Compare commits

...

515 Commits

Author SHA1 Message Date
Georges Basile Stavracas Neto
93b9bc789c gpu-kms: Protect against NULL crtc->current_mode
When failing to apply the CRTC mode, Mutter throws a warning
message. This warning message would try to access the name of
the CRTC's current mode.

There are ocasions, however, where the current mode is NULL.
On these cases, Mutter would crash.

Fix that by protecting against NULL CRTC modes.
2018-07-14 12:58:59 -03:00
Carlos Garnacho
161d2540e6 ClutterActor: Preserve valid paint volumes till the next relayout/repaint
Cuts down approximately all paint volume calculations when there's
windows that redraw frequently, but don't move.

https://bugzilla.gnome.org/show_bug.cgi?id=782344
2018-07-13 11:42:28 +00:00
Carlos Garnacho
94f4009882 compositor: Add get_paint_volume() implementation to MetaSurfaceActor
The special ::pick implementation there makes clutter fall into paths
that do require a get_paint_volume() implementation, or an infinite
area will be used.

Providing a paint volume here is easier on the invalidation mechanism.
2018-07-13 11:42:28 +00:00
Carlos Garnacho
ec8138773a compositor: Do not optimize obscured areas away in paint volumes
This optimization was presumably added before Clutter was able to
invalidate selected regions of an actor. Paint volumes are supposed
to be invariable as long as the actor conditions don't change.
Stacking of other actors shouldn't affect the paint volume, so it's
actually wrong to optimize those areas away here.
2018-07-13 11:42:28 +00:00
Jonas Ådahl
041be7c565 screen-cast-src: Allow negotiating the framerate
The framerate for screen cast sources was set to variable within 1 FPS
and the framerate of the monitor being screen casted. This meant that if
the sink didn't match the framerate (e.g. had a lower max framerate),
the formats would not match and a stream would not be established.

Allow letting the sink clamp the framerate range by setting it as
'unset', allowing it to be negotiated.
2018-07-13 08:59:14 +00:00
Jonas Ådahl
0407a8b33d screen-cast-src: Port to pipewire master
The PipeWire master branch saw some backports from the work branch,
including API changes making the 0.1 series more aligned with future
plans. Make mutter use the new API. This is needed to avoid dead locks
that existed in the older version.
2018-07-12 20:25:40 +00:00
Olivier Fourdan
912a6f5e3f contraints: Do not constrain modals without parent
xdg-foreign clears the `transient_for` of a modal dialog when its
imported parent is destroyed, which would later cause a crash in
`constrain_modal_dialog()` because the transient `NULL`.

So in case a modal dialog has no parent, do not try to constrain it
against its parent.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/174
2018-07-10 16:51:50 +02:00
Iain Lane
89162a90aa launcher: First check if we are in a login session
For mutter developers we still want to support running from a VT, which
will be in a different login session.

Fixes #218
2018-07-10 08:43:35 +00:00
Florian Müllner
90a68f3118 Bump version to 3.29.3
Update NEWS.
2018-07-09 18:37:32 +02:00
Florian Müllner
951fb03a7c build: Fix distcheck
The test fix in commit 859bea629b broke distcheck, probably because
abs_srcdir is prefixed with a relative $BUILDROOT. Hopefully this is
the last autotools breakage before switching to meson, so don't
bother investigating too much ...
2018-07-09 18:37:32 +02:00
Iain Lane
4837ea3434 meta-launcher: Find the current user's graphical session, not the pid's
If we're started by systemd --user, we might not be in the same session,
but this is nevertheless the one we are interested in.
2018-07-07 14:12:29 +01:00
Jonas Ådahl
3fbeeb9072 backends/x11: Force-update cursor when theme or size changed
Force update the cursor renderer after theme or size changes; otherwise
we'll be stuck with the old theme and/or size until something else
triggers resetting of the cursor.
2018-07-06 19:54:46 +02:00
Jonas Ådahl
0ca3526627 display: Make meta_display_get_workspace_manager() introspectable
So that it can be reached from Javascript.

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:54:46 +02:00
Jonas Ådahl
5b8c8a4114 display: Remove replaced signals
MetaDisplay still had workspace signals, but nothing emitted them,
meaning we wouldn't get warnings if handlers were added there instead
of to MetaWorkspaceManager.

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:54:46 +02:00
Jonas Ådahl
f635876eac x11: Open window decoration X11 connection earlier
If we wait with opening the X11 window decoration GDK connection, we
might end up with a terminated X11 server before we finish
initializing, depending on the things happening after spawning Xwayland
and before opening the MetaX11Dispaly. In gnome-shell, this involves
e.g. creating a couple of temporary X11 connections, and on disconnect,
if they happen to be the last client, the X server will terminate
itself.

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:54:46 +02:00
Jonas Ådahl
1caaf0cd1e display: Export meta_display_close()
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:17 +02:00
Jonas Ådahl
e2464660bc x11-display: Set the correct default Xcursor theme size
Under Xorg the cursor size preference was pre-scaled originating from
gtk, while with Wayland it came directly from GSettings remaining
unscaled. Under Xwayland this caused the X11 display code to set the
wrong size with HiDPI configurations, which was often later overridden
by the equivalent code in gtk, but not always.

Fix this by always having the cursor size preference unscaled, scaling
the size correctly where it's used, depending on how it's used.

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:17 +02:00
Armin Krezović
81c1c70c0a Move workspace related code from MetaDisplay to MetaWorkspaceManager
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:17 +02:00
Armin Krezović
e05cd6009a Add MetaWorkspaceManager skeleton
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:17 +02:00
Armin Krezović
390314adfb Rename errors.[ch] to meta-x11-errors.[ch]
Also rename meta_error_trap_* to meta_x11_error_trap_* and
move meta-x11-errors.c to src/x11

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:17 +02:00
Jonas Ådahl
2ac7afe8a9 remote-desktop: Remove unnecessary include
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:17 +02:00
Armin Krezović
d5c5669f2a Add --no-x11 flag so mutter wayland can be started without X11
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:17 +02:00
Armin Krezović
e8171ccdc1 Use MetaMonitorManager insted of MetaDisplay where possible
This drops display's monitors-changed signal and makes all
the code rely on MetaMonitorManager.

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:17 +02:00
Armin Krezović
43f9cd537e Fix XDND handling to work without GDK and MetaX11Display
This fixes mutter --nested --wayland without X11

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
d4c4d6e64d Split GDK initialization from MetaUI
Get rid of the deprecated gdk_display_get_default_screen ()

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Jonas Ådahl
89727aa747 xwayland: Destroy selection bridge windows before closing X11 display
Listen to the "x11-display-closing" signal so we can destroy the X11
selection bridge related windows before the X11 display is gone.

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
de5e7a7175 Don't use gtk_settings callback to set shell_shows_app_menu
GTK+ won't be initialized if X11 is not available

Instead, when setting gtk-shell-shows-app-menu,
meta_prefs_set_show_fallback_app_menu should be
called as well.

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
e6b885210c Make stack tracker work without X11
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
9f1ab1c3af Move workarea hint setting to MetaX11Display
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
9333a6da75 Make bell and libstartup-notification bits work without X11
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
8adab02757 Make workspace management work without X11
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Jonas Ådahl
14d8aec4b8 prefs: Allow no-op listener removal
Allow removing a prefs handler that was already removed. This allows us
to remove prefs from the dispose function without having to keep track
of it in every place.
2018-07-06 19:47:16 +02:00
Armin Krezović
8e7e1eeef5 Prepare for making MetaX11Display conditional
- Stop using CurrentTime, introduce META_CURRENT_TIME
- Use g_get_monotonic_time () instead of relying on an
  X server running and making roundtrip to it

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
0a8ae8417c Get rid of MetaScreen
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
1d5e37050d Stop using MetaScreen where it is unnecessary
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
b7c3dada81 Move workspace handling to MetaDisplay and MetaX11Display
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
d79ffd3976 Move UI and key grabs to MetaX11Display
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
6458139c04 Move mouse window tracking to MetaDisplay
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
82307dd694 Move xinerama management to MetaX11Display
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
e1c67a1824 Move monitor management API to MetaDisplay
This includes changing various users to use MetaDisplay directly, who
used MetaScreen only for this before.

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
68f261e8e2 Move rest of non-X11 specific objects from MetaScreen
This moves following objects from MetaScreen to MetaDisplay

- workareas_later and in_fullscreen_later signals and functions
- startup_sequences signals and functions
- tile_preview functions

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
1530f27513 Move X11 event, icon cache and property handling to MetaX11Display
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
05899596d1 Move X11 helper windows and xprops to MetaX11Display
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
98d912ba5f Move stack tracking and guard_window outside of MetaScreen
Move stack, stack_tracker to MetaDisplay guard_window to MetaX11Display

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
9e5ea8def4 Move groups and window/group prop hooks to MetaX11Display
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
722c975aca Move alarm and xids management to MetaX11Display
https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Jonas Ådahl
937a9853cd Unmanage compositor and windows when closing display
Instead of unmanaging when closing the display, which is closed when
closing the screen, unmanage them directly from meta_display_close().

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
cd8f4259be Move screen size and cursor setting to MetaDisplay
Split X11 specific parts into MetaX11Display. This also required
changing MetaScreen to stop listening to any signals by itself, but
instead relying on MetaDisplay forwarding them. This was to ensure the
ordering. MetaDisplay listens to both the internal and external
monitors-changed signal so that it can pass the external one via the
redundant MetaDisplay(prev MetaScreen)::monitors-changed.

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
c64d5ad8af Move X11 extension queries to MetaX11Display
Also split extension queries into their own functions

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
dacc041d0c Switch meta_error_trap functions to MetaX11Display
They are X11 specific functions, used for X11 code. They have been
improved per jadahl's suggestion to use gdk_x11_lookup_xdisplay and
gdk_x11_display_error_trap_* functions, instead of current code.

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
18779109de Start populating MetaX11Display
- Moved xdisplay, name and various atoms from MetaDisplay
- Moved xroot, screen_name, default_depth and default_xvisual
  from MetaScreen

- Moved some X11 specific functions from screen.c and display.c
  to meta-x11-display.c

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Jonas Ådahl
522f9b4c38 display: Emit signals when opening and closing X11 display
This is needed so that other parts can initialize and deinitialize X11
dependent functionality.

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Armin Krezović
3d2b9a3a69 Add MetaX11Display skeleton
Also reorder meta_display_open () and meta_display_close ()
to sort X11 and non-X11 specific members.

https://bugzilla.gnome.org/show_bug.cgi?id=759538
2018-07-06 19:47:16 +02:00
Jonas Ådahl
15fa7816bd configure.ac: Bump libmutter API version to 3 2018-07-06 19:47:16 +02:00
Jonas Ådahl
6621a9b5a0 tests: Add missing monitors config XML file
Lid switch test, but lid-switch.xml was not added, making it fail due to
theh file not being found.
2018-07-04 10:07:30 +00:00
Daniel van Vugt
04e411c2c0 compositor: Remove dead code: META_DISABLE_MIPMAPS
Seems to have been unused for quite some time.
2018-07-04 11:08:49 +08:00
Marco Trevisan (Treviño)
859bea629b tests: use abs_srcdir to refer to metatest files
These files are used to run mutter-test tools and using relative
paths won't work if the builddir doesn't match the srcdir.

This won't affect their installation (in case the build option is passed)
2018-06-29 22:20:34 +02:00
Jonas Ådahl
cbc783108e tests: run mutter-test tools with G_TEST_* env variables
Set test srcdir and builddir to the absolute paths
2018-06-29 22:20:34 +02:00
Fabio Tomat
2383801f7b Update Friulian translation 2018-06-29 13:33:53 +00:00
Sam Spilsbury
8626c69c2f window: Return -1 if meta_window_get_monitor is called on an unmanaged window
As opposed to crashing. In this case, letting the caller deal with
it is the best policy, since this is public API.

https://bugzilla.gnome.org/show_bug.cgi?id=788834
2018-06-28 16:24:07 +00:00
Jonas Ådahl
768ec15ea0 backends: Add logical monitor -> monitor -> output -> crtc ref chain
Make it so that each logical monitor has a reference to all the
monitors that are assigned to it.

All monitors has a reference to each output that belongs to it.

Each output has a reference to any CRTC it has been assigned.

https://bugzilla.gnome.org/show_bug.cgi?id=786929
2018-06-28 13:42:15 +02:00
Jonas Ådahl
1200182d70 backends: Move MetaOutput::crtc field into private struct
No functional changes. This is only done so that changes to reference
counting can done more reliably.

https://bugzilla.gnome.org/show_bug.cgi?id=786929
2018-06-28 13:42:15 +02:00
Jonas Ådahl
d9c18fd5bb monitor-manager: Add back warning messages
For some reason "backends: Remove X11 idle-monitor backend" removed
unrelated warning messages for when generated monitor configurations
that should work didn't, which also made the unit tests fail.

This commit adds them back, which also makes the tests pass again.
2018-06-28 11:23:39 +00:00
Miguel A. Vico
54709c16b5 wayland: Realize dmabuf buffers before trying to attach them
Commit 22723ca37 moved buffer realization to
meta_wayland_surface_commit() so that it wouldn't be part of
meta_wayland_buffer_attach().

However, creation of dmabuf buffers would call into
meta_wayland_buffer_attach() directly without realizing the buffer
first. attach() would then fail and mutter would effectively shut down
any clients using the zwp_linux_dmabuf protocol (note that if such
client was Xwayland, mutter itself would shut down as well).

Add the missing bit in order to make zwp_linux_dmabuf protocol work
again.
2018-06-21 21:47:05 +02:00
Daniel Șerbănescu
8da95b17f5 Update Romanian translation 2018-06-17 19:38:55 +00:00
Jordi Mas
d535c1eb6d Update Catalan translation 2018-06-17 10:31:36 +02:00
Miguel A. Vico
435b3c4bdb wayland: Create EGLStream-backed buffers through wl_eglstream_controller
One of the current limitations of EGLStreams is that there's no way to
resize a surface consumer without re-creating the entire stream.

Therefore, while resizing, clients will send wl_surface::attach requests
so the compositor can re-create its endpoint of the stream, but no
buffer will be available actually. If we proceed with the rest of the
attach operation we'll be presenting an empty buffer.

In order to fix this, a separate wl_eglstream_controller protocol has
been introduced that clients can use to request a stream re-creation
without overloading wl_surface::attach for that purpose.

This change adds the required logic to create the corresponding
wl_eglstream_controller global interface that clients can bind to.

Whenever a client requests a stream to be created, we just need to
create and realize the new EGLStream buffer. The same buffer resource
will be given at a later time to wl_surface::attach, whenever new
content is made available by the application, so we can proceed to
acquire the stream buffer and update the surface state.

https://bugzilla.gnome.org/show_bug.cgi?id=782575
2018-06-15 13:45:29 -07:00
Miguel A. Vico
22723ca371 wayland: Always realize buffers at surface commit time
Clients using EGLStream-backed buffers will expect the stream to be
functional after wl_surface::attach(). That means the compositor-side
stream must be created and a consumer attached to it.

To resolve the above, this change realizes buffers even when the attach
operation is deferred (e.g. synchronized subsurfaces).

https://bugzilla.gnome.org/show_bug.cgi?id=782575
2018-06-15 13:45:25 -07:00
Miguel A. Vico
edd3634bb5 wayland-buffer: Create EGLStream texture at buffer_realize time
When dealing with synchronized subsurfaces, we defer buffer attachments
until the parent surface state is applied.

That causes interaction issues with EGLStream backed buffers, as the
client expects the compositor-side stream to be functional after it
requests a wl_surface::attach.

By allowing the compositor to realize buffers without attaching them, we
could resolve the issue above if we define a realized EGLStream buffer
as a functional EGLStream (EGLStream + attached consumer).

This change moves the texture consumer creation part from the attach
function to the realize one.

https://bugzilla.gnome.org/show_bug.cgi?id=782575
2018-06-15 13:42:43 -07:00
Miguel A. Vico
1bf2eb95b5 renderer/native: Choose first EGL config for non-GBM backends
Commit 712ec30cd9 added the logic to only
choose EGL configs that match the GBM_FORMAT_XRGB8888 pixel format.
However, there won't be any EGL config satisfying such criteria for
non-GBM backends, such as EGLDevice.

This change will let us choose the first EGL config for the EGLDevice
backend, while still forcing GBM_FORMAT_XRGB8888 configs for the GBM
one.

Related to: https://gitlab.gnome.org/GNOME/mutter/issues/2
2018-06-15 19:43:04 +00:00
Jonas Ådahl
516fb524cb cursor-render/native: Realize hw cursor lazilly
Where to realize a hardware cursor depends on where on the screen it
will be displayed. For example it only needs buffers for the cursor
plane on a certain GPU if it overlaps with a monitor that is connected
said GPU.

Previously, we were too eager with uploading the cursor plane buffers,
which in effect resulted in the secondary GPU always being woken up
when changing the cursor, even though the cursor plane would actually
never be set unless the pointer cursor was moved to a monitor connected
to the secondary GPU. These wake-ups caused noticable stuttering; thus
by uploading the buffers more lazilly, the stuttering is avoided.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:56 +00:00
Jonas Ådahl
596b30096d cursor-renderer/native: Don't trigger redraw when cursor hidden
When a cursor is hidden, the native backend will properly hide the HW
cursor sprite as well, but it would communicate this as if the cursor
was not handled by the backend, while in fact it still was. This caused
the generic cursor rendering layer to queue a redraw.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:56 +00:00
Jonas Ådahl
7412794c66 cursor-renderer/native: Update hw state via generic update path
When force-updating the HW state we might end up with a situation where
the HW cursor is no longer usable. If this would happen, we'd before
this commit not trigger the fallback paths using a GL texture.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:55 +00:00
Jonas Ådahl
ad22b3f098 backend/native: Remove unnecessary cursor renderer update
It is already handled by the monitor-updated-internal signal handler in
meta-cursor-renderer-native.c, which will always be called indirectly
by resuming the monitor manager.

While at it, remove a useless comment.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:55 +00:00
Jonas Ådahl
206634e0ed cursor-renderer: Rename update_cursor function
Call it meta_cursor_renderer_update_cursor. This avoids confusing it
with the update_cursor MetaCursorRendererClass vfunc when navigating
the file.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:55 +00:00
Jonas Ådahl
ea05d2af49 cursor-renderer/native: Let the backend realize cursor sprite itself
It knows better when it's needed. For now, just do it just as before,
before drawing. Eventually, we can conditionalize where to realize
depending on the cursor sprite position.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:55 +00:00
Jonas Ådahl
6c7c566c6c cursor-renderer/native: Fix Xcursor image loading error handling
Check the return value whether there was an error, and change to
g_warning to warn while at it.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:54 +00:00
Jonas Ådahl
b596cf97ee cursor-renderer/native: Rename frame scheduling helper function
The function conditionally schedules a cursor animation frame, so
rename it to make that clearer.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:54 +00:00
Jonas Ådahl
9dcf9782b6 cursor-renderer: Centralize hw cursor realization paths
Use a common entry point into the cursor renderer implementations HW
cursor realization paths for all cursor sprite types. This is in
preparation for realizing at more strategic times.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:53 +00:00
Jonas Ådahl
0f519ffb05 cursor-renderer/native: Various whitespace fixes
https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:53 +00:00
Jonas Ådahl
42c78bd41f cursor-renderer/native: Fetch instead of pass wl_buffer when realizing
This is the next step in centralizing the cursor sprite hw sprite
realization paths.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:53 +00:00
Jonas Ådahl
b702c0fa5c cursor-renderer/native: Shorten some helper function names
Purely a cosmetic change, making a couple of unnecessarily long function
name shorter.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:53 +00:00
Jonas Ådahl
c80fd487f1 cursor-renderer: Fetch instead of pass Xcursor image when realizing
The end goal here is to being able to realize at any point in time
through a single API, so start by moving state into the cursor sprite
implementation.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:52 +00:00
Jonas Ådahl
817c8e568c wayland: Add wl_surface backed cursor sprite implementation
This removes the last use of the non-abstract form of MetaCursorSprite
usage.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:52 +00:00
Jonas Ådahl
b7e9388906 wayland/cursor-surface: Remove unnecessary NULL check
The priv->cursor_sprite is created on init() and destroyed on dispose()
so it will never be NULL when updating the cursor sprite texture.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:52 +00:00
Jonas Ådahl
b8336633a7 cursor-tracker: Split out XFIXES cursor code into cursor sprite type
Remove some X11 compositing manager specific code from the general
purpose cursor tracker into a new MetaCursorSprite based special
purpose XFIXES cursor sprite.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:51 +00:00
Jonas Ådahl
3c538d4a92 backends/cursor: Move out Xcursor functionality into own type
Introduce a new type MetaCursorSpriteXcursor that is a MetaCursorSprite
implementation backed by Xcursor images. A plain MetaCursorSprite can
still be created "bare bone", but must be manually provided with a
texture. These usages will eventually be wrapped into new
MetaCursorSprite types while turning MetaCursorSprite into an abstract
type.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:51 +00:00
Jonas Ådahl
2fc978ca9d backends/cursor: Rename X11 cursor creation function
It was prefixed with meta_cursor_, but it took a X11 Display, so update
the naming. Eventually it should be duplicated depending if it's a
frontend X11 connection call or a backend X11 connection call and moved
to the corresponding layers, but let's just do this minor cleanup for
now.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:51 +00:00
Jonas Ådahl
10dfc67dad backends/cursor: Minor whitespace cleanup
https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:50 +00:00
Jonas Ådahl
9ebcb719a1 backends/cursor: Clean up includes
Some were unnecessary, some were added even though not strictly needed.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:50 +00:00
Jonas Ådahl
2a20df0c50 backends/cursor: Make MetaCursorSprite derivable
This makes it possible to move out backing store specific code (such as
Xcursor handling) to separate units, while also making it easier to add
more types).

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:50 +00:00
Jonas Ådahl
d3441f7577 backends/cursor: Remove 'meta_' prefix from variable name
https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:49 +00:00
Jonas Ådahl
65c02e26db backends/cursor: Change variable name from 'self' to 'sprite'
This makes it somewhat more descriptive.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:49 +00:00
Jonas Ådahl
50ff9d4c71 wayland: Rename cursor role types
Rename the two cursor role types according to the convention used by the
other roles. This means that MetaWaylandSurfaceRoleCursor was renamed to
MetaWaylandCursorSurface, and MetaWaylandSurfaceRoleTabletCursor was
renamed to MetaWaylandTabletCursorSurface. The corresponding filenames
were renamed accordingly too.

https://gitlab.gnome.org/GNOME/mutter/issues/77
2018-06-15 19:09:49 +00:00
Jonas Ådahl
a3269dde95 idle-monitor: NULL check cached InhibitedActions property variant
We might not have a cached "InhibitedActions" property available for us,
so do as elsewhere in this file and NULL check before processing it.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/130
2018-06-14 17:52:11 +02:00
Daniel Stone
f2dea5d139 renderer-native: Remove no_add_fb2
drmModeAddFB2 allows userspace to specify a real format enum on
non-ancient kernels, as an improvement over the legacy drmModeAddFB
which derives format from a fixed depth/bpp mapping.

As an optimisation, Weston used to decide at the first failure of
drmModeAddFB2 that the ioctl was unavailable: as non-existent DRM
ioctls return -EINVAL rather than -ENOSYS or similar, bad parameters are
not distinguishable from the ioctl not being present.

Mutter has also implemented the same optimisation for dumb framebuffers,
which potentially papers over errors for the gain of avoiding one ioctl
which will rapidly fail on ancient kernels. Remove the optimisation and
always use AddFB2 where possible.

Closes: #14
2018-06-14 15:25:31 +00:00
Carlos Garnacho
3649795108 wayland: Detach MetaWaylandActorSurface from its actor on dispose
And ensure the actor is no longer reactive even though it might live longer
because of close effects, GCs, and whatnot. This ensures the actor is not
eligible for pointer picking within the destruction of its surface.

Closes: #188
2018-06-14 14:05:10 +02:00
Yi-Jyun Pan
36b9551f92 Update Chinese (Taiwan) translation 2018-06-13 08:36:21 +00:00
Carlos Garnacho
6abe4703c7 core: Hide close dialog before destroying
The MetaCloseDialog implementation object may stay artifically alive
for a longer period. This was usually fine till gnome-shell commit
b03bcc85aad, as the check_alive() timeout will keep running even
though the window went unmanaged/destroyed, leading to crashes.

In order to fix this, forcibly hide the dialog if it is visible and
the window is being unmanaged, so the timeout is stopped in time.
2018-06-08 17:41:34 +02:00
Carlos Garnacho
69ca584168 wayland: Handle get_subsurface() with a role-less parent surface
The order of role creation is undetermined, so we can't account that
the parent surface will have a role (and an actor) at the time of
creating the wl_subsurface role for a child surface.

So we must do it both ways, add the subsurface as a child on
get_subsurface() if the parent already got a role, and lazily add
child subsurface actors to the current one if the parent surface got
it at a later point.

Related: #132
2018-06-08 17:31:25 +02:00
Jonas Ådahl
8ee14a7cb7 renderer/native: Also wrap flip closures for EGLStreams
When using the EGLStream backend, the MetaRendererNative passed a
GClosure to KMS when using EGLStreams, but KMS flip callback event
handler in meta-gpu-kms.c expected a closure wrapped in a closure
container, meaning it'd instead crash when using EGLStreams. Make the
flip handler get what it expects also when using EGLStreams by wrapping
the flip closure in the container before handing it over to EGL.

https://bugzilla.gnome.org/show_bug.cgi?id=790316
2018-06-07 22:14:05 +02:00
Jonas Ådahl
909dbafd67 settings: Remove confused comment
It got lost, lets help it find the way out.
2018-06-07 12:57:52 +00:00
Jonas Ådahl
d5203f170e Make screen cast and remote desktop non-experimental
It's time to make this feature more accessible by not requiring editing
an array in gsettings.
2018-06-07 12:57:51 +00:00
Corentin Noël
2a45b7de7c clutter-input-device-xi2: Check for null group_modes before unref 2018-06-07 12:54:56 +01:00
Daniel van Vugt
62c67be4c8 clutter-actor: Fix uninitialized matrix multiply
`modelview` is uninitialized and the `apply` function just multiplies it.
What we really want is to initialize `modelview` so replace `apply` with
`get`.

Who knows what bugs this may have caused...
2018-05-31 15:43:27 +08:00
Marco Trevisan (Treviño)
0332b7394e renderer-native: Don't crash if the FB surface can't be locked 2018-05-29 22:13:03 +00:00
Marco Trevisan (Treviño)
15f41c9f68 device-manager-evdev: Add main seat to seats by default
Treat the main seat as other seats, so we don't have to handle it differently
in specific places. This was already the case before when a real device
was plugged before the startup, but not applied when hotplugging a device.
2018-05-29 10:35:51 +00:00
Marco Trevisan (Treviño)
2a38601b42 device-manager-evdev: Free the main seat on finalize 2018-05-29 10:35:51 +00:00
Marco Trevisan (Treviño)
d7bdc1591f device-manager-evdev: Set and unset the stage for the main seat too
When no input devices are available on startup the device manager might be fast
enough to be constructed so that no default stage is set yet, and thus when
main seat virtual devices are created they won't have a proper stage set.
If then we plug a real device, the events that an input manager could generate
won't be associated to any stage and thus won't be processed.

We need then ensure that when we update the stage for the device manager we
(un)associate it also to the main seat devices.
2018-05-29 10:35:51 +00:00
Changwoo Ryu
bd36764b4d wayland: Don't reset input focus on text commit
Preedit text can be active even after text commit. Resetting the input
focus will lead to unintended commit of the preedit text.

https://gitlab.gnome.org/GNOME/mutter/issues/152

Closes: #152
2018-05-26 18:58:42 +09:00
Olivier Fourdan
473bf38753 frames: Allow for unknown mouse buttons
Commit 47131b1d ("frames: Handle touch events") introduced an assert to
make sure that all mouse button actions are handled in mutter.

However, mice can have a more than 5 buttons, so simply ignore the
"other" actions instead of aborting.

Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/160
2018-05-25 09:20:36 +00:00
Florian Müllner
f7747e4d4f Bump version to 3.29.2
Update NEWS.
2018-05-24 17:12:55 +02:00
Dz Chen
e8dc2acfca Update Chinese (China) translation 2018-05-21 16:18:26 +00:00
Georges Basile Stavracas Neto
cf734999fb wayland: Compare geometries after chaining up
After 20176d03, the Wayland backend only synchronizes with the
compositor after a geometry was set, and it was different from
the current geometry.

That commit was mistakenly comparing the geometry before chaining
up, which would yield a false negative on the case where the
client didn't call set_geometry() before commit().

Fix that by caching the old geometry locally, chain up (and thus
apply the new geometry rectangle), then comparing the old and
current geometry rectangles.

Fixes https://gitlab.gnome.org/GNOME/mutter/issues/150
2018-05-18 13:09:10 +00:00
Daniel van Vugt
c9c3283540 shaped-texture: Disable mipmapping during animation
This avoids overwhelming the GPU with trying to update mipmaps at a high
rate. Because doing so could easily cause a reduction in the compositor
frame rate and thus actually reduce visual quality.

In the case of a window that is constantly animating in the overview,
this reduces mutter's render time by around 20%-30%.
2018-05-18 16:45:26 +08:00
Marcos Lans
d2a8cdfd7c Update Galician translation 2018-05-15 22:33:40 +00:00
Marco Trevisan (Treviño)
3e85ac8131 clutter-device-evdev: Get devices from main seat if no real seat is set
In devices such as ARM boards there could be no input devices connected on
startup, leading to a crash when we try to process artificial events that
could be queued (as gnome-shell does when syncing pointer).

Those events still should refer to a device and, in case we don't have one
provided by libinput we should still return the core devices defined in the
main seat.
2018-05-15 12:09:59 +01:00
Marco Trevisan (Treviño)
5f83d9a5c8 clutter-seat-evdev: Add function to get device by id 2018-05-15 12:05:39 +01:00
Carlos Garnacho
ac20bf2000 frames: Handle touch events
This is just done on wayland as it'll break horribly on X11, we let
this happen through pointer emulated events in XISelectEvents evmask
instead.

Some things had to be made slightly more generic to accomodate touch
events. The MetaFrames shall lock onto a single touch at a time, we
don't allow crazy stuff like multi-window drag nor multi-edge resizes.

https://bugzilla.gnome.org/show_bug.cgi?id=770185
2018-05-14 17:11:57 +01:00
Carlos Garnacho
3561082aba frames: Make 1st button/motion handlers take generic events
This will ease handling of touch events through these same handlers.

https://bugzilla.gnome.org/show_bug.cgi?id=770185
2018-05-14 13:44:03 +01:00
Florian Müllner
e34c330f66 build: Adjust to filename changes
The meta-stage and meta-window-group headers got split into a public
and private part, but the Makefiles still reference the old files.
2018-05-07 22:41:01 +02:00
Florian Müllner
7655e09d00 build: Introspect some more types
While MetaStage, MetaWindowGroup and MetaDBusDisplayConfigSkeleton don't
appear explicitly in the public API, their gtypes are still exposed via
meta_get_stage_for_screen(), meta_get_*window_group_for_screen() and
MetaMonitorManager's parent type. Newer versions of gjs will warn about
undefined properties if it encounters a gtype without introspection
information, so expose those types to shut up the warnings.

https://bugzilla.gnome.org/show_bug.cgi?id=781471
2018-05-07 21:44:47 +02:00
Florian Müllner
be069fb8ae window-group: Remove undefined function declaration
Ever since the function has been made public, its name has been
meta_actor_is_untransformed() ...

https://bugzilla.gnome.org/show_bug.cgi?id=781471
2018-05-07 21:44:47 +02:00
Florian Müllner
a30166a547 clutter: Don't reference invalid pc in gir
Cally is built into clutter itself rather than exposed as a separate
library.

https://bugzilla.gnome.org/show_bug.cgi?id=781471
2018-05-07 21:44:47 +02:00
Jonas Ådahl
0f9c6aef99 screen-cast: Handle PipeWire errors more gracefully
Various code assumed PipeWire function calls would never fail. Some can
actually fail for real reasons, and some currently can only fail due to
OOM situations, but we should still not assume that will always be the
case.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/102
2018-05-07 19:24:47 +00:00
Jonas Ådahl
332d55f7f6 wayland/xdg-foreign: Fix child surface validation check
The role type should be either an xdg-shell toplevel, or a
xdg-shell unstable v6 toplevel.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/138
2018-05-07 19:16:40 +00:00
Jonas Ådahl
98d7024288 wayland/xdg-foreign: Send immediate destroy event to correct resource
The destroyed signal that was emitted if an imported surface was not
available when created, for example if the handle was invalid or
already unexported, was emitted on the wrong resource.
2018-05-07 19:16:39 +00:00
Florian Müllner
82564772dc build: Don't fail immediately when logind is missing
We require logind for the native backend, but the backend itself is
optional. However since commit 06c357d78, we will always throw an
error if neither logind nor elogind are available, even when the
backend is disabled.

As we still support "auto" - that is, whether the native backend is
enabled depends on whether its dependencies are available - the
easiest option is to make sure we always include either elogind or
libsystemd in the dependency check rather than erring out explicitly
if neither is found.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/96
2018-05-07 19:50:20 +02:00
Florian Müllner
33c2a38ff7 main: Fix typo 2018-05-04 20:15:33 +02:00
Olivier Fourdan
52fdd24467 wayland: avoid a crash in is_effectively_synchronized()
To check if a subsurface is effectively synchronized, we walk the
subsurface hierarchy to look for a non-subsurface parent or a subsurface
being synchronized.

However, when client is closing, the parent surface might already be
gone, in which case we end up with a surface being NULL which causes a
NULL pointer dereference and a crash.

Check if the parent surface is NULL to avoid the crash, and consider
it's already synchronized if it is NULL to avoid further updates.

Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/124
2018-05-03 11:39:33 +02:00
Florian Müllner
2319cd9c40 idle-monitor: Don't try to auto-start SessionManager
The interface is provided by gnome-session and not activatable.

https://gitlab.gnome.org/GNOME/mutter/issues/134
2018-04-30 13:55:41 +00:00
Daniel Șerbănescu
3b4319a87c Update Romanian translation 2018-04-30 05:56:32 +00:00
Georges Basile Stavracas Neto
20176d0395 wayland: Check if state and size changed before calling move_resize()
The current implementation of the XdgSurface v6 protocol does not check
if the window changed before calling meta_window_wayland_move_resize().

The problem with this approach is that calling this function is a costly
operation since we enter the compositor side. In GNOME Shell case, it is
in JavaScript, which triggers a GJS trampoline. Calling this function on
every mouse movement is naturally as terrible as it could be - and is
exactly what happens now.

This commit adds the necessary checks to only call move_resize() when
the window actually changed, or when it needs to be updated.

https://bugzilla.gnome.org/show_bug.cgi?id=780292
Issue: #78
2018-04-25 23:33:41 -03:00
Georges Basile Stavracas Neto
762a3f89a9 wayland: Add function to query if window needs move or resize
This will be used by the next commit to determine when a window
geometry change should be ignored or not. Normally, it would be
enough to just check if the position and sizes changed.

The position, in this case, is relative to the client buffer, not
the global position. But because it is not global, there is one,
admitedly unlikely, situation where the window state is updated
while the client size and relative positions don't change.

One can trigger this by e.g. tiling the window to the half-left of
the monitor, then immediately tile it to half-right. In this case,
the window didn't change, just it's state, but nonetheless we need
to notify the compositor and run the full move/resize routines.

When that case happens, though, the MetaWindowWayland is tracking
the pending state change or a move. And this is what we need to
expose.

https://bugzilla.gnome.org/show_bug.cgi?id=780292
Issue: #78
2018-04-25 21:55:05 -03:00
Georges Basile Stavracas Neto
822c2666f5 window: Let implementations finish state changes
In the old, synchronous X.org world, we could assume that
a state change always meant a synchronizing the window
geometry right after. After firing an operation that
would change the window state, such as maximizing or
tiling the window,

With Wayland, however, this is not valid anymore, since
Wayland is asynchronous. In this scenario, we call
meta_window_move_resize_internal() twice: when the user
executes an state-changing operation, and when the server
ACKs this operation. This breaks the previous assumptions,
and as a consequence, it breaks the GNOME Shell animations
in Wayland.

The solution is giving the MetaWindow control over the time
when the window geometry is synchronized with the compositor.
That is done by introducing a new result flag. Wayland asks
for a compositor sync after receiving an ACK from the server,
while X11 asks for it right away.

Fixes #78
2018-04-25 21:55:05 -03:00
Florian Müllner
b412e6c493 Bump version to 3.29.1
Update NEWS.
2018-04-25 20:25:43 +02:00
Jonas Ådahl
ae26cd0774 native: Restore previous EGL state after blitting onto secondary GPU
Before we just set it to "none", but this was not enough since various
calls will depend on not just the context being active, but the main
rendering surface.

Fixes https://gitlab.gnome.org/GNOME/mutter/issues/21
2018-04-25 17:22:24 +02:00
Marco Trevisan (Treviño)
3104d697c0 cogl: Do not unref a NULL object
Add return-if-fail statement to avoid deferencing NULL object
2018-04-25 09:03:58 +00:00
Jonas Ådahl
0b3a1c9c31 monitor-manager: Find active monitor when deriving global scale
When deriving the global scale directly from the current hardware state
(as done when using the X11 backend) we are inspecting the logical
state they had prior to the most recent hot plug. That means that a
primary monitor might have been disabled, and a new primary monitor may
not have been assigned yet.

Stop assuming a primary monitor has an active mode before having
reconstructed the logical state by finding some active monitor if the
old primary monitor was disabled. This avoids a crash when trying to
derive the global scale from a disabled monitor.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/130
2018-04-25 10:50:50 +02:00
Carlos Garnacho
423c5f8e77 wayland: Let IM events go through
These paths implicitly relied on the forwarded IM key events having
a source_device backed by a real HW device. This assumption is no
longer held true since commit b5328c977.

Explicitly check the INPUT_METHOD flag so they are handled as they
should despite not being "real HW" events.
2018-04-24 23:48:01 +02:00
Mario Sanchez Prada
3bbff94878 backend: Don't center the pointers on monitor changes
As a follow up to the patch from a95cbd0a, we need to make sure
that the pointer is out of the way as well when monitors changed,
since that's the event that will prevail in some cases. Besides,
this is also consistent with what the code before a95cbd0a was,
which initialized the pointer position in the same way both in
this case and in the real_post_init() function.

Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/157
2018-04-24 21:58:38 +01:00
Carlos Garnacho
4ef886f51e wayland: Avoid actor updates non actor_surface role wl_surface.commit
We used to maintain an actor for cursors, even though we would possibly
use hw overlays or even some other overlay actor for those. This happens
no more, so check whether we are dealing with an actor-backed surface role
before fiddling with it.
2018-04-23 21:31:19 +02:00
Carlos Garnacho
22485ba36f wayland: Refactor surface actor into MetaWaylandActorSurface
All surface roles that do need a backing actor inherit from this
class, it makes sense to move actor management there. This also
means the MetaWaylandActorSurface is in charge of emitting
::geometry-changed on the MetaWaylandSurface.
2018-04-23 21:31:19 +02:00
Carlos Garnacho
8df2a1452c wayland: Notify actively of xwayland window/surface associations
Instead of scheduling a meta_later, keep track of the unassociated
windows, and look for matches as soon as the MetaWaylandSurface is
created on our side.

This will ensure the surface is given the Xwayland role before receiving
the first wl_surface.commit.
2018-04-23 21:31:19 +02:00
Carlos Garnacho
b12c92e206 wayland: Add MetaWaylandSurface::geometry-changed signal
Abstract this instead of having callers connect to notify:: signals
on the surface actor.
2018-04-23 21:31:19 +02:00
Carlos Garnacho
70036429bd wayland: Abstract access to the actor corresponding to a wl_surface
The actor itself will be shuffled around, abstract all external
access to it behind a function to make that easier later on.
2018-04-23 12:24:46 +02:00
Carlos Garnacho
44502be560 wayland: Do not reset frame list when merging pending state
In the synchronized subsurface case, the destination list may
contain other elements from previous wl_surface.commit calls.
Resetting the list will leave those dangling frame callbacks
that will lead to invalid writes when those get to be destroyed
(eg. on client shutdown).
2018-04-22 00:52:48 +02:00
Carlos Garnacho
8cf42cd06c clutter: Plug minor leak
clutter_stage_manager_list_stages() returns a copied list, which
should be freed.
2018-04-22 00:52:19 +02:00
Carlos Garnacho
b5328c977e clutter: Set slave=master in IM forwarded key events
The fix is twofold. On one hand, it makes sense not to relate IM (nor
any other) generated events to a HW device. On the other hand, if we
are unfortunate that an IM event is in flight when we are switching
to another TTY, it may arrive at a time when the source device is no
longer existent.
2018-04-22 00:52:05 +02:00
Marco Trevisan (Treviño)
4339b23dd0 theme, frames: Use surface device scale instead of cairo_scale
Gtk now is caching the themed cairo surfaces, then as per
commit gtk@e36b629c the surface device scale is used to figure
out the current paint scaling.

Without this when using background-image's for window buttons
the -gtk-scaled icons isn't properly resized.

Fixes #99
2018-04-20 14:38:57 +00:00
Mario Sanchez Prada
a95cbd0aca backends: Don't center the pointer on initialization
Centering the pointer at startup causes undesired behaviour if
it ends up hovering over reactive elements, that might react
to that positioning, causing confusion. This is the case of
the login dialog when a list of different users is shown, as
centering the pointer at startup in that case will get the
user in the center of the screen pre-selected, which is not
the expected behaviour (i.e. pre-selecting the first one).

Fix this by simply moving the pointer out of the way, close
to the bottom-right corner, during initialization.

Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/157
2018-04-18 19:14:26 +00:00
Olivier Fourdan
6df2b7af55 clutter/evdev: Don't ignore CAPS lock as modifier
Mark CAPS lock as a modifier (as it should) so that when using XKB
options to change the default behaviour of CAPS lock, the new assigned
key can by used as a sticky key as well.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/112
2018-04-18 17:07:21 +02:00
Olivier Fourdan
c01b099dbd clutter/evdev: ignore injected events from IM
Input method can inject key events, which leads to multiple reported key
press/release events for a single user action.

Ignore those events as this confuses keyboard accessibility.
2018-04-18 17:07:21 +02:00
Ray Strode
2d80fd02e7 xwayland: Don't abort if Xwayland crashes
Right now if Xwayland crashes, we crash, too.

On some level that makes sense, since we're supposed to control the
lifecycle of Xwayland, and by it crashing we've lost that control.

But practically speaking, the knock-on crash adds noise to the logs,
bug trackers, and retrace servers that only makes debugging harder.
And the crash isn't something mutter can "fix", since it's
ultimately from a bug in Xwayland anyway.

This commit makes mutter exit instead of crash if Xwayland goes away
unexpectedly.
2018-04-17 11:14:00 -04:00
Ray Strode
bb65854065 xwayland: use g_autoptr for GError in xserver_died
Right now we explicitly g_clear_error any error we find, but that
makes it tricky to return early from the function, which a
subsequent commit will want to to do.

This commit switches GError to use g_autoptr so the error clearing
happens automatically.
2018-04-17 11:14:00 -04:00
Georges Basile Stavracas Neto
bc05e49eba gpu-kms: Return NULL, not FALSE
Another small mistake spotted while working on #77. This
function returns a pointer, thus we should return NULL,
not FALSE.

Issue: #77
2018-04-16 16:30:21 +02:00
Georges Basile Stavracas Neto
773b8384fa monitor-manager-kms: Don't add GPU if it fails
This is a small mistake spotted while working on a solution
for #77. When a GPU fails to initialize, we're adding them
anyway, which might have pretty bad consequences when trying
to use these NULL GPUs.

Issue: #77
2018-04-16 16:30:21 +02:00
Georges Basile Stavracas Neto
7fdac6d310 monitor-manager-kms: Use g_autoptr for error
A minor code cleanup.
2018-04-16 16:30:21 +02:00
Jonas Ådahl
f6cd87734d native: Disable the use of KMS modifiers by default
Make it re-enable:able by a hidden "experimental feature". To enable, add
"kms-modifiers" to the org.gnome.mutter.experimental-features GSettings entry.
2018-04-16 16:29:38 +02:00
Bastien Nocera
01a0fa9437 idle-monitor: Add ResetIdletime API, for testing purposes
The ResetIdletime API can be used instead of an "XTest" binary to
programmatically reset the idle time, as if the user pressed a button on
a keyboard.

This is necessary since we stopped using the XSync extension to monitor
idletimes, as it didn't consider inhibitors as busy, and mutter's
clutter code ignores "Core Events" as generated by XTest.

This patch will require minimal changes to gnome-settings-daemon's power
test suite so that "key press" idletime resets are triggered through
this D-Bus interface rather than through XTest and a roundtrip through
the X server.

https://bugzilla.gnome.org/show_bug.cgi?id=705942
2018-04-16 13:28:03 +02:00
Bastien Nocera
657417a578 backend: Reset idle when lid is opened or resuming from suspend
There's no particular reason for this code to only ever be triggered on
Wayland, and allows removing X11-specific work-arounds from
gnome-settings-daemon.

See https://bugs.freedesktop.org/show_bug.cgi?id=59576

https://bugzilla.gnome.org/show_bug.cgi?id=705942
2018-04-16 13:28:03 +02:00
Bastien Nocera
4af00ae296 idle-monitor: Take idle inhibition into account
Take idle inhibitions into account for when to fire idle watches as
requested by OS components.

This should stop gnome-session and gnome-settings-daemon considering
the session idle when they have been inhibited for longer than their
timeout, for example to avoid the screensaver activating, or the
computer suspending after watching a film.

https://bugzilla.gnome.org/show_bug.cgi?id=705942
2018-04-16 13:28:03 +02:00
Bastien Nocera
84e575be77 x11: Allow XTest and core events to reset idletime
Now that we've removed the X11 specific backend of the idle monitor,
add back a cut-down version of it for the explicit purpose of being
told about idle time resets when XTest events are used.

XTest events are usually used by test suites and remote display software
to inject events into an X11 session. We should consider somebody moving
the mouse remotely to be just as "active" as somebody moving it locally.

https://bugzilla.gnome.org/show_bug.cgi?id=705942
2018-04-16 13:28:03 +02:00
Bastien Nocera
7945ee5beb backends: Remove X11 idle-monitor backend
And use the old "native" backend for both X11 and Wayland. This will
allow us to share fixes between implementations without having to delve
into the XSync X11 extension code.

https://bugzilla.gnome.org/show_bug.cgi?id=705942
2018-04-16 13:28:03 +02:00
Carlos Garnacho
b6f5bab212 wayland: Plug surface pending state contents leak
When moving the pending state of an effectively synchronized subsurface
so it is applied together with the parent, perform a merge of the source
MetaWaylandPendingState into the destination one, instead of simply
overwriting the struct.

The other approach had 2 kind of leaks, one that would happen everytime
a wl_surface.commit happens on a sync subsurface (both surface/buffer
damage regions are leaked). The other more unlikely one would apply on
the rest of pending state data, happening whenever the compositor gets
>1 wl_surface.commit calls on the subsurface before the parent surface
gets its own.

The function has also been renamed to use the more descriptive "merge"
term.

Related: gnome-shell#64
2018-04-12 23:35:20 +02:00
Aleksandr Mezin
5ad34e0efb monitor-manager: fix output ids returned by GetResources
Output ID is set equal to 'i' later in the loop. But 'i' was never
incremented, so all outputs were getting the same ID (equal to
the number of CRTCs, because 'i' was reused from the previous loop).


(cherry picked from commit 23c3f8bb18)
2018-04-11 17:57:25 +00:00
Matej Urbančič
a1c34aad09 Updated Slovenian translation 2018-04-10 17:58:55 +02:00
Benjamin Otte
98dfd5b887 screen-cast: Fix compile error
Credit goes to gcc for finding this typo.
2018-04-10 13:02:51 +02:00
Olivier Fourdan
17a745bf81 wayland: update enter/leave output after effects
Compositor effects change the actor size and position, which can lead to
inconsistent output enter/leave notifications, leaving clients' surfaces
without any output set.

Update output enter/leave notifications after all compositor effects are
completed so that we give clients accurate output location.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/104
2018-04-09 10:19:26 +02:00
Olivier Fourdan
85bbd82ae8 window-actor: add new signal "effects-completed"
When using plugins, the effects will affect the MetaWindowActor size
and position.

Add a new signal "effects-completed" wired to the corresponding
MetaWindowActor which is emitted when all effects are completed so that
derived objects can be notified when all effects are completed and use
the actual size and position.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/104
2018-04-09 10:19:26 +02:00
Marco Trevisan (Treviño)
deda7a5235 theme: Scale titlebar spacing when computing x
The value is not scaled by default so it needs to be adjusted
depending on the window scaling, as it's done in other places.

Fixes: #87
2018-04-03 20:27:21 +00:00
Marco Trevisan (Treviño)
96141e28f9 theme: add ".appmenu" class to the appmenu button
So it does gtk headerbar, so mutter should do.
2018-04-03 20:16:15 +00:00
Daniel Stone
e6109cfc22 renderer-native: Fall back to non-modifier GBM surfaces
If we attempt GBM surface allocation with a set of modifiers but the
allocation fails, fall back to non-modifier allocations. This fixes
startup on Pineview-based Atom systems, where KMS provides us a set of
modifiers but the GBM implementation doesn't support modifier use.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/84
2018-04-03 18:17:04 +00:00
Carlos Garnacho
3684f6b0ac clutter: Apply input hints/purpose on ClutterTextInputFocus focus in
And make the ClutterText-level properties independent from the input
focus, as those properties can be set anytime, not just when the
ClutterText actor is focused.

https://gitlab.gnome.org/GNOME/mutter/issues/66

Closes: #66
2018-04-03 14:55:17 +00:00
Alberts Muktupāvels
31b5059068 input-settings: Fix a typo in tap-and-drag setting 2018-03-29 09:51:32 -05:00
Olivier Fourdan
ebff7fd7f4 cursor-renderer-native: take rotation into account
Rotating an output would show duplicate cursors when the pointer is
located over an area which would be within the output if not rotated.

Make sure to swap the width/height of the output when rotated.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/85
2018-03-29 06:34:37 +00:00
Daniel van Vugt
6e415353e3 renderer-native: Swap then await earlier flips.
Rendering the next frame (which mostly happens as part of the flush done
in swap buffers) is a task that the GPU can complete independently of
the CPU having to wait for previous page flips. So reverse their order
to get the GPU started earlier, with the aim of greater GPU-CPU
parallelism.
2018-03-29 13:35:59 +08:00
Olivier Fourdan
67917db45f wayland: Use cursor position in logical monitor
When using two monitors size by side with different scales, once the
cursor moves from one output to another one, its size changes based on
the scale of the given output.

Changing the size of the cursor can cause the cursor area to change
output again if the hotspot is not exactly at the top left corner of the
area, causing the texture of the cursor to change, which will trigger
another output change, so on and so forth causing continuous surface
enter/leave event which flood the clients and eventually kill them.

Change the logic to use only the actual cursor position to determine if
its on the given logical monitor, so that it remains immune to scale
changes induced by output scale differences.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/83
2018-03-23 15:12:37 +01:00
Yussuf Khalil
8286557a05 clutter: Avoid unnecessary relayouts in ClutterText
We can save an unnecessary relayout if the required size to fully draw the text
is equal to the currently allocated size after the underlying text buffer or
attributes that only affect the PangoLayout have changed.
2018-03-22 21:21:43 +01:00
Georges Basile Stavracas Neto
63e2c0329f window: Fix a small memory leak 2018-03-21 21:16:23 -03:00
Rasmus Thomsen
06c357d781 mutter: allow building with elogind
This commit allows building mutter with elogind, which is
systemd-logind extracted into a standalone package. This
allows using mutter with its native-backend ( and consequently
wayland ) enabled on distros which use init systems other than
systemd.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/46
2018-03-21 21:42:37 +01:00
Carlos Garnacho
2f260edf19 cogl: Read pixels as per the stored format
By the looks of it, commit 95e9fa10ef was taping over an Intel DRI bug
that would make it return post-swizzling pixel data on glReadPixels().
There's been reports over time of that commit resulting in wrong colors
on other drivers, and lately Mesa >17.3 started showing the same symptoms
on Intel.

But texture swizzling works by changing parameters before fragment shaders
and reading pixels from an already drawn FBO/texture doesn't involve those.
This should thus use pixel_format_to_gl_with_target(), which will result in
correctly requesting the same pixel format than the underlying texture,
while still considering it BGRA for the upper layers in the swizzling case.

https://gitlab.gnome.org/GNOME/mutter/issues/72

Closes: #72
2018-03-21 18:45:20 +00:00
Ting-Wei Lan
a5fd9a6e2f main: Fix build when native backend is disabled 2018-03-21 13:14:51 +00:00
Ting-Wei Lan
4e6114b14d configure: Don't declare functions in AC_TRY_LINK and AC_TRY_COMPILE
https://bugzilla.gnome.org/show_bug.cgi?id=792717
2018-03-21 13:14:50 +00:00
Ting-Wei Lan
65630d6310 build: Use portable sed syntax in src/Makefile.am
Replace non-portable \+ with \{, \} to avoid build failure on systems
not using GNU sed.

https://bugzilla.gnome.org/show_bug.cgi?id=792280
2018-03-21 13:14:50 +00:00
handsome-feng
b8a81128e0 Fix some spelling errors
https://gitlab.gnome.org/GNOME/mutter/merge_requests/45
2018-03-21 13:22:35 +08:00
Matej Urbančič
19e55b9a8c Added Slovenian translation 2018-03-20 22:39:36 +01:00
Dušan Kazik
9ea9352c93 Update Slovak translation 2018-03-17 20:53:06 +00:00
Carlos Garnacho
817a76a7f5 wayland: Add parentheses around logical AND
As "suggested" by gcc and -Werror. Introduced by commit cb40049ec.
2018-03-16 16:59:14 +01:00
Carlos Garnacho
cb40049ec1 wayland: Ignore IM/synthetic key events when updating XKB state
This state tracks hardware devices' state, thus shouldn't be triggered by
events that were emulated/forwarded by the IM. Those may include modifiers
and would result in xkb_state being doubly set, and possibly stuck.

https://gitlab.gnome.org/GNOME/mutter/issues/74

Closes: #74
2018-03-15 18:44:07 +01:00
Carlos Garnacho
481e87032c clutter: Give the ClutterTextInputFocus a first stab at handling key events
Actor keybindings were dispatched in an earlier return path, which means
the IM doesn't get to see certain key events. Flip the order around so the
IM has an opportunity to handle all keypresses.

https://gitlab.gnome.org/GNOME/mutter/issues/65

Closes: #65
2018-03-13 20:00:10 +00:00
Emin Tufan Çetin
bf5ac39d46 Update Turkish translation 2018-03-13 17:15:33 +00:00
Florian Müllner
47856d9701 Bump version to 3.28.0
Update NEWS.
2018-03-12 19:45:19 +01:00
Mart Raudsepp
06429b12e2 Update Estonian translation 2018-03-12 17:29:38 +00:00
Carlos Garnacho
419fb81d40 wayland: Fix wrong condition in xdg_exporter.export
Commit d714a94d9 added support for stable xdg-shell surfaces while
preserving old unstable zxdg-shell v6 ones, but committed a mistake
in checking for both in the xdg_exporter.export error condition
paths. We want to check that the surface is neither of both.

https://gitlab.gnome.org/GNOME/mutter/issues/63

Closes: #63
2018-03-12 17:15:07 +00:00
Anders Jonsson
f1bbe5c251 Update Swedish translation 2018-03-11 20:28:03 +00:00
Chao-Hsiung Liao
27fef44d48 Update Chinese (Taiwan) translation 2018-03-10 12:20:08 +00:00
Georges Basile Stavracas Neto
00b8ca7aeb Revert "window: Raise and lower tile match in tandem"
Raising and lowering windows in tandem without a proper grouping
mechanism ended up being more annoying than functional.

This reverts commit e76a0f564c.
2018-03-09 20:13:14 +01:00
Ask Hjorth Larsen
675d429ba0 Updated Danish translation 2018-03-07 22:37:47 +01:00
Marek Cernocky
f4d754c934 Updated Czech translation 2018-03-07 19:33:55 +01:00
Florian Müllner
8ae79182c1 Bump version to 3.27.92
Update NEWS.
2018-03-05 20:01:34 +01:00
Jonas Ådahl
712ec30cd9 renderer/native: Force EGL config pixel format
We just arbitrarily chose the first EGL config matching the passed
attributes, but we then assumed we always got GBM_FORMAT_XRGB8888. That
was not a correct assumption. Instead, make sure we always pick the
format we expect.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/2
2018-03-05 15:42:27 +00:00
Jonas Ådahl
7a41483ea0 egl: Fail first config choosing when no results
If there was no matching config, fail to find the first one.

https://gitlab.gnome.org/GNOME/mutter/issues/2
2018-03-05 15:42:27 +00:00
Jonas Ådahl
b4d642be52 egl: Rename EGL simple config chooser
It just picked the first config, so name it accordingly.

https://gitlab.gnome.org/GNOME/mutter/issues/2
2018-03-05 15:42:26 +00:00
Carlos Garnacho
0bf0e5780c clutter/x11: Communicate proper group/mode on pad events.
So we can trigger actions for the right mode.

https://gitlab.gnome.org/GNOME/mutter/issues/48

Closes: #48
2018-03-03 16:07:24 +00:00
Carlos Garnacho
d7c5e57134 clutter/x11: Implement missing ClutterInputDevice pad vmethods
Use libwacom to be able to find out modes, groups and button roles on
pad devices.

https://gitlab.gnome.org/GNOME/mutter/issues/48

Closes: #48
2018-03-03 16:07:23 +00:00
Egmont Koblinger
67bf936ef8 theme: Fix icon scaling
When painting the titlebar, button icons that aren't available in the
desired size need to be scaled. However the current code inverses the
scale factor, with the result that the adjusted icons are much worse
than the original icons, whoops.

This went unnoticed for a long time given that most icons are availa-
ble in the desired 16x16 size, and the most likely exceptions - window
icons - are not shown by default.

https://gitlab.gnome.org/GNOME/mutter/issues/23
2018-03-03 15:48:35 +00:00
Fran Dieguez
15b7b40ea8 Update Galician translation 2018-03-03 13:18:53 +00:00
Aurimas Černius
81bff3eba6 Updated Lithuanian translation 2018-03-03 13:37:54 +02:00
Claude Paroz
da3fd8f7fb Updated French translation 2018-03-03 11:19:13 +01:00
GNOME Translation Robot
6e125d9d04 Update Dutch translation 2018-03-01 18:56:38 +00:00
GNOME Translation Robot
80705018f9 Update Scottish Gaelic translation
(cherry picked from commit 543d031a55)
2018-03-01 10:46:47 +00:00
Mario Blättermann
f39dacd451 Update German translation 2018-02-27 20:02:50 +00:00
Carlos Garnacho
33c070cdd5 backends/x11: Plug a leak 2018-02-27 14:10:04 +01:00
Carlos Garnacho
8d2f794bd3 clutter/x11: Plug a leak 2018-02-27 14:09:48 +01:00
Bastien Nocera
1458dc394a build: Fix build with older versions of wayland-protocols
Instead of bailing out when a seemingly random file is missing, require
the version of wayland-protocols that includes the source to create that
built file.

Introduced in d714a94
2018-02-27 11:18:15 +01:00
Milo Casagrande
c93877abb5 Update Italian translation 2018-02-26 07:58:26 +00:00
Rūdolfs Mazurs
ef0efc9589 Update Latvian translation 2018-02-25 13:47:46 +00:00
Gwan-gyeong Mun
09cdf39b68 Update Korean translation 2018-02-24 08:05:34 +00:00
Balázs Úr
a6ccbbfe68 Update Hungarian translation 2018-02-23 22:54:11 +00:00
Jonas Ådahl
e502adfa04 remote-desktop, screen-cast: Add version number to D-Bus APIs
In order to let applications gracefully handle version mismatches, add
a version property to the APIs. Also add a warning on the APIs that
these are not meant for public consumption.
2018-02-23 19:33:31 +08:00
Jonas Ådahl
8dd377da38 remote-desktop: Add support for discovering supported device types
This is so that application will not try to send touch events when
touch is not supported.
2018-02-23 19:33:31 +08:00
Jonas Ådahl
03a12f9458 remote-desktop: Add touch screen event support 2018-02-23 19:33:31 +08:00
Jonas Ådahl
061f69f2a2 remote-desktop: Fix absolute pointer motion coordinates
If the coordinates was for a stream not at the stage position (0, 0),
they'd be incorrect. Fix this by correctly translating the coordinates
according to the stream position.
2018-02-23 19:33:31 +08:00
Jonas Ådahl
4d5e1f690d screen-cast-stream: Add API to transform relative coordinates
Will be used to translate stream local coordinates to stage coordinates.
2018-02-23 19:33:31 +08:00
Jonas Ådahl
f3203f0330 screen-cast-session: Add API to get stream from object path
Will be needed by the remote desktop session to translate stream local
input coordinates.
2018-02-23 19:33:31 +08:00
Jonas Ådahl
d27e6921d6 remote-desktop: Add relative pointer motion event support
Relative pointer motions are assumed to be pre-accelerated.
2018-02-23 19:33:31 +08:00
Jonas Ådahl
c459ad7932 remote-desktop: Add smooth scroll event support 2018-02-23 19:33:31 +08:00
Jonas Ådahl
5ee825c081 remote-desktop: Add keyboard keycode event support
Keyboard keycode events will act as a physical keyboard thus depend on
the active keyboard layout.
2018-02-23 19:33:31 +08:00
Jonas Ådahl
1ead513b66 remote-desktop: Support multiple axis steps at once
Just call the corresponding clutter API once for each step.
2018-02-23 19:33:31 +08:00
Jonas Ådahl
9ed236bd67 remote-desktop: Fix notify axis input validity check
The check was inverted; allowed axis are 0 and 1, not the other way
around.
2018-02-23 19:33:31 +08:00
Jonas Ådahl
a1517cae1c clutter/device-manager: Add way to check virtual device support
This is needed so that mutter can let applications using the remote
desktop API to know whether touch screens are supported.
2018-02-23 19:33:31 +08:00
Jonas Ådahl
542502be53 clutter/x11: Add pointer motion support to virtual devices
As the other virtual input event delivery mechanisms, this also uses
the XTEST protocol.
2018-02-23 19:33:31 +08:00
Jonas Ådahl
203a0b37ed clutter: Add smooth scroll and touch API to virtual devices
So far only implemented on the evdev backend,as X11 doesn't support touch
devices nor smooth scrolling via XTEST.
2018-02-23 19:33:31 +08:00
Jonas Ådahl
b6477a826d clutter/evdev: Don't treat device touch slots as seat slots
IF two touch devices have colliding touch point IDs they'd interfere on
the seat. To avoid this, always allocate a seat wide slot for each
device wide slot, but don't use device slots directly in the seat.
2018-02-23 19:33:31 +08:00
Jonas Ådahl
95adc45b71 clutter/evdev: Move touch notification to seat 2018-02-23 19:24:07 +08:00
Jonas Ådahl
f20daf567d clutter: Silence gtk-doc warning 2018-02-23 19:24:07 +08:00
Jonas Ådahl
4345906663 wayland: Define abstract role types as actually abstract
They should not be instantiated by themself, only as actual roles.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/5
https://bugzilla.gnome.org/show_bug.cgi?id=791938
2018-02-23 19:07:49 +08:00
Jonas Ådahl
d714a94d97 wayland: Add support for stable xdg-shell
This commit adds support for xdg_shell (the stable version). This was
done by first copying the old xdg-shell unstable v6 implementation into
a separate .c .h file pair (including various symbol renaming) then
porting the old xdg-shell unstable v6 implementation to the new stable
version.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/5
https://bugzilla.gnome.org/show_bug.cgi?id=791938
2018-02-23 18:57:53 +08:00
Jonas Ådahl
514c7028f4 wayland: Use helper to set shell surface window
The helper deals with updating the surface output state.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/5
https://bugzilla.gnome.org/show_bug.cgi?id=791938
2018-02-23 18:57:50 +08:00
Jonas Ådahl
44624736c5 wayland: Push actor state instead of itself pulling
Make the Wayland objects push the state relevant to their role to the
MetaSurfaceActor instead of MetaSurfaceActorWayland pulling the state
from the associated surface.

This makes the relationship between the actor and the objects that
constructs it more clear; the actor is a drawable that the protocol
objects control, not the other way around.

This will make it easier to "detach" a surface actor from a surface,
which is necessary when unmapping a window while the underlying surface
is yet to be destroyed and potentially reused.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/5
https://bugzilla.gnome.org/show_bug.cgi?id=791938
2018-02-23 18:57:47 +08:00
Jonas Ådahl
0162cdf8ef surface-actor/wayland: Minor style fixes
https://gitlab.gnome.org/GNOME/mutter/merge_requests/5
https://bugzilla.gnome.org/show_bug.cgi?id=791938
2018-02-23 18:57:45 +08:00
Jonas Ådahl
7e17dd0098 xwayland: Base Xwayland surface role object on the actor role
The Xwayland role uses a MetaSurfaceActorWayland just so lets share
logic related to it. As a side effect, wl_surface.enter/leave starts
working for Xwayland surfaces.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/5
https://bugzilla.gnome.org/show_bug.cgi?id=791938
2018-02-23 18:57:42 +08:00
Jonas Ådahl
704b73b041 wayland: Restructure surface role building blocks code
This commit moves out non-core wl_surface related code into separate
code units, while renaming types to fit a common scheme. The changes
done are:

 * ClutterActor based surface roles built upon
   MetaWalyandSurfaceRoleActorSurface. This object has been renamed to
   MetaWaylandActorSurface and related functionality has moved into
   meta-wayland-actor-surface.c.

 * The code related to roles backed by a MetaWindow (i.e. built upon
   MetaWaylandShellSurface) was moved into meta-wayland-shell-surface.c

 * The majority of subsurface related code was moved into into
   meta-wayland-subsurface.c and the object was renamed
   MetaWaylandSubsurface.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/5
https://bugzilla.gnome.org/show_bug.cgi?id=791938
2018-02-23 18:57:40 +08:00
Jonas Ådahl
bd5e36cf0e wayland/surface: Stop using deprecated g_object_newv
Replace it with g_object_new_with_properties. This fixes a warning
about using deprecated API.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/5
https://bugzilla.gnome.org/show_bug.cgi?id=791938
2018-02-23 18:57:38 +08:00
Jonas Ådahl
dbf56e24cb wayland/xdg-shell: Minor cosmetic cleanups
https://gitlab.gnome.org/GNOME/mutter/merge_requests/5
https://bugzilla.gnome.org/show_bug.cgi?id=791938
2018-02-23 18:57:36 +08:00
Jonas Ådahl
0371897e22 wayland/xdg-shell: Standardize xdg_positioner Wayland vfunc naming
Use the convention [interface]_[request] (..) used elsewhere in the
file.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/5
https://bugzilla.gnome.org/show_bug.cgi?id=791938
2018-02-23 18:57:34 +08:00
Jonas Ådahl
cc5fe05c4d wayland/xdg-shell: Standardize object class interface vfunc names
Follow the convention that MetaSomeObject's class vfuncs should be
named meta_some_object_said_vfunc.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/5
https://bugzilla.gnome.org/show_bug.cgi?id=791938
2018-02-23 18:57:28 +08:00
Jonas Ådahl
d8f13f6b4c wayland: Shorten MetaWaylandSurfaceRoleShellSurface name
It was annoyingly long, so rename it to MetaWaylandShellSurface.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/5
https://bugzilla.gnome.org/show_bug.cgi?id=791938
2018-02-23 18:57:25 +08:00
Jonas Ådahl
a2959510e5 .gitignore: Add more things to ignore
Various protocol files had not been added.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/5
https://bugzilla.gnome.org/show_bug.cgi?id=791938
2018-02-23 18:57:16 +08:00
Robert Mader
c8fbd4bee8 src/Makefile.am: Remove redundant generation rules
https://bugzilla.gnome.org/show_bug.cgi?id=792203
2018-02-23 18:52:58 +08:00
Fran Dieguez
d5631f793e Update Galician translation 2018-02-23 00:50:09 +00:00
Милош Поповић
d4d160a186 Update Serbian Latin translation 2018-02-22 13:03:55 +00:00
Марко Костић
4719c3f31e Update Serbian translation 2018-02-22 13:02:35 +00:00
Daniel Mustieles
1f5a2d6029 Updated Spanish translation 2018-02-22 12:40:22 +01:00
Olivier Fourdan
19bf4cf4f8 x11: Do not discard shape region for undecorated windows
mutter would discard the shape region set by the client if its matches
the entire client area in meta_window_x11_update_shape_region().

However, if the window is later resized (maximized or other), the
compositor will fail to update the shape region properly for undecorated
windows because the shape region was discarded, which causes black areas
to appear in place of the updated areas.

If the client window is undecorated, keep the shape region even if when
it matches the client area.

https://gitlab.gnome.org/GNOME/mutter/issues/27

Closes: #27
2018-02-22 08:02:01 +00:00
Louis-Francis Ratté-Boulianne
6f59e4858e renderer/native: Don't use modifiers to import linear DMA buffer
When the buffer modifier is DRM_FORMAT_MOD_LINEAR, we can use the
old code path. That means not specifying any modifier parameter.

It was an issue when the primary GPU was creating a linear GBM surface
and that a secondary GPU (not supporting modifiers) was trying to
import it. It was failing because the driver could not use the
import_modifiers extension even though it could in theory easily
import the buffer.

https://gitlab.gnome.org/GNOME/mutter/issues/18
2018-02-22 14:01:48 +08:00
Louis-Francis Ratté-Boulianne
aec85281ba native/renderer: Retrieve the right modifiers set for each GPU
We were retrieving the supported KMS modifiers for all GPUs even
though what we really need to intersect between these sets of
modifiers:

1) KMS supported modifiers for primary GPU if the GPU is used for
   scanout;

2) EGL supported modifiers for secondary GPUs (different than the
   primary GPU used for rendering);

3) GBM supported modifiers when creating the surface (already
   taken care of by gbm_surface_create_with_modifiers());

https://gitlab.gnome.org/GNOME/mutter/issues/18
2018-02-22 14:01:48 +08:00
Louis-Francis Ratté-Boulianne
b22875aae9 renderer/native: Use the right EGL image parameters for extra planes
There was a typo for modifier parameter of planes 1 & 2.

https://gitlab.gnome.org/GNOME/mutter/issues/18
2018-02-22 14:01:48 +08:00
Jonas Ådahl
962712ddc2 configure.ac: Bump API version number
Better late then never.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/6
2018-02-21 23:52:32 +08:00
Florian Müllner
de29627855 Bump version to 3.27.91
Update NEWS.
2018-02-21 01:09:22 +01:00
Carlos Garnacho
54dcff3aa2 backends: Monitor changes in active tools' settings
So the changes can be instantly applied while the tool is in proximity.
Before we would just do it on proximity-in, which doesn't provide a
good look&feel while modifying the tool settings in g-c-c.

https://gitlab.gnome.org/GNOME/mutter/issues/38

Closes: #38
2018-02-19 17:15:26 +01:00
Carlos Garnacho
bcd5882081 clutter: Check the ClutterTextInputFocus has focus before filtering events
Checking correct state is responsibility of the ClutterInputFocus user, and
it is indeed possible to get a focused ClutterText while its
ClutterInputFocus didn't get itself focused (eg. lack of IM).

https://gitlab.gnome.org/GNOME/mutter/issues/36

Closes: #36
2018-02-18 15:22:13 +01:00
Carlos Garnacho
69f56578a3 build: Fix distcheck
Missing protocol XML in wayland_protocols/EXTRA_DIST.

https://gitlab.gnome.org/GNOME/mutter/issues/35

Closes: #35
2018-02-18 12:32:04 +01:00
gogo
c00e092456 Update Croatian translation 2018-02-17 15:01:10 +00:00
Rafael Fontenelle
a8cee14417 Update Brazilian Portuguese translation 2018-02-16 17:05:45 +00:00
Fran Dieguez
8a89b0007c Update Galician translation 2018-02-14 22:46:11 +00:00
Carlos Garnacho
6934b83f44 wayland: Avoid clutter_input_focus method calls when unfocused
If text_input_enable() is called when there no active IM (eg. running plain
mutter), some ClutterInputFocus method calls that are not allowed while
unfocused will end up called, triggering critical warnings.

If there is no IM return early here, all other calls are superfluous then.
2018-02-12 14:44:30 +01:00
Carlos Garnacho
37aab9280a clutter/text: Be more pervasive at updating input method state
More concretely, ensure preedit text goes away after commit/focus_out,
and update cursor position right after focus_in.
2018-02-12 14:44:30 +01:00
Kukuh Syafaat
49e8bc8a52 Update Indonesian translation 2018-02-10 15:04:22 +00:00
Gwan-gyeong Mun
abd6b7affd Change naming of GParmSpec enum id string for naming consistency
GParamSpec enum string usually follows "PROP_" prefix and PROP_LAST is used
for last PROP string.

https://gitlab.gnome.org/GNOME/mutter/issues/28

Closes: #28
2018-02-10 13:49:14 +01:00
Florian Müllner
748223b896 cogl-texture: Remove unused function
Commit d8f2f583e6 removed the only caller.
2018-02-09 14:01:12 +01:00
Carlos Garnacho
c75eac27a8 wayland: Handle NULL event node/vendor/product on tablet methods
We currently don't handle NULLs on these correctly, yet they can be
so when running nested. Just refrain from sending those wp_tablet(_pad)
events in that case.
2018-02-09 13:39:15 +01:00
Peter Hutterer
ac502c921d backends/x11: wacom pressure curve is a 32-bit property
The property has been 32 bits since around 2011 and has not changed, mutter
expects it to be 8 bits. The mismatch causes change_property to never
actually change the property.

https://gitlab.gnome.org/GNOME/mutter/issues/26

Closes: #26
2018-02-09 12:28:56 +01:00
Piotr Drąg
134765c634 Update Polish translation 2018-02-08 02:08:46 +01:00
Carlos Garnacho
5149d6eb40 wayland: Fix handling of INCR transactions
The window checks in the XPropertyEvent handler were wrong both
ways, so transfers would be left stale after the first chunk was
dealt with.

https://gitlab.gnome.org/GNOME/mutter/issues/1

Closes: #1
2018-02-07 19:29:28 +01:00
Carlos Garnacho
006cdac531 wayland: Use read_all() when reading wayland selections
Plain input stream read() calls don't provide hard guarantees about
the number of bytes read, but the async method callback sort of
relies on bytes being less than requested only when reaching the
end of the transmitted data. If that happens mid transfer, that
doesn't bode well.

This is actually the behavior of g_input_stream_read_all(), so
switch to using it.
2018-02-07 19:29:28 +01:00
Jonas Ådahl
61bc1a7d6f clutter/x11: Remove video memory purge API
Clutter doesn't handle it anyway, and mutter now creates the
CoglRenderer object itself so we don't need this API anymore.

https://bugzilla.gnome.org/show_bug.cgi?id=739178
2018-02-07 11:04:51 +08:00
Jonas Ådahl
86ab3878e7 renderer/x11: Enable GPU memory purge error extension if available
This was done by the clutter X11 backend before prior to introducing
MetaRenderer, but during that work, enabling of said extension was lost.
Let's turn it on again.

https://bugzilla.gnome.org/show_bug.cgi?id=739178
2018-02-07 11:04:07 +08:00
Jonas Ådahl
f2d0e5021a cogl/x11/renderer: Silence introspection warning
We don't introspect CoglRenderer, so we shouldn't introspect API using it
either.

https://bugzilla.gnome.org/show_bug.cgi?id=739178
2018-02-07 11:03:42 +08:00
Fabio Tomat
6d8286614f Update Friulian translation 2018-02-06 21:44:19 +00:00
Jonas Ådahl
70fcf745b8 main: Add --x11 command line argument
This is in order to force running as a X11 window manager/compositing
manager. Useful for debugging and other cases where the automatic
detection does not work as expected.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/15
2018-02-06 03:14:52 +00:00
Olivier Fourdan
589e999049 wayland: Do not fail on stalled .X11-unix entries
If for whatever reason, there are stalled files in /tmp/.X11-unix/ the
bind() to the abstract socket will succeed but not the bind() to the
to the UNIX socket.

This causes gnome-shell/mutter to fail because it cannot start Xwayland
(while it could actually, by using a different display).

In case of failure to bind to the UNIX socket, try the next display
instead of failing, to avoid stalled entries in /tmp/.X11-unix.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/13
2018-02-05 11:36:19 +00:00
George Kiagiadakis
d8f2f583e6 cogl-texture: refuse downloading textures in cogl_texture_get_data() on GLES
On drivers that do not support glGetTexImage2D (i.e. on GLES),
cogl_texture_get_data() has a "feature" that allows it to download
texture data by rendering the texture on an intermediate framebuffer
object and then reading back the data from there. However, this
feature requires the user to have previously set an "active"
framebuffer object in the context, which makes this very tricky
because it is not clear to the developer that he needs to do that
in order for some code to work on GLES (of course it works on
desktop GL, so nobody notices...) and additionally the code actually
crashes if an active fbo is not set!

This patch basically removes this feature in order to prevent
the crash and is in line with how this code has evolved in cogl-2.0:
https://git.gnome.org/browse/cogl/commit/?id=6d6a277b8e9a63a8268046e5258877ba94a1da5b

https://bugzilla.gnome.org/show_bug.cgi?id=789961
2018-02-05 11:22:36 +00:00
Olivier Fourdan
db866eb052 wayland: send shortcut inhibit “active” event
The shortcut inhibitor protocol states that the “active” event should be
sent every time compositor shortcuts are inhibited on behalf of the
surface.

However, mutter would send that event only if the surface is focused,
which might not be the case if focus is on a shell surface.

Send the “active” event unconditionally to match the protocol
definition.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/10
2018-02-05 09:06:49 +00:00
Jonas Ådahl
d092e913d6 gpu-kms: Don't add outputs without modes
There seems to be a kernel race when one disconnects an external
monitor connected to a DisplayPort via a USB-C adapter. The race
results in a connector being reported as connected, but without any
modes supported.

This had the side effect that we tried to set a preferred mode to
the first listed mode, but as no modes were available, we instead tried
to dereference the first element of a NULL array, causing a
segmentation fault.

Mitigate this by skipping adding output if no supported modes are
advertised and the output doesn't support scaling, while moving the
fallback path for calculating a preferred output mode to after possibly
adding the common modes, to avoid the unvolentary NULL dereference.

https://bugzilla.gnome.org/show_bug.cgi?id=789501
2018-02-05 10:38:54 +08:00
Andika Triwidada
6147be3dff Update Indonesian translation 2018-02-04 12:28:55 +00:00
Carlos Garnacho
57f55d486d backends/x11: Preserve XI1 XDevice throughout ClutterInputDevice lifetime
Opening and closing the device may result into XI2 grabs being cut short,
resulting into pad buttons being rendered ineffective, and other possible
misbehaviors. This is an XInput flaw that fell in the gap between XI1 and
XI2, and has no easy fix. It pays us for mixing both versions, I guess...

Work this around by keeping the XI1 XDevice attached to the
ClutterInputDevice, this way it will live long enough that this is not
a concern.

Investigation of this bug was mostly carried by Peter Hutterer, I'm just
the executing hand.

https://gitlab.gnome.org/GNOME/mutter/issues/7

Closes: #7
2018-02-01 11:02:01 +01:00
Jeff Smith
6be56de140 backends/x11: Fix time-comparison bug causing hang
A comparison in translate_device_event() does not account for the fact
that X's clock wraps about every 49.7 days.  When triggered, this causes
an unresponsive GUI.

Replace simple less-than comparison with XSERVER_TIME_IS_BEFORE macro,
which accounts for the wrapping of X's clock.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/12
2018-02-01 15:34:12 +08:00
Olivier Fourdan
206ca43c91 wayland: No need to check for keyboard
meta_wayland_compositor_is_shortcuts_inhibited() does not need to check
if the provided source is an actual keyboard.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/8
2018-01-31 16:04:20 +01:00
Jason Gerecke
f8f1bcfa9e backends: Add support for Wacom stylus tertiary-button-action
The tertiary-button-action (see bug 790028) is a place for g-c-c to store
the action which should be performed when a stylus' third button is pressed.
Pressing this button is signaled as a BTN_STYLUS3 event from the kernel or
X11 button 8.

https://bugzilla.gnome.org/show_bug.cgi?id=790033
2018-01-30 19:28:02 +01:00
Jason Gerecke
91df801ffb clutter/evdev: Add support for BTN_STYLUS3
BTN_STYLUS3 is defined by the Linux 4.15 kernel and is sent when the
third button on a stylus is pressed. At the moment, only Wacom's "Pro
Pen 3D" has three stylus buttons. Pressing this button triggers a button
8 event to be sent under X11, so we use the same mapping here.

https://bugzilla.gnome.org/show_bug.cgi?id=790033
2018-01-30 19:28:02 +01:00
Olivier Fourdan
97f142d1cc x11/window: Mark restored workspace as “set”
When a window's workspace is not NULL, on_all_workspace should be FALSE.
Similarly, when on_all_workspace is TRUE, the window workspace should be
NULL.

This is an assumption in multiple places in the code, including when
setting the workspace state, the window is either added or removed from
all workspaces only if the window's workspace is NULL.

This rule is initially enforced at creation in _meta_window_shared_new()
when a initial workspace is set. However, when the initial workspace is
set from the session info, the initial workspace is not marked as “set”
which leads to an assertion failure when unmanaging windows, because the
window is not removed from all the workspaces.

When applying the session info to a window, mark the workspace as “set”.

https://gitlab.gnome.org/GNOME/mutter/issues/4

Closes: #4
2018-01-30 10:08:58 +01:00
Balázs Úr
5ea3a4ecbb Update Hungarian translation 2018-01-26 20:48:01 +00:00
Olivier Fourdan
fbd5a74a0b session: use initial workspace if no workspace set
Having “on_all_workspaces_requested” FALSE on a window does not imply a
workspace is set.

If the X11 window is placed on a secondary monitor while workspaces
applies on primary monitor only  (“workspaces-only-on-primary” set) then
“on_all_workspaces_requested” is FALSE while “on_all_workspaces“ is TRUE
and the associated workspace is NULL, leading to a crash when saving the
gnome-shell/mutter session.

So if no workspace is set, use the “initial_workspace” instead to avoid
a NULL pointer dereference.

https://bugzilla.gnome.org/show_bug.cgi?id=792818
2018-01-25 10:47:44 +01:00
Ray Strode
58bb61e161 clutter/stage: Set framebuffer state directly
clutter_set_viewport always operates on the draw fb, but
mutter sometimes has an offscreen fb it uses instead.

This commit uses the non-deprecated, clutter_framebuffer_set_viewport
function, which takes an explicit fb argument.

Closes: https://gitlab.gnome.org/GNOME/mutter/merge_requests/2
2018-01-25 11:41:54 +08:00
Jonas Ådahl
dbd053020a settings: Avoid warning when clearing xwayland grab access lists
On the first run, they are NULL, so don't try to free them.

https://bugzilla.gnome.org/show_bug.cgi?id=792853
2018-01-25 11:40:03 +08:00
Jonas Ådahl
c063d43be8 screen-cast: Update to pipewire 0.1.8 API
Remove per micro version code, the API changed too much to keep both in
place.

https://bugzilla.gnome.org/show_bug.cgi?id=792854
2018-01-25 11:40:03 +08:00
Ray Strode
35b77a61c8 Merge branch 'wip/fmuellner/clean-up-shortcut-settings' into 'master'
Clean up shortcut settings

See merge request GNOME/mutter!1
2018-01-24 21:11:27 +00:00
Florian Müllner
32547d2eff data: Don't expose window shading shortcut
GTK+ doesn't support shading of client-side decorated windows, and likely
never will (not least because shading is conceptually questionable if the
app customizes the titlebar), and neither do other CSD implementations like
Chromium's. A shortcut that only works with a decreasing number of windows
is more confusing than helpful, so don't expose it.

https://bugzilla.gnome.org/show_bug.cgi?id=645460
2018-01-24 19:09:27 +01:00
Florian Müllner
dc37ee2782 data: Don't expose horizontal workspace keybindings to Settings
Given that GNOME has used a vertical workspace layout ever since 3.0,
allowing users to assign keyboard shortcuts for horizontal workspace
navigation isn't useful at all, as rightfully pointed out by Bastien
Nocera.

https://bugzilla.gnome.org/show_bug.cgi?id=645460
2018-01-24 19:09:27 +01:00
Jonas Ådahl
371e5df568 remote-desktop-session: Don't always warn about axis steps
The condition for warning was wrong, causing it to always warn no
matter the input.

https://bugzilla.gnome.org/show_bug.cgi?id=792062
2018-01-24 12:15:27 +08:00
Daniel Stone
cc4e007148 renderer/native: Create GBM surfaces with modifiers
Now that we have the list of supported modifiers from the monitor
manager (via the CRTCs to the primary planes), we can use this to inform
EGL it can use those modifiers to allocate the GBM surface with. Doing
so allows us to use tiling and compression for our scanout surfaces.

This requires the Mesa commit in:
Mesa 10.3 (08264e5dad4df448e7718e782ad9077902089a07) or
Mesa 10.2.7 (55d28925e6109a4afd61f109e845a8a51bd17652).
Otherwise Mesa closes the fd behind our back and re-importing will fail.
See FDO bug #76188 for details.

https://bugzilla.gnome.org/show_bug.cgi?id=785779
2018-01-24 11:42:30 +08:00
Daniel Stone
c0d9b08ef9 renderer/native: Use modifier-aware GBM API
Newer versions of GBM support buffer modifiers, including multi-plane
buffers. Use this new API to explicitly pull the information from GBM,
and feed it to drmModeAddFB2WithModifiers.

https://bugzilla.gnome.org/show_bug.cgi?id=785779
2018-01-24 11:39:01 +08:00
Daniel Stone
d99cd279d2 renderer/native: Use drmModeAddFB2 where available
drmModeAddFB2 allows specifying multiple planes, as well as directly
specifying the format, rather than relying on a depth/bpp -> format
mapping.

https://bugzilla.gnome.org/show_bug.cgi?id=785779
2018-01-24 11:35:07 +08:00
Daniel Stone
d670a1aa78 crtc/kms: Add parsing for IN_FORMATS property
The KMS IN_FORMATS blob property contains a structure defining which
format/modifier combinations are supported for each plane. Use this to
extract a list of acceptable modifiers to use for the primary plane for
XRGB8888, so we can ask EGL to allocate tiled/compressed buffers for
scanout when available.

https://bugzilla.gnome.org/show_bug.cgi?id=785779
2018-01-24 11:33:40 +08:00
Hans de Goede
76b396846d monitor: Set MINIMUM_LOGICAL_HEIGHT to 480
Using 800x600 as minimum logical size is very 4:3 thinking, while a lot of
modern devices are 16:9. The specific reason for this commit is to allow
1.5 scaling at mini-laptops (clamshell devices) with e.g. a 5.5"
1280x720 screen. Given that this device has a keyboard, one obviously
is not holding it very close to ones eyes and at 220 dpi that means the text
is too small at scale 1.0. For one real world example of such a device see:
https://en.wikipedia.org/wiki/GPD_Win

https://bugzilla.gnome.org/show_bug.cgi?id=792765
2018-01-23 11:07:04 +08:00
Kristjan SCHMIDT
bd0105ba8d Update Esperanto translation 2018-01-22 19:14:18 +00:00
Jeremy Nickurak
6dcce19932 Don't attempt to get monitor geometry on non-existent monitors
https://bugzilla.gnome.org/show_bug.cgi?id=788834
2018-01-21 14:41:48 +01:00
Piotr Drąg
cc40a885ef Update POTFILES.skip 2018-01-18 16:32:36 +01:00
Carlos Garnacho
513c278077 clutter: Make ClutterText request toggling the input panel
So gnome-shell is able to show the OSK for it.
2018-01-18 16:20:45 +01:00
Carlos Garnacho
ac8ee9a08c clutter: Add clutter_text_has_preedit()
This function returns TRUE if there is any preedit going on. This method
will be useful in gnome-shell where similar checks are performed on
StIMText actors.
2018-01-18 16:20:45 +01:00
Carlos Garnacho
952c1fefa2 clutter: Add input-purpose/hint properties to ClutterText
So those properties can be changed or queried within shell UI.
2018-01-18 16:20:45 +01:00
Carlos Garnacho
18b8f9bfed wayland: Bolt MetaWaylandTextInput in.
Offer the text-input interface global, so it can be used by clients. The
MetaWaylandSeat will also let MetaWaylandTextInput intercept key events
before the keyboard interface handles those.
2018-01-18 16:20:45 +01:00
Carlos Garnacho
f08417b618 wayland: Let IM-processed key events go through MetaWaylandKeyboard
Those have the "synthetic" flag as set by Clutter guts, but should be
processed anyway. Perhaps a "key-repeat" flat would make sense...
2018-01-18 16:20:45 +01:00
Carlos Garnacho
62c9713361 wayland: Implement text input protocol
This is the implementation of the internal text-input protocol that will
be used to communicate IMs (to be implemented by gnome-shell) with clients.
The text_input protocol has its own focus expressed through enter/leave
events, that will typically follow the keyboard's.

The client will be able to communicate its current status (eg. focus state,
cursor rectangle in surface coordinates, text surrounding the cursor
position, ...) and will receive commands from the compositor (eg. preedit
text, committing a string, ...).

Whenever there is an active input method, the compositor will route key
events directly through it. The client will not receive wl_keyboard
events if the event is consumed by the IM.
2018-01-18 16:20:45 +01:00
Carlos Garnacho
efd7a4af5e protocol: Add internal text input protocol
The text input protocol has been made internal thus far, so mutter ships an
internal copy.
2018-01-18 16:20:45 +01:00
Carlos Garnacho
3a914a915e clutter: Implement ClutterInputFocus subclass for ClutterText
This only applies when the actor is editable. This object will allow
editable ClutterText instances to interact with the input method.
2018-01-18 16:20:45 +01:00
Carlos Garnacho
aa6561a3b1 clutter: Add ClutterInputMethod and ClutterInputFocus
ClutterInputFocus is an abstract object to be subclassed by UI actors and
the wayland interface and represents the user of an input method. It
represents the current focus of the input method, so all emitted signals
and public API hooks are expected to be called when the input method is
currently interfacing with the input focus.

ClutterInputMethod is an abstract class (to be implemented in the upper
layers) that represents the input method itself. Besides focus management
itself, all public API calls that would be called by the subclasses are
delivered through the current input focus.
2018-01-18 15:35:29 +01:00
Carlos Garnacho
9eb9623288 clutter: Add ClutterBackend IM setter/getter
The input method will be global to Clutter and shared between all the
IM aware foci. These methods allow querying it and setting one up.
2018-01-18 15:33:12 +01:00
Carlos Garnacho
8c988aa632 clutter: Add special event flag for events that went through an IM
This will be useful to let Clutter know whether those should be or have
already been dispatched through an input method.
2018-01-18 15:33:12 +01:00
Olivier Fourdan
13cf19e0b6 wayland: shortcuts inhibitor requires a window
Issuing a shortcut inhibit request for a surface without a window set
will lead to a crash when trying to show the shortcut inhibitor dialog.

In such a case, it's safer to deny the request.

https://bugzilla.gnome.org/show_bug.cgi?id=792599
2018-01-18 14:08:13 +01:00
Carlos Garnacho
eac0e253e1 wayland: Add missing breaks on MetaWaylandSeat event handler
The events might fall through if there's no corresponding active
pointer/keyboard/touch interface. Barring bugs this should be safe to do,
just a bit wasteful.
2018-01-17 14:00:44 +01:00
Carlos Garnacho
7346419295 clutter/evdev: Ensure a valid ClutterEventSequence on single-touch devices
Libinput shall report those as having slot=-1, which gets mistakenly
translated into the special "NULL" ClutterEventSequence. Making those
events get a non-NULL sequence will make single touch devices work.

https://bugzilla.gnome.org/show_bug.cgi?id=792005
2018-01-17 00:22:22 +01:00
Olivier Fourdan
3e77f6704b wayland: send xdg-output size as size, not position
https://bugzilla.gnome.org/show_bug.cgi?id=792527
2018-01-15 10:41:01 +01:00
Jonas Ådahl
01e27a4366 input-settings/x11: Fix tap-and-drag libinput property name
It's "libinput Tapping Drag Enabled", not "libinput TappingDrag
Enabled".

https://bugzilla.gnome.org/show_bug.cgi?id=775755
2018-01-12 18:57:57 +08:00
Jonas Ådahl
4e3b26d2ed clutter/evdev: Ignore unknown touch points
We might receive touch events for unknown touch points, for example
when starting mutter while touching the screen (resulting in no
touch-down event ever being received). Avoid crashing when this happens
by just dropping these events on the floor.

https://bugzilla.gnome.org/show_bug.cgi?id=791371
2018-01-12 18:57:43 +08:00
Olivier Fourdan
5f05112b9a wayland: update location prior to maximize
When maximizing a window, the previous location is saved so that
un-maximize would restore the same original window location.

However, if a Wayland client starts with a window maximized, the
previous location will be 0x0, so if we have to force placement in
xdg_toplevel_set_maximized(), we should update the location as well so
that the window is placed on the right monitor when un-maximizing.

For that purpose, add a new flag to force the update of the window
location, and use that flag from xdg_toplevel_set_maximized().

https://bugzilla.gnome.org/show_bug.cgi?id=783901
2018-01-11 11:03:04 +01:00
Olivier Fourdan
6cf7d2d47f wayland: Do not enforce a size on un-maximize
When un-maximizing, use a zero size to pass to the client so that it can
use the right un-maximized size that fits.

https://bugzilla.gnome.org/show_bug.cgi?id=783901
2018-01-11 11:03:04 +01:00
Olivier Fourdan
1139ace244 core: Add new unmaximize flag
Wayland clients know their size better, so for Wayland we'd rather not
try to resize the client on un-maximize, but for this to work we need a
new MetaMoveResizeFlags.

https://bugzilla.gnome.org/show_bug.cgi?id=783901
2018-01-11 11:03:04 +01:00
Olivier Fourdan
bd9a300801 window: Defer stack placement without a buffer
When closing a window and showing a new one, the new one may not be
granted input focus until it gets a buffer on Wayland.

If another window is chosen to receive focus and raised on top of stack,
the newly mapped window is focused but placed underneath that other
window.

Meaning that for Wayland surfaces, we need to defer adding the window to
the stack until we actually get to show it, once we have a buffer
attached.

Rather that checking the windowing backend prior to decide if a window
is stackable or not, introduce a new vfunc is_stackable() which tells
if a window should be added to the stack regardless of the underlying
windowing system.

Also add meta_window_is_in_stack() API rather than checking the stack
position directly (replacing the define WINDOW_IN_STACK only available
in stack.c) and remove a window from the stack only if it is present
in the stack, so that the test in meta_stack_remote() becomes
irrelevant.

https://bugzilla.gnome.org/show_bug.cgi?id=780820
2018-01-11 11:03:04 +01:00
Fabio Tomat
2d090f9232 Update Friulian translation 2018-01-09 17:49:45 +00:00
Daniel van Vugt
1c8aebd811 wayland: Ensure wl_shell_surfaces are set reactive
Wayland clients using the wl_shell interface were never receiving mouse
input. It meant they also couldn't be raised with a click.

