up being barely noticeable at all.
While it is not ideal to apply the fade to the edge of a "full page",
it looks less ugly than the current state, so pick the lesser evil ...
https://bugzilla.gnome.org/show_bug.cgi?id=707662
Since now if you focus the indicators, you can't scroll and
change pages in the app picker. That was reported as odd from
some users/developers.
So allow to scroll when the focus is in the indicators.
https://bugzilla.gnome.org/show_bug.cgi?id=707609
A11y users who use the magnifier may have trouble
focusing when they're typing or trying to keynav.
Implement a new system so that they can have the
magnifier track the caret and focus instead instead
of just the mouse.
Bug https://bugzilla.gnome.org/show_bug.cgi?id=647074
While this is good style anyway, after the latest appDisplay changes
the first call to get_preferred_height() happens before we properly
compute those properties, resulting in a size request of NaN that
triggers a Clutter warning.
ClutterActor::scroll-event has a boolean return value to indicate
whether the event has been handled, or event emission should continue.
Now that we are using an StScrollView, we depend on this to avoid
propagating the event to the view's own handler.
https://bugzilla.gnome.org/show_bug.cgi?id=707409
It doesn't make sense to show the indicators in that case, so
don't show them. This has been the design in the first place,
but the code that did that was lost at some point during review ...
https://bugzilla.gnome.org/show_bug.cgi?id=707363
The frequent view is not useful when it doesn't contain any applications
yet. While the previously added label makes this state appear less like
an error (OMG, my apps are gone!), it doesn't address the issue of
usefulness - default to the more helpful All view in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=694710
Similar to adapting the spacing dynamically to the available
space we already do, scale down icon sizes if the grid is too
small to fit the requested minimum number of rows/columns.
https://bugzilla.gnome.org/show_bug.cgi?id=706081
IconGrid has never really been a general purpose container, but has
always been used in conjunction with BaseIcon. IconGrid will soon
gain the ability to adjust the item size dynamically to adapt to the
available space, which will require that we can make some more
assumptions about the items added to the grid (namely: we need
access to BaseIcon's setIconSize() method).
So change addItem() to take an object instead, which should have
an actor and a (BaseIcon) icon property.
Based on a patch by Carlos Soriano.
https://bugzilla.gnome.org/show_bug.cgi?id=706081
Add methods to open/close extra space for n rows. The app picker
will use those to make AppFolder popups appear inline with the
main grid rather than on top of it.
https://bugzilla.gnome.org/show_bug.cgi?id=706081
The popup of the FolderView is now contained inside
the parent view, solving the overflow of apps with a ScrollView.
Also, solved a lot of bugs in popup/FolderView calculation
of position and size.
https://bugzilla.gnome.org/show_bug.cgi?id=706081
Add a property to also add the calculated spacing
around the grid.
This will allow FolderView to be aligned with the
main grid without cutting off any of the surrounding
boxPointer decorations or the close button
https://bugzilla.gnome.org/show_bug.cgi?id=706081
When we adapt the grid to different display sizes,
we don't want the number of displayed items to get
too small. In the future we will scale down icons to
make sure that the grid fits add least minRows
x minColumns items, but for now we only take the
properties into account when calculating the dynamic spacing.
https://bugzilla.gnome.org/show_bug.cgi?id=706081
Organize applications in AllView by pages using the new PaginatedIconGrid
added previously. Pagination is generally a better pattern for collections
than scrolling, as it better suits spacial memory.
Hook into AppDisplay's allocation function to communicate the available
size to the different views before child allocations - this is only
required by the paginated view (as pages must be computed before
calling get_preferred_height/get_preferred_width), but doing it for
all views will guarantee that their dynamic spacing calculation is
based on the same values.
https://bugzilla.gnome.org/show_bug.cgi?id=706081
Since the parameter of the function is the width, reflect that in
the function name. Also, since we are counting columns, not only
children for each row, reflect that in the function name also.
https://bugzilla.gnome.org/show_bug.cgi?id=706081
The new PaginatedIconGrid class acts as a container for pages.
So the new class provides the container behaviour and some
useful functions like positions of pages, number of pages, etc.
But, it doesn't add indicators of the pages and doesn't manage
the scroll of the pages, neither any management of the pages
like in which page currently it is, etc.
https://bugzilla.gnome.org/show_bug.cgi?id=706081
This method, which accepts a .desktop filename, is used to highlight
a specific application in the overview, for example because it has
just been created or installed.
https://bugzilla.gnome.org/show_bug.cgi?id=654086
We added special code to sort each row in the overview so that
windows were less likely to cross lines, but the awkward control
flow meant that everything but the last row got sorted.
https://bugzilla.gnome.org/show_bug.cgi?id=707197
Activating the overview is fairly easy (hot corner, <super>), so doing it
automatically after closing the last window on a workspace does not save
a lot of effort; it does result in a surprising context switch when the
user does not expect the behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=662581
We watch changes in the VPN state, not the active connection state,
so if we use the active connection state, we might miss an update
(because the VPN property is notified before the other one)
https://bugzilla.gnome.org/show_bug.cgi?id=706262
Descriptions are only added after all devices are read (thanks
to the disambiguation in libnm-gtk), but we use them immediately
when we call _sync() in various points (such as checkConnection())
https://bugzilla.gnome.org/show_bug.cgi?id=706262
Build gnome-shell for x11, and gnome-shell-wayland for wayland
(as well as the associated libgnome-shell and libgnome-shell-wayland).
The first one links to libmutter, the second to libmutter-wayland.
libgnome-shell and libgnome-shell-wayland are now compiled from
libgnome-shell-base (with all sources that are independent of mutter),
libgnome-shell-menu (with the copy-pasted gtk sources), plus the
sources that use mutter API
https://bugzilla.gnome.org/show_bug.cgi?id=705497
These cause annoying allocation cycle warnings, and it's simpler to
just express our desired layout in terms of nested containers.
Adapt the theme to match as well.
https://bugzilla.gnome.org/show_bug.cgi?id=706843
We slide the shield over it, so the animation is rarely seen, and
since no other actor is under the lock screen, the not-cleared stage
can show through, causing weird issues when trying to blend.
https://bugzilla.gnome.org/show_bug.cgi?id=706841
When we implemented the new designs, we lost the ability to suspend
from the system menu. Re-enable this ability by re-adding the hidden
"Alt" shortcut item.
https://bugzilla.gnome.org/show_bug.cgi?id=706612
We show a lightbox when we suspend, to animate the fading to black
caused by turning off the monitors, but we need to hide it when
coming back, otherwise the user is just staring at a black screen
it until he moves the mouse or presses a key.
https://bugzilla.gnome.org/show_bug.cgi?id=706654
Sometimes gnome-session hands us a bad object path for JIT inhibitors
it creates for XSMP clients. While this is a bug in gnome-session, we
shouldn't show an empty-looking dialog here.
https://bugzilla.gnome.org/show_bug.cgi?id=706612
When locking manually (or locking with an animation), fade the
screen to black after a small timeout. This provides a smoother
experience, instead of abruptly turning off the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=699112
Unfortunately, display configuration can and does fail, due
to unspecified HW constraints, drivers bugs, unsupported exotic
configurations or just bad luck.
So when the user makes a change in the control center, show
a dialog asking him if it looks OK, and revert back after 20 seconds
otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=706208
All our modal dialogs are given a fixed width and grow vertically
as necessary. Set the request mode accordingly, so that wrapped
labels are considered correctly during size request, and not only
at allocation time (where they'll either take away from the padding
or even cause the dialog to overflow).
https://bugzilla.gnome.org/show_bug.cgi?id=704015
The only point of using a custom container here was to prevent StBoxLayout
from enforcing the wrong request mode based on the orientation. With that
issue fixed, we can simplify the checkbox widget significantly.
https://bugzilla.gnome.org/show_bug.cgi?id=703811
Replace more direct XFixes usage with a the appropriate abstraction
API from mutter, which is guaranteed to work in wayland too.
It doesn't yet replace pointer position tracking, although probably
it should.
Also, because now we're using Mutter API, we lose the standalone
test case.
https://bugzilla.gnome.org/show_bug.cgi?id=705911
Mutter now includes an object with the same purpose and functionality
as ShellXFixesCursor, so we can replace our XFixes code with it
and work under wayland too.
https://bugzilla.gnome.org/show_bug.cgi?id=705911
Triangles should be flipped in RTL. This is the easiest way to do it that
doesn't rely on modifying the rotating logic, though it is a bit hacky since
the ClutterActor "scale-x" property technically considers the lower bound
to be 0. It works, though.
