On X11, reactive chrome must be added to the input region in order
to work as expected. However that region works independently from
any window stacking, with the result that the unresponsive-app dialog
currently blocks all input in the "covered" area, even in windows
stacked above the unresponsive window.
The correct fix would be to track the unobscured parts of the dialog
and set the input region from that, but that's quite cumbersome. So
instead, only track chrome when the corresponding window is focused
(or the dialog itself of course).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/273
The close dialog for non-responding windows is closed automatically
when we detect that the window is responding again. However as we
currently only ping the window in response to certain user actions
(like focusing the window or opening the window menu), this can
easily go undetected.
Address this by periodically pinging the window while the close
dialog is shown.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/298
The dialog won't be visible when unredirection is in place (for example
while a fullscreen window is focused), so disable unredirection while
the dialog is up.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/298
Since commit 551e827841, we don't always pass a callback parameter.
However passing it on as undefined to ibus doesn't work, as gjs doesn't
accept that as a valid callback value and throw an error. As a result,
we can end up with no layout selected in the keyboard menu and an "empty"
indicator. Fix this by explicitly passing null if no callback has been
provided.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/293
(cherry picked from commit 74bb9e6249)
When gnome-shell receives the signal of 'set-content-type' from ibus,
gnome-shell calls KeyboardManager.holdKeyboard() and
KeyboardManager.releaseKeyboard() and the functions change the current
input focus in GNOME Xorg and it could result in closing a popup window
which has a password entry by focusing on the entry.
The solution is to stop to call the APIs on 'set-content-type' signal.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/391
(cherry picked from commit 551e827841)
The intention of commit 4dc20398 was to disable unredirection while
banners are shown, but the ::done-displaying signal currently used for
re-enabling unredirection is only emitted under some circumstances, so
it's possible that unredirection is left disabled indefinitely, whoops.
Fix this by tying disabling unredirection explicitly to the lifetime
of the banner actor.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/799
(cherry picked from commit e5ce3d541e)
We don't usually show notification banners while the monitor is in
fullscreen, but when we do - the notification is urgent - we should
actually show the banner, even if the top-most window is unredirected.
To achieve that, disable unredirection while the banner is showing.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/430
(cherry picked from commit 4dc2039859)
This attribute was previously only assigned in show(). hide() compares
this attribute to 0. If hide() is called before show() is first called,
the comparison would give the correct result (undefined > 0 is false)
but log a warning:
JS WARNING: [resource:///org/gnome/shell/ui/workspacesView.js 529]:
reference to undefined property "_restackedNotifyId"
Initialize this attribute in _init(), alongside _scrollEventId and
_keyPressEventId which are also used in hide().
(cherry picked from commit b2fabd9356)
dialogContent is set to one of the elements of the list DialogContent,
but not all of those have a checkBoxText property. When logging out (as
opposed to shutting down), this causes a warning:
JS WARNING: [resource:///org/gnome/shell/ui/endSessionDialog.js
763]: reference to undefined property "checkBoxText"
(The line number corresponds to this line in 3.28.3.)
The warning is apparently not triggered if the undefined property is
used as part of a boolean expression:
gjs> var x = {};
gjs> x.a;
typein:2:1 strict warning: reference to undefined property "a"
gjs> if (x.b) { log('oh no'); }
gjs> x.c || ''
""
_setCheckBoxLabel() just checks the truthiness of its 'text' argument,
and the empty string is false-y, so passing '' rather than undefined has
no functional effect.
(cherry picked from commit 0892b5dcdb)
We currently only ignore minimized windows, not windows that are
hidden for other reasons - namely on wayland windows are initially
hidden until they are placed.
This fixes a flicker in the transparent top bar on wayland when the
"position" of an unplaced window wrongly suggests the window is
overlapping the top bar.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/693
(cherry-picked from commit a0dc8dc7ef)
While this sounds counter-intuitive, the image-path hint value might also
be used with URIs or icon names.
As per freedesktop standard:
The "app_icon" parameter and "image-path" hint should be either an URI
(file:// is the only URI schema supported right now) or a name in a
freedesktop.org-compliant icon theme (not a GTK+ stock ID).
Thus the image-path hint should also be parsed as it happens for the
app_icon.