This was because the call to meta_wayland_surface_set_window for wl_shell
surfaces did nothing while surface->window == window already. As such, it
never called clutter_actor_set_reactive() and the wl_shell window remained
a non-reactive actor.

Just make sure surface->window isn't already set before calling
meta_wayland_surface_set_window so it can actually do what it's meant to.

https://bugzilla.gnome.org/show_bug.cgi?id=790309
2018-01-09 11:27:30 -05:00
Ting-Wei Lan
31eafba93a build: Fix build when native backend is disabled
https://bugzilla.gnome.org/show_bug.cgi?id=792281
2018-01-09 12:01:08 +08:00
Hans de Goede
5eacdf7af7 monitor-unit-tests: Add non upright panel test
https://bugzilla.gnome.org/show_bug.cgi?id=782294
2017-12-25 17:01:45 +08:00
Hans de Goede
ca638d1354 monitor-unit-tests: Add support for panel-orientation
https://bugzilla.gnome.org/show_bug.cgi?id=782294
2017-12-25 17:01:45 +08:00
Hans de Goede
f12e6ad4f1 monitor-config-manager: Adjust accelerometer rotation for panel-orientation
The device orientation coming out of iio-sensor-proxy defines upright/normal
as the direction in which the picture is displayed on the LCD panel without
any rotation. This is necessary for accelerometer rotation to work properly
in desktop environments which are not aware of panel-orientation issues.

This means that we need to correct the logical-monitor-config / user-visible
rotation for the panel-orientation when we get rotation info from
iio-sensor-proxy.

https://bugzilla.gnome.org/show_bug.cgi?id=782294
2017-12-25 17:01:45 +08:00
Hans de Goede
0bbda3ad87 monitor-manager: Take panel-orientation into account for physical size
Just like we swap the x and y resolution of the monitor modes when
the panel-orientation requires 90 or 270 degree rotation to compensate,
we should do the same for the width and height in mm of the monitor.

https://bugzilla.gnome.org/show_bug.cgi?id=782294
2017-12-25 17:01:45 +08:00
Hans de Goede
dd43d04d42 monitor-manager: Add portrait modes to portrait displays
If a monitor's max resolution is a portrait resolution, then assume it is
a native portrait monitor and add portrait versions of the common modes.

https://bugzilla.gnome.org/show_bug.cgi?id=782294
2017-12-25 17:01:45 +08:00
Hans de Goede
383ac76d00 cursor-renderer-native: Take panel-orientation into account
Even if the logical_monitor config does not have an active transform,
we might still be doing a transform under the hood to compensate for
panel-orientation. Check for this and fall back to the sw cursor if this
is the case.

https://bugzilla.gnome.org/show_bug.cgi?id=782294
2017-12-25 17:01:45 +08:00
Hans de Goede
e59ca14f6c monitor-manager: Take panel orientation into account when getting input matrix
If a LCD panel has a non normal orientation (mounted upside-down or 90
degrees rotated) then the kernel will report touchscreen coordinates with
the origin matching the native (e.g. upside down) coordinates of the panel.

Since we transparently rotate the image on the panel to correct for the
non normal panel-orientation, we must apply the same transform to input
coordinates to keep the aligned.

https://bugzilla.gnome.org/show_bug.cgi?id=782294
2017-12-25 17:01:45 +08:00
Hans de Goede
7917b083cb monitor-manager: Take drm-connector panel-orientation property into account
Some x86 clamshell design devices use portrait tablet LCD panels while
they should use a landscape panel, resoluting in a 90 degree rotated
picture.

Newer kernels detect this and rotate the fb console in software to
compensate. These kernels also export their knowledge of the LCD panel
orientation vs the casing in a "panel orientation" drm_connector property.

This commit adds support to mutter for reading the "panel orientation"
and transparently (from a mutter consumer's pov) fixing this by applying
a (hidden) rotation transform to compensate for the panel orientation.

Related: https://bugs.freedesktop.org/show_bug.cgi?id=94894

https://bugzilla.gnome.org/show_bug.cgi?id=782294
2017-12-25 17:01:45 +08:00
Hans de Goede
2b3040d04f monitor: s/meta_monitor_derived_derive_layout/meta_monitor_tiled_derive_layout/
Fix meta_monitor_derived_derive_layout typo.

https://bugzilla.gnome.org/show_bug.cgi?id=782294
2017-12-25 17:01:45 +08:00
Ting-Wei Lan
6cc48d8cbb build: Fix non-wayland builds
meta_dnd_wayland_handle_end_modal is not available on non-wayland build.

https://bugzilla.gnome.org/show_bug.cgi?id=791916
2017-12-24 17:55:14 +08:00
Carlos Garnacho
798026498d wayland: Only send full sequences of touch events to clients
If input happens to be grabbed somewhere along the shell, and ungrabbed
while a touch operation is ongoing, the wayland bits will happily start
sending wl_touch.update events from an undeterminate point, without
clients having ever received wl_touch.down for that id.

Consider those touches grabbed for the entirety of their lifetime, if
wl_touch.down wasn't received by the client, no other events will.

https://bugzilla.gnome.org/show_bug.cgi?id=776220
2017-12-21 12:37:20 +01:00
Olivier Fourdan
49f029571c keybindings: Super should be inhibitable
When a Wayland client issues a shortcut inhibit request which is granted
by the user, the Super key should be passed to the surface instead of
being handled by the compositor.

https://bugzilla.gnome.org/show_bug.cgi?id=790627
2017-12-21 09:08:41 +01:00
Daniel Mustieles
290b257288 Updated Spanish translation 2017-12-20 18:18:07 +01:00
Marco Trevisan (Treviño)
2b60fb0144 stage: Push framebuffer before setting up viewport
When capture_view* functions are called with the paint flag set
to TRUE, we need to setup the framebuffer, however this was
happening after setting up the viewport, while the viewport
needs the framebuffer to be valid when calling cogl_set_viewport.

https://bugzilla.gnome.org/show_bug.cgi?id=791809
2017-12-20 05:56:51 -05:00
Olivier Fourdan
7f5f5eb847 wayland/keyboard: preserve layout index
On VT switch, the xkb state layout index is lost and reset to the first
group, so if the first layout is not the last one being used, the xkb
state used in both meta-wayland-keyboard.c and clutter/evdev will be
desynchronized with the keyboard source indicator in the gnome-shell UI.

Save the effective layout chosen along with the seat so it can be
restored when reclaiming devices.

Use the saved layout index from the clutter/evdev's seat to restore the
layout in meta-wayland-keyboard, so that switching VT doesn't reset the
layout and causes further discrepancies with the layout indicator in the
gnome-shell UI.

https://bugzilla.gnome.org/show_bug.cgi?id=791383
2017-12-20 09:56:34 +01:00
Jonas Ådahl
44269e6a1d keybindings: Only add multiple keycodes from the same level
The reason why multiple keycodes could be mapped to a single keysym was
to support having both KEY_FAVORITES and KEY_BOOKMARK map to
XF86Favorites. However, iterating through all layout levels adding all
key codes has severe consequences on layouts with levels that map
things like numbers and arrow. The result is that keybindings that
should only have been added for keycodes from the first level, are
replaced by some unexpected keycode where the same keysym was found on
another level.

An example of this is the up-arrow key and l symbol. Normally you'd find
both the up-arrow symbol and the l symbol on the first level and be done
with it. However, on the German Neo-2 layout, layout level 4 maps the
KEY_E to the l symbol, while layout level 4 maps KEY_E to up-arrow.
Which ever gets to take priority is arbitrary, but for this particular
case KEY_E incorrectly mapped to up-arrow instead of the l symbol,
causing the keyboard shortcut Super+l, which would normally lock the
screen, to trigger the workspace-up (Super+up-arrow) key binding.

https://bugzilla.gnome.org/show_bug.cgi?id=789300
2017-12-20 15:02:39 +08:00
Piotr Drąg
70dfe8c97d Use Unicode quotation marks in new translatable strings
See https://developer.gnome.org/hig/stable/typography.html

https://bugzilla.gnome.org/show_bug.cgi?id=772218
2017-12-18 17:22:36 +01:00
Olivier Fourdan
072afa5fa3 wayland: Add Xwayland grab keyboard support
This protocol is limited to Xwayland only and is not visible/usable by
any other client.

Mutter uses the following mechanisms to determine if an X11 client
should be granted a grab:

 - is "xwayland-allow-grabs" set?
 - if set, is the client blacklisted?
 - otherwise, has the client set the X11 window property
   _XWAYLAND_MAY_GRAB_KEYBOARD on the window using a client message?
 - if not, is it a client white-listed either via the default system
   list or the settings "xwayland-grab-access-rules"?

https://bugzilla.gnome.org/show_bug.cgi?id=783342
2017-12-18 13:15:20 +01:00
Olivier Fourdan
519a0fd93d settings: Add xwayland grab settings
Add new settings to control which X11 windows are allowed to
issue Xwayland grabs.

https://bugzilla.gnome.org/show_bug.cgi?id=783342
2017-12-18 13:15:17 +01:00
Olivier Fourdan
5f132f3975 xwayland: add _XWAYLAND_MAY_GRAB_KEYBOARD property
Add a new client message "_XWAYLAND_MAY_GRAB_KEYBOARD" that X11 clients
can use to tell mutter this is a well behaving X11 client so it may
grant the keyboard grabs when requested.

An X11 client wishing to be granted Xwayland grabs by gnome-shell/mutter
must send a ClientMessage to the root window with:

 - message_type set to "_XWAYLAND_MAY_GRAB_KEYBOARD"
 - window set to the xid of the window on which the grab is to be issued
 - data.l[0] to a non-zero value

Note: Sending this client message when running a plain native X11
environment would have no effect.

https://bugzilla.gnome.org/show_bug.cgi?id=783342
2017-12-18 13:15:13 +01:00
Olivier Fourdan
1546989845 xwayland: Add MetaWindowXwayland
MetaWindowXwayland derives from MetaWindowX11 to allow for some Xwayland
specific vfunc that wouldn't apply to plain X11 windows, such as
shortcut inhibit routines.

https://bugzilla.gnome.org/show_bug.cgi?id=783342
2017-12-18 13:15:09 +01:00
Rui Matos
1923db97c1 wayland-outputs: Delay wl_output destruction
This tries to avoid wayland clients getting disconnected for binding
to a wl_output that we already destroyed which is a known protocol
race condition, see https://phabricator.freedesktop.org/T7722 .

https://bugzilla.gnome.org/show_bug.cgi?id=789070
2017-12-15 14:54:13 +01:00
Olivier Fourdan
db32047a5d wayland: Add xdg-output support
The xdg-output protocol aims at describing outputs in way which is
more in line with the concept of an output on desktop oriented systems.

For now it just features the position and logical size which describe
the output position and size in the global compositor space.

This is however much useful for Xwayland to advertise the output size
and position to X11 clients which need this to configure their surfaces
in the global compositor space as the compositor may apply a different
scale from what is advertised by the output scaling property (to achieve
fractional scaling, for example).

This was added in wayland-protocols 1.10.

https://bugzilla.gnome.org/show_bug.cgi?id=787363
2017-12-15 14:18:14 +01:00
Kukuh Syafaat
b505eb261e Update Indonesian translation 2017-12-03 08:19:53 +00:00
Marco Trevisan (Treviño)
1a1db9ef8d window-actor: rename destroy function in queue_destroy
Since this might delay the destruction after animation
has succeeded, it's just better to rename this accordingly.

https://bugzilla.gnome.org/show_bug.cgi?id=791006
2017-11-30 22:53:26 -05:00
Marco Trevisan (Treviño)
b1587f0716 compositor: reset top_window_actor and remove it from windows when destroyed
When the top window actor is destroyed, we need to make sure that
all its references are removed or it could be picked again in next
windows sync, causing crashes.
Since the window might or might not be destroyed when removed (depending
weather animations are in progress over it or not), it's just safer
to wait it to be destroyed before cleaning up any of its reference.

https://bugzilla.gnome.org/show_bug.cgi?id=791006
2017-11-30 22:53:26 -05:00
Philip Withnall
93e450f37c backends: Fix ClutterRect initialisations
With Clang, these initialisations were warning about missing brackets.

Signed-off-by: Philip Withnall <withnall@endlessm.com>

https://bugzilla.gnome.org/show_bug.cgi?id=791022
2017-11-30 13:06:13 +00:00
Jonas Ådahl
fc713ecb70 monitor-unit-tests: Check config loading on lid switches
Check that we apply the correct stored configuration when the lid is
opend and closed while an external monitor is connected.

https://bugzilla.gnome.org/show_bug.cgi?id=788915
2017-11-30 11:48:44 +08:00
Jonas Ådahl
500c13ab6f monitor-unit-tests: Always reset CRTC transform ability
Changing the test monitor managers ability to rotate CRTCs in one test
affected the next test. Avoid leaking such state by resetting it before
each test. To continue passing, some tests needed to be updated
regarding to still pass.

https://bugzilla.gnome.org/show_bug.cgi?id=788915
2017-11-30 11:48:44 +08:00
Jonas Ådahl
050267fe74 monitor-unit-tests: Add test for lid toggle after hot unplug
https://bugzilla.gnome.org/show_bug.cgi?id=788915
2017-11-30 11:48:44 +08:00
Jonas Ådahl
ce25a0171c monitor-unit-tests: Add test for lid closed after hot plug
Add a test case that checks that we don't try to revert to a
laptop-panel-only configuration after closing the lid after an external
monitor is connected.

https://bugzilla.gnome.org/show_bug.cgi?id=788915
2017-11-30 11:48:44 +08:00
Jonas Ådahl
b7518c8651 monitor-manager: Compare keys when checking whether a config is complete
We only counted configured monitors and whether the config was
applicable (could be assigned), howeverwe didn't include disabled
monitors when comparing. This could caused incorrect configurations to
be applied when trying to use the previous configuration.

One scenario where this happened was one a system with one laptop
screen and one external monitor that was hot plugged some point after
start up. When the laptop lid was closed, the 'previous configuration'
being the configuration where only the laptop panel was enabled, passed
'is-complete' check as the number of configured monitors were correct,
and the configuration was applicable.

Avoid this issue by simply comparing the configuration key of the
previous configuration and the configuration key of the current state.
This correctly identifies a laptop panel with the lid closed as
inaccessible, thus doesn't incorrectly revert to the previous
configuration.

https://bugzilla.gnome.org/show_bug.cgi?id=788915
2017-11-30 11:48:44 +08:00
Jonas Ådahl
62dedfbef3 monitor-config-manager: Don't include closed laptop panel in config key
When deriving the list of disabled monitors when creating new monitors
configs, don't include the laptop panel if the lid is currently closed,
as we consider the laptop panel nonexistent when the laptop lid is
closed when it comes to configuration.

The laptop panel connector(s) will either way be appropriately disabled
anyway, as the field listing disabled monitors in the configuration do
not affect actual CRTC/connector assignments.

https://bugzilla.gnome.org/show_bug.cgi?id=788915
2017-11-30 11:48:44 +08:00
Jonas Ådahl
4508978ea5 wayland/xdg-shell: Dismiss a popup on map if parent already dismissed
If a parent doesn't have a window, it means it could have been
dismissed (for example due to a input serial race), but the more recent
popup might win the input serial race and try to map anyway. This would
result in a crash later on when trying to process the placement rule,
as the parent already has no window.

https://bugzilla.gnome.org/show_bug.cgi?id=790358
2017-11-30 10:50:13 +08:00
Jonas Ådahl
c533a06e93 wayland/xdg-shell: Check popup parent type when assigning
We only allow mapping popups on top of surfaces with a xdg_surface
based role. Add a check and fail clients that doesn't follow this rule.

https://bugzilla.gnome.org/show_bug.cgi?id=790358
2017-11-30 10:50:13 +08:00
Jonas Ådahl
5d3b4f0134 wayland/xdg-shell: Fix top-most check when grabbing
Move the top-most-popup correctness check to the finish_popup_setup()
function after checking the serial. If we pass the serial check, we
should have reached a state that if there are any popups they should be
the one from the same client.

Also avoid failing a client that correctly set the top-most popup at map
time, but where at the time of processing the top most popup have
already been dismissed by the compositor for some arbitrary reason.

https://bugzilla.gnome.org/show_bug.cgi?id=790358
2017-11-30 10:50:13 +08:00
Yosef Or Boczko
4cf340ae9b Updated Hebrew translation 2017-11-26 17:15:03 +02:00
Pawan Chitrakar
053ac03f01 Update Nepali translation
(cherry picked from commit 789d740add)
2017-11-26 05:19:55 +00:00
Rui Matos
28a9439209 monitor-manager: Refuse to activate closed laptop panels
There's no good reason to allow this and it allows g-c-c to properly
show that such a configuration doesn't work.

https://bugzilla.gnome.org/show_bug.cgi?id=790336
2017-11-22 15:07:11 +01:00
Carlos Garnacho
cf4b5efdd1 backends: Do NULL checks before disconnecting/connecting signals
The displayed cursor may be NULL.

https://bugzilla.gnome.org/show_bug.cgi?id=754806
2017-11-20 13:29:22 +01:00
Carlos Garnacho
3067dab84c backends: Do not set up the root cursor on invisible window pointers
Commit b1a0bf891 broke the previous logic that we would only fallback
to the root cursor if 1) windows are not interactable or 2) no window
cursor is currently set (i.e. not hovering over any window). Now it
will set up the root cursor if it's NULL, which breaks clients
explicitly setting an invisible cursor. This commit restaurates the
previous behavior.

https://bugzilla.gnome.org/show_bug.cgi?id=754806
2017-11-20 13:29:22 +01:00
Carlos Garnacho
1790320ba3 backends: Protect from reentrancy in meta_cursor_sprite_load_from_theme
This function is supposedly not failable, so just move the theme_dirty
flag clearing to the beginning of the function. Protects against cases
where requesting a cursor image may result in it being loaded and set
as a texture, which emits ::texture-changed, which may end up requesting
the cursor image again.

https://bugzilla.gnome.org/show_bug.cgi?id=754806
2017-11-17 17:22:18 +01:00
Carlos Garnacho
f45df4265d backends: Trigger MetaCursorTracker::cursor-changed on texture changes
So we allow gnome-shell's magnifier to update fake cursors while it's
turned on.

https://bugzilla.gnome.org/show_bug.cgi?id=754806
2017-11-17 17:22:18 +01:00
Carlos Garnacho
bcbcd6a68c backends: Add MetaCursorSprite::texture-changed signal
As wayland implements the cursor role, it consists of a persistent
MetaCursorSprite that gets the backing texture changed. This is
inconvenient for the places using MetaCursorTracker to track cursor
changes, as they actually track MetaCursorSprites.

This signal will be used to trigger emission of
MetaCursorTracker::cursor-changed, which will make users able to
update accordingly.

https://bugzilla.gnome.org/show_bug.cgi?id=754806
2017-11-17 17:22:18 +01:00
Carlos Garnacho
b1a0bf8916 backends: Dissociate visibility from current cursor sprite
Just like X11/XFixes behaves, the current cursor is not affected
by its visibility, so it can be queried while invisible (possibly
to be replaced).

For this, keep an extra effective_cursor pointer that will be
either equal to displayed_cursor (maybe a bit of a misnomer now)
or NULL if the cursor is invisible. The MetaCursorRenderer
management is tied to the former, and the ::cursor-changed signal
emission to the latter.

https://bugzilla.gnome.org/show_bug.cgi?id=754806
2017-11-17 17:22:18 +01:00
Carlos Garnacho
6c18bae83c compositor: Fix build
Unused variable definition. The fixup didn't make it to the previous
commit.
2017-11-17 16:58:54 +01:00
Carlos Garnacho
d0531966eb compositor: End MetaDnd grab on plugin grab end
We must emit ::dnd-leave to pair the ::dnd-enter that shall be
emitted whenever the plugin grab begins, otherwise we leave
listeners unable to clean up if the plugin begins and ends a
grab while there is an ongoing DnD operation.

https://bugzilla.gnome.org/show_bug.cgi?id=784545
2017-11-17 14:43:50 +01:00
Milo Casagrande
989a47ee8c Update Italian translation
(cherry picked from commit 32a151094d)
2017-11-17 13:31:22 +00:00
Olivier Fourdan
03be6b687b clutter/x11: Configure XKB accessibility
Configure XKB accessibility features from the x11 and xi2 clutter input
device managers, offloading this feature from gnome-settings-daemon.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
32c22d375a clutter/x11: Add xkb accessibility helpers
Adds a set of convenient functions that can be shared between x11 input
device backends (namely core-x11 and xi2) to control XKB accessibility
features.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
bdf3f49a82 clutter/evdev: implement mouse keys support
Control the pointer using the numeric keypad.

When enabled, creates a virtual pointer and emulate the pointer event
based on keyboard events.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
356b4b0dc5 clutter/evdev: implement toggle keys support
Keeping Shift pressed for 8 seconds enables slow keys, pressing Shift 5
times in a row enables sticky keys.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
3fc2ea8297 wayland/keyboard: Apply sticky keys masks
MetaWaylandKeyboard maintains its own xkb_state used to update Wayland
clients.

Add the necessary hooks to make sure the sticky keys modifier masks set
in clutter-evdev are also applied in MetaWaylandKeyboard's xkb_state so
that Wayland clients also benefit from sticky keys.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
06d976e853 clutter/evdev: implement sticky keys support
One key press on a modifier latches it, two consecutive presses lock it.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
96ebd1c214 clutter/evdev: implement bounce keys support
Ignore multiple consecutive identical key presses within a time frame.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
fa28481736 clutter/evdev: implement slow keys support
Delay emitting clutter key press events when slow key is enabled.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
76b064cffc clutter/evdev: Implement a11y configuration hooks
Apply the keyboard accessibility settings to the master keyboard.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
333b5d12a0 backends: configure keyboard accessibility
Set the relevant flags and values for keyboard accessibility from
gsettings.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
aa73504d95 clutter: add keyboard accessibility signals
Implementing keyboard accessibility in clutter means we need to be able
to notify higher layers of possible modifier masks or setting changes
(as some keyboard accessibility can be disabled or enabled by keyboard).

For this purpose, add two new signals:

   ClutterDeviceManager::kbd-a11y-mods-state-changed
   ClutterDeviceManager::kbd-a11y-flags-changed

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
32305b453d clutter: add hooks for kbd a11y configuration
Use a set of bitwise enum flags to set different keyboard accessibility
features and the necessary vfunc hooks in clutter input device so that
keyboard preferences can be passed to different input device
implementations.

The idea is to be able to configure either the clutter own
implementation of keyboard accessibility for evdev, or eventually
configure AccessX from the X11 clutter input device using the same
mechanism.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
7d5e08c843 clutter-main: Add hooks to plug kbd accessibility
On X11, when AccessX is enabled, all X11 clients benefit from the
AccessX features, including gnome-shell/mutter, meaning that special
keys like the overview or other shortcuts are also affected.

To achieve the same in Wayland, we need to implement the same features
in clutter main rather than the Wayland backend, so that all depending
code within the compositor but also Wayland clients (which rely on the
compositor to get keyboard events) similarly benefit from the
accessibility features.

Add hooks to the clutter main loop to be able to implement such
features.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
dc0fc65229 backend/native: implement bell-notify
https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
428af6d213 backend/x11: implement bell-notify
https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
2ffe597617 clutter/backend: Add bell-notify
We'll need a way to trigger a bell from within clutter for keyboard
accessibility features, add the necessary hooks to be able to call a
backend bell-notify method.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Olivier Fourdan
0461eed0cb wayland: Disable AccessX in Xwayland
Keyboard accessibility features in Wayland are handled in the
compositor, we do not want AccessX in Xwayland to interfere with the
compositor.

https://bugzilla.gnome.org/show_bug.cgi?id=788564
2017-11-16 14:14:31 +01:00
Muhammet Kara
ca1bacc212 Update Turkish translation
(cherry picked from commit 8c45fbfb58)
2017-11-15 20:50:32 +00:00
Marek Cernocky
2229365ca8 Updated Czech translation 2017-11-15 13:35:31 +01:00
Charles Monzat
8c367364b6 Update French translation
(cherry picked from commit 6797be5e1e)
2017-11-14 08:11:50 +00:00
Anders Jonsson
58909da425 Update Swedish translation
(cherry picked from commit f4b4ef32ed)
2017-11-13 23:44:31 +00:00
Christian Kirbach
ff32bf467c Update German translation
(cherry picked from commit cdfeecc318)
2017-11-11 21:20:20 +00:00
Rafael Fontenelle
c5572d3095 Update Brazilian Portuguese translation
(cherry picked from commit 19cde75acc)
2017-11-11 18:57:12 +00:00
Kjartan Maraas
e706bcdf73 Updated Norwegian bokmål translation. 2017-11-11 18:19:24 +01:00
Piotr Drąg
d9ebcbd55c Update Polish translation 2017-11-10 19:30:56 +01:00
Piotr Drąg
240b13aa74 Update POTFILES.in 2017-11-10 19:16:27 +01:00
Olivier Fourdan
97635d6f84 Add restore-shortcuts to key bindings list
gnome-control-center uses this to list the keybindings, without this
users cannot change the default key combo to restore shortcuts.

https://bugzilla.gnome.org/show_bug.cgi?id=789386
2017-11-10 17:59:26 +01:00
Olivier Fourdan
6c21a22e4d wayland: Use Super+Escape to re-enable shortcuts
Change the default key combo to re-enable normal keyboard shortcuts
processing while a shortcut inhibitor is in effect to Super+Escape as
primary system modifier key should be Super.

This should reduce the risk of potential conflict with other shortcuts.

https://bugzilla.gnome.org/show_bug.cgi?id=789386
2017-11-10 17:58:00 +01:00
Jonas Ådahl
0add6f62b6 window/wayland: Handle resizing when headless
We tried to get the geometry scale, which may depend on the main
logical monitor assigned to the window. To avoid dereferencing a NULL
logical monitor when headless, instead assume the geometry scale is 1.

https://bugzilla.gnome.org/show_bug.cgi?id=788764
2017-11-10 10:24:10 +08:00
memeka
049418cd03 renderer/native: Also allow EGL_KHR_platform_gbm extension string
Proprietary drivers such as ARM Mali export EGL_KHR_platform_gbm instead
of EGL_MESA_platform_gbm. As such, GBM platform check should be done for
both MESA and non-MESA drivers.

https://bugzilla.gnome.org/show_bug.cgi?id=780668
2017-11-09 18:16:27 +08:00
Benoit Gschwind
3ee1999c70 backend: Reset current device id when current device removed
Bluetooth mouse usually goes in sleep state after a timeout, when that
happen the mouse is disconnected and on_device_removed function is
called. Before the patch if a touch device is available the
on_device_removed function hide the cursor. The issue is that the cursor
does not reappear once the bluetooth mouse is reconnected because
MetaBackend::current_device_id is not invalidated when on_device_removed
was called.

The patch set MetaBackend::current_device_id to 0 if the current device
is removed. This will make update_last_device to be triggered as soon as
another input device is used or the bluetooth mouse reconnect, as
consequence that the cursor reappear. The id 0 is never given to devices
and can safely used as undefine id.

https://bugzilla.gnome.org/show_bug.cgi?id=761067
2017-11-09 17:42:45 +08:00
Kjartan Maraas
e4b8920688 Updated Norwegian bokmål translation. 2017-11-08 20:15:37 +01:00
Carlos Garnacho
eb236649fc backends: Plug leaks
The DRM properties container must be destroyed with
drmModeFreeObjectProperties, and the connectors must be freed on every
caller. Also make it sure that gbm_device structs are destroyed with the
MetaRendererNativeGpuData that owns them.

https://bugzilla.gnome.org/show_bug.cgi?id=789984
2017-11-07 11:02:00 +01:00
Carlos Garnacho
0a36a4545f core: Plug leaks
The MetaWorkspaceLogicalMonitorData structs are leaked, and so is the
stamps hashtable in MetaDisplay.

https://bugzilla.gnome.org/show_bug.cgi?id=789984
2017-11-07 10:48:45 +01:00
Carlos Garnacho
180985018b wayland: Plug leak
The remote DBus error is leaked.

https://bugzilla.gnome.org/show_bug.cgi?id=789984
2017-11-07 10:48:45 +01:00
Carlos Garnacho
c86c5d6905 clutter: Plug evdev ClutterDeviceManager leaks
The unused ID GList element is leaked, and so is the node path.

https://bugzilla.gnome.org/show_bug.cgi?id=789984
2017-11-06 20:51:58 +01:00
Carlos Garnacho
c2fad2dc7c compositor: Keep reference to the screen on the MetaBackground
This is not a leak per se, but it seems too easy to make valgrind
SIGSEGV due to MetaBackground disconnecting signals from an already
destroyed MetaScreen when trying to SIGTERM gnome-shell. Keeping a
reference fixes this.

https://bugzilla.gnome.org/show_bug.cgi?id=789984
2017-11-06 20:51:58 +01:00
Kjartan Maraas
1196b7bde4 Updated Norwegian bokmål translation. 2017-11-06 13:43:25 +01:00
Marc-Antoine Perennou
19eddfd756 build-sys: allow explicitely disabling remote-desktop and egl-device
https://bugzilla.gnome.org/show_bug.cgi?id=789958

Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
2017-11-06 10:57:33 +01:00
Khaled Hosny
ed280ef4ac Update Arabic translation 2017-11-03 10:23:14 +02:00
Jonas Ådahl
b6200ac3ff wayland/keyboard: Don't transfer layout group when replacing xkb state
The layout group determines what actual keyboard layout in the keymap
to use when translating modifier state and key codes to key syms.
When changing a keymap to another, the layout groups has no relation to
the layout groups in the old keymap, thus there is no reason to
transfer it to the new state.

This fixes an issue where the xkb state in meta-wayland-keyboard.c got
desynchronized with the xkb state in clutter-device-manager-evdev.c.

https://bugzilla.gnome.org/show_bug.cgi?id=789300
2017-11-02 12:10:10 +08:00
Jonas Ådahl
626621a53a renderer-native-gles3: Add cpp error if gl.h was included
On some architectures, including both GLES3/gl3.h GL/gl.h will cause
compilation issues due to incompatible type definitions. To avoid
running into that issue while building on other architectures, make
sure we haven't included GL/gl.h by accident.

https://bugzilla.gnome.org/show_bug.cgi?id=788695
2017-10-30 19:52:42 +08:00
Jonas Ådahl
fb3a64491e renderer-native-gles3: Remove unnecessary includes
They caused conflicts on i686 as GL/gl.h was included by cogl.

https://bugzilla.gnome.org/show_bug.cgi?id=788695
2017-10-30 19:52:42 +08:00
Jonas Ådahl
294f9419f7 renderer-native-gles3: Don't pass GPU when rendering
It wasn't used for anything, so don't pass it.

https://bugzilla.gnome.org/show_bug.cgi?id=788695
2017-10-30 19:52:42 +08:00
Daniel van Vugt
a37956c95f eglnative: Use gnome-settings-daemon font settings
While the X11 backend gets its font settings from XSettings, the native
backend did not use any user font preferences till now. So all shell fonts
were rendered with grayscale un-hinted, which some people describe as
"blurry text in Wayland sessions".

Although it's somewhat confusing using the "xsettings" schema on eglnative,
this is consistent with what GTK does already for its Wayland backend. It
is also documented here:

https://wiki.gnome.org/Initiatives/Wayland/GTK%2B#XSettings
https://wiki.gnome.org/Initiatives/Wayland/gnome-settings-daemon#xsettings

No more blurry shell text in Wayland sessions.

https://bugzilla.gnome.org/show_bug.cgi?id=645433
2017-10-27 22:12:57 -05:00
Carlos Garnacho
89f5ca3301 backends: Unref variants obtained from g_variant_iter_get_next_value()
Those are being leaked.

https://bugzilla.gnome.org/show_bug.cgi?id=789553
2017-10-27 13:22:12 +02:00
Jonas Ådahl
07745b3082 wayland/surface: Disconnect actor handlers before unassigning role
The handlers depend on a role being assigned. Destroying the window
causes it to become unmapped, which would sometimes trigger one of the
handlers, resulting in an is-assigned assert hitting in one of the
handlers. Avoid this by disconnecting the handlers earlier, so that
there is no risk that any them being triggered before the role is
assigned.

https://bugzilla.gnome.org/show_bug.cgi?id=789552
2017-10-27 19:08:38 +08:00
Daniel van Vugt
054c25f693 wayland: Allow Xwayland to leave core dumps
For historical Xorg-reasons, Xwayland would disable its own core dumps by
default. This is a problem because Xwayland crashing is the biggest cause of
gnome-shell crashes [1][2], and we still have no idea why due to there being
no dumps from Xwayland. So enable core dumping from Xwayland.

https://bugzilla.gnome.org/show_bug.cgi?id=789086

[1] https://bugs.launchpad.net/bugs/1505409
[2] https://bugs.launchpad.net/bugs/1556601
2017-10-26 19:50:40 -05:00
Carlos Garnacho
01de04d8c9 wayland: Update pointer confinement on surface actor relocations
In the unlikely case that a surface is moved by the compositor while
holding a pointer confinement, we also need to update the pointer
position when the surface actor gets moved.

https://bugzilla.gnome.org/show_bug.cgi?id=782344
2017-10-26 12:53:20 +02:00
Carlos Garnacho
08e4cb54a8 wayland: Trigger wl_output updates on actor position changes
Both notify::position on the surface actor and position-changed on
MetaWindow are listened to, in order to trigger wl_output updates for
wl_surfaces whenever the surfaces move across them.

Both signals are necessary in order to cater for toplevel and subsurface
relocations (Because it's the parent window actor what changes position
in this last case).

Also, shuffle signal disconnection, so each signal goes away with
the object reference held by MetaWaylandSurface.

https://bugzilla.gnome.org/show_bug.cgi?id=782344
2017-10-26 12:51:44 +02:00
Carlos Garnacho
c71faffb71 backends/native: Fix handling of trackball settings
The org.gnome.desktop.peripherals.trackball.scroll-wheel-emulation-button
setting contains buttons X11-style. Work out the BTN evcode that applies
to it when applying the setting on the libinput device.

https://bugzilla.gnome.org/show_bug.cgi?id=787804
2017-10-26 12:48:15 +02:00
Marco Trevisan (Treviño)
91e3a0b3a9 MetaWindowActor: assert that we have plugin manager on simple effect
It looks that there are some extensions that run a Mainloop on startup,
causing to dispatch a clutter paint before the compositor is even available.
In such scenario a MetaWindow could try to start a simple effect
using a compositor plugin which is not there yet.

Then in order to catch these bugs we can now assert that the expected
conditions are valid, so that gnome-shell will provide a dumpstack to
debug the real offending JS code.

https://bugzilla.gnome.org/show_bug.cgi?id=789223
2017-10-24 04:42:54 -05:00
Jeremy Bicha
5fa8f78434 Revert "tests: Fix actor-anchors test"
This reverts commit dd451547a5.

since we reverted commit 5cb5baa with commit 4d2647c
2017-10-21 18:58:37 -04:00
Marco Trevisan (Treviño)
ab5ac21104 window: rename get_flatpack_id into get_sandboxed_app_id
This function can be more generic now.

https://bugzilla.gnome.org/show_bug.cgi?id=789277
2017-10-21 13:36:16 -05:00
Marco Trevisan (Treviño)
0ebea2be9c Revert "MetaWindowActor: don't start any effect when no compositor is available"
This reverts commit 35fcf4a4ae.
2017-10-20 03:25:31 -05:00
Marco Trevisan (Treviño)
6f54bab0a8 Revert "MetaPluginManager: don't try to deference a NULL pointer when processing events"
This reverts commit 74565380aa.
2017-10-20 03:23:28 -05:00
Marco Trevisan (Treviño)
5d7deab6da Revert "display: trap X errors in get_current_time_roundtrip"
This reverts commit cc772ddd61.
2017-10-20 03:22:59 -05:00
Marco Trevisan (Treviño)
35fcf4a4ae MetaWindowActor: don't start any effect when no compositor is available
There are cases when no compositor is available (yet) but a MetaWindow tries
to start a simple effect using a compositor plugin which is not available.
In that case we should just ignore any request and protect ourselves from
crashes.

https://bugzilla.gnome.org/show_bug.cgi?id=789223
2017-10-20 16:10:18 +08:00
Marco Trevisan (Treviño)
74565380aa MetaPluginManager: don't try to deference a NULL pointer when processing events
This function might be called by components with invalid plugin manager
(as it might happen to MetaWindow when the compositor isn't initialized
properly), so we need to protect ourselves from crashes.

https://bugzilla.gnome.org/show_bug.cgi?id=789223
2017-10-20 16:10:18 +08:00
Marco Trevisan (Treviño)
fa37496ffb MetaLogicalMonitor: free the monitors list on finalize
https://bugzilla.gnome.org/show_bug.cgi?id=789227
2017-10-20 16:10:18 +08:00
Marco Trevisan (Treviño)
cc772ddd61 display: trap X errors in get_current_time_roundtrip
Only return the actual timestamp if we get one.

https://bugzilla.gnome.org/show_bug.cgi?id=788971
2017-10-20 16:10:18 +08:00
Michael Catanzaro
4d2647cdbc Revert "ClutterActor: Optimize away idempotent scale/position updates"
This reverts commit 5cb5baa7d4.

There's a cascade of regressions that needs to be sorted out before
relanding this:

https://bugzilla.gnome.org/show_bug.cgi?id=784314
2017-10-19 19:54:24 -05:00
Rui Matos
3caefd8fda compositor: Avoid a crash if the top window actor is finalized
Since we're not holding a reference, the top window actor might be
finalized when we paint resulting in a use after free crash.

https://bugzilla.gnome.org/show_bug.cgi?id=788493
2017-10-19 18:37:34 +02:00
Jonas Ådahl
12381d57d1 monitor-unit-tests: Check non-first preferred modes
Check that if there are multiple modes with the same ID (resolution,
refresh rate and handled flags) we correctly add the preferred mode to
the list of monitor modes.

https://bugzilla.gnome.org/show_bug.cgi?id=789153
2017-10-19 10:17:14 +08:00
Jonas Ådahl
4ad8c4b86b monitor/normal: Prefer modes with same flags as preferred mode
When generating MetaMonitorMode's, prefer CRTC modes that has the same
set of flags as the preferred mode. This not only is probably a better
set of configurable modes, but it'll guarantee that the preferred mode
is added.

This fixes a crash when the preferred mode was not the first mode with
the same resolution, refresh rate and set of handled modes.

https://bugzilla.gnome.org/show_bug.cgi?id=789153
2017-10-19 10:16:50 +08:00
Florian Müllner
dbd2827ca1 Bump version to 3.27.1
Update NEWS.
2017-10-17 17:44:39 +02:00
Jonas Ådahl
1a78557e0b monitor-manager/xrandr: Use a single supported scales list for all
Under X11 we can only ever have the same scale configured on all
monitors. In order to use e.g. scale 2 when there is a HiDPI monitor
connected, we must not disallow it because there is a monitor that does
not support scale 2. Thus we must show the same scale for every monitor
and monitor mode, even though it might result in a bad experience.

Do this by iterating through all the monitors adding all supported
scales by the preferred mode, combining all the supported scales. This
supported scales list is then used for all monitor and modes no matter
what.

https://bugzilla.gnome.org/show_bug.cgi?id=788901
2017-10-17 15:21:12 +08:00
Jonas Ådahl
2e99963087 compositor: Ignore offscreen windows when unredirecting
When determining whether we should unredirect a window or not, ignore
offscreen windows, and just check the top most visible window.

Previously this was not an issue, but since 'stack-tracker: Keep
override redirect windows on top' we started sorting the UI frames
window, which is an offscreen override redirect window, on top, causing
the unredirect checking code to always check whether to unredirect the
UI frames window. This effectively disabled the compositor bypass
functionality.

https://bugzilla.gnome.org/show_bug.cgi?id=788493
2017-10-17 14:50:18 +08:00
Rui Matos
4d763e1828 x11/window: Don't manage InputOnly windows
This was dropped by mistake in commit
f166240225.

https://bugzilla.gnome.org/show_bug.cgi?id=788493
2017-10-17 14:50:18 +08:00
Jonas Ådahl
a17b343c21 monitor-manager/xrandr: Chain up constructed vfunc
'monitor-manager: Keep pointer to backend' added a
GObjectClass::constructed implementation, but didn't chain it up to the
parent. Fix that.

https://bugzilla.gnome.org/show_bug.cgi?id=788921
2017-10-16 17:13:55 +08:00
Marco Trevisan (Treviño)
556136dacc workspace: ensure that workarea data is valid when fetching by monitor num
https://bugzilla.gnome.org/show_bug.cgi?id=788860
2017-10-13 00:46:51 -05:00
Marco Trevisan (Treviño)
a8c80ccece backend: move the cursor render update on screen changes here
https://bugzilla.gnome.org/show_bug.cgi?id=788860
2017-10-13 00:46:51 -05:00
Marco Trevisan (Treviño)
f044511037 monitor-manager: use g_return_val_if_fail if trying to fetch an invalid monitor
https://bugzilla.gnome.org/show_bug.cgi?id=788860
2017-10-13 13:43:03 +08:00
Marco Trevisan (Treviño)
b31e545c9d backends: add 'monitors-updated-internal' signal to only update internal state
Adding an internal signal and use it to update the internal state before
emitting "monitors-changed" which will be repeated by the screen to the world.

https://bugzilla.gnome.org/show_bug.cgi?id=788860
2017-10-13 00:42:50 -05:00
Jonas Ådahl
fad5657eda DisplayConfig: Add 'legacy-ui-scaling-factor' property
We have this value in mutter; lets share it so that for example
gnome-settings-daemon doesn't have to calculate it itself.

https://bugzilla.gnome.org/show_bug.cgi?id=788820
2017-10-12 17:42:52 +08:00
Jonas Ådahl
eaf9ccde39 settings: Get UI scaling factor from primary logical monitor
Don't use MAX(logical monitor scales) to determine the UI scaling
factor, just use the primary logical monitor. That's where the shell UI
will most likely be.

https://bugzilla.gnome.org/show_bug.cgi?id=788820
2017-10-12 17:42:52 +08:00
polygamma
f9c625924e x11: Protect XChangeProperty call with error traps
They may happen around the time a window is destroyed, thus could result
on BadWindow X errors.

https://bugzilla.gnome.org/show_bug.cgi?id=788666
2017-10-10 13:55:40 +02:00
Carlos Garnacho
64cb735abf configure: Explicitly require gl pkgconfig file
Mutter now does direct calls to GL, so we should add the requirement to
it. Fixes underlinking when generating Meta-1.gir.
2017-10-09 13:41:41 +02:00
Carlos Garnacho
c85f322b20 backends/native: Move functions out of HAVE_EGL_DEVICE
Those are now used in common code, so should be taken out of
the ifdef. Fixes compilation without EGL streams.
2017-10-09 13:39:50 +02:00
Jonas Ådahl
76096a725b monitor-unit-tests: Check going headless -> headless
https://bugzilla.gnome.org/show_bug.cgi?id=788607
2017-10-07 00:36:03 -04:00
Jonas Ådahl
6eb7d13894 window: Handle updating from no to no monitor
When we received two hot plug events that both resulted in headless
configuration, we tried to find a new window monitor given the old.
That resulted in a null pointer dereference; avoid that by only trying
to find the same monitor if there was an old one.

https://bugzilla.gnome.org/show_bug.cgi?id=788607
2017-10-07 00:36:03 -04:00
Jonas Ådahl
7928b25ebf renderer/native: Use g_initable_new() to create renderer
No need to do g_object_new then g_initable_init while tracking the
lifetime when g_initable_new() can do it for us.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-06 13:18:12 -04:00
Jonas Ådahl
78e6258b44 cursor-renderer-native: Support HW cursors on multiple GPUs
On hybrid GPU systems, hardware cursors needs to be realized on all the
GPUs, as scanout cursor planes cannot be shared. Do this by moving gbm
buffer and drm buffer ID management to a per GPU struct, realizing a
cursor on each GPU when previously only realized on the primary GPU.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-06 13:18:12 -04:00
Jonas Ådahl
c9259c2b15 renderer-native: Add hybrid GPU system support
A hybrid GPU system is a system where more than one GPU is connected to
connectors. A common configuration is having a integrated GPU (iGPU)
connected to a laptop panel, and a dedicated GPU (dGPU) connected to
one or more external connector (such as HDMI).

This commit adds support for rendering the compositor stage using the
iGPU, then copying the framebuffer content onto a secondary framebuffer
that will be page flipped on the CRTC of the dGPU.

This can work in two different ways: GPU accelerated using Open GL ES
3, or CPU unaccelerated.

When supported, GPU accelerated copying works by exporting the iGPU
onscreen framebuffer as a DMA-BUF, importing it as a texture on a
separate dGPU EGL context, then using glBlitFramebuffer(), blitting it
onto a framebuffer on the dGPU that can then be page flipped on the dGPU
CRTC.

When GPU acceleration is not available, copying works by creating two
dumb buffers, and each frame glReadPixels() from the iGPU EGL render
context directly into the dumb buffer. The dumb buffer is then page
flipped on the dGPU CRTC.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-06 13:18:12 -04:00
Jonas Ådahl
492d2eb573 renderer-native: Move some error reporting up the call stack
Pass GErrors to functions that can fail, and report the error att the
call site.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:17:26 -04:00
Jonas Ådahl
376dcd3b92 gpu-kms: Pass GPU on page flip callbacks
https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:17:26 -04:00
Jonas Ådahl
60781bc6c2 backends: Add OpenGL ES 3 abstraction layer
Add helper functions and macros for managing and drawing OpenGL ES 3.
It will be used for blitting framebuffers between multiple GPUs in
hybrid GPU systems.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:17:26 -04:00
Jonas Ådahl
2d8827cb0c egl: Add more API used when rendering
Eventually, we'll render buffers without using Cogl, and for this we
need to be able to do things like creating, destroying and changing the
context, as well as swapping buffers.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:17:26 -04:00
Jonas Ådahl
802f7dcd30 monitor: Add meta_monitor_get_gpu()
Add API to get what GPU drives this monitor.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:17:26 -04:00
Jonas Ådahl
e62cfd9043 egl: Expose eglGetProcAddress
It will be needed for OpenGL ES extension function symbol loading.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:17:26 -04:00
Jonas Ådahl
cbcf6a4f23 monitor-manager-kms: Add all GPUs with connectors
First find the primary GPU and open it. Then go through all other
discovered GPUs with connectors and add those too. MetaRendererNative
still fails to initialize when multiple added GPUs and
MetaCursorRendererNative still always falls back on OpenGL based cursor
rendering when there are multiple GPUs.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:17:26 -04:00
Jonas Ådahl
b0e42d3f6e renderer-native: Always use MetaEgl when interacting with EGL
Partly for consistency, partly for error handling functionality.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:17:25 -04:00
Jonas Ådahl
18eb66de06 cogl: Add way to pass user data when setting custom renderer winsys
When creating a renderer with a custom winsys (which is always how
mutter uses cogl) make it possible to pass a user data with the winsys.
Still unused.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:10:30 -04:00
Jonas Ådahl
b32cccddf9 egl: Expose .._has_extensions_..() function
It will be used by e.g. a future GLES helper unit needing similar
functionality.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:10:30 -04:00
Jonas Ådahl
362e26b3e2 renderer-native: Add MetaEgl getter from renderer
https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:10:30 -04:00
Jonas Ådahl
5c53284bde renderer-native: Turn dumb buffer into a simple type
Make dumb buffer creation/destruction reusable by introducing a
MetaDumbBuffer type (private to meta-renderer-native.c). This will
later be used for software based fallback paths for copying render GPU
buffers onto secondary GPUs.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:10:27 -04:00
Jonas Ådahl
e45d7f70e8 crtc-kms: Don't set normal transform when no transforms are supported
On a CRTC that doesn't report any transforms at all, setting the normal
transform will fail. Avoid failing by checking if any transforms are
supported before applying it, and early out if no transforms are
supported.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:08:09 -04:00
Jonas Ådahl
70edc7dda4 backends/native: Stop supporting stage views being disabled
Get rid of some technical dept by removing the support in the native
backend for drawing the the whole stage to one large framebuffer.
Previously the only way to disable stage views was to set the
MUTTER_STAGE_VIEWS environment variable to 0; doing that now will cause
the native backend to fail to initialize.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:08:09 -04:00
Jonas Ådahl
3244ed37a9 cursor-rendere-native: Don't declare HW cursors broken on EACCES
Don't permanently fall back to OpenGL based cursor rendering when
setting the HW cursor fails with EACCES as that may happen on VT
switching and other things temporarily revoking fd access.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:08:09 -04:00
Jonas Ådahl
406359bba1 gpu-kms: poll() on KMS fd on EAGAIN
When drmHandleEvent() returns an error and errno is set to EAGAIN,
instead of ending up in a busy loop, poll() the fd until there is
anything to read.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:08:09 -04:00
Jonas Ådahl
8b23dd915f cursor-renderer-native: Don't leak cursor gbm buffers
We tried to free all three cursors by looping, but only ever tried to
free the first buffer.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:08:09 -04:00
Jonas Ådahl
7e1f65405f native/renderer: More naming cleanups
The prefix, if any, of a variable name often contains information about
the namespace (such as clutter_backend is the ClutterBackend, while
backend is a MetaBackend). Clean up some more inconsistencies in
meta-renderer-native.c where various variable names were egl_ prefixed
but in fact was Cogl types.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:08:08 -04:00
Jonas Ådahl
c1683073f1 backends: Split out CRTC/output management to MetaGpu
In order to eventually support multilpe GPUs with their own connectors,
split out related meta data management (i.e. outputs, CRTCs and CRTC
modes) into a new MetaGpu GObject.

The Xrandr backend always assumes there is always only a single "GPU" as
the GPU is abstracted by the X server; only the native backend (aside
from the test backend) will eventually see more than one GPU.

The Xrandr backend still moves some management to MetaGpuXrandr, in
order to behave more similarly to the KMS counterparts.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 18:05:20 -04:00
Jonas Ådahl
18ec86bd90 Remove meta_monitor_manager_get_monitor_for_output() API
This function is replaced by an equivalent that takes a connector
string.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
315a6f43d7 monitor-manager: Keep pointer to backend
Instead of accessing the global singleton, keep a pointer to the
backend in the MetaMonitorManager struct.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
7603bb5fd5 monitor-manager-dummy: Use GObject type declaration macro
Use G_DECLARE_FINAL_TYPE instead of old multiple macro definitions way.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
d53b79f8c3 native/cursor-renderer: Cleanup construction
Pass the backend to a new factory function, and keep a pointer to the
monitor manager, which is accessed elsewhere in the same file instead of
fetching the singleton. The HW cursor initialization part is also made
more obvious, without depending on seemingly irrelevant clutter
features.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
f534452c6a cursor-renderer-native: Remove unused functions and declarations
https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
0f6b83e7df cursor-renderer-native: Cleanup type declaration
Use G_DECLARE_FINAL_TYPE instead of the old macros.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
16a6aef5a7 backends/native: Move KMS fd management to monitor manager
Move finding, opening and managment of the KMS file descriptor to
MetaMonitorManagerKms. This means that the monitor manager creation can
now fail, both if more than one GPU with connectors is discovered, or
if finding or opening the primary GPU fails.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
518fb9fb5e backends: Split monitor manager creation into create and setup
The monitor manager instance was created and setup in one step; at
construction. This is problematic if, in the future, the monitor manager
creation can fail, as the monitor manager is created quite late.

To make it possible to in the future fail creating a monitor manager,
create the instance very early when initiating the backend, then on
post init backend setup, "setup" the monitor manager state, i.e. read
the current state and setup the stage.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
547ace3cf8 backend/native: Propogate error when creating renderer
The error was printed, then dropped, eventually resulting in another
generic error being printed. Lets just propogate the error all the way
up instead.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
a4ba38ee78 backends/x11: Move CRTC code to its own file
Move code dealing with Xrandr MetaCrtcs and related functionality to its
own file. Eventually, MetaCrtcCrtc should be introduced, based on
MetaCrtc, and this commit is in preparation for that.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
e32d52b9b8 backends/x11: Move output code to its own file
Move code dealing with X11 MetaOutputs and related functionality to its
own file. Eventually, a MetaOutputXrandr should be introduced, based on
MetaOutput, and this commit is in preparation for that.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
de40ced8b4 backends/native: Move CRTC code to its own file
Move code dealing with MetaCrtcKms and related functionality to its
own file. Eventually, MetaCrtcKms should become a GObject based on
MetaCrtc, and this commit is in preparation for that.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
cfee58798e backends/crtc: Keep a pointer to the monitor manager
Instead of passing it around or fetching the singleton, keep a pointer
to the monitor manager that owns the CRTC. This will eventually be
replaced with a per GPU/graphics card object.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
7ea01693a7 backends/native: Move output code to its own file
Move code dealing with MetaOutputKms and related functionality to its
own file. Eventually, MetaOutputKms should become a GObject based on
MetaOutput, and this commit is in preparation for that.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
e0d839aea2 backends/output: Keep a pointer to the monitor manager
Instead of passing it around or fetching the singleton, keep a pointer
to the monitor manager that owns the output. This will eventually be
replaced with a per GPU/graphics card object.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
d3efd73429 monitor-manager-kms: Use G_DECLARE_FINAL_TYPE macro
Declare the MetaMonitorManagerKms type using the helper macro, instead
of manually.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
2db5505216 monitor-manager: Turn MetaCrtcMode into a GObject
Convert MetaCrtcMode from a plain struct to a GObject. This changes the
storage format, and also the API, as the API was dependent on the
storage format.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
f44b6c772a monitor-manager/kms: Some naming fixes
Prefix external types (e.g mode -> drm_mode) and rename a search
function to not refer to a local type as ".._meta_..".

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
f64fab1d2d monitor-manager: Make MetaCrtc a GObject
Turn MetaCrtc into a GObject and move it to a separate file. This
changes the storage format, resulting in changing the API for accessing
MetaCrtcs from using an array, to using a GList.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
39bc2e0333 monitor-manager/dummy: Define tile count instead of using array length
Explicitly define the tile count (2) and use this instead of the
crtc_decl array length.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
5bb6f0ad8b renderer/native: Use helper to iterate over logical monitor CRTCs
Don't iterate over all the CRTCs and check the CRTC logical monitor
state, but use the new MetaLogicalMonitor helper instead.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
903537a2a0 logical-monitor: Add helper for iterating over active CRTCs
Add meta_logical_monitor_foreach_crtc() helper to iterate over all the
active CRTCs driving the monitors associated with the specified logical
monitor.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
1db937826c monitor-manager/xrandr: Fix crtc variable naming
The variable name of the local type (MetaCrtc) should not be prefixed,
while the external one should be.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
c1fe1c5d6b window-actor: Use monitor API to get frame message refresh rate
Use the MetaMonitor API instead of accessing outputs directly to get
the refresh rate used when genaritng the frame message.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
a62e9f99a2 backends: Remave unused meta_monitor_manager_get_resources() API 2017-10-05 16:18:43 -04:00
Jonas Ådahl
9817a6aa47 Make MetaOutput a GObject
Turn MetaOutput into a GObject and move it to a separate file. This
changes the storage format, resulting in changing the API for accessing
MetaOutputs from using an array, to using a GList.

https://bugzilla.gnome.org/show_bug.cgi?id=785381
2017-10-05 16:18:43 -04:00
Jonas Ådahl
8185373bd4 screen-cast-stream-src: Only clean up pipewire remote/core if they exist
They can could fail to create, so lets deal better with that
possibility.

https://bugzilla.gnome.org/show_bug.cgi?id=788569
2017-10-05 16:15:48 -04:00
Florian Müllner
18c41aefc9 build: Fetch pipewire micro version
Pipewire doesn't export its version defines, so the API checks added
in commit f0c6c4eb1f effectively disable screencasting, whoops.
Breaking changes like this should disappear once the library stabilizes,
so simply define the version ourselves instead of writing a "proper"
test with AC_COMPILE_IFELSE() ...

https://bugzilla.gnome.org/show_bug.cgi?id=788572
2017-10-05 22:11:14 +02:00
Daniel Stone
32917f1922 wayland-dma-buf: Don't send modifiers to old clients
The modifier event was only added in v3 of the client; sending it to
older clients (e.g. GStreamer waylandsink) causes them to disconnect
immediately.

Send the older 'format' event to all clients, and only send the newer
'modifier' event to resource versions 3 or above.

https://bugzilla.gnome.org/show_bug.cgi?id=788558
2017-10-05 10:51:06 -04:00
Xavi Ivars
7a843e1fd1 [l10n] Updated Catalan (Valencian) translation 2017-10-05 14:15:49 +02:00
375 changed files with 39251 additions and 21894 deletions

13
.gitignore vendored
View File

@@ -88,6 +88,19 @@ src/pointer-constraints-unstable-v*-protocol.c
src/pointer-constraints-unstable-v*-server-protocol.h src/pointer-constraints-unstable-v*-server-protocol.h
src/xdg-foreign-unstable-v*-protocol.c src/xdg-foreign-unstable-v*-protocol.c
src/xdg-foreign-unstable-v*-server-protocol.h src/xdg-foreign-unstable-v*-server-protocol.h
src/xdg-output-unstable-v1-protocol.c
src/xdg-output-unstable-v1-server-protocol.h
src/xwayland-keyboard-grab-unstable-v1-protocol.c
src/xwayland-keyboard-grab-unstable-v1-server-protocol.h
src/tablet-unstable-v*-protocol.c
src/tablet-unstable-v*-server-protocol.h
src/keyboard-shortcuts-inhibit-unstable-v*-protocol.c
src/keyboard-shortcuts-inhibit-unstable-v*-server-protocol.h
src/linux-dmabuf-unstable-v*-protocol.c
src/linux-dmabuf-unstable-v*-server-protocol.h
src/xdg-shell-protocol.c
src/xdg-shell-server-protocol.h
src/wayland-eglstream-controller-server-protocol.h
src/meta/meta-version.h src/meta/meta-version.h
src/libmutter-*.pc src/libmutter-*.pc
doc/reference/*.args doc/reference/*.args

151
NEWS
View File

@@ -1,3 +1,154 @@
3.29.3
======
* Fix Korean Hangul support on wayland [Changwoo; #152]
* Improve support for proprietary Nvidia driver [Jonas; #790316]
* Only upload HW cursor sprite to the GPU that will display them [Jonas; #77]
* nvidia [Miguel; #2]
* nvidia [Miguel; #782575]
* Remove MetaScreen to prepare for non-mandatary X11 dependency
[Armin, Jonas; #759538]
* Misc. bug fixes [Olivier, Jonas, Sam; #160, !130, #786929, #788834]
Contributors:
Jonas Ådahl, Olivier Fourdan, Carlos Garnacho, Armin Krezović, Corentin Noël,
Changwoo Ryu, Sam Spilsbury, Daniel Stone, Marco Trevisan (Treviño),
Miguel A. Vico, Daniel van Vugt
Translators:
Yi-Jyun Pan [zh_TW], Jordi Mas [ca], Daniel Șerbănescu [ro], Fabio Tomat [fur]
3.29.2
======
* Fix size change animations on wayland [Georges; #780292]
* Handle touch events on server-side titlebars [Carlos; #770185]
* Misc. bug fixes [Florian, Olivier, Jonas, Georges; #134, #124, !96, #138,
!102, #781471, #150]
Contributors:
Jonas Ådahl, Olivier Fourdan, Carlos Garnacho, Florian Müllner,
Georges Basile Stavracas Neto, Marco Trevisan (Treviño), Daniel van Vugt
Translators:
Daniel Șerbănescu [ro], Marcos Lans [gl], Dz Chen [zh_CN]
3.29.1
======
* Fix various input-method regressions [Carlos, Olivier; #65, #74, #66, #112]
* Fix wayland build on FreeBSD [Ting-Wei; #792280, #792717]
* Fix swapped colors in screenshots (again) [Carlos; #72]
* Allow building with elogind [Rasmus; !46]
* Consider display rotation for cursor [Olivier; #85]
* Fall back to non-modifier GBM surfaces [Daniel; #84]
* Take inhibitors into account for monitoring idle [Bastien; #705942]
* Misc. bug fixes [handsome-feng, Olivier, Mario, Jonas; !45, #83, #104,
gnome-shell#157, #130, #21]
Contributors:
Jonas Ådahl, Olivier Fourdan, Carlos Garnacho, handsome-feng, Yussuf Khalil,
Ting-Wei Lan, Aleksandr Mezin, Alberts Muktupāvels,
Georges Basile Stavracas Neto, Bastien Nocera, Benjamin Otte,
Mario Sanchez Prada, Daniel Stone, Ray Strode, Rasmus Thomsen,
Marco Trevisan (Treviño), Daniel van Vugt
Translators:
Emin Tufan Çetin [tr], Dušan Kazik [sk], Matej Urbančič [sl]
3.28.0
======
* Fix xdg-foreign regression [Carlos; #63]
Contributors:
Carlos Garnacho, Georges Basile Stavracas Neto
Translators:
Marek Cernocky [cs], Ask Hjorth Larsen [da], Chao-Hsiung Liao [zh_TW],
Anders Jonsson [sv], Mart Raudsepp [et]
3.27.92
=======
* Fix use of modifiers with multi-GPU systems [Louis-Francis; #18]
* Add xdg-shell stable support [Jonas; #791938]
* Fix scaling of icons in titlebar buttons [Egmont; #23]
* Implement missing wacom functionality on X11 [Carlos; #48]
* Force 8-bit RGB config [Jonas; #2]
* Misc. bug fixes [Jonas, Olivier, Robert; #6, #27, #792203]
Contributors:
Jonas Ådahl, Olivier Fourdan, Carlos Garnacho, Egmont Koblinger, Robert Mader,
Bastien Nocera, Louis-Francis Ratté-Boulianne
Translators:
Daniel Mustieles [es], Марко Костић [sr], Милош Поповић [sr@latin],
Fran Dieguez [gl], Balázs Úr [hu], Gwan-gyeong Mun [ko], Rūdolfs Mazurs [lv],
Milo Casagrande [it], Mario Blättermann [de], GNOME Translation Robot [gd,
nl], Claude Paroz [fr], Aurimas Černius [lt]
3.27.91
=======
* Fix handling of trackball settings on wayland [Carlos; #787804]
* Apply font settings on wayland [Daniel; #645433]
* Fix keybindings getting mixed up with some layouts [Jonas; #789300]
* Fix bluetooth mouse cursor disappearing after idle [Benoit; #761067]
* Support platforms that export EGL_KHR_platform_gbm [memeka; #780668]
* Add keyboard accessibility support on wayland [Olivier; #788564]
* Fix missing cursor when using screen magnifier [Carlos; #754806]
* Fix external monitor shutting off on wayland when lid closes [Jonas; #788915]
* Add xdg-output support [Olivier; #787363]
* Add Xwayland grab keyboard support [Olivier; #783342]
* Allow shortcut inhibition of the super key [Olivier; #790627]
* Take "panel orientation" drm_connector property into account [Hans; #782294]
* Fix focus window ending up below other windows on wayland [Olivier; #780820]
* Fix maximized windows restoring to a tiny size on wayland [Olivier; #783901]
* Fix tap-and-drag setting on X11 [Jonas; #775755]
* Fix handling of single-touch devices on wayland [Carlos; #792005]
* Support tiled/compressed buffers [Daniel; #785779]
* Port screencast support to pipewire 0.1.8 [Jonas; #792854]
* Add support for third stylus button on newer tablets [Jason; #790033]
* Fix background corruption regression on nvidia [Jonas; #739178]
* Misc. bug fixes [Jonas, Rui, Michael, Marco, Carlos, Olivier, Philip, Piotr,
Ting-Wei, Daniel, Jeremy, Hans, Florian, Ray, Jeff, George, Gwan-gyeong;
#789153, #788493, #784314, #789227, #789223, #789277, #782344, #789552,
#789553, #788695, #789984, #788764, #789386, #784545, #790336, #790358,
#791022, #791006, #789070, #772218, #791383, #791809, #776220, #791916,
#792281, #790309, #791371, #792527, #792599, #788834, #792765, #792062,
#645460, #792853, !2, #792818, #8, #12, #789501, #10, #789961, #13, !15, #1,
#26, #28, #35, #36, #38]
Contributors:
Jonas Ådahl, Jeremy Bicha, Michael Catanzaro, Piotr Drąg, Olivier Fourdan,
Carlos Garnacho, Jason Gerecke, Hans de Goede, Benoit Gschwind,
Peter Hutterer, George Kiagiadakis, Ting-Wei Lan, Rui Matos, memeka,
Florian Müllner, Gwan-gyeong Mun, Jeremy Nickurak, Marc-Antoine Perennou,
Jeff Smith, Daniel Stone, Ray Strode, Marco Trevisan (Treviño),
Daniel van Vugt, Philip Withnall
Translators:
Khaled Hosny [ar], Kjartan Maraas [nb], Piotr Drąg [pl],
Rafael Fontenelle [pt_BR], Christian Kirbach [de], Anders Jonsson [sv],
Charles Monzat [fr], Marek Cernocky [cs], Muhammet Kara [tr],
Milo Casagrande [it], Pawan Chitrakar [ne], Yosef Or Boczko [he],
Kukuh Syafaat [id], Daniel Mustieles [es], Fabio Tomat [fur],
Kristjan SCHMIDT [eo], Balázs Úr [hu], Andika Triwidada [id],
Fran Dieguez [gl], gogo [hr]
3.27.1
======
* Work with clients that require older linux_dmabuf protocol [Daniel; #788558]
* Support hybrid GPU systems [Jonas; #785381]
* Prevent crash when closing maximized windows [Jonni; #788666]
* Use the correct monitor for HiDPI scaling of shell chrome [Jonas; #788820]
* Fix unredirection of fullscreen windows [Rui, Jonas; #788493]
* Fix list of supported monitor scales on X11 [Jonas; #788901]
* Misc. bug fixes [Florian, Jonas, Marco; #788572, #788569, #788607, #788860,
#788921]
Contributors:
Jonas Ådahl, Carlos Garnacho, Rui Matos, Florian Müllner, Daniel Stone,
Marco Trevisan, Jonni Westphalen
Translations:
Xavi Ivars [ca@valencia]
3.26.1 3.26.1
====== ======
* Fix crash when respawning shortcut inhibitor dialog [Olivier; #787568] * Fix crash when respawning shortcut inhibitor dialog [Olivier; #787568]

View File

@@ -87,6 +87,8 @@ source_h = \
clutter-image.h \ clutter-image.h \
clutter-input-device.h \ clutter-input-device.h \
clutter-input-device-tool.h \ clutter-input-device-tool.h \
clutter-input-focus.h \
clutter-input-method.h \
clutter-interval.h \ clutter-interval.h \
clutter-keyframe-transition.h \ clutter-keyframe-transition.h \
clutter-keysyms.h \ clutter-keysyms.h \
@@ -169,6 +171,8 @@ source_c = \
clutter-image.c \ clutter-image.c \
clutter-input-device.c \ clutter-input-device.c \
clutter-input-device-tool.c \ clutter-input-device-tool.c \
clutter-input-focus.c \
clutter-input-method.c \
clutter-virtual-input-device.c \ clutter-virtual-input-device.c \
clutter-interval.c \ clutter-interval.c \
clutter-keyframe-transition.c \ clutter-keyframe-transition.c \
@@ -229,6 +233,8 @@ source_h_priv = \
clutter-flatten-effect.h \ clutter-flatten-effect.h \
clutter-gesture-action-private.h \ clutter-gesture-action-private.h \
clutter-id-pool.h \ clutter-id-pool.h \
clutter-input-focus-private.h \
clutter-input-method-private.h \
clutter-master-clock.h \ clutter-master-clock.h \
clutter-master-clock-default.h \ clutter-master-clock-default.h \
clutter-offscreen-effect-private.h \ clutter-offscreen-effect-private.h \
@@ -388,6 +394,7 @@ x11_source_c = \
x11/clutter-keymap-x11.c \ x11/clutter-keymap-x11.c \
x11/clutter-stage-x11.c \ x11/clutter-stage-x11.c \
x11/clutter-x11-texture-pixmap.c \ x11/clutter-x11-texture-pixmap.c \
x11/clutter-xkb-a11y-x11.c \
$(NULL) $(NULL)
x11_source_h = \ x11_source_h = \
@@ -402,6 +409,7 @@ x11_source_h_priv = \
x11/clutter-keymap-x11.h \ x11/clutter-keymap-x11.h \
x11/clutter-settings-x11.h \ x11/clutter-settings-x11.h \
x11/clutter-stage-x11.h \ x11/clutter-stage-x11.h \
x11/clutter-xkb-a11y-x11.h \
$(NULL) $(NULL)
x11_source_c_priv = \ x11_source_c_priv = \
@@ -684,7 +692,7 @@ Cally_@LIBMUTTER_API_VERSION@_gir_CFLAGS = $(AM_CPPFLAGS) $(CLUTTER_CFLAGS)
Cally_@LIBMUTTER_API_VERSION@_gir_SCANNERFLAGS = \ Cally_@LIBMUTTER_API_VERSION@_gir_SCANNERFLAGS = \
--warn-all \ --warn-all \
--c-include='cally/cally.h' \ --c-include='cally/cally.h' \
--pkg-export=mutter-cally-@LIBMUTTER_API_VERSION@ \ --pkg-export=mutter-clutter-@LIBMUTTER_API_VERSION@ \
--include-uninstalled=$(top_builddir)/clutter/Clutter-@LIBMUTTER_API_VERSION@.gir --include-uninstalled=$(top_builddir)/clutter/Clutter-@LIBMUTTER_API_VERSION@.gir
INTROSPECTION_GIRS += Cally-@LIBMUTTER_API_VERSION@.gir INTROSPECTION_GIRS += Cally-@LIBMUTTER_API_VERSION@.gir

View File

@@ -214,6 +214,8 @@ cally_util_simulate_snooper_install (void)
G_CALLBACK (cally_util_stage_added_cb), cally_key_snooper); G_CALLBACK (cally_util_stage_added_cb), cally_key_snooper);
g_signal_connect (G_OBJECT (stage_manager), "stage-removed", g_signal_connect (G_OBJECT (stage_manager), "stage-removed",
G_CALLBACK (cally_util_stage_removed_cb), cally_key_snooper); G_CALLBACK (cally_util_stage_removed_cb), cally_key_snooper);
g_slist_free (stage_list);
} }
static void static void

View File

@@ -840,6 +840,7 @@ struct _ClutterActorPrivate
guint needs_compute_expand : 1; guint needs_compute_expand : 1;
guint needs_x_expand : 1; guint needs_x_expand : 1;
guint needs_y_expand : 1; guint needs_y_expand : 1;
guint needs_paint_volume_update : 1;
}; };
enum enum
@@ -1504,6 +1505,8 @@ clutter_actor_real_map (ClutterActor *self)
CLUTTER_ACTOR_SET_FLAGS (self, CLUTTER_ACTOR_MAPPED); CLUTTER_ACTOR_SET_FLAGS (self, CLUTTER_ACTOR_MAPPED);
self->priv->needs_paint_volume_update = TRUE;
stage = _clutter_actor_get_stage_internal (self); stage = _clutter_actor_get_stage_internal (self);
priv->pick_id = _clutter_stage_acquire_pick_id (CLUTTER_STAGE (stage), self); priv->pick_id = _clutter_stage_acquire_pick_id (CLUTTER_STAGE (stage), self);
@@ -2737,6 +2740,7 @@ clutter_actor_real_queue_relayout (ClutterActor *self)
priv->needs_width_request = TRUE; priv->needs_width_request = TRUE;
priv->needs_height_request = TRUE; priv->needs_height_request = TRUE;
priv->needs_allocation = TRUE; priv->needs_allocation = TRUE;
priv->needs_paint_volume_update = TRUE;
/* reset the cached size requests */ /* reset the cached size requests */
memset (priv->width_requests, 0, memset (priv->width_requests, 0,
@@ -2821,7 +2825,7 @@ _clutter_actor_fully_transform_vertices (ClutterActor *self,
/* Note: we pass NULL as the ancestor because we don't just want the modelview /* Note: we pass NULL as the ancestor because we don't just want the modelview
* that gets us to stage coordinates, we want to go all the way to eye * that gets us to stage coordinates, we want to go all the way to eye
* coordinates */ * coordinates */
_clutter_actor_apply_relative_transformation_matrix (self, NULL, &modelview); _clutter_actor_get_relative_transformation_matrix (self, NULL, &modelview);
/* Fetch the projection and viewport */ /* Fetch the projection and viewport */
_clutter_stage_get_projection_matrix (CLUTTER_STAGE (stage), &projection); _clutter_stage_get_projection_matrix (CLUTTER_STAGE (stage), &projection);
@@ -4828,8 +4832,7 @@ clutter_actor_set_scale_factor (ClutterActor *self,
g_assert (pspec != NULL); g_assert (pspec != NULL);
g_assert (scale_p != NULL); g_assert (scale_p != NULL);
if (*scale_p != factor) _clutter_actor_create_transition (self, pspec, *scale_p, factor);
_clutter_actor_create_transition (self, pspec, *scale_p, factor);
} }
static inline void static inline void
@@ -8519,6 +8522,7 @@ clutter_actor_init (ClutterActor *self)
priv->needs_width_request = TRUE; priv->needs_width_request = TRUE;
priv->needs_height_request = TRUE; priv->needs_height_request = TRUE;
priv->needs_allocation = TRUE; priv->needs_allocation = TRUE;
priv->needs_paint_volume_update = TRUE;
priv->cached_width_age = 1; priv->cached_width_age = 1;
priv->cached_height_age = 1; priv->cached_height_age = 1;
@@ -10085,6 +10089,9 @@ clutter_actor_allocate (ClutterActor *self,
return; return;
} }
if (CLUTTER_ACTOR_IS_MAPPED (self))
self->priv->needs_paint_volume_update = TRUE;
if (!stage_allocation_changed) if (!stage_allocation_changed)
{ {
/* If the actor didn't move but needs_allocation is set, we just /* If the actor didn't move but needs_allocation is set, we just
@@ -10264,10 +10271,9 @@ clutter_actor_set_position (ClutterActor *self,
cur_position.x = clutter_actor_get_x (self); cur_position.x = clutter_actor_get_x (self);
cur_position.y = clutter_actor_get_y (self); cur_position.y = clutter_actor_get_y (self);
if (!clutter_point_equals (&cur_position, &new_position)) _clutter_actor_create_transition (self, obj_props[PROP_POSITION],
_clutter_actor_create_transition (self, obj_props[PROP_POSITION], &cur_position,
&cur_position, &new_position);
&new_position);
} }
/** /**
@@ -12974,6 +12980,9 @@ clutter_actor_add_child_internal (ClutterActor *self,
child->priv->needs_height_request = TRUE; child->priv->needs_height_request = TRUE;
child->priv->needs_allocation = TRUE; child->priv->needs_allocation = TRUE;
if (CLUTTER_ACTOR_IS_MAPPED (child))
child->priv->needs_paint_volume_update = TRUE;
/* we only queue a relayout here, because any possible /* we only queue a relayout here, because any possible
* redraw has already been queued either by show() or * redraw has already been queued either by show() or
* by our call to queue_redraw() above * by our call to queue_redraw() above
@@ -17516,11 +17525,16 @@ _clutter_actor_get_paint_volume_mutable (ClutterActor *self)
priv = self->priv; priv = self->priv;
if (priv->paint_volume_valid) if (priv->paint_volume_valid)
clutter_paint_volume_free (&priv->paint_volume); {
if (!priv->needs_paint_volume_update)
return &priv->paint_volume;
clutter_paint_volume_free (&priv->paint_volume);
}
if (_clutter_actor_get_paint_volume_real (self, &priv->paint_volume)) if (_clutter_actor_get_paint_volume_real (self, &priv->paint_volume))
{ {
priv->paint_volume_valid = TRUE; priv->paint_volume_valid = TRUE;
priv->needs_paint_volume_update = FALSE;
return &priv->paint_volume; return &priv->paint_volume;
} }
else else

View File

@@ -58,6 +58,8 @@ struct _ClutterBackend
gint32 units_serial; gint32 units_serial;
GList *event_translators; GList *event_translators;
ClutterInputMethod *input_method;
}; };
struct _ClutterBackendClass struct _ClutterBackendClass
@@ -100,6 +102,8 @@ struct _ClutterBackendClass
PangoDirection (* get_keymap_direction) (ClutterBackend *backend); PangoDirection (* get_keymap_direction) (ClutterBackend *backend);
void (* bell_notify) (ClutterBackend *backend);
/* signals */ /* signals */
void (* resolution_changed) (ClutterBackend *backend); void (* resolution_changed) (ClutterBackend *backend);
void (* font_changed) (ClutterBackend *backend); void (* font_changed) (ClutterBackend *backend);

View File

@@ -127,6 +127,7 @@ clutter_backend_finalize (GObject *gobject)
g_free (backend->font_name); g_free (backend->font_name);
clutter_backend_set_font_options (backend, NULL); clutter_backend_set_font_options (backend, NULL);
g_clear_object (&backend->input_method);
G_OBJECT_CLASS (clutter_backend_parent_class)->finalize (gobject); G_OBJECT_CLASS (clutter_backend_parent_class)->finalize (gobject);
} }
@@ -1363,3 +1364,41 @@ clutter_set_allowed_drivers (const char *drivers)
allowed_drivers = g_strdup (drivers); allowed_drivers = g_strdup (drivers);
} }
void
clutter_backend_bell_notify (ClutterBackend *backend)
{
ClutterBackendClass *klass;
klass = CLUTTER_BACKEND_GET_CLASS (backend);
if (klass->bell_notify)
klass->bell_notify (backend);
}
/**
* clutter_backend_get_input_method:
* @backend: the #CLutterBackend
*
* Returns the input method used by Clutter
*
* Returns: (transfer none): the input method
**/
ClutterInputMethod *
clutter_backend_get_input_method (ClutterBackend *backend)
{
return backend->input_method;
}
/**
* clutter_backend_set_input_method:
* @backend: the #ClutterBackend
* @method: the input method
*
* Sets the input method to be used by Clutter
**/
void
clutter_backend_set_input_method (ClutterBackend *backend,
ClutterInputMethod *method)
{
g_set_object (&backend->input_method, method);
}

View File

@@ -74,6 +74,15 @@ const cairo_font_options_t * clutter_backend_get_font_options (Clutter
CLUTTER_AVAILABLE_IN_1_8 CLUTTER_AVAILABLE_IN_1_8
CoglContext * clutter_backend_get_cogl_context (ClutterBackend *backend); CoglContext * clutter_backend_get_cogl_context (ClutterBackend *backend);
CLUTTER_AVAILABLE_IN_ALL
void clutter_backend_bell_notify (ClutterBackend *backend);
CLUTTER_AVAILABLE_IN_MUTTER
ClutterInputMethod * clutter_backend_get_input_method (ClutterBackend *backend);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_backend_set_input_method (ClutterBackend *backend,
ClutterInputMethod *method);
G_END_DECLS G_END_DECLS
#endif /* __CLUTTER_BACKEND_H__ */ #endif /* __CLUTTER_BACKEND_H__ */

View File

@@ -324,7 +324,7 @@ _clutter_bezier_init (ClutterBezier *b,
* triggers, we need to change those two functions a bit. * triggers, we need to change those two functions a bit.
*/ */
if (b->ax > 0x1fff || b->bx > 0x1fff || b->cx > 0x1fff) if (b->ax > 0x1fff || b->bx > 0x1fff || b->cx > 0x1fff)
g_warning ("Calculated coefficents will result in multiplication " g_warning ("Calculated coefficients will result in multiplication "
"overflow in clutter_bezier_t2x and clutter_bezier_t2y."); "overflow in clutter_bezier_t2x and clutter_bezier_t2y.");
/* /*

View File

@@ -145,6 +145,9 @@ struct _ClutterInputDevice
guint is_enabled : 1; guint is_enabled : 1;
}; };
typedef void (*ClutterEmitInputDeviceEvent) (ClutterEvent *event,
ClutterInputDevice *device);
struct _ClutterInputDeviceClass struct _ClutterInputDeviceClass
{ {
GObjectClass parent_class; GObjectClass parent_class;
@@ -163,6 +166,11 @@ struct _ClutterInputDeviceClass
gboolean (* is_grouped) (ClutterInputDevice *device, gboolean (* is_grouped) (ClutterInputDevice *device,
ClutterInputDevice *other_device); ClutterInputDevice *other_device);
/* Keyboard accessbility */
void (* process_kbd_a11y_event) (ClutterEvent *event,
ClutterInputDevice *device,
ClutterEmitInputDeviceEvent emit_event_func);
}; };
/* Platform-dependent interface */ /* Platform-dependent interface */

View File

@@ -54,6 +54,9 @@ struct _ClutterDeviceManagerPrivate
{ {
/* back-pointer to the backend */ /* back-pointer to the backend */
ClutterBackend *backend; ClutterBackend *backend;
/* Keyboard a11y */
ClutterKbdA11ySettings kbd_a11y_settings;
}; };
enum enum
@@ -72,6 +75,8 @@ enum
DEVICE_ADDED, DEVICE_ADDED,
DEVICE_REMOVED, DEVICE_REMOVED,
TOOL_CHANGED, TOOL_CHANGED,
KBD_A11Y_MASK_CHANGED,
KBD_A11Y_FLAGS_CHANGED,
LAST_SIGNAL LAST_SIGNAL
}; };
@@ -196,6 +201,46 @@ clutter_device_manager_class_init (ClutterDeviceManagerClass *klass)
G_TYPE_NONE, 2, G_TYPE_NONE, 2,
CLUTTER_TYPE_INPUT_DEVICE, CLUTTER_TYPE_INPUT_DEVICE,
CLUTTER_TYPE_INPUT_DEVICE_TOOL); CLUTTER_TYPE_INPUT_DEVICE_TOOL);
/**
* ClutterDeviceManager::kbd-a11y-mods-state-changed:
* @manager: the #ClutterDeviceManager that emitted the signal
* @latched_mask: the latched modifier mask from stickykeys
* @locked_mask: the locked modifier mask from stickykeys
*
* The ::kbd-a11y-mods-state-changed signal is emitted each time either the
* latched modifiers mask or locked modifiers mask are changed as the
* result of keyboard accessibilty's sticky keys operations.
*/
manager_signals[KBD_A11Y_MASK_CHANGED] =
g_signal_new (I_("kbd-a11y-mods-state-changed"),
G_TYPE_FROM_CLASS (klass),
G_SIGNAL_RUN_LAST,
0, NULL, NULL,
_clutter_marshal_VOID__UINT_UINT,
G_TYPE_NONE, 2,
G_TYPE_UINT,
G_TYPE_UINT);
/**
* ClutterDeviceManager::kbd-a11y-flags-changed:
* @manager: the #ClutterDeviceManager that emitted the signal
* @settings_flags: the new ClutterKeyboardA11yFlags configuration
* @changed_mask: the ClutterKeyboardA11yFlags changed
*
* The ::kbd-a11y-flags-changed signal is emitted each time the
* ClutterKeyboardA11yFlags configuration is changed as the result of
* keyboard accessibilty operations.
*/
manager_signals[KBD_A11Y_FLAGS_CHANGED] =
g_signal_new (I_("kbd-a11y-flags-changed"),
G_TYPE_FROM_CLASS (klass),
G_SIGNAL_RUN_LAST,
0, NULL, NULL,
_clutter_marshal_VOID__UINT_UINT,
G_TYPE_NONE, 2,
G_TYPE_UINT,
G_TYPE_UINT);
} }
static void static void
@@ -471,6 +516,21 @@ clutter_device_manager_create_virtual_device (ClutterDeviceManager *device_man
device_type); device_type);
} }
/**
* clutter_device_manager_supported_virtua_device_types: (skip)
*/
ClutterVirtualDeviceType
clutter_device_manager_get_supported_virtual_device_types (ClutterDeviceManager *device_manager)
{
ClutterDeviceManagerClass *manager_class;
g_return_val_if_fail (CLUTTER_IS_DEVICE_MANAGER (device_manager),
CLUTTER_VIRTUAL_DEVICE_TYPE_NONE);
manager_class = CLUTTER_DEVICE_MANAGER_GET_CLASS (device_manager);
return manager_class->get_supported_virtual_device_types (device_manager);
}
void void
_clutter_device_manager_compress_motion (ClutterDeviceManager *device_manager, _clutter_device_manager_compress_motion (ClutterDeviceManager *device_manager,
ClutterEvent *event, ClutterEvent *event,
@@ -487,3 +547,43 @@ _clutter_device_manager_compress_motion (ClutterDeviceManager *device_manager,
manager_class->compress_motion (device_manager, event, to_discard); manager_class->compress_motion (device_manager, event, to_discard);
} }
static gboolean
are_kbd_a11y_settings_equal (ClutterKbdA11ySettings *a,
ClutterKbdA11ySettings *b)
{
return (a->controls == b->controls &&
a->slowkeys_delay == b->slowkeys_delay &&
a->debounce_delay == b->debounce_delay &&
a->timeout_delay == b->timeout_delay &&
a->mousekeys_init_delay == b->mousekeys_init_delay &&
a->mousekeys_max_speed == b->mousekeys_max_speed &&
a->mousekeys_accel_time == b->mousekeys_accel_time);
}
void
clutter_device_manager_set_kbd_a11y_settings (ClutterDeviceManager *device_manager,
ClutterKbdA11ySettings *settings)
{
ClutterDeviceManagerClass *manager_class;
g_return_if_fail (CLUTTER_IS_DEVICE_MANAGER (device_manager));
if (are_kbd_a11y_settings_equal (&device_manager->priv->kbd_a11y_settings, settings))
return;
device_manager->priv->kbd_a11y_settings = *settings;
manager_class = CLUTTER_DEVICE_MANAGER_GET_CLASS (device_manager);
if (manager_class->apply_kbd_a11y_settings)
manager_class->apply_kbd_a11y_settings (device_manager, settings);
}
void
clutter_device_manager_get_kbd_a11y_settings (ClutterDeviceManager *device_manager,
ClutterKbdA11ySettings *settings)
{
g_return_if_fail (CLUTTER_IS_DEVICE_MANAGER (device_manager));
*settings = device_manager->priv->kbd_a11y_settings;
}

View File

@@ -44,6 +44,35 @@ typedef struct _ClutterDeviceManager ClutterDeviceManager;
typedef struct _ClutterDeviceManagerPrivate ClutterDeviceManagerPrivate; typedef struct _ClutterDeviceManagerPrivate ClutterDeviceManagerPrivate;
typedef struct _ClutterDeviceManagerClass ClutterDeviceManagerClass; typedef struct _ClutterDeviceManagerClass ClutterDeviceManagerClass;
/**
* ClutterVirtualDeviceType:
*/
typedef enum _ClutterVirtualDeviceType
{
CLUTTER_VIRTUAL_DEVICE_TYPE_NONE = 0,
CLUTTER_VIRTUAL_DEVICE_TYPE_KEYBOARD = 1 << 0,
CLUTTER_VIRTUAL_DEVICE_TYPE_POINTER = 1 << 1,
CLUTTER_VIRTUAL_DEVICE_TYPE_TOUCHSCREEN = 1 << 2,
} ClutterVirtualDeviceType;
/**
* ClutterKbdA11ySettings:
*
* The #ClutterKbdA11ySettings structure contains keyboard accessibility
* settings
*
*/
typedef struct _ClutterKbdA11ySettings
{
ClutterKeyboardA11yFlags controls;
gint slowkeys_delay;
gint debounce_delay;
gint timeout_delay;
gint mousekeys_init_delay;
gint mousekeys_max_speed;
gint mousekeys_accel_time;
} ClutterKbdA11ySettings;
/** /**
* ClutterDeviceManager: * ClutterDeviceManager:
* *
@@ -85,10 +114,13 @@ struct _ClutterDeviceManagerClass
ClutterStage *stage); ClutterStage *stage);
ClutterVirtualInputDevice *(* create_virtual_device) (ClutterDeviceManager *device_manager, ClutterVirtualInputDevice *(* create_virtual_device) (ClutterDeviceManager *device_manager,
ClutterInputDeviceType device_type); ClutterInputDeviceType device_type);
ClutterVirtualDeviceType (* get_supported_virtual_device_types) (ClutterDeviceManager *device_manager);
void (* compress_motion) (ClutterDeviceManager *device_manger, void (* compress_motion) (ClutterDeviceManager *device_manger,
ClutterEvent *event, ClutterEvent *event,
const ClutterEvent *to_discard); const ClutterEvent *to_discard);
/* Keyboard accessbility */
void (* apply_kbd_a11y_settings) (ClutterDeviceManager *device_manger,
ClutterKbdA11ySettings *settings);
/* padding */ /* padding */
gpointer _padding[6]; gpointer _padding[6];
}; };
@@ -114,6 +146,16 @@ CLUTTER_AVAILABLE_IN_ALL
ClutterVirtualInputDevice *clutter_device_manager_create_virtual_device (ClutterDeviceManager *device_manager, ClutterVirtualInputDevice *clutter_device_manager_create_virtual_device (ClutterDeviceManager *device_manager,
ClutterInputDeviceType device_type); ClutterInputDeviceType device_type);
CLUTTER_AVAILABLE_IN_ALL
ClutterVirtualDeviceType clutter_device_manager_get_supported_virtual_device_types (ClutterDeviceManager *device_manager);
CLUTTER_AVAILABLE_IN_ALL
void clutter_device_manager_set_kbd_a11y_settings (ClutterDeviceManager *device_manager,
ClutterKbdA11ySettings *settings);
CLUTTER_AVAILABLE_IN_ALL
void clutter_device_manager_get_kbd_a11y_settings (ClutterDeviceManager *device_manager,
ClutterKbdA11ySettings *settings);
G_END_DECLS G_END_DECLS
#endif /* __CLUTTER_DEVICE_MANAGER_H__ */ #endif /* __CLUTTER_DEVICE_MANAGER_H__ */

View File

@@ -396,6 +396,43 @@ typedef enum {
CLUTTER_MODIFIER_MASK = 0x5c001fff CLUTTER_MODIFIER_MASK = 0x5c001fff
} ClutterModifierType; } ClutterModifierType;
/**
* ClutterKeyboardA11yFlags:
* @CLUTTER_A11Y_KEYBOARD_ENABLED:
* @CLUTTER_A11Y_TIMEOUT_ENABLED:
* @CLUTTER_A11Y_MOUSE_KEYS_ENABLED:
* @CLUTTER_A11Y_SLOW_KEYS_ENABLED:
* @CLUTTER_A11Y_SLOW_KEYS_BEEP_PRESS:
* @CLUTTER_A11Y_SLOW_KEYS_BEEP_ACCEPT:
* @CLUTTER_A11Y_SLOW_KEYS_BEEP_REJECT:
* @CLUTTER_A11Y_BOUNCE_KEYS_ENABLED:
* @CLUTTER_A11Y_BOUNCE_KEYS_BEEP_REJECT:
* @CLUTTER_A11Y_TOGGLE_KEYS_ENABLED:
* @CLUTTER_A11Y_STICKY_KEYS_ENABLED:
* @CLUTTER_A11Y_STICKY_KEYS_TWO_KEY_OFF:
* @CLUTTER_A11Y_STICKY_KEYS_BEEP:
* @CLUTTER_A11Y_FEATURE_STATE_CHANGE_BEEP:
*
* Keyboard accessibility features applied to a ClutterInputDevice keyboard.
*
*/
typedef enum {
CLUTTER_A11Y_KEYBOARD_ENABLED = 1 << 0,
CLUTTER_A11Y_TIMEOUT_ENABLED = 1 << 1,
CLUTTER_A11Y_MOUSE_KEYS_ENABLED = 1 << 2,
CLUTTER_A11Y_SLOW_KEYS_ENABLED = 1 << 3,
CLUTTER_A11Y_SLOW_KEYS_BEEP_PRESS = 1 << 4,
CLUTTER_A11Y_SLOW_KEYS_BEEP_ACCEPT = 1 << 5,
CLUTTER_A11Y_SLOW_KEYS_BEEP_REJECT = 1 << 6,
CLUTTER_A11Y_BOUNCE_KEYS_ENABLED = 1 << 7,
CLUTTER_A11Y_BOUNCE_KEYS_BEEP_REJECT = 1 << 8,
CLUTTER_A11Y_TOGGLE_KEYS_ENABLED = 1 << 9,
CLUTTER_A11Y_STICKY_KEYS_ENABLED = 1 << 10,
CLUTTER_A11Y_STICKY_KEYS_TWO_KEY_OFF = 1 << 11,
CLUTTER_A11Y_STICKY_KEYS_BEEP = 1 << 12,
CLUTTER_A11Y_FEATURE_STATE_CHANGE_BEEP = 1 << 13,
} ClutterKeyboardA11yFlags;
/** /**
* ClutterActorFlags: * ClutterActorFlags:
* @CLUTTER_ACTOR_MAPPED: the actor will be painted (is visible, and inside * @CLUTTER_ACTOR_MAPPED: the actor will be painted (is visible, and inside
@@ -730,8 +767,9 @@ typedef enum { /*< prefix=CLUTTER_DRAG >*/
* Since: 0.6 * Since: 0.6
*/ */
typedef enum { /*< flags prefix=CLUTTER_EVENT >*/ typedef enum { /*< flags prefix=CLUTTER_EVENT >*/
CLUTTER_EVENT_NONE = 0, CLUTTER_EVENT_NONE = 0,
CLUTTER_EVENT_FLAG_SYNTHETIC = 1 << 0 CLUTTER_EVENT_FLAG_SYNTHETIC = 1 << 0,
CLUTTER_EVENT_FLAG_INPUT_METHOD = 1 << 1
} ClutterEventFlags; } ClutterEventFlags;
/** /**
@@ -1536,6 +1574,41 @@ typedef enum {
CLUTTER_INPUT_DEVICE_MAPPING_RELATIVE, CLUTTER_INPUT_DEVICE_MAPPING_RELATIVE,
} ClutterInputDeviceMapping; } ClutterInputDeviceMapping;
typedef enum {
CLUTTER_INPUT_CONTENT_HINT_COMPLETION = 1 << 0,
CLUTTER_INPUT_CONTENT_HINT_SPELLCHECK = 1 << 1,
CLUTTER_INPUT_CONTENT_HINT_AUTO_CAPITALIZATION = 1 << 2,
CLUTTER_INPUT_CONTENT_HINT_LOWERCASE = 1 << 3,
CLUTTER_INPUT_CONTENT_HINT_UPPERCASE = 1 << 4,
CLUTTER_INPUT_CONTENT_HINT_TITLECASE = 1 << 5,
CLUTTER_INPUT_CONTENT_HINT_HIDDEN_TEXT = 1 << 6,
CLUTTER_INPUT_CONTENT_HINT_SENSITIVE_DATA = 1 << 7,
CLUTTER_INPUT_CONTENT_HINT_LATIN = 1 << 8,
CLUTTER_INPUT_CONTENT_HINT_MULTILINE = 1 << 9,
} ClutterInputContentHintFlags;
typedef enum {
CLUTTER_INPUT_CONTENT_PURPOSE_NORMAL,
CLUTTER_INPUT_CONTENT_PURPOSE_ALPHA,
CLUTTER_INPUT_CONTENT_PURPOSE_DIGITS,
CLUTTER_INPUT_CONTENT_PURPOSE_NUMBER,
CLUTTER_INPUT_CONTENT_PURPOSE_PHONE,
CLUTTER_INPUT_CONTENT_PURPOSE_URL,
CLUTTER_INPUT_CONTENT_PURPOSE_EMAIL,
CLUTTER_INPUT_CONTENT_PURPOSE_NAME,
CLUTTER_INPUT_CONTENT_PURPOSE_PASSWORD,
CLUTTER_INPUT_CONTENT_PURPOSE_DATE,
CLUTTER_INPUT_CONTENT_PURPOSE_TIME,
CLUTTER_INPUT_CONTENT_PURPOSE_DATETIME,
CLUTTER_INPUT_CONTENT_PURPOSE_TERMINAL,
} ClutterInputContentPurpose;
typedef enum {
CLUTTER_INPUT_PANEL_STATE_OFF,
CLUTTER_INPUT_PANEL_STATE_ON,
CLUTTER_INPUT_PANEL_STATE_TOGGLE,
} ClutterInputPanelState;
G_END_DECLS G_END_DECLS
#endif /* __CLUTTER_ENUMS_H__ */ #endif /* __CLUTTER_ENUMS_H__ */