GrabHelpers use a 'captured-event' to steal events and emulate
modality or grab-like semantics. There can be issues when you try to
use multiple GrabHelpers stacked on each other. As Clutter follows
the DOM-like semantics of "first come, first serve", when a second
GrabHelper connects to 'captured-event', its callback will only be
processed *after* the first GrabHelper's callback is called.
This breaks the expectation of narrowing modality where new modals
take priority over the old ones.
Solving this globally in a cleaner manner would require a rewrite of
pushModal/GrabHelper. As a stopgap fix for now, use one shared
'captured-event' handler between all GrabHelper instances, and
delegate to the individual GrabHelpers.
https://bugzilla.gnome.org/show_bug.cgi?id=699272
This commit detects when a user inserts a smartcard,
and then initiates user verification using the gdm-smartcard
PAM service.
Likewise, if a user removes their smartcard, password verification
(or the user list depending on auth mode and configuration) are initiated
https://bugzilla.gnome.org/show_bug.cgi?id=683437
This commit introduces a new BeginRequestType enum which gets
passed to the 'reset' signal to specify whether
a username should be provided to the begin() method and changes
the loginDialog to comply.
Currently, the signal only ever gets emitted with
AuthPrompt.BeginRequestType.PROVIDE_USERNAME
but that will change in the future when providing smartcard
support.
https://bugzilla.gnome.org/show_bug.cgi?id=683437
We currently emit "failed" any time the UserVerifier is reset,
and user verification didn't succeed prior.
A more conceptually clear time to emit "failed" would be if
the UserVerifier is reset and user verification failed prior,
and to emit "failed" if the user cancels unlock.
This commit restructures things to do that. Aside from being
more conceptually clear, it also lays the groundwork for us
to be able to reset the unlock screen without failing.
https://bugzilla.gnome.org/show_bug.cgi?id=683437
If we don't have a connection at startup or we transition from
having a connection to not having a connection, we need to make
sure we hide the correct indicators.
_updateState has a lot of variables that sort of gunk up the
code and make it more unreadable than need be. Clean up the logic
a lot by moving those variables into the places that they actually
matter, renaming them to remove prefixes, and remove some conditions
that are always met.
Right now the code chooses to animate based on whether or not the
notification was "removed", which is quite a sketchy subject. For
now, add an additional case so that we don't animate when we transition
to the lock screen.
When the triangle rotates (when sub-menu is expanded), it seems as if
the triangle pivots from one corner even though rotation center is set
to Clutter.Gravity.CENTER. Hence the rotation center is set nearer to
the edge than to the corner ([0.3, 0.5] instead of [0.5, 0.5]) so that
it doesn't appear odd.
Also pivot_point is used instead of rotation_center_z_gravity as it is
deprecated.
http://bugzilla.gnome.org/show_bug.cgi?id=703109
This will replace the indicator painted on the stage right now.
This unfortunately does not work for the recorder triggered by the
keybinding -- we'll simply replace the in-shell code with a keybinding
powered by gnome-settings-daemon.
The existing app menu was a kludge of legacy code that tried to manage
a bunch of state, and had a number of issues:
* It didn't properly manage visibility when combined with multiple
apps and the overview.
* It didn't properly manage reactivity when tabbing away from a busy
app to another app.
* It didn't properly disconnect signals when going from one app
to nothing.
and countless others. Rewrite it to use the new "sync" code pattern,
where we centralize all state management and do transitions from that,
rather than strange and quirky control flow.
https://bugzilla.gnome.org/show_bug.cgi?id=705898
Make the lock dialog group reactive, to intercept any events
before they go to the actors below.
In the future, we may restructure our chrome to have a clear
layer system, but for now it fixes a security issue in the lock
screen (you can see the contents of the windows by dragging
if the screen was locked with the overview active)
https://bugzilla.gnome.org/show_bug.cgi?id=705840
There's only two uses of the parameter left, which can easily be added as a
separate line below. Since it's really a private interface meant for the
indicators, make it private as well so external users are less likely to
use it.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
To align the arrows, we need to allocate panel buttons the full
height of the tray. Fix up all of the panel buttons to support this,
and align the arrows in the middle.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
Swap out the implementation of SystemIndicator with a dummy,
and build the aggregate menu. At the same time, remove the
poweroff and login screen menus, as those were fake aggregate
menus beforehand.
We lose some flexibility as we lose session-mode-based menu
layout, but as each component of the aggregate menu is supposed
to be "smart" in response to updating itself when session
state changes, I believe it's better than a declarative model.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
We can't silently replace the old behavior of separate status
icons into a new system. Replace SystemStatusButton with a new
SystemIndicator class which will allow for the flexibility we
need. For now, make it a subclass of Button so that it mostly
feels the same, but we'll soon be swapping it out with a dummy
implementation that the aggregate menu will use.
I think the code cleanup here is worth it.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
This code is too complicated to keep, and the last straw came after the
fixed width menu in the aggregate menu design.
This will break some existing popup menus that rely on the fixed width,
but this will soon be replaced with the aggregate menu. We'll also soon
clean this up further by replacing PopupBaseMenuItem's custom layout code
with an StBoxLayout.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
Showing the new message at full size marks an abrubt change and looks
bad. Instead, gradually animate from 0px to full natural height.
Includes hacks to workaround flickering scrollbars while the animation
is in progress.
https://bugzilla.gnome.org/show_bug.cgi?id=687660
If that fails (which only ever happens in initial-setup mode, which
has no unlock or login dialog), we don't want to go ahead with
whatever we were doing.
https://bugzilla.gnome.org/show_bug.cgi?id=701848
If we don't remove the animation, we might leave a pending call
to _lockScreenShown() which would confuse our state tracking into
thinking we're active when we're not.
https://bugzilla.gnome.org/show_bug.cgi?id=700901
Using a signal handlers causes us to depend on connection order, but
we need the message tray code to run last, so it can notice that
notifications are destroyed when hiding the boxpointer and skip
the broken animation.
https://bugzilla.gnome.org/show_bug.cgi?id=686855
When we shift workspaces to create a blank one for a window or
application, all of the window actors are shifted down. However, some
of these window actors are transient windows attached to a main window.
When these windows are moved to a different workspace, the main window
is moved along with it. When the main window is moved, these windows
are also moved. This creates a double move of the windows.
This double movement leads to unexpected results where workspaces are
collapsed and windows are in incorrect positions.
This patch prevents movement of these transient windows, only grabbing
the main (ancestor) windows to move to a different workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=705174
Remove the Wi-Fi chooser from the menu and put it in a dialog instead.
This frees up the submenu to simply have three items: an rfkill toggle,
a button to show the dialog, and a button to show network settings.
Ideally, we'd autodetect the "needs network" case by user initiation
and automatically show the dialog if needed, but lower-level plumbing
is neccessary, so the menu item to show the dialog is an acceptable
compromise instead.
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Since the network section of the aggregate menu will be shown in the lock
screen, we need to ensure that users can't tweak with network settings or
anything like that.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Replace NMNetworkMenuItem with NMConnectionItem, based on
NMVPNConnectionItem, and replace NMDevice with NMConnectionSection
and NMConnectionDevice.
Since this rips apart NMDevice, and since wi-fi should not be
connection-based, we'll temporarily remove NMDeviceWireless. We'll
add it back in a later commit, along with the new Wi-Fi dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Instead, just add them after they're constructed. This allows us to
not have to pass the connections to each device, and prevents issues
with having to enumerate the connections in the middle of construction.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
Note that this does have an interesting side effect of not showing
network connectivity status on wired. This is intentional, and error
states will still be shown in the top bar when they happen.
This also means that if you're connected to both wired and wireless,
even though wired is the default route, we'll first notice the wireless
active connection, and we'll show that in the top bar. New NM API that
will help figuring out the active connection of the default device is
being implemented to stop this from happening.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
The code is complicated by requiring overflow, and in order to incrementally
improve the code to match the designs, remove overflow.
In the new design, we'll have a fixed number of menu items, and Wi-Fi
will be done by a separate design, so we can't be too concerned with
the menu not fitting on the screen.
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
According to Dan Williams, if firmware is installed the device
will disappear and reappear, and this is unlikely to change any
time soon. Just make our lives easier by removing the tracking.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
I intended to make a few code cleanups, but I apparently forgot
to hook up _updateAccessPoint. Merge it with _activeApChanged,
which is where the notify::active-access-point signal is actually
hooked up to.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
As we only reload search providers on startup or when the sort order changes,
and given the small number of search providers we'll actually load, I doubt
we'll see any speed decrease.