Reuse same logic, by falling back on _iconForNotificationData with the
hint value.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/285
(cherry picked from commit 33b8537bf5)
Destroy the DashItemContainer's child from the same handler as the tooltip. This
will prevent invalid reads when the item is destroyed while its quicklist is
still open.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/781
(cherry picked from commit ff2fbf5ae4)
The picked target actor may be destroyed (e.g. hover style change
resulting in the ClutterTexture to be destroyed). If we don't handle
this, GJS will abort when it sees the exception caused by Javascript
code trying to access the destroyed target actor.
To handle it, listen on the 'destroy' signal on the target actor, and
repick, so a valid actor is passed to the next motion callback.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/632
(cherry picked from commit 4259676f6e)
The `reactive` property of icon actors was being restored 24 times over
the course of the spring animation, all at slightly different times as
each icon finished animating at different times.
The problem is that toggling `reactive` on an `StWidget` incurs a style
change of the `insensitive` pseudo class, and style changes would quickly
queue relayouts incurring full stage reallocation. This occurred many times
during a spring animation hogging the CPU and limiting the frame rate.
The solution is defer and batch the cleanup for all icons until after the
last icon has finished animating. This way the CPU impact of the style
change and stage relayout isn't felt during the animation so the frame
rate remains higher and smoother. The overall CPU usage of the animation
is also reduced as the remaining relayouts are much more likely to be
grouped into a single frame.
Icon spring animation performance on an i7-7700:
Before: 83% CPU and 47 FPS
After : 78% CPU and 54 FPS
which is about a 22% increase in performance per clock (FPS/CPU).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/253
(cherry picked from commit a5e6dd52d2)
Since we started to show OSD windows on all monitors, OSD windows are
destroyed when the corresponding monitor is disconnected. We shouldn't
leave any signal handlers around in that case - they prevent the object
from being garbage collected, and trigger warnings for accessing proper-
ties of invalidated GObjects.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/602
The _sync function for Message only updates the close button visibility,
so we can safely stop doing that if the close button get get destroyed earlier
(as it happens when clicking on it).
https://bugzilla.gnome.org/show_bug.cgi?id=791233
(cherry picked from commit 87da623d86)
If the volume is removed before AUTORUN_EXPIRE_TIMEOUT_SECS seconds, we can stop
the timeout earlier as there's nothing to unset, while the volume instance
won't be valid anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
(cherry picked from commit 9c41736a81)
We must remove the GFile reference from the representing object when an
extension has been unloaded as this won't be used anymore later (e.g. as cached
ref).
(cherry picked from commit 72f5802be9)
Throw an error using an informative message in case a mode uses a stylesheet
that can't be loaded, instead of crashing later because the theming can't be
properly computed, and thus the minimum size of the actors.
(cherry picked from commit 30cb2127a1)
We currently assign the stylesheet to an extension whenever the file exists,
regardless of whether it actually loaded successfully or not.
And thus we load an extension that ships a stylesheet even if that file can't
be used.
There is no point in trying to load an extension if its stylesheet wasn't
loaded in the first place, so make sure this happens only on success.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/188
(cherry picked from commit 5b3ff7184e)
`NMConnectionDevice._sync()` is responsible for setting up the active
connection that we'll end up displaying. It expects the active
connection to already be in a map `_connectionItems`. If it isn't in
there, we get a null dereference and the indicator can get into a weird
state where it doesn't display devices / connections properly.
Let's change this expectation. If there is an active connection,
`_deviceAdded()` will eventually get to it and call `_sync()` to set up
the active connection state. We make `_sync()` tolerate there being no
active connection when it's called.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/140
(cherry picked from commit 5d61e2563d)
To be able to read the properties of the title correctly during the
first relayout of the overlay, the title, just like the border, can't be
hidden. Otherwise the title can be misaligned some pixels to the left
sometimes.
This slighty worsens the issue that windows moved to a separate
workspace using DND will show an overlay when the workspace is shown in
the overview even though no window is pointed at. Before this commit,
only the border would be visible for windows moved to another workspace,
now the title also is.
Avoid setting the width of the overlay title ourselves to keep the
default width of -1, this way StLabel will change its width by itself as
soon as the text is updated.