View File

@@ -0,0 +1,40 @@
/*
* Copyright (C) 2017,2018 Red Hat
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*
* Author: Carlos Garnacho <carlosg@gnome.org>
*/
#ifndef __CLUTTER_INPUT_FOCUS_PRIVATE_H__
#define __CLUTTER_INPUT_FOCUS_PRIVATE_H__
void clutter_input_focus_focus_in (ClutterInputFocus *focus,
ClutterInputMethod *method);
void clutter_input_focus_focus_out (ClutterInputFocus *focus);
void clutter_input_focus_commit (ClutterInputFocus *focus,
const gchar *text);
void clutter_input_focus_delete_surrounding (ClutterInputFocus *focus,
guint offset,
guint len);
void clutter_input_focus_request_surrounding (ClutterInputFocus *focus);
void clutter_input_focus_set_preedit_text (ClutterInputFocus *focus,
const gchar *preedit,
guint cursor);
#endif /* __CLUTTER_INPUT_FOCUS_PRIVATE_H__ */

View File

@@ -0,0 +1,243 @@
/*
* Copyright (C) 2017,2018 Red Hat
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*
* Author: Carlos Garnacho <carlosg@gnome.org>
*/
#include "clutter-build-config.h"
#include "clutter/clutter-input-focus.h"
#include "clutter/clutter-input-focus-private.h"
#include "clutter/clutter-input-method-private.h"
typedef struct _ClutterInputFocusPrivate ClutterInputFocusPrivate;
struct _ClutterInputFocusPrivate
{
ClutterInputMethod *im;
};
G_DEFINE_ABSTRACT_TYPE_WITH_PRIVATE (ClutterInputFocus, clutter_input_focus, G_TYPE_OBJECT)
static void
clutter_input_focus_real_focus_in (ClutterInputFocus *focus,
ClutterInputMethod *im)
{
ClutterInputFocusPrivate *priv;
priv = clutter_input_focus_get_instance_private (focus);
priv->im = im;
}
static void
clutter_input_focus_real_focus_out (ClutterInputFocus *focus)
{
ClutterInputFocusPrivate *priv;
priv = clutter_input_focus_get_instance_private (focus);
priv->im = NULL;
}
static void
clutter_input_focus_class_init (ClutterInputFocusClass *klass)
{
klass->focus_in = clutter_input_focus_real_focus_in;
klass->focus_out = clutter_input_focus_real_focus_out;
}
static void
clutter_input_focus_init (ClutterInputFocus *focus)
{
}
gboolean
clutter_input_focus_is_focused (ClutterInputFocus *focus)
{
ClutterInputFocusPrivate *priv;
priv = clutter_input_focus_get_instance_private (focus);
return !!priv->im;
}
void
clutter_input_focus_reset (ClutterInputFocus *focus)
{
ClutterInputFocusPrivate *priv;
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
g_return_if_fail (clutter_input_focus_is_focused (focus));
priv = clutter_input_focus_get_instance_private (focus);
clutter_input_method_reset (priv->im);
}
void
clutter_input_focus_set_cursor_location (ClutterInputFocus *focus,
const ClutterRect *rect)
{
ClutterInputFocusPrivate *priv;
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
g_return_if_fail (clutter_input_focus_is_focused (focus));
priv = clutter_input_focus_get_instance_private (focus);
clutter_input_method_set_cursor_location (priv->im, rect);
}
void
clutter_input_focus_set_surrounding (ClutterInputFocus *focus,
const gchar *text,
guint cursor,
guint anchor)
{
ClutterInputFocusPrivate *priv;
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
g_return_if_fail (clutter_input_focus_is_focused (focus));
priv = clutter_input_focus_get_instance_private (focus);
clutter_input_method_set_surrounding (priv->im, text, cursor, anchor);
}
void
clutter_input_focus_set_content_hints (ClutterInputFocus *focus,
ClutterInputContentHintFlags hints)
{
ClutterInputFocusPrivate *priv;
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
g_return_if_fail (clutter_input_focus_is_focused (focus));
priv = clutter_input_focus_get_instance_private (focus);
clutter_input_method_set_content_hints (priv->im, hints);
}
void
clutter_input_focus_set_content_purpose (ClutterInputFocus *focus,
ClutterInputContentPurpose purpose)
{
ClutterInputFocusPrivate *priv;
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
g_return_if_fail (clutter_input_focus_is_focused (focus));
priv = clutter_input_focus_get_instance_private (focus);
clutter_input_method_set_content_purpose (priv->im, purpose);
}
gboolean
clutter_input_focus_filter_key_event (ClutterInputFocus *focus,
const ClutterKeyEvent *key)
{
ClutterInputFocusPrivate *priv;
g_return_val_if_fail (CLUTTER_IS_INPUT_FOCUS (focus), FALSE);
g_return_val_if_fail (clutter_input_focus_is_focused (focus), FALSE);
priv = clutter_input_focus_get_instance_private (focus);
return clutter_input_method_filter_key_event (priv->im, key);
}
void
clutter_input_focus_set_can_show_preedit (ClutterInputFocus *focus,
gboolean can_show_preedit)
{
ClutterInputFocusPrivate *priv;
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
g_return_if_fail (clutter_input_focus_is_focused (focus));
priv = clutter_input_focus_get_instance_private (focus);
clutter_input_method_set_can_show_preedit (priv->im, can_show_preedit);
}
void
clutter_input_focus_request_toggle_input_panel (ClutterInputFocus *focus)
{
ClutterInputFocusPrivate *priv;
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
g_return_if_fail (clutter_input_focus_is_focused (focus));
priv = clutter_input_focus_get_instance_private (focus);
clutter_input_method_toggle_input_panel (priv->im);
}
void
clutter_input_focus_focus_in (ClutterInputFocus *focus,
ClutterInputMethod *im)
{
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
CLUTTER_INPUT_FOCUS_GET_CLASS (focus)->focus_in (focus, im);
}
void
clutter_input_focus_focus_out (ClutterInputFocus *focus)
{
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
CLUTTER_INPUT_FOCUS_GET_CLASS (focus)->focus_out (focus);
}
void
clutter_input_focus_commit (ClutterInputFocus *focus,
const gchar *text)
{
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
CLUTTER_INPUT_FOCUS_GET_CLASS (focus)->commit_text (focus, text);
}
void
clutter_input_focus_delete_surrounding (ClutterInputFocus *focus,
guint offset,
guint len)
{
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
CLUTTER_INPUT_FOCUS_GET_CLASS (focus)->delete_surrounding (focus, offset, len);
}
void
clutter_input_focus_request_surrounding (ClutterInputFocus *focus)
{
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
CLUTTER_INPUT_FOCUS_GET_CLASS (focus)->request_surrounding (focus);
}
void
clutter_input_focus_set_preedit_text (ClutterInputFocus *focus,
const gchar *preedit,
guint cursor)
{
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
CLUTTER_INPUT_FOCUS_GET_CLASS (focus)->set_preedit_text (focus, preedit, cursor);
}

View File

@@ -0,0 +1,83 @@
/*
* Copyright (C) 2017,2018 Red Hat
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*
* Author: Carlos Garnacho <carlosg@gnome.org>
*/
#ifndef __CLUTTER_INPUT_FOCUS_H__
#define __CLUTTER_INPUT_FOCUS_H__
#include <clutter/clutter.h>
#define CLUTTER_TYPE_INPUT_FOCUS (clutter_input_focus_get_type ())
CLUTTER_AVAILABLE_IN_MUTTER
G_DECLARE_DERIVABLE_TYPE (ClutterInputFocus, clutter_input_focus,
CLUTTER, INPUT_FOCUS, GObject)
struct _ClutterInputFocusClass
{
GObjectClass parent_class;
GTypeInterface iface;
void (* focus_in) (ClutterInputFocus *focus,
ClutterInputMethod *input_method);
void (* focus_out) (ClutterInputFocus *focus);
void (* request_surrounding) (ClutterInputFocus *focus);
void (* delete_surrounding) (ClutterInputFocus *focus,
guint offset,
guint len);
void (* commit_text) (ClutterInputFocus *focus,
const gchar *text);
void (* set_preedit_text) (ClutterInputFocus *focus,
const gchar *preedit,
guint cursor);
};
CLUTTER_AVAILABLE_IN_MUTTER
gboolean clutter_input_focus_is_focused (ClutterInputFocus *focus);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_focus_reset (ClutterInputFocus *focus);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_focus_set_cursor_location (ClutterInputFocus *focus,
const ClutterRect *rect);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_focus_set_surrounding (ClutterInputFocus *focus,
const gchar *text,
guint cursor,
guint anchor);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_focus_set_content_hints (ClutterInputFocus *focus,
ClutterInputContentHintFlags hint);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_focus_set_content_purpose (ClutterInputFocus *focus,
ClutterInputContentPurpose purpose);
CLUTTER_AVAILABLE_IN_MUTTER
gboolean clutter_input_focus_filter_key_event (ClutterInputFocus *focus,
const ClutterKeyEvent *key);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_focus_set_can_show_preedit (ClutterInputFocus *focus,
gboolean can_show_preedit);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_focus_request_toggle_input_panel (ClutterInputFocus *focus);
#endif /* __CLUTTER_INPUT_FOCUS_H__ */

View File

@@ -0,0 +1,46 @@
/*
* Copyright (C) 2017,2018 Red Hat
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*
* Author: Carlos Garnacho <carlosg@gnome.org>
*/
#ifndef __CLUTTER_INPUT_METHOD_PRIVATE_H__
#define __CLUTTER_INPUT_METHOD_PRIVATE_H__
ClutterInputFocus * clutter_input_method_get_focus (ClutterInputMethod *method);
void clutter_input_method_reset (ClutterInputMethod *method);
void clutter_input_method_set_cursor_location (ClutterInputMethod *method,
const ClutterRect *rect);
void clutter_input_method_set_surrounding (ClutterInputMethod *method,
const gchar *text,
guint cursor,
guint anchor);
void clutter_input_method_set_content_hints (ClutterInputMethod *method,
ClutterInputContentHintFlags hints);
void clutter_input_method_set_content_purpose (ClutterInputMethod *method,
ClutterInputContentPurpose purpose);
void clutter_input_method_set_can_show_preedit (ClutterInputMethod *method,
gboolean can_show_preedit);
gboolean clutter_input_method_filter_key_event (ClutterInputMethod *method,
const ClutterKeyEvent *key);
void clutter_input_method_toggle_input_panel (ClutterInputMethod *method);
#endif /* __CLUTTER_INPUT_METHOD_PRIVATE_H__ */

View File

@@ -0,0 +1,444 @@
/*
* Copyright (C) 2017,2018 Red Hat
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*
* Author: Carlos Garnacho <carlosg@gnome.org>
*/
#include "clutter-build-config.h"
#include "clutter-private.h"
#include "clutter/clutter-input-method.h"
#include "clutter/clutter-input-method-private.h"
#include "clutter/clutter-input-focus-private.h"
typedef struct _ClutterInputMethodPrivate ClutterInputMethodPrivate;
struct _ClutterInputMethodPrivate
{
ClutterInputFocus *focus;
ClutterInputContentHintFlags content_hints;
ClutterInputContentPurpose content_purpose;
gboolean can_show_preedit;
};
enum {
COMMIT,
DELETE_SURROUNDING,
REQUEST_SURROUNDING,
INPUT_PANEL_STATE,
CURSOR_LOCATION_CHANGED,
N_SIGNALS,
};
enum {
PROP_0,
PROP_CONTENT_HINTS,
PROP_CONTENT_PURPOSE,
PROP_CAN_SHOW_PREEDIT,
N_PROPS
};
static guint signals[N_SIGNALS] = { 0 };
static GParamSpec *pspecs[N_PROPS] = { 0 };
G_DEFINE_ABSTRACT_TYPE_WITH_PRIVATE (ClutterInputMethod, clutter_input_method, G_TYPE_OBJECT)
static void
set_content_hints (ClutterInputMethod *im,
ClutterInputContentHintFlags content_hints)
{
ClutterInputMethodPrivate *priv;
priv = clutter_input_method_get_instance_private (im);
priv->content_hints = content_hints;
CLUTTER_INPUT_METHOD_GET_CLASS (im)->update_content_hints (im, content_hints);
}
static void
set_content_purpose (ClutterInputMethod *im,
ClutterInputContentPurpose content_purpose)
{
ClutterInputMethodPrivate *priv;
priv = clutter_input_method_get_instance_private (im);
priv->content_purpose = content_purpose;
CLUTTER_INPUT_METHOD_GET_CLASS (im)->update_content_purpose (im,
content_purpose);
}
static void
set_can_show_preedit (ClutterInputMethod *im,
gboolean can_show_preedit)
{
ClutterInputMethodPrivate *priv;
priv = clutter_input_method_get_instance_private (im);
priv->can_show_preedit = can_show_preedit;
}
static void
clutter_input_method_set_property (GObject *object,
guint prop_id,
const GValue *value,
GParamSpec *pspec)
{
switch (prop_id)
{
case PROP_CONTENT_HINTS:
set_content_hints (CLUTTER_INPUT_METHOD (object),
g_value_get_flags (value));
break;
case PROP_CONTENT_PURPOSE:
set_content_purpose (CLUTTER_INPUT_METHOD (object),
g_value_get_enum (value));
break;
case PROP_CAN_SHOW_PREEDIT:
set_can_show_preedit (CLUTTER_INPUT_METHOD (object),
g_value_get_boolean (value));
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
clutter_input_method_get_property (GObject *object,
guint prop_id,
GValue *value,
GParamSpec *pspec)
{
ClutterInputMethodPrivate *priv;
ClutterInputMethod *im;
im = CLUTTER_INPUT_METHOD (object);
priv = clutter_input_method_get_instance_private (im);
switch (prop_id)
{
case PROP_CONTENT_HINTS:
g_value_set_flags (value, priv->content_hints);
break;
case PROP_CONTENT_PURPOSE:
g_value_set_enum (value, priv->content_purpose);
break;
case PROP_CAN_SHOW_PREEDIT:
g_value_set_boolean (value, priv->can_show_preedit);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
clutter_input_method_class_init (ClutterInputMethodClass *klass)
{
GObjectClass *object_class = G_OBJECT_CLASS (klass);
object_class->set_property = clutter_input_method_set_property;
object_class->get_property = clutter_input_method_get_property;
signals[COMMIT] =
g_signal_new ("commit",
G_TYPE_FROM_CLASS (object_class),
G_SIGNAL_RUN_LAST,
0, NULL, NULL, NULL,
G_TYPE_NONE, 1, G_TYPE_STRING);
signals[DELETE_SURROUNDING] =
g_signal_new ("delete-surrounding",
G_TYPE_FROM_CLASS (object_class),
G_SIGNAL_RUN_LAST,
0, NULL, NULL, NULL,
G_TYPE_NONE, 2, G_TYPE_UINT, G_TYPE_UINT);
signals[REQUEST_SURROUNDING] =
g_signal_new ("request-surrounding",
G_TYPE_FROM_CLASS (object_class),
G_SIGNAL_RUN_LAST,
0, NULL, NULL, NULL,
G_TYPE_NONE, 0);
signals[INPUT_PANEL_STATE] =
g_signal_new ("input-panel-state",
G_TYPE_FROM_CLASS (object_class),
G_SIGNAL_RUN_LAST,
0, NULL, NULL, NULL,
G_TYPE_NONE, 1,
CLUTTER_TYPE_INPUT_PANEL_STATE);
signals[CURSOR_LOCATION_CHANGED] =
g_signal_new ("cursor-location-changed",
G_TYPE_FROM_CLASS (object_class),
G_SIGNAL_RUN_LAST,
0, NULL, NULL, NULL,
G_TYPE_NONE, 1, CLUTTER_TYPE_RECT);
pspecs[PROP_CONTENT_HINTS] =
g_param_spec_flags ("content-hints",
P_("Content hints"),
P_("Content hints"),
CLUTTER_TYPE_INPUT_CONTENT_HINT_FLAGS, 0,
G_PARAM_READWRITE |
G_PARAM_STATIC_STRINGS);
pspecs[PROP_CONTENT_PURPOSE] =
g_param_spec_enum ("content-purpose",
P_("Content purpose"),
P_("Content purpose"),
CLUTTER_TYPE_INPUT_CONTENT_PURPOSE, 0,
G_PARAM_READWRITE |
G_PARAM_STATIC_STRINGS);
pspecs[PROP_CAN_SHOW_PREEDIT] =
g_param_spec_boolean ("can-show-preedit",
P_("Can show preedit"),
P_("Can show preedit"),
FALSE,
G_PARAM_READWRITE |
G_PARAM_STATIC_STRINGS);
g_object_class_install_properties (object_class, N_PROPS, pspecs);
}
static void
clutter_input_method_init (ClutterInputMethod *im)
{
}
void
clutter_input_method_focus_in (ClutterInputMethod *im,
ClutterInputFocus *focus)
{
ClutterInputMethodPrivate *priv;
ClutterInputMethodClass *klass;
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
g_return_if_fail (CLUTTER_IS_INPUT_FOCUS (focus));
priv = clutter_input_method_get_instance_private (im);
if (priv->focus == focus)
return;
if (priv->focus)
clutter_input_method_focus_out (im);
g_set_object (&priv->focus, focus);
if (focus)
{
klass = CLUTTER_INPUT_METHOD_GET_CLASS (im);
klass->focus_in (im, focus);
clutter_input_focus_focus_in (priv->focus, im);
}
}
void
clutter_input_method_focus_out (ClutterInputMethod *im)
{
ClutterInputMethodPrivate *priv;
ClutterInputMethodClass *klass;
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
priv = clutter_input_method_get_instance_private (im);
if (!priv->focus)
return;
clutter_input_focus_focus_out (priv->focus);
g_clear_object (&priv->focus);
klass = CLUTTER_INPUT_METHOD_GET_CLASS (im);
klass->focus_out (im);
g_signal_emit (im, signals[INPUT_PANEL_STATE],
0, CLUTTER_INPUT_PANEL_STATE_OFF);
}
ClutterInputFocus *
clutter_input_method_get_focus (ClutterInputMethod *im)
{
ClutterInputMethodPrivate *priv;
priv = clutter_input_method_get_instance_private (im);
return priv->focus;
}
void
clutter_input_method_commit (ClutterInputMethod *im,
const gchar *text)
{
ClutterInputMethodPrivate *priv;
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
priv = clutter_input_method_get_instance_private (im);
if (priv->focus)
clutter_input_focus_commit (priv->focus, text);
}
void
clutter_input_method_delete_surrounding (ClutterInputMethod *im,
guint offset,
guint len)
{
ClutterInputMethodPrivate *priv;
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
priv = clutter_input_method_get_instance_private (im);
if (priv->focus)
clutter_input_focus_delete_surrounding (priv->focus, offset, len);
}
void
clutter_input_method_request_surrounding (ClutterInputMethod *im)
{
ClutterInputMethodPrivate *priv;
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
priv = clutter_input_method_get_instance_private (im);
if (priv->focus)
clutter_input_focus_request_surrounding (priv->focus);
}
/**
* clutter_input_method_set_preedit_text:
* @im: a #ClutterInputMethod
* @preedit: (nullable): the preedit text, or %NULL
* @cursor: the cursor
*
* Sets the preedit text on the current input focus.
**/
void
clutter_input_method_set_preedit_text (ClutterInputMethod *im,
const gchar *preedit,
guint cursor)
{
ClutterInputMethodPrivate *priv;
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
priv = clutter_input_method_get_instance_private (im);
if (priv->focus)
clutter_input_focus_set_preedit_text (priv->focus, preedit, cursor);
}
void
clutter_input_method_notify_key_event (ClutterInputMethod *im,
const ClutterEvent *event,
gboolean filtered)
{
if (!filtered)
{
ClutterEvent *copy;
/* XXX: we rely on the IM implementation to notify back of
* key events in the exact same order they were given.
*/
copy = clutter_event_copy (event);
clutter_event_set_flags (copy, clutter_event_get_flags (event) |
CLUTTER_EVENT_FLAG_INPUT_METHOD);
clutter_event_set_source_device (copy, clutter_event_get_device (copy));
clutter_event_put (copy);
clutter_event_free (copy);
}
}
void
clutter_input_method_toggle_input_panel (ClutterInputMethod *im)
{
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
g_signal_emit (im, signals[INPUT_PANEL_STATE], 0,
CLUTTER_INPUT_PANEL_STATE_TOGGLE);
}
void
clutter_input_method_reset (ClutterInputMethod *im)
{
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
CLUTTER_INPUT_METHOD_GET_CLASS (im)->reset (im);
}
void
clutter_input_method_set_cursor_location (ClutterInputMethod *im,
const ClutterRect *rect)
{
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
CLUTTER_INPUT_METHOD_GET_CLASS (im)->set_cursor_location (im, rect);
g_signal_emit (im, signals[CURSOR_LOCATION_CHANGED], 0, rect);
}
void
clutter_input_method_set_surrounding (ClutterInputMethod *im,
const gchar *text,
guint cursor,
guint anchor)
{
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
CLUTTER_INPUT_METHOD_GET_CLASS (im)->set_surrounding (im, text,
cursor, anchor);
}
void
clutter_input_method_set_content_hints (ClutterInputMethod *im,
ClutterInputContentHintFlags hints)
{
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
g_object_set (G_OBJECT (im), "content-hints", hints, NULL);
}
void
clutter_input_method_set_content_purpose (ClutterInputMethod *im,
ClutterInputContentPurpose purpose)
{
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
g_object_set (G_OBJECT (im), "content-purpose", purpose, NULL);
}
void
clutter_input_method_set_can_show_preedit (ClutterInputMethod *im,
gboolean can_show_preedit)
{
g_return_if_fail (CLUTTER_IS_INPUT_METHOD (im));
g_object_set (G_OBJECT (im), "can-show-preedit", can_show_preedit, NULL);
}
gboolean
clutter_input_method_filter_key_event (ClutterInputMethod *im,
const ClutterKeyEvent *key)
{
ClutterInputMethodClass *im_class = CLUTTER_INPUT_METHOD_GET_CLASS (im);
g_return_val_if_fail (CLUTTER_IS_INPUT_METHOD (im), FALSE);
g_return_val_if_fail (key != NULL, FALSE);
if (clutter_event_get_flags ((ClutterEvent *) key) & CLUTTER_EVENT_FLAG_INPUT_METHOD)
return FALSE;
if (!im_class->filter_key_event)
return FALSE;
return im_class->filter_key_event (im, (const ClutterEvent *) key);
}

View File

@@ -0,0 +1,88 @@
/*
* Copyright (C) 2017,2018 Red Hat
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*
* Author: Carlos Garnacho <carlosg@gnome.org>
*/
#ifndef __CLUTTER_INPUT_METHOD_H__
#define __CLUTTER_INPUT_METHOD_H__
#include <clutter/clutter.h>
#define CLUTTER_TYPE_INPUT_METHOD (clutter_input_method_get_type ())
CLUTTER_AVAILABLE_IN_MUTTER
G_DECLARE_DERIVABLE_TYPE (ClutterInputMethod, clutter_input_method,
CLUTTER, INPUT_METHOD, GObject)
typedef struct _ClutterInputMethodClass ClutterInputMethodClass;
struct _ClutterInputMethodClass
{
GObjectClass parent_class;
void (* focus_in) (ClutterInputMethod *im,
ClutterInputFocus *actor);
void (* focus_out) (ClutterInputMethod *im);
void (* reset) (ClutterInputMethod *im);
void (* set_cursor_location) (ClutterInputMethod *im,
const ClutterRect *rect);
void (* set_surrounding) (ClutterInputMethod *im,
const gchar *text,
guint cursor,
guint anchor);
void (* update_content_hints) (ClutterInputMethod *im,
ClutterInputContentHintFlags hint);
void (* update_content_purpose) (ClutterInputMethod *im,
ClutterInputContentPurpose purpose);
gboolean (* filter_key_event) (ClutterInputMethod *im,
const ClutterEvent *key);
};
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_method_focus_in (ClutterInputMethod *im,
ClutterInputFocus *focus);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_method_focus_out (ClutterInputMethod *im);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_method_commit (ClutterInputMethod *im,
const gchar *text);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_method_delete_surrounding (ClutterInputMethod *im,
guint offset,
guint len);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_method_request_surrounding (ClutterInputMethod *im);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_method_set_preedit_text (ClutterInputMethod *im,
const gchar *preedit,
guint cursor);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_method_notify_key_event (ClutterInputMethod *im,
const ClutterEvent *event,
gboolean filtered);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_input_method_request_toggle_input_panel (ClutterInputMethod *im);
#endif /* __CLUTTER_INPUT_METHOD_H__ */

View File

@@ -2089,6 +2089,21 @@ emit_keyboard_event (ClutterEvent *event,
} }
} }
static inline void
process_key_event (ClutterEvent *event,
ClutterInputDevice *device)
{
ClutterInputDeviceClass *device_class = CLUTTER_INPUT_DEVICE_GET_CLASS (device);
if (device_class->process_kbd_a11y_event)
{
device_class->process_kbd_a11y_event (event, device, emit_keyboard_event);
return;
}
emit_keyboard_event (event, device);
}
static gboolean static gboolean
is_off_stage (ClutterActor *stage, is_off_stage (ClutterActor *stage,
gfloat x, gfloat x,
@@ -2176,7 +2191,7 @@ _clutter_process_event_details (ClutterActor *stage,
} }
} }
emit_keyboard_event (event, device); process_key_event (event, device);
} }
break; break;

View File

@@ -1486,10 +1486,11 @@ _clutter_stage_do_pick_on_view (ClutterStage *stage,
priv->viewport[1] * fb_scale - viewport_offset_y, priv->viewport[1] * fb_scale - viewport_offset_y,
priv->viewport[2] * fb_scale, priv->viewport[2] * fb_scale,
priv->viewport[3] * fb_scale); priv->viewport[3] * fb_scale);
cogl_set_viewport (priv->viewport[0] * fb_scale - viewport_offset_x, cogl_framebuffer_set_viewport (fb,
priv->viewport[1] * fb_scale - viewport_offset_y, priv->viewport[0] * fb_scale - viewport_offset_x,
priv->viewport[2] * fb_scale, priv->viewport[1] * fb_scale - viewport_offset_y,
priv->viewport[3] * fb_scale); priv->viewport[2] * fb_scale,
priv->viewport[3] * fb_scale);
read_x = dirty_x * fb_scale; read_x = dirty_x * fb_scale;
read_y = dirty_y * fb_scale; read_y = dirty_y * fb_scale;
@@ -3617,6 +3618,7 @@ _clutter_stage_maybe_setup_viewport (ClutterStage *stage,
ClutterStageView *view) ClutterStageView *view)
{ {
ClutterStagePrivate *priv = stage->priv; ClutterStagePrivate *priv = stage->priv;
CoglFramebuffer *fb = clutter_stage_view_get_framebuffer (view);
if (clutter_stage_view_is_dirty_viewport (view)) if (clutter_stage_view_is_dirty_viewport (view))
{ {
@@ -3637,10 +3639,11 @@ _clutter_stage_maybe_setup_viewport (ClutterStage *stage,
viewport_offset_x = view_layout.x * fb_scale; viewport_offset_x = view_layout.x * fb_scale;
viewport_offset_y = view_layout.y * fb_scale; viewport_offset_y = view_layout.y * fb_scale;
cogl_set_viewport (priv->viewport[0] * fb_scale - viewport_offset_x, cogl_framebuffer_set_viewport (fb,
priv->viewport[1] * fb_scale - viewport_offset_y, priv->viewport[0] * fb_scale - viewport_offset_x,
priv->viewport[2] * fb_scale, priv->viewport[1] * fb_scale - viewport_offset_y,
priv->viewport[3] * fb_scale); priv->viewport[2] * fb_scale,
priv->viewport[3] * fb_scale);
perspective = priv->perspective; perspective = priv->perspective;
@@ -3679,7 +3682,7 @@ _clutter_stage_maybe_setup_viewport (ClutterStage *stage,
if (clutter_stage_view_is_dirty_projection (view)) if (clutter_stage_view_is_dirty_projection (view))
{ {
cogl_set_projection_matrix (&priv->projection); cogl_framebuffer_set_projection_matrix (fb, &priv->projection);
clutter_stage_view_set_dirty_projection (view, FALSE); clutter_stage_view_set_dirty_projection (view, FALSE);
} }
@@ -4726,8 +4729,8 @@ capture_view (ClutterStage *stage,
if (paint) if (paint)
{ {
_clutter_stage_maybe_setup_viewport (stage, view);
cogl_push_framebuffer (framebuffer); cogl_push_framebuffer (framebuffer);
_clutter_stage_maybe_setup_viewport (stage, view);
clutter_stage_do_paint_view (stage, view, rect); clutter_stage_do_paint_view (stage, view, rect);
} }
@@ -4829,8 +4832,8 @@ capture_view_into (ClutterStage *stage,
if (paint) if (paint)
{ {
_clutter_stage_maybe_setup_viewport (stage, view);
cogl_push_framebuffer (framebuffer); cogl_push_framebuffer (framebuffer);
_clutter_stage_maybe_setup_viewport (stage, view);
clutter_stage_do_paint_view (stage, view, rect); clutter_stage_do_paint_view (stage, view, rect);
} }

View File

@@ -63,6 +63,7 @@
#include "clutter-units.h" #include "clutter-units.h"
#include "clutter-paint-volume-private.h" #include "clutter-paint-volume-private.h"
#include "clutter-scriptable.h" #include "clutter-scriptable.h"
#include "clutter-input-focus.h"
/* cursor width in pixels */ /* cursor width in pixels */
#define DEFAULT_CURSOR_SIZE 2 #define DEFAULT_CURSOR_SIZE 2
@@ -98,6 +99,12 @@ struct _LayoutCache
guint age; guint age;
}; };
struct _ClutterTextInputFocus
{
ClutterInputFocus parent_instance;
ClutterText *text;
};
struct _ClutterTextPrivate struct _ClutterTextPrivate
{ {
PangoFontDescription *font_desc; PangoFontDescription *font_desc;
@@ -176,6 +183,10 @@ struct _ClutterTextPrivate
/* Signal handler for when the :text-direction changes */ /* Signal handler for when the :text-direction changes */
guint direction_changed_id; guint direction_changed_id;
ClutterInputFocus *input_focus;
ClutterInputContentHintFlags input_hints;
ClutterInputContentPurpose input_purpose;
/* bitfields */ /* bitfields */
guint alignment : 2; guint alignment : 2;
guint wrap : 1; guint wrap : 1;
@@ -236,6 +247,8 @@ enum
PROP_SINGLE_LINE_MODE, PROP_SINGLE_LINE_MODE,
PROP_SELECTED_TEXT_COLOR, PROP_SELECTED_TEXT_COLOR,
PROP_SELECTED_TEXT_COLOR_SET, PROP_SELECTED_TEXT_COLOR_SET,
PROP_INPUT_HINTS,
PROP_INPUT_PURPOSE,
PROP_LAST PROP_LAST
}; };
@@ -269,6 +282,112 @@ static const ClutterColor default_selected_text_color = { 0, 0, 0, 255 };
static ClutterAnimatableIface *parent_animatable_iface = NULL; static ClutterAnimatableIface *parent_animatable_iface = NULL;
static ClutterScriptableIface *parent_scriptable_iface = NULL; static ClutterScriptableIface *parent_scriptable_iface = NULL;
/* ClutterTextInputFocus */
#define CLUTTER_TYPE_TEXT_INPUT_FOCUS (clutter_text_input_focus_get_type ())
G_DECLARE_FINAL_TYPE (ClutterTextInputFocus, clutter_text_input_focus,
CLUTTER, TEXT_INPUT_FOCUS, ClutterInputFocus)
G_DEFINE_TYPE (ClutterTextInputFocus, clutter_text_input_focus,
CLUTTER_TYPE_INPUT_FOCUS)
static void
clutter_text_input_focus_request_surrounding (ClutterInputFocus *focus)
{
ClutterText *clutter_text = CLUTTER_TEXT_INPUT_FOCUS (focus)->text;
ClutterTextBuffer *buffer;
const gchar *text;
gint anchor_pos, cursor_pos;
buffer = clutter_text_get_buffer (clutter_text);
text = clutter_text_buffer_get_text (buffer);
cursor_pos = clutter_text_get_cursor_position (clutter_text);
if (cursor_pos < 0)
cursor_pos = clutter_text_buffer_get_length (buffer);
anchor_pos = clutter_text_get_selection_bound (clutter_text);
if (anchor_pos < 0)
anchor_pos = cursor_pos;
clutter_input_focus_set_surrounding (focus, text,
g_utf8_offset_to_pointer (text, cursor_pos) - text,
g_utf8_offset_to_pointer (text, anchor_pos) - text);
}
static void
clutter_text_input_focus_delete_surrounding (ClutterInputFocus *focus,
guint offset,
guint len)
{
ClutterText *clutter_text = CLUTTER_TEXT_INPUT_FOCUS (focus)->text;
if (clutter_text_get_editable (clutter_text))
clutter_text_delete_text (clutter_text, offset, len);
}
static void
clutter_text_input_focus_commit_text (ClutterInputFocus *focus,
const gchar *text)
{
ClutterText *clutter_text = CLUTTER_TEXT_INPUT_FOCUS (focus)->text;
if (clutter_text_get_editable (clutter_text))
{
clutter_text_delete_selection (clutter_text);
clutter_text_insert_text (clutter_text, text,
clutter_text_get_cursor_position (clutter_text));
clutter_text_set_preedit_string (clutter_text, NULL, NULL, 0);
}
}
static void
clutter_text_input_focus_set_preedit_text (ClutterInputFocus *focus,
const gchar *preedit_text,
guint cursor_pos)
{
ClutterText *clutter_text = CLUTTER_TEXT_INPUT_FOCUS (focus)->text;
if (clutter_text_get_editable (clutter_text))
{
PangoAttrList *list;
list = pango_attr_list_new ();
pango_attr_list_insert (list, pango_attr_underline_new (PANGO_UNDERLINE_SINGLE));
clutter_text_set_preedit_string (clutter_text,
preedit_text, list,
cursor_pos);
pango_attr_list_unref (list);
}
}
static void
clutter_text_input_focus_class_init (ClutterTextInputFocusClass *klass)
{
ClutterInputFocusClass *focus_class = CLUTTER_INPUT_FOCUS_CLASS (klass);
focus_class->request_surrounding = clutter_text_input_focus_request_surrounding;
focus_class->delete_surrounding = clutter_text_input_focus_delete_surrounding;
focus_class->commit_text = clutter_text_input_focus_commit_text;
focus_class->set_preedit_text = clutter_text_input_focus_set_preedit_text;
}
static void
clutter_text_input_focus_init (ClutterTextInputFocus *focus)
{
}
static ClutterInputFocus *
clutter_text_input_focus_new (ClutterText *text)
{
ClutterTextInputFocus *focus;
focus = g_object_new (CLUTTER_TYPE_TEXT_INPUT_FOCUS, NULL);
focus->text = text;
return CLUTTER_INPUT_FOCUS (focus);
}
/* ClutterText */
static void clutter_scriptable_iface_init (ClutterScriptableIface *iface); static void clutter_scriptable_iface_init (ClutterScriptableIface *iface);
static void clutter_animatable_iface_init (ClutterAnimatableIface *iface); static void clutter_animatable_iface_init (ClutterAnimatableIface *iface);
@@ -1009,6 +1128,22 @@ clutter_text_position_to_coords (ClutterText *self,
return TRUE; return TRUE;
} }
static inline void
update_cursor_location (ClutterText *self)
{
ClutterTextPrivate *priv = self->priv;
ClutterRect rect;
float x, y;
if (!priv->editable)
return;
rect = priv->cursor_rect;
clutter_actor_get_transformed_position (CLUTTER_ACTOR (self), &x, &y);
clutter_rect_offset (&rect, x, y);
clutter_input_focus_set_cursor_location (priv->input_focus, &rect);
}
static inline void static inline void
clutter_text_ensure_cursor_position (ClutterText *self) clutter_text_ensure_cursor_position (ClutterText *self)
{ {
@@ -1057,6 +1192,8 @@ clutter_text_ensure_cursor_position (ClutterText *self)
g_signal_emit (self, text_signals[CURSOR_EVENT], 0, &cursor_pos); g_signal_emit (self, text_signals[CURSOR_EVENT], 0, &cursor_pos);
g_signal_emit (self, text_signals[CURSOR_CHANGED], 0); g_signal_emit (self, text_signals[CURSOR_CHANGED], 0);
update_cursor_location (self);
} }
} }
@@ -1503,6 +1640,8 @@ clutter_text_finalize (GObject *gobject)
clutter_text_set_buffer (self, NULL); clutter_text_set_buffer (self, NULL);
g_free (priv->font_name); g_free (priv->font_name);
g_clear_object (&priv->input_focus);
G_OBJECT_CLASS (clutter_text_parent_class)->finalize (gobject); G_OBJECT_CLASS (clutter_text_parent_class)->finalize (gobject);
} }
@@ -1859,6 +1998,7 @@ clutter_text_press (ClutterActor *actor,
return CLUTTER_EVENT_PROPAGATE; return CLUTTER_EVENT_PROPAGATE;
clutter_actor_grab_key_focus (actor); clutter_actor_grab_key_focus (actor);
clutter_input_focus_request_toggle_input_panel (priv->input_focus);
/* if the actor is empty we just reset everything and not /* if the actor is empty we just reset everything and not
* set up the dragging of the selection since there's nothing * set up the dragging of the selection since there's nothing
@@ -2084,10 +2224,17 @@ clutter_text_key_press (ClutterActor *actor,
pool = clutter_binding_pool_find (g_type_name (CLUTTER_TYPE_TEXT)); pool = clutter_binding_pool_find (g_type_name (CLUTTER_TYPE_TEXT));
g_assert (pool != NULL); g_assert (pool != NULL);
if (!(event->flags & CLUTTER_EVENT_FLAG_INPUT_METHOD) &&
clutter_input_focus_is_focused (priv->input_focus) &&
clutter_input_focus_filter_key_event (priv->input_focus, event))
return CLUTTER_EVENT_STOP;
/* we allow passing synthetic events that only contain /* we allow passing synthetic events that only contain
* the Unicode value and not the key symbol * the Unicode value and not the key symbol, unless they
* contain the input method flag.
*/ */
if (event->keyval == 0 && (event->flags & CLUTTER_EVENT_FLAG_SYNTHETIC)) if (event->keyval == 0 && (event->flags & CLUTTER_EVENT_FLAG_SYNTHETIC) &&
!(event->flags & CLUTTER_EVENT_FLAG_INPUT_METHOD))
res = FALSE; res = FALSE;
else else
res = clutter_binding_pool_activate (pool, event->keyval, res = clutter_binding_pool_activate (pool, event->keyval,
@@ -2141,6 +2288,20 @@ clutter_text_key_press (ClutterActor *actor,
return CLUTTER_EVENT_PROPAGATE; return CLUTTER_EVENT_PROPAGATE;
} }
static gboolean
clutter_text_key_release (ClutterActor *actor,
ClutterKeyEvent *event)
{
ClutterText *self = CLUTTER_TEXT (actor);
ClutterTextPrivate *priv = self->priv;
if (clutter_input_focus_is_focused (priv->input_focus) &&
clutter_input_focus_filter_key_event (priv->input_focus, event))
return CLUTTER_EVENT_STOP;
return CLUTTER_EVENT_PROPAGATE;
}
static void static void
clutter_text_compute_layout_offsets (ClutterText *self, clutter_text_compute_layout_offsets (ClutterText *self,
PangoLayout *layout, PangoLayout *layout,
@@ -2663,6 +2824,18 @@ static void
clutter_text_key_focus_in (ClutterActor *actor) clutter_text_key_focus_in (ClutterActor *actor)
{ {
ClutterTextPrivate *priv = CLUTTER_TEXT (actor)->priv; ClutterTextPrivate *priv = CLUTTER_TEXT (actor)->priv;
ClutterBackend *backend = clutter_get_default_backend ();
ClutterInputMethod *method = clutter_backend_get_input_method (backend);
if (method && priv->editable)
{
clutter_input_method_focus_in (method, priv->input_focus);
clutter_input_focus_set_content_purpose (priv->input_focus,
priv->input_purpose);
clutter_input_focus_set_content_hints (priv->input_focus,
priv->input_hints);
update_cursor_location (CLUTTER_TEXT (actor));
}
priv->has_focus = TRUE; priv->has_focus = TRUE;
@@ -2673,9 +2846,17 @@ static void
clutter_text_key_focus_out (ClutterActor *actor) clutter_text_key_focus_out (ClutterActor *actor)
{ {
ClutterTextPrivate *priv = CLUTTER_TEXT (actor)->priv; ClutterTextPrivate *priv = CLUTTER_TEXT (actor)->priv;
ClutterBackend *backend = clutter_get_default_backend ();
ClutterInputMethod *method = clutter_backend_get_input_method (backend);
priv->has_focus = FALSE; priv->has_focus = FALSE;
if (priv->editable && clutter_input_focus_is_focused (priv->input_focus))
{
clutter_text_set_preedit_string (CLUTTER_TEXT (actor), NULL, NULL, 0);
clutter_input_method_focus_out (method);
}
clutter_text_queue_redraw (actor); clutter_text_queue_redraw (actor);
} }
@@ -3369,6 +3550,7 @@ clutter_text_class_init (ClutterTextClass *klass)
actor_class->get_preferred_height = clutter_text_get_preferred_height; actor_class->get_preferred_height = clutter_text_get_preferred_height;
actor_class->allocate = clutter_text_allocate; actor_class->allocate = clutter_text_allocate;
actor_class->key_press_event = clutter_text_key_press; actor_class->key_press_event = clutter_text_key_press;
actor_class->key_release_event = clutter_text_key_release;
actor_class->button_press_event = clutter_text_button_press; actor_class->button_press_event = clutter_text_button_press;
actor_class->button_release_event = clutter_text_button_release; actor_class->button_release_event = clutter_text_button_release;
actor_class->motion_event = clutter_text_motion; actor_class->motion_event = clutter_text_motion;
@@ -3869,6 +4051,22 @@ clutter_text_class_init (ClutterTextClass *klass)
obj_props[PROP_SELECTED_TEXT_COLOR_SET] = pspec; obj_props[PROP_SELECTED_TEXT_COLOR_SET] = pspec;
g_object_class_install_property (gobject_class, PROP_SELECTED_TEXT_COLOR_SET, pspec); g_object_class_install_property (gobject_class, PROP_SELECTED_TEXT_COLOR_SET, pspec);
pspec = g_param_spec_flags ("input-hints",
P_("Input hints"),
P_("Input hints"),
CLUTTER_TYPE_INPUT_CONTENT_HINT_FLAGS,
0, CLUTTER_PARAM_READWRITE);
obj_props[PROP_INPUT_HINTS] = pspec;
g_object_class_install_property (gobject_class, PROP_INPUT_HINTS, pspec);
pspec = g_param_spec_enum ("input-purpose",
P_("Input purpose"),
P_("Input purpose"),
CLUTTER_TYPE_INPUT_CONTENT_PURPOSE,
0, CLUTTER_PARAM_READWRITE);
obj_props[PROP_INPUT_PURPOSE] = pspec;
g_object_class_install_property (gobject_class, PROP_INPUT_PURPOSE, pspec);
/** /**
* ClutterText::text-changed: * ClutterText::text-changed:
* @self: the #ClutterText that emitted the signal * @self: the #ClutterText that emitted the signal
@@ -4169,6 +4367,8 @@ clutter_text_init (ClutterText *self)
g_signal_connect (self, "notify::text-direction", g_signal_connect (self, "notify::text-direction",
G_CALLBACK (clutter_text_direction_changed_cb), G_CALLBACK (clutter_text_direction_changed_cb),
NULL); NULL);
priv->input_focus = clutter_text_input_focus_new (self);
} }
/** /**
@@ -4315,6 +4515,27 @@ buffer_deleted_text (ClutterTextBuffer *buffer,
} }
} }
static void
clutter_text_queue_redraw_or_relayout (ClutterText *self)
{
ClutterActor *actor = CLUTTER_ACTOR (self);
gfloat preferred_width;
gfloat preferred_height;
clutter_text_dirty_cache (self);
/* we're using our private implementations here to avoid the caching done by ClutterActor */
clutter_text_get_preferred_width (actor, -1, NULL, &preferred_width);
clutter_text_get_preferred_height (actor, preferred_width, NULL, &preferred_height);
if (clutter_actor_has_allocation (actor) &&
(fabsf (preferred_width - clutter_actor_get_width (actor)) > 0.001 ||
fabsf (preferred_height - clutter_actor_get_height (actor)) > 0.001))
clutter_actor_queue_relayout (actor);
else
clutter_text_queue_redraw (actor);
}
static void static void
buffer_notify_text (ClutterTextBuffer *buffer, buffer_notify_text (ClutterTextBuffer *buffer,
GParamSpec *spec, GParamSpec *spec,
@@ -4322,9 +4543,7 @@ buffer_notify_text (ClutterTextBuffer *buffer,
{ {
g_object_freeze_notify (G_OBJECT (self)); g_object_freeze_notify (G_OBJECT (self));
clutter_text_dirty_cache (self); clutter_text_queue_redraw_or_relayout (self);
clutter_actor_queue_relayout (CLUTTER_ACTOR (self));
g_signal_emit (self, text_signals[TEXT_CHANGED], 0); g_signal_emit (self, text_signals[TEXT_CHANGED], 0);
g_object_notify_by_pspec (G_OBJECT (self), obj_props[PROP_TEXT]); g_object_notify_by_pspec (G_OBJECT (self), obj_props[PROP_TEXT]);
@@ -4459,6 +4678,8 @@ void
clutter_text_set_editable (ClutterText *self, clutter_text_set_editable (ClutterText *self,
gboolean editable) gboolean editable)
{ {
ClutterBackend *backend = clutter_get_default_backend ();
ClutterInputMethod *method = clutter_backend_get_input_method (backend);
ClutterTextPrivate *priv; ClutterTextPrivate *priv;
g_return_if_fail (CLUTTER_IS_TEXT (self)); g_return_if_fail (CLUTTER_IS_TEXT (self));
@@ -4469,6 +4690,14 @@ clutter_text_set_editable (ClutterText *self,
{ {
priv->editable = editable; priv->editable = editable;
if (method)
{
if (!priv->editable && clutter_input_focus_is_focused (priv->input_focus))
clutter_input_method_focus_out (method);
else if (priv->has_focus)
clutter_input_method_focus_in (method, priv->input_focus);
}
clutter_text_queue_redraw (CLUTTER_ACTOR (self)); clutter_text_queue_redraw (CLUTTER_ACTOR (self));
g_object_notify_by_pspec (G_OBJECT (self), obj_props[PROP_EDITABLE]); g_object_notify_by_pspec (G_OBJECT (self), obj_props[PROP_EDITABLE]);
@@ -4666,8 +4895,7 @@ clutter_text_set_cursor_visible (ClutterText *self,
{ {
priv->cursor_visible = cursor_visible; priv->cursor_visible = cursor_visible;
clutter_text_dirty_cache (self); clutter_text_queue_redraw_or_relayout (self);
clutter_actor_queue_relayout (CLUTTER_ACTOR (self));
g_object_notify_by_pspec (G_OBJECT (self), obj_props[PROP_CURSOR_VISIBLE]); g_object_notify_by_pspec (G_OBJECT (self), obj_props[PROP_CURSOR_VISIBLE]);
} }
@@ -5568,9 +5796,7 @@ clutter_text_set_line_alignment (ClutterText *self,
{ {
priv->alignment = alignment; priv->alignment = alignment;
clutter_text_dirty_cache (self); clutter_text_queue_redraw_or_relayout (self);
clutter_actor_queue_relayout (CLUTTER_ACTOR (self));
g_object_notify_by_pspec (G_OBJECT (self), obj_props[PROP_LINE_ALIGNMENT]); g_object_notify_by_pspec (G_OBJECT (self), obj_props[PROP_LINE_ALIGNMENT]);
} }
@@ -5625,9 +5851,7 @@ clutter_text_set_use_markup (ClutterText *self,
if (setting) if (setting)
clutter_text_set_markup_internal (self, text); clutter_text_set_markup_internal (self, text);
clutter_text_dirty_cache (self); clutter_text_queue_redraw_or_relayout (self);
clutter_actor_queue_relayout (CLUTTER_ACTOR (self));
} }
/** /**
@@ -5674,9 +5898,7 @@ clutter_text_set_justify (ClutterText *self,
{ {
priv->justify = justify; priv->justify = justify;
clutter_text_dirty_cache (self); clutter_text_queue_redraw_or_relayout (self);
clutter_actor_queue_relayout (CLUTTER_ACTOR (self));
g_object_notify_by_pspec (G_OBJECT (self), obj_props[PROP_JUSTIFY]); g_object_notify_by_pspec (G_OBJECT (self), obj_props[PROP_JUSTIFY]);
} }
@@ -6243,8 +6465,7 @@ clutter_text_set_preedit_string (ClutterText *self,
priv->preedit_set = TRUE; priv->preedit_set = TRUE;
} }
clutter_text_dirty_cache (self); clutter_text_queue_redraw_or_relayout (self);
clutter_actor_queue_relayout (CLUTTER_ACTOR (self));
} }
@@ -6298,3 +6519,53 @@ clutter_text_get_cursor_rect (ClutterText *self,
*rect = self->priv->cursor_rect; *rect = self->priv->cursor_rect;
} }
void
clutter_text_set_input_hints (ClutterText *self,
ClutterInputContentHintFlags hints)
{
g_return_if_fail (CLUTTER_IS_TEXT (self));
self->priv->input_hints = hints;
if (clutter_input_focus_is_focused (self->priv->input_focus))
clutter_input_focus_set_content_hints (self->priv->input_focus, hints);
g_object_notify_by_pspec (G_OBJECT (self), obj_props[PROP_INPUT_HINTS]);
}
ClutterInputContentHintFlags
clutter_text_get_input_hints (ClutterText *self)
{
g_return_val_if_fail (CLUTTER_IS_TEXT (self), 0);
return self->priv->input_hints;
}
void
clutter_text_set_input_purpose (ClutterText *self,
ClutterInputContentPurpose purpose)
{
g_return_if_fail (CLUTTER_IS_TEXT (self));
self->priv->input_purpose = purpose;
if (clutter_input_focus_is_focused (self->priv->input_focus))
clutter_input_focus_set_content_purpose (self->priv->input_focus, purpose);
g_object_notify_by_pspec (G_OBJECT (self), obj_props[PROP_INPUT_PURPOSE]);
}
ClutterInputContentPurpose
clutter_text_get_input_purpose (ClutterText *self)
{
g_return_val_if_fail (CLUTTER_IS_TEXT (self), 0);
return self->priv->input_purpose;
}
gboolean
clutter_text_has_preedit (ClutterText *self)
{
g_return_val_if_fail (CLUTTER_IS_TEXT (self), FALSE);
return self->priv->preedit_set;
}

View File

@@ -302,6 +302,20 @@ void clutter_text_get_layout_offsets (ClutterText *
gint *x, gint *x,
gint *y); gint *y);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_text_set_input_hints (ClutterText *self,
ClutterInputContentHintFlags hints);
CLUTTER_AVAILABLE_IN_MUTTER
void clutter_text_set_input_purpose (ClutterText *self,
ClutterInputContentPurpose purpose);
CLUTTER_AVAILABLE_IN_MUTTER
ClutterInputContentHintFlags clutter_text_get_input_hints (ClutterText *self);
CLUTTER_AVAILABLE_IN_MUTTER
ClutterInputContentPurpose clutter_text_get_input_purpose (ClutterText *self);
CLUTTER_AVAILABLE_IN_MUTTER
gboolean clutter_text_has_preedit (ClutterText *self);
G_END_DECLS G_END_DECLS
#endif /* __CLUTTER_TEXT_H__ */ #endif /* __CLUTTER_TEXT_H__ */

View File

@@ -97,6 +97,9 @@ typedef struct _ClutterInputDeviceTool ClutterInputDeviceTool;
typedef struct _ClutterInputDevice ClutterInputDevice; typedef struct _ClutterInputDevice ClutterInputDevice;
typedef struct _ClutterVirtualInputDevice ClutterVirtualInputDevice; typedef struct _ClutterVirtualInputDevice ClutterVirtualInputDevice;
typedef struct _ClutterInputMethod ClutterInputMethod;
typedef struct _ClutterInputFocus ClutterInputFocus;
typedef CoglMatrix ClutterMatrix; typedef CoglMatrix ClutterMatrix;
typedef union _ClutterEvent ClutterEvent; typedef union _ClutterEvent ClutterEvent;

View File

@@ -128,6 +128,61 @@ clutter_virtual_input_device_notify_discrete_scroll (ClutterVirtualInputDevice *
direction, scroll_source); direction, scroll_source);
} }
void
clutter_virtual_input_device_notify_scroll_continuous (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
double dx,
double dy,
ClutterScrollSource scroll_source,
ClutterScrollFinishFlags finish_flags)
{
ClutterVirtualInputDeviceClass *klass =
CLUTTER_VIRTUAL_INPUT_DEVICE_GET_CLASS (virtual_device);
klass->notify_scroll_continuous (virtual_device, time_us,
dx, dy, scroll_source, finish_flags);
}
void
clutter_virtual_input_device_notify_touch_down (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int slot,
double x,
double y)
{
ClutterVirtualInputDeviceClass *klass =
CLUTTER_VIRTUAL_INPUT_DEVICE_GET_CLASS (virtual_device);
klass->notify_touch_down (virtual_device, time_us,
slot, x, y);
}
void
clutter_virtual_input_device_notify_touch_motion (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int slot,
double x,
double y)
{
ClutterVirtualInputDeviceClass *klass =
CLUTTER_VIRTUAL_INPUT_DEVICE_GET_CLASS (virtual_device);
klass->notify_touch_motion (virtual_device, time_us,
slot, x, y);
}
void
clutter_virtual_input_device_notify_touch_up (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int slot)
{
ClutterVirtualInputDeviceClass *klass =
CLUTTER_VIRTUAL_INPUT_DEVICE_GET_CLASS (virtual_device);
klass->notify_touch_up (virtual_device, time_us,
slot);
}
/** /**
* clutter_virtual_input_device_get_manager: * clutter_virtual_input_device_get_manager:
* @virtual_device: a virtual device * @virtual_device: a virtual device

View File

@@ -81,6 +81,29 @@ struct _ClutterVirtualInputDeviceClass
uint64_t time_us, uint64_t time_us,
ClutterScrollDirection direction, ClutterScrollDirection direction,
ClutterScrollSource scroll_source); ClutterScrollSource scroll_source);
void (*notify_scroll_continuous) (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
double dx,
double dy,
ClutterScrollSource scroll_source,
ClutterScrollFinishFlags finish_flags);
void (*notify_touch_down) (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int slot,
double x,
double y);
void (*notify_touch_motion) (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int slot,
double x,
double y);
void (*notify_touch_up) (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int slot);
}; };
CLUTTER_AVAILABLE_IN_ALL CLUTTER_AVAILABLE_IN_ALL
@@ -119,6 +142,32 @@ void clutter_virtual_input_device_notify_discrete_scroll (ClutterVirtualInputDev
ClutterScrollDirection direction, ClutterScrollDirection direction,
ClutterScrollSource scroll_source); ClutterScrollSource scroll_source);
CLUTTER_AVAILABLE_IN_ALL
void clutter_virtual_input_device_notify_scroll_continuous (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
double dx,
double dy,
ClutterScrollSource scroll_source,
ClutterScrollFinishFlags finish_flags);
CLUTTER_AVAILABLE_IN_ALL
void clutter_virtual_input_device_notify_touch_down (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int slot,
double x,
double y);
CLUTTER_AVAILABLE_IN_ALL
void clutter_virtual_input_device_notify_touch_motion (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int slot,
double x,
double y);
CLUTTER_AVAILABLE_IN_ALL
void clutter_virtual_input_device_notify_touch_up (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int slot);
CLUTTER_AVAILABLE_IN_ALL CLUTTER_AVAILABLE_IN_ALL
ClutterDeviceManager * clutter_virtual_input_device_get_manager (ClutterVirtualInputDevice *virtual_device); ClutterDeviceManager * clutter_virtual_input_device_get_manager (ClutterVirtualInputDevice *virtual_device);

View File

@@ -72,6 +72,8 @@
#include "clutter-image.h" #include "clutter-image.h"
#include "clutter-input-device.h" #include "clutter-input-device.h"
#include "clutter-input-device-tool.h" #include "clutter-input-device-tool.h"
#include "clutter-input-method.h"
#include "clutter-input-focus.h"
#include "clutter-interval.h" #include "clutter-interval.h"
#include "clutter-keyframe-transition.h" #include "clutter-keyframe-transition.h"
#include "clutter-keysyms.h" #include "clutter-keysyms.h"

View File

@@ -48,6 +48,7 @@
#include "clutter-private.h" #include "clutter-private.h"
#include "clutter-main.h" #include "clutter-main.h"
#include "clutter-stage-private.h" #include "clutter-stage-private.h"
#include "clutter-settings-private.h"
#ifdef COGL_HAS_EGL_SUPPORT #ifdef COGL_HAS_EGL_SUPPORT
#include "clutter-egl.h" #include "clutter-egl.h"
@@ -60,6 +61,8 @@ clutter_backend_egl_native_dispose (GObject *gobject)
{ {
ClutterBackendEglNative *backend_egl_native = CLUTTER_BACKEND_EGL_NATIVE (gobject); ClutterBackendEglNative *backend_egl_native = CLUTTER_BACKEND_EGL_NATIVE (gobject);
g_clear_object (&backend_egl_native->xsettings);
if (backend_egl_native->event_timer != NULL) if (backend_egl_native->event_timer != NULL)
{ {
g_timer_destroy (backend_egl_native->event_timer); g_timer_destroy (backend_egl_native->event_timer);
@@ -77,9 +80,181 @@ clutter_backend_egl_native_class_init (ClutterBackendEglNativeClass *klass)
gobject_class->dispose = clutter_backend_egl_native_dispose; gobject_class->dispose = clutter_backend_egl_native_dispose;
} }
typedef struct
{
cairo_antialias_t cairo_antialias;
gint clutter_font_antialias;
cairo_hint_style_t cairo_hint_style;
const char *clutter_font_hint_style;
cairo_subpixel_order_t cairo_subpixel_order;
const char *clutter_font_subpixel_order;
} FontSettings;
static void
get_font_gsettings (GSettings *xsettings,
FontSettings *output)
{
/* org.gnome.settings-daemon.GsdFontAntialiasingMode */
static const struct
{
cairo_antialias_t cairo_antialias;
gint clutter_font_antialias;
}
antialiasings[] =
{
/* none=0 */ {CAIRO_ANTIALIAS_NONE, 0},
/* grayscale=1 */ {CAIRO_ANTIALIAS_GRAY, 1},
/* rgba=2 */ {CAIRO_ANTIALIAS_SUBPIXEL, 1},
};
/* org.gnome.settings-daemon.GsdFontHinting */
static const struct
{
cairo_hint_style_t cairo_hint_style;
const char *clutter_font_hint_style;
}
hintings[] =
{
/* none=0 */ {CAIRO_HINT_STYLE_NONE, "hintnone"},
/* slight=1 */ {CAIRO_HINT_STYLE_SLIGHT, "hintslight"},
/* medium=2 */ {CAIRO_HINT_STYLE_MEDIUM, "hintmedium"},
/* full=3 */ {CAIRO_HINT_STYLE_FULL, "hintfull"},
};
/* org.gnome.settings-daemon.GsdFontRgbaOrder */
static const struct
{
cairo_subpixel_order_t cairo_subpixel_order;
const char *clutter_font_subpixel_order;
}
rgba_orders[] =
{
/* rgba=0 */ {CAIRO_SUBPIXEL_ORDER_RGB, "rgb"}, /* XXX what is 'rgba'? */
/* rgb=1 */ {CAIRO_SUBPIXEL_ORDER_RGB, "rgb"},
/* bgr=2 */ {CAIRO_SUBPIXEL_ORDER_BGR, "bgr"},
/* vrgb=3 */ {CAIRO_SUBPIXEL_ORDER_VRGB, "vrgb"},
/* vbgr=4 */ {CAIRO_SUBPIXEL_ORDER_VBGR, "vbgr"},
};
guint i;
i = g_settings_get_enum (xsettings, "hinting");
if (i < G_N_ELEMENTS (hintings))
{
output->cairo_hint_style = hintings[i].cairo_hint_style;
output->clutter_font_hint_style = hintings[i].clutter_font_hint_style;
}
else
{
output->cairo_hint_style = CAIRO_HINT_STYLE_DEFAULT;
output->clutter_font_hint_style = NULL;
}
i = g_settings_get_enum (xsettings, "antialiasing");
if (i < G_N_ELEMENTS (antialiasings))
{
output->cairo_antialias = antialiasings[i].cairo_antialias;
output->clutter_font_antialias = antialiasings[i].clutter_font_antialias;
}
else
{
output->cairo_antialias = CAIRO_ANTIALIAS_DEFAULT;
output->clutter_font_antialias = -1;
}
i = g_settings_get_enum (xsettings, "rgba-order");
if (i < G_N_ELEMENTS (rgba_orders))
{
output->cairo_subpixel_order = rgba_orders[i].cairo_subpixel_order;
output->clutter_font_subpixel_order = rgba_orders[i].clutter_font_subpixel_order;
}
else
{
output->cairo_subpixel_order = CAIRO_SUBPIXEL_ORDER_DEFAULT;
output->clutter_font_subpixel_order = NULL;
}
if (output->cairo_antialias == CAIRO_ANTIALIAS_GRAY)
output->clutter_font_subpixel_order = "none";
}
static void
init_font_options (ClutterBackendEglNative *backend_egl_native)
{
GSettings *xsettings = backend_egl_native->xsettings;
cairo_font_options_t *options = cairo_font_options_create ();
FontSettings fs;
get_font_gsettings (xsettings, &fs);
cairo_font_options_set_hint_style (options, fs.cairo_hint_style);
cairo_font_options_set_antialias (options, fs.cairo_antialias);
cairo_font_options_set_subpixel_order (options, fs.cairo_subpixel_order);
clutter_backend_set_font_options (CLUTTER_BACKEND (backend_egl_native),
options);
cairo_font_options_destroy (options);
}
static gboolean
on_xsettings_change_event (GSettings *xsettings,
gpointer keys,
gint n_keys,
gpointer user_data)
{
/*
* A simpler alternative to this function that does not update the screen
* immediately (like macOS :P):
*
* init_font_options (CLUTTER_BACKEND_EGL_NATIVE (user_data));
*
* which has the added benefit of eliminating the need for all the
* FontSettings.clutter_ fields. However the below approach is better for
* testing settings and more consistent with the existing x11 backend...
*/
ClutterSettings *csettings = clutter_settings_get_default ();
FontSettings fs;
gint hinting;
get_font_gsettings (xsettings, &fs);
hinting = fs.cairo_hint_style == CAIRO_HINT_STYLE_NONE ? 0 : 1;
g_object_set (csettings,
"font-hinting", hinting,
"font-hint-style", fs.clutter_font_hint_style,
"font-antialias", fs.clutter_font_antialias,
"font-subpixel-order", fs.clutter_font_subpixel_order,
NULL);
return FALSE;
}
static void static void
clutter_backend_egl_native_init (ClutterBackendEglNative *backend_egl_native) clutter_backend_egl_native_init (ClutterBackendEglNative *backend_egl_native)
{ {
static const gchar xsettings_path[] = "org.gnome.settings-daemon.plugins.xsettings";
GSettingsSchemaSource *source = g_settings_schema_source_get_default ();
GSettingsSchema *schema = g_settings_schema_source_lookup (source,
xsettings_path,
FALSE);
if (!schema)
{
g_warning ("Failed to find schema: %s", xsettings_path);
}
else
{
backend_egl_native->xsettings = g_settings_new_full (schema, NULL, NULL);
if (backend_egl_native->xsettings)
{
init_font_options (backend_egl_native);
g_signal_connect (backend_egl_native->xsettings, "change-event",
G_CALLBACK (on_xsettings_change_event),
backend_egl_native);
}
}
backend_egl_native->event_timer = g_timer_new (); backend_egl_native->event_timer = g_timer_new ();
} }

View File

@@ -61,6 +61,9 @@ struct _ClutterBackendEglNative
/* event timer */ /* event timer */
GTimer *event_timer; GTimer *event_timer;
/* "xsettings" is still the defacto place for Xft settings, even in Wayland */
GSettings *xsettings;
}; };
struct _ClutterBackendEglNativeClass struct _ClutterBackendEglNativeClass

View File

@@ -397,54 +397,6 @@ notify_relative_tool_motion (ClutterInputDevice *input_device,
queue_event (event); queue_event (event);
} }
static void
notify_touch_event (ClutterInputDevice *input_device,
ClutterEventType evtype,
guint64 time_us,
gint32 slot,
gdouble x,
gdouble y)
{
ClutterInputDeviceEvdev *device_evdev;
ClutterSeatEvdev *seat;
ClutterStage *stage;
ClutterEvent *event = NULL;
/* We can drop the event on the floor if no stage has been
* associated with the device yet. */
stage = _clutter_input_device_get_stage (input_device);
if (stage == NULL)
return;
device_evdev = CLUTTER_INPUT_DEVICE_EVDEV (input_device);
seat = _clutter_input_device_evdev_get_seat (device_evdev);
event = clutter_event_new (evtype);
_clutter_evdev_event_set_time_usec (event, time_us);
event->touch.time = us2ms (time_us);
event->touch.stage = CLUTTER_STAGE (stage);
event->touch.device = seat->core_pointer;
event->touch.x = x;
event->touch.y = y;
clutter_input_device_evdev_translate_coordinates (input_device, stage,
&event->touch.x,
&event->touch.y);
/* "NULL" sequences are special cased in clutter */
event->touch.sequence = GINT_TO_POINTER (slot + 1);
_clutter_xkb_translate_state (event, seat->xkb, seat->button_state);
if (evtype == CLUTTER_TOUCH_BEGIN ||
evtype == CLUTTER_TOUCH_UPDATE)
event->touch.modifier_state |= CLUTTER_BUTTON1_MASK;
clutter_event_set_device (event, seat->core_pointer);
clutter_event_set_source_device (event, input_device);
queue_event (event);
}
static void static void
notify_pinch_gesture_event (ClutterInputDevice *input_device, notify_pinch_gesture_event (ClutterInputDevice *input_device,
ClutterTouchpadGesturePhase phase, ClutterTouchpadGesturePhase phase,
@@ -841,10 +793,12 @@ evdev_add_device (ClutterDeviceManagerEvdev *manager_evdev,
if (priv->main_seat->libinput_seat == NULL) if (priv->main_seat->libinput_seat == NULL)
seat = priv->main_seat; seat = priv->main_seat;
else else
seat = clutter_seat_evdev_new (manager_evdev); {
seat = clutter_seat_evdev_new (manager_evdev);
priv->seats = g_slist_append (priv->seats, seat);
}
clutter_seat_evdev_set_libinput_seat (seat, libinput_seat); clutter_seat_evdev_set_libinput_seat (seat, libinput_seat);
priv->seats = g_slist_append (priv->seats, seat);
} }
device = _clutter_input_device_evdev_new (manager, seat, libinput_device); device = _clutter_input_device_evdev_new (manager, seat, libinput_device);
@@ -967,7 +921,6 @@ clutter_device_manager_evdev_get_device (ClutterDeviceManager *manager,
ClutterDeviceManagerEvdev *manager_evdev; ClutterDeviceManagerEvdev *manager_evdev;
ClutterDeviceManagerEvdevPrivate *priv; ClutterDeviceManagerEvdevPrivate *priv;
GSList *l; GSList *l;
GSList *device_it;
manager_evdev = CLUTTER_DEVICE_MANAGER_EVDEV (manager); manager_evdev = CLUTTER_DEVICE_MANAGER_EVDEV (manager);
priv = manager_evdev->priv; priv = manager_evdev->priv;
@@ -975,14 +928,10 @@ clutter_device_manager_evdev_get_device (ClutterDeviceManager *manager,
for (l = priv->seats; l; l = l->next) for (l = priv->seats; l; l = l->next)
{ {
ClutterSeatEvdev *seat = l->data; ClutterSeatEvdev *seat = l->data;
ClutterInputDevice *device = clutter_seat_evdev_get_device (seat, id);
for (device_it = seat->devices; device_it; device_it = device_it->next) if (device)
{ return device;
ClutterInputDevice *device = device_it->data;
if (clutter_input_device_get_device_id (device) == id)
return device;
}
} }
return NULL; return NULL;
@@ -1252,6 +1201,7 @@ process_device_event (ClutterDeviceManagerEvdev *manager_evdev,
gboolean handled = TRUE; gboolean handled = TRUE;
struct libinput_device *libinput_device = libinput_event_get_device(event); struct libinput_device *libinput_device = libinput_event_get_device(event);
ClutterInputDevice *device; ClutterInputDevice *device;
ClutterInputDeviceEvdev *device_evdev;
switch (libinput_event_get_type (event)) switch (libinput_event_get_type (event))
{ {
@@ -1408,7 +1358,7 @@ process_device_event (ClutterDeviceManagerEvdev *manager_evdev,
case LIBINPUT_EVENT_TOUCH_DOWN: case LIBINPUT_EVENT_TOUCH_DOWN:
{ {
gint32 slot; int device_slot;
guint64 time_us; guint64 time_us;
double x, y; double x, y;
gfloat stage_width, stage_height; gfloat stage_width, stage_height;
@@ -1419,7 +1369,8 @@ process_device_event (ClutterDeviceManagerEvdev *manager_evdev,
libinput_event_get_touch_event (event); libinput_event_get_touch_event (event);
device = libinput_device_get_user_data (libinput_device); device = libinput_device_get_user_data (libinput_device);
seat = _clutter_input_device_evdev_get_seat (CLUTTER_INPUT_DEVICE_EVDEV (device)); device_evdev = CLUTTER_INPUT_DEVICE_EVDEV (device);
seat = _clutter_input_device_evdev_get_seat (device_evdev);
stage = _clutter_input_device_get_stage (device); stage = _clutter_input_device_get_stage (device);
if (stage == NULL) if (stage == NULL)
@@ -1428,25 +1379,31 @@ process_device_event (ClutterDeviceManagerEvdev *manager_evdev,
stage_width = clutter_actor_get_width (CLUTTER_ACTOR (stage)); stage_width = clutter_actor_get_width (CLUTTER_ACTOR (stage));
stage_height = clutter_actor_get_height (CLUTTER_ACTOR (stage)); stage_height = clutter_actor_get_height (CLUTTER_ACTOR (stage));
slot = libinput_event_touch_get_slot (touch_event); device_slot = libinput_event_touch_get_slot (touch_event);
time_us = libinput_event_touch_get_time_usec (touch_event); time_us = libinput_event_touch_get_time_usec (touch_event);
x = libinput_event_touch_get_x_transformed (touch_event, x = libinput_event_touch_get_x_transformed (touch_event,
stage_width); stage_width);
y = libinput_event_touch_get_y_transformed (touch_event, y = libinput_event_touch_get_y_transformed (touch_event,
stage_height); stage_height);
touch_state = clutter_seat_evdev_add_touch (seat, slot); touch_state =
clutter_input_device_evdev_acquire_touch_state (device_evdev,
device_slot);
touch_state->coords.x = x; touch_state->coords.x = x;
touch_state->coords.y = y; touch_state->coords.y = y;
notify_touch_event (device, CLUTTER_TOUCH_BEGIN, time_us, slot, clutter_seat_evdev_notify_touch_event (seat, device,
touch_state->coords.x, touch_state->coords.y); CLUTTER_TOUCH_BEGIN,
time_us,
touch_state->seat_slot,
touch_state->coords.x,
touch_state->coords.y);
break; break;
} }
case LIBINPUT_EVENT_TOUCH_UP: case LIBINPUT_EVENT_TOUCH_UP:
{ {
gint32 slot; int device_slot;
guint64 time_us; guint64 time_us;
ClutterSeatEvdev *seat; ClutterSeatEvdev *seat;
ClutterTouchState *touch_state; ClutterTouchState *touch_state;
@@ -1454,22 +1411,30 @@ process_device_event (ClutterDeviceManagerEvdev *manager_evdev,
libinput_event_get_touch_event (event); libinput_event_get_touch_event (event);
device = libinput_device_get_user_data (libinput_device); device = libinput_device_get_user_data (libinput_device);
seat = _clutter_input_device_evdev_get_seat (CLUTTER_INPUT_DEVICE_EVDEV (device)); device_evdev = CLUTTER_INPUT_DEVICE_EVDEV (device);
seat = _clutter_input_device_evdev_get_seat (device_evdev);
slot = libinput_event_touch_get_slot (touch_event); device_slot = libinput_event_touch_get_slot (touch_event);
time_us = libinput_event_touch_get_time_usec (touch_event); time_us = libinput_event_touch_get_time_usec (touch_event);
touch_state = clutter_seat_evdev_get_touch (seat, slot); touch_state =
clutter_input_device_evdev_lookup_touch_state (device_evdev,
notify_touch_event (device, CLUTTER_TOUCH_END, time_us, slot, device_slot);
touch_state->coords.x, touch_state->coords.y); if (!touch_state)
clutter_seat_evdev_remove_touch (seat, slot); break;
clutter_seat_evdev_notify_touch_event (seat, device,
CLUTTER_TOUCH_END, time_us,
touch_state->seat_slot,
touch_state->coords.x,
touch_state->coords.y);
clutter_input_device_evdev_release_touch_state (device_evdev,
touch_state);
break; break;
} }
case LIBINPUT_EVENT_TOUCH_MOTION: case LIBINPUT_EVENT_TOUCH_MOTION:
{ {
gint32 slot; int device_slot;
guint64 time_us; guint64 time_us;
double x, y; double x, y;
gfloat stage_width, stage_height; gfloat stage_width, stage_height;
@@ -1480,7 +1445,8 @@ process_device_event (ClutterDeviceManagerEvdev *manager_evdev,
libinput_event_get_touch_event (event); libinput_event_get_touch_event (event);
device = libinput_device_get_user_data (libinput_device); device = libinput_device_get_user_data (libinput_device);
seat = _clutter_input_device_evdev_get_seat (CLUTTER_INPUT_DEVICE_EVDEV (device)); device_evdev = CLUTTER_INPUT_DEVICE_EVDEV (device);
seat = _clutter_input_device_evdev_get_seat (device_evdev);
stage = _clutter_input_device_get_stage (device); stage = _clutter_input_device_get_stage (device);
if (stage == NULL) if (stage == NULL)
@@ -1489,42 +1455,41 @@ process_device_event (ClutterDeviceManagerEvdev *manager_evdev,
stage_width = clutter_actor_get_width (CLUTTER_ACTOR (stage)); stage_width = clutter_actor_get_width (CLUTTER_ACTOR (stage));
stage_height = clutter_actor_get_height (CLUTTER_ACTOR (stage)); stage_height = clutter_actor_get_height (CLUTTER_ACTOR (stage));
slot = libinput_event_touch_get_slot (touch_event); device_slot = libinput_event_touch_get_slot (touch_event);
time_us = libinput_event_touch_get_time_usec (touch_event); time_us = libinput_event_touch_get_time_usec (touch_event);
x = libinput_event_touch_get_x_transformed (touch_event, x = libinput_event_touch_get_x_transformed (touch_event,
stage_width); stage_width);
y = libinput_event_touch_get_y_transformed (touch_event, y = libinput_event_touch_get_y_transformed (touch_event,
stage_height); stage_height);
touch_state = clutter_seat_evdev_get_touch (seat, slot); touch_state =
clutter_input_device_evdev_lookup_touch_state (device_evdev,
device_slot);
if (!touch_state)
break;
touch_state->coords.x = x; touch_state->coords.x = x;
touch_state->coords.y = y; touch_state->coords.y = y;
notify_touch_event (device, CLUTTER_TOUCH_UPDATE, time_us, slot, clutter_seat_evdev_notify_touch_event (seat, device,
touch_state->coords.x, touch_state->coords.y); CLUTTER_TOUCH_UPDATE,
time_us,
touch_state->seat_slot,
touch_state->coords.x,
touch_state->coords.y);
break; break;
} }
case LIBINPUT_EVENT_TOUCH_CANCEL: case LIBINPUT_EVENT_TOUCH_CANCEL:
{ {
ClutterTouchState *touch_state;
GHashTableIter iter;
guint64 time_us; guint64 time_us;
struct libinput_event_touch *touch_event = struct libinput_event_touch *touch_event =
libinput_event_get_touch_event (event); libinput_event_get_touch_event (event);
ClutterSeatEvdev *seat;
device = libinput_device_get_user_data (libinput_device); device = libinput_device_get_user_data (libinput_device);
device_evdev = CLUTTER_INPUT_DEVICE_EVDEV (device);
time_us = libinput_event_touch_get_time_usec (touch_event); time_us = libinput_event_touch_get_time_usec (touch_event);
seat = _clutter_input_device_evdev_get_seat (CLUTTER_INPUT_DEVICE_EVDEV (device));
g_hash_table_iter_init (&iter, seat->touches);
while (g_hash_table_iter_next (&iter, NULL, (gpointer*) &touch_state)) clutter_input_device_evdev_release_touch_slots (device_evdev, time_us);
{
notify_touch_event (device, CLUTTER_TOUCH_CANCEL,
time_us, touch_state->id,
touch_state->coords.x, touch_state->coords.y);
g_hash_table_iter_remove (&iter);
}
break; break;
} }
@@ -1898,6 +1863,14 @@ clutter_device_manager_evdev_create_virtual_device (ClutterDeviceManager *manag
NULL); NULL);
} }
static ClutterVirtualDeviceType
clutter_device_manager_evdev_get_supported_virtual_device_types (ClutterDeviceManager *device_manager)
{
return (CLUTTER_VIRTUAL_DEVICE_TYPE_KEYBOARD |
CLUTTER_VIRTUAL_DEVICE_TYPE_POINTER |
CLUTTER_VIRTUAL_DEVICE_TYPE_TOUCHSCREEN);
}
static void static void
clutter_device_manager_evdev_compress_motion (ClutterDeviceManager *device_manger, clutter_device_manager_evdev_compress_motion (ClutterDeviceManager *device_manger,
ClutterEvent *event, ClutterEvent *event,
@@ -1923,6 +1896,18 @@ clutter_device_manager_evdev_compress_motion (ClutterDeviceManager *device_mange
dy_unaccel + dst_dy_unaccel); dy_unaccel + dst_dy_unaccel);
} }
static void
clutter_device_manager_evdev_apply_kbd_a11y_settings (ClutterDeviceManager *device_manager,
ClutterKbdA11ySettings *settings)
{
ClutterInputDevice *device;
device = clutter_device_manager_evdev_get_core_device (device_manager, CLUTTER_KEYBOARD_DEVICE);
if (device)
clutter_input_device_evdev_apply_kbd_a11y_settings (CLUTTER_INPUT_DEVICE_EVDEV (device),
settings);
}
/* /*
* GObject implementation * GObject implementation
*/ */
@@ -1979,6 +1964,7 @@ clutter_device_manager_evdev_constructed (GObject *gobject)
xkb_context_unref (ctx); xkb_context_unref (ctx);
priv->main_seat = clutter_seat_evdev_new (manager_evdev); priv->main_seat = clutter_seat_evdev_new (manager_evdev);
priv->seats = g_slist_append (priv->seats, priv->main_seat);
dispatch_libinput (manager_evdev); dispatch_libinput (manager_evdev);
@@ -2064,7 +2050,9 @@ clutter_device_manager_evdev_class_init (ClutterDeviceManagerEvdevClass *klass)
manager_class->get_core_device = clutter_device_manager_evdev_get_core_device; manager_class->get_core_device = clutter_device_manager_evdev_get_core_device;
manager_class->get_device = clutter_device_manager_evdev_get_device; manager_class->get_device = clutter_device_manager_evdev_get_device;
manager_class->create_virtual_device = clutter_device_manager_evdev_create_virtual_device; manager_class->create_virtual_device = clutter_device_manager_evdev_create_virtual_device;
manager_class->get_supported_virtual_device_types = clutter_device_manager_evdev_get_supported_virtual_device_types;
manager_class->compress_motion = clutter_device_manager_evdev_compress_motion; manager_class->compress_motion = clutter_device_manager_evdev_compress_motion;
manager_class->apply_kbd_a11y_settings = clutter_device_manager_evdev_apply_kbd_a11y_settings;
} }
static void static void
@@ -2185,7 +2173,7 @@ _clutter_device_manager_evdev_acquire_device_id (ClutterDeviceManagerEvdev *mana
first = g_list_first (priv->free_device_ids); first = g_list_first (priv->free_device_ids);
next_id = GPOINTER_TO_INT (first->data); next_id = GPOINTER_TO_INT (first->data);
priv->free_device_ids = g_list_remove_link (priv->free_device_ids, first); priv->free_device_ids = g_list_delete_link (priv->free_device_ids, first);
return next_id; return next_id;
} }
@@ -2304,7 +2292,7 @@ clutter_evdev_update_xkb_state (ClutterDeviceManagerEvdev *manager_evdev)
0, /* depressed */ 0, /* depressed */
latched_mods, latched_mods,
locked_mods, locked_mods,
0, 0, 0); 0, 0, seat->layout_idx);
seat->caps_lock_led = xkb_keymap_led_get_index (priv->keymap, XKB_LED_NAME_CAPS); seat->caps_lock_led = xkb_keymap_led_get_index (priv->keymap, XKB_LED_NAME_CAPS);
seat->num_lock_led = xkb_keymap_led_get_index (priv->keymap, XKB_LED_NAME_NUM); seat->num_lock_led = xkb_keymap_led_get_index (priv->keymap, XKB_LED_NAME_NUM);
@@ -2452,6 +2440,7 @@ clutter_evdev_set_keyboard_layout_index (ClutterDeviceManager *evdev,
xkb_mod_mask_t latched_mods; xkb_mod_mask_t latched_mods;
xkb_mod_mask_t locked_mods; xkb_mod_mask_t locked_mods;
struct xkb_state *state; struct xkb_state *state;
GSList *l;
g_return_if_fail (CLUTTER_IS_DEVICE_MANAGER_EVDEV (evdev)); g_return_if_fail (CLUTTER_IS_DEVICE_MANAGER_EVDEV (evdev));
@@ -2463,6 +2452,12 @@ clutter_evdev_set_keyboard_layout_index (ClutterDeviceManager *evdev,
locked_mods = xkb_state_serialize_mods (state, XKB_STATE_MODS_LOCKED); locked_mods = xkb_state_serialize_mods (state, XKB_STATE_MODS_LOCKED);
xkb_state_update_mask (state, depressed_mods, latched_mods, locked_mods, 0, 0, idx); xkb_state_update_mask (state, depressed_mods, latched_mods, locked_mods, 0, 0, idx);
for (l = manager_evdev->priv->seats; l; l = l->next)
{
ClutterSeatEvdev *seat = l->data;
seat->layout_idx = idx;
}
} }
/** /**
@@ -2472,12 +2467,9 @@ xkb_layout_index_t
clutter_evdev_get_keyboard_layout_index (ClutterDeviceManager *evdev) clutter_evdev_get_keyboard_layout_index (ClutterDeviceManager *evdev)
{ {
ClutterDeviceManagerEvdev *manager_evdev; ClutterDeviceManagerEvdev *manager_evdev;
struct xkb_state *state;
manager_evdev = CLUTTER_DEVICE_MANAGER_EVDEV (evdev); manager_evdev = CLUTTER_DEVICE_MANAGER_EVDEV (evdev);
state = manager_evdev->priv->main_seat->xkb; return manager_evdev->priv->main_seat->layout_idx;
return xkb_state_serialize_layout (state, XKB_STATE_LAYOUT_LOCKED);
} }
/** /**

File diff suppressed because it is too large Load Diff

View File

@@ -70,6 +70,31 @@ struct _ClutterInputDeviceEvdev
cairo_matrix_t device_matrix; cairo_matrix_t device_matrix;
gdouble device_aspect_ratio; /* w:h */ gdouble device_aspect_ratio; /* w:h */
gdouble output_ratio; /* w:h */ gdouble output_ratio; /* w:h */
GHashTable *touches;
/* Keyboard a11y */
ClutterKeyboardA11yFlags a11y_flags;
GList *slow_keys_list;
guint debounce_timer;
guint16 debounce_key;
xkb_mod_mask_t stickykeys_depressed_mask;
xkb_mod_mask_t stickykeys_latched_mask;
xkb_mod_mask_t stickykeys_locked_mask;
guint toggle_slowkeys_timer;
guint16 shift_count;
guint32 last_shift_time;
gint mousekeys_btn;
gboolean mousekeys_btn_states[3];
guint32 mousekeys_first_motion_time; /* ms */
guint32 mousekeys_last_motion_time; /* ms */
guint mousekeys_init_delay;
guint mousekeys_accel_time;
guint mousekeys_max_speed;
gdouble mousekeys_curve_factor;
guint move_mousekeys_timer;
guint16 last_mousekeys_key;
ClutterVirtualInputDevice *mousekeys_virtual_device;
}; };
GType _clutter_input_device_evdev_get_type (void) G_GNUC_CONST; GType _clutter_input_device_evdev_get_type (void) G_GNUC_CONST;
@@ -111,6 +136,22 @@ void clutter_input_device_evdev_translate_coordinates (Clut
gfloat *x, gfloat *x,
gfloat *y); gfloat *y);
void clutter_input_device_evdev_apply_kbd_a11y_settings (ClutterInputDeviceEvdev *device,
ClutterKbdA11ySettings *settings);
ClutterTouchState * clutter_input_device_evdev_acquire_touch_state (ClutterInputDeviceEvdev *device,
int device_slot);
ClutterTouchState * clutter_input_device_evdev_lookup_touch_state (ClutterInputDeviceEvdev *device,
int device_slot);
void clutter_input_device_evdev_release_touch_state (ClutterInputDeviceEvdev *device,
ClutterTouchState *touch_state);
void clutter_input_device_evdev_release_touch_slots (ClutterInputDeviceEvdev *device_evdev,
uint64_t time_us);
G_END_DECLS G_END_DECLS
#endif /* __CLUTTER_INPUT_DEVICE_EVDEV_H__ */ #endif /* __CLUTTER_INPUT_DEVICE_EVDEV_H__ */

View File

@@ -45,6 +45,10 @@
#define DISCRETE_SCROLL_STEP 10.0 #define DISCRETE_SCROLL_STEP 10.0
#ifndef BTN_STYLUS3
#define BTN_STYLUS3 0x149 /* Linux 4.15 */
#endif
void void
clutter_seat_evdev_set_libinput_seat (ClutterSeatEvdev *seat, clutter_seat_evdev_set_libinput_seat (ClutterSeatEvdev *seat,
struct libinput_seat *libinput_seat) struct libinput_seat *libinput_seat)
@@ -88,32 +92,57 @@ clutter_touch_state_free (ClutterTouchState *touch_state)
g_slice_free (ClutterTouchState, touch_state); g_slice_free (ClutterTouchState, touch_state);
} }
ClutterTouchState * static void
clutter_seat_evdev_add_touch (ClutterSeatEvdev *seat, ensure_seat_slot_allocated (ClutterSeatEvdev *seat,
guint32 id) int seat_slot)
{ {
ClutterTouchState *touch; if (seat_slot >= seat->n_alloc_touch_states)
{
const int size_increase = 5;
int i;
touch = g_slice_new0 (ClutterTouchState); seat->n_alloc_touch_states += size_increase;
touch->id = id; seat->touch_states = g_realloc_n (seat->touch_states,
seat->n_alloc_touch_states,
sizeof (ClutterTouchState *));
for (i = 0; i < size_increase; i++)
seat->touch_states[seat->n_alloc_touch_states - (i + 1)] = NULL;
}
}
g_hash_table_insert (seat->touches, GUINT_TO_POINTER (id), touch); ClutterTouchState *
clutter_seat_evdev_acquire_touch_state (ClutterSeatEvdev *seat,
int device_slot)
{
ClutterTouchState *touch_state;
int seat_slot;
return touch; for (seat_slot = 0; seat_slot < seat->n_alloc_touch_states; seat_slot++)
{
if (!seat->touch_states[seat_slot])
break;
}
ensure_seat_slot_allocated (seat, seat_slot);
touch_state = g_slice_new0 (ClutterTouchState);
*touch_state = (ClutterTouchState) {
.seat = seat,
.seat_slot = seat_slot,
.device_slot = device_slot,
};
seat->touch_states[seat_slot] = touch_state;
return touch_state;
} }
void void
clutter_seat_evdev_remove_touch (ClutterSeatEvdev *seat, clutter_seat_evdev_release_touch_state (ClutterSeatEvdev *seat,
guint32 id) ClutterTouchState *touch_state)
{ {
g_hash_table_remove (seat->touches, GUINT_TO_POINTER (id)); g_clear_pointer (&seat->touch_states[touch_state->seat_slot],
} (GDestroyNotify) clutter_touch_state_free);
ClutterTouchState *
clutter_seat_evdev_get_touch (ClutterSeatEvdev *seat,
guint32 id)
{
return g_hash_table_lookup (seat->touches, GUINT_TO_POINTER (id));
} }
ClutterSeatEvdev * ClutterSeatEvdev *
@@ -150,9 +179,6 @@ clutter_seat_evdev_new (ClutterDeviceManagerEvdev *manager_evdev)
_clutter_device_manager_add_device (manager, device); _clutter_device_manager_add_device (manager, device);
seat->core_keyboard = device; seat->core_keyboard = device;
seat->touches = g_hash_table_new_full (NULL, NULL, NULL,
(GDestroyNotify) clutter_touch_state_free);
seat->repeat = TRUE; seat->repeat = TRUE;
seat->repeat_delay = 250; /* ms */ seat->repeat_delay = 250; /* ms */
seat->repeat_interval = 33; /* ms */ seat->repeat_interval = 33; /* ms */
@@ -492,6 +518,10 @@ clutter_seat_evdev_notify_button (ClutterSeatEvdev *seat,
button_nr = CLUTTER_BUTTON_MIDDLE; button_nr = CLUTTER_BUTTON_MIDDLE;
break; break;
case 0x149: /* BTN_STYLUS3 */
button_nr = 8;
break;
default: default:
/* For compatibility reasons, all additional buttons go after the old 4-7 scroll ones */ /* For compatibility reasons, all additional buttons go after the old 4-7 scroll ones */
if (clutter_input_device_get_device_type (input_device) == CLUTTER_TABLET_DEVICE) if (clutter_input_device_get_device_type (input_device) == CLUTTER_TABLET_DEVICE)
@@ -760,6 +790,50 @@ clutter_seat_evdev_notify_discrete_scroll (ClutterSeatEvdev *seat,
} }
void
clutter_seat_evdev_notify_touch_event (ClutterSeatEvdev *seat,
ClutterInputDevice *input_device,
ClutterEventType evtype,
uint64_t time_us,
int slot,
double x,
double y)
{
ClutterStage *stage;
ClutterEvent *event = NULL;
/* We can drop the event on the floor if no stage has been
* associated with the device yet. */
stage = _clutter_input_device_get_stage (input_device);
if (stage == NULL)
return;
event = clutter_event_new (evtype);
_clutter_evdev_event_set_time_usec (event, time_us);
event->touch.time = us2ms (time_us);
event->touch.stage = CLUTTER_STAGE (stage);
event->touch.device = seat->core_pointer;
event->touch.x = x;
event->touch.y = y;
clutter_input_device_evdev_translate_coordinates (input_device, stage,
&event->touch.x,
&event->touch.y);
/* "NULL" sequences are special cased in clutter */
event->touch.sequence = GINT_TO_POINTER (MAX (1, slot + 1));
_clutter_xkb_translate_state (event, seat->xkb, seat->button_state);
if (evtype == CLUTTER_TOUCH_BEGIN ||
evtype == CLUTTER_TOUCH_UPDATE)
event->touch.modifier_state |= CLUTTER_BUTTON1_MASK;
clutter_event_set_device (event, seat->core_pointer);
clutter_event_set_source_device (event, input_device);
queue_event (event);
}
void void
clutter_seat_evdev_free (ClutterSeatEvdev *seat) clutter_seat_evdev_free (ClutterSeatEvdev *seat)
{ {
@@ -772,7 +846,7 @@ clutter_seat_evdev_free (ClutterSeatEvdev *seat)
g_object_unref (device); g_object_unref (device);
} }
g_slist_free (seat->devices); g_slist_free (seat->devices);
g_hash_table_unref (seat->touches); g_free (seat->touch_states);
xkb_state_unref (seat->xkb); xkb_state_unref (seat->xkb);
@@ -784,6 +858,24 @@ clutter_seat_evdev_free (ClutterSeatEvdev *seat)
g_free (seat); g_free (seat);
} }
ClutterInputDevice *
clutter_seat_evdev_get_device (ClutterSeatEvdev *seat,
gint id)
{
ClutterInputDevice *device;
GSList *l;
for (l = seat->devices; l; l = l->next)
{
device = l->data;
if (clutter_input_device_get_device_id (device) == id)
return device;
}
return NULL;
}
void void
clutter_seat_evdev_set_stage (ClutterSeatEvdev *seat, clutter_seat_evdev_set_stage (ClutterSeatEvdev *seat,
ClutterStage *stage) ClutterStage *stage)