The simplicity of synchronous code is also much clearer, and fully avoids
all the possible bugs about in-flight requests or similar.
This also prevents issues with multiple search providers showing up at once,
which happen when multiple requests to reload search providers get called
immediately, with the existing in-flight async requests never cancelled.
https://bugzilla.gnome.org/show_bug.cgi?id=700283
When we reload the remote search providers, we currently try to remove
all remote providers, and then re-scan. It turns out that we sometimes
remove the wrong providers from the remote provider list, causing us to
have some providers not correctly unloaded.
https://bugzilla.gnome.org/show_bug.cgi?id=700283
Similar to our ClutterContainer monkey-patching, we can add some
convenience to existing ClutterLayoutManagers:
- hookup_style() to bind layoutManager properties to CSS properties
- child_set() to set child properties
https://bugzilla.gnome.org/show_bug.cgi?id=703905
Jasper removed the ShellGlobal:stage-input-mode property after its
"last" use was removed. Adapt the (hopefully) really last use of the
property to the recent input changes.
https://bugzilla.gnome.org/show_bug.cgi?id=704095
There's quite a bit of duplicated code between the login dialog
and the unlock dialog dealing with the various signals from the
ShellUserVerifier.
This commit moves that duplicated code into the AuthPrompt.
https://bugzilla.gnome.org/show_bug.cgi?id=704707
The point of fading the icon is to make the text displayed over the
icon more legible. In RTL layouts, the text is displayed on the left
of the icon, so fading the right-hand-side of the icon doesn't work
well.
https://bugzilla.gnome.org/show_bug.cgi?id=704583
This is a regression from splitting the slider out that never got fixed.
Restore the previous (useful) behavior by adding a public API to the
slider that lets us pass an event through.
https://bugzilla.gnome.org/show_bug.cgi?id=704368
We've long had the hasWorkspaces property, but it doesn't seem like
it was ever used. Implement it so that we don't have workspaces in
initial-setup mode.
Since it's difficult to make it change at runtime with a decent set
of semantics, and we never expect that to happen, don't bother
implementing it dynamically.
https://bugzilla.gnome.org/show_bug.cgi?id=698593
commit ea02380c15 made the login
screen stop using ModalDialog. It makes sense for the unlock
code to also stop using ModalDialog, too (for similar reasons).
Now that the login screen's auth prompt code has been separated
out, the unlock dialog can use it to get the buttons and spinners
etc, that it was previously getting from ModalDialog.
This commit drops the ModalDialog usage in the unlock dialog, and
makes the unlock dialog use GdmUtil.AuthPrompt instead.
https://bugzilla.gnome.org/show_bug.cgi?id=702308
Right now when a user types their password to unlock their session
we end up getting an unlock signal from GDM right away. We then
proceed to deactivate the screensaver before the user has a chance
to read his messages.
This commit makes sure we clear out the message queue before processing
the deactivation request.
https://bugzilla.gnome.org/show_bug.cgi?id=704347
logind sends out an "unlock" signal separately when
verification completes and we already listen for that,
so we don't need to unlock on verification-complete, too.
https://bugzilla.gnome.org/show_bug.cgi?id=704347
Add an option to limit the appSwitcher to the current workspace. For users
that use workspaces for task separation this more convient then current
behviour. While having to add an option is unfortunate there is no way to make
both groups happy as workspaces usage differes between different users / types
of users.
https://bugzilla.gnome.org/show_bug.cgi?id=703538
We need to make sure that we reset the opened submenu when we close the
submenu, not trick the toplevel into thinking a closed submenu is the
currently opened menu.
https://bugzilla.gnome.org/show_bug.cgi?id=704336
This way, if a parent is insensitive, all children will be, too.
Though PopupSubMenus will be forced closed, PopupMenuSection needs
the propagation.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
Doing it at the end has confusing semantics, especially as there is
this point where isOpen is true, but the corresponding open-state-changed
has not been emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
Use ClutterActor.allocate_align_fill() so we don't have to do
this math ourselves. At the same time, clean up the RTL handling
so that it's easier to follow.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
It seems this behavior at one time was intentional, but I (along with
the designers) think it looks ugly having the menu having its insides
shrinking and shifting around while fading out of existence.
There's two cases where we currently explicitly try to animate the
submenu closed -- when an item is clicked inside the submenu, and
when the toplevel closes. This removes both of those.
The user expectation is that submenus will be closed the next time the
toplevel is open even if they were open before, so force submenus closed
when the toplevel finishes fading out, without any animation.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
As the aggregate menu will be built out of sections from each
of the menus, we need to ensure that activating an item in one
of these sections can close the main menu, even when it is not
a menu item. The new API also needs to be flexible enough to
ensure that animations can be controlled, like the buttons that
lock the screen or launch a new session.
Port the user menu to use this new API as well.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
A PanelMenuButton added to the top bar might not be visible at all
times. If it is hidden while the corresponding menu is open, we
currently don't do anything at all, e.g. the menu remains open
pointing to an arbitrary location in the top bar.
Instead, close the menu automatically in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=703540
The event catcher that covers the entire primary monitor during
transitions is currently inside a BoxLayout, relying in its
odd support for fixed position actors.
We already have a proper stack widget in place, move it there.
https://bugzilla.gnome.org/show_bug.cgi?id=703808
Currently lookingGlass relies on some odd BoxLayout behavior, which
allows children to use fixed positioning without affecting the parent's
size request. As this behavior is scheduled for removal, add the
looking glass dialog directly to Main.uiGroup.
https://bugzilla.gnome.org/show_bug.cgi?id=703808
The duality of the Clutter's key focus and mutter's window focus has long been
a problem for us in lots of case, and caused us to create large and complicated
hacks to get around the issue, including GrabHelper's focus grab model.
Instead of doing this, tie basic focus management into the core of gnome-shell,
instead of requiring complex "application-level" management to get it done
right.
Do this by making sure that only one of an actor or window can be focused at
the same time, and apply the appropriate logic to drop one or the other,
reactively.
Modals are considered a special case, as we grab all keyboard events, but at
the X level, the client window still has focus. Make sure to not do any input
synchronization when we have a modal.
At the same time, remove the FOCUSED input mode, as it's no longer necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
We can easily implement much of the same behavior ourselves by
keeping track of Clutter's focus events. Reintroduce heavily
modified FocusGrabber to do the work for us.
This will temporarily break when the user selects a window until
we can make gnome-shell automatically set the stage focus.
This also removes our only use of focus grabs, so remove those
as well.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
We can't assume "isActive implies isModal", so there is a risk
of pushing a modal that nothing else will ever pop, because we
take the early return and don't activate the user active watch.
https://bugzilla.gnome.org/show_bug.cgi?id=700901
_updateIcon should not attempt to sync any active connections, as the
icon-changed signal can be emitted in response to something done during
_syncActiveConnection. In the case of VPN, removeActiveConnection would
cause an icon-changed signal to be emitted immediately, but the state
would not be updated, causing us to call removeActiveConnection over and
over.
Explicitly sync all active connections when we know it needs to be done,
and simply make _updateIcon synchronize with the current device's icon.
https://bugzilla.gnome.org/show_bug.cgi?id=703565
This fixes a blue background being drawn when switching the monitors
configuration using hardware keys
(clone/multimonitor/external/internal).
The problem is that the shell gather all background loading requests
under the same meta_background_load_file_async call using one
GCancellable (the first one to come). So when the shell receives a
batch of 12 or so XRandr events, it creates 12 new background managers
which end up trying to load 12 times the same background picture. All
of these requests are batched into the same
meta_background_load_file_async using the first GCancellable received
on the first request. Unfortunately, when the first request is
cancelled by the following event indicating a new monitor setup, all
of the background picture requests are dropped on the floor, and
nothing gets loaded (hence the blue screen background).
https://bugzilla.gnome.org/show_bug.cgi?id=703001
It turns out that picking a 3200x1200 scene on notebook chipsets
every time the mouse is moved isn't exactly the fastest thing. Defer
picking to an idle to ensure that it won't get in the way of keeping
up with mouse events.
https://bugzilla.gnome.org/show_bug.cgi?id=703443
The code that checks for various conditions is confusing and
undercommented. It appears one of the recent refactorings
inadvertedly inverted the sense of the 'hidden mountpoint'
check, and caused autorun to not work for anything that does
not have a 'native root' - which is pretty much all volumes
implemented by gvfs.
https://bugzilla.gnome.org/show_bug.cgi?id=703418
Commit d6cace32 introduced a typo in the left/right arrow side
calculation code that causes in most scenarios (where the monitor
width is greater then the height) to not flip the box when it doesn't
fit inside the monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=703403
If the drag action ends after something else has put the screen shield
into a different state we can end up in an inconsistent screen shield
state where the whole thing is empty.
https://bugzilla.gnome.org/show_bug.cgi?id=703126
Commit 16fa186b63 attempted to fix the zoom animation problem
by throwing changes on the floor while the overview is animating. This has
the side effect that we might end up missing some positioning changes causes
windows to overlap the workspace thumbnails.