The width only needs to be changed if the window title changes, and we
don't animate it in this case anyway so there's no need to pass a width
to _animateOverlayActor().
Setting the title width to the preferred width on relayout is impossible
because get_preferred_width() will always return the width we set the
label to before. If the width is not set to -1, there's no way to get
the new preferred width without calculating it ourselves from the
underlying ClutterText instance.
https://bugzilla.gnome.org/show_bug.cgi?id=787260
Ensure that the search provider operations (just getResultMetas requests
in the current implementation) in progress are properly cancelled when we
clear the UI, otherwise returned results might still be added when not
needed.
This is triggered for each provider by the SearchResults reset.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/205
Currently when the overview is hidden, any pending search is kept alive,
not only at remote search provider level (as per issue #183), but even
the shell providers proxies continue to get and process data. This happens
even if this is not needed anymore, while the UI reset is performed only
next time that the overview is shown (causing some more computation
presentation time).
In order to stop this to happen, when the overview is hidden, we have to
unset the search entry to an empty value as this would make SearchResults
to have empty terms list and that would make the proxies cancellable to
be triggered (without causing any further search to start).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/205
The object manager tries to synthesize interface removal
events if the bus name of a remote object drops off the bus.
The code had bad typos in it, though: it reuses the `i`
index variable in its inner loop, where it should be using
the `j` index variable.
This commit corrects the i/j confusion.
The object manager tries to synthesize interface removal
events if the bus name of a remote object drops off the bus.
The code has a bad typo in it, though: it confuses `objectPaths`
(the list of all object paths) and `objectPath` (the object
currently being processed this iteration of the loop).
That leads to a failure to synthesize the interface removal
events, and spew in the log.
This commit corrects the objectPath/objectPaths confusion.
This may be the case where keyboardIndex is -1, which may be the
case where either the keyboard monitor hasn't been set yet, or
the keyboard is being unmanaged and meta_window_get_monitor
returns -1
https://bugzilla.gnome.org/show_bug.cgi?id=788882
(cherry picked from commit 19e864ed3b)
During global grabs, actors miss enter and leave events required
for correct hover tracking. This can cause the workspace switcher
to get stuck while slid out, so ensure the actor's hover state is
synced after drag operations.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/161
(cherry picked from commit 328c63bf64)
For windows, the cursor location needs to be adjusted by the frame
offsets. However we cannot assume that there is a window, as the
shell itself can have the key focus.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/414
(cherry picked from commit 0dee82fb9f)
When a dialog is added to a window while the overview is shown, we get
its parent using get_transient_for() so we can add it to the right
window clone.
If we have multiple layers of dialogs we have to do this recursively
until we find the root ancestor. This case currently results in an
infinite loop: Since parent is always set to the same window, the
while-condition will always be true.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/180
(cherry picked from commit 52cbc299a7)
We show a cover pane on top of the overview during transitions to
prevent issues caused by clicks and mouseover events when the overview
is not ready. Right now, this pane is only being shown on the primary
monitor, which obviosly allows interactions to happen before the
animations are finished on the secondary monitors.
To fix this, use the size of the whole stage for the cover pane.
(cherry picked from commit 02d06bb1f3)
Instead of consuming the event in front of the input method. Enter
is sometimes overriden by those, so it seems better to let the IM
handle the key event, and react later to it if it got propagated
anyway. That is what ::activate does, so use this signal.
This used to work before ClutterInputMethod/InputFocus because the
IM received the events directly from stage captured events. This
is not the case anymore.
Closes: #440
(cherry picked from commit 3ab9e9e8ad)
Maximized and tiled windows can be restored with a drag gesture,
not only from their titlebars, but also from any non-reactive
parts of the top bar above the window. Currently this only works
for actual pointer devices, extend the behavior to handle touch
as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/112
(cherry picked from commit 905801b178)
Key events involved in a keyboard shortcut are not completely consumed by
Mutter. That means that if the popupMenu is bound to a shortcut (e.g.
Alt<Space>) and the user keeps the keys pressed, the same key-event will be
delivered to the popupMenu. We can workaround this issue filtering out all the
events where a a modifier is down (except capslock).
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/372
(cherry picked from commit 2e90c5fa4b)