View File

@@ -38,7 +38,10 @@ typedef struct _ClutterTouchState ClutterTouchState;
struct _ClutterTouchState struct _ClutterTouchState
{ {
guint32 id; ClutterSeatEvdev *seat;
int device_slot;
int seat_slot;
ClutterPoint coords; ClutterPoint coords;
}; };
@@ -52,12 +55,14 @@ struct _ClutterSeatEvdev
ClutterInputDevice *core_pointer; ClutterInputDevice *core_pointer;
ClutterInputDevice *core_keyboard; ClutterInputDevice *core_keyboard;
GHashTable *touches; ClutterTouchState **touch_states;
int n_alloc_touch_states;
struct xkb_state *xkb; struct xkb_state *xkb;
xkb_led_index_t caps_lock_led; xkb_led_index_t caps_lock_led;
xkb_led_index_t num_lock_led; xkb_led_index_t num_lock_led;
xkb_led_index_t scroll_lock_led; xkb_led_index_t scroll_lock_led;
xkb_layout_index_t layout_idx;
uint32_t button_state; uint32_t button_state;
int button_count[KEY_CNT]; int button_count[KEY_CNT];
@@ -121,16 +126,27 @@ void clutter_seat_evdev_notify_discrete_scroll (ClutterSeatEvdev *seat,
double discrete_dy, double discrete_dy,
ClutterScrollSource source); ClutterScrollSource source);
void clutter_seat_evdev_notify_touch_event (ClutterSeatEvdev *seat,
ClutterInputDevice *input_device,
ClutterEventType evtype,
uint64_t time_us,
int slot,
double x,
double y);
void clutter_seat_evdev_set_libinput_seat (ClutterSeatEvdev *seat, void clutter_seat_evdev_set_libinput_seat (ClutterSeatEvdev *seat,
struct libinput_seat *libinput_seat); struct libinput_seat *libinput_seat);
void clutter_seat_evdev_sync_leds (ClutterSeatEvdev *seat); void clutter_seat_evdev_sync_leds (ClutterSeatEvdev *seat);
ClutterTouchState * clutter_seat_evdev_add_touch (ClutterSeatEvdev *seat, ClutterInputDevice * clutter_seat_evdev_get_device (ClutterSeatEvdev *seat,
guint32 id); gint id);
void clutter_seat_evdev_remove_touch (ClutterSeatEvdev *seat, ClutterTouchState * clutter_seat_evdev_acquire_touch_state (ClutterSeatEvdev *seat,
guint32 id); int device_slot);
void clutter_seat_evdev_release_touch_state (ClutterSeatEvdev *seat,
ClutterTouchState *touch_state);
ClutterTouchState * clutter_seat_evdev_get_touch (ClutterSeatEvdev *seat, ClutterTouchState * clutter_seat_evdev_get_touch (ClutterSeatEvdev *seat,
guint32 id); guint32 id);

View File

@@ -448,6 +448,124 @@ clutter_virtual_input_device_evdev_notify_discrete_scroll (ClutterVirtualInputDe
scroll_source); scroll_source);
} }
static void
clutter_virtual_input_device_evdev_notify_scroll_continuous (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
double dx,
double dy,
ClutterScrollSource scroll_source,
ClutterScrollFinishFlags finish_flags)
{
ClutterVirtualInputDeviceEvdev *virtual_evdev =
CLUTTER_VIRTUAL_INPUT_DEVICE_EVDEV (virtual_device);
if (time_us == CLUTTER_CURRENT_TIME)
time_us = g_get_monotonic_time ();
clutter_seat_evdev_notify_scroll_continuous (virtual_evdev->seat,
virtual_evdev->device,
time_us,
dx, dy,
scroll_source,
CLUTTER_SCROLL_FINISHED_NONE);
}
static void
clutter_virtual_input_device_evdev_notify_touch_down (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int device_slot,
double x,
double y)
{
ClutterVirtualInputDeviceEvdev *virtual_evdev =
CLUTTER_VIRTUAL_INPUT_DEVICE_EVDEV (virtual_device);
ClutterInputDeviceEvdev *device_evdev =
CLUTTER_INPUT_DEVICE_EVDEV (virtual_evdev->device);
ClutterTouchState *touch_state;
if (time_us == CLUTTER_CURRENT_TIME)
time_us = g_get_monotonic_time ();
touch_state = clutter_input_device_evdev_acquire_touch_state (device_evdev,
device_slot);
if (!touch_state)
return;
touch_state->coords.x = x;
touch_state->coords.y = y;
clutter_seat_evdev_notify_touch_event (virtual_evdev->seat,
virtual_evdev->device,
CLUTTER_TOUCH_BEGIN,
time_us,
touch_state->seat_slot,
touch_state->coords.x,
touch_state->coords.y);
}
static void
clutter_virtual_input_device_evdev_notify_touch_motion (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int device_slot,
double x,
double y)
{
ClutterVirtualInputDeviceEvdev *virtual_evdev =
CLUTTER_VIRTUAL_INPUT_DEVICE_EVDEV (virtual_device);
ClutterInputDeviceEvdev *device_evdev =
CLUTTER_INPUT_DEVICE_EVDEV (virtual_evdev->device);
ClutterTouchState *touch_state;
if (time_us == CLUTTER_CURRENT_TIME)
time_us = g_get_monotonic_time ();
touch_state = clutter_input_device_evdev_lookup_touch_state (device_evdev,
device_slot);
if (!touch_state)
return;
touch_state->coords.x = x;
touch_state->coords.y = y;
clutter_seat_evdev_notify_touch_event (virtual_evdev->seat,
virtual_evdev->device,
CLUTTER_TOUCH_BEGIN,
time_us,
touch_state->seat_slot,
touch_state->coords.x,
touch_state->coords.y);
}
static void
clutter_virtual_input_device_evdev_notify_touch_up (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int device_slot)
{
ClutterVirtualInputDeviceEvdev *virtual_evdev =
CLUTTER_VIRTUAL_INPUT_DEVICE_EVDEV (virtual_device);
ClutterInputDeviceEvdev *device_evdev =
CLUTTER_INPUT_DEVICE_EVDEV (virtual_evdev->device);
ClutterTouchState *touch_state;
if (time_us == CLUTTER_CURRENT_TIME)
time_us = g_get_monotonic_time ();
touch_state = clutter_input_device_evdev_lookup_touch_state (device_evdev,
device_slot);
if (!touch_state)
return;
clutter_seat_evdev_notify_touch_event (virtual_evdev->seat,
virtual_evdev->device,
CLUTTER_TOUCH_BEGIN,
time_us,
touch_state->seat_slot,
touch_state->coords.x,
touch_state->coords.y);
clutter_input_device_evdev_release_touch_state (device_evdev, touch_state);
}
static void static void
clutter_virtual_input_device_evdev_get_property (GObject *object, clutter_virtual_input_device_evdev_get_property (GObject *object,
guint prop_id, guint prop_id,
@@ -552,6 +670,10 @@ clutter_virtual_input_device_evdev_class_init (ClutterVirtualInputDeviceEvdevCla
virtual_input_device_class->notify_key = clutter_virtual_input_device_evdev_notify_key; virtual_input_device_class->notify_key = clutter_virtual_input_device_evdev_notify_key;
virtual_input_device_class->notify_keyval = clutter_virtual_input_device_evdev_notify_keyval; virtual_input_device_class->notify_keyval = clutter_virtual_input_device_evdev_notify_keyval;
virtual_input_device_class->notify_discrete_scroll = clutter_virtual_input_device_evdev_notify_discrete_scroll; virtual_input_device_class->notify_discrete_scroll = clutter_virtual_input_device_evdev_notify_discrete_scroll;
virtual_input_device_class->notify_scroll_continuous = clutter_virtual_input_device_evdev_notify_scroll_continuous;
virtual_input_device_class->notify_touch_down = clutter_virtual_input_device_evdev_notify_touch_down;
virtual_input_device_class->notify_touch_motion = clutter_virtual_input_device_evdev_notify_touch_motion;
virtual_input_device_class->notify_touch_up = clutter_virtual_input_device_evdev_notify_touch_up;
obj_props[PROP_SEAT] = g_param_spec_pointer ("seat", obj_props[PROP_SEAT] = g_param_spec_pointer ("seat",
P_("ClutterSeatEvdev"), P_("ClutterSeatEvdev"),

View File

@@ -109,7 +109,6 @@ static const gchar *atom_names[] = {
#define N_ATOM_NAMES G_N_ELEMENTS (atom_names) #define N_ATOM_NAMES G_N_ELEMENTS (atom_names)
/* various flags corresponding to pre init setup calls */ /* various flags corresponding to pre init setup calls */
static gboolean _want_reset_on_video_memory_purge = FALSE;
static gboolean _no_xevent_retrieval = FALSE; static gboolean _no_xevent_retrieval = FALSE;
static gboolean clutter_enable_xinput = TRUE; static gboolean clutter_enable_xinput = TRUE;
static gboolean clutter_enable_argb = FALSE; static gboolean clutter_enable_argb = FALSE;
@@ -682,8 +681,7 @@ clutter_backend_x11_get_renderer (ClutterBackend *backend,
/* set the display object we're using */ /* set the display object we're using */
cogl_xlib_renderer_set_foreign_display (renderer, xdisplay); cogl_xlib_renderer_set_foreign_display (renderer, xdisplay);
cogl_xlib_renderer_request_reset_on_video_memory_purge (renderer,
_want_reset_on_video_memory_purge);
return renderer; return renderer;
} }
@@ -1028,30 +1026,6 @@ clutter_x11_has_event_retrieval (void)
return !_no_xevent_retrieval; return !_no_xevent_retrieval;
} }
/**
* clutter_x11_request_reset_on_video_memory_purge:
*
* If the GL driver supports the NV_robustness_video_memory_purge
* extension, this call lets applications request that it gets
* initialized, thus allowing cogl_get_graphics_reset_status() to
* report memory purged errors if they happen. Checking for the
* graphics reset status is the application's responsibility.
*
* This function can only be called before calling clutter_init().
*/
void
clutter_x11_request_reset_on_video_memory_purge (void)
{
if (_clutter_context_is_initialized ())
{
g_warning ("%s() can only be used before calling clutter_init()",
G_STRFUNC);
return;
}
_want_reset_on_video_memory_purge = TRUE;
}
/** /**
* clutter_x11_get_default_screen: * clutter_x11_get_default_screen:
* *

View File

@@ -37,6 +37,7 @@
#include "clutter-event-translator.h" #include "clutter-event-translator.h"
#include "clutter-stage-private.h" #include "clutter-stage-private.h"
#include "clutter-private.h" #include "clutter-private.h"
#include "clutter-xkb-a11y-x11.h"
enum enum
{ {
@@ -352,9 +353,11 @@ static void
clutter_device_manager_x11_constructed (GObject *gobject) clutter_device_manager_x11_constructed (GObject *gobject)
{ {
ClutterDeviceManagerX11 *manager_x11; ClutterDeviceManagerX11 *manager_x11;
ClutterDeviceManager *manager;
ClutterBackendX11 *backend_x11; ClutterBackendX11 *backend_x11;
manager_x11 = CLUTTER_DEVICE_MANAGER_X11 (gobject); manager_x11 = CLUTTER_DEVICE_MANAGER_X11 (gobject);
manager = CLUTTER_DEVICE_MANAGER (gobject);
g_object_get (gobject, "backend", &backend_x11, NULL); g_object_get (gobject, "backend", &backend_x11, NULL);
g_assert (backend_x11 != NULL); g_assert (backend_x11 != NULL);
@@ -389,6 +392,8 @@ clutter_device_manager_x11_constructed (GObject *gobject)
_clutter_input_device_set_associated_device (manager_x11->core_keyboard, _clutter_input_device_set_associated_device (manager_x11->core_keyboard,
manager_x11->core_pointer); manager_x11->core_pointer);
clutter_device_manager_x11_a11y_init (manager);
if (G_OBJECT_CLASS (clutter_device_manager_x11_parent_class)->constructed) if (G_OBJECT_CLASS (clutter_device_manager_x11_parent_class)->constructed)
G_OBJECT_CLASS (clutter_device_manager_x11_parent_class)->constructed (gobject); G_OBJECT_CLASS (clutter_device_manager_x11_parent_class)->constructed (gobject);
} }
@@ -485,6 +490,13 @@ clutter_device_manager_x11_create_virtual_device (ClutterDeviceManager *device_
return g_object_new (CLUTTER_TYPE_VIRTUAL_INPUT_DEVICE_X11, NULL); return g_object_new (CLUTTER_TYPE_VIRTUAL_INPUT_DEVICE_X11, NULL);
} }
static ClutterVirtualDeviceType
clutter_device_manager_x11_get_supported_virtual_device_types (ClutterDeviceManager *device_manager)
{
return (CLUTTER_VIRTUAL_DEVICE_TYPE_KEYBOARD |
CLUTTER_VIRTUAL_DEVICE_TYPE_POINTER);
}
static void static void
clutter_device_manager_x11_set_property (GObject *gobject, clutter_device_manager_x11_set_property (GObject *gobject,
guint prop_id, guint prop_id,
@@ -532,6 +544,8 @@ clutter_device_manager_x11_class_init (ClutterDeviceManagerX11Class *klass)
manager_class->get_core_device = clutter_device_manager_x11_get_core_device; manager_class->get_core_device = clutter_device_manager_x11_get_core_device;
manager_class->get_device = clutter_device_manager_x11_get_device; manager_class->get_device = clutter_device_manager_x11_get_device;
manager_class->create_virtual_device = clutter_device_manager_x11_create_virtual_device; manager_class->create_virtual_device = clutter_device_manager_x11_create_virtual_device;
manager_class->get_supported_virtual_device_types = clutter_device_manager_x11_get_supported_virtual_device_types;
manager_class->apply_kbd_a11y_settings = clutter_device_manager_x11_apply_kbd_a11y_settings;
} }
static void static void

View File

@@ -40,6 +40,7 @@
#include "clutter-event-translator.h" #include "clutter-event-translator.h"
#include "clutter-stage-private.h" #include "clutter-stage-private.h"
#include "clutter-private.h" #include "clutter-private.h"
#include "clutter-xkb-a11y-x11.h"
#include <X11/extensions/XInput2.h> #include <X11/extensions/XInput2.h>
@@ -494,13 +495,21 @@ create_device (ClutterDeviceManagerXI2 *manager_xi2,
"device-node", node_path, "device-node", node_path,
"n-rings", num_rings, "n-rings", num_rings,
"n-strips", num_strips, "n-strips", num_strips,
"n-mode-groups", MAX (num_rings, num_strips),
NULL); NULL);
translate_device_classes (backend_x11->xdpy, retval, translate_device_classes (backend_x11->xdpy, retval,
info->classes, info->classes,
info->num_classes); info->num_classes);
#ifdef HAVE_LIBWACOM
if (source == CLUTTER_PAD_DEVICE)
clutter_input_device_xi2_ensure_wacom_info (retval, manager_xi2->wacom_db);
#endif
g_free (vendor_id); g_free (vendor_id);
g_free (product_id); g_free (product_id);
g_free (node_path);
CLUTTER_NOTE (BACKEND, "Created device '%s' (id: %d, has-cursor: %s)", CLUTTER_NOTE (BACKEND, "Created device '%s' (id: %d, has-cursor: %s)",
info->name, info->name,
@@ -1125,7 +1134,7 @@ translate_pad_event (ClutterEvent *event,
ClutterInputDevice *device) ClutterInputDevice *device)
{ {
gdouble value; gdouble value;
guint number; guint number, mode = 0;
if (!translate_pad_axis (device, &xev->valuators, if (!translate_pad_axis (device, &xev->valuators,
&event->any.type, &event->any.type,
@@ -1139,15 +1148,21 @@ translate_pad_event (ClutterEvent *event,
if (xev->evtype == XI_Motion) if (xev->evtype == XI_Motion)
value = -1; value = -1;
#ifdef HAVE_LIBWACOM
mode = clutter_input_device_xi2_get_pad_group_mode (device, number);
#endif
if (event->any.type == CLUTTER_PAD_RING) if (event->any.type == CLUTTER_PAD_RING)
{ {
event->pad_ring.ring_number = number; event->pad_ring.ring_number = number;
event->pad_ring.angle = value; event->pad_ring.angle = value;
event->pad_ring.mode = mode;
} }
else else
{ {
event->pad_strip.strip_number = number; event->pad_strip.strip_number = number;
event->pad_strip.value = value; event->pad_strip.value = value;
event->pad_strip.mode = mode;
} }
event->any.time = xev->time; event->any.time = xev->time;
@@ -1374,6 +1389,13 @@ clutter_device_manager_xi2_translate_event (ClutterEventTranslator *translator,
/* Pad buttons are 0-indexed */ /* Pad buttons are 0-indexed */
event->pad_button.button = xev->detail - 1; event->pad_button.button = xev->detail - 1;
#ifdef HAVE_LIBWACOM
clutter_input_device_xi2_update_pad_state (device,
event->pad_button.button,
(xi_event->evtype == XI_ButtonPress),
&event->pad_button.group,
&event->pad_button.mode);
#endif
clutter_event_set_device (event, device); clutter_event_set_device (event, device);
clutter_event_set_source_device (event, source_device); clutter_event_set_source_device (event, source_device);
@@ -1987,6 +2009,8 @@ clutter_device_manager_xi2_constructed (GObject *gobject)
XSync (backend_x11->xdpy, False); XSync (backend_x11->xdpy, False);
clutter_device_manager_x11_a11y_init (manager);
if (G_OBJECT_CLASS (clutter_device_manager_xi2_parent_class)->constructed) if (G_OBJECT_CLASS (clutter_device_manager_xi2_parent_class)->constructed)
G_OBJECT_CLASS (clutter_device_manager_xi2_parent_class)->constructed (gobject); G_OBJECT_CLASS (clutter_device_manager_xi2_parent_class)->constructed (gobject);
} }
@@ -2021,6 +2045,13 @@ clutter_device_manager_xi2_create_virtual_device (ClutterDeviceManager *manage
NULL); NULL);
} }
static ClutterVirtualDeviceType
clutter_device_manager_xi2_get_supported_virtual_device_types (ClutterDeviceManager *device_manager)
{
return (CLUTTER_VIRTUAL_DEVICE_TYPE_KEYBOARD |
CLUTTER_VIRTUAL_DEVICE_TYPE_POINTER);
}
static void static void
clutter_device_manager_xi2_class_init (ClutterDeviceManagerXI2Class *klass) clutter_device_manager_xi2_class_init (ClutterDeviceManagerXI2Class *klass)
{ {
@@ -2049,6 +2080,8 @@ clutter_device_manager_xi2_class_init (ClutterDeviceManagerXI2Class *klass)
manager_class->get_device = clutter_device_manager_xi2_get_device; manager_class->get_device = clutter_device_manager_xi2_get_device;
manager_class->select_stage_events = clutter_device_manager_xi2_select_stage_events; manager_class->select_stage_events = clutter_device_manager_xi2_select_stage_events;
manager_class->create_virtual_device = clutter_device_manager_xi2_create_virtual_device; manager_class->create_virtual_device = clutter_device_manager_xi2_create_virtual_device;
manager_class->get_supported_virtual_device_types = clutter_device_manager_xi2_get_supported_virtual_device_types;
manager_class->apply_kbd_a11y_settings = clutter_device_manager_x11_apply_kbd_a11y_settings;
} }
static void static void
@@ -2059,4 +2092,8 @@ clutter_device_manager_xi2_init (ClutterDeviceManagerXI2 *self)
(GDestroyNotify) g_object_unref); (GDestroyNotify) g_object_unref);
self->tools_by_serial = g_hash_table_new_full (NULL, NULL, NULL, self->tools_by_serial = g_hash_table_new_full (NULL, NULL, NULL,
(GDestroyNotify) g_object_unref); (GDestroyNotify) g_object_unref);
#ifdef HAVE_LIBWACOM
self->wacom_db = libwacom_database_new ();
#endif
} }

View File

@@ -26,6 +26,10 @@
#include <clutter/clutter-device-manager.h> #include <clutter/clutter-device-manager.h>
#ifdef HAVE_LIBWACOM
#include <libwacom/libwacom.h>
#endif
G_BEGIN_DECLS G_BEGIN_DECLS
#define CLUTTER_TYPE_DEVICE_MANAGER_XI2 (_clutter_device_manager_xi2_get_type ()) #define CLUTTER_TYPE_DEVICE_MANAGER_XI2 (_clutter_device_manager_xi2_get_type ())
@@ -51,6 +55,10 @@ struct _ClutterDeviceManagerXI2
GList *slave_devices; GList *slave_devices;
int opcode; int opcode;
#ifdef HAVE_LIBWACOM
WacomDeviceDatabase *wacom_db;
#endif
}; };
struct _ClutterDeviceManagerXI2Class struct _ClutterDeviceManagerXI2Class

View File

@@ -45,6 +45,11 @@ struct _ClutterInputDeviceXI2
gint device_id; gint device_id;
ClutterInputDeviceTool *current_tool; ClutterInputDeviceTool *current_tool;
#ifdef HAVE_LIBWACOM
WacomDevice *wacom_device;
GArray *group_modes;
#endif
}; };
#define N_BUTTONS 5 #define N_BUTTONS 5
@@ -64,6 +69,15 @@ clutter_input_device_xi2_constructed (GObject *gobject)
if (G_OBJECT_CLASS (clutter_input_device_xi2_parent_class)->constructed) if (G_OBJECT_CLASS (clutter_input_device_xi2_parent_class)->constructed)
G_OBJECT_CLASS (clutter_input_device_xi2_parent_class)->constructed (gobject); G_OBJECT_CLASS (clutter_input_device_xi2_parent_class)->constructed (gobject);
#ifdef HAVE_LIBWACOM
if (clutter_input_device_get_device_type (CLUTTER_INPUT_DEVICE (gobject)) == CLUTTER_PAD_DEVICE)
{
device_xi2->group_modes = g_array_new (FALSE, TRUE, sizeof (guint));
g_array_set_size (device_xi2->group_modes,
clutter_input_device_get_n_mode_groups (CLUTTER_INPUT_DEVICE (gobject)));
}
#endif
} }
static gboolean static gboolean
@@ -87,6 +101,85 @@ clutter_input_device_xi2_is_grouped (ClutterInputDevice *device,
return FALSE; return FALSE;
} }
static void
clutter_input_device_xi2_finalize (GObject *object)
{
#ifdef HAVE_LIBWACOM
ClutterInputDeviceXI2 *device_xi2 = CLUTTER_INPUT_DEVICE_XI2 (object);
if (device_xi2->wacom_device)
libwacom_destroy (device_xi2->wacom_device);
if (device_xi2->group_modes)
g_array_unref (device_xi2->group_modes);
#endif
G_OBJECT_CLASS (clutter_input_device_xi2_parent_class)->finalize (object);
}
static gint
clutter_input_device_xi2_get_group_n_modes (ClutterInputDevice *device,
gint group)
{
#ifdef HAVE_LIBWACOM
ClutterInputDeviceXI2 *device_xi2 = CLUTTER_INPUT_DEVICE_XI2 (device);
if (device_xi2->wacom_device)
{
if (group == 0)
{
if (libwacom_has_ring (device_xi2->wacom_device))
return libwacom_get_ring_num_modes (device_xi2->wacom_device);
else if (libwacom_get_num_strips (device_xi2->wacom_device) >= 1)
return libwacom_get_strips_num_modes (device_xi2->wacom_device);
}
else if (group == 1)
{
if (libwacom_has_ring2 (device_xi2->wacom_device))
return libwacom_get_ring2_num_modes (device_xi2->wacom_device);
else if (libwacom_get_num_strips (device_xi2->wacom_device) >= 2)
return libwacom_get_strips_num_modes (device_xi2->wacom_device);
}
}
#endif
return -1;
}
#ifdef HAVE_LIBWACOM
static int
clutter_input_device_xi2_get_button_group (ClutterInputDevice *device,
guint button)
{
ClutterInputDeviceXI2 *device_xi2 = CLUTTER_INPUT_DEVICE_XI2 (device);
if (device_xi2->wacom_device)
{
if (button >= libwacom_get_num_buttons (device_xi2->wacom_device))
return -1;
return libwacom_get_button_led_group (device_xi2->wacom_device,
'A' + button);
}
else
return -1;
}
#endif
static gboolean
clutter_input_device_xi2_is_mode_switch_button (ClutterInputDevice *device,
guint group,
guint button)
{
int button_group = -1;
#ifdef HAVE_LIBWACOM
button_group = clutter_input_device_xi2_get_button_group (device, button);
#endif
return button_group == (int) group;
}
static void static void
clutter_input_device_xi2_class_init (ClutterInputDeviceXI2Class *klass) clutter_input_device_xi2_class_init (ClutterInputDeviceXI2Class *klass)
{ {
@@ -94,9 +187,12 @@ clutter_input_device_xi2_class_init (ClutterInputDeviceXI2Class *klass)
ClutterInputDeviceClass *device_class = CLUTTER_INPUT_DEVICE_CLASS (klass); ClutterInputDeviceClass *device_class = CLUTTER_INPUT_DEVICE_CLASS (klass);
gobject_class->constructed = clutter_input_device_xi2_constructed; gobject_class->constructed = clutter_input_device_xi2_constructed;
gobject_class->finalize = clutter_input_device_xi2_finalize;
device_class->keycode_to_evdev = clutter_input_device_xi2_keycode_to_evdev; device_class->keycode_to_evdev = clutter_input_device_xi2_keycode_to_evdev;
device_class->is_grouped = clutter_input_device_xi2_is_grouped; device_class->is_grouped = clutter_input_device_xi2_is_grouped;
device_class->get_group_n_modes = clutter_input_device_xi2_get_group_n_modes;
device_class->is_mode_switch_button = clutter_input_device_xi2_is_mode_switch_button;
} }
static void static void
@@ -196,3 +292,66 @@ clutter_input_device_xi2_get_current_tool (ClutterInputDevice *device)
ClutterInputDeviceXI2 *device_xi2 = CLUTTER_INPUT_DEVICE_XI2 (device); ClutterInputDeviceXI2 *device_xi2 = CLUTTER_INPUT_DEVICE_XI2 (device);
return device_xi2->current_tool; return device_xi2->current_tool;
} }
#ifdef HAVE_LIBWACOM
void
clutter_input_device_xi2_ensure_wacom_info (ClutterInputDevice *device,
WacomDeviceDatabase *wacom_db)
{
ClutterInputDeviceXI2 *device_xi2 = CLUTTER_INPUT_DEVICE_XI2 (device);
const gchar *node_path;
node_path = clutter_input_device_get_device_node (device);
device_xi2->wacom_device = libwacom_new_from_path (wacom_db, node_path,
WFALLBACK_NONE, NULL);
}
guint
clutter_input_device_xi2_get_pad_group_mode (ClutterInputDevice *device,
guint group)
{
ClutterInputDeviceXI2 *device_xi2 = CLUTTER_INPUT_DEVICE_XI2 (device);
if (group >= device_xi2->group_modes->len)
return 0;
return g_array_index (device_xi2->group_modes, guint, group);
}
void
clutter_input_device_xi2_update_pad_state (ClutterInputDevice *device,
guint button,
guint state,
guint *group,
guint *mode)
{
ClutterInputDeviceXI2 *device_xi2 = CLUTTER_INPUT_DEVICE_XI2 (device);
guint button_group, *group_mode;
gboolean is_mode_switch = FALSE;
button_group = clutter_input_device_xi2_get_button_group (device, button);
is_mode_switch = button_group >= 0;
/* Assign all non-mode-switch buttons to group 0 so far */
button_group = MAX (0, button_group);
if (button_group >= device_xi2->group_modes->len)
return;
group_mode = &g_array_index (device_xi2->group_modes, guint, button_group);
if (is_mode_switch && state)
{
guint next, n_modes;
n_modes = clutter_input_device_get_group_n_modes (device, button_group);
next = (*group_mode + 1) % n_modes;
*group_mode = next;
}
if (group)
*group = button_group;
if (mode)
*mode = *group_mode;
}
#endif

View File

@@ -27,6 +27,10 @@
#include <clutter/clutter-input-device.h> #include <clutter/clutter-input-device.h>
#include <X11/extensions/XInput2.h> #include <X11/extensions/XInput2.h>
#ifdef HAVE_LIBWACOM
#include <libwacom/libwacom.h>
#endif
G_BEGIN_DECLS G_BEGIN_DECLS
#define CLUTTER_TYPE_INPUT_DEVICE_XI2 (_clutter_input_device_xi2_get_type ()) #define CLUTTER_TYPE_INPUT_DEVICE_XI2 (_clutter_input_device_xi2_get_type ())
@@ -45,6 +49,21 @@ void clutter_input_device_xi2_update_tool (ClutterInputDevice *device,
ClutterInputDeviceTool *tool); ClutterInputDeviceTool *tool);
ClutterInputDeviceTool * clutter_input_device_xi2_get_current_tool (ClutterInputDevice *device); ClutterInputDeviceTool * clutter_input_device_xi2_get_current_tool (ClutterInputDevice *device);
#ifdef HAVE_LIBWACOM
void clutter_input_device_xi2_ensure_wacom_info (ClutterInputDevice *device,
WacomDeviceDatabase *wacom_db);
guint clutter_input_device_xi2_get_pad_group_mode (ClutterInputDevice *device,
guint group);
void clutter_input_device_xi2_update_pad_state (ClutterInputDevice *device,
guint button,
guint state,
guint *group,
guint *mode);
#endif
G_END_DECLS G_END_DECLS
#endif /* __CLUTTER_INPUT_DEVICE_XI2_H__ */ #endif /* __CLUTTER_INPUT_DEVICE_XI2_H__ */

View File

@@ -48,6 +48,10 @@ clutter_virtual_input_device_x11_notify_relative_motion (ClutterVirtualInputDevi
double dx, double dx,
double dy) double dy)
{ {
XTestFakeRelativeMotionEvent (clutter_x11_get_default_display (),
(int) dx,
(int) dy,
0);
} }
static void static void
@@ -56,6 +60,11 @@ clutter_virtual_input_device_x11_notify_absolute_motion (ClutterVirtualInputDevi
double x, double x,
double y) double y)
{ {
XTestFakeMotionEvent (clutter_x11_get_default_display (),
clutter_x11_get_default_screen (),
(int) x,
(int) y,
0);
} }
static void static void
@@ -68,6 +77,48 @@ clutter_virtual_input_device_x11_notify_button (ClutterVirtualInputDevice *virtu
button, button_state == CLUTTER_BUTTON_STATE_PRESSED, 0); button, button_state == CLUTTER_BUTTON_STATE_PRESSED, 0);
} }
static void
clutter_virtual_input_device_x11_notify_discrete_scroll (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
ClutterScrollDirection direction,
ClutterScrollSource scroll_source)
{
Display *xdisplay = clutter_x11_get_default_display ();
int button;
switch (direction)
{
case CLUTTER_SCROLL_UP:
button = 4;
break;
case CLUTTER_SCROLL_DOWN:
button = 5;
break;
case CLUTTER_SCROLL_LEFT:
button = 6;
break;
case CLUTTER_SCROLL_RIGHT:
button = 7;
break;
default:
g_warn_if_reached ();
return;
}
XTestFakeButtonEvent (xdisplay, button, True, 0);
XTestFakeButtonEvent (xdisplay, button, False, 0);
}
static void
clutter_virtual_input_device_x11_notify_scroll_continuous (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
double dx,
double dy,
ClutterScrollSource scroll_source,
ClutterScrollFinishFlags finish_flags)
{
}
static void static void
clutter_virtual_input_device_x11_notify_key (ClutterVirtualInputDevice *virtual_device, clutter_virtual_input_device_x11_notify_key (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us, uint64_t time_us,
@@ -91,6 +142,34 @@ clutter_virtual_input_device_x11_notify_keyval (ClutterVirtualInputDevice *virtu
keycode, key_state == CLUTTER_KEY_STATE_PRESSED, 0); keycode, key_state == CLUTTER_KEY_STATE_PRESSED, 0);
} }
static void
clutter_virtual_input_device_x11_notify_touch_down (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int device_slot,
double x,
double y)
{
g_warning ("Virtual touch motion not implemented under X11");
}
static void
clutter_virtual_input_device_x11_notify_touch_motion (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int device_slot,
double x,
double y)
{
g_warning ("Virtual touch motion not implemented under X11");
}
static void
clutter_virtual_input_device_x11_notify_touch_up (ClutterVirtualInputDevice *virtual_device,
uint64_t time_us,
int device_slot)
{
g_warning ("Virtual touch motion not implemented under X11");
}
static void static void
clutter_virtual_input_device_x11_init (ClutterVirtualInputDeviceX11 *virtual_device_x11) clutter_virtual_input_device_x11_init (ClutterVirtualInputDeviceX11 *virtual_device_x11)
{ {
@@ -105,6 +184,11 @@ clutter_virtual_input_device_x11_class_init (ClutterVirtualInputDeviceX11Class *
virtual_input_device_class->notify_relative_motion = clutter_virtual_input_device_x11_notify_relative_motion; virtual_input_device_class->notify_relative_motion = clutter_virtual_input_device_x11_notify_relative_motion;
virtual_input_device_class->notify_absolute_motion = clutter_virtual_input_device_x11_notify_absolute_motion; virtual_input_device_class->notify_absolute_motion = clutter_virtual_input_device_x11_notify_absolute_motion;
virtual_input_device_class->notify_button = clutter_virtual_input_device_x11_notify_button; virtual_input_device_class->notify_button = clutter_virtual_input_device_x11_notify_button;
virtual_input_device_class->notify_discrete_scroll = clutter_virtual_input_device_x11_notify_discrete_scroll;
virtual_input_device_class->notify_scroll_continuous = clutter_virtual_input_device_x11_notify_scroll_continuous;
virtual_input_device_class->notify_key = clutter_virtual_input_device_x11_notify_key; virtual_input_device_class->notify_key = clutter_virtual_input_device_x11_notify_key;
virtual_input_device_class->notify_keyval = clutter_virtual_input_device_x11_notify_keyval; virtual_input_device_class->notify_keyval = clutter_virtual_input_device_x11_notify_keyval;
virtual_input_device_class->notify_touch_down = clutter_virtual_input_device_x11_notify_touch_down;
virtual_input_device_class->notify_touch_motion = clutter_virtual_input_device_x11_notify_touch_motion;
virtual_input_device_class->notify_touch_up = clutter_virtual_input_device_x11_notify_touch_up;
} }

View File

@@ -161,9 +161,6 @@ gint clutter_x11_event_get_key_group (const ClutterEvent *event);
CLUTTER_AVAILABLE_IN_ALL CLUTTER_AVAILABLE_IN_ALL
guint clutter_x11_event_sequence_get_touch_detail (const ClutterEventSequence *sequence); guint clutter_x11_event_sequence_get_touch_detail (const ClutterEventSequence *sequence);
CLUTTER_AVAILABLE_IN_ALL
void clutter_x11_request_reset_on_video_memory_purge (void);
G_END_DECLS G_END_DECLS
#endif /* __CLUTTER_X11_H__ */ #endif /* __CLUTTER_X11_H__ */

View File

@@ -0,0 +1,328 @@
/*
*
* Copyright © 2001 Ximian, Inc.
* Copyright (C) 2007 William Jon McCann <mccann@jhu.edu>
* Copyright (C) 2017 Red Hat
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*
*/
#include "clutter-device-manager-private.h"
#include "clutter-xkb-a11y-x11.h"
#include <X11/XKBlib.h>
#include <X11/extensions/XKBstr.h>
#define DEFAULT_XKB_SET_CONTROLS_MASK XkbSlowKeysMask | \
XkbBounceKeysMask | \
XkbStickyKeysMask | \
XkbMouseKeysMask | \
XkbMouseKeysAccelMask | \
XkbAccessXKeysMask | \
XkbAccessXTimeoutMask | \
XkbAccessXFeedbackMask | \
XkbControlsEnabledMask
static int _xkb_event_base;
static XkbDescRec *
get_xkb_desc_rec (ClutterBackendX11 *backend_x11)
{
XkbDescRec *desc;
Status status = Success;
clutter_x11_trap_x_errors ();
desc = XkbGetMap (backend_x11->xdpy, XkbAllMapComponentsMask, XkbUseCoreKbd);
if (desc != NULL)
{
desc->ctrls = NULL;
status = XkbGetControls (backend_x11->xdpy, XkbAllControlsMask, desc);
}
clutter_x11_untrap_x_errors ();
g_return_val_if_fail (desc != NULL, NULL);
g_return_val_if_fail (desc->ctrls != NULL, NULL);
g_return_val_if_fail (status == Success, NULL);
return desc;
}
static void
set_xkb_desc_rec (ClutterBackendX11 *backend_x11,
XkbDescRec *desc)
{
clutter_x11_trap_x_errors ();
XkbSetControls (backend_x11->xdpy, DEFAULT_XKB_SET_CONTROLS_MASK, desc);
XSync (backend_x11->xdpy, FALSE);
clutter_x11_untrap_x_errors ();
}
static void
check_settings_changed (ClutterDeviceManager *device_manager)
{
ClutterBackendX11 *backend_x11;
ClutterKbdA11ySettings kbd_a11y_settings;
ClutterKeyboardA11yFlags what_changed = 0;
XkbDescRec *desc;
backend_x11 = CLUTTER_BACKEND_X11 (clutter_get_default_backend ());
desc = get_xkb_desc_rec (backend_x11);
if (!desc)
return;
clutter_device_manager_get_kbd_a11y_settings (device_manager, &kbd_a11y_settings);
if (desc->ctrls->enabled_ctrls & XkbSlowKeysMask &&
!(kbd_a11y_settings.controls & CLUTTER_A11Y_SLOW_KEYS_ENABLED))
{
what_changed |= CLUTTER_A11Y_SLOW_KEYS_ENABLED;
kbd_a11y_settings.controls |= CLUTTER_A11Y_SLOW_KEYS_ENABLED;
}
else if (!(desc->ctrls->enabled_ctrls & XkbSlowKeysMask) &&
kbd_a11y_settings.controls & CLUTTER_A11Y_SLOW_KEYS_ENABLED)
{
what_changed |= CLUTTER_A11Y_SLOW_KEYS_ENABLED;
kbd_a11y_settings.controls &= ~CLUTTER_A11Y_SLOW_KEYS_ENABLED;
}
if (desc->ctrls->enabled_ctrls & XkbStickyKeysMask &&
!(kbd_a11y_settings.controls & CLUTTER_A11Y_STICKY_KEYS_ENABLED))
{
what_changed |= CLUTTER_A11Y_STICKY_KEYS_ENABLED;
kbd_a11y_settings.controls |= CLUTTER_A11Y_STICKY_KEYS_ENABLED;
}
else if (!(desc->ctrls->enabled_ctrls & XkbStickyKeysMask) &&
kbd_a11y_settings.controls & CLUTTER_A11Y_STICKY_KEYS_ENABLED)
{
what_changed |= CLUTTER_A11Y_STICKY_KEYS_ENABLED;
kbd_a11y_settings.controls &= ~CLUTTER_A11Y_STICKY_KEYS_ENABLED;
}
if (what_changed)
g_signal_emit_by_name (device_manager,
"kbd-a11y-flags-changed",
kbd_a11y_settings.controls,
what_changed);
XkbFreeKeyboard (desc, XkbAllComponentsMask, TRUE);
}
static ClutterX11FilterReturn
xkb_a11y_event_filter (XEvent *xevent,
ClutterEvent *clutter_event,
gpointer data)
{
ClutterDeviceManager *device_manager = CLUTTER_DEVICE_MANAGER (data);
XkbEvent *xkbev = (XkbEvent *) xevent;
/* 'event_type' is set to zero on notifying us of updates in
* response to client requests (including our own) and non-zero
* to notify us of key/mouse events causing changes (like
* pressing shift 5 times to enable sticky keys).
*
* We only want to update out settings when it's in response to an
* explicit user input event, so require a non-zero event_type.
*/
if (xevent->xany.type == (_xkb_event_base + XkbEventCode) &&
xkbev->any.xkb_type == XkbControlsNotify && xkbev->ctrls.event_type != 0)
check_settings_changed (device_manager);
return CLUTTER_X11_FILTER_CONTINUE;
}
static gboolean
is_xkb_available (ClutterBackendX11 *backend_x11)
{
gint opcode, error_base, event_base, major, minor;
if (_xkb_event_base)
return TRUE;
if (!XkbQueryExtension (backend_x11->xdpy,
&opcode,
&event_base,
&error_base,
&major,
&minor))
return FALSE;
if (!XkbUseExtension (backend_x11->xdpy, &major, &minor))
return FALSE;
_xkb_event_base = event_base;
return TRUE;
}
static unsigned long
set_value_mask (gboolean flag,
unsigned long value,
unsigned long mask)
{
if (flag)
return value | mask;
return value & ~mask;
}
static gboolean
set_xkb_ctrl (XkbDescRec *desc,
ClutterKeyboardA11yFlags settings,
ClutterKeyboardA11yFlags flag,
unsigned long mask)
{
gboolean result = (settings & flag) == flag;
desc->ctrls->enabled_ctrls = set_value_mask (result, desc->ctrls->enabled_ctrls, mask);
return result;
}
void
clutter_device_manager_x11_apply_kbd_a11y_settings (ClutterDeviceManager *device_manager,
ClutterKbdA11ySettings *kbd_a11y_settings)
{
ClutterBackendX11 *backend_x11;
XkbDescRec *desc;
gboolean enable_accessX;
backend_x11 = CLUTTER_BACKEND_X11 (clutter_get_default_backend ());
desc = get_xkb_desc_rec (backend_x11);
if (!desc)
return;
/* general */
enable_accessX = kbd_a11y_settings->controls & CLUTTER_A11Y_KEYBOARD_ENABLED;
desc->ctrls->enabled_ctrls = set_value_mask (enable_accessX,
desc->ctrls->enabled_ctrls,
XkbAccessXKeysMask);
if (set_xkb_ctrl (desc, kbd_a11y_settings->controls, CLUTTER_A11Y_TIMEOUT_ENABLED,
XkbAccessXTimeoutMask))
{
desc->ctrls->ax_timeout = kbd_a11y_settings->timeout_delay;
/* disable only the master flag via the server we will disable
* the rest on the rebound without affecting settings state
* don't change the option flags at all.
*/
desc->ctrls->axt_ctrls_mask = XkbAccessXKeysMask | XkbAccessXFeedbackMask;
desc->ctrls->axt_ctrls_values = 0;
desc->ctrls->axt_opts_mask = 0;
}
desc->ctrls->ax_options =
set_value_mask (kbd_a11y_settings->controls & CLUTTER_A11Y_FEATURE_STATE_CHANGE_BEEP,
desc->ctrls->ax_options,
XkbAccessXFeedbackMask | XkbAX_FeatureFBMask | XkbAX_SlowWarnFBMask);
/* bounce keys */
if (set_xkb_ctrl (desc, kbd_a11y_settings->controls,
CLUTTER_A11Y_BOUNCE_KEYS_ENABLED, XkbBounceKeysMask))
{
desc->ctrls->debounce_delay = kbd_a11y_settings->debounce_delay;
desc->ctrls->ax_options =
set_value_mask (kbd_a11y_settings->controls & CLUTTER_A11Y_BOUNCE_KEYS_BEEP_REJECT,
desc->ctrls->ax_options,
XkbAccessXFeedbackMask | XkbAX_BKRejectFBMask);
}
/* mouse keys */
if (set_xkb_ctrl (desc, kbd_a11y_settings->controls,
CLUTTER_A11Y_MOUSE_KEYS_ENABLED, XkbMouseKeysMask | XkbMouseKeysAccelMask))
{
gint mk_max_speed;
gint mk_accel_time;
desc->ctrls->mk_interval = 100; /* msec between mousekey events */
desc->ctrls->mk_curve = 50;
/* We store pixels / sec, XKB wants pixels / event */
mk_max_speed = kbd_a11y_settings->mousekeys_max_speed;
desc->ctrls->mk_max_speed = mk_max_speed / (1000 / desc->ctrls->mk_interval);
if (desc->ctrls->mk_max_speed <= 0)
desc->ctrls->mk_max_speed = 1;
mk_accel_time = kbd_a11y_settings->mousekeys_accel_time;
desc->ctrls->mk_time_to_max = mk_accel_time / desc->ctrls->mk_interval;
if (desc->ctrls->mk_time_to_max <= 0)
desc->ctrls->mk_time_to_max = 1;
desc->ctrls->mk_delay = kbd_a11y_settings->mousekeys_init_delay;
}
/* slow keys */
if (set_xkb_ctrl (desc, kbd_a11y_settings->controls,
CLUTTER_A11Y_SLOW_KEYS_ENABLED, XkbSlowKeysMask))
{
desc->ctrls->ax_options =
set_value_mask (kbd_a11y_settings->controls & CLUTTER_A11Y_SLOW_KEYS_BEEP_PRESS,
desc->ctrls->ax_options, XkbAccessXFeedbackMask | XkbAX_SKPressFBMask);
desc->ctrls->ax_options =
set_value_mask (kbd_a11y_settings->controls & CLUTTER_A11Y_SLOW_KEYS_BEEP_ACCEPT,
desc->ctrls->ax_options, XkbAccessXFeedbackMask | XkbAX_SKAcceptFBMask);
desc->ctrls->ax_options =
set_value_mask (kbd_a11y_settings->controls & CLUTTER_A11Y_SLOW_KEYS_BEEP_REJECT,
desc->ctrls->ax_options, XkbAccessXFeedbackMask | XkbAX_SKRejectFBMask);
desc->ctrls->slow_keys_delay = kbd_a11y_settings->slowkeys_delay;
/* anything larger than 500 seems to loose all keyboard input */
if (desc->ctrls->slow_keys_delay > 500)
desc->ctrls->slow_keys_delay = 500;
}
/* sticky keys */
if (set_xkb_ctrl (desc, kbd_a11y_settings->controls,
CLUTTER_A11Y_STICKY_KEYS_ENABLED, XkbStickyKeysMask))
{
desc->ctrls->ax_options |= XkbAX_LatchToLockMask;
desc->ctrls->ax_options =
set_value_mask (kbd_a11y_settings->controls & CLUTTER_A11Y_STICKY_KEYS_TWO_KEY_OFF,
desc->ctrls->ax_options, XkbAccessXFeedbackMask | XkbAX_TwoKeysMask);
desc->ctrls->ax_options =
set_value_mask (kbd_a11y_settings->controls & CLUTTER_A11Y_STICKY_KEYS_BEEP,
desc->ctrls->ax_options, XkbAccessXFeedbackMask | XkbAX_StickyKeysFBMask);
}
/* toggle keys */
desc->ctrls->ax_options =
set_value_mask (kbd_a11y_settings->controls & CLUTTER_A11Y_TOGGLE_KEYS_ENABLED,
desc->ctrls->ax_options, XkbAccessXFeedbackMask | XkbAX_IndicatorFBMask);
set_xkb_desc_rec (backend_x11, desc);
XkbFreeKeyboard (desc, XkbAllComponentsMask, TRUE);
}
gboolean
clutter_device_manager_x11_a11y_init (ClutterDeviceManager *device_manager)
{
ClutterBackendX11 *backend_x11;
guint event_mask;
backend_x11 =
CLUTTER_BACKEND_X11 (_clutter_device_manager_get_backend (device_manager));
if (!is_xkb_available (backend_x11))
return FALSE;
event_mask = XkbControlsNotifyMask | XkbAccessXNotifyMask;
XkbSelectEvents (backend_x11->xdpy, XkbUseCoreKbd, event_mask, event_mask);
clutter_x11_add_filter (xkb_a11y_event_filter, device_manager);
return TRUE;
}

View File

@@ -0,0 +1,39 @@
/*
*
* Copyright © 2001 Ximian, Inc.
* Copyright (C) 2007 William Jon McCann <mccann@jhu.edu>
* Copyright (C) 2017 Red Hat
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*
*/
#ifndef CLUTTER_XKB_A11Y_X11_H
#define CLUTTER_XKB_A11Y_X11_H
#include "clutter-device-manager-private.h"
#include "clutter-backend-x11.h"
#include <X11/Xlib.h>
void
clutter_device_manager_x11_apply_kbd_a11y_settings (ClutterDeviceManager *device_manager,
ClutterKbdA11ySettings *kbd_a11y_settings);
gboolean
clutter_device_manager_x11_a11y_init (ClutterDeviceManager *device_manager);
#endif /* CLUTTER_XKB_A11Y_X11_H */

View File

@@ -121,6 +121,7 @@ m4_define([xcomposite_req_version], [0.4])
m4_define([gdk_req_version], [3.3.18]) m4_define([gdk_req_version], [3.3.18])
m4_define([libinput_req_version], [1.4.0]) m4_define([libinput_req_version], [1.4.0])
m4_define([libudev_req_version], [136]) m4_define([libudev_req_version], [136])
m4_define([libwacom_req_version], [0.13])
AC_SUBST([GLIB_REQ_VERSION], [glib_req_version]) AC_SUBST([GLIB_REQ_VERSION], [glib_req_version])
AC_SUBST([COGL_REQ_VERSION], [cogl_req_version]) AC_SUBST([COGL_REQ_VERSION], [cogl_req_version])
@@ -133,6 +134,7 @@ AC_SUBST([XCOMPOSITE_REQ_VERSION], [xcomposite_req_version])
AC_SUBST([GDK_REQ_VERSION], [gdk_req_version]) AC_SUBST([GDK_REQ_VERSION], [gdk_req_version])
AC_SUBST([LIBINPUT_REQ_VERSION], [libinput_req_version]) AC_SUBST([LIBINPUT_REQ_VERSION], [libinput_req_version])
AC_SUBST([LIBUDEV_REQ_VERSION], [libudev_req_version]) AC_SUBST([LIBUDEV_REQ_VERSION], [libudev_req_version])
AC_SUBST([LIBWACOM_REQ_VERSION], [libwacom_req_version])
# Checks for typedefs, structures, and compiler characteristics. # Checks for typedefs, structures, and compiler characteristics.
AM_PATH_GLIB_2_0([glib_req_version], AM_PATH_GLIB_2_0([glib_req_version],
@@ -149,7 +151,7 @@ AC_ARG_ENABLE([Bsymbolic],
saved_LDFLAGS="${LDFLAGS}" saved_LDFLAGS="${LDFLAGS}"
AC_MSG_CHECKING([for -Bsymbolic-functions linker flag]) AC_MSG_CHECKING([for -Bsymbolic-functions linker flag])
LDFLAGS=-Wl,-Bsymbolic-functions LDFLAGS=-Wl,-Bsymbolic-functions
AC_TRY_LINK([], [int main (void) { return 0; }], AC_TRY_LINK([], [return 0],
[ [
AC_MSG_RESULT([yes]) AC_MSG_RESULT([yes])
enable_Bsymbolic=yes enable_Bsymbolic=yes
@@ -170,7 +172,7 @@ dnl on other compilers, check if we can do -fvisibility=hidden
SAVED_CFLAGS="${CFLAGS}" SAVED_CFLAGS="${CFLAGS}"
CFLAGS="-fvisibility=hidden" CFLAGS="-fvisibility=hidden"
AC_MSG_CHECKING([for -fvisibility=hidden compiler flag]) AC_MSG_CHECKING([for -fvisibility=hidden compiler flag])
AC_TRY_COMPILE([], [int main (void) { return 0; }], AC_TRY_COMPILE([], [return 0],
AC_MSG_RESULT(yes) AC_MSG_RESULT(yes)
enable_fvisibility_hidden=yes, enable_fvisibility_hidden=yes,
AC_MSG_RESULT(no) AC_MSG_RESULT(no)
@@ -508,6 +510,32 @@ X11_EXTS=${X11_EXTS#* }
AC_CACHE_SAVE AC_CACHE_SAVE
dnl === Libwacom support for X11 ===============================================
AC_ARG_WITH(libwacom,
AC_HELP_STRING([--without-libwacom],
[disable the use of libwacom for advanced tablet management]),,
with_libwacom=auto)
have_libwacom=no
AC_MSG_CHECKING([libwacom])
if test x$with_libwacom = xno ; then
AC_MSG_RESULT([disabled])
else
if $PKG_CONFIG --exists libwacom '>=' $LIBWACOM_REQ_VERSION; then
have_libwacom=yes
AC_MSG_RESULT(yes)
PKG_CHECK_MODULES([LIBWACOM], [libwacom])
AC_SUBST(LIBWACOM_CFLAGS)
AC_SUBST(LIBWACOM_LIBS)
AC_DEFINE([HAVE_LIBWACOM], 1, [Building with libwacom for advanced tablet management])
else
AC_MSG_RESULT(no)
if test x$with_libwacom = xyes ; then
AC_MSG_ERROR([libwacom forced but not found])
fi
fi
fi
dnl === Enable GDK-Pixbuf in tests ============================================ dnl === Enable GDK-Pixbuf in tests ============================================
m4_define([pixbuf_default], [yes]) m4_define([pixbuf_default], [yes])
@@ -679,8 +707,8 @@ AS_IF([test "x$CLUTTER_BASE_PC_FILES_PRIVATE" = "x" && test "x$BACKEND_PC_FILES_
AC_SUBST(CLUTTER_REQUIRES) AC_SUBST(CLUTTER_REQUIRES)
AC_SUBST(CLUTTER_REQUIRES_PRIVATE) AC_SUBST(CLUTTER_REQUIRES_PRIVATE)
CLUTTER_CFLAGS="$FLAVOUR_CFLAGS $CLUTTER_DEPS_CFLAGS $CLUTTER_DEPS_PRIVATE_CFLAGS $GLIB_CFLAGS" CLUTTER_CFLAGS="$FLAVOUR_CFLAGS $CLUTTER_DEPS_CFLAGS $CLUTTER_DEPS_PRIVATE_CFLAGS $GLIB_CFLAGS $LIBWACOM_CFLAGS"
CLUTTER_LIBS="$FLAVOUR_LIBS $CLUTTER_DEPS_LIBS $CLUTTER_DEPS_PRIVATE_LIBS $GLIB_LIBS" CLUTTER_LIBS="$FLAVOUR_LIBS $CLUTTER_DEPS_LIBS $CLUTTER_DEPS_PRIVATE_LIBS $GLIB_LIBS $LIBWACOM_LIBS"
AC_SUBST(CLUTTER_CFLAGS) AC_SUBST(CLUTTER_CFLAGS)
AC_SUBST(CLUTTER_LIBS) AC_SUBST(CLUTTER_LIBS)

View File

@@ -407,7 +407,8 @@ test_scale_center (TestState *state)
g_assert (scale_x == 4.0); g_assert (scale_x == 4.0);
g_assert (scale_y == 2.0); g_assert (scale_y == 2.0);
g_assert (gravity == CLUTTER_GRAVITY_NONE); g_assert (gravity == CLUTTER_GRAVITY_NONE);
assert_notifications (NOTIFY_SCALE_CENTER_X | NOTIFY_SCALE_CENTER_Y assert_notifications (NOTIFY_SCALE_X | NOTIFY_SCALE_Y
| NOTIFY_SCALE_CENTER_X | NOTIFY_SCALE_CENTER_Y
| NOTIFY_SCALE_GRAVITY); | NOTIFY_SCALE_GRAVITY);
assert_coords (state, 100 + 10 - 10 * 4, 200 + 20 - 20 * 2, assert_coords (state, 100 + 10 - 10 * 4, 200 + 20 - 20 * 2,
100 + 10 + (RECT_WIDTH - 10) * 4, 100 + 10 + (RECT_WIDTH - 10) * 4,

View File

@@ -452,7 +452,7 @@ libmutter_cogl_@LIBMUTTER_API_VERSION@_la_LDFLAGS = \
-avoid-version \ -avoid-version \
-export-dynamic \ -export-dynamic \
-rpath $(mutterlibdir) \ -rpath $(mutterlibdir) \
-export-symbols-regex "^(cogl|_cogl_debug_flags|_cogl_atlas_new|_cogl_atlas_add_reorganize_callback|_cogl_atlas_reserve_space|_cogl_callback|_cogl_util_get_eye_planes_for_screen_poly|_cogl_atlas_texture_remove_reorganize_callback|_cogl_atlas_texture_add_reorganize_callback|_cogl_texture_get_format|_cogl_texture_foreach_sub_texture_in_region|_cogl_texture_set_region|_cogl_profile_trace_message|_cogl_context_get_default|_cogl_framebuffer_get_stencil_bits|_cogl_clip_stack_push_rectangle|_cogl_framebuffer_get_modelview_stack|_cogl_object_default_unref|_cogl_pipeline_foreach_layer_internal|_cogl_clip_stack_push_primitive|_cogl_buffer_unmap_for_fill_or_fallback|_cogl_framebuffer_draw_primitive|_cogl_debug_instances|_cogl_framebuffer_get_projection_stack|_cogl_pipeline_layer_get_texture|_cogl_buffer_map_for_fill_or_fallback|_cogl_texture_can_hardware_repeat|_cogl_pipeline_prune_to_n_layers|_cogl_primitive_draw|test_|unit_test_|_cogl_winsys_glx_get_vtable|_cogl_winsys_egl_xlib_get_vtable|_cogl_winsys_egl_get_vtable|_cogl_closure_disconnect|_cogl_onscreen_notify_complete|_cogl_onscreen_notify_frame_sync|_cogl_winsys_egl_renderer_connect_common|_cogl_winsys_error_quark|_cogl_set_error|_cogl_poll_renderer_add_fd|_cogl_poll_renderer_add_idle|_cogl_framebuffer_winsys_update_size|_cogl_winsys_egl_make_current|_cogl_pixel_format_get_bytes_per_pixel).*" -export-symbols-regex "^(cogl|_cogl_debug_flags|_cogl_atlas_new|_cogl_atlas_add_reorganize_callback|_cogl_atlas_reserve_space|_cogl_callback|_cogl_util_get_eye_planes_for_screen_poly|_cogl_atlas_texture_remove_reorganize_callback|_cogl_atlas_texture_add_reorganize_callback|_cogl_texture_get_format|_cogl_texture_foreach_sub_texture_in_region|_cogl_texture_set_region|_cogl_profile_trace_message|_cogl_context_get_default|_cogl_framebuffer_get_stencil_bits|_cogl_clip_stack_push_rectangle|_cogl_framebuffer_get_modelview_stack|_cogl_object_default_unref|_cogl_pipeline_foreach_layer_internal|_cogl_clip_stack_push_primitive|_cogl_buffer_unmap_for_fill_or_fallback|_cogl_framebuffer_draw_primitive|_cogl_debug_instances|_cogl_framebuffer_get_projection_stack|_cogl_pipeline_layer_get_texture|_cogl_buffer_map_for_fill_or_fallback|_cogl_texture_can_hardware_repeat|_cogl_pipeline_prune_to_n_layers|_cogl_primitive_draw|test_|unit_test_|_cogl_winsys_glx_get_vtable|_cogl_winsys_egl_xlib_get_vtable|_cogl_winsys_egl_get_vtable|_cogl_closure_disconnect|_cogl_onscreen_notify_complete|_cogl_onscreen_notify_frame_sync|_cogl_winsys_egl_renderer_connect_common|_cogl_winsys_error_quark|_cogl_set_error|_cogl_poll_renderer_add_fd|_cogl_poll_renderer_add_idle|_cogl_framebuffer_winsys_update_size|_cogl_winsys_egl_make_current|_cogl_winsys_egl_ensure_current|_cogl_pixel_format_get_bytes_per_pixel).*"
libmutter_cogl_@LIBMUTTER_API_VERSION@_la_SOURCES = $(cogl_sources_c) libmutter_cogl_@LIBMUTTER_API_VERSION@_la_SOURCES = $(cogl_sources_c)
nodist_libmutter_cogl_@LIBMUTTER_API_VERSION@_la_SOURCES = $(BUILT_SOURCES) nodist_libmutter_cogl_@LIBMUTTER_API_VERSION@_la_SOURCES = $(BUILT_SOURCES)

View File

@@ -43,6 +43,7 @@
#include <cogl/winsys/cogl-winsys-private.h> #include <cogl/winsys/cogl-winsys-private.h>
void cogl_renderer_set_custom_winsys (CoglRenderer *renderer, void cogl_renderer_set_custom_winsys (CoglRenderer *renderer,
CoglCustomWinsysVtableGetter winsys_vtable_getter); CoglCustomWinsysVtableGetter winsys_vtable_getter,
void *user_data);
#endif /* __COGL_MUTTER_H___ */ #endif /* __COGL_MUTTER_H___ */

View File

@@ -109,7 +109,11 @@ _cogl_object_default_unref (void *object)
void void
cogl_object_unref (void *obj) cogl_object_unref (void *obj)
{ {
void (* unref_func) (void *) = ((CoglObject *) obj)->klass->virt_unref; void (* unref_func) (void *);
_COGL_RETURN_IF_FAIL (obj != NULL);
unref_func = ((CoglObject *) obj)->klass->virt_unref;
unref_func (obj); unref_func (obj);
} }

View File

@@ -592,7 +592,7 @@ _cogl_rectangles_validate_layer_cb (CoglPipeline *pipeline,
if (!warning_seen) if (!warning_seen)
g_warning ("Skipping layer %d of your pipeline consisting of " g_warning ("Skipping layer %d of your pipeline consisting of "
"a sliced texture (unsuported for multi texturing)", "a sliced texture (unsupported for multi texturing)",
state->i); state->i);
warning_seen = TRUE; warning_seen = TRUE;

View File

@@ -54,6 +54,7 @@ struct _CoglRenderer
const CoglDriverVtable *driver_vtable; const CoglDriverVtable *driver_vtable;
const CoglTextureDriver *texture_driver; const CoglTextureDriver *texture_driver;
const CoglWinsysVtable *winsys_vtable; const CoglWinsysVtable *winsys_vtable;
void *custom_winsys_user_data;
CoglCustomWinsysVtableGetter custom_winsys_vtable_getter; CoglCustomWinsysVtableGetter custom_winsys_vtable_getter;
CoglWinsysID winsys_id_override; CoglWinsysID winsys_id_override;
GList *constraints; GList *constraints;

View File

@@ -566,8 +566,10 @@ _cogl_renderer_choose_driver (CoglRenderer *renderer,
void void
cogl_renderer_set_custom_winsys (CoglRenderer *renderer, cogl_renderer_set_custom_winsys (CoglRenderer *renderer,
CoglCustomWinsysVtableGetter winsys_vtable_getter) CoglCustomWinsysVtableGetter winsys_vtable_getter,
void *user_data)
{ {
renderer->custom_winsys_user_data = user_data;
renderer->custom_winsys_vtable_getter = winsys_vtable_getter; renderer->custom_winsys_vtable_getter = winsys_vtable_getter;
} }

View File

@@ -542,285 +542,6 @@ cogl_texture_set_data (CoglTexture *texture,
error); error);
} }
/* Reads back the contents of a texture by rendering it to the framebuffer
* and reading back the resulting pixels.
*
* It will perform multiple renders if the texture is larger than the
* current glViewport.
*
* It assumes the projection and modelview have already been setup so
* that rendering to 0,0 with the same width and height of the viewport
* will exactly cover the viewport.
*
* NB: Normally this approach isn't normally used since we can just use
* glGetTexImage, but may be used as a fallback in some circumstances.
*/
static CoglBool
do_texture_draw_and_read (CoglFramebuffer *fb,
CoglPipeline *pipeline,
CoglTexture *texture,
CoglBitmap *target_bmp,
float *viewport,
CoglError **error)
{
float rx1, ry1;
float rx2, ry2;
float tx1, ty1;
float tx2, ty2;
int bw, bh;
CoglBitmap *rect_bmp;
unsigned int tex_width, tex_height;
CoglContext *ctx = fb->context;
tex_width = cogl_texture_get_width (texture);
tex_height = cogl_texture_get_height (texture);
ry2 = 0;
ty2 = 0;
/* Walk Y axis until whole bitmap height consumed */
for (bh = tex_height; bh > 0; bh -= viewport[3])
{
/* Rectangle Y coords */
ry1 = ry2;
ry2 += (bh < viewport[3]) ? bh : viewport[3];
/* Normalized texture Y coords */
ty1 = ty2;
ty2 = (ry2 / (float) tex_height);
rx2 = 0;
tx2 = 0;
/* Walk X axis until whole bitmap width consumed */
for (bw = tex_width; bw > 0; bw-=viewport[2])
{
int width;
int height;
/* Rectangle X coords */
rx1 = rx2;
rx2 += (bw < viewport[2]) ? bw : viewport[2];
width = rx2 - rx1;
height = ry2 - ry1;
/* Normalized texture X coords */
tx1 = tx2;
tx2 = (rx2 / (float) tex_width);
/* Draw a portion of texture */
cogl_framebuffer_draw_textured_rectangle (fb,
pipeline,
0, 0,
rx2 - rx1,
ry2 - ry1,
tx1, ty1,
tx2, ty2);
/* Read into a temporary bitmap */
rect_bmp = _cogl_bitmap_new_with_malloc_buffer
(ctx,
width, height,
COGL_PIXEL_FORMAT_RGBA_8888_PRE,
error);
if (!rect_bmp)
return FALSE;
if (!_cogl_framebuffer_read_pixels_into_bitmap
(fb,
viewport[0], viewport[1],
COGL_READ_PIXELS_COLOR_BUFFER,
rect_bmp,
error))
{
cogl_object_unref (rect_bmp);
return FALSE;
}
/* Copy to target bitmap */
if (!_cogl_bitmap_copy_subregion (rect_bmp,
target_bmp,
0, 0,
rx1, ry1,
width,
height,
error))
{
cogl_object_unref (rect_bmp);
return FALSE;
}
/* Free temp bitmap */
cogl_object_unref (rect_bmp);
}
}
return TRUE;
}
/* Reads back the contents of a texture by rendering it to the framebuffer
* and reading back the resulting pixels.
*
* NB: Normally this approach isn't normally used since we can just use
* glGetTexImage, but may be used as a fallback in some circumstances.
*/
static CoglBool
_cogl_texture_draw_and_read (CoglTexture *texture,
CoglBitmap *target_bmp,
GLuint target_gl_format,
GLuint target_gl_type,
CoglError **error)
{
CoglFramebuffer *framebuffer = cogl_get_draw_framebuffer ();
CoglContext *ctx = framebuffer->context;
float save_viewport[4];
float viewport[4];
CoglBool status = FALSE;
viewport[0] = 0;
viewport[1] = 0;
viewport[2] = cogl_framebuffer_get_width (framebuffer);
viewport[3] = cogl_framebuffer_get_height (framebuffer);
cogl_framebuffer_get_viewport4fv (framebuffer, save_viewport);
_cogl_framebuffer_push_projection (framebuffer);
cogl_framebuffer_orthographic (framebuffer,
0, 0,
viewport[2],
viewport[3],
0, 100);
cogl_framebuffer_push_matrix (framebuffer);
cogl_framebuffer_identity_matrix (framebuffer);
/* Direct copy operation */
if (ctx->texture_download_pipeline == NULL)
{
ctx->texture_download_pipeline = cogl_pipeline_new (ctx);
cogl_pipeline_set_blend (ctx->texture_download_pipeline,
"RGBA = ADD (SRC_COLOR, 0)",
NULL);
}
cogl_pipeline_set_layer_texture (ctx->texture_download_pipeline, 0, texture);
cogl_pipeline_set_layer_combine (ctx->texture_download_pipeline,
0, /* layer */
"RGBA = REPLACE (TEXTURE)",
NULL);
cogl_pipeline_set_layer_filters (ctx->texture_download_pipeline, 0,
COGL_PIPELINE_FILTER_NEAREST,
COGL_PIPELINE_FILTER_NEAREST);
if (!do_texture_draw_and_read (framebuffer,
ctx->texture_download_pipeline,
texture, target_bmp, viewport,
error))
return FALSE;
/* XXX: As an alleged PowerVR driver bug workaround where the driver
* is apparently not maintaining the alpha component of some
* framebuffers we render the alpha component of the texture
* separately to be sure we retrieve all components of the texture.
*
* TODO: verify if this is still an issue
*/
if ((_cogl_texture_get_format (texture) & COGL_A_BIT)/* && a_bits == 0*/)
{
uint8_t *srcdata;
uint8_t *dstdata;
uint8_t *srcpixel;
uint8_t *dstpixel;
int target_width = cogl_bitmap_get_width (target_bmp);
int target_height = cogl_bitmap_get_height (target_bmp);
int target_rowstride = cogl_bitmap_get_rowstride (target_bmp);
int bpp = _cogl_pixel_format_get_bytes_per_pixel (COGL_PIXEL_FORMAT_RGBA_8888);
int alpha_rowstride = bpp * target_width;
CoglBitmap *alpha_bmp;
int x,y;
if ((dstdata = _cogl_bitmap_map (target_bmp,
COGL_BUFFER_ACCESS_WRITE,
COGL_BUFFER_MAP_HINT_DISCARD,
error)) == NULL)
goto EXIT;
/* Create temp bitmap for alpha values */
alpha_bmp =
_cogl_bitmap_new_with_malloc_buffer (ctx,
target_width,
target_height,
COGL_PIXEL_FORMAT_RGBA_8888,
error);
if (!alpha_bmp)
{
_cogl_bitmap_unmap (target_bmp);
goto EXIT;
}
/* Draw alpha values into RGB channels */
cogl_pipeline_set_layer_combine (ctx->texture_download_pipeline,
0, /* layer */
"RGBA = REPLACE (TEXTURE[A])",
NULL);
if (!do_texture_draw_and_read (framebuffer,
ctx->texture_download_pipeline,
texture, alpha_bmp, viewport,
error))
{
cogl_object_unref (alpha_bmp);
_cogl_bitmap_unmap (target_bmp);
goto EXIT;
}
/* Copy temp R to target A */
/* Note: we don't try to catch errors since "mapping" an
* malloc buffer should never fail */
srcdata = _cogl_bitmap_map (alpha_bmp,
COGL_BUFFER_ACCESS_READ,
0 /* hints */,
NULL);
for (y=0; y<target_height; ++y)
{
for (x=0; x<target_width; ++x)
{
srcpixel = srcdata + x*bpp;
dstpixel = dstdata + x*bpp;
dstpixel[3] = srcpixel[0];
}
srcdata += alpha_rowstride;
dstdata += target_rowstride;
}
_cogl_bitmap_unmap (alpha_bmp);
_cogl_bitmap_unmap (target_bmp);
cogl_object_unref (alpha_bmp);
}
status = TRUE;
EXIT:
/* Restore old state */
cogl_framebuffer_pop_matrix (framebuffer);
_cogl_framebuffer_pop_projection (framebuffer);
cogl_framebuffer_set_viewport (framebuffer,
save_viewport[0],
save_viewport[1],
save_viewport[2],
save_viewport[3]);
return status;
}
static CoglBool static CoglBool
get_texture_bits_via_offscreen (CoglTexture *meta_texture, get_texture_bits_via_offscreen (CoglTexture *meta_texture,
CoglTexture *sub_texture, CoglTexture *sub_texture,
@@ -1156,25 +877,13 @@ cogl_texture_get_data (CoglTexture *texture,
tg_data.success = FALSE; tg_data.success = FALSE;
} }
/* XXX: In some cases _cogl_texture_2d_download_from_gl may fail /* XXX: In some cases this api may fail to read back the texture
* to read back the texture data; such as for GLES which doesn't * data; such as for GLES which doesn't support glGetTexImage
* support glGetTexImage, so here we fallback to drawing the */
* texture and reading the pixels from the framebuffer. */
if (!tg_data.success) if (!tg_data.success)
{ {
if (!_cogl_texture_draw_and_read (texture, target_bmp, cogl_object_unref (target_bmp);
closest_gl_format, return 0;
closest_gl_type,
&ignore_error))
{
/* We have no more fallbacks so we just give up and
* hope for the best */
g_warning ("Failed to read texture since draw-and-read "
"fallback failed: %s", ignore_error->message);
cogl_error_free (ignore_error);
cogl_object_unref (target_bmp);
return 0;
}
} }
/* Was intermediate used? */ /* Was intermediate used? */

View File

@@ -168,7 +168,7 @@ cogl_xlib_renderer_set_event_retrieval_enabled (CoglRenderer *renderer,
CoglBool enable); CoglBool enable);
/** /**
* cogl_xlib_renderer_set_threaded_swap_wait_enabled: * cogl_xlib_renderer_set_threaded_swap_wait_enabled: (skip)
* @renderer: a #CoglRenderer * @renderer: a #CoglRenderer
* @enable: The new value * @enable: The new value
* *

View File

@@ -1412,22 +1412,12 @@ _cogl_framebuffer_gl_read_pixels_into_bitmap (CoglFramebuffer *framebuffer,
if (!cogl_is_offscreen (framebuffer)) if (!cogl_is_offscreen (framebuffer))
y = framebuffer_height - y - height; y = framebuffer_height - y - height;
required_format = ctx->driver_vtable->pixel_format_to_gl (ctx, required_format = ctx->driver_vtable->pixel_format_to_gl_with_target (ctx,
format, framebuffer->internal_format,
&gl_intformat, format,
&gl_format, &gl_intformat,
&gl_type); &gl_format,
#if HAVE_COGL_GL &gl_type);
/* As we are reading pixels, we want to consider the bitmap according to
* its real pixel format, not the swizzled channels we pretend face to the
* pipeline.
*/
if ((ctx->driver == COGL_DRIVER_GL || ctx->driver == COGL_DRIVER_GL3) &&
(format == COGL_PIXEL_FORMAT_BGRA_8888 ||
format == COGL_PIXEL_FORMAT_BGRA_8888_PRE) &&
_cogl_has_private_feature (ctx, COGL_PRIVATE_FEATURE_TEXTURE_SWIZZLE))
gl_format = GL_BGRA;
#endif
/* NB: All offscreen rendering is done upside down so there is no need /* NB: All offscreen rendering is done upside down so there is no need
* to flip in this case... */ * to flip in this case... */

View File

@@ -90,6 +90,11 @@ typedef struct _CoglWinsysEGLVtable
(* add_config_attributes) (CoglDisplay *display, (* add_config_attributes) (CoglDisplay *display,
CoglFramebufferConfig *config, CoglFramebufferConfig *config,
EGLint *attributes); EGLint *attributes);
CoglBool
(* choose_config) (CoglDisplay *display,
EGLint *attributes,
EGLConfig *out_config,
CoglError **error);
} CoglWinsysEGLVtable; } CoglWinsysEGLVtable;
typedef enum _CoglEGLWinsysFeature typedef enum _CoglEGLWinsysFeature
@@ -176,6 +181,9 @@ _cogl_winsys_egl_make_current (CoglDisplay *display,
EGLSurface read, EGLSurface read,
EGLContext context); EGLContext context);
EGLBoolean
_cogl_winsys_egl_ensure_current (CoglDisplay *display);
#ifdef EGL_KHR_image_base #ifdef EGL_KHR_image_base
EGLImageKHR EGLImageKHR
_cogl_egl_create_image (CoglContext *ctx, _cogl_egl_create_image (CoglContext *ctx,

View File

@@ -336,6 +336,32 @@ _cogl_winsys_egl_add_config_attributes (CoglDisplay *display,
return i; return i;
} }
static CoglBool
_cogl_winsys_egl_choose_config (CoglDisplay *display,
EGLint *attributes,
EGLConfig *out_config,
CoglError **error)
{
CoglRenderer *renderer = display->renderer;
CoglRendererEGL *egl_renderer = renderer->winsys;
EGLint config_count = 0;
EGLBoolean status;
status = eglChooseConfig (egl_renderer->edpy,
attributes,
out_config, 1,
&config_count);
if (status != EGL_TRUE || config_count == 0)
{
_cogl_set_error (error, COGL_WINSYS_ERROR,
COGL_WINSYS_ERROR_CREATE_CONTEXT,
"No compatible EGL configs found");
return FALSE;
}
return TRUE;
}
static CoglBool static CoglBool
_cogl_winsys_egl_display_setup (CoglDisplay *display, _cogl_winsys_egl_display_setup (CoglDisplay *display,
CoglError **error) CoglError **error)
@@ -841,6 +867,7 @@ static const CoglWinsysEGLVtable
_cogl_winsys_egl_vtable = _cogl_winsys_egl_vtable =
{ {
.add_config_attributes = _cogl_winsys_egl_add_config_attributes, .add_config_attributes = _cogl_winsys_egl_add_config_attributes,
.choose_config = _cogl_winsys_egl_choose_config,
.display_setup = _cogl_winsys_egl_display_setup, .display_setup = _cogl_winsys_egl_display_setup,
.display_destroy = _cogl_winsys_egl_display_destroy, .display_destroy = _cogl_winsys_egl_display_destroy,
.context_created = _cogl_winsys_egl_context_created, .context_created = _cogl_winsys_egl_context_created,

View File

@@ -309,6 +309,18 @@ _cogl_winsys_egl_make_current (CoglDisplay *display,
return ret; return ret;
} }
EGLBoolean
_cogl_winsys_egl_ensure_current (CoglDisplay *display)
{
CoglDisplayEGL *egl_display = display->winsys;
CoglRendererEGL *egl_renderer = display->renderer->winsys;
return eglMakeCurrent (egl_renderer->edpy,
egl_display->current_draw_surface,
egl_display->current_read_surface,
egl_display->current_context);
}
static void static void
cleanup_context (CoglDisplay *display) cleanup_context (CoglDisplay *display)
{ {
@@ -338,10 +350,9 @@ try_create_context (CoglDisplay *display,
CoglRendererEGL *egl_renderer = renderer->winsys; CoglRendererEGL *egl_renderer = renderer->winsys;
EGLDisplay edpy; EGLDisplay edpy;
EGLConfig config; EGLConfig config;
EGLint config_count = 0;
EGLBoolean status;
EGLint attribs[9]; EGLint attribs[9];
EGLint cfg_attribs[MAX_EGL_CONFIG_ATTRIBS]; EGLint cfg_attribs[MAX_EGL_CONFIG_ATTRIBS];
GError *config_error = NULL;
const char *error_message; const char *error_message;
_COGL_RETURN_VAL_IF_FAIL (egl_display->egl_context == NULL, TRUE); _COGL_RETURN_VAL_IF_FAIL (egl_display->egl_context == NULL, TRUE);
@@ -356,14 +367,16 @@ try_create_context (CoglDisplay *display,
edpy = egl_renderer->edpy; edpy = egl_renderer->edpy;
status = eglChooseConfig (edpy, if (!egl_renderer->platform_vtable->choose_config (display,
cfg_attribs, cfg_attribs,
&config, 1, &config,
&config_count); &config_error))
if (status != EGL_TRUE || config_count == 0)
{ {
error_message = "Unable to find a usable EGL configuration"; _cogl_set_error (error, COGL_WINSYS_ERROR,
goto fail; COGL_WINSYS_ERROR_CREATE_CONTEXT,
"Couldn't choose config: %s", config_error->message);
g_error_free (config_error);
goto err;
} }
egl_display->egl_config = config; egl_display->egl_config = config;
@@ -419,6 +432,7 @@ fail:
COGL_WINSYS_ERROR_CREATE_CONTEXT, COGL_WINSYS_ERROR_CREATE_CONTEXT,
"%s", error_message); "%s", error_message);
err:
cleanup_context (display); cleanup_context (display);
return FALSE; return FALSE;

View File

@@ -1,15 +1,15 @@
AC_PREREQ(2.62) AC_PREREQ(2.62)
m4_define([mutter_major_version], [3]) m4_define([mutter_major_version], [3])
m4_define([mutter_minor_version], [26]) m4_define([mutter_minor_version], [29])
m4_define([mutter_micro_version], [1]) m4_define([mutter_micro_version], [3])
m4_define([mutter_version], m4_define([mutter_version],
[mutter_major_version.mutter_minor_version.mutter_micro_version]) [mutter_major_version.mutter_minor_version.mutter_micro_version])
m4_define([mutter_plugin_api_version], [3]) m4_define([mutter_plugin_api_version], [3])
m4_define([libmutter_api_version], [1]) m4_define([libmutter_api_version], [3])
AC_INIT([mutter], [mutter_version], AC_INIT([mutter], [mutter_version],
[http://bugzilla.gnome.org/enter_bug.cgi?product=mutter]) [http://bugzilla.gnome.org/enter_bug.cgi?product=mutter])
@@ -80,6 +80,7 @@ CANBERRA_GTK_VERSION=0.26
LIBWACOM_VERSION=0.13 LIBWACOM_VERSION=0.13
MUTTER_PC_MODULES=" MUTTER_PC_MODULES="
gl
egl egl
gtk+-3.0 >= 3.19.8 gtk+-3.0 >= 3.19.8
gio-unix-2.0 >= 2.35.1 gio-unix-2.0 >= 2.35.1
@@ -104,6 +105,7 @@ MUTTER_PC_MODULES="
xcb-randr xcb-randr
xcb-res xcb-res
" "
XWAYLAND_GRAB_DEFAULT_ACCESS_RULES="gnome-boxes,remote-viewer,virt-viewer,virt-manager,vinagre,vncviewer,Xephyr"
GLIB_GSETTINGS GLIB_GSETTINGS
@@ -239,12 +241,11 @@ else
fi fi
AC_ARG_ENABLE(remote-desktop, AC_ARG_ENABLE(remote-desktop,
AS_HELP_STRING([--enable-remote-desktop], [enable support for remote desktop and screen cast]), AS_HELP_STRING([--enable-remote-desktop], [enable support for remote desktop and screen cast]),,
enable_remote_desktop=yes,
enable_remote_desktop=no enable_remote_desktop=no
) )
AS_IF([test "$enable_remote_desktop" = "yes"], [ AS_IF([test "$enable_remote_desktop" = "yes"], [
MUTTER_PC_MODULES="$MUTTER_PC_MODULES libpipewire-0.1 >= 0.1.4" MUTTER_PC_MODULES="$MUTTER_PC_MODULES libpipewire-0.1 >= 0.1.8"
AC_DEFINE([HAVE_REMOTE_DESKTOP],[1], [Defined if screen cast and remote desktop support is enabled]) AC_DEFINE([HAVE_REMOTE_DESKTOP],[1], [Defined if screen cast and remote desktop support is enabled])
]) ])
AM_CONDITIONAL([HAVE_REMOTE_DESKTOP],[test "$enable_remote_desktop" = "yes"]) AM_CONDITIONAL([HAVE_REMOTE_DESKTOP],[test "$enable_remote_desktop" = "yes"])
@@ -261,7 +262,19 @@ AC_SUBST(XWAYLAND_PATH)
PKG_CHECK_MODULES(MUTTER, $MUTTER_PC_MODULES) PKG_CHECK_MODULES(MUTTER, $MUTTER_PC_MODULES)
MUTTER_NATIVE_BACKEND_MODULES="libdrm libsystemd libinput >= 1.4 gudev-1.0 gbm >= 10.3" PKG_CHECK_MODULES(ELOGIND, [libelogind], [have_elogind=yes], [have_elogind=no])
if test x$have_elogind = xyes; then
logind_provider="libelogind"
fi
PKG_CHECK_MODULES(SYSTEMD, [libsystemd], [have_systemd=yes], [have_systemd=no])
if test x$have_systemd = xyes -o -z "$logind_provider"; then
logind_provider="libsystemd"
fi
MUTTER_NATIVE_BACKEND_MODULES="libdrm $logind_provider libinput >= 1.4 gudev-1.0 gbm >= 10.3"
AC_ARG_ENABLE(native-backend, AC_ARG_ENABLE(native-backend,
AS_HELP_STRING([--disable-native-backend], [disable mutter native (KMS) backend]),, AS_HELP_STRING([--disable-native-backend], [disable mutter native (KMS) backend]),,
@@ -277,14 +290,24 @@ AS_IF([test "$have_native_backend" = "yes"], [
]) ])
AM_CONDITIONAL([HAVE_NATIVE_BACKEND],[test "$have_native_backend" = "yes"]) AM_CONDITIONAL([HAVE_NATIVE_BACKEND],[test "$have_native_backend" = "yes"])
MUTTER_WAYLAND_EGLSTREAM_MODULES="wayland-eglstream-protocols"
AC_ARG_ENABLE(egl-device, AC_ARG_ENABLE(egl-device,
AS_HELP_STRING([--enable-egl-device], [enable support for EGLDevice on top of KMS]), AS_HELP_STRING([--enable-egl-device], [enable support for EGLDevice on top of KMS]),,
enable_egl_device=yes,
enable_egl_device=no enable_egl_device=no
have_wayland_eglstream=no
) )
AS_IF([test "$enable_egl_device" = "yes"], [ AS_IF([test "$enable_egl_device" = "yes"], [
AC_DEFINE([HAVE_EGL_DEVICE],[1], [Defined if EGLDevice support is enabled]) AC_DEFINE([HAVE_EGL_DEVICE],[1], [Defined if EGLDevice support is enabled])
PKG_CHECK_EXISTS([$MUTTER_WAYLAND_EGLSTREAM_MODULES], [have_wayland_eglstream=yes], [have_wayland_eglstream=no])
]) ])
AS_IF([test "$have_wayland_eglstream" = "yes"], [
AC_DEFINE([HAVE_WAYLAND_EGLSTREAM],[1],[Defined if Wayland EGLStream protocols are available])
PKG_CHECK_MODULES(WAYLAND_EGLSTREAM, [$MUTTER_WAYLAND_EGLSTREAM_MODULES],
[ac_wayland_eglstream_pkgdatadir=`$PKG_CONFIG --variable=pkgdatadir $MUTTER_WAYLAND_EGLSTREAM_MODULES`])
AC_SUBST(WAYLAND_EGLSTREAM_DATADIR, $ac_wayland_eglstream_pkgdatadir)
])
AM_CONDITIONAL([HAVE_WAYLAND_EGLSTREAM],[test "$have_wayland_eglstream" = "yes"])
MUTTER_WAYLAND_MODULES="wayland-server >= 1.13.0" MUTTER_WAYLAND_MODULES="wayland-server >= 1.13.0"
@@ -303,12 +326,27 @@ AS_IF([test "$have_wayland" = "yes"], [
AC_SUBST([WAYLAND_SCANNER]) AC_SUBST([WAYLAND_SCANNER])
AC_DEFINE([HAVE_WAYLAND],[1],[Define if you want to enable Wayland support]) AC_DEFINE([HAVE_WAYLAND],[1],[Define if you want to enable Wayland support])
PKG_CHECK_MODULES(WAYLAND_PROTOCOLS, [wayland-protocols >= 1.9], PKG_CHECK_MODULES(WAYLAND_PROTOCOLS, [wayland-protocols >= 1.12],
[ac_wayland_protocols_pkgdatadir=`$PKG_CONFIG --variable=pkgdatadir wayland-protocols`]) [ac_wayland_protocols_pkgdatadir=`$PKG_CONFIG --variable=pkgdatadir wayland-protocols`])
AC_SUBST(WAYLAND_PROTOCOLS_DATADIR, $ac_wayland_protocols_pkgdatadir) AC_SUBST(WAYLAND_PROTOCOLS_DATADIR, $ac_wayland_protocols_pkgdatadir)
]) ])
AM_CONDITIONAL([HAVE_WAYLAND],[test "$have_wayland" = "yes"]) AM_CONDITIONAL([HAVE_WAYLAND],[test "$have_wayland" = "yes"])
AC_ARG_WITH([xwayland-grab-default-access-rules],
[AS_HELP_STRING([--with-xwayland-grab-default-access-rules="app-res1,app-res2,..."],
[comma delimited list of applications ressources or class allowed to issue X11 grabs in Xwayland"])],
[with_XWAYLAND_GRAB_DEFAULT_ACCESS_RULES="$withval"],
[with_XWAYLAND_GRAB_DEFAULT_ACCESS_RULES="$XWAYLAND_GRAB_DEFAULT_ACCESS_RULES"])
case "$with_XWAYLAND_GRAB_DEFAULT_ACCESS_RULES" in
yes) with_XWAYLAND_GRAB_DEFAULT_ACCESS_RULES="$XWAYLAND_GRAB_DEFAULT_ACCESS_RULES" ;;
no) with_XWAYLAND_GRAB_DEFAULT_ACCESS_RULES='' ;;
esac
AC_DEFINE_UNQUOTED([XWAYLAND_GRAB_DEFAULT_ACCESS_RULES],
"$with_XWAYLAND_GRAB_DEFAULT_ACCESS_RULES",
[Xwayland applications allowed to issue keyboard grabs])
AC_SUBST(XWAYLAND_GRAB_DEFAULT_ACCESS_RULES)
PKG_CHECK_EXISTS([xi >= 1.6.99.1], PKG_CHECK_EXISTS([xi >= 1.6.99.1],
AC_DEFINE([HAVE_XI23],[1],[Define if you have support for XInput 2.3 or greater])) AC_DEFINE([HAVE_XI23],[1],[Define if you have support for XInput 2.3 or greater]))
@@ -522,6 +560,7 @@ mutter-$VERSION
Introspection: ${found_introspection} Introspection: ${found_introspection}
Session management: ${found_sm} Session management: ${found_sm}
Wayland: ${have_wayland} Wayland: ${have_wayland}
Wayland EGLStream: ${have_wayland_eglstream}
Native (KMS) backend: ${have_native_backend} Native (KMS) backend: ${have_native_backend}
EGLDevice: ${enable_egl_device} EGLDevice: ${enable_egl_device}
Remote desktop: ${enable_remote_desktop} Remote desktop: ${enable_remote_desktop}

View File

@@ -20,12 +20,6 @@
<KeyListEntry name="move-to-workspace-last" <KeyListEntry name="move-to-workspace-last"
description="Move window to last workspace" /> description="Move window to last workspace" />
<KeyListEntry name="move-to-workspace-left"
description="Move window one workspace to the left" />
<KeyListEntry name="move-to-workspace-right"
description="Move window one workspace to the right" />
<KeyListEntry name="move-to-workspace-up" <KeyListEntry name="move-to-workspace-up"
description="Move window one workspace up" /> description="Move window one workspace up" />
@@ -125,12 +119,6 @@
<KeyListEntry name="switch-to-workspace-last" <KeyListEntry name="switch-to-workspace-last"
description="Switch to last workspace" /> description="Switch to last workspace" />
<KeyListEntry name="switch-to-workspace-left"
description="Move to workspace left" />
<KeyListEntry name="switch-to-workspace-right"
description="Move to workspace right" />
<KeyListEntry name="switch-to-workspace-up" <KeyListEntry name="switch-to-workspace-up"
description="Move to workspace above" /> description="Move to workspace above" />

View File

@@ -0,0 +1,10 @@
<?xml version="1.0" encoding="UTF-8" ?>
<KeyListEntries schema="org.gnome.mutter.wayland.keybindings"
group="system"
name="System"
wm_name="Mutter"
package="mutter">
<KeyListEntry name="restore-shortcuts" description="Restore the keyboard shortcuts"/>
</KeyListEntries>

View File

@@ -15,8 +15,6 @@
<KeyListEntry name="unmaximize" description="Restore window"/> <KeyListEntry name="unmaximize" description="Restore window"/>
<KeyListEntry name="toggle-shaded" description="Toggle shaded state"/>
<KeyListEntry name="close" description="Close window"/> <KeyListEntry name="close" description="Close window"/>
<KeyListEntry name="minimize" description="Hide window"/> <KeyListEntry name="minimize" description="Hide window"/>

View File

@@ -12,6 +12,11 @@ xml_DATA = \
50-mutter-system.xml \ 50-mutter-system.xml \
50-mutter-windows.xml 50-mutter-windows.xml
if HAVE_WAYLAND
xml_DATA += \
50-mutter-wayland.xml
endif
gschema_in_files = \ gschema_in_files = \
org.gnome.mutter.gschema.xml.in \ org.gnome.mutter.gschema.xml.in \
org.gnome.mutter.wayland.gschema.xml.in org.gnome.mutter.wayland.gschema.xml.in
@@ -19,6 +24,7 @@ gsettings_SCHEMAS = $(gschema_in_files:.xml.in=.xml)
%.gschema.xml: %.gschema.xml.in Makefile %.gschema.xml: %.gschema.xml.in Makefile
$(AM_V_GEN) sed -e 's|@GETTEXT_DOMAIN[@]|$(GETTEXT_PACKAGE)|g' \ $(AM_V_GEN) sed -e 's|@GETTEXT_DOMAIN[@]|$(GETTEXT_PACKAGE)|g' \
-e 's|@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES[@]|$(XWAYLAND_GRAB_DEFAULT_ACCESS_RULES)|g' \
$< > $@ || rm $@ $< > $@ || rm $@
@GSETTINGS_RULES@ @GSETTINGS_RULES@

View File

@@ -120,10 +120,6 @@
framebuffers instead of window content, framebuffers instead of window content,
to manage HiDPI monitors. Does not to manage HiDPI monitors. Does not
require a restart. require a restart.
• “remote-desktop” — enables remote desktop support. To support
remote desktop with screen sharing,
“screen-cast” must also be enabled.
• “screen-cast” — enables screen cast support.
</description> </description>
</key> </key>

View File

@@ -50,8 +50,52 @@
<summary>Switch to VT 12</summary> <summary>Switch to VT 12</summary>
</key> </key>
<key name="restore-shortcuts" type="as"> <key name="restore-shortcuts" type="as">
<default><![CDATA[['<Shift><Control>Escape']]]></default> <default><![CDATA[['<Super>Escape']]]></default>
<summary>Re-enable shortcuts</summary> <summary>Re-enable shortcuts</summary>
</key> </key>
</schema> </schema>
<schema id="org.gnome.mutter.wayland" path="/org/gnome/mutter/wayland/"
gettext-domain="@GETTEXT_DOMAIN@">
<key name="xwayland-allow-grabs" type="b">
<default>false</default>
<summary>Allow grabs with Xwayland</summary>
<description>
Allow keyboard grabs issued by X11 applications running in Xwayland
to be taken into account.
For a X11 grab to be taken into account under Wayland, the client must
also either send a specific X11 ClientMessage to the root window or be
among the applications white-listed in key “xwayland-grab-access-rules”.
</description>
</key>
<key name="xwayland-grab-access-rules" type="as">
<default>[]</default>
<summary>Xwayland applications allowed to issue keyboard grabs</summary>
<description>
List the resource names or resource class of X11 windows either
allowed or not allowed to issue X11 keyboard grabs under Xwayland.
The resource name or resource class of a given X11 window can be
obtained using the command “xprop WM_CLASS”.
Wildcards “*” and jokers “?” in the values are supported.
Values starting with “!” are blacklisted, which has precedence over
the whitelist, to revoke applications from the default system list.
The default system list includes the following applications:
“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@”
Users can break an existing grab by using the specific keyboard
shortcut defined by the keybinding key “restore-shortcuts”.
</description>
</key>
</schema>
</schemalist> </schemalist>

View File

@@ -2,6 +2,7 @@
# Please keep this file sorted alphabetically. # Please keep this file sorted alphabetically.
data/50-mutter-navigation.xml data/50-mutter-navigation.xml
data/50-mutter-system.xml data/50-mutter-system.xml
data/50-mutter-wayland.xml
data/50-mutter-windows.xml data/50-mutter-windows.xml
data/mutter.desktop.in data/mutter.desktop.in
data/org.gnome.mutter.gschema.xml.in data/org.gnome.mutter.gschema.xml.in
@@ -13,18 +14,18 @@ src/compositor/meta-background.c
src/core/bell.c src/core/bell.c
src/core/core.c src/core/core.c
src/core/display.c src/core/display.c
src/core/errors.c
src/core/keybindings.c src/core/keybindings.c
src/core/main.c src/core/main.c
src/core/meta-close-dialog-default.c src/core/meta-close-dialog-default.c
src/core/mutter.c src/core/mutter.c
src/core/prefs.c src/core/prefs.c
src/core/screen.c
src/core/util.c src/core/util.c
src/core/window.c src/core/window.c
src/ui/frames.c src/ui/frames.c
src/ui/theme.c src/ui/theme.c
src/wayland/meta-wayland-tablet-pad.c src/wayland/meta-wayland-tablet-pad.c
src/x11/meta-x11-display.c
src/x11/meta-x11-errors.c
src/x11/session.c src/x11/session.c
src/x11/window-props.c src/x11/window-props.c
src/x11/xprops.c src/x11/xprops.c