So revert those changes and fix it by simply by passing
WindowPositionFlags.ANIMATE during the overview animation.
This way the animation works as expected and we don't miss any position changes.
https://bugzilla.gnome.org/show_bug.cgi?id=703105
The top_window_group was introduced for popup windows that should
appear above system chrome, but as the group itself is just a child
of Main.uiGroup, chrome that is added after top_window_group will
still be stacked on top.
At least correct the stacking for actors added via addChrome().
https://bugzilla.gnome.org/show_bug.cgi?id=702338
The class is generally useful, so it only makes sense in panel.js
for historical reasons. Because other parts of the code are
using it, though, problems are cropping up that require a
workaround like:
placeSpinner: function(...) {
/* This is here because of recursive imports */
const Panel = imports.ui.panel;
Panel.AnimatedIcon(spinnerIcon, WORK_SPINNER_ICON_SIZE);
...
}
This commit moves AnimatedIcon to its own file so we can drop that
workaround.
https://bugzilla.gnome.org/show_bug.cgi?id=702818
When the osd window is hidden based on the timeout, it accidentally
left the timeout ID in place. When a subsequent switcher popup came
up, it thought the OSD window was scheduled to be hidden and tried
to re-hide the actor. This caused the tween to be run along with
an extra call to enable_unredirect_for_screen.
When the allocation of the workspacesView changes during the animation we override
the tween with one that does not animate causing the overview zoom animation
not to happen.
Fix that by ignoring the alloactionChanged notification during the overview
animation.
The code here before was trying to play hierarchy tricks to
figure out how to show / hide the events list, which broke
when we rearranged how the date menu was laid out. Simplify
the code here to not be so tricky, and update the CSS to
match the new designs.
https://bugzilla.gnome.org/show_bug.cgi?id=702849
The timestamp timeout specifies how long we should wait before
adding a timestamp to the notification. A timeout of one minute
ended up showing a lot of timestamps, so increase it to 3 minutes.
https://bugzilla.gnome.org/show_bug.cgi?id=687809
If we focus notifications before they're expanded, the body and action
area won't be visible, and the can_focus members like the text entry
will not be able to be focused.
Ensure that all of the all actors that would be in an expanded notification
are visible before we attempt to focus them.
https://bugzilla.gnome.org/show_bug.cgi?id=698778
Migration from old settings can result in a path instead of URI
there. This is technically invalid, but can easily recognize it
and avoid the crash.
Minor changes by Ray Strode
https://bugzilla.gnome.org/show_bug.cgi?id=702121
The status item will go away soon, so make sure the one-time
fire is given its own function. At the same time, only connect
to the signal when the situation actually matters.
https://bugzilla.gnome.org/show_bug.cgi?id=701954
No class in here has this.carrier as a property. Presumably, this was
meant to be this.device.carrier, but since this code is going to be
rewritten soon anyway, might as well just junk the never-working
code for now.
https://bugzilla.gnome.org/show_bug.cgi?id=701954
In order to have event descriptions on multiple lines, but still
maintain proper alignment with the day and time strings, refactor
the whole event list to be one big table. Headers are implemented
as spanning cells, and uneven spacing is a mix of row/column spacing
and cell padding.
https://bugzilla.gnome.org/show_bug.cgi?id=701231
In BlueZ 4, Authorize() was used to authorize both service
and JustWorks authorization requests. In BlueZ 5 these two
have been split into AuthorizeService() for services and
RequestAuthorization for JustWorks devices. Adapt the
Bluetooth code accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=700891
This can be more easily achieved by listening for changes to the
device's active-connection property. VPN will still need support to
track active connections, as it does not have an associated
device. But as VPN can track multiple active connections, the names
"set" and "clear" don't quite fit. Rename them to the more-standard
"add" and "remove".
https://bugzilla.gnome.org/show_bug.cgi?id=701954
The end session dialog was waiting a second before updating
its text to display the timer. It is nicer to show the correct
message from the start.
https://bugzilla.gnome.org/show_bug.cgi?id=702056
We currently monitor the shell's override schema for changes to
the 'dynamic-workspaces' key, which ends up being the wrong
schema in classic mode. With the new ability to use mode-specific
overides, we can finally fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=701717
This will allow the use of mode-specific defaults. For classic mode
we currently implement this with mini-extensions, but this may result
in confusing behavior when settings change due to extensions being
disabled during screen locks (not to mention that those mini-extensions
are hardly an elegant approach).
https://bugzilla.gnome.org/show_bug.cgi?id=701717
We will allow to use mode-specific overrides; in preparation for that,
move the code so that we only override preferences after initializing
the session mode.
https://bugzilla.gnome.org/show_bug.cgi?id=701717
As multiple-connections for a Wi-Fi AP won't fit in the new design,
remove submenus right now. Simply make a simple item that connects
to the first known connection for the AP, which should be the common
case.
https://bugzilla.gnome.org/show_bug.cgi?id=698918
Currently we "only" grab the keyboard when starting a drag operation,
which does not impede keybindings to be processed. This is at best
not harmful (like workspace switching), but may have unintended effects
otherwise - for instance, the hot corner is disabled, so having the
corresponding keyboard shortcut still active is fairly odd (not to
mention that it leaves the system in a confused state).
Fix this by switching to pushModal()/popModal(), which will push a
dedicated keybinding mode for us.
https://bugzilla.gnome.org/show_bug.cgi?id=700877
Currently the clipboard's contents may leak to unauthorized parties by
pasting into the unlock dialog's password entry and unmasking the entry.
Prevent this from happening by clearing the clipboard on lock.
https://bugzilla.gnome.org/show_bug.cgi?id=698922
When the dash does not contain any applications (either favorites
or running), it is currently impossable to add a favorite via DND.
Grow the dash slightly in that case to provide a drop target.
https://bugzilla.gnome.org/show_bug.cgi?id=684618
We currently only keep track of old placeholders when moving past
the dragged app's current favorite position, as this is the only
case where we need to worry about jitter. Still, moving it into
_clearDragPlaceholder() allows us to consolidate code paths, which
is a good thing ...
https://bugzilla.gnome.org/show_bug.cgi?id=684618
The function currently only resets the placeholder position if
there is a placeholder; this is not necessarily true, as the
placeholder may be reset outside _clearDragPlaceholder().
If this happens, the placeholder will temporarily stop working
for the "old" position (and permanently if it's the only position).
Just reset the position unconditionally.
https://bugzilla.gnome.org/show_bug.cgi?id=684618
Before, the text of those buttons were truncated when the text exceeded
the fixed width we had in the CSS.
Now, we give more horizontal space to the control buttons to match
the maximum text length of all buttons.
https://bugzilla.gnome.org/show_bug.cgi?id=696307
Now that we control our own destiny, I noticed that getResultsToDisplay
is the only user of this._notDisplayedResult, and it's called immediately
after setResults, which is the only thing that sets it. Just remove the
stateness entirely.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
Since the provider icon only appears in the list results, it makes
sense for that to be stored with the results class, rather than outside,
triggered by which sort of display it is.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
It turns out that this focus code broke sometime in the 3.6 cycle --
when updating results, the focus is always on the text entry, so this
never gets called. We'll eventually replace it with something that
keeps track of the focused result meta, but for now, remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
While this is a very simple translation right now, soon enough it will
be so that it will have a less crazy "public" API and can do things like
cache result metas.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
Since the two paths that call this want to keep the actor in two different
states, it makes sense to just call the one function that's the same between
both individually.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
Right now, this doesn't give us very much, since IconGrid and StBoxLayout
have different APIs. But since we want to introduce result caching, it
makes to reduce the duplication we already have so we don't need to add
the code to do so in both places.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
pushResults, and the original async search API, were originally intended
so search results that weren't immediate could be added as they come in.
Since then, we've decided that the design of search results is that they
should finish at once with all results. Thus, the code was modified so
that pushResults always overwrote the current result set. As such, it makes
sense to rename the method so that the name matches the behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
Commit d0310bd745 blindly replaced global.overlay_group with
Main.layout.overviewGroup, but unlike the former, the latter is
hidden while the overview is not active, which makes it unsuitable
for the message tray's light box. In fact, with the removal of
global.overlay_group, there is no longer a container which may
be used both inside and outside the overview, so we can either
recreate the lightbox each time we show/hide the overview, or
use different lightboxes altogether; this opts for the latter.
https://bugzilla.gnome.org/show_bug.cgi?id=701097
This is a singleton object inside libibus which means that if we
destroy it (e.g. because ibus-daemon got restarted) then, other
library users, like the ibus gtk+ IM module that we also use
in-process, will break.
https://bugzilla.gnome.org/show_bug.cgi?id=699189
Currently we simply set the gsettings key when activating an input
source. This obviously introduces a time window, between the event that
activates the switch and when the switch is complete, under which key
events are being delivered to applications and interpreted according
to the previous input source.
The patches in bug 696996 introduce a DBus API in g-s-d that allows us
to know when an input source if effectively active. Using that and
freezing keyboard events in the X server until we hear back from g-s-d
we can ensure that events won't be misinterpreted after an input
source switch.
https://bugzilla.gnome.org/show_bug.cgi?id=697007
Passkey is the proper name to be used when we are pairing with a Bluetooth
2.1+ device. PIN are only used for older devices which is not the case
here, the message is only shown when dealing with 2.1+ devices.
https://bugzilla.gnome.org/show_bug.cgi?id=697661
Meta laters are invoked in reverse order of registration, so
having multiple laters propagating the geometry cause all but the
first one in the frame (which is usually wrong) to be ignored.
Instead, queue at most one later call, and use the last set geometry
in the callback.
https://bugzilla.gnome.org/show_bug.cgi?id=700853
In order to make sure that the struts and regions are initialized,
we need to make sure that we do with the conditions that nothing
is transformed, like the uiGroup, and that everything is visible.
These invariants broke during a fix to hide the UI until the
system background texture could be loaded. Now, reorder things so
that the system background is loaded, and then the UI is properly
loaded, and so on.
https://bugzilla.gnome.org/show_bug.cgi?id=696159
While the default style works well will a solid handle, using both
border and fill color would be desirable in classic mode. Add the
necessary (optional) style properties to allow this.
https://bugzilla.gnome.org/show_bug.cgi?id=697917
Instead of using the input mode, when the overview is not modal
it should use a Chrome-tracked actor, that is added to the input
region. Because the overview always takes pointer input when
visible, the actor is added at startup, and it is shown and hidden
as needed.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
If we are passed an invalid file template, ShellRecorder.record()
will return a %NULL filename; as the Screencast DBus interface
expects a string return value, we cannot return the value unmodified
in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=700842
Variable names like "sourceNotificationStackDoneShowing" are too
long, and too undescriptive: this one points to a source, not a
notification stack that has been done showing.
As the close button of folder popups overlaps at the top, it ends
up being cut off if the folder is located at the very top of the
view. Fix this glitch by taking the button's overlap into account
in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=694371
We already take care of growing the view if open folders overlap
at the bottom, however folder popups may still end up being cut
off when opening above the source icon - if the popup is high enough,
its y coordinate will be negative and therefore outside the parent's
allocation. To fix, we can either make sure that folders pop up below
their source icon in that case, or adjust the parent grid's position
as necessary while a folder is open. This implements the latter.
https://bugzilla.gnome.org/show_bug.cgi?id=694371
If the view doesn't fill the available space, content should still
start at the top rather than the center - not least the positioning
code for folder popups assumes that, so set the appropriate expand
flags.
https://bugzilla.gnome.org/show_bug.cgi?id=694371
The main overview actor was made reactive to catch scroll-events
and propagate them; after some code shuffling, the actor that
catches scroll events ended up not being the same actor that's
supposed to propagate this, which broke using the scroll wheel
to switch workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=700595
Currently we show the workspace popup for relative targets ("up", "down"),
but not when targetting a specific workspace directly.
There is not really a good reason for that difference, and as we are about
to introduce a new shortcut to target the last workspace (which does vary
with dynamic workspaces), it makes sense to unify the behavior and always
show the switcher.
https://bugzilla.gnome.org/show_bug.cgi?id=659288
Currently we stop monitoring application usage when disabling the
'enable-app-monitoring' setting, but we still expose previously
gathered data in the app picker's frequent view. This is not what
users should expect, so hide the view in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=699714
Some keyboard spot a dedicated search key, which gnome-settings-daemon
currently handles by spawning gnome-search-tool. It makes a lot of
sense to promote the Shell's integrated search feature instead, so
expose an appropriate DBus method g-s-d can use.
https://bugzilla.gnome.org/show_bug.cgi?id=700536
This is technically a smidge slower due to the constant bisect insert,
but since this should only happen when we make a Wi-Fi dialog, it's
insignificant.
https://bugzilla.gnome.org/show_bug.cgi?id=700322
Commit 2499f2ed80 went back to using shell_app_activate() for
selecting an app, which favors windows on the current workspace;
this is the behavior we want for instance when activating a
launcher, but it's wrong for the alt-tab list - explicitly
request the first (e.g. MRU) window in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=700356
Since commit c84dc6254d, popup menus are closed automatically
when another menu opens (to catch the case where a menu is opened
by keyboard shortcut, which wasn't handled before). However in the
case of child menus, both child and parent are expected to be visible,
so handle this case explicitly.
https://bugzilla.gnome.org/show_bug.cgi?id=699678
Wrap new GtkMenuTracker API that adds an easy way to bind to
tracker items, and use it to add back support for submenus.
This also adds support for a submenu feature that we didn't
have support for before, action namespaces.
https://bugzilla.gnome.org/show_bug.cgi?id=700257
This pulls in new upstream API that Ryan will maintain, removing
code on our side.
Currently, our implementation of submenus will be gone, but this
will be fixed in a few commits.
https://bugzilla.gnome.org/show_bug.cgi?id=700257
When opening an application folder, it should take key focus to
allow for keynav; also, Escape closing both folder and app picker
is unexpected, it should only close the popup.
https://bugzilla.gnome.org/show_bug.cgi?id=695314
The point of a hash table is that you don't need to list all the
elements. To avoid that, keep a "clearableCount" in MessageTray,
which can be used by the message tray menu to show and hide the
clear item, and that is updated in constant time when sources
are added or removed.
https://bugzilla.gnome.org/show_bug.cgi?id=700194
Upon popMode, MessageTray will try readding all notifications
to their rightful parent, so we must tell NotificationBox to
relinquish them before st_bin_set_child() fails (leaving a dangling
child pointer and crashing at the next allocation)
https://bugzilla.gnome.org/show_bug.cgi?id=698812
Like screenshots, the screen recorder can be a useful tool in other cases
than being triggered by a keyboard shortcut. To account for that, export
a Screencast DBus API similar to the existing Screenshot interface.
https://bugzilla.gnome.org/show_bug.cgi?id=696247
Our built-in screen recorder is implemented as a component, so it will
just be disabled when the session mode doesn't allow screencasting.
However we will expose screencasting functionality on DBus as well, and
while it makes sense to restrict its availablity to the same modes as
the existing recorder, exporting/unexporting the service depending on
the session mode is not very consumer friendly.
For that reason, add an additional 'allowScreencast' property that for now
mirrors the availability of the 'recorder' component.
https://bugzilla.gnome.org/show_bug.cgi?id=696247
There is not always a clear distinction between code and style,
which is why the interface ends up being mostly unusable when we
end up without *any* style, for instance because the specified
application-stylesheet is corrupt.
Setting the default stylesheet in addition to the application-stylesheet
is no guarantee for non-default themes not messing up the interface, but
it should at least lower the risk ...
https://bugzilla.gnome.org/show_bug.cgi?id=700097
Metacity's Ctrl+Alt+Tab would include X11 windows
with hints like GDK_WINDOW_TYPE_HINT_DOCK and
GDK_WINDOW_TYPE_HINT_DESKTOP (there are more conditions, but that's a
good start). If we're in normal mode, those are visible and it's OK
to display those in the Ctrl+Alt+Tab order, but if we're in the lock
screen or the unlock dialog, they're not visible and it doesn't make
sense to focus them.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=699862
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Florian Müllner <fmuellner@gnome.org>
Some callers of the keyring prompt keep the dialog up while
processing the prompt. Allow the user to cancel the prompt
while in this state.