View File

@@ -28,6 +28,7 @@ clutter/clutter/clutter-grid-layout.c
clutter/clutter/clutter-image.c clutter/clutter/clutter-image.c
clutter/clutter/clutter-input-device.c clutter/clutter/clutter-input-device.c
clutter/clutter/clutter-input-device-tool.c clutter/clutter/clutter-input-device-tool.c
clutter/clutter/clutter-input-method.c
clutter/clutter/clutter-interval.c clutter/clutter/clutter-interval.c
clutter/clutter/clutter-layout-manager.c clutter/clutter/clutter-layout-manager.c
clutter/clutter/clutter-layout-meta.c clutter/clutter/clutter-layout-meta.c

771
po/ar.po
View File

@@ -11,8 +11,8 @@ msgstr ""
"Project-Id-Version: metacity.HEAD\n" "Project-Id-Version: metacity.HEAD\n"
"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=mutter&" "Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=mutter&"
"keywords=I18N+L10N&component=general\n" "keywords=I18N+L10N&component=general\n"
"POT-Creation-Date: 2017-06-18 21:26+0200\n" "POT-Creation-Date: 2017-11-03 10:20+0200\n"
"PO-Revision-Date: 2017-06-18 21:27+0200\n" "PO-Revision-Date: 2017-11-03 10:22+0200\n"
"Last-Translator: Khaled Hosny <khaledhosny@eglug.org>\n" "Last-Translator: Khaled Hosny <khaledhosny@eglug.org>\n"
"Language-Team: Arabic <doc@arabeyes.org>\n" "Language-Team: Arabic <doc@arabeyes.org>\n"
"Language: ar\n" "Language: ar\n"
@@ -24,448 +24,10 @@ msgstr ""
"X-Generator: Virtaal 1.0.0-beta1\n" "X-Generator: Virtaal 1.0.0-beta1\n"
"X-Project-Style: gnome\n" "X-Project-Style: gnome\n"
#: data/50-mutter-navigation.xml:6
msgid "Navigation"
msgstr "الإبحار"
#: data/50-mutter-navigation.xml:9
msgid "Move window to workspace 1"
msgstr "انقل النافذة إلى مساحة العمل 1"
#: data/50-mutter-navigation.xml:12
msgid "Move window to workspace 2"
msgstr "انقل النافذة إلى مساحة العمل 2"
#: data/50-mutter-navigation.xml:15
msgid "Move window to workspace 3"
msgstr "انقل النافذة إلى مساحة العمل 3"
#: data/50-mutter-navigation.xml:18
msgid "Move window to workspace 4"
msgstr "انقل النافذة إلى مساحة العمل 4"
#: data/50-mutter-navigation.xml:21
msgid "Move window to last workspace"
msgstr "انقل النافذة إلى مساحة العمل الأخيرة"
#: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "انقل النافذة مساحة عمل واحدة إلى اليسار"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "انقل النافذة مساحة عمل واحدة إلى اليمين"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up"
msgstr "انقل النافذة مساحة عمل واحدة إلى الأعلى"
#: data/50-mutter-navigation.xml:33
msgid "Move window one workspace down"
msgstr "انقل النافذة مساحة عمل واحدة إلى الأسفل"
#: data/50-mutter-navigation.xml:36
msgid "Move window one monitor to the left"
msgstr "انقل النافذة شاشة واحدة إلى اليسار"
#: data/50-mutter-navigation.xml:39
msgid "Move window one monitor to the right"
msgstr "انقل النافذة شاشة واحدة إلى اليمين"
#: data/50-mutter-navigation.xml:42
msgid "Move window one monitor up"
msgstr "انقل النافذة شاشة واحدة إلى الأعلى"
#: data/50-mutter-navigation.xml:45
msgid "Move window one monitor down"
msgstr "انقل النافذة شاشة واحدة إلى الأسفل"
#: data/50-mutter-navigation.xml:49
msgid "Switch applications"
msgstr "تنقل بين التطبيقات"
#: data/50-mutter-navigation.xml:54
msgid "Switch to previous application"
msgstr "انتقل إلى التطبيق السابق"
#: data/50-mutter-navigation.xml:58
msgid "Switch windows"
msgstr "تنقل بين النوافذ"
#: data/50-mutter-navigation.xml:63
msgid "Switch to previous window"
msgstr "انتقل إلى النافذة السابقة"
#: data/50-mutter-navigation.xml:67
msgid "Switch windows of an application"
msgstr "تنقل بين نوافذ التطبيق"
#: data/50-mutter-navigation.xml:72
msgid "Switch to previous window of an application"
msgstr "انتقل إلى نافذة التطبيق السابقة"
#: data/50-mutter-navigation.xml:76
msgid "Switch system controls"
msgstr "تنقل بين تحكمات النظام"
#: data/50-mutter-navigation.xml:81
msgid "Switch to previous system control"
msgstr "انتقل إلى تحكم النظام السابق"
#: data/50-mutter-navigation.xml:85
msgid "Switch windows directly"
msgstr "تنقل مباشرة بين النوافذ"
#: data/50-mutter-navigation.xml:90
msgid "Switch directly to previous window"
msgstr "انتقل مباشرة إلى النافذة السابقة"
#: data/50-mutter-navigation.xml:94
msgid "Switch windows of an app directly"
msgstr "تنقل مباشرة بين نوافذ التطبيق"
#: data/50-mutter-navigation.xml:99
msgid "Switch directly to previous window of an app"
msgstr "انتقل مباشرة إلى نافذة التطبيق السابقة"
#: data/50-mutter-navigation.xml:103
msgid "Switch system controls directly"
msgstr "تنقل مباشرة بين تحكمات النظام"
#: data/50-mutter-navigation.xml:108
msgid "Switch directly to previous system control"
msgstr "انتقل مباشرة إلى تحكم النظام السابق"
#: data/50-mutter-navigation.xml:111
msgid "Hide all normal windows"
msgstr "أخفِ كل النوافذ العادية"
#: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 1"
msgstr "انتقل إلى مساحة العمل 1"
#: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 2"
msgstr "انتقل إلى مساحة العمل 2"
#: data/50-mutter-navigation.xml:120
msgid "Switch to workspace 3"
msgstr "انتقل إلى مساحة العمل 3"
#: data/50-mutter-navigation.xml:123
msgid "Switch to workspace 4"
msgstr "انتقل إلى مساحة العمل 4"
#: data/50-mutter-navigation.xml:126
msgid "Switch to last workspace"
msgstr "انتقل إلى مساحة العمل الأخيرة"
#: data/50-mutter-navigation.xml:129
msgid "Move to workspace left"
msgstr "انقل لمساحة العمل على اليسار"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "انقل لمساحة العمل على اليمين"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above"
msgstr "انقل لمساحة العمل أعلى"
#: data/50-mutter-navigation.xml:138
msgid "Move to workspace below"
msgstr "انقل لمساحة العمل أسفل"
#: data/50-mutter-system.xml:6
msgid "System"
msgstr "النظام"
#: data/50-mutter-system.xml:8
msgid "Show the run command prompt"
msgstr "أظهر محث تشغيل أمر"
#: data/50-mutter-system.xml:10
msgid "Show the activities overview"
msgstr "أظهر نظرة عامة على الأنشطة"
#: data/50-mutter-windows.xml:6
msgid "Windows"
msgstr "النوافذ"
#: data/50-mutter-windows.xml:8
msgid "Activate the window menu"
msgstr "فعّل قائمة النافذة"
#: data/50-mutter-windows.xml:10
msgid "Toggle fullscreen mode"
msgstr "بدّل نمط ملء الشاشة"
#: data/50-mutter-windows.xml:12
msgid "Toggle maximization state"
msgstr "بدّل حالة التكبير"
#: data/50-mutter-windows.xml:14
msgid "Maximize window"
msgstr "كبّر النّافذة"
#: data/50-mutter-windows.xml:16
msgid "Restore window"
msgstr "استعد النّافذة"
#: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "بدّل حالة الإخفاء"
#: data/50-mutter-windows.xml:20
msgid "Close window"
msgstr "أغلق النّافذة"
#: data/50-mutter-windows.xml:22
msgid "Hide window"
msgstr "أخفِ النّافذة"
#: data/50-mutter-windows.xml:24
msgid "Move window"
msgstr "انقل النّافذة"
#: data/50-mutter-windows.xml:26
msgid "Resize window"
msgstr "حجّم النّافذة"
#: data/50-mutter-windows.xml:29
msgid "Toggle window on all workspaces or one"
msgstr "بدّل حالة ظهور النافذة على جميع مساحات العمل أو واحدة منها"
#: data/50-mutter-windows.xml:31
msgid "Raise window if covered, otherwise lower it"
msgstr "ارفع النافذة إذا كانت أخرى تغطيها، أو أخفضها في ما عدا ذلك"
#: data/50-mutter-windows.xml:33
msgid "Raise window above other windows"
msgstr "ارفع النافذة فوق النوافذ الأخرى"
#: data/50-mutter-windows.xml:35
msgid "Lower window below other windows"
msgstr "اخفض النافذة تحت النوافذ الأخرى"
#: data/50-mutter-windows.xml:37
msgid "Maximize window vertically"
msgstr "كبّر النافذة رأسيا"
#: data/50-mutter-windows.xml:39
msgid "Maximize window horizontally"
msgstr "كبّر النافذة أفقيا"
#: data/50-mutter-windows.xml:43
msgid "View split on left"
msgstr "المنظور مقسوم على اليمين"
#: data/50-mutter-windows.xml:47
msgid "View split on right"
msgstr "المنظور مقسوم على اليسار"
#: data/mutter.desktop.in:4
msgid "Mutter"
msgstr "مَتَر"
#: data/org.gnome.mutter.gschema.xml.in:7
msgid "Modifier to use for extended window management operations"
msgstr "المغير الذي سيُستعمل لتمديد عمليات إدارة النوافذ "
#: data/org.gnome.mutter.gschema.xml.in:8
msgid ""
"This key will initiate the “overlay”, which is a combination window overview "
"and application launching system. The default is intended to be the “Windows "
"key” on PC hardware. Its expected that this binding either the default or "
"set to the empty string."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:20
msgid "Attach modal dialogs"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:21
msgid ""
"When true, instead of having independent titlebars, modal dialogs appear "
"attached to the titlebar of the parent window and are moved together with "
"the parent window."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:30
msgid "Enable edge tiling when dropping windows on screen edges"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:31
msgid ""
"If enabled, dropping windows on vertical screen edges maximizes them "
"vertically and resizes them horizontally to cover half of the available "
"area. Dropping windows on the top screen edge maximizes them completely."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:40
msgid "Workspaces are managed dynamically"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:41
msgid ""
"Determines whether workspaces are managed dynamically or whether theres a "
"static number of workspaces (determined by the num-workspaces key in org."
"gnome.desktop.wm.preferences)."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:50
msgid "Workspaces only on primary"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:51
msgid ""
"Determines whether workspace switching should happen for windows on all "
"monitors or only for windows on the primary monitor."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:59
msgid "No tab popup"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:60
msgid ""
"Determines whether the use of popup and highlight frame should be disabled "
"for window cycling."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:68
msgid "Delay focus changes until the pointer stops moving"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:69
msgid ""
"If set to true, and the focus mode is either “sloppy” or “mouse” then the "
"focus will not be changed immediately when entering a window, but only after "
"the pointer stops moving."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:79
msgid "Draggable border width"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:80
msgid ""
"The amount of total draggable borders. If the themes visible borders are "
"not enough, invisible borders will be added to meet this value."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:89
msgid "Auto maximize nearly monitor sized windows"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:90
msgid ""
"If enabled, new windows that are initially the size of the monitor "
"automatically get maximized."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:98
msgid "Place new windows in the center"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:99
msgid ""
"When true, the new windows will always be put in the center of the active "
"screen of the monitor."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:107
msgid "Enable experimental features"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:108
msgid ""
"To enable experimental features, add the feature keyword to the list. "
"Whether the feature requires restarting the compositor depends on the given "
"feature. Any experimental feature is not required to still be available, or "
"configurable. Dont expect adding anything in this setting to be future "
"proof. Currently possible keywords: • “monitor-config-manager” — use the new "
"monitor configuration system, aimed to replace the old one. This enables a "
"higher level configuration API to be used by configuration applications, as "
"well as the ability to configure per logical monitor scale. • “scale-monitor-"
"framebuffer” — makes mutter default to layout logical monitors in a logical "
"pixel coordinate space, while scaling monitor framebuffers instead of window "
"content, to manage HiDPI monitors. Does not require a restart. Also enabling "
"“monitor-config-manager” is required for this feature to be enabled."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:151
msgid "Select window from tab popup"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:156
msgid "Cancel tab popup"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:6
#, fuzzy
msgid "Switch to VT 1"
msgstr "انتقل إلى مساحة العمل 1"
#: data/org.gnome.mutter.wayland.gschema.xml.in:10
#, fuzzy
msgid "Switch to VT 2"
msgstr "انتقل إلى مساحة العمل 2"
#: data/org.gnome.mutter.wayland.gschema.xml.in:14
#, fuzzy
msgid "Switch to VT 3"
msgstr "انتقل إلى مساحة العمل 3"
#: data/org.gnome.mutter.wayland.gschema.xml.in:18
#, fuzzy
msgid "Switch to VT 4"
msgstr "انتقل إلى مساحة العمل 4"
#: data/org.gnome.mutter.wayland.gschema.xml.in:22
#, fuzzy
msgid "Switch to VT 5"
msgstr "انتقل إلى مساحة العمل 5"
#: data/org.gnome.mutter.wayland.gschema.xml.in:26
#, fuzzy
msgid "Switch to VT 6"
msgstr "انتقل إلى مساحة العمل 6"
#: data/org.gnome.mutter.wayland.gschema.xml.in:30
#, fuzzy
msgid "Switch to VT 7"
msgstr "انتقل إلى مساحة العمل 7"
#: data/org.gnome.mutter.wayland.gschema.xml.in:34
#, fuzzy
msgid "Switch to VT 8"
msgstr "انتقل إلى مساحة العمل 8"
#: data/org.gnome.mutter.wayland.gschema.xml.in:38
#, fuzzy
msgid "Switch to VT 9"
msgstr "انتقل إلى مساحة العمل 9"
#: data/org.gnome.mutter.wayland.gschema.xml.in:42
#, fuzzy
msgid "Switch to VT 10"
msgstr "انتقل إلى مساحة العمل 10"
#: data/org.gnome.mutter.wayland.gschema.xml.in:46
#, fuzzy
msgid "Switch to VT 11"
msgstr "انتقل إلى مساحة العمل 11"
#: data/org.gnome.mutter.wayland.gschema.xml.in:50
#, fuzzy
msgid "Switch to VT 12"
msgstr "انتقل إلى مساحة العمل 12"
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:1866 #: ../src/backends/meta-input-settings.c:2167
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "" msgstr ""
@@ -473,113 +35,113 @@ msgstr ""
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:1888 #: ../src/backends/meta-input-settings.c:2190
msgid "Switch monitor" msgid "Switch monitor"
msgstr "غيّر الشاشة" msgstr "غيّر الشاشة"
#: src/backends/meta-input-settings.c:1890 #: ../src/backends/meta-input-settings.c:2192
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "" msgstr "اعرض المساعدة على الشاشة"
#: src/backends/meta-monitor-manager.c:879 #: ../src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "شاشة مدمجة" msgstr "شاشة مدمجة"
#: src/backends/meta-monitor-manager.c:902 #: ../src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "غير معروفة" msgstr "غير معروفة"
#: src/backends/meta-monitor-manager.c:904 #: ../src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "شاشة غير معروفة" msgstr "شاشة غير معروفة"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:912 #: ../src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: ../src/compositor/compositor.c:476
#, fuzzy, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
msgstr "يعمل مدير مزج آخر على الشاشة %i والعرض \"%s\"." msgstr "يعمل مدير مزج آخر على الشاشة %i و العرض ”%s“."
#: src/core/bell.c:194 #: ../src/core/bell.c:194
msgid "Bell event" msgid "Bell event"
msgstr "حدث جرس" msgstr "حدث جرس"
#: src/core/display.c:608 #: ../src/core/display.c:608
#, fuzzy, c-format #, c-format
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "فشل فتح عرض نظام نوافذ إكس '%s'\n" msgstr "فشل فتح عرض نظام نوافذ إكس %s\n"
#: src/core/main.c:189 #: ../src/core/main.c:189
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "عطّل الاتصال بمدير الجلسة" msgstr "عطّل الاتصال بمدير الجلسة"
#: src/core/main.c:195 #: ../src/core/main.c:195
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "استبدل بمدير النوافذ الذي يعمل" msgstr "استبدل بمدير النوافذ الذي يعمل"
#: src/core/main.c:201 #: ../src/core/main.c:201
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "حدّد رقم هويّة إدارة الجلسة" msgstr "حدّد رقم هويّة إدارة الجلسة"
#: src/core/main.c:206 #: ../src/core/main.c:206
msgid "X Display to use" msgid "X Display to use"
msgstr "معراض س الذي سيستعمل" msgstr "معراض س الذي سيستعمل"
#: src/core/main.c:212 #: ../src/core/main.c:212
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "ابدأ الجلسة من ملف محفوظ" msgstr "ابدأ الجلسة من ملف محفوظ"
#: src/core/main.c:218 #: ../src/core/main.c:218
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "اجعل نداءات س متزامنة" msgstr "اجعل نداءات س متزامنة"
#: src/core/main.c:225 #: ../src/core/main.c:225
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "" msgstr ""
#: src/core/main.c:231 #: ../src/core/main.c:231
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "" msgstr ""
#: src/core/main.c:239 #: ../src/core/main.c:239
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "" msgstr ""
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: ../src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
msgid "“%s” is not responding." msgid "“%s” is not responding."
msgstr "”‏%s“ لا يستجيب." msgstr "”‏%s“ لا يستجيب."
#: src/core/meta-close-dialog-default.c:149 #: ../src/core/meta-close-dialog-default.c:149
msgid "Application is not responding." msgid "Application is not responding."
msgstr "لا يستجيب التطبيق" msgstr "لا يستجيب التطبيق"
#: src/core/meta-close-dialog-default.c:154 #: ../src/core/meta-close-dialog-default.c:154
msgid "" msgid ""
"You may choose to wait a short while for it to continue or force the " "You may choose to wait a short while for it to continue or force the "
"application to quit entirely." "application to quit entirely."
msgstr "ربما ترغب في الانتظار قليلا ليُكمِل أو إجبار التطبيق على الإنهاء كُلّية." msgstr "ربما ترغب في الانتظار قليلا ليُكمِل أو إجبار التطبيق على الإنهاء كُلّية."
#: src/core/meta-close-dialog-default.c:161 #: ../src/core/meta-close-dialog-default.c:161
msgid "_Force Quit" msgid "_Force Quit"
msgstr "أ_جبر الإنهاء" msgstr "أ_جبر الإنهاء"
#: src/core/meta-close-dialog-default.c:161 #: ../src/core/meta-close-dialog-default.c:161
msgid "_Wait" msgid "_Wait"
msgstr "ا_نتظر" msgstr "ا_نتظر"
#: src/core/mutter.c:39 #: ../src/core/mutter.c:39
#, fuzzy, c-format #, c-format
msgid "" msgid ""
"mutter %s\n" "mutter %s\n"
"Copyright © 2001-%d Havoc Pennington, Red Hat, Inc., and others\n" "Copyright © 2001-%d Havoc Pennington, Red Hat, Inc., and others\n"
@@ -592,56 +154,289 @@ msgstr ""
"هذا برنامج حر، راجع المصدر لشروط النسخ.\n" "هذا برنامج حر، راجع المصدر لشروط النسخ.\n"
"لا يوجد أي ضمان: و لا حتى ضمان قابلية التسويق أو المناسبة لأي هدف.\n" "لا يوجد أي ضمان: و لا حتى ضمان قابلية التسويق أو المناسبة لأي هدف.\n"
#: src/core/mutter.c:53 #: ../src/core/mutter.c:53
msgid "Print version" msgid "Print version"
msgstr "اطبع الإصدارة" msgstr "اطبع الإصدارة"
#: src/core/mutter.c:59 #: ../src/core/mutter.c:59
msgid "Mutter plugin to use" msgid "Mutter plugin to use"
msgstr "ملحق مَتَر الذي سيُستخدم" msgstr "ملحق مَتَر الذي سيُستخدم"
#: src/core/prefs.c:1997 #: ../src/core/prefs.c:1997
#, c-format #, c-format
msgid "Workspace %d" msgid "Workspace %d"
msgstr "مساحة العمل %d" msgstr "مساحة العمل %d"
#: src/core/screen.c:580 #: ../src/core/screen.c:583
#, fuzzy, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
"replace the current window manager." "replace the current window manager."
msgstr "" msgstr ""
"الشاشة \"%s\" لها مدير نوافذ بالفعل، حاول استعمال خيار التبديل --replace " "الشاشة ”%s“ لها مدير نوافذ بالفعل، حاول استعمال خيار التبديل --replace لتحُلّ"
"لتحُلّ محلّ مدير النوافذ الحالي." " محلّ مدير النوافذ الحالي."
#: src/core/screen.c:665 #: ../src/core/screen.c:668
#, fuzzy, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "الشاشة %d على العرض '%s' غير صحيحة\n" msgstr "الشاشة %d على العرض %s غير صحيحة\n"
#: src/core/util.c:120 #: ../src/core/util.c:120
msgid "Mutter was compiled without support for verbose mode\n" msgid "Mutter was compiled without support for verbose mode\n"
msgstr "جُمِّع مَتَر دون دعم للنمط المطنب\n" msgstr "جُمِّع مَتَر دون دعم للنمط المطنب\n"
#: src/wayland/meta-wayland-tablet-pad.c:563 #: ../src/wayland/meta-wayland-tablet-pad.c:563
#, c-format #, c-format
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "" msgstr ""
#: src/x11/session.c:1815 #: ../src/x11/session.c:1815
#, fuzzy
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
msgstr "" msgstr ""
"هذه النوافذ لا تدعم &quot;احفظ الضبط الحالي&quot; يجب إعادة تشغيلها يدويا " "هذه النوافذ لا تدعم الضبط الحالي&quot; إعادة تشغيلها يدويا عند الولوج "
"عند الولوج المرة القادمة." "المرة القادمة."
#: src/x11/window-props.c:559 #: ../src/x11/window-props.c:559
#, c-format #, c-format
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (على %s)" msgstr "%s (على %s)"
#~ msgid "Navigation"
#~ msgstr "الإبحار"
#~ msgid "Move window to workspace 1"
#~ msgstr "انقل النافذة إلى مساحة العمل 1"
#~ msgid "Move window to workspace 2"
#~ msgstr "انقل النافذة إلى مساحة العمل 2"
#~ msgid "Move window to workspace 3"
#~ msgstr "انقل النافذة إلى مساحة العمل 3"
#~ msgid "Move window to workspace 4"
#~ msgstr "انقل النافذة إلى مساحة العمل 4"
#~ msgid "Move window to last workspace"
#~ msgstr "انقل النافذة إلى مساحة العمل الأخيرة"
#~ msgid "Move window one workspace to the left"
#~ msgstr "انقل النافذة مساحة عمل واحدة إلى اليسار"
#~ msgid "Move window one workspace to the right"
#~ msgstr "انقل النافذة مساحة عمل واحدة إلى اليمين"
#~ msgid "Move window one workspace up"
#~ msgstr "انقل النافذة مساحة عمل واحدة إلى الأعلى"
#~ msgid "Move window one workspace down"
#~ msgstr "انقل النافذة مساحة عمل واحدة إلى الأسفل"
#~ msgid "Move window one monitor to the left"
#~ msgstr "انقل النافذة شاشة واحدة إلى اليسار"
#~ msgid "Move window one monitor to the right"
#~ msgstr "انقل النافذة شاشة واحدة إلى اليمين"
#~ msgid "Move window one monitor up"
#~ msgstr "انقل النافذة شاشة واحدة إلى الأعلى"
#~ msgid "Move window one monitor down"
#~ msgstr "انقل النافذة شاشة واحدة إلى الأسفل"
#~ msgid "Switch applications"
#~ msgstr "تنقل بين التطبيقات"
#~ msgid "Switch to previous application"
#~ msgstr "انتقل إلى التطبيق السابق"
#~ msgid "Switch windows"
#~ msgstr "تنقل بين النوافذ"
#~ msgid "Switch to previous window"
#~ msgstr "انتقل إلى النافذة السابقة"
#~ msgid "Switch windows of an application"
#~ msgstr "تنقل بين نوافذ التطبيق"
#~ msgid "Switch to previous window of an application"
#~ msgstr "انتقل إلى نافذة التطبيق السابقة"
#~ msgid "Switch system controls"
#~ msgstr "تنقل بين تحكمات النظام"
#~ msgid "Switch to previous system control"
#~ msgstr "انتقل إلى تحكم النظام السابق"
#~ msgid "Switch windows directly"
#~ msgstr "تنقل مباشرة بين النوافذ"
#~ msgid "Switch directly to previous window"
#~ msgstr "انتقل مباشرة إلى النافذة السابقة"
#~ msgid "Switch windows of an app directly"
#~ msgstr "تنقل مباشرة بين نوافذ التطبيق"
#~ msgid "Switch directly to previous window of an app"
#~ msgstr "انتقل مباشرة إلى نافذة التطبيق السابقة"
#~ msgid "Switch system controls directly"
#~ msgstr "تنقل مباشرة بين تحكمات النظام"
#~ msgid "Switch directly to previous system control"
#~ msgstr "انتقل مباشرة إلى تحكم النظام السابق"
#~ msgid "Hide all normal windows"
#~ msgstr "أخفِ كل النوافذ العادية"
#~ msgid "Switch to workspace 1"
#~ msgstr "انتقل إلى مساحة العمل 1"
#~ msgid "Switch to workspace 2"
#~ msgstr "انتقل إلى مساحة العمل 2"
#~ msgid "Switch to workspace 3"
#~ msgstr "انتقل إلى مساحة العمل 3"
#~ msgid "Switch to workspace 4"
#~ msgstr "انتقل إلى مساحة العمل 4"
#~ msgid "Switch to last workspace"
#~ msgstr "انتقل إلى مساحة العمل الأخيرة"
#~ msgid "Move to workspace left"
#~ msgstr "انقل لمساحة العمل على اليسار"
#~ msgid "Move to workspace right"
#~ msgstr "انقل لمساحة العمل على اليمين"
#~ msgid "Move to workspace above"
#~ msgstr "انقل لمساحة العمل أعلى"
#~ msgid "Move to workspace below"
#~ msgstr "انقل لمساحة العمل أسفل"
#~ msgid "System"
#~ msgstr "النظام"
#~ msgid "Show the run command prompt"
#~ msgstr "أظهر محث تشغيل أمر"
#~ msgid "Show the activities overview"
#~ msgstr "أظهر نظرة عامة على الأنشطة"
#~ msgid "Windows"
#~ msgstr "النوافذ"
#~ msgid "Activate the window menu"
#~ msgstr "فعّل قائمة النافذة"
#~ msgid "Toggle fullscreen mode"
#~ msgstr "بدّل نمط ملء الشاشة"
#~ msgid "Toggle maximization state"
#~ msgstr "بدّل حالة التكبير"
#~ msgid "Maximize window"
#~ msgstr "كبّر النّافذة"
#~ msgid "Restore window"
#~ msgstr "استعد النّافذة"
#~ msgid "Toggle shaded state"
#~ msgstr "بدّل حالة الإخفاء"
#~ msgid "Close window"
#~ msgstr "أغلق النّافذة"
#~ msgid "Hide window"
#~ msgstr "أخفِ النّافذة"
#~ msgid "Move window"
#~ msgstr "انقل النّافذة"
#~ msgid "Resize window"
#~ msgstr "حجّم النّافذة"
#~ msgid "Toggle window on all workspaces or one"
#~ msgstr "بدّل حالة ظهور النافذة على جميع مساحات العمل أو واحدة منها"
#~ msgid "Raise window if covered, otherwise lower it"
#~ msgstr "ارفع النافذة إذا كانت أخرى تغطيها، أو أخفضها في ما عدا ذلك"
#~ msgid "Raise window above other windows"
#~ msgstr "ارفع النافذة فوق النوافذ الأخرى"
#~ msgid "Lower window below other windows"
#~ msgstr "اخفض النافذة تحت النوافذ الأخرى"
#~ msgid "Maximize window vertically"
#~ msgstr "كبّر النافذة رأسيا"
#~ msgid "Maximize window horizontally"
#~ msgstr "كبّر النافذة أفقيا"
#~ msgid "View split on left"
#~ msgstr "المنظور مقسوم على اليمين"
#~ msgid "View split on right"
#~ msgstr "المنظور مقسوم على اليسار"
#~ msgid "Mutter"
#~ msgstr "مَتَر"
#~ msgid "Modifier to use for extended window management operations"
#~ msgstr "المغير الذي سيُستعمل لتمديد عمليات إدارة النوافذ "
#, fuzzy
#~ msgid "Switch to VT 1"
#~ msgstr "انتقل إلى مساحة العمل 1"
#, fuzzy
#~ msgid "Switch to VT 2"
#~ msgstr "انتقل إلى مساحة العمل 2"
#, fuzzy
#~ msgid "Switch to VT 3"
#~ msgstr "انتقل إلى مساحة العمل 3"
#, fuzzy
#~ msgid "Switch to VT 4"
#~ msgstr "انتقل إلى مساحة العمل 4"
#, fuzzy
#~ msgid "Switch to VT 5"
#~ msgstr "انتقل إلى مساحة العمل 5"
#, fuzzy
#~ msgid "Switch to VT 6"
#~ msgstr "انتقل إلى مساحة العمل 6"
#, fuzzy
#~ msgid "Switch to VT 7"
#~ msgstr "انتقل إلى مساحة العمل 7"
#, fuzzy
#~ msgid "Switch to VT 8"
#~ msgstr "انتقل إلى مساحة العمل 8"
#, fuzzy
#~ msgid "Switch to VT 9"
#~ msgstr "انتقل إلى مساحة العمل 9"
#, fuzzy
#~ msgid "Switch to VT 10"
#~ msgstr "انتقل إلى مساحة العمل 10"
#, fuzzy
#~ msgid "Switch to VT 11"
#~ msgstr "انتقل إلى مساحة العمل 11"
#, fuzzy
#~ msgid "Switch to VT 12"
#~ msgstr "انتقل إلى مساحة العمل 12"
#~ msgid "Unknown window information request: %d" #~ msgid "Unknown window information request: %d"
#~ msgstr "طلب معلومات نافذة مجهول: %d" #~ msgstr "طلب معلومات نافذة مجهول: %d"

208
po/ca.po
View File

@@ -11,10 +11,9 @@
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: metacity 2.24\n" "Project-Id-Version: metacity 2.24\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-06-07 13:00+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-06-17 10:25+0200\n"
"PO-Revision-Date: 2017-08-25 13:23+0200\n"
"Last-Translator: Jordi Mas <jmas@softcatala.org>\n" "Last-Translator: Jordi Mas <jmas@softcatala.org>\n"
"Language-Team: Catalan <tradgnome@softcatala.org>\n" "Language-Team: Catalan <tradgnome@softcatala.org>\n"
"Language: ca\n" "Language: ca\n"
@@ -22,7 +21,7 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n" "Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n" "Plural-Forms: nplurals=2; plural=n != 1;\n"
"X-Generator: Poedit 2.0.1\n" "X-Generator: Poedit 2.0.6\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
@@ -49,134 +48,118 @@ msgid "Move window to last workspace"
msgstr "Mou la finestra a l'últim espai de treball" msgstr "Mou la finestra a l'últim espai de treball"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Mou la finestra un espai de treball a l'esquerra"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Mou la finestra un espai de treball a la dreta"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Mou la finestra un espai de treball amunt" msgstr "Mou la finestra un espai de treball amunt"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Mou la finestra un espai de treball avall" msgstr "Mou la finestra un espai de treball avall"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Mou la finestra un monitor a l'esquerra" msgstr "Mou la finestra un monitor a l'esquerra"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Mou la finestra un monitor a la dreta" msgstr "Mou la finestra un monitor a la dreta"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Mou la finestra un monitor amunt" msgstr "Mou la finestra un monitor amunt"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Mou la finestra un monitor avall" msgstr "Mou la finestra un monitor avall"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Canvia d'aplicacions" msgstr "Canvia d'aplicacions"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Canvia a l'aplicació anterior" msgstr "Canvia a l'aplicació anterior"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Canvia de finestres" msgstr "Canvia de finestres"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Canvia a la finestra anterior" msgstr "Canvia a la finestra anterior"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Canvia entre les finestres d'una aplicació" msgstr "Canvia entre les finestres d'una aplicació"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Canvia a la finestra anterior d'una aplicació" msgstr "Canvia a la finestra anterior d'una aplicació"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Canvia els controls del sistema" msgstr "Canvia els controls del sistema"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Canvia al control del sistema anterior" msgstr "Canvia al control del sistema anterior"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Canvia immediatament entre finestres" msgstr "Canvia immediatament entre finestres"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Canvia immediatament a la finestra anterior" msgstr "Canvia immediatament a la finestra anterior"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Canvia immediatament entre les finestres d'una aplicació" msgstr "Canvia immediatament entre les finestres d'una aplicació"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Canvia immediatament a la finestra anterior d'una aplicació" msgstr "Canvia immediatament a la finestra anterior d'una aplicació"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Canvia immediatament entre els controls del sistema" msgstr "Canvia immediatament entre els controls del sistema"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Canvia immediatament al control del sistema anterior" msgstr "Canvia immediatament al control del sistema anterior"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Oculta totes les finestres normals" msgstr "Oculta totes les finestres normals"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Canvia a l'espai de treball 1" msgstr "Canvia a l'espai de treball 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Canvia a l'espai de treball 2" msgstr "Canvia a l'espai de treball 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Canvia a l'espai de treball 3" msgstr "Canvia a l'espai de treball 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Canvia a l'espai de treball 4" msgstr "Canvia a l'espai de treball 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Canvia a l'últim espai de treball" msgstr "Canvia a l'últim espai de treball"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Mou a l'espai de treball de l'esquerra"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Mou a l'espai de treball de la dreta"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Mou a l'espai de treball de sobre" msgstr "Mou a l'espai de treball de sobre"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Mou a l'espai de treball de sota" msgstr "Mou a l'espai de treball de sota"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sistema" msgstr "Sistema"
@@ -188,6 +171,10 @@ msgstr "Mostra l'indicador d'execució d'aplicacions"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Mostra la vista general d'activitats" msgstr "Mostra la vista general d'activitats"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Restaura les dreceres de teclat"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Finestres" msgstr "Finestres"
@@ -213,56 +200,52 @@ msgid "Restore window"
msgstr "Restaura la finestra" msgstr "Restaura la finestra"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Canvia l'estat d'ombrejat"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Tanca la finestra" msgstr "Tanca la finestra"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Oculta la finestra" msgstr "Oculta la finestra"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Mou la finestra" msgstr "Mou la finestra"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Redimensiona la finestra" msgstr "Redimensiona la finestra"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "" msgstr ""
"Canvia la funció que fa que la finestra estigui en tots els espais de " "Canvia la funció que fa que la finestra estigui en tots els espais de "
"treball o només en un" "treball o només en un"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Alça la finestra si està coberta per una altra; altrament, baixa-la" msgstr "Alça la finestra si està coberta per una altra; altrament, baixa-la"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Alça la finestra per damunt de les altres" msgstr "Alça la finestra per damunt de les altres"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Baixa la finestra sota les altres" msgstr "Baixa la finestra sota les altres"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Maximitza la finestra verticalment" msgstr "Maximitza la finestra verticalment"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Maximitza la finestra horitzontalment" msgstr "Maximitza la finestra horitzontalment"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Mostra la partició a l'esquerra" msgstr "Mostra la partició a l'esquerra"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Mostra la partició a la dreta" msgstr "Mostra la partició a la dreta"
@@ -424,25 +407,22 @@ msgid ""
"proof. Currently possible keywords: • “scale-monitor-framebuffer” — makes " "proof. Currently possible keywords: • “scale-monitor-framebuffer” — makes "
"mutter default to layout logical monitors in a logical pixel coordinate " "mutter default to layout logical monitors in a logical pixel coordinate "
"space, while scaling monitor framebuffers instead of window content, to " "space, while scaling monitor framebuffers instead of window content, to "
"manage HiDPI monitors. Does not require a restart. • “remote-desktop” — " "manage HiDPI monitors. Does not require a restart."
"enables remote desktop support. To support remote desktop with screen "
"sharing, “screen-cast” must also be enabled. • “screen-cast” — enables "
"screen cast support."
msgstr "" msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:145 #: data/org.gnome.mutter.gschema.xml.in:141
msgid "Select window from tab popup" msgid "Select window from tab popup"
msgstr "Selecció de finestra entre les emergents d'una pestanya" msgstr "Selecció de finestra entre les emergents d'una pestanya"
#: data/org.gnome.mutter.gschema.xml.in:150 #: data/org.gnome.mutter.gschema.xml.in:146
msgid "Cancel tab popup" msgid "Cancel tab popup"
msgstr "Cancel·lació de les finestres emergents a les pestanyes" msgstr "Cancel·lació de les finestres emergents a les pestanyes"
#: data/org.gnome.mutter.gschema.xml.in:155 #: data/org.gnome.mutter.gschema.xml.in:151
msgid "Switch monitor configurations" msgid "Switch monitor configurations"
msgstr "Canvia configuracions de monitor" msgstr "Canvia configuracions de monitor"
#: data/org.gnome.mutter.gschema.xml.in:160 #: data/org.gnome.mutter.gschema.xml.in:156
msgid "Rotates the built-in monitor configuration" msgid "Rotates the built-in monitor configuration"
msgstr "Gira la configuració del monitor integrada" msgstr "Gira la configuració del monitor integrada"
@@ -498,10 +478,41 @@ msgstr "Canvia al terminal virtual 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Torna a habilitar les dreceres" msgstr "Torna a habilitar les dreceres"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Permetre la captura amb Xwayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Les aplicacions Xwayland poden capturar el teclat"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2325
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Mode de commutació (grup %d)" msgstr "Mode de commutació (grup %d)"
@@ -509,11 +520,11 @@ msgstr "Mode de commutació (grup %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2348
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Commuta el monitor" msgstr "Commuta el monitor"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2350
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Mostra l'ajuda en pantalla" msgstr "Mostra l'ajuda en pantalla"
@@ -539,7 +550,7 @@ msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -557,31 +568,31 @@ msgid "Failed to open X Window System display “%s”\n"
msgstr "" msgstr ""
"S'ha produït un error en obrir la pantalla del sistema de finestres X «%s»\n" "S'ha produït un error en obrir la pantalla del sistema de finestres X «%s»\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Inhabilita la connexió al gestor de sessions" msgstr "Inhabilita la connexió al gestor de sessions"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Reemplaça el gestor de finestres en execució" msgstr "Reemplaça el gestor de finestres en execució"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Especifica l'ID de gestió de sessió" msgstr "Especifica l'ID de gestió de sessió"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Visualització X per usar" msgstr "Visualització X per usar"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Inicialitza la sessió des del fitxer desat" msgstr "Inicialitza la sessió des del fitxer desat"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Fes que les crides a l'X siguin síncrones" msgstr "Fes que les crides a l'X siguin síncrones"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Funciona com a compositor de Wayland" msgstr "Funciona com a compositor de Wayland"
@@ -590,14 +601,18 @@ msgstr "Funciona com a compositor de Wayland"
# #
# Camins: # Camins:
# ../src/core/main.c:223 # ../src/core/main.c:223
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Funciona com a compositor imbricat" msgstr "Funciona com a compositor imbricat"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Funciona com a servidor de pantalla completa, en comptes d'imbricat" msgstr "Funciona com a servidor de pantalla completa, en comptes d'imbricat"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Executa amb un rerefons X11"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -653,7 +668,7 @@ msgstr "Connector del Mutter a utilitzar"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Espai de treball %d" msgstr "Espai de treball %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -662,7 +677,7 @@ msgstr ""
"La pantalla «%s» ja té un gestor de finestres; proveu l'opció --replace per " "La pantalla «%s» ja té un gestor de finestres; proveu l'opció --replace per "
"reemplaçar el gestor de finestres actual." "reemplaçar el gestor de finestres actual."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "El monitor %d en la pantalla '%s' no és vàlida\n" msgstr "El monitor %d en la pantalla '%s' no és vàlida\n"
@@ -671,12 +686,12 @@ msgstr "El monitor %d en la pantalla '%s' no és vàlida\n"
msgid "Mutter was compiled without support for verbose mode\n" msgid "Mutter was compiled without support for verbose mode\n"
msgstr "Mutter es va compilar sense compatibilitat per al mode detallat\n" msgstr "Mutter es va compilar sense compatibilitat per al mode detallat\n"
#: src/wayland/meta-wayland-tablet-pad.c:563 #: src/wayland/meta-wayland-tablet-pad.c:567
#, c-format #, c-format
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Mode de commutació: mode %d" msgstr "Mode de commutació: mode %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -689,6 +704,21 @@ msgstr ""
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (a %s)" msgstr "%s (a %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Mou la finestra un espai de treball a l'esquerra"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Mou la finestra un espai de treball a la dreta"
#~ msgid "Move to workspace left"
#~ msgstr "Mou a l'espai de treball de l'esquerra"
#~ msgid "Move to workspace right"
#~ msgstr "Mou a l'espai de treball de la dreta"
#~ msgid "Toggle shaded state"
#~ msgstr "Canvia l'estat d'ombrejat"
#~ msgid "Failed to scan themes directory: %s\n" #~ msgid "Failed to scan themes directory: %s\n"
#~ msgstr "No s'ha pogut analitzar el directori de temes: %s\n" #~ msgstr "No s'ha pogut analitzar el directori de temes: %s\n"

File diff suppressed because it is too large Load Diff

221
po/cs.po
View File

@@ -6,17 +6,16 @@
# Petr Tomeš <ptomes@gmail.com>, 2006. # Petr Tomeš <ptomes@gmail.com>, 2006.
# Jakub Friedl <jfriedl@suse.cz>, 2006, 2007. # Jakub Friedl <jfriedl@suse.cz>, 2006, 2007.
# Petr Kovar <pknbe@volny.cz>, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014. # Petr Kovar <pknbe@volny.cz>, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.
# Marek Černocký <marek@manet.cz>, 2012, 2013, 2014, 2016, 2017. # Marek Černocký <marek@manet.cz>, 2012, 2013, 2014, 2016, 2017, 2018.
# #
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter\n" "Project-Id-Version: mutter\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-03-01 10:47+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-03-07 19:28+0100\n"
"PO-Revision-Date: 2017-08-31 00:11+0200\n"
"Last-Translator: Marek Černocký <marek@manet.cz>\n" "Last-Translator: Marek Černocký <marek@manet.cz>\n"
"Language-Team: čeština <gnome-cs-list@gnome.org>>\n" "Language-Team: čeština <gnome-cs-list@gnome.org>\n"
"Language: cs\n" "Language: cs\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
@@ -50,134 +49,118 @@ msgid "Move window to last workspace"
msgstr "Přesunout okno na poslední pracovní plochu" msgstr "Přesunout okno na poslední pracovní plochu"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Přesunout okno o jednu pracovní plochu doleva"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Přesunout okno o jednu pracovní plochu doprava"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Přesunout okno o jednu pracovní plochu nahoru" msgstr "Přesunout okno o jednu pracovní plochu nahoru"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Přesunout okno o jednu pracovní plochu dolů" msgstr "Přesunout okno o jednu pracovní plochu dolů"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Přesunout okno o jeden monitor doleva" msgstr "Přesunout okno o jeden monitor doleva"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Přesunout okno o jeden monitor doprava" msgstr "Přesunout okno o jeden monitor doprava"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Přesunout okno o jeden monitor nahoru" msgstr "Přesunout okno o jeden monitor nahoru"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Přesunout okno o jeden monitor dolů" msgstr "Přesunout okno o jeden monitor dolů"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Přepnout do jiné aplikace" msgstr "Přepnout do jiné aplikace"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Přepnout do předchozí aplikaci" msgstr "Přepnout do předchozí aplikaci"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Přepnout do jiného okna" msgstr "Přepnout do jiného okna"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Přepnout do minulého okna" msgstr "Přepnout do minulého okna"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Přepnout do jiného okna aplikace" msgstr "Přepnout do jiného okna aplikace"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Přepnout do předchozího okna aplikace" msgstr "Přepnout do předchozího okna aplikace"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Přepnout na systémový ovládací prvek" msgstr "Přepnout na systémový ovládací prvek"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Přepnout na minulý systémový ovládací prvek" msgstr "Přepnout na minulý systémový ovládací prvek"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Přepnout do minulého okna" msgstr "Přepnout do minulého okna"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Přepnout přímo na předchozí okno" msgstr "Přepnout přímo na předchozí okno"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Přepnout do jiného okna aplikace" msgstr "Přepnout do jiného okna aplikace"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Přepnout do předchozího okna aplikace" msgstr "Přepnout do předchozího okna aplikace"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Přepnout na minulý systémový ovládací prvek" msgstr "Přepnout na minulý systémový ovládací prvek"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Přepnout přímo na předchozí systémové ovládací prvky" msgstr "Přepnout přímo na předchozí systémové ovládací prvky"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Skrýt všechna běžná okna" msgstr "Skrýt všechna běžná okna"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Přepnout na plochu 1" msgstr "Přepnout na plochu 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Přepnout na plochu 2" msgstr "Přepnout na plochu 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Přepnout na plochu 3" msgstr "Přepnout na plochu 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Přepnout na plochu 4" msgstr "Přepnout na plochu 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Přepnout na poslední plochu" msgstr "Přepnout na poslední plochu"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Přesunout na plochu vlevo"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Přesunout na plochu vpravo"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Přesunout na plochu nad" msgstr "Přesunout na plochu nad"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Přesunout na plochu pod" msgstr "Přesunout na plochu pod"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Systém" msgstr "Systém"
@@ -189,6 +172,10 @@ msgstr "Zobrazit řádek ke spuštění příkazu"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Zobrazit přehled činností" msgstr "Zobrazit přehled činností"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Obnovit klávesové zkratky"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Okna" msgstr "Okna"
@@ -214,54 +201,50 @@ msgid "Restore window"
msgstr "Obnovit velikost okna" msgstr "Obnovit velikost okna"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Přepnout stav svinutí"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Zavřít okno" msgstr "Zavřít okno"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Skrýt okno" msgstr "Skrýt okno"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Přesunout okno" msgstr "Přesunout okno"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Změnit velikost okna" msgstr "Změnit velikost okna"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Přepnout okno na všechny/jednu pracovní plochu" msgstr "Přepnout okno na všechny/jednu pracovní plochu"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Když je okno zakryté vynést jej do popředí, jinak odsunout do pozadí" msgstr "Když je okno zakryté vynést jej do popředí, jinak odsunout do pozadí"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Vynést okno do popředí nad ostatní okna" msgstr "Vynést okno do popředí nad ostatní okna"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Odsunout okno do pozadí za ostatní okna" msgstr "Odsunout okno do pozadí za ostatní okna"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Maximalizovat okno svisle" msgstr "Maximalizovat okno svisle"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Maximalizovat okno vodorovně" msgstr "Maximalizovat okno vodorovně"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Rozdělit okno přes levou půlku obrazovky" msgstr "Rozdělit okno přes levou půlku obrazovky"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Rozdělit okno přes pravou půlku obrazovky" msgstr "Rozdělit okno přes pravou půlku obrazovky"
@@ -499,10 +482,57 @@ msgstr "Přepnout na VT 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Znovu povolit klávesové zkratky" msgstr "Znovu povolit klávesové zkratky"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Povolit zachytávání pomocí Xwaylandu"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Povolit, aby bylo bráno v úvahu zachytávání kláves, o které se stará "
"aplikace X11 běžící v Xwaylandu. Aby bylo pod Waylandem zachytávání bráno v "
"úvahu, musí klient navíc buď poslat specifickou zprávu X11 ClientMessage do "
"kořenového okna, nebo být mezi aplikacemi na bílé listině v klíči „xwayland-"
"grab-access-rules“."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr ""
"Aplikace pod Xwaylandem mají povoleno se starat o zachytávání klávesnice"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Seznam názvů prostředků nebo tříd prostředků oken X11, které buď mají nebo "
"nemají povolené se starat o zachytávání klávesnice X11 pod Xwaylandem. Název "
"nebo třída prostředku daného okna X11 se dá zjistit pomocí příkazu „xprop "
"WM_CLASS“. V názvech jsou podporované divoké znaky „*“ a „?“. Hodnoty "
"začínající „!“ jsou na černé listině, což má přednost před bílou listinou, "
"aby se daly aplikace odvolat z výchozího systémového seznamu. Do výchozího "
"systémového seznamu patří následující aplikace: "
"„@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@“. Uživatel může přerušit existující "
"zachytávání pomocí speciální klávesové zkratky definované klíčem „restore-"
"shortcuts“."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2325
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Přepínač režimu (skupina %d)" msgstr "Přepínač režimu (skupina %d)"
@@ -510,37 +540,37 @@ msgstr "Přepínač režimu (skupina %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2348
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Přepnout monitor" msgstr "Přepnout monitor"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2350
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Zobrazit nápovědu na obrazovce" msgstr "Zobrazit nápovědu na obrazovce"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Vestavěný displej" msgstr "Vestavěný displej"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Neznámý" msgstr "Neznámý"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Neznámý displej" msgstr "Neznámý displej"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -555,42 +585,46 @@ msgstr "Událost zvonku"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Nelze otevřít displej X Window System „%s“\n" msgstr "Nelze otevřít displej X Window System „%s“\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Zakáže připojení ke správci sezení" msgstr "Zakáže připojení ke správci sezení"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Nahradí běžícího správce oken" msgstr "Nahradí běžícího správce oken"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Určení ID správy sezení" msgstr "Určení ID správy sezení"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Displej X, který použije" msgstr "Displej X, který použije"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Spustí sezení z uloženého souboru" msgstr "Spustí sezení z uloženého souboru"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Provede volání X synchronně" msgstr "Provede volání X synchronně"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Spustit jako kompozitor protokolu Wayland" msgstr "Spustit jako kompozitor protokolu Wayland"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Spustit jako podkladový kompozitor" msgstr "Spustit jako podkladový kompozitor"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Spustit jako plnohodnotný server displeje, nikoliv vnořeně" msgstr "Spustit jako plnohodnotný server displeje, nikoliv vnořeně"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Spustit se serverem X11"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -646,7 +680,7 @@ msgstr "Zásuvný modul Mutter, který se má použít"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Plocha %d" msgstr "Plocha %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -655,7 +689,7 @@ msgstr ""
"Displej „%s“ již správce oken má; zkuste prosím nahradit aktuálního správce " "Displej „%s“ již správce oken má; zkuste prosím nahradit aktuálního správce "
"oken pomocí přepínače --replace." "oken pomocí přepínače --replace."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Obrazovka %d na displeji „%s“ je neplatná\n" msgstr "Obrazovka %d na displeji „%s“ je neplatná\n"
@@ -664,12 +698,12 @@ msgstr "Obrazovka %d na displeji „%s“ je neplatná\n"
msgid "Mutter was compiled without support for verbose mode\n" msgid "Mutter was compiled without support for verbose mode\n"
msgstr "Mutter bylo přeloženo bez podpory podrobného režimu\n" msgstr "Mutter bylo přeloženo bez podpory podrobného režimu\n"
#: src/wayland/meta-wayland-tablet-pad.c:563 #: src/wayland/meta-wayland-tablet-pad.c:567
#, c-format #, c-format
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Přepínač režimu: režim %d" msgstr "Přepínač režimu: režim %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -681,3 +715,18 @@ msgstr ""
#, c-format #, c-format
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (na %s)" msgstr "%s (na %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Přesunout okno o jednu pracovní plochu doleva"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Přesunout okno o jednu pracovní plochu doprava"
#~ msgid "Move to workspace left"
#~ msgstr "Přesunout na plochu vlevo"
#~ msgid "Move to workspace right"
#~ msgstr "Přesunout na plochu vpravo"
#~ msgid "Toggle shaded state"
#~ msgstr "Přepnout stav svinutí"

216
po/da.po
View File

@@ -1,5 +1,5 @@
# Danish translation of Mutter. # Danish translation of Mutter.
# Copyright (C) 2002-2009, 2012-2017. # Copyright (C) 2002-2009, 2012-2018.
# This file is distributed under the same license as the metacity package. # This file is distributed under the same license as the metacity package.
# Kjartan Maraas <kmaraas@gnome.org>, 2002 # Kjartan Maraas <kmaraas@gnome.org>, 2002
# Keld simonsen <keld@dkuug.dk>, 2002 # Keld simonsen <keld@dkuug.dk>, 2002
@@ -8,7 +8,7 @@
# Lasse Bang Mikkelsen <lbm@fatalerror.dk>, 2006. # Lasse Bang Mikkelsen <lbm@fatalerror.dk>, 2006.
# Kenneth Nielsen <k.nielsen81@gmail.com>, 2008. # Kenneth Nielsen <k.nielsen81@gmail.com>, 2008.
# Joe Hansen <joedalton2@yahoo.dk>, 2011. # Joe Hansen <joedalton2@yahoo.dk>, 2011.
# Ask Hjorth Larsen <asklarsen@gmail.com>, 2007, 09, 10, 12, 13, 14, 15, 16, 17. # Ask Hjorth Larsen <asklarsen@gmail.com>, 2007, 09, 10, 12, 13, 14, 15, 16, 17, 18.
# #
# Ordliste: # Ordliste:
# #
@@ -19,10 +19,9 @@
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter\n" "Project-Id-Version: mutter\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-06 04:14+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-03-07 22:29+0100\n"
"PO-Revision-Date: 2017-09-03 20:29+0200\n"
"Last-Translator: Ask Hjorth Larsen <asklarsen@gmail.com>\n" "Last-Translator: Ask Hjorth Larsen <asklarsen@gmail.com>\n"
"Language-Team: Danish <dansk@dansk-gruppen.dk>\n" "Language-Team: Danish <dansk@dansk-gruppen.dk>\n"
"Language: da\n" "Language: da\n"
@@ -55,134 +54,118 @@ msgid "Move window to last workspace"
msgstr "Flyt vindue til sidste arbejdsområde" msgstr "Flyt vindue til sidste arbejdsområde"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Flyt vindue et arbejdsområde til venstre"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Flyt vindue et arbejdsområde til højre"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Flyt vindue et arbejdsområde op" msgstr "Flyt vindue et arbejdsområde op"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Flyt vindue et arbejdsområde ned" msgstr "Flyt vindue et arbejdsområde ned"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Flyt vindue en skærm til venstre" msgstr "Flyt vindue en skærm til venstre"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Flyt vindue en skærm til højre" msgstr "Flyt vindue en skærm til højre"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Flyt vindue en skærm op" msgstr "Flyt vindue en skærm op"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Flyt vindue en skærm ned" msgstr "Flyt vindue en skærm ned"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Skift mellem programmer" msgstr "Skift mellem programmer"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Skift til forrige program" msgstr "Skift til forrige program"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Skift mellem vinduer" msgstr "Skift mellem vinduer"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Skift til forrige vindue" msgstr "Skift til forrige vindue"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Skift mellem vinduer i et program" msgstr "Skift mellem vinduer i et program"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Skift til forrige vindue af et program" msgstr "Skift til forrige vindue af et program"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Skift mellem systemkontroller" msgstr "Skift mellem systemkontroller"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Skift til forrige systemkontrol" msgstr "Skift til forrige systemkontrol"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Skift direkte mellem vinduer" msgstr "Skift direkte mellem vinduer"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Skift direkte til forrige vindue" msgstr "Skift direkte til forrige vindue"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Skift direkte mellem vinduer i et program" msgstr "Skift direkte mellem vinduer i et program"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Skift direkte til forrige vindue af et program" msgstr "Skift direkte til forrige vindue af et program"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Skift direkte mellem systemkontroller" msgstr "Skift direkte mellem systemkontroller"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Skift direkte til forrige systemkontrol" msgstr "Skift direkte til forrige systemkontrol"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Skjul alle normale vinduer" msgstr "Skjul alle normale vinduer"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Skift til arbejdsområde 1" msgstr "Skift til arbejdsområde 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Skift til arbejdsområde 2" msgstr "Skift til arbejdsområde 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Skift til arbejdsområde 3" msgstr "Skift til arbejdsområde 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Skift til arbejdsområde 4" msgstr "Skift til arbejdsområde 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Skift til sidste arbejdsområde" msgstr "Skift til sidste arbejdsområde"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Flyt til arbejdsområdet til venstre"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Flyt til arbejdsområdet til højre"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Flyt til arbejdsområdet ovenover" msgstr "Flyt til arbejdsområdet ovenover"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Flyt til arbejdsområdet nedenunder" msgstr "Flyt til arbejdsområdet nedenunder"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "System" msgstr "System"
@@ -194,6 +177,10 @@ msgstr "Vis “kør kommando”-prompten"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Vis aktivitetsoversigten" msgstr "Vis aktivitetsoversigten"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Gendan tastaturgenvejene"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Vinduer" msgstr "Vinduer"
@@ -219,54 +206,50 @@ msgid "Restore window"
msgstr "Gendan vindue" msgstr "Gendan vindue"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Slå vinduesoprulning til/fra"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Luk vindue" msgstr "Luk vindue"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Skjul vindue" msgstr "Skjul vindue"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Flyt vindue" msgstr "Flyt vindue"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Ændr vinduesstørrelse" msgstr "Ændr vinduesstørrelse"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Slå visning af vindue på alle arbejdsområder til/fra" msgstr "Slå visning af vindue på alle arbejdsområder til/fra"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Hæv vindue hvis det er dækket, ellers sænk det" msgstr "Hæv vindue hvis det er dækket, ellers sænk det"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Hæv vindue over andre vinduer" msgstr "Hæv vindue over andre vinduer"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Sænk vindue under andre vinduer" msgstr "Sænk vindue under andre vinduer"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Maksimér vindue lodret" msgstr "Maksimér vindue lodret"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Maksimér vindue vandret" msgstr "Maksimér vindue vandret"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Delt visning venstre" msgstr "Delt visning venstre"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Delt visning højre" msgstr "Delt visning højre"
@@ -424,7 +407,18 @@ msgid ""
"enables remote desktop support. To support remote desktop with screen " "enables remote desktop support. To support remote desktop with screen "
"sharing, “screen-cast” must also be enabled. • “screen-cast” — enables " "sharing, “screen-cast” must also be enabled. • “screen-cast” — enables "
"screen cast support." "screen cast support."
msgstr "For at slå eksperimentelle funktioner til, skal du tilføje funktionsnøgleordet til listen. Om funktionen kræver genstart af kompositoren afhænger af den givne funktion. Der er ingen garanti for at eksperimentelle funktion forbliver tilgængelige eller mulige at konfigurere. Forvent ikke at noget i denne indstilling nødvendigvis fungerer i fremtiden. Mulige nøgleord i øjeblikket: • “scale-monitor-framebuffer” — får mutter til som standard at arrangere logiske skærme i et logisk pixelkoordinatrum, mens skærmes framebuffere skaleres frem for vinduesindholdet for at håndtere HiDPI-skærme. Fjernskrivebord med skærmdeling understøttes hvis “screen-cast” også er aktiveret. • “screen-cast” — aktiverer understøttelse af skærmoptagelse." msgstr ""
"For at slå eksperimentelle funktioner til, skal du tilføje "
"funktionsnøgleordet til listen. Om funktionen kræver genstart af "
"kompositoren afhænger af den givne funktion. Der er ingen garanti for at "
"eksperimentelle funktion forbliver tilgængelige eller mulige at konfigurere. "
"Forvent ikke at noget i denne indstilling nødvendigvis fungerer i fremtiden. "
"Mulige nøgleord i øjeblikket: • “scale-monitor-framebuffer” — får mutter til "
"som standard at arrangere logiske skærme i et logisk pixelkoordinatrum, mens "
"skærmes framebuffere skaleres frem for vinduesindholdet for at håndtere "
"HiDPI-skærme. Fjernskrivebord med skærmdeling understøttes hvis “screen-"
"cast” også er aktiveret. • “screen-cast” — aktiverer understøttelse af "
"skærmoptagelse."
#: data/org.gnome.mutter.gschema.xml.in:145 #: data/org.gnome.mutter.gschema.xml.in:145
msgid "Select window from tab popup" msgid "Select window from tab popup"
@@ -495,10 +489,41 @@ msgstr "Skift til VT 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Genaktivér genveje" msgstr "Genaktivér genveje"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Tillad indfangelse med Xwayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr "Tillad tastaturindfangelse af X11-programmer, som kører i Xwayland. For at en X11-tastaturindfangelse behandles i Wayland, skal klienten også enten sende en specifik X11-ClientMessage til rodvinduet eller være blandt de godkendte programmer i nøglen “xwayland-grab-access-rules”."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Xwayland-programmer, som må indfange tastatur"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr "Anfør navne på ressourcer eller ressourceklasser for X11-vinduer som tillades eller ikke tillades at udføre X11-tastaturindfangelse under Xwayland. Ressourcenavnet eller ressourceklassen for et givent X11-vindue kan findes med kommandoen “xprop WM_CLASS”. Værdierne understøtter jokertegnene “*” og “?”. Værdier som begynder med “!” forbydes, hvilket har præcedens over godkendelse, og dette tillader at fjerne programmer som ellers findes i systemets standardliste. Denne liste inkluderer følgende programmer: “@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@”. Brugere kan afbryde en eksisterende indfangelse ved hjælp af den særlige tastaturgenvej defineret ved nøglen “restore-shortcuts”."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Tilstandsskift (Gruppe %d)" msgstr "Tilstandsskift (Gruppe %d)"
@@ -506,37 +531,37 @@ msgstr "Tilstandsskift (Gruppe %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Skift skærm" msgstr "Skift skærm"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Vis integreret hjælp" msgstr "Vis integreret hjælp"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Indbygget terminal" msgstr "Indbygget terminal"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Ukendt" msgstr "Ukendt"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Ukendt terminal" msgstr "Ukendt terminal"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -552,42 +577,46 @@ msgstr "Bip-hændelse"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Kunne ikke åbne X Window System-terminalen “%s”\n" msgstr "Kunne ikke åbne X Window System-terminalen “%s”\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Deaktivér forbindelse til sessionshåndtering" msgstr "Deaktivér forbindelse til sessionshåndtering"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Erstat den kørende vindueshåndtering" msgstr "Erstat den kørende vindueshåndtering"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Angiv sessionhåndterings-id" msgstr "Angiv sessionhåndterings-id"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "X-terminal som bruges" msgstr "X-terminal som bruges"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Initialisér session fra gemt fil" msgstr "Initialisér session fra gemt fil"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Gør kald til X synkrone" msgstr "Gør kald til X synkrone"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Kør som en wayland-kompositor" msgstr "Kør som en wayland-kompositor"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Kør som en indlejret kompositor" msgstr "Kør som en indlejret kompositor"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Kør som fuld terminalserver, frem for indlejret" msgstr "Kør som fuld terminalserver, frem for indlejret"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Kør med X11-motor"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -642,7 +671,7 @@ msgstr "Mutter-udvidelsesmodul der skal bruges"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Arbejdsområde %d" msgstr "Arbejdsområde %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -651,7 +680,7 @@ msgstr ""
"Terminalen “%s” har allerede en vindueshåndtering; prøv tilvalget --replace " "Terminalen “%s” har allerede en vindueshåndtering; prøv tilvalget --replace "
"for at erstatte den aktuelle vindueshåndtering." "for at erstatte den aktuelle vindueshåndtering."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Skærm %d på terminal “%s” er ugyldig\n" msgstr "Skærm %d på terminal “%s” er ugyldig\n"
@@ -665,7 +694,7 @@ msgstr "Mutter blev kompileret uden understøttelse for uddybende tilstand\n"
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Tilstandsskift: Tilstand %d" msgstr "Tilstandsskift: Tilstand %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -679,6 +708,21 @@ msgstr ""
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (på %s)" msgstr "%s (på %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Flyt vindue et arbejdsområde til venstre"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Flyt vindue et arbejdsområde til højre"
#~ msgid "Move to workspace left"
#~ msgstr "Flyt til arbejdsområdet til venstre"
#~ msgid "Move to workspace right"
#~ msgstr "Flyt til arbejdsområdet til højre"
#~ msgid "Toggle shaded state"
#~ msgstr "Slå vinduesoprulning til/fra"
#~ msgid "Failed to scan themes directory: %s\n" #~ msgid "Failed to scan themes directory: %s\n"
#~ msgstr "Kunne ikke skanne temamappe: %s\n" #~ msgstr "Kunne ikke skanne temamappe: %s\n"

215
po/de.po
View File

@@ -3,26 +3,26 @@
# Matthias Warkus <mawarkus@gnome.org>, 2002. # Matthias Warkus <mawarkus@gnome.org>, 2002.
# Christian Neumair <chris@gnome-de.org>, 2002-2004. # Christian Neumair <chris@gnome-de.org>, 2002-2004.
# Hendrik Richter <hendrikr@gnome.org>, 2005, 2006, 2007, 2008. # Hendrik Richter <hendrikr@gnome.org>, 2005, 2006, 2007, 2008.
# Mario Blättermann <mario.blaettermann@gmail.com>, 2010-2013, 2016-2017. # Mario Blättermann <mario.blaettermann@gmail.com>, 2010-2013, 2016-2018.
# Christian Kirbach <Christian.Kirbach@googlemail.com>, 2009, 2011, 2012. # Christian Kirbach <Christian.Kirbach@googlemail.com>, 2009, 2011, 2012.
# Wolfgang Stöggl <c72578@yahoo.de> 2011, 2017. # Wolfgang Stöggl <c72578@yahoo.de> 2011, 2017.
# Tobias Endrigkeit <tobiasendrigkeit@googlemail.com>, 2012. # Tobias Endrigkeit <tobiasendrigkeit@googlemail.com>, 2012.
# Tim Sabsch <timæsabsch.com>, 2018.
# #
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter master\n" "Project-Id-Version: mutter master\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-26 07:59+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-02-26 21:26+0100\n"
"PO-Revision-Date: 2017-08-30 17:07+0200\n" "Last-Translator: Tim Sabsch <tim@sabsch.com>\n"
"Last-Translator: Wolfgang Stoeggl <c72578@yahoo.de>\n"
"Language-Team: Deutsch <gnome-de@gnome.org>\n" "Language-Team: Deutsch <gnome-de@gnome.org>\n"
"Language: de\n" "Language: de\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n" "Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Generator: Poedit 2.0.3\n" "X-Generator: Poedit 2.0.6\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
@@ -49,134 +49,118 @@ msgid "Move window to last workspace"
msgstr "Fenster auf letzte Arbeitsfläche verschieben" msgstr "Fenster auf letzte Arbeitsfläche verschieben"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Fenster eine Arbeitsfläche nach links verschieben"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Fenster eine Arbeitsfläche nach rechts verschieben"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Fenster eine Arbeitsfläche nach oben verschieben" msgstr "Fenster eine Arbeitsfläche nach oben verschieben"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Fenster eine Arbeitsfläche nach unten verschieben" msgstr "Fenster eine Arbeitsfläche nach unten verschieben"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Fenster einen Bildschirm nach links verschieben" msgstr "Fenster einen Bildschirm nach links verschieben"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Fenster einen Bildschirm nach rechts verschieben" msgstr "Fenster einen Bildschirm nach rechts verschieben"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Fenster einen Bildschirm nach oben verschieben" msgstr "Fenster einen Bildschirm nach oben verschieben"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Fenster einen Bildschirm nach unten verschieben" msgstr "Fenster einen Bildschirm nach unten verschieben"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Anwendungen wechseln" msgstr "Anwendungen wechseln"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Zur vorherigen Anwendung wechseln" msgstr "Zur vorherigen Anwendung wechseln"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Fenster wechseln" msgstr "Fenster wechseln"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Zum vorherigen Fenster wechseln" msgstr "Zum vorherigen Fenster wechseln"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Zwischen den Fenstern einer Anwendung wechseln" msgstr "Zwischen den Fenstern einer Anwendung wechseln"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Zum vorherigen Fenster einer Anwendung wechseln" msgstr "Zum vorherigen Fenster einer Anwendung wechseln"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Systemsteuerungen umschalten" msgstr "Systemsteuerungen umschalten"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Zur vorherigen Systemsteuerungen wechseln" msgstr "Zur vorherigen Systemsteuerungen wechseln"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Fenster sofort wechseln" msgstr "Fenster sofort wechseln"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Direkt zum vorherigen Fenster wechseln" msgstr "Direkt zum vorherigen Fenster wechseln"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Sofort zwischen den Fenstern einer Anwendung wechseln" msgstr "Sofort zwischen den Fenstern einer Anwendung wechseln"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Direkt zum vorherigen Fenster einer Anwendung wechseln" msgstr "Direkt zum vorherigen Fenster einer Anwendung wechseln"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Systemsteuerungen sofort umschalten" msgstr "Systemsteuerungen sofort umschalten"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Direkt zur vorherigen Systemsteuerungen wechseln" msgstr "Direkt zur vorherigen Systemsteuerungen wechseln"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Alle normalen Fenster verbergen" msgstr "Alle normalen Fenster verbergen"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Zur Arbeitsfläche 1 wechseln" msgstr "Zur Arbeitsfläche 1 wechseln"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Zur Arbeitsfläche 2 wechseln" msgstr "Zur Arbeitsfläche 2 wechseln"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Zur Arbeitsfläche 3 wechseln" msgstr "Zur Arbeitsfläche 3 wechseln"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Zur Arbeitsfläche 4 wechseln" msgstr "Zur Arbeitsfläche 4 wechseln"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Zur letzten Arbeitsfläche wechseln" msgstr "Zur letzten Arbeitsfläche wechseln"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Auf Arbeitsfläche links verschieben"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Auf Arbeitsfläche rechts verschieben"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Auf Arbeitsfläche darüber verschieben" msgstr "Auf Arbeitsfläche darüber verschieben"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Auf Arbeitsfläche darunter verschieben" msgstr "Auf Arbeitsfläche darunter verschieben"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "System" msgstr "System"
@@ -188,6 +172,10 @@ msgstr "Den »Befehl ausführen«-Dialog anzeigen"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Aktivitäten-Übersicht anzeigen" msgstr "Aktivitäten-Übersicht anzeigen"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Die Tastenkombinationen wiederherstellen"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Fenster" msgstr "Fenster"
@@ -213,55 +201,51 @@ msgid "Restore window"
msgstr "Fenstergröße wiederherstellen" msgstr "Fenstergröße wiederherstellen"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Fenster ein-/ausrollen"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Fenster schließen" msgstr "Fenster schließen"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Fenster verbergen" msgstr "Fenster verbergen"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Fenster verschieben" msgstr "Fenster verschieben"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Fenstergröße ändern" msgstr "Fenstergröße ändern"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "" msgstr ""
"Festlegen, ob das Fenster auf allen oder nur einer Arbeitsfläche sichtbar ist" "Festlegen, ob das Fenster auf allen oder nur einer Arbeitsfläche sichtbar ist"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Fenster anheben, falls es verdeckt ist, andernfalls absenken" msgstr "Fenster anheben, falls es verdeckt ist, andernfalls absenken"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Fenster vor die anderen Fenster anheben" msgstr "Fenster vor die anderen Fenster anheben"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Fenster hinter die anderen Fenster absenken" msgstr "Fenster hinter die anderen Fenster absenken"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Fenster vertikal maximieren" msgstr "Fenster vertikal maximieren"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Fenster horizontal maximieren" msgstr "Fenster horizontal maximieren"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Ansicht links teilen" msgstr "Ansicht links teilen"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Ansicht rechts teilen" msgstr "Ansicht rechts teilen"
@@ -319,7 +303,7 @@ msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:40 #: data/org.gnome.mutter.gschema.xml.in:40
msgid "Workspaces are managed dynamically" msgid "Workspaces are managed dynamically"
msgstr "Arbeitsflächen sollen dynamisch verwaltet werden " msgstr "Arbeitsflächen sollen dynamisch verwaltet werden"
#: data/org.gnome.mutter.gschema.xml.in:41 #: data/org.gnome.mutter.gschema.xml.in:41
msgid "" msgid ""
@@ -405,7 +389,7 @@ msgid ""
"screen of the monitor." "screen of the monitor."
msgstr "" msgstr ""
"Falls wahr, so werden neue Fenster immer in der Mitte des aktiven " "Falls wahr, so werden neue Fenster immer in der Mitte des aktiven "
"Bildschirms platziert" "Bildschirms platziert."
#: data/org.gnome.mutter.gschema.xml.in:107 #: data/org.gnome.mutter.gschema.xml.in:107
msgid "Enable experimental features" msgid "Enable experimental features"
@@ -509,10 +493,59 @@ msgstr "Zum virtuellen Terminal 12 wechseln"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Tastenkombinationen erneut aktivieren" msgstr "Tastenkombinationen erneut aktivieren"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Tastatur-Kontrollübernahmen in Xwayland erlauben"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Erlauben, dass in Xwayland laufende X11-Anwendungen Kontrolle über die "
"Tastatur übernehmen dürfen. Damit eine X11-Kontrollübernahme unter Wayland "
"durchgeführt werden kann, muss der Client auch entweder eine spezifische X11-"
"ClientMessage an das Root-Fenster senden oder in den als »whitelisted« im "
"Schlüssel »xwayland-grab-access-rules« aufgelisteten Anwendungen enthalten "
"sein."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Xwayland-Anwendungen mit Erlaubnis zur Kontrollübernahme der Tastatur"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Listet die Ressourcennamen oder -klassen von X11-Fenstern auf, die unter "
"Xwayland X11-Tastatur-Kontrollübernahmen durchführen dürfen. Ressourcenname "
"oder -klasse eines bestimmten X11-Fensters kann mit dem Befehl »xprop "
"WM_CLASS« ermittelt werden. Dabei werden »*« als Platzhalter und »?« als "
"Joker in den Wertangaben unterstützt. Mit »!« beginnende Werte gelten als "
"»blacklisted« und werden gegenüber den als »whitelisted« markierten Werten "
"bevorzugt, um in der Standardliste des Systems aufgeführte Anwendungen außer "
"Kraft zu setzen. Die Standardliste des Systems enthält die folgenden "
"Anwendungen: »@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@« Benutzer können eine "
"existierende Kontrollübernahme unterbrechen, indem sie das spezifische "
"Tastenkürzel verwenden, wie es im Schlüssel »restore-shortcuts« angegeben "
"ist."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2325
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Moduswechsel (Gruppe %d)" msgstr "Moduswechsel (Gruppe %d)"
@@ -520,37 +553,37 @@ msgstr "Moduswechsel (Gruppe %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2348
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Bildschirm wechseln" msgstr "Bildschirm wechseln"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2350
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Bildschirmhilfe anzeigen" msgstr "Bildschirmhilfe anzeigen"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Eingebaute Anzeige" msgstr "Eingebaute Anzeige"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Unbekannt" msgstr "Unbekannt"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Unbekannte Anzeige" msgstr "Unbekannte Anzeige"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -567,42 +600,46 @@ msgstr "Klangereignis"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "X-Window-Systemanzeige »%s« konnte nicht geöffnet werden\n" msgstr "X-Window-Systemanzeige »%s« konnte nicht geöffnet werden\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Verbindung zur Sitzungsverwaltung deaktivieren" msgstr "Verbindung zur Sitzungsverwaltung deaktivieren"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Den aktuellen Fensterverwalter ersetzen" msgstr "Den aktuellen Fensterverwalter ersetzen"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Kennung der Sitzungsverwaltung angeben" msgstr "Kennung der Sitzungsverwaltung angeben"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Zu verwendende X-Anzeige" msgstr "Zu verwendende X-Anzeige"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Sitzung anhand gespeicherter Datei starten" msgstr "Sitzung anhand gespeicherter Datei starten"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "X-Aufrufe abgleichen" msgstr "X-Aufrufe abgleichen"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Als Wayland-Compositor ausführen" msgstr "Als Wayland-Compositor ausführen"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Als eingebetteten Compositor ausführen" msgstr "Als eingebetteten Compositor ausführen"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Als vollwertigen Display-Server verwenden (nicht eingebettet)" msgstr "Als vollwertigen Display-Server verwenden (nicht eingebettet)"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Mit X11-Backend ausführen"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -660,7 +697,7 @@ msgstr "Zu benutzendes Mutter-Plugin"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Arbeitsfläche %d" msgstr "Arbeitsfläche %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -669,7 +706,7 @@ msgstr ""
"Bildschirm »%s« hat bereits einen Fensterverwalter. Versuchen Sie die Option " "Bildschirm »%s« hat bereits einen Fensterverwalter. Versuchen Sie die Option "
"»--replace«, um den aktuellen Fensterverwalter zu ersetzen." "»--replace«, um den aktuellen Fensterverwalter zu ersetzen."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Bildschirm %d auf Anzeige »%s« ist ungültig\n" msgstr "Bildschirm %d auf Anzeige »%s« ist ungültig\n"
@@ -678,12 +715,12 @@ msgstr "Bildschirm %d auf Anzeige »%s« ist ungültig\n"
msgid "Mutter was compiled without support for verbose mode\n" msgid "Mutter was compiled without support for verbose mode\n"
msgstr "Mutter wurde ohne Unterstützung für den redseligen Modus kompiliert\n" msgstr "Mutter wurde ohne Unterstützung für den redseligen Modus kompiliert\n"
#: src/wayland/meta-wayland-tablet-pad.c:563 #: src/wayland/meta-wayland-tablet-pad.c:567
#, c-format #, c-format
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Moduswechsel: Modus %d" msgstr "Moduswechsel: Modus %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."

518
po/eo.po
View File

@@ -2,16 +2,16 @@
# Copyright (C) 2011 Free Software Foundation, Inc. # Copyright (C) 2011 Free Software Foundation, Inc.
# This file is distributed under the same license as the mutter package. # This file is distributed under the same license as the mutter package.
# Michael MORONI < >, 2011. # Michael MORONI < >, 2011.
# Kristjan SCHMIDT <kristjan.schmidt@googlemail.com>, 2011, 2012, 2015. # Kristjan SCHMIDT <kristjan.schmidt@googlemail.com>, 2011, 2012, 2015, 2018.
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter\n" "Project-Id-Version: mutter\n"
"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=mutter" "Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?product=mutter"
"&keywords=I18N+L10N&component=general\n" "&keywords=I18N+L10N&component=general\n"
"POT-Creation-Date: 2015-02-14 11:06+0000\n" "POT-Creation-Date: 2017-12-18 16:24+0000\n"
"PO-Revision-Date: 2015-02-14 22:34+0200\n" "PO-Revision-Date: 2018-01-22 20:12+0200\n"
"Last-Translator: Kristjan SCHMIDT <kristjan.schmidt@googlemail.com>\n" "Last-Translator: Kristjan SCHMIDT <kristjan.schmidt@googlemail.com>\n"
"Language-Team: Esperanto <gnome-l10n-eo@lists.launchpad.net>\n" "Language-Team: Esperanto <gnome-eo-list@gnome.org>\n"
"Language: eo\n" "Language: eo\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
@@ -20,553 +20,675 @@ msgstr ""
"X-Generator: Virtaal 0.7.1\n" "X-Generator: Virtaal 0.7.1\n"
"X-Project-Style: gnome\n" "X-Project-Style: gnome\n"
#: ../data/50-mutter-navigation.xml.in.h:1 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
msgstr "Navigado" msgstr "Navigado"
#: ../data/50-mutter-navigation.xml.in.h:2 #: data/50-mutter-navigation.xml:9
msgid "Move window to workspace 1" msgid "Move window to workspace 1"
msgstr "Movi la fenestron al laborspaco 1" msgstr "Movi la fenestron al laborspaco 1"
#: ../data/50-mutter-navigation.xml.in.h:3 #: data/50-mutter-navigation.xml:12
msgid "Move window to workspace 2" msgid "Move window to workspace 2"
msgstr "Movi la fenestron al laborspaco 2" msgstr "Movi la fenestron al laborspaco 2"
#: ../data/50-mutter-navigation.xml.in.h:4 #: data/50-mutter-navigation.xml:15
msgid "Move window to workspace 3" msgid "Move window to workspace 3"
msgstr "Movi la fenestron al laborspaco 3" msgstr "Movi la fenestron al laborspaco 3"
#: ../data/50-mutter-navigation.xml.in.h:5 #: data/50-mutter-navigation.xml:18
msgid "Move window to workspace 4" msgid "Move window to workspace 4"
msgstr "Movi la fenestron al laborspaco 4" msgstr "Movi la fenestron al laborspaco 4"
#: ../data/50-mutter-navigation.xml.in.h:6 #: data/50-mutter-navigation.xml:21
msgid "Move window to last workspace" msgid "Move window to last workspace"
msgstr "Movi la fenestron al lasta laborspaco" msgstr "Movi la fenestron al lasta laborspaco"
#: ../data/50-mutter-navigation.xml.in.h:7 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left" msgid "Move window one workspace to the left"
msgstr "Movi la fenestron al la maldekstra laborspaco" msgstr "Movi la fenestron al la maldekstra laborspaco"
#: ../data/50-mutter-navigation.xml.in.h:8 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right" msgid "Move window one workspace to the right"
msgstr "Movi la fenestron al la dekstra laborspaco" msgstr "Movi la fenestron al la dekstra laborspaco"
#: ../data/50-mutter-navigation.xml.in.h:9 #: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Movi la fenestron al la supra laborspaco" msgstr "Movi la fenestron al la supra laborspaco"
#: ../data/50-mutter-navigation.xml.in.h:10 #: data/50-mutter-navigation.xml:33
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Movi la fenestron al la suba laborspaco" msgstr "Movi la fenestron al la suba laborspaco"
#: ../data/50-mutter-navigation.xml.in.h:11 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Movi la fenestron al la maldekstra ekrano" msgstr "Movi la fenestron al la maldekstra ekrano"
#: ../data/50-mutter-navigation.xml.in.h:12 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Movi la fenestron al la dekstra ekrano" msgstr "Movi la fenestron al la dekstra ekrano"
#: ../data/50-mutter-navigation.xml.in.h:13 #: data/50-mutter-navigation.xml:42
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Movi la fenestron al la supra ekrano" msgstr "Movi la fenestron al la supra ekrano"
#: ../data/50-mutter-navigation.xml.in.h:14 #: data/50-mutter-navigation.xml:45
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Movi la fenestron al la suba ekrano" msgstr "Movi la fenestron al la suba ekrano"
#: ../data/50-mutter-navigation.xml.in.h:15 #: data/50-mutter-navigation.xml:49
msgid "Switch applications" msgid "Switch applications"
msgstr "Ŝanĝi aplikaĵojn" msgstr "Ŝanĝi aplikaĵojn"
#: ../data/50-mutter-navigation.xml.in.h:16 #: data/50-mutter-navigation.xml:54
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Ŝalti al antaŭa aplikaĵo" msgstr "Ŝalti al antaŭa aplikaĵo"
#: ../data/50-mutter-navigation.xml.in.h:17 #: data/50-mutter-navigation.xml:58
msgid "Switch windows" msgid "Switch windows"
msgstr "Ŝanĝi fenestrojn" msgstr "Ŝanĝi fenestrojn"
#: ../data/50-mutter-navigation.xml.in.h:18 #: data/50-mutter-navigation.xml:63
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Ŝalti al antaŭa fenestro" msgstr "Ŝalti al antaŭa fenestro"
#: ../data/50-mutter-navigation.xml.in.h:19 #: data/50-mutter-navigation.xml:67
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Ŝanĝi fenestrojn de aplikaĵo" msgstr "Ŝanĝi fenestrojn de aplikaĵo"
#: ../data/50-mutter-navigation.xml.in.h:20 #: data/50-mutter-navigation.xml:72
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Ŝalti al antaŭa fenestro de aplikaĵo" msgstr "Ŝalti al antaŭa fenestro de aplikaĵo"
#: ../data/50-mutter-navigation.xml.in.h:21 #: data/50-mutter-navigation.xml:76
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Ŝanĝi sistem-kontrolojn" msgstr "Ŝanĝi sistem-kontrolojn"
#: ../data/50-mutter-navigation.xml.in.h:22 #: data/50-mutter-navigation.xml:81
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Ŝalti al antaŭa sistem-kontrolo" msgstr "Ŝalti al antaŭa sistem-kontrolo"
#: ../data/50-mutter-navigation.xml.in.h:23 #: data/50-mutter-navigation.xml:85
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Ŝanĝi rekte fenestrojn" msgstr "Ŝanĝi rekte fenestrojn"
#: ../data/50-mutter-navigation.xml.in.h:24 #: data/50-mutter-navigation.xml:90
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Ŝalti rekte al antaŭa fenestro" msgstr "Ŝalti rekte al antaŭa fenestro"
#: ../data/50-mutter-navigation.xml.in.h:25 #: data/50-mutter-navigation.xml:94
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Ŝanĝi rekte fenestrojn de aplikaĵo" msgstr "Ŝanĝi rekte fenestrojn de aplikaĵo"
#: ../data/50-mutter-navigation.xml.in.h:26 #: data/50-mutter-navigation.xml:99
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Ŝalti rekte al antaŭa fenestro de aplikaĵo" msgstr "Ŝalti rekte al antaŭa fenestro de aplikaĵo"
#: ../data/50-mutter-navigation.xml.in.h:27 #: data/50-mutter-navigation.xml:103
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Ŝalti rekte sistem-kontrolojn" msgstr "Ŝalti rekte sistem-kontrolojn"
#: ../data/50-mutter-navigation.xml.in.h:28 #: data/50-mutter-navigation.xml:108
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Ŝalti rekte al antaŭa sistem-kontrolo" msgstr "Ŝalti rekte al antaŭa sistem-kontrolo"
#: ../data/50-mutter-navigation.xml.in.h:29 #: data/50-mutter-navigation.xml:111
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Kaŝi ĉiujn normalajn fenestrojn" msgstr "Kaŝi ĉiujn normalajn fenestrojn"
#: ../data/50-mutter-navigation.xml.in.h:30 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Ŝalti al laborspaco 1" msgstr "Ŝalti al laborspaco 1"
#: ../data/50-mutter-navigation.xml.in.h:31 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Ŝalti al laborspaco 2" msgstr "Ŝalti al laborspaco 2"
#: ../data/50-mutter-navigation.xml.in.h:32 #: data/50-mutter-navigation.xml:120
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Ŝalti al laborspaco 3" msgstr "Ŝalti al laborspaco 3"
#: ../data/50-mutter-navigation.xml.in.h:33 #: data/50-mutter-navigation.xml:123
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Ŝalti al laborspaco 4" msgstr "Ŝalti al laborspaco 4"
#: ../data/50-mutter-navigation.xml.in.h:34 #: data/50-mutter-navigation.xml:126
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Ŝalti al lasta laborspaco" msgstr "Ŝalti al lasta laborspaco"
#: ../data/50-mutter-navigation.xml.in.h:35 #: data/50-mutter-navigation.xml:129
msgid "Move to workspace left" msgid "Move to workspace left"
msgstr "Movi al la maldekstra laborspaco" msgstr "Movi al la maldekstra laborspaco"
#: ../data/50-mutter-navigation.xml.in.h:36 #: data/50-mutter-navigation.xml:132
msgid "Move to workspace right" msgid "Move to workspace right"
msgstr "Movi al la dekstra laborspaco" msgstr "Movi al la dekstra laborspaco"
#: ../data/50-mutter-navigation.xml.in.h:37 #: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Movi al la supra laborspaco" msgstr "Movi al la supra laborspaco"
#: ../data/50-mutter-navigation.xml.in.h:38 #: data/50-mutter-navigation.xml:138
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Movi al la malsupra laborspaco" msgstr "Movi al la malsupra laborspaco"
#: ../data/50-mutter-system.xml.in.h:1 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sistemo" msgstr "Sistemo"
#: ../data/50-mutter-system.xml.in.h:2 #: data/50-mutter-system.xml:8
msgid "Show the run command prompt" msgid "Show the run command prompt"
msgstr "" msgstr ""
#: ../data/50-mutter-system.xml.in.h:3 #: data/50-mutter-system.xml:10
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "" msgstr ""
#: ../data/50-mutter-windows.xml.in.h:1 #: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr ""
#: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Fenestroj" msgstr "Fenestroj"
#: ../data/50-mutter-windows.xml.in.h:2 #: data/50-mutter-windows.xml:8
msgid "Activate the window menu" msgid "Activate the window menu"
msgstr "Aktivigi la fenestromenuon" msgstr "Aktivigi la fenestromenuon"
#: ../data/50-mutter-windows.xml.in.h:3 #: data/50-mutter-windows.xml:10
msgid "Toggle fullscreen mode" msgid "Toggle fullscreen mode"
msgstr "Baskuligi tutekranan reĝimon" msgstr "Baskuligi tutekranan reĝimon"
#: ../data/50-mutter-windows.xml.in.h:4 #: data/50-mutter-windows.xml:12
msgid "Toggle maximization state" msgid "Toggle maximization state"
msgstr "" msgstr ""
#: ../data/50-mutter-windows.xml.in.h:5 #: data/50-mutter-windows.xml:14
msgid "Maximize window" msgid "Maximize window"
msgstr "Maksimumigi la fenestron" msgstr "Maksimumigi la fenestron"
#: ../data/50-mutter-windows.xml.in.h:6 #: data/50-mutter-windows.xml:16
msgid "Restore window" msgid "Restore window"
msgstr "Restaŭri la fenestron" msgstr "Restaŭri la fenestron"
#: ../data/50-mutter-windows.xml.in.h:7 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state" msgid "Toggle shaded state"
msgstr "" msgstr ""
#: ../data/50-mutter-windows.xml.in.h:8 #: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Fermi la fenestron" msgstr "Fermi la fenestron"
#: ../data/50-mutter-windows.xml.in.h:9 #: data/50-mutter-windows.xml:22
msgid "Hide window" msgid "Hide window"
msgstr "Kaŝi la fenestron" msgstr "Kaŝi la fenestron"
#: ../data/50-mutter-windows.xml.in.h:10 #: data/50-mutter-windows.xml:24
msgid "Move window" msgid "Move window"
msgstr "Movi la fenestron" msgstr "Movi la fenestron"
#: ../data/50-mutter-windows.xml.in.h:11 #: data/50-mutter-windows.xml:26
msgid "Resize window" msgid "Resize window"
msgstr "Ŝanĝi la fenestrograndon" msgstr "Ŝanĝi la fenestrograndon"
#: ../data/50-mutter-windows.xml.in.h:12 #: data/50-mutter-windows.xml:29
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "" msgstr ""
#: ../data/50-mutter-windows.xml.in.h:13 #: data/50-mutter-windows.xml:31
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "" msgstr ""
#: ../data/50-mutter-windows.xml.in.h:14 #: data/50-mutter-windows.xml:33
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "" msgstr ""
#: ../data/50-mutter-windows.xml.in.h:15 #: data/50-mutter-windows.xml:35
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "" msgstr ""
#: ../data/50-mutter-windows.xml.in.h:16 #: data/50-mutter-windows.xml:37
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Vertikale maksimumigi la fenestron" msgstr "Vertikale maksimumigi la fenestron"
#: ../data/50-mutter-windows.xml.in.h:17 #: data/50-mutter-windows.xml:39
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Horizontale maksimumigi la fenestron" msgstr "Horizontale maksimumigi la fenestron"
#: ../data/50-mutter-windows.xml.in.h:18 #: data/50-mutter-windows.xml:43
msgid "View split on left" msgid "View split on left"
msgstr "" msgstr ""
#: ../data/50-mutter-windows.xml.in.h:19 #: data/50-mutter-windows.xml:47
msgid "View split on right" msgid "View split on right"
msgstr "" msgstr ""
#: ../data/mutter.desktop.in.h:1 #: data/mutter.desktop.in:4
msgid "Mutter" msgid "Mutter"
msgstr "Mutero" msgstr "Mutero"
#: ../data/org.gnome.mutter.gschema.xml.in.h:1 #: data/org.gnome.mutter.gschema.xml.in:7
msgid "Modifier to use for extended window management operations" msgid "Modifier to use for extended window management operations"
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:2 #: data/org.gnome.mutter.gschema.xml.in:8
msgid "" msgid ""
"This key will initiate the \"overlay\", which is a combination window " "This key will initiate the overlay, which is a combination window overview "
"overview and application launching system. The default is intended to be the " "and application launching system. The default is intended to be the “Windows "
"\"Windows key\" on PC hardware. It's expected that this binding either the " "key on PC hardware. Its expected that this binding either the default or "
"default or set to the empty string." "set to the empty string."
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:3 #: data/org.gnome.mutter.gschema.xml.in:20
msgid "Attach modal dialogs" msgid "Attach modal dialogs"
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:4 #: data/org.gnome.mutter.gschema.xml.in:21
msgid "" msgid ""
"When true, instead of having independent titlebars, modal dialogs appear " "When true, instead of having independent titlebars, modal dialogs appear "
"attached to the titlebar of the parent window and are moved together with " "attached to the titlebar of the parent window and are moved together with "
"the parent window." "the parent window."
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:5 #: data/org.gnome.mutter.gschema.xml.in:30
msgid "Enable edge tiling when dropping windows on screen edges" msgid "Enable edge tiling when dropping windows on screen edges"
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:6 #: data/org.gnome.mutter.gschema.xml.in:31
msgid "" msgid ""
"If enabled, dropping windows on vertical screen edges maximizes them " "If enabled, dropping windows on vertical screen edges maximizes them "
"vertically and resizes them horizontally to cover half of the available " "vertically and resizes them horizontally to cover half of the available "
"area. Dropping windows on the top screen edge maximizes them completely." "area. Dropping windows on the top screen edge maximizes them completely."
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:7 #: data/org.gnome.mutter.gschema.xml.in:40
msgid "Workspaces are managed dynamically" msgid "Workspaces are managed dynamically"
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:8 #: data/org.gnome.mutter.gschema.xml.in:41
msgid "" msgid ""
"Determines whether workspaces are managed dynamically or whether there's a " "Determines whether workspaces are managed dynamically or whether theres a "
"static number of workspaces (determined by the num-workspaces key in org." "static number of workspaces (determined by the num-workspaces key in org."
"gnome.desktop.wm.preferences)." "gnome.desktop.wm.preferences)."
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:9 #: data/org.gnome.mutter.gschema.xml.in:50
msgid "Workspaces only on primary" msgid "Workspaces only on primary"
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:10 #: data/org.gnome.mutter.gschema.xml.in:51
msgid "" msgid ""
"Determines whether workspace switching should happen for windows on all " "Determines whether workspace switching should happen for windows on all "
"monitors or only for windows on the primary monitor." "monitors or only for windows on the primary monitor."
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:11 #: data/org.gnome.mutter.gschema.xml.in:59
msgid "No tab popup" msgid "No tab popup"
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:12 #: data/org.gnome.mutter.gschema.xml.in:60
msgid "" msgid ""
"Determines whether the use of popup and highlight frame should be disabled " "Determines whether the use of popup and highlight frame should be disabled "
"for window cycling." "for window cycling."
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:13 #: data/org.gnome.mutter.gschema.xml.in:68
msgid "Delay focus changes until the pointer stops moving" msgid "Delay focus changes until the pointer stops moving"
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:14 #: data/org.gnome.mutter.gschema.xml.in:69
msgid "" msgid ""
"If set to true, and the focus mode is either \"sloppy\" or \"mouse\" then " "If set to true, and the focus mode is either sloppy or mouse then the "
"the focus will not be changed immediately when entering a window, but only " "focus will not be changed immediately when entering a window, but only after "
"after the pointer stops moving." "the pointer stops moving."
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:15 #: data/org.gnome.mutter.gschema.xml.in:79
msgid "Draggable border width" msgid "Draggable border width"
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:16 #: data/org.gnome.mutter.gschema.xml.in:80
msgid "" msgid ""
"The amount of total draggable borders. If the theme's visible borders are " "The amount of total draggable borders. If the themes visible borders are "
"not enough, invisible borders will be added to meet this value." "not enough, invisible borders will be added to meet this value."
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:17 #: data/org.gnome.mutter.gschema.xml.in:89
msgid "Auto maximize nearly monitor sized windows" msgid "Auto maximize nearly monitor sized windows"
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:18 #: data/org.gnome.mutter.gschema.xml.in:90
msgid "" msgid ""
"If enabled, new windows that are initially the size of the monitor " "If enabled, new windows that are initially the size of the monitor "
"automatically get maximized." "automatically get maximized."
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:19 #: data/org.gnome.mutter.gschema.xml.in:98
msgid "Place new windows in the center" msgid "Place new windows in the center"
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:20 #: data/org.gnome.mutter.gschema.xml.in:99
msgid "" msgid ""
"When true, the new windows will always be put in the center of the active " "When true, the new windows will always be put in the center of the active "
"screen of the monitor." "screen of the monitor."
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:21 #: data/org.gnome.mutter.gschema.xml.in:107
msgid "Enable experimental features"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:108
msgid ""
"To enable experimental features, add the feature keyword to the list. "
"Whether the feature requires restarting the compositor depends on the given "
"feature. Any experimental feature is not required to still be available, or "
"configurable. Dont expect adding anything in this setting to be future "
"proof. Currently possible keywords: • “scale-monitor-framebuffer” — makes "
"mutter default to layout logical monitors in a logical pixel coordinate "
"space, while scaling monitor framebuffers instead of window content, to "
"manage HiDPI monitors. Does not require a restart. • “remote-desktop” — "
"enables remote desktop support. To support remote desktop with screen "
"sharing, “screen-cast” must also be enabled. • “screen-cast” — enables "
"screen cast support."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:145
msgid "Select window from tab popup" msgid "Select window from tab popup"
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.gschema.xml.in.h:22 #: data/org.gnome.mutter.gschema.xml.in:150
msgid "Cancel tab popup" msgid "Cancel tab popup"
msgstr "" msgstr ""
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:1 #: data/org.gnome.mutter.gschema.xml.in:155
#, fuzzy #, fuzzy
#| msgid "Switch applications"
msgid "Switch monitor configurations"
msgstr "Ŝanĝi aplikaĵojn"
#: data/org.gnome.mutter.gschema.xml.in:160
msgid "Rotates the built-in monitor configuration"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:6
msgid "Switch to VT 1" msgid "Switch to VT 1"
msgstr "Ŝalti al VT 1" msgstr "Ŝalti al virtuala terminalo 1"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:2 #: data/org.gnome.mutter.wayland.gschema.xml.in:10
#, fuzzy
msgid "Switch to VT 2" msgid "Switch to VT 2"
msgstr "Ŝalti al VT 2" msgstr "Ŝalti al virtuala terminalo 2"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:3 #: data/org.gnome.mutter.wayland.gschema.xml.in:14
#, fuzzy
msgid "Switch to VT 3" msgid "Switch to VT 3"
msgstr "Ŝalti al VT 3" msgstr "Ŝalti al virtuala terminalo 3"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:4 #: data/org.gnome.mutter.wayland.gschema.xml.in:18
#, fuzzy
msgid "Switch to VT 4" msgid "Switch to VT 4"
msgstr "Ŝalti al VT 4" msgstr "Ŝalti al virtuala terminalo 4"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:5 #: data/org.gnome.mutter.wayland.gschema.xml.in:22
#, fuzzy
#| msgid "Switch to workspace 5" #| msgid "Switch to workspace 5"
msgid "Switch to VT 5" msgid "Switch to VT 5"
msgstr "Ŝalti al VT 5" msgstr "Ŝalti al virtuala terminalo 5"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:6 #: data/org.gnome.mutter.wayland.gschema.xml.in:26
#, fuzzy
#| msgid "Switch to workspace 6" #| msgid "Switch to workspace 6"
msgid "Switch to VT 6" msgid "Switch to VT 6"
msgstr "Ŝalti al VT 6" msgstr "Ŝalti al virtuala terminalo 6"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:7 #: data/org.gnome.mutter.wayland.gschema.xml.in:30
#, fuzzy
#| msgid "Switch to workspace 7" #| msgid "Switch to workspace 7"
msgid "Switch to VT 7" msgid "Switch to VT 7"
msgstr "Ŝalti al VT 7" msgstr "Ŝalti al virtuala terminalo 7"
#: ../src/backends/meta-monitor-manager.c:364 #: data/org.gnome.mutter.wayland.gschema.xml.in:34
msgid "Switch to VT 8"
msgstr "Ŝalti al virtuala terminalo 8"
#: data/org.gnome.mutter.wayland.gschema.xml.in:38
msgid "Switch to VT 9"
msgstr "Ŝalti al virtuala terminalo 9"
#: data/org.gnome.mutter.wayland.gschema.xml.in:42
msgid "Switch to VT 10"
msgstr "Ŝalti al virtuala terminalo 10"
#: data/org.gnome.mutter.wayland.gschema.xml.in:46
msgid "Switch to VT 11"
msgstr "Ŝalti al virtuala terminalo 11"
#: data/org.gnome.mutter.wayland.gschema.xml.in:50
msgid "Switch to VT 12"
msgstr "Ŝalti al virtuala terminalo 12"
#: data/org.gnome.mutter.wayland.gschema.xml.in:54
msgid "Re-enable shortcuts"
msgstr "Re-ŝalti klavkombinojn"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
#. TRANSLATORS: This string refers to a button that switches between
#. * different modes.
#.
#: src/backends/meta-input-settings.c:2260
#, c-format
msgid "Mode Switch (Group %d)"
msgstr ""
#. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs.
#.
#: src/backends/meta-input-settings.c:2283
#, fuzzy
#| msgid "Switch system controls"
msgid "Switch monitor"
msgstr "Ŝanĝi sistem-kontrolojn"
#: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help"
msgstr "Montri ekranhelpon"
#: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "" msgstr ""
#: ../src/backends/meta-monitor-manager.c:391 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Nekonate" msgstr "Nekonate"
#: ../src/backends/meta-monitor-manager.c:393 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Nekonata ekrano" msgstr "Nekonata ekrano"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: ../src/backends/meta-monitor-manager.c:401 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: ../src/compositor/compositor.c:456 #: src/compositor/compositor.c:479
#, c-format #, fuzzy, c-format
#| msgid ""
#| "Another compositing manager is already running on screen %i on display "
#| "\"%s\"."
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display \"%s" "Another compositing manager is already running on screen %i on display “%s”."
"\"." msgstr "Alia kunmetanta administrilo jam rulas sur ekrano %i de montrilo “%s”."
msgstr "Alia kunmetanta administrilo jam rulas sur ekrano %i de montrilo \"%s\"."
#: ../src/core/bell.c:185 #: src/core/bell.c:194
msgid "Bell event" msgid "Bell event"
msgstr "Sonoril-evento" msgstr "Sonoril-evento"
#: ../src/core/delete.c:127 #: src/core/display.c:608
#, fuzzy, c-format
#| msgid "Failed to open X Window System display '%s'\n"
msgid "Failed to open X Window System display “%s”\n"
msgstr "Malsukcesis malfermi jenan vidigon de fenestra sistemo X “%s”\n"
#: src/core/main.c:189
msgid "Disable connection to session manager"
msgstr "Elŝalti konekton al la seancoadministrilo"
#: src/core/main.c:195
msgid "Replace the running window manager"
msgstr "Anstataŭigi la nun ruliĝantan fenestromastrumilon"
#: src/core/main.c:201
msgid "Specify session management ID"
msgstr "Specifi identigilon de la seancoadministrilo"
#: src/core/main.c:206
#, fuzzy
msgid "X Display to use"
msgstr "X-Vidigo uzenda"
#: src/core/main.c:212
msgid "Initialize session from savefile"
msgstr "Pravalorizi la seancon el konservita dosiero"
#: src/core/main.c:218
msgid "Make X calls synchronous"
msgstr "Fari X-vokojn sinkrone"
#: src/core/main.c:225
msgid "Run as a wayland compositor"
msgstr ""
#: src/core/main.c:231
msgid "Run as a nested compositor"
msgstr ""
#: src/core/main.c:239
msgid "Run as a full display server, rather than nested"
msgstr ""
#. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
#| msgid "<tt>%s</tt> is not responding."
msgid "“%s” is not responding." msgid "“%s” is not responding."
msgstr "“%s” ne respondas." msgstr "“%s” ne respondas."
#: ../src/core/delete.c:129 #: src/core/meta-close-dialog-default.c:149
msgid "Application is not responding." msgid "Application is not responding."
msgstr "Aplikaĵo ne respondas." msgstr "Aplikaĵo ne respondas."
#: ../src/core/delete.c:134 #: src/core/meta-close-dialog-default.c:154
msgid "" msgid ""
"You may choose to wait a short while for it to continue or force the " "You may choose to wait a short while for it to continue or force the "
"application to quit entirely." "application to quit entirely."
msgstr "Vi povas elekti ĉu atendi iomete por la aplikaĵo aŭ perforte ĉesi ĝin." msgstr "Vi povas elekti ĉu atendi iomete por la aplikaĵo aŭ perforte ĉesi ĝin."
#: ../src/core/delete.c:141 #: src/core/meta-close-dialog-default.c:161
msgid "_Wait"
msgstr "_Atendi"
#: ../src/core/delete.c:141
msgid "_Force Quit" msgid "_Force Quit"
msgstr "Per_forta eliro" msgstr "Per_forta eliro"
#: ../src/core/display.c:562 #: src/core/meta-close-dialog-default.c:161
#, c-format msgid "_Wait"
msgid "Failed to open X Window System display '%s'\n" msgstr "_Atendi"
msgstr "Malsukcesis malfermi jenan vidigon de fenestra sistemo X: '%s'\n"
#: src/core/mutter.c:39
#: ../src/core/main.c:176
msgid "Disable connection to session manager"
msgstr "Elŝalti konekton al la seancoadministrilo"
#: ../src/core/main.c:182
msgid "Replace the running window manager"
msgstr "Anstataŭigi la nun ruliĝantan fenestromastrumilon"
#: ../src/core/main.c:188
msgid "Specify session management ID"
msgstr "Specifi identigilon de la seancoadministrilo"
#: ../src/core/main.c:193
#, fuzzy
msgid "X Display to use"
msgstr "X-Vidigo uzenda"
#: ../src/core/main.c:199
msgid "Initialize session from savefile"
msgstr "Pravalorizi la seancon el konservita dosiero"
#: ../src/core/main.c:205
msgid "Make X calls synchronous"
msgstr "Fari X-vokojn sinkrone"
#: ../src/core/main.c:212
msgid "Run as a wayland compositor"
msgstr ""
#: ../src/core/main.c:220
msgid "Run as a full display server, rather than nested"
msgstr ""
#: ../src/core/mutter.c:39
#, c-format #, c-format
#| msgid ""
#| "mutter %s\n"
#| "Copyright (C) 2001-%d Havoc Pennington, Red Hat, Inc., and others\n"
#| "This is free software; see the source for copying conditions.\n"
#| "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A "
#| "PARTICULAR PURPOSE.\n"
msgid "" msgid ""
"mutter %s\n" "mutter %s\n"
"Copyright (C) 2001-%d Havoc Pennington, Red Hat, Inc., and others\n" "Copyright © 2001-%d Havoc Pennington, Red Hat, Inc., and others\n"
"This is free software; see the source for copying conditions.\n" "This is free software; see the source for copying conditions.\n"
"There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A " "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A "
"PARTICULAR PURPOSE.\n" "PARTICULAR PURPOSE.\n"
msgstr "" msgstr ""
"Mutero %s\n" "Mutero %s\n"
"Kopirajto (C) 2001-%d Havoc PENNIGTON, Red Hat, Inc., kaj aliaj\n" "Kopirajto © 2001-%d Havoc PENNIGTON, Red Hat, Inc., kaj aliaj\n"
"Ĉi tio estas libera programaro; rigardu la fontkodon por pli da informoj.\n" "Ĉi tio estas libera programaro; rigardu la fontkodon por kondiĉoj pri "
"Ekzistas neniu GARANTIO; nek por NEGOCEBLO nek por ADAPTADO AL IU APARTA " "kopiado.\n"
"Ekzistas NENIU garantio; nek por NEGOCEBLO nek por ADAPTADO AL IU APARTA "
"CELO.\n" "CELO.\n"
#: ../src/core/mutter.c:53 #: src/core/mutter.c:53
msgid "Print version" msgid "Print version"
msgstr "Motri version" msgstr "Motri version"
#: ../src/core/mutter.c:59 #: src/core/mutter.c:59
msgid "Mutter plugin to use" msgid "Mutter plugin to use"
msgstr "" msgstr ""
#: ../src/core/prefs.c:2004 #: src/core/prefs.c:1997
#, c-format #, c-format
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Laborspaco %d" msgstr "Laborspaco %d"
#: ../src/core/screen.c:525 #: src/core/screen.c:583
#, c-format #, c-format
#| msgid "" #| msgid ""
#| "Screen %d on display \"%s\" already has a window manager; try using the --" #| "Display \"%s\" already has a window manager; try using the --replace "
#| "replace option to replace the current window manager.\n" #| "option to replace the current window manager."
msgid "" msgid ""
"Display \"%s\" already has a window manager; try using the --replace option " "Display “%s” already has a window manager; try using the --replace option to "
"to replace the current window manager." "replace the current window manager."
msgstr "" msgstr ""
"Ekrano \"%s\" jam havas fenestroadministrilon; provu uzi opcion --replace por " "Ekrano “%s” jam havas fenestroadministrilon; provu uzi la opcion --replace "
"anstataŭigi la nunan fenestroadministrilon." "por anstataŭigi la nunan fenestroadministrilon."
#: ../src/core/screen.c:607 #: src/core/screen.c:668
#, c-format #, fuzzy, c-format
msgid "Screen %d on display '%s' is invalid\n" #| msgid "Screen %d on display '%s' is invalid\n"
msgstr "Ekrano %d en vidigilo '%s' estas nevalida\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Ekrano %d en vidigilo “%s” estas nevalida\n"
#: ../src/core/util.c:118 #: src/core/util.c:120
msgid "Mutter was compiled without support for verbose mode\n" msgid "Mutter was compiled without support for verbose mode\n"
msgstr "Mutero estis kompilita sen subteno por eksplicita reĝimo\n" msgstr "Mutero estis kompilita sen subteno por eksplicita reĝimo\n"
#: ../src/x11/session.c:1815 #: src/wayland/meta-wayland-tablet-pad.c:563
#, c-format
msgid "Mode Switch: Mode %d"
msgstr "Reĝim-ŝaltilo: Reĝimo %d"
#: src/x11/session.c:1815
msgid "" msgid ""
"These windows do not support &quot;save current setup&quot; and will have to " "These windows do not support save current setup and will have to be "
"be restarted manually next time you log in." "restarted manually next time you log in."
msgstr "" msgstr ""
#: ../src/x11/window-props.c:549 #: src/x11/window-props.c:559
#, c-format #, c-format
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (ĉe %s)" msgstr "%s (ĉe %s)"