This is propagated to the caller, who can cancel the operation
in question when this occurs.
https://bugzilla.gnome.org/show_bug.cgi?id=682830
Only ACTIVE or ACTIVATING connections are important when deciding
what icon to show, don't fallback on any, possibly invalid or deactivating,
active connection object.
https://bugzilla.gnome.org/show_bug.cgi?id=676285
Commit e98eb57e3e added flags to expand the dialog's background
stack, which works fine with the current clutter-1.16 branch, but
breaks on clutter-1.14 (as shipped with GNOME 3.8).
Using an St.Widget with a Clutter.BinLayout fixes this, and is more
modern Clutter usage.
https://bugzilla.gnome.org/show_bug.cgi?id=699877
The popup currently has a fixed size based on monitor size. As a result,
the popup's content may overflow if its minimum size is larger than the
popup size. To prevent this, use min-width/min-height for the popup size
so that the popup can grow if necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=696523
Currently a system modal dialog's actor hierarchy depends on whether
events should be blocked while the dialog is shown or not. Change
it to always contain a stack, to allow subclasses to add additional
background elements.
https://bugzilla.gnome.org/show_bug.cgi?id=694912
The date actors get destroyed and recreated on every date change which drops
key focus for the selected date. Restore key focus in such a case, but only
when the selected date was actually clicked. Whenever the next/prev month
buttons code is used (for scrolling, mouse click, or keyboard click), have
the corresponding button grab focus. Changing months currently causes the
calendar to update twice as the eventSource gets changed, so key focus gets
lost if it is on a date when the month changes.
https://bugzilla.gnome.org/show_bug.cgi?id=667434
The nautilus icon sticks out pretty badly among the symbolic
icons we use for other desktop components. This commit finds
windows of type DESKTOP, and uses the video-display-symbolic
icon for them.
https://bugzilla.gnome.org/show_bug.cgi?id=697914
Since we now have global.screen::in-fullscreen-changed, remove the
duplicate signal. To prevent ordering problems in connecting to
this signal, make inFullscreen a property-function of a new Monitor
object rather than a data property we tack on to a Rectangle object.
https://bugzilla.gnome.org/show_bug.cgi?id=649748
If we created a workspace after showing the view, we would never
set the geometry on it, which would cause an exception in the
window layout code and leave the DND state tracking in an undefined
state.
https://bugzilla.gnome.org/show_bug.cgi?id=699029
We put these "access point objects" in "this._networks" and
"this._activeNetwork", so let's rename it. This also makes
the fact that each "access point object" can contain multiple
access points a tiny bit less confusing.
https://bugzilla.gnome.org/show_bug.cgi?id=698918
NM is now a lot smarter about dealing with automatic connections, so just
create an empty connection and pass it to it. The only places where NM
requires connection settings is where we require explicit setup: Bluetooth
DUN, WPA-Enterprise and WWAN/VPN. These cases are already handled by
gnome-control-center, where complex configuration is handled, so remove
the automatic connection management for now and just let NM handle it.
https://bugzilla.gnome.org/show_bug.cgi?id=698918
We already do this when navigating between menus via mouse or
keynav, but miss cases where a menu is opened by other means,
for instance via a keyboard shortcut.
https://bugzilla.gnome.org/show_bug.cgi?id=686756
It makes sense to allow closing the app menu with the same shortcut
that is used to open it, so make it a toggle action and allow it
TOPBAR_POPUP mode.
https://bugzilla.gnome.org/show_bug.cgi?id=686756
Currently all keybindings are disabled while some popup menu is open.
However some keybindings may still be useful in some cases, so expose
GrabHelper's modal params parameter to allow specifying a keybinding
mode for particular menus.
https://bugzilla.gnome.org/show_bug.cgi?id=698938
Eval() is expected to return a boolean success value and a string result.
However when the function is disabled (via the development-tools setting),
we return null for the latter which is not a valid string value.
Return an empty string instead.
https://bugzilla.gnome.org/show_bug.cgi?id=698959
Since [1], GIO supports generic serialization and deserialization of a
GIcon into a GVariant. This is also implemented by GdkPixbuf and could be
used instead of our homegrown code for it.
This commit adds support to another 'icon' key in the metas dictionary
returned by applications for it. The previous 'gicon' and 'icon-data'
keys are still parsed and supported as before, but are now deprecated.
[1]
https://git.gnome.org/browse/glib/commit/?id=c16f914b40c749b938490a4e10a3c54ec1855c42https://bugzilla.gnome.org/show_bug.cgi?id=698761
StLabel doesn't like that we set its properties after destructions,
and this would happen in currentInputSourceChanged() at the end,
when setting the ornament.
As the context menu and notification boxpointer can only appear if we already
take a modal grab, grabFocus will have problematic results if the focus does
somehow change.
https://bugzilla.gnome.org/show_bug.cgi?id=698483
This simplifies the code required to build remote menus and
put all the items in the right place, and makes us share our
implementation with GTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=698427
This makes it easy to replace the dot with another label in the future.
Change the allocation logic, as text layout is more complicated than
simple icon logic.
https://bugzilla.gnome.org/show_bug.cgi?id=698427
If windows are removed or added, we shouldn't keep the old layout, as it's
not valid anymore. If windows are removed, this is especially bad, as the
rows contain references to the removed window objects, causing crashes.
https://bugzilla.gnome.org/show_bug.cgi?id=698622
Instead of applying an additional scale factor to all the rows in the
layout, only do it for those rows that don't fit.
This avoids the visual distraction of resizing a row when there's no
need to.
Instead of doing an entire recalculation of window positions when
sliding the thumbnails box, simply recalculate the position and scale
with basic aspect ratio math. This also ensures that windows won't
miraculously swap positions, even if we reposition windows while the
thumbnails box is expanded.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
Split out the part that moves the window clones around from
the part that calculates the window clone positions, and rename
both methods so that the overall meaning is more clear.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
Repositioning will eventually be separated from recalculation
to accomodate two different geometries, so we'll need to do
the padding and area manipulation in two different areas.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
As we want to eventually track two geometries, we need to rename
our very plain "_x, _y, _width, _height". While we could just prefix
them, I think that stuffing them in an object makes more sense.
At the same time, make the variable and method name more descriptive
by adding such a prefix, as well as a bit of documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
To ensure that we don't recalculate window layouts when zooming
in or out, we need to always pass the full geometry. This will
break window repositioning when we zoom back in; for the purposes
of commit clarity, this breaks this feature for now. It will be
added back soon.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
Filter out all applications which have the NoDisplay, Hidden or
Not/OnlyShowIn bits, as those are not meant to be launched directly.
This also allows the user to filter apps from the frequent view
using alacarte.
https://bugzilla.gnome.org/show_bug.cgi?id=696949
If for some reason an extension needs to destroy the AppMenu object,
currently it is not possible to do this cleanly due to these signals
remaining connected.
https://bugzilla.gnome.org/show_bug.cgi?id=698531
This was saved so that doing something which called relayout
but only changed the area rectangle would simply be needed to
recompute window scaling parameters. With the new overview
relayout, the flow control changed, it turns out that the
current layout is always cleared. Remove this for now, and we'll
put in a different strategy for this.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
Instead of creating a bunch of random actors and then passing
them off to the controls manager, let the controls manager
construct them. This leaves the controls manager in charge
of the ordeal.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
Putting the notification actor in the tray actor has caused a lot
of various bugs and glitches over the years related to syncing the
two, fizzling out events, and so on. It's a much simpler model if
we consider the notification actor and tray to be separate widgets.
As a side effect, this makes the context menu not pop up when we
right-click on notifications.
https://bugzilla.gnome.org/show_bug.cgi?id=695800
This does nothing while the tray is active, so it doesn't make sense
to track it on the tray. This also makes the code a lot easier to read,
with notification behavior being labeled "notification" rather than
"tray".
https://bugzilla.gnome.org/show_bug.cgi?id=695800
With sticky keys, users should be able to press and release a
modifier and then press a key to activate a modifier-key combination.
Activating the overview on the Super key release keeps these
users from using keyboard shortcuts involving the Super modifier.
The solution implemented here is to simply disable the Super-release
binding if sticky keys are enabled. It is still possible to go
to the overview by using Super-S or Alt-F1.
https://bugzilla.gnome.org/show_bug.cgi?id=685974
This is a new, regular keybinding for going to the overview.
The default binding is Super-S, which goes well with Super-A
for going to the application grid.
This is separate from the existing panel-main-menu keybinding,
so that we can keep Alt-F1 opening the main menu in classic mode.
https://bugzilla.gnome.org/show_bug.cgi?id=698251
In order to use a different spinner image in classic mode (or any
other mode specific style), get it from CSS rather than hardcoding
a particular image.
https://bugzilla.gnome.org/show_bug.cgi?id=693688
For classic mode, we want to use a different styling for the spinner,
so we will pick up the image filename from CSS to make use of mode
specific styling. As the CSS will give us a full pathname, adapt the
API to take a full pathname instead of building it inside AnimatedIcon
from the passed basename.
https://bugzilla.gnome.org/show_bug.cgi?id=693688
GrabHelper already takes care of putting the key focus back on the
widget that had it when the grab was established.
ShellEntry's close() has recently become harmful since it's now called
from the menu's destroy() method and that is called in the entry's
destroy handler which means that this._entry might no longer be valid
at close() time.
https://bugzilla.gnome.org/show_bug.cgi?id=697560
The actor is the same as the drag actor in this case, but we tend to
set properties on the drag actor and get them from the actor elsewhere
in this codepath. Make this consistent.
https://bugzilla.gnome.org/show_bug.cgi?id=697504
It turns out that we never destroyed modal dialogs when closing
them, causing them to still linger in the scene graph even when
there were no references to them in the JS. The one case where
we don't want to destroy modal dialogs after being closed is
endSessionDialog, so provide a parameter that allows classes
to override this behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=697295
We chain up on _finish() to drop the grab and destroy the switcher
popup but we should activate the target window first because dropping
the grab results in the previously focused windows getting a focus in
event immediately followed by the focus out event from the target
window activation which we can easily avoid.
https://bugzilla.gnome.org/show_bug.cgi?id=696259
This ensures that when we have windows that are already visible,
like desktop icons, they don't fly across the screen from what
seems to be hyperspace to get into view.
https://bugzilla.gnome.org/show_bug.cgi?id=696323
if a slideshow file has a really large duration we'll currently
throw an exception.
This bug is aggravated by the fact that some versions of
gnome-desktop use UINT_MAX as a sentinel value to mean,
"don't ever update slide".
This commit treats durations that would overflow as infinitely
long.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
If a background gets requested from the cache while it's still
being loaded from an earlier call, then there will be two concurrent
loads of the same file.
That concurrency is mitigates the effectiveness of the cache and
also causes leaks.
This commit consolidates file loads so that concurrency doesn't
happen.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
Right now we only destroy the bgManager object when the
workspaceThumbnail is explicitly destroy with its destroy()
method.
This commit makes sure bgManager gets destroyed when the
workspaceThumbnail actor is destroyed without calling
destroy().
https://bugzilla.gnome.org/show_bug.cgi?id=696157
BackgroundManager connects to the changed signal in
the backgrounds it manages.
The signal ids for the changed signal connectionss are stored
as state on the background manager object.
If the background being managed changes while the manager
is still loading the old background, then the signal id
variable can get out of sync with the background object being
managed.
This commit ties the signal id to the background objects themselves,
so there is no opportunity for them to desynchronize.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
Normally backgrounds get evicted from the cache when their actor is
destroyed. If the actor changes content without destroying itself,
though, we should evict the old content from the cache, too.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
We currently only add the first instance of a background
to the cache. This means if the actor associated with that
background is destroyed, the content will be evicted and
it will need to get reloaded, even if it's already loaded
on another actor.
This commit ensures every content gets added to the cache.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
In the (no barriers) fallback case handleDragOver has somehow
ended up being turned into a nop and thus breaking xdnd
overview opening.
Fix that by calling _toggleOverview() when a xdnd source triggers
it.
https://bugzilla.gnome.org/show_bug.cgi?id=696447
When commit 724a2bd7 changed the way to determine the default
calendar app, it dropped all special handling of evolution.
Unfortunately we still need it to not end up with the default
mail component, so add it back.
https://bugzilla.gnome.org/show_bug.cgi?id=696432
Currently, if a button-press event results in releasing the last modal
grab (e.g. clicks outside the grabbed actors), we don't consider the
event handled and allow its emission to continue. If we consider
dismissing a grab as an action of its own, any additional action
triggered by the same event becomes an unexpected side effect.
Tweak the capture handler accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=696422
There is no reason why there shouldn't be a battery icon in initial-setup,
knowing how much battery you have left is useful in during setup as well.
This also fixes an exception in the lock screen caused by the combined icon
not finding the battery one.
https://bugzilla.gnome.org/show_bug.cgi?id=696212
There's large performance issues with both the blur and desaturation
that make the screen shield hard to use on slower computers, and this
has always been a temporary stopgap until the user can pick a different
image for the lock screen.
https://bugzilla.gnome.org/show_bug.cgi?id=696322
Right now, if multiple messages come in, they just sort of
clobber each other.
This commit sets up a message queue, and introduces pauses
long enough for the user to hopefully be able to read those
messages.
https://bugzilla.gnome.org/show_bug.cgi?id=694688
GDM sends a reset signal after verification succeeds
so that a user-switched login screen can prepare for
the next time it's going to be used.
The unlock screen treats resets as failures, though.
This means, on success, we're emitting "failed" and
clearing any last second messages.
This commit changes the unlock code to ignore resets from
GDM after successful verification.
https://bugzilla.gnome.org/show_bug.cgi?id=694688
Right, the common code between the login screen and
the unlock screen handles clearing the user verifier
when GDM sends a reset.
We don't actually always want to clear the messages on
reset in the unlock case, though, so doing it implicitly
is problematic.
This commit moves the clear() call from the common code
to the specific reset handlers.
https://bugzilla.gnome.org/show_bug.cgi?id=694688
Since we drop our event handler, we won't see ever the release event
from the button press, so unset the flag so it doesn't muck with the
next time somebody takes a grab.
https://bugzilla.gnome.org/show_bug.cgi?id=696102
Getting fullscreen window tracking right in GNOME Shell turned out to
be very hard, because it depended on details both how Mutter handled
fullscreen windows and the exact timing of that. Fullscreen tracking
and auto-minimization of fullscreen windows that lose their fullscreen
status has thus been implemented in Mutter: use that.
https://bugzilla.gnome.org/show_bug.cgi?id=649748
Previously when a client requests that a window should be docked the
shell would reparent the socket window onto the stage's window and
then use ClutterX11TexturePixmap to get a texture to represent the
window. This will not work if Clutter is no longer using the X11
winsys for example if it becomes its own display server. Instead this
patch leaves the socket window as a child of the root window and lets
mutter create a MetaWindow out of it. If Mutter is acting as a display
server then this mechanism will still work via the headless x server.
The ShellGtkEmbed instance now registers for notification of the
‘window-created’ signal of the display so that it can find the
MetaWindow that gets created to represent the socket window. When this
window is found it is prevented from being displayed on the screen by
setting the actor's opacity to 0. An input shape is then set on the
window to prevent it receiving any input.
Instead of being a subclass of ClutterX11TexturePixmap, ShellGtkEmbed
is now a subclass of ClutterClone. When the MetaWindow is found for
the socket window the clone's source is set to the invisible actor for
the window so it can be displayed in the panel as before.
The ShellEmbeddedWindow no longer needs to know what the stage is
because it no longer reparents the socket window. Therefore the
ShellTrayManager doesn't need to know the stage either so
shell_tray_manager_manage_stage has been replaced with just
shell_tray_manager_manage_screen.
https://bugzilla.gnome.org/show_bug.cgi?id=693438
To create a new workspace by dropping on the placeholder, we move all
the windows down one workspace and then wait for _checkWorkspaces() to
automatically create the empty one at the end.
This means that, from the implementation POV, the new workspace is not
the one created by DND but it's the last one, and this detail was exposed
in the UI because the animation was applied on that one.