237
po/es.po
View File

@@ -7,15 +7,14 @@
# Pablo Gonzalo del Campo <pablodc@bigfoot.com>,2002,2003. # Pablo Gonzalo del Campo <pablodc@bigfoot.com>,2002,2003.
# Francisco Javier F. Serrador <serrador@cvs.gnome.org>, 2004, 2005, 2006. # Francisco Javier F. Serrador <serrador@cvs.gnome.org>, 2004, 2005, 2006.
# Jorge González <jorgegonz@svn.gnome.org>, 2007, 2008, 2009, 2010, 2011. # Jorge González <jorgegonz@svn.gnome.org>, 2007, 2008, 2009, 2010, 2011.
# Daniel Mustieles <daniel.mustieles@gmail.com>, 2011, 2012, 2013, 2014, 2015, 2016, 2017. # Daniel Mustieles <daniel.mustieles@gmail.com>, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018.
# #
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter.master\n" "Project-Id-Version: mutter.master\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-07 18:39+0000\n"
"POT-Creation-Date: 2017-08-02 10:05+0000\n" "PO-Revision-Date: 2018-02-22 12:34+0100\n"
"PO-Revision-Date: 2017-08-03 09:59+0200\n"
"Last-Translator: Daniel Mustieles <daniel.mustieles@gmail.com>\n" "Last-Translator: Daniel Mustieles <daniel.mustieles@gmail.com>\n"
"Language-Team: es <gnome-es-list@gnome.org>\n" "Language-Team: es <gnome-es-list@gnome.org>\n"
"Language: es\n" "Language: es\n"
@@ -50,134 +49,118 @@ msgid "Move window to last workspace"
msgstr "Mover la ventana a la última área de trabajo" msgstr "Mover la ventana a la última área de trabajo"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Mover la ventana un área de trabajo a la izquierda"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Mover la ventana un área de trabajo a la derecha"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Subir la ventana un área de trabajo" msgstr "Subir la ventana un área de trabajo"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Bajar la ventana un área de trabajo" msgstr "Bajar la ventana un área de trabajo"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Mover la ventana una pantalla a la izquierda" msgstr "Mover la ventana una pantalla a la izquierda"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Mover la ventana una pantalla a la derecha" msgstr "Mover la ventana una pantalla a la derecha"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Subir la ventana una pantalla" msgstr "Subir la ventana una pantalla"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Bajar la ventana una pantalla" msgstr "Bajar la ventana una pantalla"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Cambiar entre aplicaciones" msgstr "Cambiar entre aplicaciones"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Cambiar a la aplicación anterior" msgstr "Cambiar a la aplicación anterior"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Cambiar entre ventanas" msgstr "Cambiar entre ventanas"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Cambiar a la ventana anterior" msgstr "Cambiar a la ventana anterior"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Cambiar entre ventanas de una aplicación" msgstr "Cambiar entre ventanas de una aplicación"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Cambiar a la ventana anterior de una aplicación" msgstr "Cambiar a la ventana anterior de una aplicación"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Cambiar entre controles del sistema" msgstr "Cambiar entre controles del sistema"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Cambiar al control del sistema anterior" msgstr "Cambiar al control del sistema anterior"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Cambiar entre ventanas directamente" msgstr "Cambiar entre ventanas directamente"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Cambiar directamente a la ventana anterior" msgstr "Cambiar directamente a la ventana anterior"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Cambiar entre ventanas de una aplicación directamente" msgstr "Cambiar entre ventanas de una aplicación directamente"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Cambiar directamente a la ventana anterior de una aplicación" msgstr "Cambiar directamente a la ventana anterior de una aplicación"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Cambiar entre controles del sistema directamente" msgstr "Cambiar entre controles del sistema directamente"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Cambiar directamente al control del sistema anterior" msgstr "Cambiar directamente al control del sistema anterior"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Ocultar todas las ventanas normales" msgstr "Ocultar todas las ventanas normales"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Cambiar al área de trabajo 1" msgstr "Cambiar al área de trabajo 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Cambiar al área de trabajo 2" msgstr "Cambiar al área de trabajo 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Cambiar al área de trabajo 3" msgstr "Cambiar al área de trabajo 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Cambiar al área de trabajo 4" msgstr "Cambiar al área de trabajo 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Cambiar a la útima área de trabajo" msgstr "Cambiar a la útima área de trabajo"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Mover al área de trabajo de la izquierda"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Mover al área de trabajo de la derecha"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Mover al área de trabajo de la arriba" msgstr "Mover al área de trabajo de la arriba"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Mover al área de trabajo de abajo" msgstr "Mover al área de trabajo de abajo"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sistema" msgstr "Sistema"
@@ -189,6 +172,10 @@ msgstr "Mostrar el elemento «ejecutar comando»"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Mostrar la vista de actividades" msgstr "Mostrar la vista de actividades"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Restaurar los atajos de teclado"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Ventanas" msgstr "Ventanas"
@@ -214,54 +201,50 @@ msgid "Restore window"
msgstr "Restaurar la ventana" msgstr "Restaurar la ventana"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Cambiar el estado de enrollado"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Cerrar la ventana" msgstr "Cerrar la ventana"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Ocultar la ventana" msgstr "Ocultar la ventana"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Mover la ventana" msgstr "Mover la ventana"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Redimensionar la ventana" msgstr "Redimensionar la ventana"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Conmutar la ventana en todas las áreas de trabajo o sólo en una" msgstr "Conmutar la ventana en todas las áreas de trabajo o sólo en una"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Elevar la ventana si está cubierta, de lo contrario, bajarla" msgstr "Elevar la ventana si está cubierta, de lo contrario, bajarla"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Elevar la ventana sobre las otras ventanas" msgstr "Elevar la ventana sobre las otras ventanas"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Bajar la ventana por debajo de otras ventanas" msgstr "Bajar la ventana por debajo de otras ventanas"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Maximizar la ventana verticalmente" msgstr "Maximizar la ventana verticalmente"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Maximizar la ventana horizontalmente" msgstr "Maximizar la ventana horizontalmente"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Ver división a la izquierda" msgstr "Ver división a la izquierda"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Ver división a la derecha" msgstr "Ver división a la derecha"
@@ -419,44 +402,40 @@ msgid ""
"Whether the feature requires restarting the compositor depends on the given " "Whether the feature requires restarting the compositor depends on the given "
"feature. Any experimental feature is not required to still be available, or " "feature. Any experimental feature is not required to still be available, or "
"configurable. Dont expect adding anything in this setting to be future " "configurable. Dont expect adding anything in this setting to be future "
"proof. Currently possible keywords: • “monitor-config-manager” — use the new " "proof. Currently possible keywords: • “scale-monitor-framebuffer” — makes "
"monitor configuration system, aimed to replace the old one. This enables a " "mutter default to layout logical monitors in a logical pixel coordinate "
"higher level configuration API to be used by configuration applications, as " "space, while scaling monitor framebuffers instead of window content, to "
"well as the ability to configure per logical monitor scale. • “scale-monitor-" "manage HiDPI monitors. Does not require a restart. • “remote-desktop” — "
"framebuffer” — makes mutter default to layout logical monitors in a logical " "enables remote desktop support. To support remote desktop with screen "
"pixel coordinate space, while scaling monitor framebuffers instead of window " "sharing, “screen-cast” must also be enabled. • “screen-cast” — enables "
"content, to manage HiDPI monitors. Does not require a restart. Also enabling " "screen cast support."
"“monitor-config-manager” is required for this feature to be enabled."
msgstr "" msgstr ""
"Para activar las características experimentales, añada la palabra clave de " "Para activar las características experimentales, añada la palabra clave de "
"la característica a la lista. Depende de la característica que se deba " "la característica a la lista. Depende de la característica que se deba "
"reiniciar o no el compositor. Cualquier característica experimental puede no " "reiniciar o no el compositor. Cualquier característica experimental puede no "
"estar disponible o ser configurable. No espere que lo que se añada en este " "estar disponible o ser configurable. No espere que lo que se añada en este "
"escenario sirva como prueba futura. Las palabras clave actualmente " "escenario sirva como prueba futura. Las palabras clave actualmente "
"disponibles son: • \"monitor-config-manager\" - utiliza el nuevo sistema de " "disponibles son: • \"scale-monitor-framebuffer\" - convierte a mutter en la "
"configuración del monitor, destinado a sustituir el antiguo. Esto permite " "manera predeterminada de disponer monitores lógicos en un espacio lógico de "
"que las aplicaciones de configuración usen una API de configuración de nivel "
"superior, así como la capacidad de configurar el escalado de monitores "
"lógicos. • \"scale-monitor-framebuffer\" - convierte a mutter en ña manera "
"predeterminada de disponer monitores lógicos en un espacio lógico de "
"coordenadas de píxeles, al escalar framebuffers de monitores framebuffers en " "coordenadas de píxeles, al escalar framebuffers de monitores framebuffers en "
"lugar del contenido de ventana, para administrar monitores HiDPI. No " "lugar del contenido de ventana, para administrar monitores HiDPI. No "
"requiere un reinicio. También es necesario activar \"monitor-config-manager" "requiere un reinicio. • \"remote-desktop\" — activa el escritorio remoto. "
"\" para activar esta función." "Para soportarlo con compartición de pantalla es necesario activar \"screen-"
"cast\" • \"screen-cast\" — activa el soporte de compartición de pantalla."
#: data/org.gnome.mutter.gschema.xml.in:151 #: data/org.gnome.mutter.gschema.xml.in:145
msgid "Select window from tab popup" msgid "Select window from tab popup"
msgstr "Seleccionar ventana de la pestaña emergente" msgstr "Seleccionar ventana de la pestaña emergente"
#: data/org.gnome.mutter.gschema.xml.in:156 #: data/org.gnome.mutter.gschema.xml.in:150
msgid "Cancel tab popup" msgid "Cancel tab popup"
msgstr "Cancelar pestaña emergente" msgstr "Cancelar pestaña emergente"
#: data/org.gnome.mutter.gschema.xml.in:161 #: data/org.gnome.mutter.gschema.xml.in:155
msgid "Switch monitor configurations" msgid "Switch monitor configurations"
msgstr "Cambiar la configuración del monitor" msgstr "Cambiar la configuración del monitor"
#: data/org.gnome.mutter.gschema.xml.in:166 #: data/org.gnome.mutter.gschema.xml.in:160
msgid "Rotates the built-in monitor configuration" msgid "Rotates the built-in monitor configuration"
msgstr "Rota la configuración del monitor empotrado" msgstr "Rota la configuración del monitor empotrado"
@@ -512,10 +491,41 @@ msgstr "Cambiar al VT 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Volver a activar los atajos" msgstr "Volver a activar los atajos"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Permitir capturas con Xwayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Aplicaciones de Xwayland que pueden capturar el teclado"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2118 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Cambiar modo (grupo %d)" msgstr "Cambiar modo (grupo %d)"
@@ -523,37 +533,37 @@ msgstr "Cambiar modo (grupo %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2141 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Cambiar monitor" msgstr "Cambiar monitor"
#: src/backends/meta-input-settings.c:2143 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Mostrar la ayuda en pantalla" msgstr "Mostrar la ayuda en pantalla"
#: src/backends/meta-monitor-manager.c:927 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Pantalla integrada" msgstr "Pantalla integrada"
#: src/backends/meta-monitor-manager.c:950 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Desconocida" msgstr "Desconocida"
#: src/backends/meta-monitor-manager.c:952 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Pantalla desconocida" msgstr "Pantalla desconocida"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:960 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -570,42 +580,46 @@ msgstr "Evento de campana"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Ocurrió un error al abrir la pantalla de X Window System «%s»\n" msgstr "Ocurrió un error al abrir la pantalla de X Window System «%s»\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Desactivar conexión al gestor de sesión" msgstr "Desactivar conexión al gestor de sesión"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Reemplazar el gestor de ventanas en ejecución" msgstr "Reemplazar el gestor de ventanas en ejecución"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Especificar el ID se gestión de sesión" msgstr "Especificar el ID se gestión de sesión"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Pantalla X que usar" msgstr "Pantalla X que usar"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Inicializar sesión desde el archivo de salvaguarda" msgstr "Inicializar sesión desde el archivo de salvaguarda"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Hacer que las llamadas a las X sean síncronas" msgstr "Hacer que las llamadas a las X sean síncronas"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Ejecutar como compositor Wayland" msgstr "Ejecutar como compositor Wayland"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Ejecutar como compositor anidado" msgstr "Ejecutar como compositor anidado"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Ejecutar como servidor completo, en lugar de anidado" msgstr "Ejecutar como servidor completo, en lugar de anidado"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Ejecutar con «backend» de X11"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -661,7 +675,7 @@ msgstr "Complemento de mutter que usar"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Área de trabajo %d" msgstr "Área de trabajo %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -670,7 +684,7 @@ msgstr ""
"La pantalla «%s» ya tiene un gestor de ventanas; pruebe a usar la opción «--" "La pantalla «%s» ya tiene un gestor de ventanas; pruebe a usar la opción «--"
"replace» para reemplazar el gestor de ventanas activo." "replace» para reemplazar el gestor de ventanas activo."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "La ventana %d en la pantalla «%s» no es válida\n" msgstr "La ventana %d en la pantalla «%s» no es válida\n"
@@ -684,7 +698,7 @@ msgstr "Mutter fue compilado sin soporte para modo prolijo\n"
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Cambiar modo: modo %d" msgstr "Cambiar modo: modo %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -697,6 +711,21 @@ msgstr ""
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (on %s)" msgstr "%s (on %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Mover la ventana un área de trabajo a la izquierda"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Mover la ventana un área de trabajo a la derecha"
#~ msgid "Move to workspace left"
#~ msgstr "Mover al área de trabajo de la izquierda"
#~ msgid "Move to workspace right"
#~ msgstr "Mover al área de trabajo de la derecha"
#~ msgid "Toggle shaded state"
#~ msgstr "Cambiar el estado de enrollado"
#~ msgid "background texture could not be created from file" #~ msgid "background texture could not be created from file"
#~ msgstr "no se pudo crear la textura de fondo a partir de archivo" #~ msgstr "no se pudo crear la textura de fondo a partir de archivo"

1961
po/et.po

File diff suppressed because it is too large Load Diff

258
po/fr.po
View File

@@ -1,5 +1,5 @@
# French translation of mutter. # French translation of mutter.
# Copyright (C) 2002-2017 Free Software Foundation, Inc. # Copyright (C) 2002-2018 Free Software Foundation, Inc.
# This file is distributed under the same license as the metacity package. # This file is distributed under the same license as the metacity package.
# #
# Christophe Fergeau <teuf@users.sourceforge.net>, 2002. # Christophe Fergeau <teuf@users.sourceforge.net>, 2002.
@@ -11,25 +11,24 @@
# Cyprien Le Pannérer <cyplp@free.fr>, 2006. # Cyprien Le Pannérer <cyplp@free.fr>, 2006.
# Robert-André Mauchin <zebob.m@gmail.com>, 2007. # Robert-André Mauchin <zebob.m@gmail.com>, 2007.
# Stéphane Raimbault <stephane.raimbault@gmail.com>, 2007. # Stéphane Raimbault <stephane.raimbault@gmail.com>, 2007.
# Claude Paroz <claude@2xlibre.net>, 2008-2017. # Claude Paroz <claude@2xlibre.net>, 2008-2018.
# Bruno Brouard <annoa.b@gmail.com>, 2011-12. # Bruno Brouard <annoa.b@gmail.com>, 2011-12.
# Charles Monzat <superboa@hotmail.fr>, 2016.
# Jean-Baptiste Holcroft <jean-baptiste@holcroft.fr>, 2017. # Jean-Baptiste Holcroft <jean-baptiste@holcroft.fr>, 2017.
# Charles Monzat <superboa@hotmail.fr>, 2016, 2017.
#
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter master\n" "Project-Id-Version: mutter master\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?product=mutter" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-06 04:14+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-03-03 11:18+0100\n"
"PO-Revision-Date: 2017-09-05 10:52+0100\n" "Last-Translator: Claude Paroz <claude@2xlibre.net>\n"
"Last-Translator: Jean-Baptiste Holcroft <jean-baptiste@holcroft.fr>\n" "Language-Team: français <gnomefr@traduc.org>\n"
"Language-Team: French <traduc@traduc.org>\n"
"Language: fr\n" "Language: fr\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n" "Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n" "Plural-Forms: nplurals=2; plural=(n > 1);\n"
"X-Generator: Lokalize 2.0\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
@@ -56,134 +55,118 @@ msgid "Move window to last workspace"
msgstr "Déplacer la fenêtre vers le dernier espace de travail" msgstr "Déplacer la fenêtre vers le dernier espace de travail"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Déplacer la fenêtre dun espace de travail vers la gauche"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Déplacer la fenêtre dun espace de travail vers la droite"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Déplacer la fenêtre dun espace de travail vers le haut" msgstr "Déplacer la fenêtre dun espace de travail vers le haut"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Déplacer la fenêtre dun espace de travail vers le bas" msgstr "Déplacer la fenêtre dun espace de travail vers le bas"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Déplacer la fenêtre dun écran vers la gauche" msgstr "Déplacer la fenêtre dun écran vers la gauche"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Déplacer la fenêtre dun écran vers la droite" msgstr "Déplacer la fenêtre dun écran vers la droite"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Déplacer la fenêtre dun écran vers le haut" msgstr "Déplacer la fenêtre dun écran vers le haut"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Déplacer la fenêtre dun écran vers le bas" msgstr "Déplacer la fenêtre dun écran vers le bas"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Changer dapplication" msgstr "Changer dapplication"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Passer à lapplication précédente" msgstr "Passer à lapplication précédente"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Changer de fenêtre" msgstr "Changer de fenêtre"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Passer à la fenêtre précédente" msgstr "Passer à la fenêtre précédente"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Changer de fenêtre dune application" msgstr "Changer de fenêtre dune application"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Passer à la fenêtre précédente dune application" msgstr "Passer à la fenêtre précédente dune application"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Changer les contrôles système" msgstr "Changer les contrôles système"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Passer au contrôle système précédent" msgstr "Passer au contrôle système précédent"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Changer de fenêtre directement" msgstr "Changer de fenêtre directement"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Passer directement à la fenêtre précédente" msgstr "Passer directement à la fenêtre précédente"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Changer de fenêtre dune application directement" msgstr "Changer de fenêtre dune application directement"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Passer directement à la fenêtre précédente dune application" msgstr "Passer directement à la fenêtre précédente dune application"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Changer les contrôles système directement" msgstr "Changer les contrôles système directement"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Passer directement au contrôle système précédent" msgstr "Passer directement au contrôle système précédent"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Masquer toutes les fenêtres normales" msgstr "Masquer toutes les fenêtres normales"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Passer à lespace de travail 1" msgstr "Passer à lespace de travail 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Passer à lespace de travail 2" msgstr "Passer à lespace de travail 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Passer à lespace de travail 3" msgstr "Passer à lespace de travail 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Passer à lespace de travail 4" msgstr "Passer à lespace de travail 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Passer au dernier espace de travail" msgstr "Passer au dernier espace de travail"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Déplacer vers lespace de travail de gauche"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Déplacer vers lespace de travail de droite"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Déplacer vers lespace de travail du dessus" msgstr "Déplacer vers lespace de travail du dessus"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Déplacer vers lespace de travail du dessous" msgstr "Déplacer vers lespace de travail du dessous"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Système" msgstr "Système"
@@ -195,6 +178,10 @@ msgstr "Afficher la fenêtre pour lancer une commande"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Afficher laperçu des activités" msgstr "Afficher laperçu des activités"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Restaurer les raccourcis clavier"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Fenêtres" msgstr "Fenêtres"
@@ -220,55 +207,51 @@ msgid "Restore window"
msgstr "Restaurer la fenêtre" msgstr "Restaurer la fenêtre"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Basculer létat de repli"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Fermer la fenêtre" msgstr "Fermer la fenêtre"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Masquer la fenêtre" msgstr "Masquer la fenêtre"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Déplacer la fenêtre" msgstr "Déplacer la fenêtre"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Redimensionner la fenêtre" msgstr "Redimensionner la fenêtre"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Placer la fenêtre sur tous les espaces de travail, ou sur un seul" msgstr "Placer la fenêtre sur tous les espaces de travail, ou sur un seul"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "" msgstr ""
"Mettre la fenêtre au premier plan si elle est cachée, sinon à larrière-plan" "Mettre la fenêtre au premier plan si elle est cachée, sinon à larrière-plan"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Mettre la fenêtre au premier plan" msgstr "Mettre la fenêtre au premier plan"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Mettre la fenêtre sous les autres fenêtres" msgstr "Mettre la fenêtre sous les autres fenêtres"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Maximiser la fenêtre verticalement" msgstr "Maximiser la fenêtre verticalement"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Maximiser la fenêtre horizontalement" msgstr "Maximiser la fenêtre horizontalement"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Vue divisée sur la gauche" msgstr "Vue divisée sur la gauche"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Vue divisée sur la droite" msgstr "Vue divisée sur la droite"
@@ -418,20 +401,6 @@ msgid "Enable experimental features"
msgstr "Activer les fonctionnalités expérimentales" msgstr "Activer les fonctionnalités expérimentales"
#: data/org.gnome.mutter.gschema.xml.in:108 #: data/org.gnome.mutter.gschema.xml.in:108
#| msgid ""
#| "To enable experimental features, add the feature keyword to the list. "
#| "Whether the feature requires restarting the compositor depends on the "
#| "given feature. Any experimental feature is not required to still be "
#| "available, or configurable. Dont expect adding anything in this setting "
#| "to be future proof. Currently possible keywords: • “monitor-config-"
#| "manager” — use the new monitor configuration system, aimed to replace the "
#| "old one. This enables a higher level configuration API to be used by "
#| "configuration applications, as well as the ability to configure per "
#| "logical monitor scale. • “scale-monitor-framebuffer” — makes mutter "
#| "default to layout logical monitors in a logical pixel coordinate space, "
#| "while scaling monitor framebuffers instead of window content, to manage "
#| "HiDPI monitors. Does not require a restart. Also enabling “monitor-config-"
#| "manager” is required for this feature to be enabled."
msgid "" msgid ""
"To enable experimental features, add the feature keyword to the list. " "To enable experimental features, add the feature keyword to the list. "
"Whether the feature requires restarting the compositor depends on the given " "Whether the feature requires restarting the compositor depends on the given "
@@ -448,16 +417,15 @@ msgstr ""
"Pour activer les fonctionnalités expérimentales, ajoutez le mot-clé de la " "Pour activer les fonctionnalités expérimentales, ajoutez le mot-clé de la "
"fonctionnalité dans la liste. Selon la fonctionnalité, il peut être " "fonctionnalité dans la liste. Selon la fonctionnalité, il peut être "
"nécessaire de redémarrer le compositeur. Chaque fonctionnalité expérimentale " "nécessaire de redémarrer le compositeur. Chaque fonctionnalité expérimentale "
"peut disparaître ou ne plus être configurable. Ne vous attendez pas à ce que" "peut disparaître ou ne plus être configurable. Ne vous attendez pas à ce que "
" le " "le contenu de ce réglage soit stable dans le temps. Les mots-clés "
"contenu de ce réglage soit stable dans le temps. Les mots-clés actuellement " "actuellement possibles sont : • « scale-monitor-framebuffer » — demande à "
"possibles sont : • « scale-monitor-framebuffer » — demande à mutter " "mutter dutiliser par défaut une disposition par moniteur logique dans un "
"dutiliser par défaut une disposition par moniteur logique dans un espace de " "espace de coordonnées de pixels logique, tout en mettant à léchelle les "
"coordonnées de pixels logique, tout en mettant à léchelle les "
 framebuffers » de moniteur au lieu des contenus de fenêtre pour pouvoir "  framebuffers » de moniteur au lieu des contenus de fenêtre pour pouvoir "
"gérer les moniteurs à haute densité. Cela ne nécessite pas de redémarrage. " "gérer les moniteurs à haute densité. Cela ne nécessite pas de redémarrage. "
"« remote-desktop » — active la prise en charge du bureau à distance. Pour "  remote-desktop » — active la prise en charge du bureau à distance. Pour la "
"la prise en charge du bureau distant avec partage de lécran, « screen-cast » " "prise en charge du bureau distant avec partage de lécran, « screen-cast » "
"doit aussi être activé. • « screen-cast » — active la diffusion de lécran. " "doit aussi être activé. • « screen-cast » — active la diffusion de lécran. "
#: data/org.gnome.mutter.gschema.xml.in:145 #: data/org.gnome.mutter.gschema.xml.in:145
@@ -530,48 +498,94 @@ msgstr "Passer à lémulateur de terminal 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Réactiver les raccourcis" msgstr "Réactiver les raccourcis"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Autoriser les captures clavier avec Xwayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Permettre aux captures de clavier émises par les applications X11 tournant "
"dans Xwayland dêtre prises en compte. Pour que ceci puisse arriver, le "
"client doit aussi soit envoyer un ClientMessage X11 spécifique à la "
"fenêtre racine, soit figurer dans les applications autorisées dans la clé "
 xwayland-access-rules »."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Applications Xwayland autorisées à émettre des captures clavier"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Liste de noms de ressources ou de classes de ressources de fenêtres X11 "
"autorisées ou non à émettre des captures clavier sous Xwayland. Le nom ou "
"la classe de ressource dune fenêtre X11 donnée peut être obtenue à laide "
"de la commande « xprop WM_CLASS ». Les caractères joker « * » et « ? » sont "
"acceptées dans les valeurs. Les valeurs commençant pas « ! » sont en liste "
"noire, qui a priorité sur la liste blanche, pour révoquer les applications "
"de la liste système par défaut. Celle-ci contient les applications suivantes : "
"« @XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@ ». Les utilisateurs peuvent casser une "
"capture existante en utilisant le raccourci clavier spécifique défini par "
"la combinaison de touches « restore-shortcuts »."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Changement de mode (groupe %d)" msgstr "Changement de mode (groupe %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Changer de moniteur" msgstr "Changer de moniteur"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Afficher laide à lécran" msgstr "Afficher laide à lécran"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Affichage intégré" msgstr "Affichage intégré"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Inconnu" msgstr "Inconnu"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Affichage inconnu" msgstr "Affichage inconnu"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -588,42 +602,46 @@ msgstr "Évènement sonore"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Impossible douvrir laffichage « %s » du système X Window\n" msgstr "Impossible douvrir laffichage « %s » du système X Window\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Désactiver la connexion au gestionnaire de sessions" msgstr "Désactiver la connexion au gestionnaire de sessions"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Remplacer le gestionnaire de fenêtres en cours de fonctionnement" msgstr "Remplacer le gestionnaire de fenêtres en cours de fonctionnement"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Indiquer lID de gestion de sessions" msgstr "Indiquer lID de gestion de sessions"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Affichage X à utiliser" msgstr "Affichage X à utiliser"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Initialiser la session depuis le fichier de sauvegarde" msgstr "Initialiser la session depuis le fichier de sauvegarde"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Rendre synchrones les appels à X" msgstr "Rendre synchrones les appels à X"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Lancer comme un compositeur wayland" msgstr "Lancer comme un compositeur wayland"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Lancer comme un compositeur imbriqué" msgstr "Lancer comme un compositeur imbriqué"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Lancer comme un serveur daffichage complet, plutôt quimbriqué" msgstr "Lancer comme un serveur daffichage complet, plutôt quimbriqué"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Lancer avec le moteur X11"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -679,7 +697,7 @@ msgstr "Greffon de Mutter à utiliser"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Espace de travail %d" msgstr "Espace de travail %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -688,7 +706,7 @@ msgstr ""
"Laffichage « %s » a déjà un gestionnaire de fenêtres ; essayez dutiliser " "Laffichage « %s » a déjà un gestionnaire de fenêtres ; essayez dutiliser "
"loption --replace pour remplacer le gestionnaire de fenêtres actuel." "loption --replace pour remplacer le gestionnaire de fenêtres actuel."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Lécran %d sur laffichage « %s » nest pas valide\n" msgstr "Lécran %d sur laffichage « %s » nest pas valide\n"
@@ -702,7 +720,7 @@ msgstr "Mutter a été compilé sans la prise en charge du mode bavard\n"
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Changement de mode : mode %d" msgstr "Changement de mode : mode %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -716,3 +734,17 @@ msgstr ""
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (sur %s)" msgstr "%s (sur %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Déplacer la fenêtre dun espace de travail vers la gauche"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Déplacer la fenêtre dun espace de travail vers la droite"
#~ msgid "Move to workspace left"
#~ msgstr "Déplacer vers lespace de travail de gauche"
#~ msgid "Move to workspace right"
#~ msgstr "Déplacer vers lespace de travail de droite"
#~ msgid "Toggle shaded state"
#~ msgstr "Basculer létat de repli"

259
po/fur.po
View File

@@ -6,17 +6,16 @@
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter master\n" "Project-Id-Version: mutter master\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-06-07 13:00+0000\n"
"POT-Creation-Date: 2017-07-22 09:45+0000\n" "PO-Revision-Date: 2018-06-29 15:33+0200\n"
"PO-Revision-Date: 2017-07-22 22:53+0200\n"
"Last-Translator: Fabio Tomat <f.t.public@gmail.com>\n" "Last-Translator: Fabio Tomat <f.t.public@gmail.com>\n"
"Language-Team: Friulian <fur@li.org>\n" "Language-Team: Friulian <fur@li.org>\n"
"Language: fur\n" "Language: fur\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n" "Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.0.2\n" "X-Generator: Poedit 2.0.8\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
@@ -43,145 +42,133 @@ msgid "Move window to last workspace"
msgstr "Sposte barcon tal ultin spazi di lavôr" msgstr "Sposte barcon tal ultin spazi di lavôr"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Sposte barcon tal spazi di lavôr a çampe"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Sposte barcon tal spazi di lavôr a drete"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Sposte barcon tal spazi di lavôr parsore" msgstr "Sposte barcon tal spazi di lavôr parsore"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Sposte barcon tal spazi di lavôr sot" msgstr "Sposte barcon tal spazi di lavôr sot"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Sposte barcon tal visôr a çampe" msgstr "Sposte barcon tal visôr a çampe"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Sposte barcon tal visôr a drete" msgstr "Sposte barcon tal visôr a drete"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Sposte barcon tal visôr parsore" msgstr "Sposte barcon tal visôr parsore"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Sposte barcon tal visôr sot" msgstr "Sposte barcon tal visôr sot"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Passâ di une aplicazion in chê altre" msgstr "Passâ di une aplicazion in chê altre"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Passe ae aplicazion prime" msgstr "Passe ae aplicazion prime"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Passâ di un barcon in chel altri" msgstr "Passâ di un barcon in chel altri"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Passe al barcon prime" msgstr "Passe al barcon prime"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Passâ di un barcon in chel altri di une aplicazion" msgstr "Passâ di un barcon in chel altri di une aplicazion"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Passe al barcon prime di une aplicazion" msgstr "Passe al barcon prime di une aplicazion"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Passâ di un control di sisteme in chel altri" msgstr "Passâ di un control di sisteme in chel altri"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Passe al control di sisteme precedent" msgstr "Passe al control di sisteme precedent"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Passe dret ai barcons" msgstr "Passe dret ai barcons"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Passe dret al barcon precedent" msgstr "Passe dret al barcon precedent"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Passe dret a un barcon di une aplicazion" msgstr "Passe dret a un barcon di une aplicazion"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Passe dret al barcon precedent di une aplicazion" msgstr "Passe dret al barcon precedent di une aplicazion"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Passe dret ai controi dal sisteme" msgstr "Passe dret ai controi dal sisteme"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Passe dret al control precedent dal sisteme" msgstr "Passe dret al control precedent dal sisteme"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Plate ducj i barcons normâi" msgstr "Plate ducj i barcons normâi"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Passe al spazi di lavôr 1" msgstr "Passe al spazi di lavôr 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Passe al spazi di lavôr 2" msgstr "Passe al spazi di lavôr 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Passe al spazi di lavôr 3" msgstr "Passe al spazi di lavôr 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Passe al spazi di lavôr 4" msgstr "Passe al spazi di lavôr 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Passe al ultin spazi di lavôr" msgstr "Passe al ultin spazi di lavôr"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Sposte il spazi di lavôr a çampe"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Sposte il spazi di lavôr a drete"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Sposte il spazi di lavôr parsore" msgstr "Sposte il spazi di lavôr parsore"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Sposte il spazi di lavôr sot" msgstr "Sposte il spazi di lavôr sot"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sisteme" msgstr "Sisteme"
#: data/50-mutter-system.xml:8 #: data/50-mutter-system.xml:8
msgid "Show the run command prompt" msgid "Show the run command prompt"
msgstr "Mostre la richieste \"eseguìs comant\"" msgstr "Mostre la richieste eseguìs comant"
#: data/50-mutter-system.xml:10 #: data/50-mutter-system.xml:10
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Mostre la panoramiche ativitâts" msgstr "Mostre la panoramiche ativitâts"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Ripristine lis scurtis di tastiere"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Barcons" msgstr "Barcons"
@@ -207,54 +194,50 @@ msgid "Restore window"
msgstr "Ripristine barcon" msgstr "Ripristine barcon"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Ative/Disative stât inrodolât"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Siere il barcon" msgstr "Siere il barcon"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Plate il barcon" msgstr "Plate il barcon"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Sposte il barcon" msgstr "Sposte il barcon"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Ridimensione barcon" msgstr "Ridimensione barcon"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Ative/Disative barcon su ducj i spazis di lavôr o nome un" msgstr "Ative/Disative barcon su ducj i spazis di lavôr o nome un"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Tire sù il barcon se al è cuviert, se no sbassilu" msgstr "Tire sù il barcon se al è cuviert, se no sbassilu"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Met il barcon parsore di chei altris" msgstr "Met il barcon parsore di chei altris"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Bute il barcon sot di chei altris" msgstr "Bute il barcon sot di chei altris"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Slargje il barcon par verticâl" msgstr "Slargje il barcon par verticâl"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Slargje il barcon par orizontâl" msgstr "Slargje il barcon par orizontâl"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Slargje dividint ae çampe" msgstr "Slargje dividint ae çampe"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Slargje dividint ae drete" msgstr "Slargje dividint ae drete"
@@ -405,14 +388,10 @@ msgid ""
"Whether the feature requires restarting the compositor depends on the given " "Whether the feature requires restarting the compositor depends on the given "
"feature. Any experimental feature is not required to still be available, or " "feature. Any experimental feature is not required to still be available, or "
"configurable. Dont expect adding anything in this setting to be future " "configurable. Dont expect adding anything in this setting to be future "
"proof. Currently possible keywords: • “monitor-config-manager” — use the new " "proof. Currently possible keywords: • “scale-monitor-framebuffer” — makes "
"monitor configuration system, aimed to replace the old one. This enables a " "mutter default to layout logical monitors in a logical pixel coordinate "
"higher level configuration API to be used by configuration applications, as " "space, while scaling monitor framebuffers instead of window content, to "
"well as the ability to configure per logical monitor scale. • “scale-monitor-" "manage HiDPI monitors. Does not require a restart."
"framebuffer” — makes mutter default to layout logical monitors in a logical "
"pixel coordinate space, while scaling monitor framebuffers instead of window "
"content, to manage HiDPI monitors. Does not require a restart. Also enabling "
"“monitor-config-manager” is required for this feature to be enabled."
msgstr "" msgstr ""
"Par abilitâ lis funzionalitâts sperimentâls, zonte la peraule clâf de " "Par abilitâ lis funzionalitâts sperimentâls, zonte la peraule clâf de "
"funzionalitât ae liste. Il fat che la funzionalitât e vedi bisugne di tornâ " "funzionalitât ae liste. Il fat che la funzionalitât e vedi bisugne di tornâ "
@@ -420,30 +399,24 @@ msgstr ""
"funzionalitât sperimentâl no je necessarie che e sedi disponibile o " "funzionalitât sperimentâl no je necessarie che e sedi disponibile o "
"configurabile. No sta spietâti di zontâ alc in cheste impostazion e pensâ " "configurabile. No sta spietâti di zontâ alc in cheste impostazion e pensâ "
"che e duredi tal timp. Atualmentri lis peraulis clâf pussibilis a son: • " "che e duredi tal timp. Atualmentri lis peraulis clâf pussibilis a son: • "
"“monitor-config-manager” — al dopre il gnûf sisteme di configurazion dal " "“scale-monitor-framebuffer” — al rint come predefinît par mutter, la "
"visôr, fat par sostituî chel vecjo. Chest al abilite une API di nivel " "disposizion logjiche dai visôrs intun spazi logjic di coordenadis di pixel, "
"superiôr che e pues jessi doprade di aplicazions di configurazion, cussì " "in plui si fâs il scjalâ dai framebuffer dai visôrs invezit che il contignût "
"come la capacitât di configurâ par scjale di monitor logjic. • “scale-" "dal barcon; dut chest par gjestî i visôrs HiDPI. Nol covente tornâ a inviâ."
"monitor-framebuffer” — al rint come predefinît par mutter la disposizion dai "
"visôrs logjics intun spazi logjic di coordenadis dai pixel, intant i "
"framebuffer dai visôrs par scjalâ, invezit dal contignût dal barcon, a "
"gjestissin i visôrs HiDPI. Nol covente tornâ a inviâ. In plui al è necessari "
"abilitâ “monitor-config-manager” par fâ in mût che cheste funzionalitât e "
"sedi abilitade."
#: data/org.gnome.mutter.gschema.xml.in:151 #: data/org.gnome.mutter.gschema.xml.in:141
msgid "Select window from tab popup" msgid "Select window from tab popup"
msgstr "Selezione barcon dal tab popup" msgstr "Selezione barcon dal tab popup"
#: data/org.gnome.mutter.gschema.xml.in:156 #: data/org.gnome.mutter.gschema.xml.in:146
msgid "Cancel tab popup" msgid "Cancel tab popup"
msgstr "Anule tab popup" msgstr "Anule tab popup"
#: data/org.gnome.mutter.gschema.xml.in:161 #: data/org.gnome.mutter.gschema.xml.in:151
msgid "Switch monitor configurations" msgid "Switch monitor configurations"
msgstr "Cambie configurazions visôr" msgstr "Cambie configurazions visôr"
#: data/org.gnome.mutter.gschema.xml.in:166 #: data/org.gnome.mutter.gschema.xml.in:156
msgid "Rotates the built-in monitor configuration" msgid "Rotates the built-in monitor configuration"
msgstr "Al volte la configurazion dal visôr integrât" msgstr "Al volte la configurazion dal visôr integrât"
@@ -495,10 +468,61 @@ msgstr "Passe al VT 11"
msgid "Switch to VT 12" msgid "Switch to VT 12"
msgstr "Passe al VT 12" msgstr "Passe al VT 12"
#: data/org.gnome.mutter.wayland.gschema.xml.in:54
msgid "Re-enable shortcuts"
msgstr "Torne abilite lis scurtis"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Permet cjapadis di control cun Xwayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Permet che il cjapâ il control de tastiere emetût di aplicazions X11 che a "
"zirin in Xwayland, di jessi tignûts in considerazion. Par une cjapade di "
"control di X11, par che e sedi tignude in considerazion sot Wayland, il "
"client al scugne ancje inviâ un specific messaç (X11 ClientMessage) al "
"barcon lidrîs o jessi tra lis aplicazions metudis te liste blancje inte clâf "
"“xwayland-grab-access-rules”."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Aplicazions Xwayland che a puedin cjapâ la tastiere"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Liste di nons di risorsis o classis di risorsis di barcons X11 che a puedin "
"o no puedin cjapâ i segnâi di tastiere X11 sot di Xwayland. Il non de "
"risorse o la classe de risorse di un dât barcon X11 al pues jessi otignût "
"doprant il comant “xprop WM_CLASS”. I caratars “*” e “?” tai valôrs a son "
"supuartâts. I valôrs che a tachin cun “!” a son metûts te liste nere, che e "
"à precedence su la liste blancje, par revocâ lis aplicazions de liste di "
"sisteme predefinide. La liste di sisteme predefinide e inclût lis "
"aplicazions chi daurman: “@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” I utents a "
"puedin interompi il control cjapât doprant la specifiche scurte di tastiere "
"definide de clâf di associazion tast “restore-shortcuts”."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2118 #: src/backends/meta-input-settings.c:2325
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Cambie mût (Grup %d)" msgstr "Cambie mût (Grup %d)"
@@ -506,37 +530,37 @@ msgstr "Cambie mût (Grup %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2141 #: src/backends/meta-input-settings.c:2348
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Cambie visôr" msgstr "Cambie visôr"
#: src/backends/meta-input-settings.c:2143 #: src/backends/meta-input-settings.c:2350
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Mostre jutori a schermi" msgstr "Mostre jutori a schermi"
#: src/backends/meta-monitor-manager.c:925 #: src/backends/meta-monitor-manager.c:903
msgid "Built-in display" msgid "Built-in display"
msgstr "Display integrât" msgstr "Display integrât"
#: src/backends/meta-monitor-manager.c:948 #: src/backends/meta-monitor-manager.c:926
msgid "Unknown" msgid "Unknown"
msgstr "No cognossût" msgstr "No cognossût"
#: src/backends/meta-monitor-manager.c:950 #: src/backends/meta-monitor-manager.c:928
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Display no cognossût" msgstr "Display no cognossût"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:958 #: src/backends/meta-monitor-manager.c:936
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -553,42 +577,46 @@ msgstr "Event cjampane"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Impussibil vierzi il display “%s” di X Window System\n" msgstr "Impussibil vierzi il display “%s” di X Window System\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Disabilite la conession al gjestôr de session" msgstr "Disabilite la conession al gjestôr de session"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Rimplace il window manager in vore" msgstr "Rimplace il window manager in vore"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Specifiche il ID di gjestion session" msgstr "Specifiche il ID di gjestion session"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Display X di doprâ" msgstr "Display X di doprâ"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Inizialize session da file salvât" msgstr "Inizialize session da file salvât"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Fâs lis clamadis X sincronis" msgstr "Fâs lis clamadis X sincronis"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Eseguìs come compositor wayland" msgstr "Eseguìs come compositor wayland"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Eseguìs come compositor nidiât" msgstr "Eseguìs come compositor nidiât"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Eseguìs come servidôr display complet, invezit che nidiât" msgstr "Eseguìs come servidôr display complet, invezit che nidiât"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Eseguìs cul backend X11"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -643,7 +671,7 @@ msgstr "Plugin Mutter di doprâ"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Spazi di lavôr %d" msgstr "Spazi di lavôr %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -652,7 +680,7 @@ msgstr ""
"Il display “%s” al à za un window manager; prove dopre la opzion --replace " "Il display “%s” al à za un window manager; prove dopre la opzion --replace "
"par rimplaçâ chel atuâl." "par rimplaçâ chel atuâl."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Schermi %d su display “%s” no valit\n" msgstr "Schermi %d su display “%s” no valit\n"
@@ -661,12 +689,12 @@ msgstr "Schermi %d su display “%s” no valit\n"
msgid "Mutter was compiled without support for verbose mode\n" msgid "Mutter was compiled without support for verbose mode\n"
msgstr "Mutter al è stât compilât cence supuart pe modalitât fetose\n" msgstr "Mutter al è stât compilât cence supuart pe modalitât fetose\n"
#: src/wayland/meta-wayland-tablet-pad.c:563 #: src/wayland/meta-wayland-tablet-pad.c:567
#, c-format #, c-format
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Cambie mût: mût %d" msgstr "Cambie mût: mût %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -678,3 +706,18 @@ msgstr ""
#, c-format #, c-format
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (su %s)" msgstr "%s (su %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Sposte barcon tal spazi di lavôr a çampe"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Sposte barcon tal spazi di lavôr a drete"
#~ msgid "Move to workspace left"
#~ msgstr "Sposte il spazi di lavôr a çampe"
#~ msgid "Move to workspace right"
#~ msgstr "Sposte il spazi di lavôr a drete"
#~ msgid "Toggle shaded state"
#~ msgstr "Ative/Disative stât inrodolât"

335
po/gd.po
View File

@@ -1,14 +1,13 @@
# Scottish Gaelic translation for mutter. # Scottish Gaelic translation for mutter.
# Copyright (C) 2016 mutter's COPYRIGHT HOLDER # Copyright (C) 2016 mutter's COPYRIGHT HOLDER
# This file is distributed under the same license as the mutter package. # This file is distributed under the same license as the mutter package.
# GunChleoc <fios@foramnagaidhlig.net>, 2016, 2017. # GunChleoc <fios@foramnagaidhlig.net>, 2016, 2017, 2018.
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter master\n" "Project-Id-Version: mutter master\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?product=mutte" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"r&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-01-27 08:02+0000\n"
"POT-Creation-Date: 2017-03-02 11:37+0000\n" "PO-Revision-Date: 2018-03-01 10:45+0100\n"
"PO-Revision-Date: 2017-03-07 11:59+0100\n"
"Last-Translator: GunChleoc <fios@foramnagaidhlig.net>\n" "Last-Translator: GunChleoc <fios@foramnagaidhlig.net>\n"
"Language-Team: Fòram na Gàidhlig\n" "Language-Team: Fòram na Gàidhlig\n"
"Language: gd\n" "Language: gd\n"
@@ -18,6 +17,7 @@ msgstr ""
"Plural-Forms: nplurals=4; plural=(n==1 || n==11) ? 0 : (n==2 || n==12) ? 1 : " "Plural-Forms: nplurals=4; plural=(n==1 || n==11) ? 0 : (n==2 || n==12) ? 1 : "
"(n > 2 && n < 20) ? 2 : 3;\n" "(n > 2 && n < 20) ? 2 : 3;\n"
"X-Generator: Virtaal 0.7.1\n" "X-Generator: Virtaal 0.7.1\n"
"(n > 2 && n < 20) ? 2: 3;\n"
"X-Project-Style: gnome\n" "X-Project-Style: gnome\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
@@ -166,13 +166,13 @@ msgstr "Gluais dhan rum-obrach air an taobh deas"
#: data/50-mutter-navigation.xml:135 #: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Gluais dhan rum-obrach aig a' bharr" msgstr "Gluais dhan rum-obrach aig a bharr"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:138
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Gluais dhan rum-obrach aig a' bhonn" msgstr "Gluais dhan rum-obrach aig a bhonn"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "An siostam" msgstr "An siostam"
@@ -184,6 +184,10 @@ msgstr ""
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Foir-shealladh air na gnìomhachdan" msgstr "Foir-shealladh air na gnìomhachdan"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Aisig ath-ghoiridean a mheur-chlàir"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Uinneagan" msgstr "Uinneagan"
@@ -250,7 +254,7 @@ msgstr "Làn-mheudaich an uinneag gu h-ingearach"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:39
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Làn-mheudaich an uinneag air a' chòmhnard" msgstr "Làn-mheudaich an uinneag air a chòmhnard"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:43
msgid "View split on left" msgid "View split on left"
@@ -262,284 +266,135 @@ msgstr "Sgoilt an t-sealladh air an taobh deas"
#: data/mutter.desktop.in:4 #: data/mutter.desktop.in:4
msgid "Mutter" msgid "Mutter"
msgstr "" msgstr "Mutter"
#: data/org.gnome.mutter.gschema.xml.in:7 #: data/org.gnome.mutter.gschema.xml.in:155
msgid "Modifier to use for extended window management operations" #| msgid "Switch monitor"
msgstr "" msgid "Switch monitor configurations"
msgstr "Gearr leum eadar rèiteachaidhean monatair"
#: data/org.gnome.mutter.gschema.xml.in:8 #. TRANSLATORS: This string refers to a button that switches between
msgid "" #. * different modes.
"This key will initiate the \"overlay\", which is a combination window " #.
"overview and application launching system. The default is intended to be the " #: src/backends/meta-input-settings.c:2167
"\"Windows key\" on PC hardware. It's expected that this binding either the " #, c-format
"default or set to the empty string." #| msgid "Mode Switch: Mode %d"
msgstr "" msgid "Mode Switch (Group %d)"
msgstr "Suidse nam modh (Buidheann %d)"
#: data/org.gnome.mutter.gschema.xml.in:20
msgid "Attach modal dialogs"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:21
msgid ""
"When true, instead of having independent titlebars, modal dialogs appear "
"attached to the titlebar of the parent window and are moved together with "
"the parent window."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:30
msgid "Enable edge tiling when dropping windows on screen edges"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:31
msgid ""
"If enabled, dropping windows on vertical screen edges maximizes them "
"vertically and resizes them horizontally to cover half of the available "
"area. Dropping windows on the top screen edge maximizes them completely."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:40
msgid "Workspaces are managed dynamically"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:41
msgid ""
"Determines whether workspaces are managed dynamically or whether there's a "
"static number of workspaces (determined by the num-workspaces key in org."
"gnome.desktop.wm.preferences)."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:50
msgid "Workspaces only on primary"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:51
msgid ""
"Determines whether workspace switching should happen for windows on all "
"monitors or only for windows on the primary monitor."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:59
msgid "No tab popup"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:60
msgid ""
"Determines whether the use of popup and highlight frame should be disabled "
"for window cycling."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:68
msgid "Delay focus changes until the pointer stops moving"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:69
msgid ""
"If set to true, and the focus mode is either \"sloppy\" or \"mouse\" then "
"the focus will not be changed immediately when entering a window, but only "
"after the pointer stops moving."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:79
msgid "Draggable border width"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:80
msgid ""
"The amount of total draggable borders. If the theme's visible borders are "
"not enough, invisible borders will be added to meet this value."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:89
msgid "Auto maximize nearly monitor sized windows"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:90
msgid ""
"If enabled, new windows that are initially the size of the monitor "
"automatically get maximized."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:98
msgid "Place new windows in the center"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:99
msgid ""
"When true, the new windows will always be put in the center of the active "
"screen of the monitor."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:120
msgid "Select window from tab popup"
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:125
msgid "Cancel tab popup"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:6
msgid "Switch to VT 1"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:10
msgid "Switch to VT 2"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:14
msgid "Switch to VT 3"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:18
msgid "Switch to VT 4"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:22
msgid "Switch to VT 5"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:26
msgid "Switch to VT 6"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:30
msgid "Switch to VT 7"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:34
msgid "Switch to VT 8"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:38
msgid "Switch to VT 9"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:42
msgid "Switch to VT 10"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:46
msgid "Switch to VT 11"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:50
msgid "Switch to VT 12"
msgstr ""
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:1913 #: src/backends/meta-input-settings.c:2190
#| msgid "Switch system controls"
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Gearr leum gu monatair eile" msgstr "Gearr leum gu monatair eile"
#: src/backends/meta-input-settings.c:1915 #: src/backends/meta-input-settings.c:2192
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Seall a' chobhair air an sgrìn" msgstr "Seall a chobhair air an sgrìn"
#: src/backends/meta-monitor-manager.c:515 #: src/backends/meta-monitor-manager.c:908
msgid "Built-in display" msgid "Built-in display"
msgstr "Uidheam-taisbeanaidh 'na broinn" msgstr "Uidheam-taisbeanaidh na broinn"
#: src/backends/meta-monitor-manager.c:538 #: src/backends/meta-monitor-manager.c:931
msgid "Unknown" msgid "Unknown"
msgstr "Chan eil fhios" msgstr "Chan eil fhios"
#: src/backends/meta-monitor-manager.c:540 #: src/backends/meta-monitor-manager.c:933
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Uidheam-taisbeanaidh nach aithne dhuinn" msgstr "Uidheam-taisbeanaidh nach aithne dhuinn"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:548 #: src/backends/meta-monitor-manager.c:941
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:471 #: src/compositor/compositor.c:479
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display \"%s" "Another compositing manager is already running on screen %i on display “%s”."
"\"."
msgstr "" msgstr ""
#: src/core/bell.c:194 #: src/core/bell.c:194
msgid "Bell event" msgid "Bell event"
msgstr "" msgstr ""
#: src/core/delete.c:127 #: src/core/display.c:608
#, c-format
msgid "Failed to open X Window System display “%s”\n"
msgstr ""
#: src/core/main.c:189
msgid "Disable connection to session manager"
msgstr ""
#: src/core/main.c:195
msgid "Replace the running window manager"
msgstr ""
#: src/core/main.c:201
msgid "Specify session management ID"
msgstr ""
#: src/core/main.c:206
msgid "X Display to use"
msgstr ""
#: src/core/main.c:212
msgid "Initialize session from savefile"
msgstr ""
#: src/core/main.c:218
msgid "Make X calls synchronous"
msgstr ""
#: src/core/main.c:225
msgid "Run as a wayland compositor"
msgstr ""
#: src/core/main.c:231
msgid "Run as a nested compositor"
msgstr ""
#: src/core/main.c:239
msgid "Run as a full display server, rather than nested"
msgstr ""
#. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
msgid "“%s” is not responding." msgid "“%s” is not responding."
msgstr "" msgstr ""
#: src/core/delete.c:129 #: src/core/meta-close-dialog-default.c:149
msgid "Application is not responding." msgid "Application is not responding."
msgstr "" msgstr ""
#: src/core/delete.c:134 #: src/core/meta-close-dialog-default.c:154
msgid "" msgid ""
"You may choose to wait a short while for it to continue or force the " "You may choose to wait a short while for it to continue or force the "
"application to quit entirely." "application to quit entirely."
msgstr "" msgstr ""
#: src/core/delete.c:141 #: src/core/meta-close-dialog-default.c:161
msgid "_Wait"
msgstr "_Fuirich"
#: src/core/delete.c:141
msgid "_Force Quit" msgid "_Force Quit"
msgstr "Sparr _fàgail air" msgstr "Sparr _fàgail air"
#: src/core/display.c:590 #: src/core/meta-close-dialog-default.c:161
#, c-format msgid "_Wait"
msgid "Failed to open X Window System display '%s'\n" msgstr "_Fuirich"
msgstr ""
#: src/core/main.c:182
msgid "Disable connection to session manager"
msgstr ""
#: src/core/main.c:188
msgid "Replace the running window manager"
msgstr ""
#: src/core/main.c:194
msgid "Specify session management ID"
msgstr ""
#: src/core/main.c:199
msgid "X Display to use"
msgstr ""
#: src/core/main.c:205
msgid "Initialize session from savefile"
msgstr ""
#: src/core/main.c:211
msgid "Make X calls synchronous"
msgstr ""
#: src/core/main.c:218
msgid "Run as a wayland compositor"
msgstr ""
#: src/core/main.c:224
msgid "Run as a nested compositor"
msgstr ""
#: src/core/main.c:232
msgid "Run as a full display server, rather than nested"
msgstr ""
#: src/core/mutter.c:39 #: src/core/mutter.c:39
#, c-format #, c-format
msgid "" msgid ""
"mutter %s\n" "mutter %s\n"
"Copyright (C) 2001-%d Havoc Pennington, Red Hat, Inc., and others\n" "Copyright © 2001-%d Havoc Pennington, Red Hat, Inc., and others\n"
"This is free software; see the source for copying conditions.\n" "This is free software; see the source for copying conditions.\n"
"There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A " "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A "
"PARTICULAR PURPOSE.\n" "PARTICULAR PURPOSE.\n"
@@ -558,34 +413,34 @@ msgstr ""
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Rum-obrach %d" msgstr "Rum-obrach %d"
#: src/core/screen.c:521 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display \"%s\" already has a window manager; try using the --replace option " "Display “%s” already has a window manager; try using the --replace option to "
"to replace the current window manager." "replace the current window manager."
msgstr "" msgstr ""
#: src/core/screen.c:606 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display '%s' is invalid\n" msgid "Screen %d on display %s is invalid\n"
msgstr "" msgstr ""
#: src/core/util.c:120 #: src/core/util.c:120
msgid "Mutter was compiled without support for verbose mode\n" msgid "Mutter was compiled without support for verbose mode\n"
msgstr "" msgstr ""
#: src/wayland/meta-wayland-tablet-pad.c:595 #: src/wayland/meta-wayland-tablet-pad.c:563
#, c-format #, c-format
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Suidse nam modh: Modh %d" msgstr "Suidse nam modh: Modh %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1815
msgid "" msgid ""
"These windows do not support &quot;save current setup&quot; and will have to " "These windows do not support save current setup and will have to be "
"be restarted manually next time you log in." "restarted manually next time you log in."
msgstr "" msgstr ""
#: src/x11/window-props.c:548 #: src/x11/window-props.c:559
#, c-format #, c-format
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (air %s)" msgstr "%s (air %s)"

236
po/gl.po
View File

@@ -9,22 +9,21 @@
# Mancomún - Centro de Referencia e Servizos de Software Libre <g11n@mancomun.org>, 2009. # Mancomún - Centro de Referencia e Servizos de Software Libre <g11n@mancomun.org>, 2009.
# Fran Diéguez <frandieguez@gnome.org>, 2009, 2010, 2011, 2012. # Fran Diéguez <frandieguez@gnome.org>, 2009, 2010, 2011, 2012.
# Leandro Regueiro <leandro.regueiro@gmail.com>, 2012. # Leandro Regueiro <leandro.regueiro@gmail.com>, 2012.
# Fran Dieguez <frandieguez@gnome.org>, 2012, 2013, 2014, 2015, 2016, 2017. # Fran Dieguez <frandieguez@gnome.org>, 2012, 2013, 2014, 2015, 2016, 2017, 2018.
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: gl\n" "Project-Id-Version: gl\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?product=mutter" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-03-03 13:19+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-05-07 19:37+0200\n"
"PO-Revision-Date: 2017-08-30 22:29+0200\n" "Last-Translator: marcos <marcoslansgarza@gmail.com>\n"
"Last-Translator: Fran Dieguez <frandieguez@gnome.org>\n"
"Language-Team: Galician\n" "Language-Team: Galician\n"
"Language: gl\n" "Language: gl\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n" "Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Generator: Virtaal 0.7.1\n" "X-Generator: Poedit 2.0.6\n"
"X-Project-Style: gnome\n" "X-Project-Style: gnome\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
@@ -52,134 +51,118 @@ msgid "Move window to last workspace"
msgstr "Mover xanela ao último espazo de traballo" msgstr "Mover xanela ao último espazo de traballo"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Mover xanela un espazo de traballo cara á esquerda"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Mover xanela un espazo de traballo cara á dereita"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Mover xanela un espazo de traballo cara a arriba" msgstr "Mover xanela un espazo de traballo cara a arriba"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Mover xanela un espazo de traballo cara a abaixo" msgstr "Mover xanela un espazo de traballo cara a abaixo"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Mover xanela un monitor á esquerda" msgstr "Mover xanela un monitor á esquerda"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Mover xanela un monitor á dereita" msgstr "Mover xanela un monitor á dereita"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Mover xanela un monitor arriba" msgstr "Mover xanela un monitor arriba"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Mover xanela un espazo de traballo abaixo" msgstr "Mover xanela un espazo de traballo abaixo"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Cambiar entre aplicativos" msgstr "Cambiar entre aplicativos"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Cambiar ao aplicativo aplicativos" msgstr "Cambiar ao aplicativo aplicativos"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Cambiar xanelas" msgstr "Cambiar xanelas"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Cambiar á xanela anterior" msgstr "Cambiar á xanela anterior"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Cambiar entre as xanelas dun aplicativo" msgstr "Cambiar entre as xanelas dun aplicativo"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Cambia á xanela anterior dun aplicativo" msgstr "Cambia á xanela anterior dun aplicativo"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Cambiar entre os controles do sistema" msgstr "Cambiar entre os controis do sistema"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Cambia ao control do sistema anterior" msgstr "Cambia ao control do sistema anterior"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Cambiar xanelas directamente" msgstr "Cambiar xanelas directamente"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Cambia directamente á xanela anterior" msgstr "Cambia directamente á xanela anterior"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Cambiar entre as xanelas dun aplicativo directamente" msgstr "Cambiar entre as xanelas dun aplicativo directamente"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Cambia directamente á xanela anterior do aplicativo" msgstr "Cambia directamente á xanela anterior do aplicativo"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Cambiar entre os controles do sistema directamente" msgstr "Cambiar entre os controis do sistema directamente"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Cambiar directamente ao control do sistema anterior" msgstr "Cambiar directamente ao control do sistema anterior"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Ocultar todas as xanelas normais" msgstr "Ocultar todas as xanelas normais"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Cambiar ao espazo de traballo 1" msgstr "Cambiar ao espazo de traballo 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Cambiar ao espazo de traballo 2" msgstr "Cambiar ao espazo de traballo 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Cambiar ao espazo de traballo 3" msgstr "Cambiar ao espazo de traballo 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Cambiar ao espazo de traballo 4" msgstr "Cambiar ao espazo de traballo 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Cambiar ao último espazo de traballo" msgstr "Cambiar ao último espazo de traballo"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Mover ao espazo da esquerda"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Mover ao espazo da dereita"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Mover ao espazo de arriba" msgstr "Mover ao espazo de arriba"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Mover ao espazo de traballo de abaixo" msgstr "Mover ao espazo de traballo de abaixo"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sistema" msgstr "Sistema"
@@ -191,6 +174,10 @@ msgstr "Mostrar o diálogo de executar orde"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Mostrar a vista xeral de actividades" msgstr "Mostrar a vista xeral de actividades"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Restaurar os atallos de teclado"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Xanelas" msgstr "Xanelas"
@@ -216,54 +203,50 @@ msgid "Restore window"
msgstr "Restaurar xanela" msgstr "Restaurar xanela"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Trocar o estado ensombrecido"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Pechar xanela" msgstr "Pechar xanela"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Ocultar xanela" msgstr "Ocultar xanela"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Mover xanela" msgstr "Mover xanela"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Redimensionar xanela" msgstr "Redimensionar xanela"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Trocar que a xanela apareza en tódolos espazos de traballo ou nun" msgstr "Trocar que a xanela apareza en tódolos espazos de traballo ou nun"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Elevar a xanela se está cuberta por outra, en caso contrario baixala" msgstr "Elevar a xanela se está cuberta por outra, en caso contrario baixala"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Subir a xanela por enriba doutras xanelas" msgstr "Subir a xanela por enriba doutras xanelas"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Baixar xanela debaixo doutras xanelas" msgstr "Baixar xanela debaixo doutras xanelas"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Maximizar xanela verticalmente" msgstr "Maximizar xanela verticalmente"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Maximizar xanela horizontalmente" msgstr "Maximizar xanela horizontalmente"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Dividir vista á esquerda" msgstr "Dividir vista á esquerda"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Dividir vista á dereita" msgstr "Dividir vista á dereita"
@@ -411,16 +394,6 @@ msgid "Enable experimental features"
msgstr "Activar as características experimentais" msgstr "Activar as características experimentais"
#: data/org.gnome.mutter.gschema.xml.in:108 #: data/org.gnome.mutter.gschema.xml.in:108
#| msgid ""
#| "To enable experimental features, add the feature keyword to the list. "
#| "Whether the feature requires restarting the compositor depends on the "
#| "given feature. Any experimental feature is not required to still be "
#| "available, or configurable. Dont expect adding anything in this setting "
#| "to be future proof. Currently possible keywords: • “scale-monitor-"
#| "framebuffer” — makes mutter default to layout logical monitors in a "
#| "logical pixel coordinate space, while scaling monitor framebuffers "
#| "instead of window content, to manage HiDPI monitors. Does not require a "
#| "restart."
msgid "" msgid ""
"To enable experimental features, add the feature keyword to the list. " "To enable experimental features, add the feature keyword to the list. "
"Whether the feature requires restarting the compositor depends on the given " "Whether the feature requires restarting the compositor depends on the given "
@@ -516,10 +489,56 @@ msgstr "Cambiar á VT 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Reactivar os atallos" msgstr "Reactivar os atallos"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Permitir capturas con Xwayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Permitir que se teña en conta a captura do teclado desde aplicativos X11 "
"executándose en Xwayland. Para que a captura X11 se teña en conta baixo "
"Wayland, o cliente debe enviar un ClientMessage de X11 específico á xanela "
"principal ou estar entre os aplicatios na lista blanca da chave «xwayland-"
"grab-access-rules»."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Aplicaciones de Xwayland que poden capturar o teclado"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Lista de nomes de recursos ou clases de recursos para as xanelas X11 tanto "
"permitidas como non permitidas para a captura do teclado en X11 baixo "
"Xwayland. O nome do recurso ou a clase do recurso da xanela X11 dada pode "
"obterse usando a orde «xprop WM_CLASS». Admítense os comodíns «*» e os "
"jokers \"?\" nos valores. Os valores comezando con «!» incluiranse na lista "
"negra, que ten precedencia sobre a lista branca, para revogar aplicativos "
"desde a lista por omisión do sistema. A lista por omisión do sitema inclúe "
"os seguintes aplicativos “@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Os usuarios "
"poden romper unha captura existente usando un atallo de teclado específico "
"definido na chave de atallo «restore-shortcuts»."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2325
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Modo conmutador (Grupo %d)" msgstr "Modo conmutador (Grupo %d)"
@@ -527,37 +546,37 @@ msgstr "Modo conmutador (Grupo %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2348
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Cambiar monitor" msgstr "Cambiar monitor"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2350
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Mostrar axuda en pantalla" msgstr "Mostrar axuda en pantalla"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Pantalla embebida" msgstr "Pantalla embebida"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Descoñecido" msgstr "Descoñecido"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Pantalla descoñecida" msgstr "Pantalla descoñecida"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -574,42 +593,46 @@ msgstr "Evento de campá"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Produciuse un erro ao abrir a visualización do X Window System «%s»\n" msgstr "Produciuse un erro ao abrir a visualización do X Window System «%s»\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Desactivar a conexión ao xestor de sesión" msgstr "Desactivar a conexión ao xestor de sesión"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Substituír o xestor de xanelas en execución" msgstr "Substituír o xestor de xanelas en execución"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Especificar o ID de xestión de sesión" msgstr "Especificar o ID de xestión de sesión"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Pantalla X que se vai usar" msgstr "Pantalla X que se vai usar"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Inicializar sesión desde o ficheiro de salvagarda" msgstr "Inicializar sesión desde o ficheiro de salvagarda"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Facer que as chamadas a X sexan sincrónicas" msgstr "Facer que as chamadas a X sexan sincrónicas"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Executar como compositor de wayland" msgstr "Executar como compositor de wayland"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Executar como compositor anidado" msgstr "Executar como compositor anidado"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Executar como un servidor de pantalla completo, fronte a un aniñado" msgstr "Executar como un servidor de pantalla completo, fronte a un aniñado"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Executar coa infraestructura de X11"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -664,7 +687,7 @@ msgstr "Engadido de mutter que usar"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Espazo de traballo %d" msgstr "Espazo de traballo %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -673,7 +696,7 @@ msgstr ""
"A pantalla «%s» ten xa un xestor de xanelas, tente usar a opción --replace " "A pantalla «%s» ten xa un xestor de xanelas, tente usar a opción --replace "
"para substituír o xestor de xanelas." "para substituír o xestor de xanelas."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "A pantalla %d na visualización «%s» non é válida\n" msgstr "A pantalla %d na visualización «%s» non é válida\n"
@@ -682,12 +705,12 @@ msgstr "A pantalla %d na visualización «%s» non é válida\n"
msgid "Mutter was compiled without support for verbose mode\n" msgid "Mutter was compiled without support for verbose mode\n"
msgstr "Mutter foi compilado sen compatibilidade para o modo detallado\n" msgstr "Mutter foi compilado sen compatibilidade para o modo detallado\n"
#: src/wayland/meta-wayland-tablet-pad.c:563 #: src/wayland/meta-wayland-tablet-pad.c:567
#, c-format #, c-format
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Modo conmutador: Modo %d" msgstr "Modo conmutador: Modo %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -700,6 +723,21 @@ msgstr ""
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (en %s)" msgstr "%s (en %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Mover xanela un espazo de traballo cara á esquerda"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Mover xanela un espazo de traballo cara á dereita"
#~ msgid "Move to workspace left"
#~ msgstr "Mover ao espazo da esquerda"
#~ msgid "Move to workspace right"
#~ msgstr "Mover ao espazo da dereita"
#~ msgid "Toggle shaded state"
#~ msgstr "Trocar o estado ensombrecido"
#~ msgid "background texture could not be created from file" #~ msgid "background texture could not be created from file"
#~ msgstr "a textura do fondo non puido crearse desde o ficheiro" #~ msgstr "a textura do fondo non puido crearse desde o ficheiro"

133
po/he.po
View File

@@ -11,8 +11,8 @@ msgstr ""
"Project-Id-Version: metacity.HEAD.he\n" "Project-Id-Version: metacity.HEAD.he\n"
"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?"
"product=mutter&keywords=I18N+L10N&component=general\n" "product=mutter&keywords=I18N+L10N&component=general\n"
"POT-Creation-Date: 2017-03-30 18:41+0300\n" "POT-Creation-Date: 2017-11-26 17:12+0200\n"
"PO-Revision-Date: 2017-03-30 18:46+0300\n" "PO-Revision-Date: 2017-11-26 17:14+0200\n"
"Last-Translator: Yosef Or Boczko <yoseforb@gmail.com>\n" "Last-Translator: Yosef Or Boczko <yoseforb@gmail.com>\n"
"Language-Team: עברית <>\n" "Language-Team: עברית <>\n"
"Language: he\n" "Language: he\n"
@@ -174,7 +174,7 @@ msgstr "העברה למרחב העבודה שמלמעלה"
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "העברה למרחב העבודה שמלמטה" msgstr "העברה למרחב העבודה שמלמטה"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "מערכת" msgstr "מערכת"
@@ -186,6 +186,10 @@ msgstr "הצגת החלונית להרצת פקודה"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "הצגת סקירת הפעילויות" msgstr "הצגת סקירת הפעילויות"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "שחזור צירופי מקשים"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "חלונות" msgstr "חלונות"
@@ -271,7 +275,6 @@ msgid "Modifier to use for extended window management operations"
msgstr "Modifier to use for extended window management operations" msgstr "Modifier to use for extended window management operations"
#: data/org.gnome.mutter.gschema.xml.in:8 #: data/org.gnome.mutter.gschema.xml.in:8
#,
msgid "" msgid ""
"This key will initiate the “overlay”, which is a combination window overview " "This key will initiate the “overlay”, which is a combination window overview "
"and application launching system. The default is intended to be the “Windows " "and application launching system. The default is intended to be the “Windows "
@@ -316,7 +319,6 @@ msgid "Workspaces are managed dynamically"
msgstr "Workspaces are managed dynamically" msgstr "Workspaces are managed dynamically"
#: data/org.gnome.mutter.gschema.xml.in:41 #: data/org.gnome.mutter.gschema.xml.in:41
#,
msgid "" msgid ""
"Determines whether workspaces are managed dynamically or whether theres a " "Determines whether workspaces are managed dynamically or whether theres a "
"static number of workspaces (determined by the num-workspaces key in org." "static number of workspaces (determined by the num-workspaces key in org."
@@ -355,7 +357,6 @@ msgid "Delay focus changes until the pointer stops moving"
msgstr "Delay focus changes until the pointer stops moving" msgstr "Delay focus changes until the pointer stops moving"
#: data/org.gnome.mutter.gschema.xml.in:69 #: data/org.gnome.mutter.gschema.xml.in:69
#,
msgid "" msgid ""
"If set to true, and the focus mode is either “sloppy” or “mouse” then the " "If set to true, and the focus mode is either “sloppy” or “mouse” then the "
"focus will not be changed immediately when entering a window, but only after " "focus will not be changed immediately when entering a window, but only after "
@@ -401,14 +402,52 @@ msgstr ""
"When true, the new windows will always be put in the center of the active " "When true, the new windows will always be put in the center of the active "
"screen of the monitor." "screen of the monitor."
#: data/org.gnome.mutter.gschema.xml.in:120 #: data/org.gnome.mutter.gschema.xml.in:107
msgid "Enable experimental features"
msgstr "Enable experimental features"
#: data/org.gnome.mutter.gschema.xml.in:108
msgid ""
"To enable experimental features, add the feature keyword to the list. "
"Whether the feature requires restarting the compositor depends on the given "
"feature. Any experimental feature is not required to still be available, or "
"configurable. Dont expect adding anything in this setting to be future "
"proof. Currently possible keywords: • “scale-monitor-framebuffer” — makes "
"mutter default to layout logical monitors in a logical pixel coordinate "
"space, while scaling monitor framebuffers instead of window content, to "
"manage HiDPI monitors. Does not require a restart. • “remote-desktop” — "
"enables remote desktop support. To support remote desktop with screen "
"sharing, “screen-cast” must also be enabled. • “screen-cast” — enables "
"screen cast support."
msgstr ""
"To enable experimental features, add the feature keyword to the list. "
"Whether the feature requires restarting the compositor depends on the given "
"feature. Any experimental feature is not required to still be available, or "
"configurable. Dont expect adding anything in this setting to be future "
"proof. Currently possible keywords: • “scale-monitor-framebuffer” — makes "
"mutter default to layout logical monitors in a logical pixel coordinate "
"space, while scaling monitor framebuffers instead of window content, to "
"manage HiDPI monitors. Does not require a restart. • “remote-desktop” — "
"enables remote desktop support. To support remote desktop with screen "
"sharing, “screen-cast” must also be enabled. • “screen-cast” — enables "
"screen cast support."
#: data/org.gnome.mutter.gschema.xml.in:145
msgid "Select window from tab popup" msgid "Select window from tab popup"
msgstr "Select window from tab popup" msgstr "Select window from tab popup"
#: data/org.gnome.mutter.gschema.xml.in:125 #: data/org.gnome.mutter.gschema.xml.in:150
msgid "Cancel tab popup" msgid "Cancel tab popup"
msgstr "Cancel tab popup" msgstr "Cancel tab popup"
#: data/org.gnome.mutter.gschema.xml.in:155
msgid "Switch monitor configurations"
msgstr "החלפה בין תצורות צגים"
#: data/org.gnome.mutter.gschema.xml.in:160
msgid "Rotates the built-in monitor configuration"
msgstr "Rotates the built-in monitor configuration"
#: data/org.gnome.mutter.wayland.gschema.xml.in:6 #: data/org.gnome.mutter.wayland.gschema.xml.in:6
msgid "Switch to VT 1" msgid "Switch to VT 1"
msgstr "מעבר ל־VT 1" msgstr "מעבר ל־VT 1"
@@ -457,10 +496,14 @@ msgstr "מעבר ל־VT 11"
msgid "Switch to VT 12" msgid "Switch to VT 12"
msgstr "מעבר ל־VT 12" msgstr "מעבר ל־VT 12"
#: data/org.gnome.mutter.wayland.gschema.xml.in:54
msgid "Re-enable shortcuts"
msgstr "לאפשר מחדש צירופי מקשים"
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:1848 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "מצב העברה (קבוצה %d)" msgstr "מצב העברה (קבוצה %d)"
@@ -468,37 +511,37 @@ msgstr "מצב העברה (קבוצה %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:1870 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "החלפה בין צגים" msgstr "החלפה בין צגים"
#: src/backends/meta-input-settings.c:1872 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "הצגת עזרה על המסך" msgstr "הצגת עזרה על המסך"
#: src/backends/meta-monitor-manager.c:630 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "תצוגה מובנית" msgstr "תצוגה מובנית"
#: src/backends/meta-monitor-manager.c:653 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "לא ידוע" msgstr "לא ידוע"
#: src/backends/meta-monitor-manager.c:655 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "תצוגה לא ידועה" msgstr "תצוגה לא ידועה"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:663 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:474 #: src/compositor/compositor.c:479
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -508,31 +551,6 @@ msgstr "מנהל תצוגת חלונות אחר כבר פועל במסך %i בת
msgid "Bell event" msgid "Bell event"
msgstr "אירוע פעמון" msgstr "אירוע פעמון"
#. Translators: %s is a window title
#: src/core/delete.c:127
#, c-format
msgid "“%s” is not responding."
msgstr "„%s“ אינו מגיב."
#: src/core/delete.c:129
msgid "Application is not responding."
msgstr "היישום אינו מגיב."
#: src/core/delete.c:134
msgid ""
"You may choose to wait a short while for it to continue or force the "
"application to quit entirely."
msgstr ""
"באפשרותך להמתין זמן קצר ולתת ליישום להמשיך או להכריח את היישום להסתיים."
#: src/core/delete.c:141
msgid "_Force Quit"
msgstr "_אילוץ סגירה"
#: src/core/delete.c:141
msgid "_Wait"
msgstr "ה_מתנה"
#: src/core/display.c:608 #: src/core/display.c:608
#, c-format #, c-format
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
@@ -574,6 +592,31 @@ msgstr "Run as a nested compositor"
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Run as a full display server, rather than nested" msgstr "Run as a full display server, rather than nested"
#. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147
#, c-format
msgid "“%s” is not responding."
msgstr "„%s“ אינו מגיב."
#: src/core/meta-close-dialog-default.c:149
msgid "Application is not responding."
msgstr "היישום אינו מגיב."
#: src/core/meta-close-dialog-default.c:154
msgid ""
"You may choose to wait a short while for it to continue or force the "
"application to quit entirely."
msgstr ""
"באפשרותך להמתין זמן קצר ולתת ליישום להמשיך או להכריח את היישום להסתיים."
#: src/core/meta-close-dialog-default.c:161
msgid "_Force Quit"
msgstr "_אילוץ סגירה"
#: src/core/meta-close-dialog-default.c:161
msgid "_Wait"
msgstr "ה_מתנה"
#: src/core/mutter.c:39 #: src/core/mutter.c:39
#, c-format #, c-format
msgid "" msgid ""
@@ -601,7 +644,7 @@ msgstr "תוסף ה־mutter לשימוש"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "מרחב עבודה %d" msgstr "מרחב עבודה %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -610,7 +653,7 @@ msgstr ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
"replace the current window manager." "replace the current window manager."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Screen %d on display “%s” is invalid\n" msgstr "Screen %d on display “%s” is invalid\n"
@@ -629,8 +672,8 @@ msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
msgstr "" msgstr ""
"חלונות אלו אינם תומכים ב„שמירת ההגדרות הנוכחיות”, ויהיה צורך " "חלונות אלו אינם תומכים ב„שמירת ההגדרות הנוכחיות”, ויהיה צורך באתחול ידני "
אתחול ידני בכניסה הבאה שלך." "בכניסה הבאה שלך."
#: src/x11/window-props.c:559 #: src/x11/window-props.c:559
#, c-format #, c-format

215
po/hr.po
View File

@@ -4,10 +4,9 @@
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: metacity 0\n" "Project-Id-Version: metacity 0\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-06 04:14+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-02-17 16:00+0100\n"
"PO-Revision-Date: 2017-09-22 20:51+0200\n"
"Last-Translator: gogo <trebelnik2@gmail.com>\n" "Last-Translator: gogo <trebelnik2@gmail.com>\n"
"Language-Team: Croatian <lokalizacija@linux.hr>\n" "Language-Team: Croatian <lokalizacija@linux.hr>\n"
"Language: hr\n" "Language: hr\n"
@@ -17,7 +16,7 @@ msgstr ""
"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" "Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
"X-Launchpad-Export-Date: 2008-05-28 13:28+0000\n" "X-Launchpad-Export-Date: 2008-05-28 13:28+0000\n"
"X-Generator: Poedit 2.0.3\n" "X-Generator: Poedit 2.0.6\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
@@ -44,134 +43,118 @@ msgid "Move window to last workspace"
msgstr "Premjesti prozor posljednji radni prostor" msgstr "Premjesti prozor posljednji radni prostor"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Premjesti prozor jedan radni prostor nalijevo"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Premjesti prozor jedan radni prostor udesno"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Premjesti prozor jedan radni prostor gore" msgstr "Premjesti prozor jedan radni prostor gore"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Premjesti prozor jedan radni prostor dolje" msgstr "Premjesti prozor jedan radni prostor dolje"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Premjesti prozor jedan zaslon nalijevo" msgstr "Premjesti prozor jedan zaslon nalijevo"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Premjesti prozor jedan zaslon udesno" msgstr "Premjesti prozor jedan zaslon udesno"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Premjesti prozor jedan zaslon gore" msgstr "Premjesti prozor jedan zaslon gore"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Premjesti prozor jedan zaslon dolje" msgstr "Premjesti prozor jedan zaslon dolje"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Prebacivanje aplikacija" msgstr "Prebacivanje aplikacija"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Prebaci na prijašnju aplikaciju" msgstr "Prebaci na prijašnju aplikaciju"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Prebacivanje prozora" msgstr "Prebacivanje prozora"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Prebaci na prijašnji prozor" msgstr "Prebaci na prijašnji prozor"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Prebacivanje prozora aplikacija" msgstr "Prebacivanje prozora aplikacija"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Prebaci na prijašnji prozor aplikacije" msgstr "Prebaci na prijašnji prozor aplikacije"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Prebacivanje upravljanja sustavom" msgstr "Prebacivanje upravljanja sustavom"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Prebaci na prijašnje upravljanje sustavom" msgstr "Prebaci na prijašnje upravljanje sustavom"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Prebacivanje izravno na prozor" msgstr "Prebacivanje izravno na prozor"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Prebaci izravno na prijašnji prozor" msgstr "Prebaci izravno na prijašnji prozor"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Prebacivanje prozora aplikacije izravno" msgstr "Prebacivanje prozora aplikacije izravno"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Prebaci izravno na prijašnji prozor aplikacije" msgstr "Prebaci izravno na prijašnji prozor aplikacije"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Prebacivanje upravljanja sustavom izravno" msgstr "Prebacivanje upravljanja sustavom izravno"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Prebaci izravno na prijašnje upravljanje sustavom" msgstr "Prebaci izravno na prijašnje upravljanje sustavom"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Sakrij sve normalne prozore" msgstr "Sakrij sve normalne prozore"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Prebaci se na radni prostor 1" msgstr "Prebaci se na radni prostor 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Prebaci se na radni prostor 2" msgstr "Prebaci se na radni prostor 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Prebaci se na radni prostor 3" msgstr "Prebaci se na radni prostor 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Prebaci se na radni prostor 4" msgstr "Prebaci se na radni prostor 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Prebaci na prijašnji radni prostor" msgstr "Prebaci na prijašnji radni prostor"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Premjesti na lijevi radni prostor"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Premjesti na desni radni prostor"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Premjesti na gornji radni prostor" msgstr "Premjesti na gornji radni prostor"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Premjesti na donji radni prostor" msgstr "Premjesti na donji radni prostor"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sustav" msgstr "Sustav"
@@ -183,6 +166,10 @@ msgstr "Prikaži dijalog pokretanja naredbe"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Prikaži pregled aktivnosti" msgstr "Prikaži pregled aktivnosti"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Vrati izvorne prečace tipkovnice"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Prozori" msgstr "Prozori"
@@ -208,54 +195,50 @@ msgid "Restore window"
msgstr "Vrati prozor" msgstr "Vrati prozor"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Uklj/Isklj stanje zasjenjenosti"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Zatvori prozor" msgstr "Zatvori prozor"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Sakrij prozor" msgstr "Sakrij prozor"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Premjesti prozor" msgstr "Premjesti prozor"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Promijeni veličinu prozora" msgstr "Promijeni veličinu prozora"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Uklj/Isklj prozor na svim radnim prostorima" msgstr "Uklj/Isklj prozor na svim radnim prostorima"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Podigni prekriven prozor, u suprotnome smanji" msgstr "Podigni prekriven prozor, u suprotnome smanji"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Podigni prozor iznad ostalih prozora" msgstr "Podigni prozor iznad ostalih prozora"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Spusti prozor ispod ostalih prozora" msgstr "Spusti prozor ispod ostalih prozora"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Uvećaj prozor okomito" msgstr "Uvećaj prozor okomito"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Uvećaj prozor vodoravno" msgstr "Uvećaj prozor vodoravno"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Podijeli pogled ulijevo" msgstr "Podijeli pogled ulijevo"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Podijeli pogled udesno" msgstr "Podijeli pogled udesno"
@@ -493,10 +476,55 @@ msgstr "Prebaci na VT 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Ponovno omogući prečace" msgstr "Ponovno omogući prečace"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Dopusti hvatanje sa Xwaylandom"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Dopusti hvatanje tipkovnicom aplikacije izdane za X11 pokrenute u Xwaylandu "
"kako bi se obuhvatile u računu. Kako bi X11 hvatanje bilo obuhvaćeno računom "
"u Waylandu, klijent mora poslati ili određenu X11 poruku klijenta u "
"korijenski prozor ili mora biti naveden među aplikacijama dopuštenim u "
"ključu “xwayland-grab-access-rules”."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Xwayland aplikacije dopuštene za izdavanje hvatanja tipkovnice"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Popis naziva ili razreda resursa X11 prozora koji dopuštaju ili nedopuštaju "
"izdavanje X11 hvatanja tipkovnice u Xwaylandu. Popis naziva ili razreda "
"resursa danog X11 prozora može se omogućiti naredbom “xprop WM_CLASS”. "
"Zvjezdice “*” i upitnici “?” u vrijednostima su podržani. Vrijednosti koje "
"počinju sa “!” nisu dopuštene, a imaju prednost nad dopuštenim, kako bi "
"opozvali aplikaciju iz zadanog popisa sustavom. Zadani popis sustava "
"uključuje sljedeće aplikacije: “@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” "
"Korisnici mogu prekinuti postojeće hvatanje koristeći određeni prečac "
"tipkovnice određen ključem prečaca tipkovnice “restore-shortcuts”."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Način prebacivanja (Grupa %d)" msgstr "Način prebacivanja (Grupa %d)"
@@ -504,37 +532,37 @@ msgstr "Način prebacivanja (Grupa %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Prebaci zaslon" msgstr "Prebaci zaslon"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Prikaži zaslonsku pomoć" msgstr "Prikaži zaslonsku pomoć"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Ugrađeni zaslon" msgstr "Ugrađeni zaslon"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Nepoznat" msgstr "Nepoznat"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Nepoznat zaslon" msgstr "Nepoznat zaslon"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -550,42 +578,46 @@ msgstr "Događaj zvona"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Neuspjelo otvaranje sustava prikaza X prozora \"%s\"\n" msgstr "Neuspjelo otvaranje sustava prikaza X prozora \"%s\"\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Onemogući povezivanje sa upraviteljem sesija" msgstr "Onemogući povezivanje sa upraviteljem sesija"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Zamijeni pokrenutoga upravitelja porozora" msgstr "Zamijeni pokrenutoga upravitelja porozora"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Odredite ID upravljanja sesijama" msgstr "Odredite ID upravljanja sesijama"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "X Prikaz za korištenje" msgstr "X Prikaz za korištenje"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Pokreni sesiju iz spremljene datoteke" msgstr "Pokreni sesiju iz spremljene datoteke"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Napravi X pozive usklađenim" msgstr "Napravi X pozive usklađenim"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Pokreni wayland kompozitor" msgstr "Pokreni wayland kompozitor"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Pokreni kao ugrađeni kompozitor" msgstr "Pokreni kao ugrađeni kompozitor"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Pokreni kao potpuni poslužitelj zaslona, radije nego ugrađeni" msgstr "Pokreni kao potpuni poslužitelj zaslona, radije nego ugrađeni"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Pokreni s X11 pozadinskim programom"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -640,7 +672,7 @@ msgstr "Mutter priključak koji se koristi"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Radni prostor %d" msgstr "Radni prostor %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -649,7 +681,7 @@ msgstr ""
"Prikaz \"%s\" već ima upravitelja prozora; pokušajte koristiti --replace " "Prikaz \"%s\" već ima upravitelja prozora; pokušajte koristiti --replace "
"mogućnost za zamjenu trenutnog upravitelja prozora." "mogućnost za zamjenu trenutnog upravitelja prozora."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Zaslon %d na prikazu '%s' je neispravan\n" msgstr "Zaslon %d na prikazu '%s' je neispravan\n"
@@ -663,7 +695,7 @@ msgstr "Mutter je kompiliran bez podrške za opširan način rada\n"
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Način prebacivanja: Način %d" msgstr "Način prebacivanja: Način %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -676,6 +708,21 @@ msgstr ""
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (na %s)" msgstr "%s (na %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Premjesti prozor jedan radni prostor nalijevo"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Premjesti prozor jedan radni prostor udesno"
#~ msgid "Move to workspace left"
#~ msgstr "Premjesti na lijevi radni prostor"
#~ msgid "Move to workspace right"
#~ msgstr "Premjesti na desni radni prostor"
#~ msgid "Toggle shaded state"
#~ msgstr "Uklj/Isklj stanje zasjenjenosti"
#~ msgid "Desktop" #~ msgid "Desktop"
#~ msgstr "Radna površina" #~ msgstr "Radna površina"

231
po/hu.po
View File

@@ -1,19 +1,18 @@
# Hungarian translation of mutter. # Hungarian translation for mutter.
# Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 Free Software Foundation, Inc. # Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Free Software Foundation, Inc.
# This file is distributed under the same license as the mutter package. # This file is distributed under the same license as the mutter package.
# #
# Andras Timar <timar at gnome dot hu>, 2002, 2003. # Andras Timar <timar at gnome dot hu>, 2002, 2003.
# Gabor Sari <saga at externet dot hu>, 2003. # Gabor Sari <saga at externet dot hu>, 2003.
# Laszlo Dvornik <dvornik at gnome dot hu>, 2004. # Laszlo Dvornik <dvornik at gnome dot hu>, 2004.
# Gabor Kelemen <kelemeng at gnome dot hu>, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013. # Gabor Kelemen <kelemeng at gnome dot hu>, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013.
# Balázs Úr <urbalazs at gmail dot com>, 2013, 2014, 2015, 2016, 2017. # Balázs Úr <urbalazs at gmail dot com>, 2013, 2014, 2015, 2016, 2017, 2018.
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter master\n" "Project-Id-Version: mutter master\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-07 18:39+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-02-23 23:53+0100\n"
"PO-Revision-Date: 2017-09-05 17:35+0200\n"
"Last-Translator: Balázs Úr <urbalazs@gmail.com>\n" "Last-Translator: Balázs Úr <urbalazs@gmail.com>\n"
"Language-Team: Hungarian <gnome-hu-list at gnome dot org>\n" "Language-Team: Hungarian <gnome-hu-list at gnome dot org>\n"
"Language: hu\n" "Language: hu\n"
@@ -48,134 +47,118 @@ msgid "Move window to last workspace"
msgstr "Ablak áthelyezése az utolsó munkaterületre" msgstr "Ablak áthelyezése az utolsó munkaterületre"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Ablak áthelyezése a balra lévő munkaterületre"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Ablak áthelyezése a jobbra lévő munkaterületre"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Ablak áthelyezése egy munkaterülettel feljebb" msgstr "Ablak áthelyezése egy munkaterülettel feljebb"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Ablak áthelyezése egy munkaterülettel lejjebb" msgstr "Ablak áthelyezése egy munkaterülettel lejjebb"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Ablak áthelyezése a balra lévő monitorra" msgstr "Ablak áthelyezése a balra lévő monitorra"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Ablak áthelyezése a jobbra lévő monitorra" msgstr "Ablak áthelyezése a jobbra lévő monitorra"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Ablak áthelyezése egy monitorral feljebb" msgstr "Ablak áthelyezése egy monitorral feljebb"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Ablak áthelyezése egy monitorral lejjebb" msgstr "Ablak áthelyezése egy monitorral lejjebb"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Alkalmazásváltás" msgstr "Alkalmazásváltás"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Váltás az előző alkalmazásra" msgstr "Váltás az előző alkalmazásra"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Ablakváltás" msgstr "Ablakváltás"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Váltás az előző ablakra" msgstr "Váltás az előző ablakra"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Váltás egy alkalmazás ablakai között" msgstr "Váltás egy alkalmazás ablakai között"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Váltás egy alkalmazás előző ablakára" msgstr "Váltás egy alkalmazás előző ablakára"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Váltás a rendszer vezérlői közt" msgstr "Váltás a rendszer vezérlői közt"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Váltás az előző rendszervezérlőre" msgstr "Váltás az előző rendszervezérlőre"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Váltás az ablakok közt közvetlenül" msgstr "Váltás az ablakok közt közvetlenül"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Váltás közvetlenül az előző ablakra" msgstr "Váltás közvetlenül az előző ablakra"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Váltás egy alkalmazás ablakai között közvetlenül" msgstr "Váltás egy alkalmazás ablakai között közvetlenül"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Váltás közvetlenül egy alkalmazás előző ablakára" msgstr "Váltás közvetlenül egy alkalmazás előző ablakára"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Váltás a rendszer vezérlői közt közvetlenül" msgstr "Váltás a rendszer vezérlői közt közvetlenül"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Váltás közvetlenül az előző rendszervezérlőre" msgstr "Váltás közvetlenül az előző rendszervezérlőre"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Minden normál ablak elrejtése" msgstr "Minden normál ablak elrejtése"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Váltás az 1. munkaterületre" msgstr "Váltás az 1. munkaterületre"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Váltás a 2. munkaterületre" msgstr "Váltás a 2. munkaterületre"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Váltás a 3. munkaterületre" msgstr "Váltás a 3. munkaterületre"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Váltás a 4. munkaterületre" msgstr "Váltás a 4. munkaterületre"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Váltás az utolsó munkaterületre" msgstr "Váltás az utolsó munkaterületre"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Áthelyezés a bal oldali munkaterületre"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Áthelyezés a jobb oldali munkaterületre"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Áthelyezés a felső munkaterületre" msgstr "Áthelyezés a felső munkaterületre"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Áthelyezés az alsó munkaterületre" msgstr "Áthelyezés az alsó munkaterületre"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Rendszer" msgstr "Rendszer"
@@ -187,6 +170,10 @@ msgstr "A parancs futtatása ablak megjelenítése"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "A tevékenységek áttekintés megjelenítése" msgstr "A tevékenységek áttekintés megjelenítése"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Gyorsbillentyűk helyreállítása"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Ablakok" msgstr "Ablakok"
@@ -212,54 +199,50 @@ msgid "Restore window"
msgstr "Ablak visszaállítása" msgstr "Ablak visszaállítása"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Felgördített állapot átváltása"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Ablak bezárása" msgstr "Ablak bezárása"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Ablak elrejtése" msgstr "Ablak elrejtése"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Ablak áthelyezése" msgstr "Ablak áthelyezése"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Ablak átméretezése" msgstr "Ablak átméretezése"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Ablak megjelenítése minden munkaterületen vagy csak az egyiken" msgstr "Ablak megjelenítése minden munkaterületen vagy csak az egyiken"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Fedett ablak előtérbe hozása, egyébként háttérbe küldése" msgstr "Fedett ablak előtérbe hozása, egyébként háttérbe küldése"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Ablak más ablakok elé hozása" msgstr "Ablak más ablakok elé hozása"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Ablak más ablakok mögé küldése" msgstr "Ablak más ablakok mögé küldése"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Ablak függőleges maximalizálása" msgstr "Ablak függőleges maximalizálása"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Ablak vízszintes maximalizálása" msgstr "Ablak vízszintes maximalizálása"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Bal oldali felosztás megjelenítése" msgstr "Bal oldali felosztás megjelenítése"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Jobb oldali felosztás megjelenítése" msgstr "Jobb oldali felosztás megjelenítése"
@@ -404,20 +387,6 @@ msgid "Enable experimental features"
msgstr "Kísérleti funkciók engedélyezése" msgstr "Kísérleti funkciók engedélyezése"
#: data/org.gnome.mutter.gschema.xml.in:108 #: data/org.gnome.mutter.gschema.xml.in:108
#| msgid ""
#| "To enable experimental features, add the feature keyword to the list. "
#| "Whether the feature requires restarting the compositor depends on the "
#| "given feature. Any experimental feature is not required to still be "
#| "available, or configurable. Dont expect adding anything in this setting "
#| "to be future proof. Currently possible keywords: • “monitor-config-"
#| "manager” — use the new monitor configuration system, aimed to replace the "
#| "old one. This enables a higher level configuration API to be used by "
#| "configuration applications, as well as the ability to configure per "
#| "logical monitor scale. • “scale-monitor-framebuffer” — makes mutter "
#| "default to layout logical monitors in a logical pixel coordinate space, "
#| "while scaling monitor framebuffers instead of window content, to manage "
#| "HiDPI monitors. Does not require a restart. Also enabling “monitor-config-"
#| "manager” is required for this feature to be enabled."
msgid "" msgid ""
"To enable experimental features, add the feature keyword to the list. " "To enable experimental features, add the feature keyword to the list. "
"Whether the feature requires restarting the compositor depends on the given " "Whether the feature requires restarting the compositor depends on the given "
@@ -432,12 +401,12 @@ msgid ""
"screen cast support." "screen cast support."
msgstr "" msgstr ""
"A kísérleti funkciók engedélyezéséhez adja hozzá a funkció kulcsszavát a " "A kísérleti funkciók engedélyezéséhez adja hozzá a funkció kulcsszavát a "
"listához. A funkció a betűszedő újraindítását igényelheti az adott funkciótól " "listához. A funkció a betűszedő újraindítását igényelheti az adott "
"függően. Egyik kísérleti funkciónál sem szükséges, hogy továbbra is elérhető " "funkciótól függően. Egyik kísérleti funkciónál sem szükséges, hogy továbbra "
"vagy beállítható legyen. Ne várja el azt, hogy ha bármit hozzáad ehhez a " "is elérhető vagy beállítható legyen. Ne várja el azt, hogy ha bármit hozzáad "
"beállításhoz, akkor az a jövőben is elérhető lesz. Jelenleg lehetséges " "ehhez a beállításhoz, akkor az a jövőben is elérhető lesz. Jelenleg "
"kulcsszavak: • „scale-monitor-framebuffer” — alapértelmezetté teszi a mutter " "lehetséges kulcsszavak: • „scale-monitor-framebuffer” — alapértelmezetté "
"programot a logikai monitorok elrendezéséhez egy logikai " "teszi a mutter programot a logikai monitorok elrendezéséhez egy logikai "
"képpontkoordináta-térben, miközben átméretezi a monitor keretpufferét az " "képpontkoordináta-térben, miközben átméretezi a monitor keretpufferét az "
"ablaktartalom helyett azért, hogy kezelje a HiDPI monitorokat. Nem igényel " "ablaktartalom helyett azért, hogy kezelje a HiDPI monitorokat. Nem igényel "
"újraindítást. • „remote-desktop” — engedélyezi a távoli asztal támogatást. A " "újraindítást. • „remote-desktop” — engedélyezi a távoli asztal támogatást. A "
@@ -513,10 +482,56 @@ msgstr "Váltás a 12. VT-re"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Gyorsbillentyűk újraengedélyezése" msgstr "Gyorsbillentyűk újraengedélyezése"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Xwayland megragadások engedélyezése"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Engedélyezi az Xwayland alatti X11 alkalmazások által kért billentyűzet "
"megragadások figyelembe vételét. Ahhoz, hogy Wayland alatt figyelembe "
"legyenek véve az X11 megragadások, a kliensnek vagy küldenie kell egy "
"meghatározott X11 ClientMessage üzenetet a gyökérablaknak, vagy az „xwayland-"
"grab-access-rules” kulcsban megadott fehérlistában kell szerepelnie."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Xwayland alkalmazások, amelyek kérhetnek billentyűzet megragadást"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Felsorolja azokat az X11 ablak erőforrásneveket vagy erőforrásosztályokat, "
"amelyek Xwayland alatt vagy kiadhatnak X11 billentyűzet megragadásokat, vagy "
"sem. A megadott X11 ablak erőforrásneve vagy erőforrásosztálya az „xprop "
"WM_CLASS” paranccsal kérhető le. Az értékekben a „*” vagy „?” helyettesítő "
"karakterek támogatottak. A „!” karakterrel kezdődő értékek feketelistára "
"kerülnek, és a fehérlista előtt lesznek figyelembe véve, így felülbírálva az "
"alapértelmezett rendszerlistát. Az alapértelmezett rendszerlistán a "
"következő alkalmazások szerepelnek: „@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@”. "
"A felhasználók megszakíthatják a létező megragadásokat a „restore-shortcuts” "
"kulcsban megadott gyorsbillentyűvel."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Módkapcsoló (%d. csoport)" msgstr "Módkapcsoló (%d. csoport)"
@@ -524,37 +539,37 @@ msgstr "Módkapcsoló (%d. csoport)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Monitorváltás" msgstr "Monitorváltás"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Képernyősúgó megjelenítése" msgstr "Képernyősúgó megjelenítése"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Beépített kijelző" msgstr "Beépített kijelző"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Ismeretlen" msgstr "Ismeretlen"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Ismeretlen kijelző" msgstr "Ismeretlen kijelző"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -571,43 +586,47 @@ msgstr "Csengetés esemény"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Nem sikerült megnyitni a(z) „%s” X Window rendszer képernyőt\n" msgstr "Nem sikerült megnyitni a(z) „%s” X Window rendszer képernyőt\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "A munkamenet-kezelőhöz való csatlakozás tiltása" msgstr "A munkamenet-kezelőhöz való csatlakozás tiltása"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "A futó ablakkezelő helyettesítése" msgstr "A futó ablakkezelő helyettesítése"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "A munkamenet-kezelő azonosítójának megadása" msgstr "A munkamenet-kezelő azonosítójának megadása"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "A használandó X megjelenítő" msgstr "A használandó X megjelenítő"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "A munkamenet előkészítése a mentési fájlból" msgstr "A munkamenet előkészítése a mentési fájlból"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Az X-hívások szinkronná tétele" msgstr "Az X-hívások szinkronná tétele"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Futtatás wayland betűszedőként" msgstr "Futtatás wayland betűszedőként"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Futtatás beágyazott betűszedőként" msgstr "Futtatás beágyazott betűszedőként"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "" msgstr ""
"Futtatás teljes megjelenítő kiszolgálóként az egymásba ágyazott helyett" "Futtatás teljes megjelenítő kiszolgálóként az egymásba ágyazott helyett"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Futtatás X11 háttérprogrammal"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -662,7 +681,7 @@ msgstr "Használandó Mutter bővítmény"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "%d. munkaterület" msgstr "%d. munkaterület"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -671,7 +690,7 @@ msgstr ""
"A(z) „%s” kijelző már rendelkezik ablakkezelővel; próbálja a --replace " "A(z) „%s” kijelző már rendelkezik ablakkezelővel; próbálja a --replace "
"kapcsolóval helyettesíteni a jelenlegi ablakkezelőt." "kapcsolóval helyettesíteni a jelenlegi ablakkezelőt."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "A(z) %d. képernyő a(z) „%s” megjelenítőn érvénytelen\n" msgstr "A(z) %d. képernyő a(z) „%s” megjelenítőn érvénytelen\n"
@@ -685,7 +704,7 @@ msgstr "A Mutter ablakkezelőt a részletes mód támogatása nélkül fordítot
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Módkapcsoló: %d. mód" msgstr "Módkapcsoló: %d. mód"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."

219
po/id.po
View File

@@ -9,17 +9,16 @@
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter master\n" "Project-Id-Version: mutter master\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-07 18:39+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-02-09 17:00+0700\n"
"PO-Revision-Date: 2017-08-30 10:46+0700\n"
"Last-Translator: Kukuh Syafaat <syafaatkukuh@gmail.com>\n" "Last-Translator: Kukuh Syafaat <syafaatkukuh@gmail.com>\n"
"Language-Team: Indonesian <gnome-l10n-id@googlegroups.com>\n" "Language-Team: Indonesian <gnome-l10n-id@googlegroups.com>\n"
"Language: id\n" "Language: id\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n" "Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.0.3\n" "X-Generator: Poedit 2.0.6\n"
"Plural-Forms: nplurals=1; plural=0;\n" "Plural-Forms: nplurals=1; plural=0;\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
@@ -47,134 +46,118 @@ msgid "Move window to last workspace"
msgstr "Pindahkan jendela ke ruang kerja terakhir" msgstr "Pindahkan jendela ke ruang kerja terakhir"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Pindahkan jendela satu ruang kerja ke kiri"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Pindahkan jendela satu ruang kerja ke kanan"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Pindahkan jendela satu ruang kerja ke atas" msgstr "Pindahkan jendela satu ruang kerja ke atas"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Pindahkan jendela satu ruang kerja ke bawah" msgstr "Pindahkan jendela satu ruang kerja ke bawah"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Pindahkan jendela satu monitor ke kiri" msgstr "Pindahkan jendela satu monitor ke kiri"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Pindahkan jendela satu monitor ke kanan" msgstr "Pindahkan jendela satu monitor ke kanan"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Pindahkan jendela satu monitor ke atas" msgstr "Pindahkan jendela satu monitor ke atas"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Pindahkan jendela satu monitor ke bawah" msgstr "Pindahkan jendela satu monitor ke bawah"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Bertukar aplikasi" msgstr "Bertukar aplikasi"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Bertukar ke aplikasi sebelumnya" msgstr "Bertukar ke aplikasi sebelumnya"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Bertukar jendela" msgstr "Bertukar jendela"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Bertukar ke jendela sebelumnya" msgstr "Bertukar ke jendela sebelumnya"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Bertukar jendela dari suatu aplikasi" msgstr "Bertukar jendela dari suatu aplikasi"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Bertukar ke jendela aplikasi sebelumnya" msgstr "Bertukar ke jendela aplikasi sebelumnya"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Bertukar kendali sistem" msgstr "Bertukar kendali sistem"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Bertukar ke kendali sistem sebelumnya" msgstr "Bertukar ke kendali sistem sebelumnya"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Bertukar jendela secara langsung" msgstr "Bertukar jendela secara langsung"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Bertukar secara langsung ke jendela sebelumnya" msgstr "Bertukar secara langsung ke jendela sebelumnya"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Bertukar jendela dari suatu app secara langsung" msgstr "Bertukar jendela dari suatu app secara langsung"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Bertukar secara langsung ke jendela sebelumnya dari suatu app" msgstr "Bertukar secara langsung ke jendela sebelumnya dari suatu app"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Bertukar kendali sistem secara langsung" msgstr "Bertukar kendali sistem secara langsung"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Bertukar secara langsung ke kendali sistem sebelumnya" msgstr "Bertukar secara langsung ke kendali sistem sebelumnya"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Sembunyikan semua jendela normal" msgstr "Sembunyikan semua jendela normal"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Bertukar ke ruang kerja 1" msgstr "Bertukar ke ruang kerja 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Bertukar ke ruang kerja 2" msgstr "Bertukar ke ruang kerja 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Bertukar ke ruang kerja 3" msgstr "Bertukar ke ruang kerja 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Bertukar ke ruang kerja 4" msgstr "Bertukar ke ruang kerja 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Bertukar ke ruang kerja terakhir" msgstr "Bertukar ke ruang kerja terakhir"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Pindahkan ke ruang kerja kiri"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Pindahkan ke ruang kerja kanan"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Pindahkan ke ruang kerja di atas" msgstr "Pindahkan ke ruang kerja di atas"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Pindahkan ke ruang kerja di bawah" msgstr "Pindahkan ke ruang kerja di bawah"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sistem" msgstr "Sistem"
@@ -186,6 +169,10 @@ msgstr "Tampilkan sapaan jalankan perintah"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Tampilkan ringkasan aktivitas" msgstr "Tampilkan ringkasan aktivitas"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Pulihkan pintasan papan tik"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Jendela" msgstr "Jendela"
@@ -211,54 +198,50 @@ msgid "Restore window"
msgstr "Pulihkan jendela" msgstr "Pulihkan jendela"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Jungkitkan keadaan berbayang"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Tutup jendela" msgstr "Tutup jendela"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Sembunyikan jendela" msgstr "Sembunyikan jendela"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Pindahkan jendela" msgstr "Pindahkan jendela"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Ubah ukuran jendela" msgstr "Ubah ukuran jendela"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Jungkitkan jendela pada semua atau satu area kerja" msgstr "Jungkitkan jendela pada semua atau satu area kerja"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Naikkan jendela bila tertutup jendela lain, sebaliknya turunkan" msgstr "Naikkan jendela bila tertutup jendela lain, sebaliknya turunkan"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Naikkan jendela di atas jendela-jendela lain" msgstr "Naikkan jendela di atas jendela-jendela lain"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Turunkan jendela di bawah jendela-jendela lain" msgstr "Turunkan jendela di bawah jendela-jendela lain"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Maksimalkan ukuran jendela secara vertikal" msgstr "Maksimalkan ukuran jendela secara vertikal"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Maksimalkan ukuran jendela secara horisontal" msgstr "Maksimalkan ukuran jendela secara horisontal"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Tilik belah di kiri" msgstr "Tilik belah di kiri"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Tilik belah di kanan" msgstr "Tilik belah di kanan"
@@ -497,10 +480,59 @@ msgstr "Bertukar ke VT 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Aktifkan kembali pintasan" msgstr "Aktifkan kembali pintasan"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Izinkan menggenggam dengan Xwayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Mengizinkan pengambilalihan papan ketik yang dikeluarkan oleh aplikasi X11 "
"yang berjalan di Xwayland untuk diperhitungkan. Agar pengambilalihan X11 "
"diperhitungkan di bawah Wayland, klien juga harus mengirimkan ClientMessage "
"X11 tertentu ke jendela root atau berada di antara aplikasi yang tercantum "
"dalam daftar putih \"xwayland-grab-access-rules\"."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr ""
"Aplikasi Xwayland yang diizinkan untuk mengeluarkan pengambilalihan papan "
"ketik"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Buat daftar nama sumber daya atau kelas sumber daya dari jendela X11 yang "
"diizinkan atau tidak diizinkan untuk melakukan pengambilalihan papan ketik "
"X11 di bawah Xwayland. Nama sumber daya atau kelas sumber daya dari jendela "
"X11 yang diberikan dapat diperoleh memakai perintah \"xprop WM_CLASS\". "
"Wildcard \"*\" dan joker \"?\" dalam nilai didukung. Nilai yang dimulai "
"dengan \"!\" masuk daftar hitam, yang punya preseden atas daftar putih, "
"untuk mencabut aplikasi dari daftar sistem bawaan. Daftar sistem bawaan "
"termasuk aplikasi-aplikasi berikut: \"@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@"
"\". Pengguna dapat memutus pengambilalihan yang ada dengan memakai pintasan "
"papan ketik spesifik yang didefinisikan oleh tombol pengikatan \"restore-"
"shortcuts\"."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Tukar Mode: (Grup %d)" msgstr "Tukar Mode: (Grup %d)"
@@ -508,37 +540,37 @@ msgstr "Tukar Mode: (Grup %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Berpindah monitor" msgstr "Berpindah monitor"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Tampilkan bantuan pada layar" msgstr "Tampilkan bantuan pada layar"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Tampilan bawaan" msgstr "Tampilan bawaan"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Tak Dikenal" msgstr "Tak Dikenal"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Tampilan Tak Dikenal" msgstr "Tampilan Tak Dikenal"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -554,42 +586,46 @@ msgstr "Bel peristiwa"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Gagal membuka tampilan X Window System \"%s\"\n" msgstr "Gagal membuka tampilan X Window System \"%s\"\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Menonaktifkan koneksi ke manajer sesi" msgstr "Menonaktifkan koneksi ke manajer sesi"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Mengganti manajer jendela yang tengah berjalan" msgstr "Mengganti manajer jendela yang tengah berjalan"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Tentukan kode pengaturan sesi" msgstr "Tentukan kode pengaturan sesi"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Tampilan X yang digunakna" msgstr "Tampilan X yang digunakna"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Aktifkan sesi dari berkas simpanan" msgstr "Aktifkan sesi dari berkas simpanan"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Buat panggilan X selaras" msgstr "Buat panggilan X selaras"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Jalankan sebagai kompositor wayland" msgstr "Jalankan sebagai kompositor wayland"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Jalankan sebagai kompositor bersarang" msgstr "Jalankan sebagai kompositor bersarang"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Jalankan sebagai server tampilan penuh, ketimbang tampilan bersarang" msgstr "Jalankan sebagai server tampilan penuh, ketimbang tampilan bersarang"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Jalankan dengan backend X11"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -644,7 +680,7 @@ msgstr "Pengaya Mutter yang dipakai"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Area kerja %d" msgstr "Area kerja %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -653,7 +689,7 @@ msgstr ""
"Tampilan \"%s\" sudah memiliki manajer jendela; cobalah gunakan pilihan --" "Tampilan \"%s\" sudah memiliki manajer jendela; cobalah gunakan pilihan --"
"replace untuk mengganti manajer jendela saat ini." "replace untuk mengganti manajer jendela saat ini."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Layar %d pada tampilan \"%s\" tidak valid\n" msgstr "Layar %d pada tampilan \"%s\" tidak valid\n"
@@ -667,7 +703,7 @@ msgstr "Muter dikompilasi tanpa dukungan mode riuh\n"
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Tukar Mode: Mode %d" msgstr "Tukar Mode: Mode %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -679,3 +715,18 @@ msgstr ""
#, c-format #, c-format
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (pada %s)" msgstr "%s (pada %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Pindahkan jendela satu ruang kerja ke kiri"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Pindahkan jendela satu ruang kerja ke kanan"
#~ msgid "Move to workspace left"
#~ msgstr "Pindahkan ke ruang kerja kiri"
#~ msgid "Move to workspace right"
#~ msgstr "Pindahkan ke ruang kerja kanan"
#~ msgid "Toggle shaded state"
#~ msgstr "Jungkitkan keadaan berbayang"

220
po/it.po
View File

@@ -2,18 +2,18 @@
# Based on Italian translation for Metacity # Based on Italian translation for Metacity
# This file is distributed under the same license as metacity package # This file is distributed under the same license as metacity package
# Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 Free Software Foundation, Inc. # Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 Free Software Foundation, Inc.
# Copyright (C) 2018 Free Software Foundation, Inc.
# Pier Luigi Fiorini <plfiorini@libero.it>, 2002. # Pier Luigi Fiorini <plfiorini@libero.it>, 2002.
# Lapo Calamandrei <lapo.calamandrei@virgilio.it>, 2003. # Lapo Calamandrei <lapo.calamandrei@virgilio.it>, 2003.
# Luca Ferretti <lferrett@gnome.org>, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012. # Luca Ferretti <lferrett@gnome.org>, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
# Milo Casagrande <milo@milo.name>, 2012, 2013, 2014, 2015, 2016, 2017. # Milo Casagrande <milo@milo.name>, 2012, 2013, 2014, 2015, 2016, 2017, 2018.
# #
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter\n" "Project-Id-Version: mutter\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-06 04:14+0000\n"
"POT-Creation-Date: 2017-08-29 06:41+0000\n" "PO-Revision-Date: 2018-02-09 16:49+0100\n"
"PO-Revision-Date: 2017-08-29 10:21+0200\n"
"Last-Translator: Milo Casagrande <milo@milo.name>\n" "Last-Translator: Milo Casagrande <milo@milo.name>\n"
"Language-Team: Italian <tp@lists.linux.it>\n" "Language-Team: Italian <tp@lists.linux.it>\n"
"Language: it\n" "Language: it\n"
@@ -21,7 +21,7 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n" "Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n!=1);\n" "Plural-Forms: nplurals=2; plural=(n!=1);\n"
"X-Generator: Poedit 1.8.12\n" "X-Generator: Poedit 2.0.4\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
@@ -48,134 +48,118 @@ msgid "Move window to last workspace"
msgstr "Sposta la finestra sull'ultimo spazio di lavoro" msgstr "Sposta la finestra sull'ultimo spazio di lavoro"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Sposta la finestra sullo spazio di lavoro a sinistra"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Sposta la finestra sullo spazio di lavoro a destra"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Sposta la finestra sullo spazio di lavoro in alto" msgstr "Sposta la finestra sullo spazio di lavoro in alto"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Sposta la finestra sullo spazio di lavoro in basso" msgstr "Sposta la finestra sullo spazio di lavoro in basso"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Sposta la finestra un monitor a sinistra" msgstr "Sposta la finestra un monitor a sinistra"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Sposta la finestra un monitor a destra" msgstr "Sposta la finestra un monitor a destra"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Sposta la finestra un monitor in su" msgstr "Sposta la finestra un monitor in su"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Sposta la finestra un monitor in giù" msgstr "Sposta la finestra un monitor in giù"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Evidenzia le applicazioni" msgstr "Evidenzia le applicazioni"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Evidenzia l'applicazione precedente" msgstr "Evidenzia l'applicazione precedente"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Evidenzia direttamente le finestre" msgstr "Evidenzia direttamente le finestre"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Evidenzia la finestra precedente" msgstr "Evidenzia la finestra precedente"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Evidenzia le finestre di un'applicazione" msgstr "Evidenzia le finestre di un'applicazione"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Evidenzia la finestra precedente di un'applicazione" msgstr "Evidenzia la finestra precedente di un'applicazione"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Evidenzia i controlli di sistema" msgstr "Evidenzia i controlli di sistema"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Evidenzia i controlli di sistema precedenti" msgstr "Evidenzia i controlli di sistema precedenti"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Evidenzia direttamente le finestre" msgstr "Evidenzia direttamente le finestre"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Evidenzia direttamente la finestra precedente" msgstr "Evidenzia direttamente la finestra precedente"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Evidenzia direttamente le finestre di una applicazione" msgstr "Evidenzia direttamente le finestre di una applicazione"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Evidenzia direttamente la finestra precedente di un'applicazione" msgstr "Evidenzia direttamente la finestra precedente di un'applicazione"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Evidenzia direttamente i controlli di sistema" msgstr "Evidenzia direttamente i controlli di sistema"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Evidenzia direttamente i controlli di sistema precedenti" msgstr "Evidenzia direttamente i controlli di sistema precedenti"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Nasconde tutte le finestre normali" msgstr "Nasconde tutte le finestre normali"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Passa allo spazio di lavoro 1" msgstr "Passa allo spazio di lavoro 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Passa allo spazio di lavoro 2" msgstr "Passa allo spazio di lavoro 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Passa allo spazio di lavoro 3" msgstr "Passa allo spazio di lavoro 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Passa allo spazio di lavoro 4" msgstr "Passa allo spazio di lavoro 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Passa all'ultimo spazio di lavoro" msgstr "Passa all'ultimo spazio di lavoro"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Sposta su spazio di lavoro a sinistra"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Sposta su spazio di lavoro a destra"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Sposta su spazio di lavoro in alto" msgstr "Sposta su spazio di lavoro in alto"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Sposta su spazio di lavoro in basso" msgstr "Sposta su spazio di lavoro in basso"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sistema" msgstr "Sistema"
@@ -187,6 +171,10 @@ msgstr "Mostra il prompt esegui comando"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Mostra la panoramica delle attività" msgstr "Mostra la panoramica delle attività"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Ripristina le scorciatoie da tastiera"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Finestre" msgstr "Finestre"
@@ -212,58 +200,54 @@ msgid "Restore window"
msgstr "Ripristina la finestra" msgstr "Ripristina la finestra"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Attiva/Disattiva lo stato arrotolato"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Chiudi la finestra" msgstr "Chiudi la finestra"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Ridimensiona la finestra" msgstr "Ridimensiona la finestra"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Muovi la finestra" msgstr "Muovi la finestra"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Ridimensiona la finestra" msgstr "Ridimensiona la finestra"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "" msgstr ""
"Attiva/Disattiva la stato «su tutti gli spazi di lavoro» per la finestra" "Attiva/Disattiva la stato «su tutti gli spazi di lavoro» per la finestra"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Solleva la finestra se è coperta, in caso contrario l'abbassa" msgstr "Solleva la finestra se è coperta, in caso contrario l'abbassa"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Solleva la finestra sopra le altre" msgstr "Solleva la finestra sopra le altre"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Abbassa la finestra sotto le altre" msgstr "Abbassa la finestra sotto le altre"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Massimizza verticalmente la finestra" msgstr "Massimizza verticalmente la finestra"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Massimizza orizzontalmente la finestra" msgstr "Massimizza orizzontalmente la finestra"
# scorciatoia per mettere la finestra a mezzo schermo intero sulla sinistra # scorciatoia per mettere la finestra a mezzo schermo intero sulla sinistra
# #
# traduzione infedele, ma "frazionamento della vista a sn/ds" mi pare peggio # traduzione infedele, ma "frazionamento della vista a sn/ds" mi pare peggio
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Massimizza a sinistra" msgstr "Massimizza a sinistra"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Massimizza a destra" msgstr "Massimizza a destra"
@@ -510,10 +494,57 @@ msgstr "Passa al VT 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Riabilita scorciatoie" msgstr "Riabilita scorciatoie"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Consente la cattura con Xwayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Consente la cattura della tastiera da applicazioni X11 in esecuzione su "
"Xwayland. Affinché la cattura X11 venga considerata da Wayland, il client "
"deve inviare uno specifico messaggio ClientMessage X11 alla finestra "
"principale o essere nell'elenco di applicazioni autorizzate tramite la "
"chiave \"xwayland-grab-access-rules\"."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr ""
"Applicazioni Xwayland autorizzare a inizializzare catture della tastiera"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Lista di nomi o classi delle risorse di finestre X11 autorizzate o meno a "
"inizializzare la cattura della tastiera X11 su Xwayland. Per ottenere i nomi "
"o le classi delle risorse di una finestra X11 è possibile utilizzare il "
"comando \"xprop WM_CLASS\". Sono consentiti i caratteri \"*\" e \"?"
"\" (asterisco e punto di domanda) nei valori. Valori che iniziano con \"!\" "
"indicano una risorsa da escludere che ha priorità più alta rispetto alle "
"applicazioni autorizzate. La lista predefinita di sistema include le "
"seguenti applicazioni: \"@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@\" Gli utenti "
"possono interrompere una cattura esistente utilizzando la scorciatoia "
"definita nella chiave \"restore-shortcuts\"."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Cambio modalità (gruppo %d)" msgstr "Cambio modalità (gruppo %d)"
@@ -521,37 +552,37 @@ msgstr "Cambio modalità (gruppo %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Cambia monitor" msgstr "Cambia monitor"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Mostra aiuto sullo schermo" msgstr "Mostra aiuto sullo schermo"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Display integrato" msgstr "Display integrato"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Sconosciuto" msgstr "Sconosciuto"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Display sconosciuto" msgstr "Display sconosciuto"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -568,42 +599,46 @@ msgstr "Evento campanella"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Apertura del display «%s» di X Window System non riuscita\n" msgstr "Apertura del display «%s» di X Window System non riuscita\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Disabilita la connessione al gestore di sessione" msgstr "Disabilita la connessione al gestore di sessione"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Sostituisce il window manager in esecuzione" msgstr "Sostituisce il window manager in esecuzione"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Specifica l'ID di gestione sessione" msgstr "Specifica l'ID di gestione sessione"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Display X da usare" msgstr "Display X da usare"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Inizializza la sessione da file salvato" msgstr "Inizializza la sessione da file salvato"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Rende le chiamate X sincrone" msgstr "Rende le chiamate X sincrone"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Esegui come compositor Wayland" msgstr "Esegui come compositor Wayland"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Esegui come compositor annidato" msgstr "Esegui come compositor annidato"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Esegui come display server invece che annidato" msgstr "Esegui come display server invece che annidato"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Esegui con sistema X11"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -658,7 +693,7 @@ msgstr "Plugin Mutter da usare"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Spazio di lavoro %d" msgstr "Spazio di lavoro %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -667,7 +702,7 @@ msgstr ""
"Il display «%s» ha già un window manager; provare a utilizzare l'opzione --" "Il display «%s» ha già un window manager; provare a utilizzare l'opzione --"
"replace per sostituirlo." "replace per sostituirlo."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Lo schermo %d sul display «%s» non è valido\n" msgstr "Lo schermo %d sul display «%s» non è valido\n"
@@ -682,7 +717,7 @@ msgstr ""
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Cambio modalità: modalità %d" msgstr "Cambio modalità: modalità %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -694,3 +729,18 @@ msgstr ""
#, c-format #, c-format
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (su %s)" msgstr "%s (su %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Sposta la finestra sullo spazio di lavoro a sinistra"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Sposta la finestra sullo spazio di lavoro a destra"
#~ msgid "Move to workspace left"
#~ msgstr "Sposta su spazio di lavoro a sinistra"
#~ msgid "Move to workspace right"
#~ msgstr "Sposta su spazio di lavoro a destra"
#~ msgid "Toggle shaded state"
#~ msgstr "Attiva/Disattiva lo stato arrotolato"

226
po/ko.po
View File

@@ -7,6 +7,7 @@
# #
# Updated in mutter: # Updated in mutter:
# Changwoo Ryu <cwryu@debian.org>, 2011-2017. # Changwoo Ryu <cwryu@debian.org>, 2011-2017.
# Gwan-gyeong Mun <elongbug@gmail.com>, 2018.
# #
# #
# 주의: # 주의:
@@ -16,11 +17,10 @@
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter\n" "Project-Id-Version: mutter\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-06 04:14+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-02-24 16:14+0900\n"
"PO-Revision-Date: 2017-09-02 12:57+0900\n" "Last-Translator: Gwan-gyeong Mun <elongbug@gmail.com>\n"
"Last-Translator: Changwoo Ryu <cwryu@debian.org>\n"
"Language-Team: GNOME Korea <gnome-kr@googlegroups.com>\n" "Language-Team: GNOME Korea <gnome-kr@googlegroups.com>\n"
"Language: ko\n" "Language: ko\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
@@ -53,134 +53,118 @@ msgid "Move window to last workspace"
msgstr "창을 최근 작업 공간으로 옮기기" msgstr "창을 최근 작업 공간으로 옮기기"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "창을 한칸 왼쪽 작업 공간으로 옮기기"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "창을 한칸 오른쪽 작업 공간으로 옮기기"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "창을 한칸 위 작업 공간으로 옮기기" msgstr "창을 한칸 위 작업 공간으로 옮기기"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "창을 한칸 아래 작업 공간으로 옮기기" msgstr "창을 한칸 아래 작업 공간으로 옮기기"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "창을 한칸 왼쪽 모니터로 옮기기" msgstr "창을 한칸 왼쪽 모니터로 옮기기"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "창을 한칸 오른쪽 모니터로 옮기기" msgstr "창을 한칸 오른쪽 모니터로 옮기기"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "창을 한칸 위 모니터로 옮기기" msgstr "창을 한칸 위 모니터로 옮기기"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "창을 한칸 아래 모니터로 옮기기" msgstr "창을 한칸 아래 모니터로 옮기기"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr " 전환" msgstr "프로그램 전환"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "이전 으로 전환" msgstr "이전 프로그램으로 전환"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "창 전환" msgstr "창 전환"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "이전 창으로 전환" msgstr "이전 창으로 전환"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "한 의 창 전환" msgstr "한 프로그램의 창 전환"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "한 의 이전 창으로 전환" msgstr "한 프로그램의 이전 창으로 전환"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "시스템 조작 전환" msgstr "시스템 조작 전환"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "이전 시스템 조작으로 전환" msgstr "이전 시스템 조작으로 전환"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "직접 창 전환" msgstr "직접 창 전환"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "직접 이전 창으로 전환" msgstr "직접 이전 창으로 전환"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "직접 한 앱의 창 전환" msgstr "직접 한 앱의 창 전환"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "직접 한 앱의 이전 창으로 전환" msgstr "직접 한 앱의 이전 창으로 전환"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "직접 시스템 조작 전환" msgstr "직접 시스템 조작 전환"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "직접 이전 시스템 조작으로 전환" msgstr "직접 이전 시스템 조작으로 전환"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "모든 일반 창 감추기" msgstr "모든 일반 창 감추기"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "작업 공간 1로 이동" msgstr "작업 공간 1로 이동"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "작업 공간 2로 이동" msgstr "작업 공간 2로 이동"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "작업 공간 3으로 이동" msgstr "작업 공간 3으로 이동"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "작업 공간 4로 이동" msgstr "작업 공간 4로 이동"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "최근 작업 공간으로 이동" msgstr "최근 작업 공간으로 이동"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "왼쪽 작업 공간으로 옮기기"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "오른쪽 작업 공간으로 옮기기"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "위 작업 공간으로 옮기기" msgstr "위 작업 공간으로 옮기기"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "아래 작업 공간으로 옮기기" msgstr "아래 작업 공간으로 옮기기"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "시스템" msgstr "시스템"
@@ -192,6 +176,10 @@ msgstr "실행 명령 프롬프트 보이기"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "현재 활동 보이기" msgstr "현재 활동 보이기"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "키보드 바로 가기 복구"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "창" msgstr "창"
@@ -217,54 +205,50 @@ msgid "Restore window"
msgstr "창 복구" msgstr "창 복구"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "그림자 상태 토글"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "창 닫기" msgstr "창 닫기"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "창 감추기" msgstr "창 감추기"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "창 옮기기" msgstr "창 옮기기"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "창 크기 조정" msgstr "창 크기 조정"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "창을 모든/하나의 작업 공간에 두기 토글" msgstr "창을 모든/하나의 작업 공간에 두기 토글"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "창이 가려 있으면 올리고 아니면 내리기" msgstr "창이 가려 있으면 올리고 아니면 내리기"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "창을 다른 창 위로 올리기" msgstr "창을 다른 창 위로 올리기"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "창을 다른 창 아래로 내리기" msgstr "창을 다른 창 아래로 내리기"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "창을 세로 방향으로 최대화" msgstr "창을 세로 방향으로 최대화"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "창을 가로 방향으로 최대화" msgstr "창을 가로 방향으로 최대화"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "왼쪽 나눔창 보기" msgstr "왼쪽 나눔창 보기"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "오른쪽 나눔창 보기" msgstr "오른쪽 나눔창 보기"
@@ -493,10 +477,53 @@ msgstr "가상 터미널 12로 이동"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "바로 가기 다시 사용하기" msgstr "바로 가기 다시 사용하기"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "X웨일랜드에서 잡기 허용"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"X웨일랜드 환경에서 실행하는 X11 프로그램의 키보드 잡기 허용을 고려합니다. 웨"
"일랜드에서 X11 잡기를 고려하려면, 클라이언트는 특정 X11 클라이언트메시지를 루"
"트 창에 보내거나 \"xwayland-grab-access-rules\"의 허용 목록에 있는 프로그램 "
"중 하나여야 합니다."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "X웨일랜드 프로그램에서 키보드 잡기 허용"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"X웨일랜드에서 X11 키보드 잡기를 허용하거나 허용하지 않는 X11 창의 리소스 이"
"름 또는 리소스 클래스를 나열하세요. X11 창의 리소스 이름 또는 리소스 클래스"
"는 “xprop WM_CLASS\" 명령을 사용하여 얻을 수 있습니다. 와일드카드 \"*\"와 \"?"
"\"를 값에서 사용할 수 있습니다. \"!\"로 시작하는 값은 허용 목록보다 높은 우선"
"순위로 블랙리스트 처리되어, 프로그램이 기본 시스템 목록에서 빠지게 됩니다. 기"
"본 시스템 목록에 포함된 프로그램: “@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” 사용"
"자는 “restore-shortcuts” 키 바인딩에 정의된 특정 키보드 바로 가기를 사용하여 "
"기존 잡기를 중단할 수 있습니다."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "모드 전환 (그룹 %d)" msgstr "모드 전환 (그룹 %d)"
@@ -504,37 +531,37 @@ msgstr "모드 전환 (그룹 %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "모니터 전환" msgstr "모니터 전환"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "화면 도움말 표시" msgstr "화면 도움말 표시"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "내장 디스플레이" msgstr "내장 디스플레이"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "알 수 없음" msgstr "알 수 없음"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "알 수 없는 디스플레이" msgstr "알 수 없는 디스플레이"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -551,41 +578,45 @@ msgstr "삑소리 이벤트"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "X 윈도 시스템 디스플레이 “%s”을(를) 여는데 실패하였습니다\n" msgstr "X 윈도 시스템 디스플레이 “%s”을(를) 여는데 실패하였습니다\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "세션 관리자와 연결 하지 않습니다" msgstr "세션 관리자와 연결 하지 않습니다"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "실행 중인 창 관리자를 바꿉니다" msgstr "실행 중인 창 관리자를 바꿉니다"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "세션 관리 ID를 지정합니다" msgstr "세션 관리 ID를 지정합니다"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "사용할 X 디스플레이" msgstr "사용할 X 디스플레이"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "저장 파일에서 세션을 초기화 합니다" msgstr "저장 파일에서 세션을 초기화 합니다"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "동기 X 호출을 합니다" msgstr "동기 X 호출을 합니다"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "웨일랜드 컴포지터로 실행합니다" msgstr "웨일랜드 컴포지터로 실행합니다"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "내장 컴포지터로 실행합니다" msgstr "중첩 컴포지터로 실행합니다"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "전체 디스플레이 서버로 실행, 내장 프로그램 아님" msgstr "전체 디스플레이 서버로 실행, 중첩 컴포지터가 아님"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "X11 백 엔드로 실행 합니다"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
@@ -639,7 +670,7 @@ msgstr "사용할 머터 플러그인"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "작업 공간 %d" msgstr "작업 공간 %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -648,7 +679,7 @@ msgstr ""
"디스플레이 “%s”에 이미 창 관리자가 있습니다. 현재 창 관리자를 바꾸려면 --" "디스플레이 “%s”에 이미 창 관리자가 있습니다. 현재 창 관리자를 바꾸려면 --"
"replace 옵션을 써보십시오." "replace 옵션을 써보십시오."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "디스플레이 “%2$s”의 화면 %1$d은(는) 잘못되었습니다\n" msgstr "디스플레이 “%2$s”의 화면 %1$d은(는) 잘못되었습니다\n"
@@ -662,7 +693,7 @@ msgstr "머터가 자세한 모드 지원 없이 컴파일 되었습니다\n"
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "모드 전환: 모드 %d" msgstr "모드 전환: 모드 %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -675,3 +706,18 @@ msgstr ""
#, c-format #, c-format
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (%s에서)" msgstr "%s (%s에서)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "창을 한칸 왼쪽 작업 공간으로 옮기기"
#~ msgid "Move window one workspace to the right"
#~ msgstr "창을 한칸 오른쪽 작업 공간으로 옮기기"
#~ msgid "Move to workspace left"
#~ msgstr "왼쪽 작업 공간으로 옮기기"
#~ msgid "Move to workspace right"
#~ msgstr "오른쪽 작업 공간으로 옮기기"
#~ msgid "Toggle shaded state"
#~ msgstr "그림자 상태 토글"

228
po/lt.po
View File

@@ -6,15 +6,14 @@
# Tomas Kuliavas <tokul@users.sourceforge.net>, 2003. # Tomas Kuliavas <tokul@users.sourceforge.net>, 2003.
# Žygimantas Beručka <zygis@gnome.org>, 2004-2007. # Žygimantas Beručka <zygis@gnome.org>, 2004-2007.
# Gintautas Miliauskas <gintautas@miliauskas.lt>, 2007-2009, 2010. # Gintautas Miliauskas <gintautas@miliauskas.lt>, 2007-2009, 2010.
# Aurimas Černius <aurisc4@gmail.com>, 2013, 2014, 2015, 2016, 2017. # Aurimas Černius <aurisc4@gmail.com>, 2013, 2014, 2015, 2016, 2017, 2018.
# #
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: lt\n" "Project-Id-Version: lt\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-03-01 18:57+0000\n"
"POT-Creation-Date: 2017-08-29 06:41+0000\n" "PO-Revision-Date: 2018-03-03 13:37+0200\n"
"PO-Revision-Date: 2017-08-29 15:57+0300\n"
"Last-Translator: Aurimas Černius <aurisc4@gmail.com>\n" "Last-Translator: Aurimas Černius <aurisc4@gmail.com>\n"
"Language-Team: Lietuvių <gnome-lt@lists.akl.lt>\n" "Language-Team: Lietuvių <gnome-lt@lists.akl.lt>\n"
"Language: lt\n" "Language: lt\n"
@@ -50,134 +49,118 @@ msgid "Move window to last workspace"
msgstr "Perkelti langą į pastarąją darbo sritį" msgstr "Perkelti langą į pastarąją darbo sritį"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Perkelti langą į kairiau esančią darbo sritį"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Perkelti langą į dešiniau esančią darbo sritį"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Perkelti langą į aukščiau esančią darbo sritį" msgstr "Perkelti langą į aukščiau esančią darbo sritį"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Perkelti langą į žemiau esančią darbo sritį" msgstr "Perkelti langą į žemiau esančią darbo sritį"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Perkelti langą į kairiau esantį monitorių" msgstr "Perkelti langą į kairiau esantį monitorių"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Perkelti langą į dešiniau esantį monitorių" msgstr "Perkelti langą į dešiniau esantį monitorių"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Perkelti langą į aukščiau esantį monitorių" msgstr "Perkelti langą į aukščiau esantį monitorių"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Perkelti langą į žemiau esantį monitorių" msgstr "Perkelti langą į žemiau esantį monitorių"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Pereiti tarp programų" msgstr "Pereiti tarp programų"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Pereiti į ankstesnę programą" msgstr "Pereiti į ankstesnę programą"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Pereiti tarp langų" msgstr "Pereiti tarp langų"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Pereiti į ankstesnį langą" msgstr "Pereiti į ankstesnį langą"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Pereiti tarp programos langų" msgstr "Pereiti tarp programos langų"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Pereiti į ankstesnį programos langą" msgstr "Pereiti į ankstesnį programos langą"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Pereiti tarp sistemos valdiklių" msgstr "Pereiti tarp sistemos valdiklių"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Pereiti prie ankstesnio sistemos valdiklio" msgstr "Pereiti prie ankstesnio sistemos valdiklio"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Tiesiogiai pereiti tarp langų" msgstr "Tiesiogiai pereiti tarp langų"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Tiesiogiai pereiti į ankstesnį langą" msgstr "Tiesiogiai pereiti į ankstesnį langą"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Tiesiogiai pereiti tarp programos langų" msgstr "Tiesiogiai pereiti tarp programos langų"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Tiesiogiai pereiti prie ankstesnio programos lango" msgstr "Tiesiogiai pereiti prie ankstesnio programos lango"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Tiesiogiai pereiti tarp sistemos valdiklių" msgstr "Tiesiogiai pereiti tarp sistemos valdiklių"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Tiesiogiai pereiti prie ankstesnio sistemos valdiklio" msgstr "Tiesiogiai pereiti prie ankstesnio sistemos valdiklio"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Paslėpti visus įprastinius langus" msgstr "Paslėpti visus įprastinius langus"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Persijungti į darbo sritį Nr.1" msgstr "Persijungti į darbo sritį Nr.1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Persijungti į darbo sritį Nr.2" msgstr "Persijungti į darbo sritį Nr.2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Persijungti į darbo sritį Nr.3" msgstr "Persijungti į darbo sritį Nr.3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Persijungti į darbo sritį Nr.4" msgstr "Persijungti į darbo sritį Nr.4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Persijungti į pastarąją darbo sritį" msgstr "Persijungti į pastarąją darbo sritį"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Perkelti į darbo sritį kairėje"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Perkelti į darbo sritį dešinėje"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Perkelti į darbo sritį viršuje" msgstr "Perkelti į darbo sritį viršuje"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Perkelti į darbo sritį apačioje" msgstr "Perkelti į darbo sritį apačioje"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sistema" msgstr "Sistema"
@@ -189,6 +172,10 @@ msgstr "Rodyti komandų paleidimo langelį"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Rodyti veiklų apžvalgą" msgstr "Rodyti veiklų apžvalgą"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Atkurti klaviatūros trumpinius"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Langai" msgstr "Langai"
@@ -214,55 +201,51 @@ msgid "Restore window"
msgstr "Atkurti lango dydį" msgstr "Atkurti lango dydį"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Perjungti lango sutraukimo būseną"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Užverti langą" msgstr "Užverti langą"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Slėpti langą" msgstr "Slėpti langą"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Perkelti langą" msgstr "Perkelti langą"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Keisti lango dydį" msgstr "Keisti lango dydį"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Perjungti lango buvimo visose darbo srityse būseną" msgstr "Perjungti lango buvimo visose darbo srityse būseną"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "" msgstr ""
"Iškelti langą, jei jis uždengtas kito lango, priešingu atveju jį nuleisti" "Iškelti langą, jei jis uždengtas kito lango, priešingu atveju jį nuleisti"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Iškelti langą virš kitų langų" msgstr "Iškelti langą virš kitų langų"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Nuleisti langą žemiau kitų langų" msgstr "Nuleisti langą žemiau kitų langų"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Išdidinti langą vertikaliai" msgstr "Išdidinti langą vertikaliai"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Išdidinti langą horizontaliai" msgstr "Išdidinti langą horizontaliai"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Rodyti skyrimą kairėje" msgstr "Rodyti skyrimą kairėje"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Rodyti skyrimą dešinėje" msgstr "Rodyti skyrimą dešinėje"
@@ -406,16 +389,6 @@ msgid "Enable experimental features"
msgstr "Įjungti eksperimentines savybes" msgstr "Įjungti eksperimentines savybes"
#: data/org.gnome.mutter.gschema.xml.in:108 #: data/org.gnome.mutter.gschema.xml.in:108
#| msgid ""
#| "To enable experimental features, add the feature keyword to the list. "
#| "Whether the feature requires restarting the compositor depends on the "
#| "given feature. Any experimental feature is not required to still be "
#| "available, or configurable. Dont expect adding anything in this setting "
#| "to be future proof. Currently possible keywords: • “scale-monitor-"
#| "framebuffer” — makes mutter default to layout logical monitors in a "
#| "logical pixel coordinate space, while scaling monitor framebuffers "
#| "instead of window content, to manage HiDPI monitors. Does not require a "
#| "restart."
msgid "" msgid ""
"To enable experimental features, add the feature keyword to the list. " "To enable experimental features, add the feature keyword to the list. "
"Whether the feature requires restarting the compositor depends on the given " "Whether the feature requires restarting the compositor depends on the given "
@@ -510,10 +483,56 @@ msgstr "Persijungti į VT 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Iš naujo įjungti trumpinius" msgstr "Iš naujo įjungti trumpinius"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Leisti pagriebimus su XWayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Leisti turėti omenyje X11 programų, veikiančių Xwayland, išduotus "
"klaviatūros pagriebimus. Tam, kad X11 pagriebimas būtų turimas omenyje "
"naudojant Wayland, klientas privalo arba siųsti tam tikrą X11 ClientMessage "
"į šakninį langą arba būti tarp programų, esančių rakto „xwayland-grab-access-"
"rules“ baltajame sąraše."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Xwayland programos, kurioms leidžiama išduoti klaviatūros pagriebimus"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Išvardyti X11 langų, kuriems naudojant Wayland leidžiama ar neleidžiama "
"išduoti X11 klaviatūros pagriebimus, išteklių pavadinimus ar išteklių "
"klases. Nurodyto lango ištekliaus pavadinimas ar ištekliaus klasė gali būti "
"gauta naudojant komandą „xprop WM_CLASS“. Reikšmėse yra palaikomi pakaitos "
"simboliai „*“ ir „?“. Reikšmės prasidedančios „!“ yra įtraukiamos į juodąjį "
"sąrašą (tam, kad būtų panaikintos iš numatytojo sistemos sąrašo) ir turi "
"pirmumo teisę baltojo sąrašo atžvilgiu. Į numatytąjį sistemos sąrašą įeina "
"šios programos: „@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@“. Naudotojai gali "
"panaikinti esamą pagriebimą, naudodami tam tikrą klaviatūros trumpinį, kuris "
"apibrėžtas rakto susiejimo raktu „restore-shortcuts“."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2325
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Veiksenos perjungimas (Grupė %d)" msgstr "Veiksenos perjungimas (Grupė %d)"
@@ -521,37 +540,37 @@ msgstr "Veiksenos perjungimas (Grupė %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2348
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Perjungti monitorių" msgstr "Perjungti monitorių"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2350
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Rodyti pagalbą ekrane" msgstr "Rodyti pagalbą ekrane"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Integruotas vaizduoklis" msgstr "Integruotas vaizduoklis"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Nežinomas" msgstr "Nežinomas"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Nežinomas vaizduoklis" msgstr "Nežinomas vaizduoklis"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -566,42 +585,46 @@ msgstr "Skambučio įvykis"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Nepavyko atverti X Window sistemos vaizduoklio „%s“\n" msgstr "Nepavyko atverti X Window sistemos vaizduoklio „%s“\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Išjungti susijungimą su sesijos tvarkytuve" msgstr "Išjungti susijungimą su sesijos tvarkytuve"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Pakeisti veikiančią langų tvarkytuvę" msgstr "Pakeisti veikiančią langų tvarkytuvę"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Nurodyti sesijos tvarkymo ID" msgstr "Nurodyti sesijos tvarkymo ID"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Naudotinas X ekranas" msgstr "Naudotinas X ekranas"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Inicializuoti sesiją iš išsaugojimo failo" msgstr "Inicializuoti sesiją iš išsaugojimo failo"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Sinchronizuoti X iškvietimus" msgstr "Sinchronizuoti X iškvietimus"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Vykdyti kaip wayland kompozitorių" msgstr "Vykdyti kaip wayland kompozitorių"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Vykdyti kaip įdėtinį kompozitorių" msgstr "Vykdyti kaip įdėtinį kompozitorių"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Vykdyti kaip visą vaizduoklio serverį, o ne įdėtinį" msgstr "Vykdyti kaip visą vaizduoklio serverį, o ne įdėtinį"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Paleisti su X11 realizacija"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -655,7 +678,7 @@ msgstr "Naudojamas Mutter įskiepis"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Darbo sritis %d" msgstr "Darbo sritis %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -664,7 +687,7 @@ msgstr ""
"Vaizduoklis „%s“ jau turi langų tvarkytuvę; pabandykite pakeisti esamą langų " "Vaizduoklis „%s“ jau turi langų tvarkytuvę; pabandykite pakeisti esamą langų "
"tvarkytuvę, naudodami parametrą --replace." "tvarkytuvę, naudodami parametrą --replace."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Ekranas %d vaizduoklyje „%s“ yra netinkamas\n" msgstr "Ekranas %d vaizduoklyje „%s“ yra netinkamas\n"
@@ -673,12 +696,12 @@ msgstr "Ekranas %d vaizduoklyje „%s“ yra netinkamas\n"
msgid "Mutter was compiled without support for verbose mode\n" msgid "Mutter was compiled without support for verbose mode\n"
msgstr "Mutter buvo sukompiliuota be išsamaus veikimo veiksenos\n" msgstr "Mutter buvo sukompiliuota be išsamaus veikimo veiksenos\n"
#: src/wayland/meta-wayland-tablet-pad.c:563 #: src/wayland/meta-wayland-tablet-pad.c:567
#, c-format #, c-format
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Veiksenos perjungimas: veiksena %d" msgstr "Veiksenos perjungimas: veiksena %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -691,6 +714,21 @@ msgstr ""
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (kompiuteryje %s)" msgstr "%s (kompiuteryje %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Perkelti langą į kairiau esančią darbo sritį"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Perkelti langą į dešiniau esančią darbo sritį"
#~ msgid "Move to workspace left"
#~ msgstr "Perkelti į darbo sritį kairėje"
#~ msgid "Move to workspace right"
#~ msgstr "Perkelti į darbo sritį dešinėje"
#~ msgid "Toggle shaded state"
#~ msgstr "Perjungti lango sutraukimo būseną"
#~ msgid "Failed to scan themes directory: %s\n" #~ msgid "Failed to scan themes directory: %s\n"
#~ msgstr "Nepavyko nuskanuoti temų aplanko: %s\n" #~ msgstr "Nepavyko nuskanuoti temų aplanko: %s\n"

220
po/lv.po
View File

@@ -7,14 +7,13 @@
# Raivis Dejus <orvils@gmail.com>, 2006, 2007, 2009. # Raivis Dejus <orvils@gmail.com>, 2006, 2007, 2009.
# Rudolfs <rudolfs.mazurs@gmail.com>, 2011. # Rudolfs <rudolfs.mazurs@gmail.com>, 2011.
# Rūdofls Mazurs <rudolfs.mazurs@gmail.com>, 2011, 2012. # Rūdofls Mazurs <rudolfs.mazurs@gmail.com>, 2011, 2012.
# Rūdolfs Mazurs <rudolfs.mazurs@gmail.com>, 2012, 2013, 2014, 2015, 2016, 2017. # Rūdolfs Mazurs <rudolfs.mazurs@gmail.com>, 2012, 2013, 2014, 2015, 2016, 2017, 2018.
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: lv\n" "Project-Id-Version: lv\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?product=mutter" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-06 04:14+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-02-25 15:45+0200\n"
"PO-Revision-Date: 2017-09-03 19:25+0200\n"
"Last-Translator: Rūdolfs Mazurs <rudolfs.mazurs@gmail.com>\n" "Last-Translator: Rūdolfs Mazurs <rudolfs.mazurs@gmail.com>\n"
"Language-Team: Latvian <lata-l10n@googlegroups.com>\n" "Language-Team: Latvian <lata-l10n@googlegroups.com>\n"
"Language: lv\n" "Language: lv\n"
@@ -50,134 +49,118 @@ msgid "Move window to last workspace"
msgstr "Pārvietot logu uz pēdējo darbvietu" msgstr "Pārvietot logu uz pēdējo darbvietu"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Pārvietot logu uz darbvietu pa kreisi"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Pārvietot logu uz darbvietu pa labi"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Pārvietot logu uz darbvietu augšup" msgstr "Pārvietot logu uz darbvietu augšup"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Pārvietot logu uz darbvietu lejup" msgstr "Pārvietot logu uz darbvietu lejup"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Pārvietot logu uz monitoru pa kreisi" msgstr "Pārvietot logu uz monitoru pa kreisi"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Pārvietot logu uz monitoru pa labi" msgstr "Pārvietot logu uz monitoru pa labi"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Pārvietot logu uz monitoru augšup" msgstr "Pārvietot logu uz monitoru augšup"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Pārvietot logu uz monitoru lejup" msgstr "Pārvietot logu uz monitoru lejup"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Pārslēgt lietotnes" msgstr "Pārslēgt lietotnes"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Pārslēgties uz iepriekšējo lietotni" msgstr "Pārslēgties uz iepriekšējo lietotni"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Pārslēgt logus" msgstr "Pārslēgt logus"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Pārslēgties uz iepriekšējo logu" msgstr "Pārslēgties uz iepriekšējo logu"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Pārslēgt vienas lietotnes logus" msgstr "Pārslēgt vienas lietotnes logus"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Pārslēgties uz lietotnes iepriekšējo logu" msgstr "Pārslēgties uz lietotnes iepriekšējo logu"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Pārslēgt sistēmas vadīklas" msgstr "Pārslēgt sistēmas vadīklas"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Pārslēgties uz iepriekšējo sistēmas vadīklu" msgstr "Pārslēgties uz iepriekšējo sistēmas vadīklu"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Pārslēgties starp logiem tieši" msgstr "Pārslēgties starp logiem tieši"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Pārslēgties tieši uz iepriekšējo logu" msgstr "Pārslēgties tieši uz iepriekšējo logu"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Pārslēgties starp lietotnes logiem tieši" msgstr "Pārslēgties starp lietotnes logiem tieši"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Pārslēgties tieši uz iepriekšējo lietotnes logu" msgstr "Pārslēgties tieši uz iepriekšējo lietotnes logu"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Pārslēgt sistēmas vadīklas tieši" msgstr "Pārslēgt sistēmas vadīklas tieši"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Pārslēgties tieši uz iepriekšējo sistēmas vadīklu" msgstr "Pārslēgties tieši uz iepriekšējo sistēmas vadīklu"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Slēpt visus parastos logus" msgstr "Slēpt visus parastos logus"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Pārslēgties uz 1. darbvietu" msgstr "Pārslēgties uz 1. darbvietu"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Pārslēgties uz 2. darbvietu" msgstr "Pārslēgties uz 2. darbvietu"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Pārslēgties uz 3. darbvietu" msgstr "Pārslēgties uz 3. darbvietu"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Pārslēgties uz 4. darbvietu" msgstr "Pārslēgties uz 4. darbvietu"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Pārslēgties uz pēdējo darbvietu" msgstr "Pārslēgties uz pēdējo darbvietu"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Pāriet uz darbvietu pa kreisi"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Pāriet uz darbvietu pa labi"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Pāriet uz darbvietu augšup" msgstr "Pāriet uz darbvietu augšup"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Pāriet uz darbvietu lejup" msgstr "Pāriet uz darbvietu lejup"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sistēma" msgstr "Sistēma"
@@ -189,6 +172,10 @@ msgstr "Rādīt palaišanas komandrindu"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Rādīt aktivitāšu pārskatu" msgstr "Rādīt aktivitāšu pārskatu"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Atjaunot tastatūras saīsnes"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Logi" msgstr "Logi"
@@ -214,54 +201,50 @@ msgid "Restore window"
msgstr "Atjaunot loga izmēru" msgstr "Atjaunot loga izmēru"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Pārslēgt ēnoto stāvokli"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Aizvērt logu" msgstr "Aizvērt logu"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Paslēpt logu" msgstr "Paslēpt logu"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Pārvietot logu" msgstr "Pārvietot logu"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Mainīt loga izmēru" msgstr "Mainīt loga izmēru"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Pārslēgt, vai logam jābūt visās darbvietās vai vienā" msgstr "Pārslēgt, vai logam jābūt visās darbvietās vai vienā"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Pacelt logu, ja to aizsedz, citādi pazemināt" msgstr "Pacelt logu, ja to aizsedz, citādi pazemināt"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Pacelt logu virs citiem logiem" msgstr "Pacelt logu virs citiem logiem"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Pazemināt logu zem citiem logiem" msgstr "Pazemināt logu zem citiem logiem"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Maksimizēt logu vertikāli" msgstr "Maksimizēt logu vertikāli"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Maksimizēt logu horizontāli" msgstr "Maksimizēt logu horizontāli"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Izvietot kreisajā ekrāna pusē" msgstr "Izvietot kreisajā ekrāna pusē"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Izvietot labajā ekrāna pusē" msgstr "Izvietot labajā ekrāna pusē"
@@ -405,16 +388,6 @@ msgid "Enable experimental features"
msgstr "Ieslēgt eksperimentālās iespējas" msgstr "Ieslēgt eksperimentālās iespējas"
#: data/org.gnome.mutter.gschema.xml.in:108 #: data/org.gnome.mutter.gschema.xml.in:108
#| msgid ""
#| "To enable experimental features, add the feature keyword to the list. "
#| "Whether the feature requires restarting the compositor depends on the "
#| "given feature. Any experimental feature is not required to still be "
#| "available, or configurable. Dont expect adding anything in this setting "
#| "to be future proof. Currently possible keywords: • “scale-monitor-"
#| "framebuffer” — makes mutter default to layout logical monitors in a "
#| "logical pixel coordinate space, while scaling monitor framebuffers "
#| "instead of window content, to manage HiDPI monitors. Does not require a "
#| "restart."
msgid "" msgid ""
"To enable experimental features, add the feature keyword to the list. " "To enable experimental features, add the feature keyword to the list. "
"Whether the feature requires restarting the compositor depends on the given " "Whether the feature requires restarting the compositor depends on the given "
@@ -435,11 +408,10 @@ msgstr ""
"nākotnē strādās. Pašlaik pieejamie atslēgvārdi: • “scale-monitor-" "nākotnē strādās. Pašlaik pieejamie atslēgvārdi: • “scale-monitor-"
"framebuffer” — liek mutter pēc noklusējuma izkārtot loģiskos monitorus " "framebuffer” — liek mutter pēc noklusējuma izkārtot loģiskos monitorus "
"loģisko pikseļu koordināšu telpā, kamēr mērogo monitora kadru buferus, nevis " "loģisko pikseļu koordināšu telpā, kamēr mērogo monitora kadru buferus, nevis "
"loga saturu, lai pārvaldītu HiDPI monitorus. Pārstartēšana nav nepieciešama." "loga saturu, lai pārvaldītu HiDPI monitorus. Pārstartēšana nav nepieciešama. "
" • “remote-desktop” — " "• “remote-desktop” — ieslēdz attālinātās darbvirsmas atbalstu. Lai "
"ieslēdz attālinātās darbvirsmas atbalstu. Lai atbalstītu attālināto" "atbalstītu attālināto darbvirsmu ar ekrāna koplietošanu, jābūt arī ieslēgtam "
" darbvirsmu ar ekrāna koplietošanu, jābūt arī ieslēgtam “screen-cast”. •" "“screen-cast”. • “screen-cast” — ieslēdz ekrānraides atbalstu."
" “screen-cast” — ieslēdz ekrānraides atbalstu."
#: data/org.gnome.mutter.gschema.xml.in:145 #: data/org.gnome.mutter.gschema.xml.in:145
msgid "Select window from tab popup" msgid "Select window from tab popup"
@@ -509,10 +481,55 @@ msgstr "Pārslēgties uz VT 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Atkal ieslēdz saīsnes" msgstr "Atkal ieslēdz saīsnes"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Atļaut Xwayland satvērienus"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Atļaut ņemt vērā tastatūras satveršanu, ko pieprasa X11 lietotnes, kas"
" darbojas Xwayland vidē. Lai ņemtu vērā X11 tvērienus Wayland vidē, klientam"
" arī jāsūta specifisks X11 ClientMessage uz root (saknes) logu, vai arī jābūt"
" lietotņu baltajā sarakstā atslēgā “xwayland-grab-access-rules”."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Xwayland lietotnes, kuras drīkst pieprasīt tastatūras satveršanu"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Saraksts ar resursu nosaukumiem vai resursu klasi X11 logiem, kuri vai nu"
" drīkst, vai nedrīkst pieprasīt X11 tastatūras satveršanu zem Xwayland."
" Resursa nosaukumu vai resursa klasi dotajam X11 logam var iegūt, izmantojot"
" komandu “xprop WM_CLASS”. Vērtībās ir atbalstītas aizstājējzīmes “*” un “?”."
" Vērtības, ka sākas ar “!”, ir melnajā sarakstā, kam ir prioritāte pār balto"
" sarakstu, kad atsauc lietotnes no noklusējuma sistēmas saraksta. Noklusējuma"
" sistēmas sarakstā iekļauj sekojošās lietotnes: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Lietotāji var pārtraukt esošo"
" tvērienu, izmantojot noteiktus tastatūras īsinājumtaustiņus, kas ir noteikti"
" “restore-shortcuts” atslēgā."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Režīma slēdzis (grupa %d)" msgstr "Režīma slēdzis (grupa %d)"
@@ -520,37 +537,37 @@ msgstr "Režīma slēdzis (grupa %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Pārslēgt monitoru" msgstr "Pārslēgt monitoru"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Rādīt palīdzību uz ekrāna" msgstr "Rādīt palīdzību uz ekrāna"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Iebūvēts displejs" msgstr "Iebūvēts displejs"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Nezināms" msgstr "Nezināms"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Nezināms displejs" msgstr "Nezināms displejs"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -565,42 +582,46 @@ msgstr "Zvana notikums"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Neizdevās atvērt X logu sistēmas displeju “%s”\n" msgstr "Neizdevās atvērt X logu sistēmas displeju “%s”\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Deaktivēt savienojumu ar sesiju pārvaldnieku" msgstr "Deaktivēt savienojumu ar sesiju pārvaldnieku"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Aizvietot darbojošos logu pārvaldnieku" msgstr "Aizvietot darbojošos logu pārvaldnieku"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Norādiet sesiju pārvaldības ID" msgstr "Norādiet sesiju pārvaldības ID"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Lietojamais X displejs" msgstr "Lietojamais X displejs"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Inicializēt sesiju no saglabātās datnes" msgstr "Inicializēt sesiju no saglabātās datnes"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Padarīt X izsaukumus sinhronus" msgstr "Padarīt X izsaukumus sinhronus"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Palaist kā wayland kompozitoru" msgstr "Palaist kā wayland kompozitoru"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Palaist kā ligzdotu kompozitoru" msgstr "Palaist kā ligzdotu kompozitoru"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Palaist kā pilnu attēlošanas serveri, nevis iegultu" msgstr "Palaist kā pilnu attēlošanas serveri, nevis iegultu"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Palaist ar X11 aizmuguri"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -655,7 +676,7 @@ msgstr "Izmantojamais mutter spraudnis"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Darbvieta %d" msgstr "Darbvieta %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -664,7 +685,7 @@ msgstr ""
"Displejam “%s” jau ir logu pārvaldnieks; mēģiniet lietot --replace iespēju, " "Displejam “%s” jau ir logu pārvaldnieks; mēģiniet lietot --replace iespēju, "
"lai aizvietotu pašreizējo logu pārvaldnieku." "lai aizvietotu pašreizējo logu pārvaldnieku."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Ekrāna %d displejs “%s“ nav derīgs\n" msgstr "Ekrāna %d displejs “%s“ nav derīgs\n"
@@ -678,7 +699,7 @@ msgstr "Mutter tika kompilēts bez detalizētas izvades režīma atbalsta\n"
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Režīma slēdzis: režīms %d" msgstr "Režīma slēdzis: režīms %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -690,4 +711,3 @@ msgstr ""
#, c-format #, c-format
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (uz %s)" msgstr "%s (uz %s)"

129
po/nb.po
View File

@@ -4,11 +4,10 @@
# #
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter 3.23.x\n" "Project-Id-Version: mutter 3.27.x\n"
"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?product=mutter&keywords=I18N+L10N&component=general\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2017-11-10 18:31+0000\n"
"POT-Creation-Date: 2017-02-16 21:09+0000\n" "PO-Revision-Date: 2017-11-11 18:19+0100\n"
"PO-Revision-Date: 2017-02-19 17:44+0100\n"
"Last-Translator: Kjartan Maraas <kmaraas@gnome.org>\n" "Last-Translator: Kjartan Maraas <kmaraas@gnome.org>\n"
"Language-Team: Norwegian bokmål <i18n-no@lister.ping.uio.no>\n" "Language-Team: Norwegian bokmål <i18n-no@lister.ping.uio.no>\n"
"Language: nb\n" "Language: nb\n"
@@ -168,7 +167,7 @@ msgstr "Flytt til arbeidsområdet over"
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Flytt til arbeidsområdet under" msgstr "Flytt til arbeidsområdet under"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "System" msgstr "System"
@@ -180,6 +179,10 @@ msgstr "Vis kommandolinje"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Vis oversikt over aktiviteter" msgstr "Vis oversikt over aktiviteter"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Gjenopprett tastatursnarveier"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Vinduer" msgstr "Vinduer"
@@ -393,14 +396,41 @@ msgstr ""
"Når denne er «true» vil mye vinduer alltid plasseres midt på aktivt område " "Når denne er «true» vil mye vinduer alltid plasseres midt på aktivt område "
"på skjermen." "på skjermen."
#: data/org.gnome.mutter.gschema.xml.in:120 #: data/org.gnome.mutter.gschema.xml.in:107
msgid "Enable experimental features"
msgstr "Slå på eksperimentelle funksjoner"
#: data/org.gnome.mutter.gschema.xml.in:108
msgid ""
"To enable experimental features, add the feature keyword to the list. "
"Whether the feature requires restarting the compositor depends on the given "
"feature. Any experimental feature is not required to still be available, or "
"configurable. Dont expect adding anything in this setting to be future "
"proof. Currently possible keywords: • “scale-monitor-framebuffer” — makes "
"mutter default to layout logical monitors in a logical pixel coordinate "
"space, while scaling monitor framebuffers instead of window content, to "
"manage HiDPI monitors. Does not require a restart. • “remote-desktop” — "
"enables remote desktop support. To support remote desktop with screen "
"sharing, “screen-cast” must also be enabled. • “screen-cast” — enables "
"screen cast support."
msgstr ""
#: data/org.gnome.mutter.gschema.xml.in:145
msgid "Select window from tab popup" msgid "Select window from tab popup"
msgstr "Fjern vindu fra tabulatordialog" msgstr "Fjern vindu fra tabulatordialog"
#: data/org.gnome.mutter.gschema.xml.in:125 #: data/org.gnome.mutter.gschema.xml.in:150
msgid "Cancel tab popup" msgid "Cancel tab popup"
msgstr "Avbryt tabulatordialog" msgstr "Avbryt tabulatordialog"
#: data/org.gnome.mutter.gschema.xml.in:155
msgid "Switch monitor configurations"
msgstr "Bytt skjermkonfigurasjon"
#: data/org.gnome.mutter.gschema.xml.in:160
msgid "Rotates the built-in monitor configuration"
msgstr "Roterer mellom innebyggede skjermkonfigurasjoner"
#: data/org.gnome.mutter.wayland.gschema.xml.in:6 #: data/org.gnome.mutter.wayland.gschema.xml.in:6
msgid "Switch to VT 1" msgid "Switch to VT 1"
msgstr "Bytt til VT 1" msgstr "Bytt til VT 1"
@@ -449,10 +479,14 @@ msgstr "Bytt til VT 11"
msgid "Switch to VT 12" msgid "Switch to VT 12"
msgstr "Bytt til VT 12" msgstr "Bytt til VT 12"
#: data/org.gnome.mutter.wayland.gschema.xml.in:54
msgid "Re-enable shortcuts"
msgstr "Slå på snarveier igjen"
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:1800 #: src/backends/meta-input-settings.c:2167
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Modusbytte: (Gruppe %d)" msgstr "Modusbytte: (Gruppe %d)"
@@ -460,37 +494,37 @@ msgstr "Modusbytte: (Gruppe %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:1822 #: src/backends/meta-input-settings.c:2190
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Bytt skjerm" msgstr "Bytt skjerm"
#: src/backends/meta-input-settings.c:1824 #: src/backends/meta-input-settings.c:2192
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Vis hjelp på skjermen" msgstr "Vis hjelp på skjermen"
#: src/backends/meta-monitor-manager.c:675 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Innebygget skjerm" msgstr "Innebygget skjerm"
#: src/backends/meta-monitor-manager.c:698 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Ukjent" msgstr "Ukjent"
#: src/backends/meta-monitor-manager.c:700 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Ukjent skjerm" msgstr "Ukjent skjerm"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:708 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:471 #: src/compositor/compositor.c:476
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -500,32 +534,6 @@ msgstr "En annen compositing manager kjører skjerm %i på display «%s»."
msgid "Bell event" msgid "Bell event"
msgstr "Klokkehendelse" msgstr "Klokkehendelse"
#. Translators: %s is a window title
#: src/core/delete.c:127
#, c-format
msgid "“%s” is not responding."
msgstr "«%s» svarer ikke."
#: src/core/delete.c:129
msgid "Application is not responding."
msgstr "Programmet svarer ikke."
#: src/core/delete.c:134
msgid ""
"You may choose to wait a short while for it to continue or force the "
"application to quit entirely."
msgstr ""
"Du kan velge å vente en kort stund for å se om det fortsetter eller tvinge "
"programmet til å avslutte helt."
#: src/core/delete.c:141
msgid "_Force Quit"
msgstr "_Tvungen nedstenging"
#: src/core/delete.c:141
msgid "_Wait"
msgstr "_Vent"
#: src/core/display.c:608 #: src/core/display.c:608
#, c-format #, c-format
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
@@ -567,6 +575,32 @@ msgstr "Kjør som en nøstet kompositør"
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Kjør som en full skjermtjener, heller enn nøstet" msgstr "Kjør som en full skjermtjener, heller enn nøstet"
#. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147
#, c-format
msgid "“%s” is not responding."
msgstr "«%s» svarer ikke."
#: src/core/meta-close-dialog-default.c:149
msgid "Application is not responding."
msgstr "Programmet svarer ikke."
#: src/core/meta-close-dialog-default.c:154
msgid ""
"You may choose to wait a short while for it to continue or force the "
"application to quit entirely."
msgstr ""
"Du kan velge å vente en kort stund for å se om det fortsetter eller tvinge "
"programmet til å avslutte helt."
#: src/core/meta-close-dialog-default.c:161
msgid "_Force Quit"
msgstr "_Tvungen nedstenging"
#: src/core/meta-close-dialog-default.c:161
msgid "_Wait"
msgstr "_Vent"
#: src/core/mutter.c:39 #: src/core/mutter.c:39
#, c-format #, c-format
msgid "" msgid ""
@@ -579,7 +613,8 @@ msgstr ""
"mutter %s\n" "mutter %s\n"
"Opphavsrett © 2001-%d Havoc Pennington, Red Hat, Inc, og andre\n" "Opphavsrett © 2001-%d Havoc Pennington, Red Hat, Inc, og andre\n"
"Dette er fri programvare; se i kildekoden for kopibetingelser.\n" "Dette er fri programvare; se i kildekoden for kopibetingelser.\n"
"Det gis INGEN garanti; ikke en gang for SALGBARHET eller PASSENDE FOR ET BESTEMT FORMÅL.\n" "Det gis INGEN garanti; ikke en gang for SALGBARHET eller PASSENDE FOR ET "
"BESTEMT FORMÅL.\n"
#: src/core/mutter.c:53 #: src/core/mutter.c:53
msgid "Print version" msgid "Print version"
@@ -594,7 +629,7 @@ msgstr "Mutter-tillegg som skal brukes"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Arbeidsområde %d" msgstr "Arbeidsområde %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -603,7 +638,7 @@ msgstr ""
"Skjerm «%s» har allerede en vindushåndterer; prøv å bruke flagget --replace " "Skjerm «%s» har allerede en vindushåndterer; prøv å bruke flagget --replace "
"for å erstatte aktiv vindushåndterer." "for å erstatte aktiv vindushåndterer."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Skjerm %d på display «%s» er ugyldig\n" msgstr "Skjerm %d på display «%s» er ugyldig\n"
@@ -621,7 +656,9 @@ msgstr "Modusbytte: Modus %d"
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
msgstr "Disse vinduene støtter ikke «lagre aktiv konfigurasjon», og vil måtte startes på nytt manuelt neste gang du logger inn." msgstr ""
"Disse vinduene støtter ikke «lagre aktiv konfigurasjon», og vil måtte "
"startes på nytt manuelt neste gang du logger inn."
#: src/x11/window-props.c:559 #: src/x11/window-props.c:559
#, c-format #, c-format