Fix that by starting the animation manually from the DND code, and then
blocking the animation from happening when the new workspace is created
with a flag.
https://bugzilla.gnome.org/show_bug.cgi?id=685285
DND of windows has a lot of side effects, including the possibility of
current workspace disappering from under our feet. We need to account
for that when trying to activate it.
https://bugzilla.gnome.org/show_bug.cgi?id=685285
This happens in the case of Workspace/WorkspaceThumbnail: they call
meta_window_change_workspace_by_index(), which fires window-removed
on the old workspace, thus destroying the window clone.
https://bugzilla.gnome.org/show_bug.cgi?id=685285
Windows can be restacked at any time, including when the stackAbove
property of the window clone is being dragged, and thus parented to
the uiGroup. To do stacking properly, we need to skip it for the duration
of the drag, and sync it again at the end (which is already done by
mutter because of the workspace change)
https://bugzilla.gnome.org/show_bug.cgi?id=685285
ClutterBinLayout uses the maximum width/height of all children in
size requests and positions children according to the expand/align
properties. This means that the vertical position of folder popups
is not considered in size requests, so if the main view is smaller
than a folder popup's height and offset, the popup will be truncated
and/or mispositioned. Fix those cases by using a custom LayoutManager
that behaves like ClutterFixedLayout for height requests and like
ClutterBinLayout otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=694371
We need to look at the duration of the current step of the slideshow
to determine when to next queue an event, rather than the full slideshow
duration.
https://bugzilla.gnome.org/show_bug.cgi?id=695882
Due to weird and strange JS scoping semantics, if we are in a
callback, "i" won't be captured and when the callback is called,
we'll have the wrong index, causing addImage to be called instead
of updateImage.
https://bugzilla.gnome.org/show_bug.cgi?id=695882
The pattern is underneath, so we need to add one. It turns out
that ClutterGroup doesn't care about that, but we need to do this
to remove deprecations in mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=695882
To make sure that the screen shield is shown before suspending, we
take a logind inhibitor and release it when the screen shield is
shown. As the screen shield is not only shown on suspend, we can end
up releasing the inhibitor independently from suspending (lock, idle),
in which case the screen might not be locked when we do suspend.
To fix, only release the inhibitor after showing the screen shield
when we are about to suspend.
https://bugzilla.gnome.org/show_bug.cgi?id=693708
Since commit 7cdb75e7ce, initializing UI is deferred until the session
mode has been loaded. However DBus is still initialized immediately,
which means that for DBus methods that access properties in Main, there
is now a window between the method being exposed on the bus and the
method being ready to be called. At least g-s-d grabbing global keybindings
is likely to fall in this window on session startup, and almost guaranteed
when regrabbing bindings after a shell restart.
To fix, defer initializing DBus as well.
https://bugzilla.gnome.org/show_bug.cgi?id=694321
When we switch into an invalid input source we hide the panel
indicator and return early but we were not hiding the previously
active source label and its menu item dot and thus when switching
again to a third input source we would end up showing 2 overlapping
labels in the panel and the menu would have 2 entries with a dot.
https://bugzilla.gnome.org/show_bug.cgi?id=695841
It's possible in some corner cases for the status of the topwindow
to change and make it not fullscreen without ::restacked being
changed. One way that it could happen with the old code was if the
layer of the top window changed from NORMAL to FULLSCREEN.
Change the logic not to look at the layer, which is a function of
Mutter's *intended* stacking, rather than the *actual* stacking,
which is what ::restacked gives you. Instead, look at the top
portion of the stack, down to the first non-override-redirect
window, and see if their are any monitor-sized windows there.
Connect to changes on the top portion of the stack, so we know
if conditions change.
https://bugzilla.gnome.org/show_bug.cgi?id=649748
We always add external DOCK windows to the ctrl-alt-tab switcher,
e.g. separate dock applications or nautilus' desktop windows.
Since commit 1f46a0dc26, all items in the switcher are expected
to set a proxy parameter, but the aforementioned code was not
updated accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=695395
* Prompters have state, and cancelling an already prompter will
cause prompts that are in progress to fail.
* In addition allow replacement of our shell prompter for debugging
purposes.
https://bugzilla.gnome.org/show_bug.cgi?id=695485
notify::* doesn't guarantee that the value has changed, only that it
may have been. We need to ensure that we track the old value to make sure
we don't do things like overwrite timeouts if they already exist.
https://bugzilla.gnome.org/show_bug.cgi?id=695659
Now that the tray is modal, the summary is tied to the tray,
and we don't need to have separate states for the tray and
summary. This also removes the nearly invisible opacity tween
on the summary items when opening the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=695659
The only way that locking happens is with when the summary box
pointer is active. As it can only happen if the summary state
is active, it's impossible for a notification to be expired,
or the summary to be hidden while it's showing.
https://bugzilla.gnome.org/show_bug.cgi?id=695659
It makes more sense to use the monitor the tray is on, rather than the
primary monitor. This also matches us with whether we can open the tray
from a barrier/dwell or not.
https://bugzilla.gnome.org/show_bug.cgi?id=695659
We may release the focus grab at any time, so it's not guaranteed
we'll be in event processing. In particular, hovering over and out
of a notification will cause this to happen, as the notification
is hidden on a timeout.
https://bugzilla.gnome.org/show_bug.cgi?id=695659
For the same reasons that we disable the tray barrier, we should
disable hot corners as well -- when users have a full-screen game
open, we shouldn't allow overview activation by the hotcorner.
https://bugzilla.gnome.org/show_bug.cgi?id=694997
gnome-panel is going away in 3.8, so we can't rely on it to provide our
friendly and reliable companion. But no regret, because we can ship it
ourselves, and at the same time remove some unnecessary configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=695526
Launching the run dialog to open the looking glass or something
like that shouldn't install a bunch of file monitors that monitor
every IO change to the home and system directories.
Instead, simply scan all the paths when trying to complete.
https://bugzilla.gnome.org/show_bug.cgi?id=695338
With fallback mode gone, we can no longer rely on gnome-screensaver
being installed. Rather than handling three different cases (GDM,
gnome-screensaver, no lock), disable the lock functionality when
not running under GDM.
https://bugzilla.gnome.org/show_bug.cgi?id=693403
With fallback mode dropped, we can no longer rely on gnome-screensaver
to be installed, so we'll have cases where we are unable to lock the
screen. The user menu should not show the "Lock" item in this case,
but as UnlockDialog includes UserMenu, we cannot use the existing check
without creating a circular dependency; move the function to a more
generic place to fix.
https://bugzilla.gnome.org/show_bug.cgi?id=693403
We currently resync the stacking order of the two key frames
every iteration of the animation. This is costly and unnecessary.
This commit ensures they're stacked properly up front and doesn't
touch them after that.
https://bugzilla.gnome.org/show_bug.cgi?id=694993
Rather than expose a dizzying array of methods related to managing
state that require infecting every user of the overview methods, try
to do the sensible and smart thing internally. Now, the overview
itself tracks when XDND drags start, and simply calling show, hide or
toggle while an XDnD drag is in effect will show the overview, and
will only take the grab until after the XDND drag ends.
https://bugzilla.gnome.org/show_bug.cgi?id=663661
We currently call the session updated handler as soon as
the session modes are read. This handler sets up keybindings
for leaving the overview (if a user session) and shows the
login dialog (if a gdm session).
We can't do the latter until the stage is mapped because it
takes a grab, and we don't need to do the former until the
user goes into the overview.
This commit defers processing session updates until the
the layout manager says start up is prepared.
It fixes a race condition at login screen startup now that
we don't show the stage right away.
https://bugzilla.gnome.org/show_bug.cgi?id=694321
This cleans up the code considerably, and makes it so that
one path creates all hot corners for all monitors. Why this
wasn't done originally, I have no clue...
The one complication is debouncing if the button and hot corner
are triggered in rapid succession, so we just move this tracking
to the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=663661
For the HotCorner, we want to have different logic for tossing out
specific events based on the grabbed state, etc. so make us have
to pass in an event filter callback.
For the hot corner case, we want to have the pressure apply both in
and outside of the overview, so we need to move this to the user. At
the same time, use keybinding mode math that's more like what's used
in filterKeybinding.
While it may seem like an abuse of the KeyBindingMode API, it may
become more reasonable if one thinks of the pressure barrier as a
binding of sorts, just applied to the mouse. If a ButtonBinding API
was added to mutter, I think we'd use the existing KeyBindingMode
infastructure there as well.
Ensure that the pointer leaves the barrier before we trigger again.
For the message tray case, this doesn't matter much, as the trigger
won't have any effect after the grab is taken, but in the overview
HotCorner case, this ensures that we don't trigger the overview
transition many times simply by holding pressure against the hot
corner, which is easy to do accidentally.
Instead of sometimes having an event source and sometimes not, use
the empty event source when the session mode says the calendar is
disabled. This way, the code can assume an event source object and
avoid checks.
https://bugzilla.gnome.org/show_bug.cgi?id=641383
Check if the event source is currently doing an async call, and prevent
UI updates in that case. This avoids a flash of "No updates" when switching
months.
https://bugzilla.gnome.org/show_bug.cgi?id=641383
SwitcherPopup relies on being able to pushModal(), setting the stage
input mode to FULLSCREEN, and then doing regular event processing on
the actor it adds to uiGroup. But MessageTray uses GrabHelper which
sets up a 'captured-event' handler on the stage and thus gets all
events itself.
This, of course, breaks the switcher if it's brought up in the message
tray so, for now, we'll just prevent it from being used there.
https://bugzilla.gnome.org/show_bug.cgi?id=693907