2044
po/ne.po

File diff suppressed because it is too large Load Diff

516
po/nl.po
View File

@@ -5,13 +5,14 @@
# Michiel Sikkes <michiels@gnome.org>, 2005. # Michiel Sikkes <michiels@gnome.org>, 2005.
# Wouter Bolsterlee <wbolster@gnome.org>, 20062012. # Wouter Bolsterlee <wbolster@gnome.org>, 20062012.
# Hannie Dumoleyn <hannie@ubuntu-nl.org>, 2016. # Hannie Dumoleyn <hannie@ubuntu-nl.org>, 2016.
# Nathan Follens <nthn@unseen.is>, 2017.
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter\n" "Project-Id-Version: mutter\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"POT-Creation-Date: 2016-03-23 22:41+0100\n" "POT-Creation-Date: 2018-02-26 07:59+0000\n"
"PO-Revision-Date: 2016-10-17 18:24+0200\n" "PO-Revision-Date: 2018-02-26 22:05+0100\n"
"Last-Translator: Hannie Dumoleyn <hannie@ubuntu-nl.org>\n" "Last-Translator: Justin van Steijn <jvs@fsfe.org>\n"
"Language-Team: Dutch <vertaling@vrijschrift.org>\n" "Language-Team: Dutch <vertaling@vrijschrift.org>\n"
"Language: nl\n" "Language: nl\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
@@ -19,273 +20,257 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n" "Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Project-Style: gnome\n" "X-Project-Style: gnome\n"
"X-Generator: Lokalize 1.5\n" "X-Generator: Poedit 1.8.11\n"
#: ../data/50-mutter-navigation.xml.in.h:1 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
msgstr "Navigatie" msgstr "Navigatie"
#: ../data/50-mutter-navigation.xml.in.h:2 #: data/50-mutter-navigation.xml:9
msgid "Move window to workspace 1" msgid "Move window to workspace 1"
msgstr "Venster verplaatsen naar werkblad 1" msgstr "Venster verplaatsen naar werkblad 1"
#: ../data/50-mutter-navigation.xml.in.h:3 #: data/50-mutter-navigation.xml:12
msgid "Move window to workspace 2" msgid "Move window to workspace 2"
msgstr "Venster verplaatsen naar werkblad 2" msgstr "Venster verplaatsen naar werkblad 2"
#: ../data/50-mutter-navigation.xml.in.h:4 #: data/50-mutter-navigation.xml:15
msgid "Move window to workspace 3" msgid "Move window to workspace 3"
msgstr "Venster verplaatsen naar werkblad 3" msgstr "Venster verplaatsen naar werkblad 3"
#: ../data/50-mutter-navigation.xml.in.h:5 #: data/50-mutter-navigation.xml:18
msgid "Move window to workspace 4" msgid "Move window to workspace 4"
msgstr "Venster verplaatsen naar werkblad 4" msgstr "Venster verplaatsen naar werkblad 4"
#: ../data/50-mutter-navigation.xml.in.h:6 #: data/50-mutter-navigation.xml:21
msgid "Move window to last workspace" msgid "Move window to last workspace"
msgstr "Venster verplaatsen naar laatste werkblad" msgstr "Venster verplaatsen naar laatste werkblad"
#: ../data/50-mutter-navigation.xml.in.h:7 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Venster één werkblad naar links verplaatsen"
#: ../data/50-mutter-navigation.xml.in.h:8
msgid "Move window one workspace to the right"
msgstr "Venster één werkblad naar rechts verplaatsen"
#: ../data/50-mutter-navigation.xml.in.h:9
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Venster één werkblad naar boven verplaatsen" msgstr "Venster één werkblad naar boven verplaatsen"
#: ../data/50-mutter-navigation.xml.in.h:10 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Venster één werkblad naar beneden verplaatsen" msgstr "Venster één werkblad naar beneden verplaatsen"
#: ../data/50-mutter-navigation.xml.in.h:11 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Venster één monitor naar links verplaatsen" msgstr "Venster één monitor naar links verplaatsen"
#: ../data/50-mutter-navigation.xml.in.h:12 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Venster één monitor naar rechts verplaatsen" msgstr "Venster één monitor naar rechts verplaatsen"
#: ../data/50-mutter-navigation.xml.in.h:13 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Venster één monitor naar boven verplaatsen" msgstr "Venster één monitor naar boven verplaatsen"
#: ../data/50-mutter-navigation.xml.in.h:14 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Venster één monitor naar beneden verplaatsen" msgstr "Venster één monitor naar beneden verplaatsen"
#: ../data/50-mutter-navigation.xml.in.h:15 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Tussen toepassingen schakelen" msgstr "Tussen toepassingen schakelen"
#: ../data/50-mutter-navigation.xml.in.h:16 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Schakelen naar vorige toepassing" msgstr "Schakelen naar vorige toepassing"
#: ../data/50-mutter-navigation.xml.in.h:17 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Tussen vensters schakelen" msgstr "Tussen vensters schakelen"
#: ../data/50-mutter-navigation.xml.in.h:18 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Schakelen naar vorig venster" msgstr "Schakelen naar vorig venster"
#: ../data/50-mutter-navigation.xml.in.h:19 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Wisselen van venster binnen een toepassing" msgstr "Wisselen van venster binnen een toepassing"
#: ../data/50-mutter-navigation.xml.in.h:20 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Wisselen naar vorig gebruikte venster van een toepassing" msgstr "Wisselen naar vorig gebruikte venster van een toepassing"
#: ../data/50-mutter-navigation.xml.in.h:21 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Systeemschermen wisselen" msgstr "Systeemschermen wisselen"
#: ../data/50-mutter-navigation.xml.in.h:22 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Schakelen naar vorige systeemregelaar" msgstr "Schakelen naar vorige systeemregelaar"
#: ../data/50-mutter-navigation.xml.in.h:23 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Direct tussen vensters schakelen" msgstr "Direct tussen vensters schakelen"
#: ../data/50-mutter-navigation.xml.in.h:24 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Schakel direct naar vorig venster" msgstr "Schakel direct naar vorig venster"
#: ../data/50-mutter-navigation.xml.in.h:25 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Direct wisselen van venster binnen een toepassing" msgstr "Direct wisselen van venster binnen een toepassing"
#: ../data/50-mutter-navigation.xml.in.h:26 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Direct wisselen naar vorig venster van een toepassing" msgstr "Direct wisselen naar vorig venster van een toepassing"
#: ../data/50-mutter-navigation.xml.in.h:27 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Direct tussen systeemschermen wisselen" msgstr "Direct tussen systeemschermen wisselen"
#: ../data/50-mutter-navigation.xml.in.h:28 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Direct schakelen naar vorige systeemregelaar" msgstr "Direct schakelen naar vorige systeemregelaar"
#: ../data/50-mutter-navigation.xml.in.h:29 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Alle normale vensters verbergen" msgstr "Alle normale vensters verbergen"
#: ../data/50-mutter-navigation.xml.in.h:30 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Schakelen naar werkblad 1" msgstr "Schakelen naar werkblad 1"
#: ../data/50-mutter-navigation.xml.in.h:31 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Schakelen naar werkblad 2" msgstr "Schakelen naar werkblad 2"
#: ../data/50-mutter-navigation.xml.in.h:32 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Schakelen naar werkblad 3" msgstr "Schakelen naar werkblad 3"
#: ../data/50-mutter-navigation.xml.in.h:33 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Schakelen naar werkblad 4" msgstr "Schakelen naar werkblad 4"
#: ../data/50-mutter-navigation.xml.in.h:34 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Overschakelen naar laatste werkblad" msgstr "Overschakelen naar laatste werkblad"
#: ../data/50-mutter-navigation.xml.in.h:35 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Verplaatsen naar werkblad links"
#: ../data/50-mutter-navigation.xml.in.h:36
msgid "Move to workspace right"
msgstr "Verplaatsen naar werkblad rechts"
#: ../data/50-mutter-navigation.xml.in.h:37
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Verplaatsen naar werkblad hierboven" msgstr "Verplaatsen naar werkblad hierboven"
#: ../data/50-mutter-navigation.xml.in.h:38 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Verplaatsen naar werkblad hieronder" msgstr "Verplaatsen naar werkblad hieronder"
#: ../data/50-mutter-system.xml.in.h:1 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Systeem" msgstr "Systeem"
#: ../data/50-mutter-system.xml.in.h:2 #: data/50-mutter-system.xml:8
msgid "Show the run command prompt" msgid "Show the run command prompt"
msgstr "Het opdrachtregelvenster tonen" msgstr "Het opdrachtregelvenster tonen"
#: ../data/50-mutter-system.xml.in.h:3 #: data/50-mutter-system.xml:10
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Het activiteitenoverzicht tonen" msgstr "Het activiteitenoverzicht tonen"
#: ../data/50-mutter-windows.xml.in.h:1 #: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Sneltoetsen opnieuw instellen"
#: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Vensters" msgstr "Vensters"
#: ../data/50-mutter-windows.xml.in.h:2 #: data/50-mutter-windows.xml:8
msgid "Activate the window menu" msgid "Activate the window menu"
msgstr "Venstermenu activeren" msgstr "Venstermenu activeren"
#: ../data/50-mutter-windows.xml.in.h:3 #: data/50-mutter-windows.xml:10
msgid "Toggle fullscreen mode" msgid "Toggle fullscreen mode"
msgstr "Volledig-schermmodus omschakelen" msgstr "Volledig-schermmodus omschakelen"
#: ../data/50-mutter-windows.xml.in.h:4 #: data/50-mutter-windows.xml:12
msgid "Toggle maximization state" msgid "Toggle maximization state"
msgstr "Maximalisatie in- of uitschakelen" msgstr "Maximalisatie in- of uitschakelen"
#: ../data/50-mutter-windows.xml.in.h:5 #: data/50-mutter-windows.xml:14
msgid "Maximize window" msgid "Maximize window"
msgstr "Venster maximaliseren" msgstr "Venster maximaliseren"
#: ../data/50-mutter-windows.xml.in.h:6 #: data/50-mutter-windows.xml:16
msgid "Restore window" msgid "Restore window"
msgstr "Venster herstellen" msgstr "Venster herstellen"
#: ../data/50-mutter-windows.xml.in.h:7 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Oprollen in- of uitschakelen"
#: ../data/50-mutter-windows.xml.in.h:8
msgid "Close window" msgid "Close window"
msgstr "Venster sluiten" msgstr "Venster sluiten"
#: ../data/50-mutter-windows.xml.in.h:9 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Venster verbergen" msgstr "Venster verbergen"
#: ../data/50-mutter-windows.xml.in.h:10 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Venster verplaatsen" msgstr "Venster verplaatsen"
#: ../data/50-mutter-windows.xml.in.h:11 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Vensterafmetingen veranderen" msgstr "Vensterafmetingen veranderen"
#: ../data/50-mutter-windows.xml.in.h:12 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Schakelen tussen venster op alle werkbladen zichtbaar of op één" msgstr "Schakelen tussen venster op alle werkbladen zichtbaar of op één"
#: ../data/50-mutter-windows.xml.in.h:13 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Vensters naar voren halen indien bedekt of anders naar achter brengen" msgstr "Vensters naar voren halen indien bedekt of anders naar achter brengen"
#: ../data/50-mutter-windows.xml.in.h:14 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Venster voor andere vensters halen" msgstr "Venster voor andere vensters halen"
#: ../data/50-mutter-windows.xml.in.h:15 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Venster achter andere vensters brengen" msgstr "Venster achter andere vensters brengen"
#: ../data/50-mutter-windows.xml.in.h:16 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Venster verticaal maximaliseren" msgstr "Venster verticaal maximaliseren"
#: ../data/50-mutter-windows.xml.in.h:17 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Venster horizontaal maximaliseren" msgstr "Venster horizontaal maximaliseren"
#: ../data/50-mutter-windows.xml.in.h:18 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Weergave gesplitst op links" msgstr "Weergave gesplitst op links"
#: ../data/50-mutter-windows.xml.in.h:19 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Weergave gesplitst op rechts" msgstr "Weergave gesplitst op rechts"
#: ../data/mutter.desktop.in.h:1 #: data/mutter.desktop.in:4
msgid "Mutter" msgid "Mutter"
msgstr "Mutter" msgstr "Mutter"
#: ../data/org.gnome.mutter.gschema.xml.in.h:1 #: data/org.gnome.mutter.gschema.xml.in:7
msgid "Modifier to use for extended window management operations" msgid "Modifier to use for extended window management operations"
msgstr "Controletoets voor uitgebreide vensterbeheerfunctionaliteit" msgstr "Controletoets voor uitgebreide vensterbeheerfunctionaliteit"
#: ../data/org.gnome.mutter.gschema.xml.in.h:2 #: data/org.gnome.mutter.gschema.xml.in:8
msgid "" msgid ""
"This key will initiate the \"overlay\", which is a combination window " "This key will initiate the overlay, which is a combination window overview "
"overview and application launching system. The default is intended to be the " "and application launching system. The default is intended to be the “Windows "
"\"Windows key\" on PC hardware. It's expected that this binding either the " "key on PC hardware. Its expected that this binding either the default or "
"default or set to the empty string." "set to the empty string."
msgstr "" msgstr ""
"Deze sleutel activeert de overlay, een combinatie van een vensteroverzicht " "Deze sleutel activeert de overlay, een combinatie van een vensteroverzicht "
"en een systeem om toepassingen te starten. Standaard is dit de Windows-" "en een systeem om toepassingen te starten. Standaard is dit de Windows-"
"toets en de bedoeling is dat deze sneltoets ofwel de standaardwaarde bevat " "toets en de bedoeling is dat deze sneltoets ofwel de standaardwaarde bevat "
"ofwel leeggemaakt is." "ofwel leeggemaakt is."
#: ../data/org.gnome.mutter.gschema.xml.in.h:3 #: data/org.gnome.mutter.gschema.xml.in:20
msgid "Attach modal dialogs" msgid "Attach modal dialogs"
msgstr "Blokkerende dialoogvensters vastmaken" msgstr "Blokkerende dialoogvensters vastmaken"
#: ../data/org.gnome.mutter.gschema.xml.in.h:4 #: data/org.gnome.mutter.gschema.xml.in:21
msgid "" msgid ""
"When true, instead of having independent titlebars, modal dialogs appear " "When true, instead of having independent titlebars, modal dialogs appear "
"attached to the titlebar of the parent window and are moved together with " "attached to the titlebar of the parent window and are moved together with "
@@ -295,28 +280,28 @@ msgstr ""
"maar vastgekoppeld aan het achterliggende venster en bewegen daardoor ook " "maar vastgekoppeld aan het achterliggende venster en bewegen daardoor ook "
"mee met het achterliggende venster." "mee met het achterliggende venster."
#: ../data/org.gnome.mutter.gschema.xml.in.h:5 #: data/org.gnome.mutter.gschema.xml.in:30
msgid "Enable edge tiling when dropping windows on screen edges" msgid "Enable edge tiling when dropping windows on screen edges"
msgstr "Randtegels inschakelen bij het slepen van vensters naar schermranden" msgstr "Randtegels inschakelen bij het slepen van vensters naar schermranden"
#: ../data/org.gnome.mutter.gschema.xml.in.h:6 #: data/org.gnome.mutter.gschema.xml.in:31
msgid "" msgid ""
"If enabled, dropping windows on vertical screen edges maximizes them " "If enabled, dropping windows on vertical screen edges maximizes them "
"vertically and resizes them horizontally to cover half of the available " "vertically and resizes them horizontally to cover half of the available "
"area. Dropping windows on the top screen edge maximizes them completely." "area. Dropping windows on the top screen edge maximizes them completely."
msgstr "" msgstr ""
"Indien ingeschakeld dan zal het laten vallen van vensters op verticale " "Indien ingeschakeld, zal het laten vallen van vensters op verticale "
"schermranden ze verticaal maximaliseren en horizontaal op halve " "schermranden ze verticaal maximaliseren en horizontaal op halve "
"schermgrootte brengen. Het laten vallen van vensters op de bovenrand van het " "schermgrootte brengen. Het laten vallen van vensters op de bovenrand van het "
"scherm maximaliseert ze helemaal. " "scherm maximaliseert ze helemaal."
#: ../data/org.gnome.mutter.gschema.xml.in.h:7 #: data/org.gnome.mutter.gschema.xml.in:40
msgid "Workspaces are managed dynamically" msgid "Workspaces are managed dynamically"
msgstr "Werkbladen worden dynamisch beheerd" msgstr "Werkbladen worden dynamisch beheerd"
#: ../data/org.gnome.mutter.gschema.xml.in.h:8 #: data/org.gnome.mutter.gschema.xml.in:41
msgid "" msgid ""
"Determines whether workspaces are managed dynamically or whether there's a " "Determines whether workspaces are managed dynamically or whether theres a "
"static number of workspaces (determined by the num-workspaces key in org." "static number of workspaces (determined by the num-workspaces key in org."
"gnome.desktop.wm.preferences)." "gnome.desktop.wm.preferences)."
msgstr "" msgstr ""
@@ -324,11 +309,11 @@ msgstr ""
"werkbladen is (gegeven door de sleutel num-workspaces in org.gnome.desktop." "werkbladen is (gegeven door de sleutel num-workspaces in org.gnome.desktop."
"wm.preferences)." "wm.preferences)."
#: ../data/org.gnome.mutter.gschema.xml.in.h:9 #: data/org.gnome.mutter.gschema.xml.in:50
msgid "Workspaces only on primary" msgid "Workspaces only on primary"
msgstr "Werkbladen alleen voor primaire venster" msgstr "Werkbladen alleen voor primaire venster"
#: ../data/org.gnome.mutter.gschema.xml.in.h:10 #: data/org.gnome.mutter.gschema.xml.in:51
msgid "" msgid ""
"Determines whether workspace switching should happen for windows on all " "Determines whether workspace switching should happen for windows on all "
"monitors or only for windows on the primary monitor." "monitors or only for windows on the primary monitor."
@@ -336,11 +321,11 @@ msgstr ""
"Geeft aan of wisselen van werkblad voor vensters op alle schermen of alleen " "Geeft aan of wisselen van werkblad voor vensters op alle schermen of alleen "
"voor vensters op het hoofdscherm moet gebeuren." "voor vensters op het hoofdscherm moet gebeuren."
#: ../data/org.gnome.mutter.gschema.xml.in.h:11 #: data/org.gnome.mutter.gschema.xml.in:59
msgid "No tab popup" msgid "No tab popup"
msgstr "Geen tab-pop-up" msgstr "Geen tab-pop-up"
#: ../data/org.gnome.mutter.gschema.xml.in.h:12 #: data/org.gnome.mutter.gschema.xml.in:60
msgid "" msgid ""
"Determines whether the use of popup and highlight frame should be disabled " "Determines whether the use of popup and highlight frame should be disabled "
"for window cycling." "for window cycling."
@@ -348,38 +333,38 @@ msgstr ""
"Bepaalt of het gebruik van pop-up en markering van het kader uitgeschakeld " "Bepaalt of het gebruik van pop-up en markering van het kader uitgeschakeld "
"wordt voor het vensterbladeren." "wordt voor het vensterbladeren."
#: ../data/org.gnome.mutter.gschema.xml.in.h:13 #: data/org.gnome.mutter.gschema.xml.in:68
msgid "Delay focus changes until the pointer stops moving" msgid "Delay focus changes until the pointer stops moving"
msgstr "Aandacht vertragen totdat de muispijl stopt met bewegen" msgstr "Aandacht vertragen totdat de muispijl stopt met bewegen"
#: ../data/org.gnome.mutter.gschema.xml.in.h:14 #: data/org.gnome.mutter.gschema.xml.in:69
msgid "" msgid ""
"If set to true, and the focus mode is either \"sloppy\" or \"mouse\" then " "If set to true, and the focus mode is either sloppy or mouse then the "
"the focus will not be changed immediately when entering a window, but only " "focus will not be changed immediately when entering a window, but only after "
"after the pointer stops moving." "the pointer stops moving."
msgstr "" msgstr ""
"Indien op true ingesteld en de aandachtsmodus is ofwel sloppy of " "Indien op true ingesteld en de aandachtsmodus is ofwel sloppy of "
"mouse, dan zal de aandacht niet direct veranderd worden bij het binnengaan " "mouse, dan zal de aandacht niet direct veranderd worden bij het binnengaan "
"van een venster, maar slechts wanneer de muispijl stopt met bewegen." "van een venster, maar slechts wanneer de muispijl stopt met bewegen."
#: ../data/org.gnome.mutter.gschema.xml.in.h:15 #: data/org.gnome.mutter.gschema.xml.in:79
msgid "Draggable border width" msgid "Draggable border width"
msgstr "Sleepbare randbreedte" msgstr "Sleepbare randbreedte"
#: ../data/org.gnome.mutter.gschema.xml.in.h:16 #: data/org.gnome.mutter.gschema.xml.in:80
msgid "" msgid ""
"The amount of total draggable borders. If the theme's visible borders are " "The amount of total draggable borders. If the themes visible borders are "
"not enough, invisible borders will be added to meet this value." "not enough, invisible borders will be added to meet this value."
msgstr "" msgstr ""
"Het totaal aantal sleepbare randen. Als de zichtbare randen in het thema " "Het totaal aantal sleepbare randen. Als de zichtbare randen in het thema "
"onvoldoende zijn, worden onzichtbare randen toegevoegd om deze waarde te " "onvoldoende zijn, worden onzichtbare randen toegevoegd om deze waarde te "
"bereiken." "bereiken."
#: ../data/org.gnome.mutter.gschema.xml.in.h:17 #: data/org.gnome.mutter.gschema.xml.in:89
msgid "Auto maximize nearly monitor sized windows" msgid "Auto maximize nearly monitor sized windows"
msgstr "Vensters van bijna-monitorformaat auto-maximaliseren" msgstr "Vensters van bijna-monitorformaat auto-maximaliseren"
#: ../data/org.gnome.mutter.gschema.xml.in.h:18 #: data/org.gnome.mutter.gschema.xml.in:90
msgid "" msgid ""
"If enabled, new windows that are initially the size of the monitor " "If enabled, new windows that are initially the size of the monitor "
"automatically get maximized." "automatically get maximized."
@@ -387,11 +372,11 @@ msgstr ""
"Indien ingeschakeld, worden vensters die initieel ongeveer even groot zijn " "Indien ingeschakeld, worden vensters die initieel ongeveer even groot zijn "
"als de monitor automatisch gemaximaliseerd." "als de monitor automatisch gemaximaliseerd."
#: ../data/org.gnome.mutter.gschema.xml.in.h:19 #: data/org.gnome.mutter.gschema.xml.in:98
msgid "Place new windows in the center" msgid "Place new windows in the center"
msgstr "Plaats nieuwe vensters in het midden" msgstr "Plaats nieuwe vensters in het midden"
#: ../data/org.gnome.mutter.gschema.xml.in.h:20 #: data/org.gnome.mutter.gschema.xml.in:99
msgid "" msgid ""
"When true, the new windows will always be put in the center of the active " "When true, the new windows will always be put in the center of the active "
"screen of the monitor." "screen of the monitor."
@@ -399,107 +384,251 @@ msgstr ""
"Indien waar zullen nieuwe vensters steeds in het midden van het actieve " "Indien waar zullen nieuwe vensters steeds in het midden van het actieve "
"scherm van de monitor geplaatst worden." "scherm van de monitor geplaatst worden."
#: ../data/org.gnome.mutter.gschema.xml.in.h:21 #: data/org.gnome.mutter.gschema.xml.in:107
msgid "Enable experimental features"
msgstr "Experimentele functies inschakelen"
#: data/org.gnome.mutter.gschema.xml.in:108
msgid ""
"To enable experimental features, add the feature keyword to the list. "
"Whether the feature requires restarting the compositor depends on the given "
"feature. Any experimental feature is not required to still be available, or "
"configurable. Dont expect adding anything in this setting to be future "
"proof. Currently possible keywords: • “scale-monitor-framebuffer” — makes "
"mutter default to layout logical monitors in a logical pixel coordinate "
"space, while scaling monitor framebuffers instead of window content, to "
"manage HiDPI monitors. Does not require a restart. • “remote-desktop” — "
"enables remote desktop support. To support remote desktop with screen "
"sharing, “screen-cast” must also be enabled. • “screen-cast” — enables "
"screen cast support."
msgstr ""
"Voeg het sleutelwoord van een experimentele functie toe aan de lijst om deze "
"in te schakelen. Of de compositor herstart moet worden vooraleer de functie "
"gebruikt kan worden is afhankelijk van de functie. Experimentele functies "
"die u aan deze lijst toevoegt kunnen op een later moment weer verwijderd of "
"op een andere manier ingesteld worden, waardoor het mogelijk is dat ze dan "
"niet meer werken. Momenteel bruikbare sleutelwoorden: • scale-monitor-"
"framebuffer — zorgt dat mutter standaard logische beeldschermen indeelt in "
"een logische pixelcoördinaatruimte, en beeldschermframebuffers schaalt in "
"plaats van vensterinhoud, om HiDPI-beeldschermen te beheren. Hiervoor is "
"opnieuw opstarten niet vereist. • remote-desktop — schakelt ondersteuning "
"voor bureaubladen op afstand in. Om extern bureaublad met scherm delen in te "
"schakelen, moet screen-cast ook ingeschakeld zijn. • screen-cast — "
"schakelt ondersteuning voor casten van scherm in."
#: data/org.gnome.mutter.gschema.xml.in:145
msgid "Select window from tab popup" msgid "Select window from tab popup"
msgstr "Venster selecteren uit tab-pop-up" msgstr "Venster selecteren uit tab-pop-up"
#: ../data/org.gnome.mutter.gschema.xml.in.h:22 #: data/org.gnome.mutter.gschema.xml.in:150
msgid "Cancel tab popup" msgid "Cancel tab popup"
msgstr "Tab-pop-up annuleren" msgstr "Tab-pop-up annuleren"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:1 #: data/org.gnome.mutter.gschema.xml.in:155
msgid "Switch monitor configurations"
msgstr "Tussen beeldschermconfiguraties schakelen"
#: data/org.gnome.mutter.gschema.xml.in:160
msgid "Rotates the built-in monitor configuration"
msgstr "Roteert de ingebouwde beeldschermconfiguratie"
#: data/org.gnome.mutter.wayland.gschema.xml.in:6
msgid "Switch to VT 1" msgid "Switch to VT 1"
msgstr "Schakelen naar VT 1" msgstr "Schakelen naar VT 1"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:2 #: data/org.gnome.mutter.wayland.gschema.xml.in:10
msgid "Switch to VT 2" msgid "Switch to VT 2"
msgstr "Schakelen naar VT 2" msgstr "Schakelen naar VT 2"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:3 #: data/org.gnome.mutter.wayland.gschema.xml.in:14
msgid "Switch to VT 3" msgid "Switch to VT 3"
msgstr "Schakelen naar VT 3" msgstr "Schakelen naar VT 3"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:4 #: data/org.gnome.mutter.wayland.gschema.xml.in:18
msgid "Switch to VT 4" msgid "Switch to VT 4"
msgstr "Schakelen naar VT 4" msgstr "Schakelen naar VT 4"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:5 #: data/org.gnome.mutter.wayland.gschema.xml.in:22
msgid "Switch to VT 5" msgid "Switch to VT 5"
msgstr "Schakelen naar VT 5" msgstr "Schakelen naar VT 5"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:6 #: data/org.gnome.mutter.wayland.gschema.xml.in:26
msgid "Switch to VT 6" msgid "Switch to VT 6"
msgstr "Schakelen naar VT 6" msgstr "Schakelen naar VT 6"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:7 #: data/org.gnome.mutter.wayland.gschema.xml.in:30
msgid "Switch to VT 7" msgid "Switch to VT 7"
msgstr "Schakelen naar VT 7" msgstr "Schakelen naar VT 7"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:8 #: data/org.gnome.mutter.wayland.gschema.xml.in:34
msgid "Switch to VT 8" msgid "Switch to VT 8"
msgstr "Schakelen naar VT 8" msgstr "Schakelen naar VT 8"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:9 #: data/org.gnome.mutter.wayland.gschema.xml.in:38
msgid "Switch to VT 9" msgid "Switch to VT 9"
msgstr "Schakelen naar VT 9" msgstr "Schakelen naar VT 9"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:10 #: data/org.gnome.mutter.wayland.gschema.xml.in:42
msgid "Switch to VT 10" msgid "Switch to VT 10"
msgstr "Schakelen naar VT 10" msgstr "Schakelen naar VT 10"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:11 #: data/org.gnome.mutter.wayland.gschema.xml.in:46
msgid "Switch to VT 11" msgid "Switch to VT 11"
msgstr "Schakelen naar VT 11" msgstr "Schakelen naar VT 11"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:12 #: data/org.gnome.mutter.wayland.gschema.xml.in:50
msgid "Switch to VT 12" msgid "Switch to VT 12"
msgstr "Schakelen naar VT 12" msgstr "Schakelen naar VT 12"
#: ../src/backends/meta-monitor-manager.c:518 #: data/org.gnome.mutter.wayland.gschema.xml.in:54
msgid "Re-enable shortcuts"
msgstr "Sneltoetsen opnieuw inschakelen"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Grabs met Xwayland toestaan"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Toestaan dat rekening wordt gehouden met toetsenbord-grabs door X11-"
"toepassingen die in Xwayland draaien. Om rekening te houden met een X11-grab "
"onder Wayland, moet de client ook: óf een specifieke X11-ClientMessage naar "
"het root-venster sturen, óf vermeld staan in de witte lijst van toepassingen "
"in de sleutel xwayland-grab-access-rules."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Xwayland-toepassingen mogen toetsenbord-grabs doen"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
#. TRANSLATORS: This string refers to a button that switches between
#. * different modes.
#.
#: src/backends/meta-input-settings.c:2325
#, c-format
msgid "Mode Switch (Group %d)"
msgstr "Moduswisselaar (groep %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs.
#.
#: src/backends/meta-input-settings.c:2348
msgid "Switch monitor"
msgstr "Van beeldscherm wisselen"
#: src/backends/meta-input-settings.c:2350
msgid "Show on-screen help"
msgstr "Hulptekst op scherm tonen"
#: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Ingebouwd beeldscherm" msgstr "Ingebouwd beeldscherm"
#: ../src/backends/meta-monitor-manager.c:544 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Onbekend" msgstr "Onbekend"
#: ../src/backends/meta-monitor-manager.c:546 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Onbekend beeldscherm" msgstr "Onbekend beeldscherm"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: ../src/backends/meta-monitor-manager.c:554 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: ../src/compositor/compositor.c:456 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display \"%s" "Another compositing manager is already running on screen %i on display “%s”."
"\"."
msgstr "" msgstr ""
"Er is al een andere compositing manager actief op scherm %i van " "Er is al een andere compositing manager actief op scherm %i van "
"beeldscherm %s." "beeldscherm %s."
#: ../src/core/bell.c:194 #: src/core/bell.c:194
msgid "Bell event" msgid "Bell event"
msgstr "Bel-gebeurtenis" msgstr "Bel-gebeurtenis"
#: ../src/core/delete.c:127 #: src/core/display.c:608
#, c-format
msgid "Failed to open X Window System display “%s”\n"
msgstr "Openen van X Window System display %s mislukt\n"
#: src/core/main.c:190
msgid "Disable connection to session manager"
msgstr "Schakel de verbinding met het sessiebeheer uit"
#: src/core/main.c:196
msgid "Replace the running window manager"
msgstr "De huidige toepassing voor vensterbeheer vervangen"
#: src/core/main.c:202
msgid "Specify session management ID"
msgstr "Specificeer de ID van het sessiebeheer"
#: src/core/main.c:207
msgid "X Display to use"
msgstr "De te gebruiken X-weergave"
#: src/core/main.c:213
msgid "Initialize session from savefile"
msgstr "Initialiseer de sessie middels een opslagbestand"
#: src/core/main.c:219
msgid "Make X calls synchronous"
msgstr "X-aanroepen synchroon maken"
#: src/core/main.c:226
msgid "Run as a wayland compositor"
msgstr "Uitvoeren als een wayland compositor"
#: src/core/main.c:232
msgid "Run as a nested compositor"
msgstr "Uitvoeren als een geneste compositor"
#: src/core/main.c:240
msgid "Run as a full display server, rather than nested"
msgstr "Uitvoeren als een volledige displayserver, in plaats van genest"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Uitvoeren met X11-backend"
#. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
msgid "“%s” is not responding." msgid "“%s” is not responding."
msgstr "%s reageert niet." msgstr "%s reageert niet."
#: ../src/core/delete.c:129 #: src/core/meta-close-dialog-default.c:149
msgid "Application is not responding." msgid "Application is not responding."
msgstr "De toepassing reageert niet." msgstr "De toepassing reageert niet."
#: ../src/core/delete.c:134 #: src/core/meta-close-dialog-default.c:154
msgid "" msgid ""
"You may choose to wait a short while for it to continue or force the " "You may choose to wait a short while for it to continue or force the "
"application to quit entirely." "application to quit entirely."
@@ -507,60 +636,19 @@ msgstr ""
"U kunt ervoor kiezen even te wachten totdat het doorgaat of de toepassing " "U kunt ervoor kiezen even te wachten totdat het doorgaat of de toepassing "
"dwingen om helemaal af te sluiten." "dwingen om helemaal af te sluiten."
#: ../src/core/delete.c:141 #: src/core/meta-close-dialog-default.c:161
msgid "_Wait"
msgstr "_Wachten"
#: ../src/core/delete.c:141
msgid "_Force Quit" msgid "_Force Quit"
msgstr "Ge_forceerd afsluiten" msgstr "Ge_forceerd afsluiten"
#: ../src/core/display.c:555 #: src/core/meta-close-dialog-default.c:161
#, c-format msgid "_Wait"
msgid "Failed to open X Window System display '%s'\n" msgstr "_Wachten"
msgstr "Openen van X Window System display '%s' mislukt\n"
#: ../src/core/main.c:181 #: src/core/mutter.c:39
msgid "Disable connection to session manager"
msgstr "Schakel de verbinding met het sessiebeheer uit"
#: ../src/core/main.c:187
msgid "Replace the running window manager"
msgstr "De huidige toepassing voor vensterbeheer vervangen"
#: ../src/core/main.c:193
msgid "Specify session management ID"
msgstr "Specificeer de ID van het sessiebeheer"
#: ../src/core/main.c:198
msgid "X Display to use"
msgstr "De te gebruiken X-weergave"
#: ../src/core/main.c:204
msgid "Initialize session from savefile"
msgstr "Initialiseer de sessie middels een opslagbestand"
#: ../src/core/main.c:210
msgid "Make X calls synchronous"
msgstr "X-aanroepen synchroon maken"
#: ../src/core/main.c:217
msgid "Run as a wayland compositor"
msgstr "Uitvoeren als een wayland compositor"
#: ../src/core/main.c:223
msgid "Run as a nested compositor"
msgstr "Uitvoeren als een geneste compositor"
#: ../src/core/main.c:231
msgid "Run as a full display server, rather than nested"
msgstr "Uitvoeren als een volledige display server, in plaats van genest"
#: ../src/core/mutter.c:39
#, c-format #, c-format
msgid "" msgid ""
"mutter %s\n" "mutter %s\n"
"Copyright (C) 2001-%d Havoc Pennington, Red Hat, Inc., and others\n" "Copyright © 2001-%d Havoc Pennington, Red Hat, Inc., and others\n"
"This is free software; see the source for copying conditions.\n" "This is free software; see the source for copying conditions.\n"
"There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A " "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A "
"PARTICULAR PURPOSE.\n" "PARTICULAR PURPOSE.\n"
@@ -571,50 +659,70 @@ msgstr ""
"Er is GEEN garantie; zelfs niet voor VERKOOPBAARHEID of GESCHIKTHEID VOOR " "Er is GEEN garantie; zelfs niet voor VERKOOPBAARHEID of GESCHIKTHEID VOOR "
"EEN BEPAALD DOEL.\n" "EEN BEPAALD DOEL.\n"
#: ../src/core/mutter.c:53 #: src/core/mutter.c:53
msgid "Print version" msgid "Print version"
msgstr "Versie-informatie tonen" msgstr "Versie-informatie tonen"
#: ../src/core/mutter.c:59 #: src/core/mutter.c:59
msgid "Mutter plugin to use" msgid "Mutter plugin to use"
msgstr "Te gebruiken Mutter-plug-in" msgstr "Te gebruiken Mutter-plug-in"
#: ../src/core/prefs.c:1997 #: src/core/prefs.c:1997
#, c-format #, c-format
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Werkblad %d" msgstr "Werkblad %d"
#: ../src/core/screen.c:521 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display \"%s\" already has a window manager; try using the --replace option " "Display “%s” already has a window manager; try using the --replace option to "
"to replace the current window manager." "replace the current window manager."
msgstr "" msgstr ""
"Beeldscherm %s heeft al een window manager; probeer de optie: --replace te " "Beeldscherm %s heeft al een vensterbeheerder; probeer de optie: --replace "
"gebruiken om de huidige window manager te vervangen." "te gebruiken om de huidige vensterbeheerder te vervangen."
#: ../src/core/screen.c:603 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display '%s' is invalid\n" msgid "Screen %d on display %s is invalid\n"
msgstr "Scherm %d op beeldscherm '%s' is ongeldig\n" msgstr "Scherm %d op beeldscherm %s is ongeldig\n"
#: ../src/core/util.c:121 #: src/core/util.c:120
msgid "Mutter was compiled without support for verbose mode\n" msgid "Mutter was compiled without support for verbose mode\n"
msgstr "Mutter is gecompileerd zonder ondersteuning voor verbose-mode\n" msgstr "Mutter is gecompileerd zonder ondersteuning voor verbose-mode\n"
#: ../src/x11/session.c:1815 #: src/wayland/meta-wayland-tablet-pad.c:567
#, c-format
msgid "Mode Switch: Mode %d"
msgstr "Moduswisselaar: modus %d"
#: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support &quot;save current setup&quot; and will have to " "These windows do not support save current setup and will have to be "
"be restarted manually next time you log in." "restarted manually next time you log in."
msgstr "" msgstr ""
"Deze vensters ondersteunen het opslaan van de huidige instellingen niet en " "Deze vensters ondersteunen het opslaan van de huidige instellingen niet en "
"zullen bij een volgende sessie opnieuw moeten worden opgestart." "zullen bij een volgende sessie opnieuw moeten worden opgestart."
#: ../src/x11/window-props.c:549 #: src/x11/window-props.c:559
#, c-format #, c-format
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (op %s)" msgstr "%s (op %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Venster één werkblad naar links verplaatsen"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Venster één werkblad naar rechts verplaatsen"
#~ msgid "Move to workspace left"
#~ msgstr "Verplaatsen naar werkblad links"
#~ msgid "Move to workspace right"
#~ msgstr "Verplaatsen naar werkblad rechts"
#~ msgid "Toggle shaded state"
#~ msgstr "Oprollen in- of uitschakelen"
#~ msgid "background texture could not be created from file" #~ msgid "background texture could not be created from file"
#~ msgstr "aanmaken achtergrondstructuur uit bestand mislukt" #~ msgstr "aanmaken achtergrondstructuur uit bestand mislukt"

208
po/pl.po
View File

@@ -1,21 +1,20 @@
# Polish translation for mutter. # Polish translation for mutter.
# Copyright © 2002-2017 the mutter authors. # Copyright © 2002-2018 the mutter authors.
# This file is distributed under the same license as the mutter package. # This file is distributed under the same license as the mutter package.
# Zbigniew Chyla <chyla@alice.ci.pwr.wroc.pl>, 2002-2003. # Zbigniew Chyla <chyla@alice.ci.pwr.wroc.pl>, 2002-2003.
# Artur Flinta <aflinta@at.kernel.pl>, 2003-2005. # Artur Flinta <aflinta@at.kernel.pl>, 2003-2005.
# Marek Stępień <marcoos@aviary.pl>, 2007. # Marek Stępień <marcoos@aviary.pl>, 2007.
# Wadim Dziedzic <wdziedzic@aviary.pl>, 2007. # Wadim Dziedzic <wdziedzic@aviary.pl>, 2007.
# Tomasz Dominikowski <dominikowski@gmail.com>, 2008-2009. # Tomasz Dominikowski <dominikowski@gmail.com>, 2008-2009.
# Piotr Drąg <piotrdrag@gmail.com>, 2010-2017. # Piotr Drąg <piotrdrag@gmail.com>, 2010-2018.
# Aviary.pl <community-poland@mozilla.org>, 2007-2017. # Aviary.pl <community-poland@mozilla.org>, 2007-2018.
# #
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter\n" "Project-Id-Version: mutter\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-06 04:14+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-02-08 02:05+0100\n"
"PO-Revision-Date: 2017-08-29 18:14+0200\n"
"Last-Translator: Piotr Drąg <piotrdrag@gmail.com>\n" "Last-Translator: Piotr Drąg <piotrdrag@gmail.com>\n"
"Language-Team: Polish <community-poland@mozilla.org>\n" "Language-Team: Polish <community-poland@mozilla.org>\n"
"Language: pl\n" "Language: pl\n"
@@ -50,134 +49,118 @@ msgid "Move window to last workspace"
msgstr "Przeniesienie okna na ostatni obszar roboczy" msgstr "Przeniesienie okna na ostatni obszar roboczy"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Przeniesienie okna o obszar roboczy w lewo"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Przeniesienie okna o obszar roboczy w prawo"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Przeniesienie okna o obszar roboczy w górę" msgstr "Przeniesienie okna o obszar roboczy w górę"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Przeniesienie okna o obszar roboczy w dół" msgstr "Przeniesienie okna o obszar roboczy w dół"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Przeniesienie okna na monitor po lewej" msgstr "Przeniesienie okna na monitor po lewej"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Przeniesienie okna na monitor po prawej" msgstr "Przeniesienie okna na monitor po prawej"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Przeniesienie okna na monitor na górze" msgstr "Przeniesienie okna na monitor na górze"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Przeniesienie okna na monitor na dole" msgstr "Przeniesienie okna na monitor na dole"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Przełączenie programów" msgstr "Przełączenie programów"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Przełączenie na poprzedni program" msgstr "Przełączenie na poprzedni program"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Przełączenie okien" msgstr "Przełączenie okien"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Przełączenie na poprzednie okno" msgstr "Przełączenie na poprzednie okno"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Przełączenie między oknami programu" msgstr "Przełączenie między oknami programu"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Przełączenie na poprzednie okno programu" msgstr "Przełączenie na poprzednie okno programu"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Przełączenie kontroli systemowej" msgstr "Przełączenie kontroli systemowej"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Przełączenie na poprzednią kontrolę systemową" msgstr "Przełączenie na poprzednią kontrolę systemową"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Bezpośrednie przełączenie między oknami" msgstr "Bezpośrednie przełączenie między oknami"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Bezpośrednie przełączenie na poprzednie okno" msgstr "Bezpośrednie przełączenie na poprzednie okno"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Bezpośrednie przełączenie między oknami programu" msgstr "Bezpośrednie przełączenie między oknami programu"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Bezpośrednie przełączenie na poprzednie okno programu" msgstr "Bezpośrednie przełączenie na poprzednie okno programu"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Bezpośrednie przełączenie kontroli systemowej" msgstr "Bezpośrednie przełączenie kontroli systemowej"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Bezpośrednie przełączenie na poprzednią kontrolę systemową" msgstr "Bezpośrednie przełączenie na poprzednią kontrolę systemową"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Ukrycie wszystkich zwykłych okien" msgstr "Ukrycie wszystkich zwykłych okien"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Przełączenie na 1. obszar roboczy" msgstr "Przełączenie na 1. obszar roboczy"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Przełączenie na 2. obszar roboczy" msgstr "Przełączenie na 2. obszar roboczy"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Przełączenie na 3. obszar roboczy" msgstr "Przełączenie na 3. obszar roboczy"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Przełączenie na 4. obszar roboczy" msgstr "Przełączenie na 4. obszar roboczy"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Przełączenie na ostatni obszar roboczy" msgstr "Przełączenie na ostatni obszar roboczy"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Przeniesienie na lewy obszar roboczy"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Przeniesienie na prawy obszar roboczy"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Przeniesienie na górny obszar roboczy" msgstr "Przeniesienie na górny obszar roboczy"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Przeniesienie na dolny obszar roboczy" msgstr "Przeniesienie na dolny obszar roboczy"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "System" msgstr "System"
@@ -189,6 +172,10 @@ msgstr "Wyświetlenie okna wykonania polecenia"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Wyświetlenie podglądu aktywności" msgstr "Wyświetlenie podglądu aktywności"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Przywrócenie skrótów klawiszowych"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Okna" msgstr "Okna"
@@ -214,56 +201,52 @@ msgid "Restore window"
msgstr "Przywrócenie okna" msgstr "Przywrócenie okna"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Przełączenie trybu zwinięcia"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Zamknięcie okna" msgstr "Zamknięcie okna"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Ukrycie okna" msgstr "Ukrycie okna"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Przeniesienie okna" msgstr "Przeniesienie okna"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Zmiana rozmiaru okna" msgstr "Zmiana rozmiaru okna"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "" msgstr ""
"Przełączenie obecności okna na wszystkich obszarach roboczych lub jednym" "Przełączenie obecności okna na wszystkich obszarach roboczych lub jednym"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "" msgstr ""
"Wysunięcie okna, jeśli jest zasłonięte, odsunięcie w przeciwnym wypadku" "Wysunięcie okna, jeśli jest zasłonięte, odsunięcie w przeciwnym wypadku"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Wysunięcie okna przed pozostałe" msgstr "Wysunięcie okna przed pozostałe"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Odsunięcie okna pod pozostałe" msgstr "Odsunięcie okna pod pozostałe"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Pionowa maksymalizacja okna" msgstr "Pionowa maksymalizacja okna"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Pozioma maksymalizacja okna" msgstr "Pozioma maksymalizacja okna"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Podział widoku po lewej" msgstr "Podział widoku po lewej"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Podział widoku po prawej" msgstr "Podział widoku po prawej"
@@ -436,8 +419,8 @@ msgstr ""
"w przestrzeni współrzędnych logicznych pikseli, jednocześnie skalując bufory " "w przestrzeni współrzędnych logicznych pikseli, jednocześnie skalując bufory "
"ramki monitorów zamiast zawartości okien. Nie wymaga ponownego uruchomienia. " "ramki monitorów zamiast zawartości okien. Nie wymaga ponownego uruchomienia. "
"• „remote-desktop” — włącza obsługę zdalnego pulpitu. Aby dodać " "• „remote-desktop” — włącza obsługę zdalnego pulpitu. Aby dodać "
"udostępnianie ekranu, należy włączyć także opcję „screen-cast”. • " "udostępnianie ekranu, należy włączyć także opcję „screen-cast”. • „screen-"
"„screen-cast” — włącza obsługę nagrywania ekranu." "cast” — włącza obsługę nagrywania ekranu."
#: data/org.gnome.mutter.gschema.xml.in:145 #: data/org.gnome.mutter.gschema.xml.in:145
msgid "Select window from tab popup" msgid "Select window from tab popup"
@@ -507,10 +490,55 @@ msgstr "Przełączenie na 12. konsolę wirtualną"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Ponowne włączenie skrótów" msgstr "Ponowne włączenie skrótów"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Zezwolenie na przechwycenia za pomocą Xwayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Zezwolenie na uwzględnianie przechwyceń klawiatury wywoływanych przez "
"programy X11 działające w systemie Xwayland. Aby przechwycenie X11 zostało "
"uwzględnione w systemie Wayland, klient musi także wysłać konkretny "
"komunikat ClientMessage systemu X11 do głównego okna lub być na liście "
"programów w kluczu „xwayland-grab-access-rules”."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Programy Xwayland, które mogą wywoływać przechwycenia klawiatury"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Lista nazw zasobów lub klas zasobów okien X11, które mogą lub nie mogą "
"wywoływać przechwyceń klawiatury X11 w systemie Xwayland. Można uzyskać "
"nazwę zasobu lub klasę zasobów danego okna X11 za pomocą polecenia „xprop "
"WM_CLASS”. W wartościach obsługiwane są wieloznaczniki „*” i „?”. Wartości "
"zaczynające się od znaku „!” nie mają zezwolenia, co ma pierwszeństwo przed "
"zezwoleniami, aby usunąć je z domyślnej listy systemu. Domyślna lista "
"systemu zawiera te programy: „@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@”. "
"Użytkownicy mogą przerwać istniejące przechwycenie za pomocą skrótu "
"klawiszowego określonego w kluczu „restore-shortcuts”."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Przełącznik trybu (%d. grupa)" msgstr "Przełącznik trybu (%d. grupa)"
@@ -518,37 +546,37 @@ msgstr "Przełącznik trybu (%d. grupa)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Przełączenie monitora" msgstr "Przełączenie monitora"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Ekran pomocy" msgstr "Ekran pomocy"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Wbudowany ekran" msgstr "Wbudowany ekran"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Nieznany" msgstr "Nieznany"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Nieznany ekran" msgstr "Nieznany ekran"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -564,42 +592,46 @@ msgstr "Zdarzenie sygnału dźwiękowego"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Otwarcie połączenia z ekranem „%s” systemu X Window się nie powiodło\n" msgstr "Otwarcie połączenia z ekranem „%s” systemu X Window się nie powiodło\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Rozłącza połączenie z menedżerem sesji" msgstr "Rozłącza połączenie z menedżerem sesji"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Zastępuje uruchomionego menedżera okien" msgstr "Zastępuje uruchomionego menedżera okien"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Podaje identyfikator zarządzania sesją" msgstr "Podaje identyfikator zarządzania sesją"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Używany ekran X" msgstr "Używany ekran X"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Inicjuje sesję z zapisanego pliku" msgstr "Inicjuje sesję z zapisanego pliku"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Synchroniczne wywołania X" msgstr "Synchroniczne wywołania X"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Uruchamia jako menedżer składania Wayland" msgstr "Uruchamia jako menedżer składania Wayland"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Uruchamia jako osadzony menedżer składania" msgstr "Uruchamia jako osadzony menedżer składania"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Uruchamia jako pełny serwer wyświetlania zamiast osadzonego" msgstr "Uruchamia jako pełny serwer wyświetlania zamiast osadzonego"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Uruchamia za pomocą mechanizmu X11"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -653,7 +685,7 @@ msgstr "Używana wtyczka menedżera Mutter"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "%d. obszar roboczy" msgstr "%d. obszar roboczy"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -662,7 +694,7 @@ msgstr ""
"Na ekranie „%s” działa już menedżer okien. Aby zastąpić działającego " "Na ekranie „%s” działa już menedżer okien. Aby zastąpić działającego "
"menedżera okien, należy użyć opcji „--replace”." "menedżera okien, należy użyć opcji „--replace”."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Podekran %d ekranu „%s” jest nieprawidłowy\n" msgstr "Podekran %d ekranu „%s” jest nieprawidłowy\n"
@@ -677,7 +709,7 @@ msgstr ""
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Przełącznik trybu: %d. tryb" msgstr "Przełącznik trybu: %d. tryb"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."

View File

@@ -1,5 +1,5 @@
# Brazilian Portuguese translation of mutter. # Brazilian Portuguese translation of mutter.
# Copyright (C) 2002-2017 Free Software Foundation, Inc. # Copyright (C) 2002-2018 Free Software Foundation, Inc.
# This file is distributed under the same license as the mutter package. # This file is distributed under the same license as the mutter package.
# Sun G11n <gnome_int_l10n@ireland.sun.com>, 2002. # Sun G11n <gnome_int_l10n@ireland.sun.com>, 2002.
# Evandro Fernandes Giovanini <evandrofg@ig.com.br>, 2002, 2003, 2006. # Evandro Fernandes Giovanini <evandrofg@ig.com.br>, 2002, 2003, 2006.
@@ -14,15 +14,14 @@
# Antonio Fernandes C. Neto <fernandes@pelivre.org>, 2010. # Antonio Fernandes C. Neto <fernandes@pelivre.org>, 2010.
# Rodrigo Padula de Oliveira <contato@rodrigopadula.com>, 2011. # Rodrigo Padula de Oliveira <contato@rodrigopadula.com>, 2011.
# Artur de Aquino Morais <artur.morais93@outlook.com>, 2016. # Artur de Aquino Morais <artur.morais93@outlook.com>, 2016.
# Enrico Nicoletto <liverig@gmail.com>, 2012, 2014, 2016. # Enrico Nicoletto <liverig@gmail.com>, 2012-2016.
# Rafael Fontenelle <rafaelff@gnome.org>, 2013, 2014, 2016, 2017. # Rafael Fontenelle <rafaelff@gnome.org>, 2013-2018.
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter\n" "Project-Id-Version: mutter\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?product=mutter" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-06 04:14+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-02-16 15:02-0200\n"
"PO-Revision-Date: 2017-09-03 11:06-0200\n"
"Last-Translator: Rafael Fontenelle <rafaelff@gnome.org>\n" "Last-Translator: Rafael Fontenelle <rafaelff@gnome.org>\n"
"Language-Team: Brazilian Portuguese <gnome-pt_br-list@gnome.org>\n" "Language-Team: Brazilian Portuguese <gnome-pt_br-list@gnome.org>\n"
"Language: pt_BR\n" "Language: pt_BR\n"
@@ -58,138 +57,122 @@ msgid "Move window to last workspace"
msgstr "Mover a janela para o último espaço de trabalho" msgstr "Mover a janela para o último espaço de trabalho"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Mover a janela um espaço de trabalho à esquerda"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Mover a janela um espaço de trabalho à direita"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Mover a janela um espaço de trabalho acima" msgstr "Mover a janela um espaço de trabalho acima"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Mover a janela um espaço de trabalho abaixo" msgstr "Mover a janela um espaço de trabalho abaixo"
# Em conformidade com a tradução do gsettings-desktop-schemas --Enrico # Em conformidade com a tradução do gsettings-desktop-schemas --Enrico
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Mover janela para o monitor da esquerda" msgstr "Mover janela para o monitor da esquerda"
# Em conformidade com a tradução do gsettings-desktop-schemas --Enrico # Em conformidade com a tradução do gsettings-desktop-schemas --Enrico
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Mover janela para o monitor da direita" msgstr "Mover janela para o monitor da direita"
# Em conformidade com a tradução do gsettings-desktop-schemas --Enrico # Em conformidade com a tradução do gsettings-desktop-schemas --Enrico
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Mover janela para o monitor acima" msgstr "Mover janela para o monitor acima"
# Em conformidade com a tradução do gsettings-desktop-schemas --Enrico # Em conformidade com a tradução do gsettings-desktop-schemas --Enrico
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Mover janela para o monitor abaixo" msgstr "Mover janela para o monitor abaixo"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Alternar aplicativos" msgstr "Alternar aplicativos"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Alternar para o aplicativo anterior" msgstr "Alternar para o aplicativo anterior"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Alternar janelas" msgstr "Alternar janelas"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Alternar para a janela anterior" msgstr "Alternar para a janela anterior"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Alternar as janelas de um aplicativo" msgstr "Alternar as janelas de um aplicativo"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Alternar para a janela anterior de um aplicativo" msgstr "Alternar para a janela anterior de um aplicativo"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Alternar controles do sistema" msgstr "Alternar controles do sistema"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Alternar para o controle de sistema anterior" msgstr "Alternar para o controle de sistema anterior"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Alternar as janelas diretamente" msgstr "Alternar as janelas diretamente"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Alternar diretamente para a janela anterior" msgstr "Alternar diretamente para a janela anterior"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Alternar as janelas de um aplicativo diretamente" msgstr "Alternar as janelas de um aplicativo diretamente"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Alternar diretamente para a janela anterior de um aplicativo" msgstr "Alternar diretamente para a janela anterior de um aplicativo"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Alternar os controles de sistema diretamente" msgstr "Alternar os controles de sistema diretamente"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Alternar diretamente para o controle de sistema anterior" msgstr "Alternar diretamente para o controle de sistema anterior"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Ocultar todas as janelas normais" msgstr "Ocultar todas as janelas normais"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Trocar para o espaço de trabalho 1" msgstr "Trocar para o espaço de trabalho 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Trocar para o espaço de trabalho 2" msgstr "Trocar para o espaço de trabalho 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Trocar para o espaço de trabalho 3" msgstr "Trocar para o espaço de trabalho 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Trocar para o espaço de trabalho 4" msgstr "Trocar para o espaço de trabalho 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Trocar para o último espaço de trabalho" msgstr "Trocar para o último espaço de trabalho"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Move para o espaço de trabalho à esquerda"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Move para o espaço de trabalho à direita"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Mover para o espaço de trabalho acima" msgstr "Mover para o espaço de trabalho acima"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Mover para o espaço de trabalho abaixo" msgstr "Mover para o espaço de trabalho abaixo"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sistema" msgstr "Sistema"
@@ -201,6 +184,10 @@ msgstr "Mostrar o prompt de comando de execução"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Mostrar o panorama de atividades" msgstr "Mostrar o panorama de atividades"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Restaurar os atalhos de teclado"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Janelas" msgstr "Janelas"
@@ -226,54 +213,50 @@ msgid "Restore window"
msgstr "Restaurar janela" msgstr "Restaurar janela"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Alternar estado sombreado"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Fechar janela" msgstr "Fechar janela"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Ocultar janela" msgstr "Ocultar janela"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Mover janela" msgstr "Mover janela"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Redimensionar janela" msgstr "Redimensionar janela"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Alternar a janela em todos os espaços de trabalho ou em apenas um" msgstr "Alternar a janela em todos os espaços de trabalho ou em apenas um"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Elevar a janela se estiver coberta; caso contrário, a abaixa" msgstr "Elevar a janela se estiver coberta; caso contrário, a abaixa"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Elevar a janela para frente das outras" msgstr "Elevar a janela para frente das outras"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Colocar a janela atrás das outras" msgstr "Colocar a janela atrás das outras"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Maximizar a janela verticalmente" msgstr "Maximizar a janela verticalmente"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Maximizar a janela horizontalmente" msgstr "Maximizar a janela horizontalmente"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Visualizar divisão à esquerda" msgstr "Visualizar divisão à esquerda"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Visualizar divisão à direita" msgstr "Visualizar divisão à direita"
@@ -457,7 +440,6 @@ msgid "Cancel tab popup"
msgstr "Cancelar aba instantânea" msgstr "Cancelar aba instantânea"
#: data/org.gnome.mutter.gschema.xml.in:155 #: data/org.gnome.mutter.gschema.xml.in:155
#| msgid "Switch monitor"
msgid "Switch monitor configurations" msgid "Switch monitor configurations"
msgstr "Trocar configurações de monitor" msgstr "Trocar configurações de monitor"
@@ -517,10 +499,56 @@ msgstr "Trocar para o VT 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Reabilita atalhos" msgstr "Reabilita atalhos"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Permitir capturas com Xwayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Permite capturas de teclado emitidas por aplicativos X11 em execução no "
"Xwayland para serem levadas em consideração. Para que uma captura de X11 "
"seja levada em consideração no Wayland, o cliente também deve enviar um X11 "
"ClientMessage específica para a janela raiz ou estar entre os aplicativos "
"listados em branco na chave “xwayland-grab-access-rules”."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Aplicativos Xwayland com permissão para emitir capturas de teclado"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Lista os nomes dos recursos ou classe de recursos do janelas X11 com ou sem "
"permissão para emitir capturas de teclado X11 no Xwayland. O nome do recurso "
"ou a classe de recurso de uma determinada janela X11 podem ser obtidos "
"usando o comando “xprop WM_CLASS”. Há suporte a curingas “*” e “?” nos "
"valores. Os valores que começam com “!” são colocados em uma lista negra, "
"que tem precedência sobre a lista branca, para revogar aplicativos da lista "
"padrão do sistema. A lista de sistema padrão inclui os seguintes "
"aplicativos: “@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@”. Os usuários podem "
"quebrar uma captura existente usando o atalho de teclado específico definido "
"pela chave de associação de tecla “restore-shortcuts”."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Alternador de modo (Grupo %d)" msgstr "Alternador de modo (Grupo %d)"
@@ -528,37 +556,37 @@ msgstr "Alternador de modo (Grupo %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Trocar monitor" msgstr "Trocar monitor"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Mostrar ajuda na tela" msgstr "Mostrar ajuda na tela"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Tela embutida" msgstr "Tela embutida"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Desconhecido" msgstr "Desconhecido"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Monitor desconhecido" msgstr "Monitor desconhecido"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s de %s" msgstr "%s de %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -573,42 +601,46 @@ msgstr "Evento de som"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Falha ao abrir a exibição “%s” do sistema de janelas X\n" msgstr "Falha ao abrir a exibição “%s” do sistema de janelas X\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Desabilitar a conexão com o gerenciador de sessões" msgstr "Desabilitar a conexão com o gerenciador de sessões"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Substituir o gerenciador de janelas em execução" msgstr "Substituir o gerenciador de janelas em execução"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Especificar o ID do gerenciador de sessões" msgstr "Especificar o ID do gerenciador de sessões"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Exibição do X a ser utilizada" msgstr "Exibição do X a ser utilizada"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Inicializar a sessão a partir do arquivo salvo" msgstr "Inicializar a sessão a partir do arquivo salvo"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Fazer X chamadas síncronas" msgstr "Fazer X chamadas síncronas"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Executar como um compositor wayland" msgstr "Executar como um compositor wayland"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Executar como um compositor aninhado" msgstr "Executar como um compositor aninhado"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Executar como um servidor de tela cheia, ao invés de aninhado" msgstr "Executar como um servidor de tela cheia, ao invés de aninhado"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Executar com backend X11"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -664,7 +696,7 @@ msgstr "Plug-in do Mutter para usar"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Espaço de trabalho %d" msgstr "Espaço de trabalho %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -673,7 +705,7 @@ msgstr ""
"A exibição “%s” já possui um gerenciador de janelas; tente usar a opção --" "A exibição “%s” já possui um gerenciador de janelas; tente usar a opção --"
"replace para substituir o gerenciador de janelas atual." "replace para substituir o gerenciador de janelas atual."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "A tela %d na exibição “%s” é inválida\n" msgstr "A tela %d na exibição “%s” é inválida\n"
@@ -687,7 +719,7 @@ msgstr "O Mutter foi compilado sem suporte para modo detalhado\n"
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Alternador de modo: Modo %d" msgstr "Alternador de modo: Modo %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -700,6 +732,21 @@ msgstr ""
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (em %s)" msgstr "%s (em %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Mover a janela um espaço de trabalho à esquerda"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Mover a janela um espaço de trabalho à direita"
#~ msgid "Move to workspace left"
#~ msgstr "Move para o espaço de trabalho à esquerda"
#~ msgid "Move to workspace right"
#~ msgstr "Move para o espaço de trabalho à direita"
#~ msgid "Toggle shaded state"
#~ msgstr "Alternar estado sombreado"
#~ msgid "background texture could not be created from file" #~ msgid "background texture could not be created from file"
#~ msgstr "textura de plano de fundo não pôde ser criado de arquivo" #~ msgstr "textura de plano de fundo não pôde ser criado de arquivo"

553
po/ro.po
View File

@@ -4,15 +4,15 @@
# Mugurel Tudor <mugurelu@gnome.ro>, 2002-2004, 2005, 2006, 2007. # Mugurel Tudor <mugurelu@gnome.ro>, 2002-2004, 2005, 2006, 2007.
# Adi Roiban https://launchpad.net/~adiroiban, 2008, 2009 # Adi Roiban https://launchpad.net/~adiroiban, 2008, 2009
# Lucian Adrian Grijincu <lucian.grijincu@gmail.com>, 2011. # Lucian Adrian Grijincu <lucian.grijincu@gmail.com>, 2011.
# Daniel Șerbănescu <daniel [at] serbanescu [dot] dk>, 2015. # Daniel Șerbănescu <daniel [at] serbanescu [dot] dk>, 2015, 2018.
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: metacity.HEAD.ro\n" "Project-Id-Version: metacity.HEAD.ro\n"
"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=mutter&" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-06-07 13:00+0000\n"
"POT-Creation-Date: 2015-10-21 11:43+0000\n" "PO-Revision-Date: 2018-06-17 21:51+0300\n"
"PO-Revision-Date: 2015-10-22 19:10+0200\n" "Last-Translator: Florentina Mușat <florentina.musat.28 [at] gmail [dot] "
"Last-Translator: Daniel Șerbănescu <daniel [at] serbanescu [dot] dk>\n" "com>\n"
"Language-Team: Gnome Romanian Translation Team\n" "Language-Team: Gnome Romanian Translation Team\n"
"Language: ro\n" "Language: ro\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
@@ -20,275 +20,259 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n" "Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < " "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
"20)) ? 1 : 2);;\n" "20)) ? 1 : 2);;\n"
"X-Generator: Virtaal 0.7.1\n" "X-Generator: Poedit 2.0.8\n"
"X-Project-Style: gnome\n" "X-Project-Style: gnome\n"
#: ../data/50-mutter-navigation.xml.in.h:1 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
msgstr "Navigare" msgstr "Navigare"
#: ../data/50-mutter-navigation.xml.in.h:2 #: data/50-mutter-navigation.xml:9
msgid "Move window to workspace 1" msgid "Move window to workspace 1"
msgstr "Mută fereastra pe spațiul de lucru 1" msgstr "Mută fereastra pe spațiul de lucru 1"
#: ../data/50-mutter-navigation.xml.in.h:3 #: data/50-mutter-navigation.xml:12
msgid "Move window to workspace 2" msgid "Move window to workspace 2"
msgstr "Mută fereastra pe spațiul de lucru 2" msgstr "Mută fereastra pe spațiul de lucru 2"
#: ../data/50-mutter-navigation.xml.in.h:4 #: data/50-mutter-navigation.xml:15
msgid "Move window to workspace 3" msgid "Move window to workspace 3"
msgstr "Mută fereastra pe spațiul de lucru 3" msgstr "Mută fereastra pe spațiul de lucru 3"
#: ../data/50-mutter-navigation.xml.in.h:5 #: data/50-mutter-navigation.xml:18
msgid "Move window to workspace 4" msgid "Move window to workspace 4"
msgstr "Mută fereastra pe spațiul de lucru 4" msgstr "Mută fereastra pe spațiul de lucru 4"
#: ../data/50-mutter-navigation.xml.in.h:6 #: data/50-mutter-navigation.xml:21
msgid "Move window to last workspace" msgid "Move window to last workspace"
msgstr "Mută fereastra pe spațiul de lucru anterior" msgstr "Mută fereastra pe spațiul de lucru anterior"
#: ../data/50-mutter-navigation.xml.in.h:7 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Mută fereastra pe spațiul de lucru de la stânga"
#: ../data/50-mutter-navigation.xml.in.h:8
msgid "Move window one workspace to the right"
msgstr "Mută fereastra pe spațiul de lucru de la dreapta"
#: ../data/50-mutter-navigation.xml.in.h:9
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Mută fereastra pe spațiul de lucru de mai sus" msgstr "Mută fereastra pe spațiul de lucru de mai sus"
#: ../data/50-mutter-navigation.xml.in.h:10 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Mută fereastra pe spațiul de lucru de mai jos" msgstr "Mută fereastra pe spațiul de lucru de mai jos"
#: ../data/50-mutter-navigation.xml.in.h:11 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Mută fereastra cu un monitor la stânga" msgstr "Mută fereastra cu un monitor la stânga"
#: ../data/50-mutter-navigation.xml.in.h:12 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Mută fereastra un monitor la dreapta" msgstr "Mută fereastra un monitor la dreapta"
#: ../data/50-mutter-navigation.xml.in.h:13 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Mută fereastra cu un monitor mai sus" msgstr "Mută fereastra cu un monitor mai sus"
#: ../data/50-mutter-navigation.xml.in.h:14 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Mută fereastra cu un monitor mai jos" msgstr "Mută fereastra cu un monitor mai jos"
#: ../data/50-mutter-navigation.xml.in.h:15 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Comută aplicațiile" msgstr "Comută aplicațiile"
#: ../data/50-mutter-navigation.xml.in.h:16 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Schimbă la aplicația anterioară" msgstr "Schimbă la aplicația anterioară"
#: ../data/50-mutter-navigation.xml.in.h:17 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Schimbă ferestre" msgstr "Schimbă ferestre"
#: ../data/50-mutter-navigation.xml.in.h:18 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Schimbă la fereastra anterioară" msgstr "Schimbă la fereastra anterioară"
#: ../data/50-mutter-navigation.xml.in.h:19 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Schimbă ferestrele unei aplicații" msgstr "Schimbă ferestrele unei aplicații"
#: ../data/50-mutter-navigation.xml.in.h:20 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Schimbă la fereastra anterioară a unei aplicații" msgstr "Schimbă la fereastra anterioară a unei aplicații"
#: ../data/50-mutter-navigation.xml.in.h:21 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Schimbă comenzile de sistem" msgstr "Schimbă comenzile de sistem"
#: ../data/50-mutter-navigation.xml.in.h:22 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Schimbă la comanda de control anterioară" msgstr "Schimbă la comanda de control anterioară"
#: ../data/50-mutter-navigation.xml.in.h:23 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Schimbă ferestrele în mod direct" msgstr "Schimbă ferestrele în mod direct"
#: ../data/50-mutter-navigation.xml.in.h:24 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Schimbă la fereastra anterioară în mod direct" msgstr "Schimbă la fereastra anterioară în mod direct"
#: ../data/50-mutter-navigation.xml.in.h:25 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Schimbă în mod direct ferestrele uneui aplicații " msgstr "Comută direct ferestrele unei aplicații"
#: ../data/50-mutter-navigation.xml.in.h:26 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Schimbă în mod direct la fereastra anterioară a unei aplicații" msgstr "Schimbă în mod direct la fereastra anterioară a unei aplicații"
#: ../data/50-mutter-navigation.xml.in.h:27 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Schimbă comenzile de sistem în mod direct" msgstr "Schimbă comenzile de sistem în mod direct"
#: ../data/50-mutter-navigation.xml.in.h:28 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Schimbă în mod direct la o comandă de sistem anterioară" msgstr "Schimbă în mod direct la o comandă de sistem anterioară"
#: ../data/50-mutter-navigation.xml.in.h:29 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Ascunde toate ferestrele normale " msgstr "Ascunde toate ferestrele normale"
#: ../data/50-mutter-navigation.xml.in.h:30 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Comută la spațiul de lucru 1" msgstr "Comută la spațiul de lucru 1"
#: ../data/50-mutter-navigation.xml.in.h:31 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Comută la spațiul de lucru 2" msgstr "Comută la spațiul de lucru 2"
#: ../data/50-mutter-navigation.xml.in.h:32 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Comută la spațiul de lucru 3" msgstr "Comută la spațiul de lucru 3"
#: ../data/50-mutter-navigation.xml.in.h:33 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Comută la spațiul de lucru 4" msgstr "Comută la spațiul de lucru 4"
#: ../data/50-mutter-navigation.xml.in.h:34 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Comută la ultimul spațiu de lucru " msgstr "Comută la ultimul spațiu de lucru"
#: ../data/50-mutter-navigation.xml.in.h:35 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Mută pe spațiul de lucru din stânga"
#: ../data/50-mutter-navigation.xml.in.h:36
msgid "Move to workspace right"
msgstr "Mută pe spațiul de lucru din dreapta"
#: ../data/50-mutter-navigation.xml.in.h:37
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Mută pe spațiul de lucru deasupra" msgstr "Mută pe spațiul de lucru deasupra"
#: ../data/50-mutter-navigation.xml.in.h:38 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Mută pe spațiul de lucru de jos" msgstr "Mută pe spațiul de lucru de jos"
#: ../data/50-mutter-system.xml.in.h:1 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sistem" msgstr "Sistem"
#: ../data/50-mutter-system.xml.in.h:2 #: data/50-mutter-system.xml:8
msgid "Show the run command prompt" msgid "Show the run command prompt"
msgstr "Arată prompterul de comandă al comenzii run (rulează)" msgstr "Arată prompterul de comandă al comenzii run (rulează)"
#: ../data/50-mutter-system.xml.in.h:3 #: data/50-mutter-system.xml:10
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Arată prezentarea generală a activităților" msgstr "Arată prezentarea generală a activităților"
#: ../data/50-mutter-windows.xml.in.h:1 #: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Restaurează scurtăturile de tastatură"
#: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Ferestre" msgstr "Ferestre"
#: ../data/50-mutter-windows.xml.in.h:2 #: data/50-mutter-windows.xml:8
msgid "Activate the window menu" msgid "Activate the window menu"
msgstr "Activează meniul ferestrei" msgstr "Activează meniul ferestrei"
#: ../data/50-mutter-windows.xml.in.h:3 #: data/50-mutter-windows.xml:10
msgid "Toggle fullscreen mode" msgid "Toggle fullscreen mode"
msgstr "Comută modul pe tot ecranul" msgstr "Comută modul pe tot ecranul"
#: ../data/50-mutter-windows.xml.in.h:4 #: data/50-mutter-windows.xml:12
msgid "Toggle maximization state" msgid "Toggle maximization state"
msgstr "Comută starea de maximizare" msgstr "Comută starea de maximizare"
#: ../data/50-mutter-windows.xml.in.h:5 #: data/50-mutter-windows.xml:14
msgid "Maximize window" msgid "Maximize window"
msgstr "Maximizează fereastra" msgstr "Maximizează fereastra"
#: ../data/50-mutter-windows.xml.in.h:6 #: data/50-mutter-windows.xml:16
msgid "Restore window" msgid "Restore window"
msgstr "Restabilește fereastra" msgstr "Restabilește fereastra"
#: ../data/50-mutter-windows.xml.in.h:7 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Comută starea de umbrire"
#: ../data/50-mutter-windows.xml.in.h:8
msgid "Close window" msgid "Close window"
msgstr "Închide fereastra" msgstr "Închide fereastra"
#: ../data/50-mutter-windows.xml.in.h:9 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Ascunde fereastra" msgstr "Ascunde fereastra"
#: ../data/50-mutter-windows.xml.in.h:10 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Mută fereastra" msgstr "Mută fereastra"
#: ../data/50-mutter-windows.xml.in.h:11 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Redimensionează fereastra" msgstr "Redimensionează fereastra"
#: ../data/50-mutter-windows.xml.in.h:12 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Comută fereastra pe toate spațiile de lucru sau doar pe unul" msgstr "Comută fereastra pe toate spațiile de lucru sau doar pe unul"
#: ../data/50-mutter-windows.xml.in.h:13 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Ridică fereastra dacă este acoperită, altfel, coboar-o" msgstr "Ridică fereastra dacă este acoperită, altfel, coboar-o"
#: ../data/50-mutter-windows.xml.in.h:14 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Ridică fereastra deasupra celorlalte ferestre" msgstr "Ridică fereastra deasupra celorlalte ferestre"
#: ../data/50-mutter-windows.xml.in.h:15 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Coboară fereastra sub alte ferestre" msgstr "Coboară fereastra sub alte ferestre"
#: ../data/50-mutter-windows.xml.in.h:16 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Maximizează fereastra pe verticală" msgstr "Maximizează fereastra pe verticală"
#: ../data/50-mutter-windows.xml.in.h:17 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Maximizează fereastra pe orizontală" msgstr "Maximizează fereastra pe orizontală"
#: ../data/50-mutter-windows.xml.in.h:18 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Împarte în stânga" msgstr "Împarte în stânga"
#: ../data/50-mutter-windows.xml.in.h:19 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Împarte în dreapta" msgstr "Împarte în dreapta"
#: ../data/mutter.desktop.in.h:1 #: data/mutter.desktop.in:4
msgid "Mutter" msgid "Mutter"
msgstr "Mutter" msgstr "Mutter"
#: ../data/org.gnome.mutter.gschema.xml.in.h:1 #: data/org.gnome.mutter.gschema.xml.in:7
msgid "Modifier to use for extended window management operations" msgid "Modifier to use for extended window management operations"
msgstr "" msgstr ""
"Modificatorul folosit pentru operațiile extinse de management al ferestrelor" "Modificatorul folosit pentru operațiile extinse de management al ferestrelor"
#: ../data/org.gnome.mutter.gschema.xml.in.h:2 #: data/org.gnome.mutter.gschema.xml.in:8
msgid "" msgid ""
"This key will initiate the \"overlay\", which is a combination window " "This key will initiate the overlay, which is a combination window overview "
"overview and application launching system. The default is intended to be the " "and application launching system. The default is intended to be the “Windows "
"\"Windows key\" on PC hardware. It's expected that this binding either the " "key on PC hardware. Its expected that this binding either the default or "
"default or set to the empty string." "set to the empty string."
msgstr "" msgstr ""
"Această cheie va iniția „overlay”-ul, care este o combinație între o privire " "Această cheie va iniția „suprapunerea”, care este o combinație între o "
"de ansamblu a ferestrelor și un sistemul de lansare de aplicații. Implicit " "privire de ansamblu a ferestrelor și un sistem de lansare de aplicații. "
"este testa „Windows” pe hardware PC. Este de așteptat ca această cheie să " "Implicit este tasta „Windows” pe hardware PC. Este de așteptat ca această "
"fie sau implicit sau setat la șirul vid." "legătură să fie ori stabilită la implicit sau la șirul vid."
#: ../data/org.gnome.mutter.gschema.xml.in.h:3 #: data/org.gnome.mutter.gschema.xml.in:20
msgid "Attach modal dialogs" msgid "Attach modal dialogs"
msgstr "Atașează dialogurile modale" msgstr "Atașează dialogurile modale"
#: ../data/org.gnome.mutter.gschema.xml.in.h:4 #: data/org.gnome.mutter.gschema.xml.in:21
msgid "" msgid ""
"When true, instead of having independent titlebars, modal dialogs appear " "When true, instead of having independent titlebars, modal dialogs appear "
"attached to the titlebar of the parent window and are moved together with " "attached to the titlebar of the parent window and are moved together with "
@@ -298,13 +282,12 @@ msgstr ""
"modale apar atașate la bara de titlu a ferestrei părinte și sunt mutate " "modale apar atașate la bara de titlu a ferestrei părinte și sunt mutate "
"împreună cu fereastra părinte." "împreună cu fereastra părinte."
#: ../data/org.gnome.mutter.gschema.xml.in.h:5 #: data/org.gnome.mutter.gschema.xml.in:30
#, fuzzy
msgid "Enable edge tiling when dropping windows on screen edges" msgid "Enable edge tiling when dropping windows on screen edges"
msgstr "" msgstr ""
"Activează mozaicul lateral la plasarea ferestrelor pe marginile ecranului" "Activează mozaicul de margine la plasarea ferestrelor pe marginile ecranului"
#: ../data/org.gnome.mutter.gschema.xml.in.h:6 #: data/org.gnome.mutter.gschema.xml.in:31
msgid "" msgid ""
"If enabled, dropping windows on vertical screen edges maximizes them " "If enabled, dropping windows on vertical screen edges maximizes them "
"vertically and resizes them horizontally to cover half of the available " "vertically and resizes them horizontally to cover half of the available "
@@ -315,25 +298,25 @@ msgstr ""
"pentru a acoperi jumătate din suprafața disponibilă. Plasarea ferestrelor pe " "pentru a acoperi jumătate din suprafața disponibilă. Plasarea ferestrelor pe "
"marginea de sus a ecranului le maximizează complet." "marginea de sus a ecranului le maximizează complet."
#: ../data/org.gnome.mutter.gschema.xml.in.h:7 #: data/org.gnome.mutter.gschema.xml.in:40
msgid "Workspaces are managed dynamically" msgid "Workspaces are managed dynamically"
msgstr "Spațiile de lucru sunt gestionate în mod dinamic" msgstr "Spațiile de lucru sunt gestionate în mod dinamic"
#: ../data/org.gnome.mutter.gschema.xml.in.h:8 #: data/org.gnome.mutter.gschema.xml.in:41
msgid "" msgid ""
"Determines whether workspaces are managed dynamically or whether there's a " "Determines whether workspaces are managed dynamically or whether theres a "
"static number of workspaces (determined by the num-workspaces key in org." "static number of workspaces (determined by the num-workspaces key in org."
"gnome.desktop.wm.preferences)." "gnome.desktop.wm.preferences)."
msgstr "" msgstr ""
"Determină dacă spațiile de lucru sunt gestionate în mod dinamic sau dacă " "Determină dacă spațiile de lucru sunt administrate dinamic sau dacă există "
"există un număr static de spații de lucru (determinată de cheia num-" "un număr static de spații de lucru (determinat de cheia num-workspaces din "
"workspaces” din ”org.gnome.desktop.wm.preferences)" "org.gnome.desktop.wm.preferences)"
#: ../data/org.gnome.mutter.gschema.xml.in.h:9 #: data/org.gnome.mutter.gschema.xml.in:50
msgid "Workspaces only on primary" msgid "Workspaces only on primary"
msgstr "Spații de lucru doar pe ecranul principal" msgstr "Spații de lucru doar pe ecranul principal"
#: ../data/org.gnome.mutter.gschema.xml.in.h:10 #: data/org.gnome.mutter.gschema.xml.in:51
msgid "" msgid ""
"Determines whether workspace switching should happen for windows on all " "Determines whether workspace switching should happen for windows on all "
"monitors or only for windows on the primary monitor." "monitors or only for windows on the primary monitor."
@@ -342,11 +325,11 @@ msgstr ""
"ferestrele de pe toate monitoarele sau doar pentru ferestrele de pe " "ferestrele de pe toate monitoarele sau doar pentru ferestrele de pe "
"monitorul principal." "monitorul principal."
#: ../data/org.gnome.mutter.gschema.xml.in.h:11 #: data/org.gnome.mutter.gschema.xml.in:59
msgid "No tab popup" msgid "No tab popup"
msgstr "Fără popup pentru tab" msgstr "Fără popup pentru tab"
#: ../data/org.gnome.mutter.gschema.xml.in.h:12 #: data/org.gnome.mutter.gschema.xml.in:60
msgid "" msgid ""
"Determines whether the use of popup and highlight frame should be disabled " "Determines whether the use of popup and highlight frame should be disabled "
"for window cycling." "for window cycling."
@@ -354,42 +337,40 @@ msgstr ""
"Determină dacă utilizarea unui popup sau a unui cadrul evidențiat ar trebui " "Determină dacă utilizarea unui popup sau a unui cadrul evidențiat ar trebui "
"să fie dezactivată pentru rotirea ferestrelor." "să fie dezactivată pentru rotirea ferestrelor."
#: ../data/org.gnome.mutter.gschema.xml.in.h:13 #: data/org.gnome.mutter.gschema.xml.in:68
msgid "Delay focus changes until the pointer stops moving" msgid "Delay focus changes until the pointer stops moving"
msgstr "" msgstr ""
"Întârzie schimbările de focalizare până când cursorul încetează să se miște" "Întârzie schimbările de focalizare până când cursorul încetează să se miște"
#: ../data/org.gnome.mutter.gschema.xml.in.h:14 #: data/org.gnome.mutter.gschema.xml.in:69
msgid "" msgid ""
"If set to true, and the focus mode is either \"sloppy\" or \"mouse\" then " "If set to true, and the focus mode is either sloppy or mouse then the "
"the focus will not be changed immediately when entering a window, but only " "focus will not be changed immediately when entering a window, but only after "
"after the pointer stops moving." "the pointer stops moving."
msgstr "" msgstr ""
"Dacă este activat iar modul de focalizare este „alunecos” sau „maus”, " "Dacă este stabilit ca adevărat, iar modul de focalizare este ori „neglijent” "
"focalizarea nu va fi schimbată imediat după intrarea în câmpul unei " "ori „maus”, atunci focalizarea nu va fi schimbată imediat la intrarea într-o "
"ferestre, ci doar după ce pointerul încetează să se miște." "fereastră, ci doar după ce indicatorul nu se mai miș."
#: ../data/org.gnome.mutter.gschema.xml.in.h:15 #: data/org.gnome.mutter.gschema.xml.in:79
#, fuzzy
msgid "Draggable border width" msgid "Draggable border width"
msgstr "Lățimea margini ce poate fi acționată" msgstr "Lățimea marginii ce poate fi plasată"
#: ../data/org.gnome.mutter.gschema.xml.in.h:16 #: data/org.gnome.mutter.gschema.xml.in:80
#, fuzzy
msgid "" msgid ""
"The amount of total draggable borders. If the theme's visible borders are " "The amount of total draggable borders. If the themes visible borders are "
"not enough, invisible borders will be added to meet this value." "not enough, invisible borders will be added to meet this value."
msgstr "" msgstr ""
"Numărul marginilor ce pot fi acționate. Dacă marginile vizibile ale temei " "Numărul total de margini ce pot fi plasate. Dacă marginile vizibile ale "
"sunt insuficiente vor fi adăugate margini invizibile pentru a completa " "temei nu sunt suficiente, vor fi adăugate margini invizibile pentru a "
"aceast număr." "respecta această valoare."
#: ../data/org.gnome.mutter.gschema.xml.in.h:17 #: data/org.gnome.mutter.gschema.xml.in:89
msgid "Auto maximize nearly monitor sized windows" msgid "Auto maximize nearly monitor sized windows"
msgstr "" msgstr ""
"Maximizează automat ferestrele de dimensiune apropiată de cea a monitorului" "Maximizează automat ferestrele de dimensiune apropiată de cea a monitorului"
#: ../data/org.gnome.mutter.gschema.xml.in.h:18 #: data/org.gnome.mutter.gschema.xml.in:90
msgid "" msgid ""
"If enabled, new windows that are initially the size of the monitor " "If enabled, new windows that are initially the size of the monitor "
"automatically get maximized." "automatically get maximized."
@@ -397,11 +378,11 @@ msgstr ""
"Dacă este activată, ferestrele noi care sunt inițial de mărimea monitorului " "Dacă este activată, ferestrele noi care sunt inițial de mărimea monitorului "
"sunt maximizate în mod automat." "sunt maximizate în mod automat."
#: ../data/org.gnome.mutter.gschema.xml.in.h:19 #: data/org.gnome.mutter.gschema.xml.in:98
msgid "Place new windows in the center" msgid "Place new windows in the center"
msgstr "Plasează ferestre noi în centru" msgstr "Plasează ferestre noi în centru"
#: ../data/org.gnome.mutter.gschema.xml.in.h:20 #: data/org.gnome.mutter.gschema.xml.in:99
msgid "" msgid ""
"When true, the new windows will always be put in the center of the active " "When true, the new windows will always be put in the center of the active "
"screen of the monitor." "screen of the monitor."
@@ -409,107 +390,256 @@ msgstr ""
"Când este adevărat, ferestrele noi vor fi plasate în centrul ecranului activ " "Când este adevărat, ferestrele noi vor fi plasate în centrul ecranului activ "
"al monitorului." "al monitorului."
#: ../data/org.gnome.mutter.gschema.xml.in.h:21 #: data/org.gnome.mutter.gschema.xml.in:107
msgid "Enable experimental features"
msgstr "Activează funcționalitățile experimentale"
#: data/org.gnome.mutter.gschema.xml.in:108
msgid ""
"To enable experimental features, add the feature keyword to the list. "
"Whether the feature requires restarting the compositor depends on the given "
"feature. Any experimental feature is not required to still be available, or "
"configurable. Dont expect adding anything in this setting to be future "
"proof. Currently possible keywords: • “scale-monitor-framebuffer” — makes "
"mutter default to layout logical monitors in a logical pixel coordinate "
"space, while scaling monitor framebuffers instead of window content, to "
"manage HiDPI monitors. Does not require a restart."
msgstr ""
"Pentru a activa funcționalitățile experimentale, adăugați cuvântul cheie al "
"funcționalității la listă. Dacă funcționalitatea necesită sau nu repornirea "
"compunătorului depinde de funcționalitatea dată. Nu este necesar ca "
"funcționalitatea experimentală să fie încă disponibilă, sau configurabilă. "
"Nu vă așteptați să adăugați ceva la această configurare care va rezista "
"timpului. Cuvintele cheie posibile în mod curent: • „scale-monitor-"
"framebuffer” — face ca mutter să treacă implicit la aranjarea monitoarelor "
"logice într-un spațiu logic de coordonate pixel, în timpul scalării de "
"framebuffer-uri de monitor în locul conținutului ferestrei, pentru a "
"gestiona monitoare HiDPI. Nu necesită o repornire."
#: data/org.gnome.mutter.gschema.xml.in:141
msgid "Select window from tab popup" msgid "Select window from tab popup"
msgstr "Selectează fereastra din popup-ul tabului" msgstr "Selectează fereastra din popup-ul tabului"
#: ../data/org.gnome.mutter.gschema.xml.in.h:22 #: data/org.gnome.mutter.gschema.xml.in:146
msgid "Cancel tab popup" msgid "Cancel tab popup"
msgstr "Elimină popup-ul pentru tab" msgstr "Elimină popup-ul pentru tab"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:1 #: data/org.gnome.mutter.gschema.xml.in:151
msgid "Switch monitor configurations"
msgstr "Comută configurațiile de monitor"
#: data/org.gnome.mutter.gschema.xml.in:156
msgid "Rotates the built-in monitor configuration"
msgstr "Rotește configurarea de monitor integrat"
#: data/org.gnome.mutter.wayland.gschema.xml.in:6
msgid "Switch to VT 1" msgid "Switch to VT 1"
msgstr "Comută la terminalul virtual 1" msgstr "Comută la terminalul virtual 1"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:2 #: data/org.gnome.mutter.wayland.gschema.xml.in:10
msgid "Switch to VT 2" msgid "Switch to VT 2"
msgstr "Comută la terminalul virtual 2" msgstr "Comută la terminalul virtual 2"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:3 #: data/org.gnome.mutter.wayland.gschema.xml.in:14
msgid "Switch to VT 3" msgid "Switch to VT 3"
msgstr "Comută la terminalul virtual 3" msgstr "Comută la terminalul virtual 3"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:4 #: data/org.gnome.mutter.wayland.gschema.xml.in:18
msgid "Switch to VT 4" msgid "Switch to VT 4"
msgstr "Comută la terminalul virtual 4" msgstr "Comută la terminalul virtual 4"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:5 #: data/org.gnome.mutter.wayland.gschema.xml.in:22
msgid "Switch to VT 5" msgid "Switch to VT 5"
msgstr "Comută la terminalul virtual 5" msgstr "Comută la terminalul virtual 5"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:6 #: data/org.gnome.mutter.wayland.gschema.xml.in:26
msgid "Switch to VT 6" msgid "Switch to VT 6"
msgstr "Comută la terminalul virtual 6" msgstr "Comută la terminalul virtual 6"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:7 #: data/org.gnome.mutter.wayland.gschema.xml.in:30
msgid "Switch to VT 7" msgid "Switch to VT 7"
msgstr "Comută la terminalul virtual 7" msgstr "Comută la terminalul virtual 7"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:8 #: data/org.gnome.mutter.wayland.gschema.xml.in:34
msgid "Switch to VT 8" msgid "Switch to VT 8"
msgstr "Comută la terminalul virtual 8" msgstr "Comută la terminalul virtual 8"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:9 #: data/org.gnome.mutter.wayland.gschema.xml.in:38
msgid "Switch to VT 9" msgid "Switch to VT 9"
msgstr "Comută la terminalul virtual 9" msgstr "Comută la terminalul virtual 9"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:10 #: data/org.gnome.mutter.wayland.gschema.xml.in:42
msgid "Switch to VT 10" msgid "Switch to VT 10"
msgstr "Comută la terminalul virtual 10" msgstr "Comută la terminalul virtual 10"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:11 #: data/org.gnome.mutter.wayland.gschema.xml.in:46
msgid "Switch to VT 11" msgid "Switch to VT 11"
msgstr "Comută la terminalul virtual 11" msgstr "Comută la terminalul virtual 11"
#: ../data/org.gnome.mutter.wayland.gschema.xml.in.h:12 #: data/org.gnome.mutter.wayland.gschema.xml.in:50
msgid "Switch to VT 12" msgid "Switch to VT 12"
msgstr "Comută la terminalul virtual 12" msgstr "Comută la terminalul virtual 12"
#: ../src/backends/meta-monitor-manager.c:500 #: data/org.gnome.mutter.wayland.gschema.xml.in:54
msgid "Re-enable shortcuts"
msgstr "Reactivează scurtăturile"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Permite capturi de tastatură cu Xwayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Permite capturile de tastatură emise de aplicațiile X11 care rulează în "
"Xwayland să fie luate în considerare. Pentru ca o captură X11 să fie luată "
"în considerare în Wayland, clientul trebuie ori să trimită un mesaj specific "
"ClientMessage X11 la fereastra root ori să se numere printre aplicațiile "
"permise în cheia „xwayland-grab-access-rules”."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Aplicațiile Xwayland sunt permise de a emite capturi de tastatură"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Listează numele resurselor sau clasa resurselor ale ferestrelor X11 permise "
"sau nepermise să emită capturi de tastatură X11 în Xwayland. Numele resursei "
"sau clasa resursei a unei ferestre X11 date pot fi obținute utilizând "
"comanda „xprop WM_CLASS*. Metacaracterele „*” și jokerii „?” în valori sunt "
"suportați. Valorile care încep cu „!” sunt adăugate în lista de interziceri, "
"care are prioritate peste lista de permisiuni, pentru a revoca aplicații din "
"lista de sistem implicită. Lista de sistem implicită include următoarele "
"aplicații: „@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Utilizatorii pot să "
"întrerupă o captură existentă prin utilizarea scurtăturii de tastatură "
"specifice definite de tasta de stabilire a combinațiilor de taste „restore-"
"shortcuts”."
#. TRANSLATORS: This string refers to a button that switches between
#. * different modes.
#.
#: src/backends/meta-input-settings.c:2325
#, c-format
msgid "Mode Switch (Group %d)"
msgstr "Comutator de mod (grupul %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs.
#.
#: src/backends/meta-input-settings.c:2348
msgid "Switch monitor"
msgstr "Comută monitorul"
#: src/backends/meta-input-settings.c:2350
msgid "Show on-screen help"
msgstr "Arată ajutorul virtual"
#: src/backends/meta-monitor-manager.c:903
msgid "Built-in display" msgid "Built-in display"
msgstr "Afișaj integrat" msgstr "Afișaj integrat"
#: ../src/backends/meta-monitor-manager.c:526 #: src/backends/meta-monitor-manager.c:926
msgid "Unknown" msgid "Unknown"
msgstr "Necunoscut" msgstr "Necunoscut"
#: ../src/backends/meta-monitor-manager.c:528 #: src/backends/meta-monitor-manager.c:928
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Afișaj necunoscut" msgstr "Afișaj necunoscut"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: ../src/backends/meta-monitor-manager.c:536 #: src/backends/meta-monitor-manager.c:936
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: ../src/compositor/compositor.c:456 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display \"%s" "Another compositing manager is already running on screen %i on display “%s”."
"\"."
msgstr "" msgstr ""
"Un alt administrator de ferestre compozit rulează deja pe ecranul %i pe " "Un alt administrator de ferestre de compunere rulează deja pe ecranul %i pe "
"afișajul „%s”." "afișajul „%s”."
#: ../src/core/bell.c:185 #: src/core/bell.c:194
msgid "Bell event" msgid "Bell event"
msgstr "Eveniment sonor" msgstr "Eveniment sonor"
#: ../src/core/delete.c:127 #: src/core/display.c:608
#, c-format
msgid "Failed to open X Window System display “%s”\n"
msgstr "Nu s-a putut deschide afișajul sistemului de ferestre X „%s”\n"
#: src/core/main.c:190
msgid "Disable connection to session manager"
msgstr "Dezactivează conexiunea la administratorul de sesiune"
#: src/core/main.c:196
msgid "Replace the running window manager"
msgstr "Înlocuiește administratorul de ferestre curent"
#: src/core/main.c:202
msgid "Specify session management ID"
msgstr "Specifică ID-ul administrării de sesiune"
#: src/core/main.c:207
msgid "X Display to use"
msgstr "Ecranul X ce va fi folosit"
#: src/core/main.c:213
msgid "Initialize session from savefile"
msgstr "Inițializează sesiunea din fișierul salvat"
#: src/core/main.c:219
msgid "Make X calls synchronous"
msgstr "Realizează apelurile X sincron"
#: src/core/main.c:226
msgid "Run as a wayland compositor"
msgstr "Rulează ca un compunător wayland"
#: src/core/main.c:232
msgid "Run as a nested compositor"
msgstr "Rulează ca un compunător imbricat"
#: src/core/main.c:240
msgid "Run as a full display server, rather than nested"
msgstr "Rulează ca server de afișare și nu ca server imbricat"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Rulează cu backend X11"
#. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
msgid "“%s” is not responding." msgid "“%s” is not responding."
msgstr "„%s” nu răspunde." msgstr "„%s” nu răspunde."
#: ../src/core/delete.c:129 #: src/core/meta-close-dialog-default.c:149
msgid "Application is not responding." msgid "Application is not responding."
msgstr "Aplicația nu răspunde." msgstr "Aplicația nu răspunde."
#: ../src/core/delete.c:134 #: src/core/meta-close-dialog-default.c:154
msgid "" msgid ""
"You may choose to wait a short while for it to continue or force the " "You may choose to wait a short while for it to continue or force the "
"application to quit entirely." "application to quit entirely."
@@ -517,112 +647,95 @@ msgstr ""
"Puteți alege între a aștepta pentru câteva secunde ca aplicația să continue " "Puteți alege între a aștepta pentru câteva secunde ca aplicația să continue "
"sau a forța terminarea aplicației." "sau a forța terminarea aplicației."
#: ../src/core/delete.c:141 #: src/core/meta-close-dialog-default.c:161
msgid "_Wait"
msgstr "_Așteaptă"
#: ../src/core/delete.c:141
msgid "_Force Quit" msgid "_Force Quit"
msgstr "_Forțează închiderea" msgstr "_Forțează închiderea"
#: ../src/core/display.c:563 #: src/core/meta-close-dialog-default.c:161
#, c-format msgid "_Wait"
msgid "Failed to open X Window System display '%s'\n" msgstr "_Așteaptă"
msgstr "Nu s-a putut deschide afișajul X Window System „%s”\n"
#: ../src/core/main.c:176 #: src/core/mutter.c:39
msgid "Disable connection to session manager"
msgstr "Dezactivează conexiunea la administratorul de sesiune"
#: ../src/core/main.c:182
msgid "Replace the running window manager"
msgstr "Înlocuiește administratorul de ferestre curent"
#: ../src/core/main.c:188
msgid "Specify session management ID"
msgstr "Specifică ID-ul administrării de sesiune"
#: ../src/core/main.c:193
msgid "X Display to use"
msgstr "Ecranul X ce va fi folosit"
#: ../src/core/main.c:199
msgid "Initialize session from savefile"
msgstr "Inițializează sesiunea din fișierul salvat"
#: ../src/core/main.c:205
msgid "Make X calls synchronous"
msgstr "Realizează apelurile X sincron"
#: ../src/core/main.c:212
msgid "Run as a wayland compositor"
msgstr "Rulează ca compozitor wayland"
#: ../src/core/main.c:220
msgid "Run as a full display server, rather than nested"
msgstr "Rulează ca server de afișare și nu ca server imbricat"
#: ../src/core/mutter.c:39
#, c-format #, c-format
msgid "" msgid ""
"mutter %s\n" "mutter %s\n"
"Copyright (C) 2001-%d Havoc Pennington, Red Hat, Inc., and others\n" "Copyright © 2001-%d Havoc Pennington, Red Hat, Inc., and others\n"
"This is free software; see the source for copying conditions.\n" "This is free software; see the source for copying conditions.\n"
"There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A " "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A "
"PARTICULAR PURPOSE.\n" "PARTICULAR PURPOSE.\n"
msgstr "" msgstr ""
"mutter %s\n" "mutter %s\n"
"Drepturi de autor (C) 2001--%d Havoc Pennington, Red Hat, Inc., și alții\n" "Drepturi de autor (C) 2001-%d Havoc Pennington, Red Hat, Inc., și alții\n"
"Acesta este software liber; consultați codul sursă pentru condițiile de " "Acesta este software liber; consultați codul sursă pentru condițiile de "
"copiere.\n" "copiere.\n"
"Nu există NICI O garanție; nici pentru COMERCIALIZARE sau UTILIZAREA ÎNTR-UN " "Nu există NICIO garanție; nici pentru COMERCIALIZARE sau UTILIZAREA ÎNTR-UN "
"SCOP ANUME.\n" "SCOP ANUME.\n"
#: ../src/core/mutter.c:53 #: src/core/mutter.c:53
msgid "Print version" msgid "Print version"
msgstr "Afișează versiunea" msgstr "Afișează versiunea"
#: ../src/core/mutter.c:59 #: src/core/mutter.c:59
msgid "Mutter plugin to use" msgid "Mutter plugin to use"
msgstr "Modul Mutter de utilizat" msgstr "Modul Mutter de utilizat"
#: ../src/core/prefs.c:2050 #: src/core/prefs.c:1997
#, c-format #, c-format
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Spațiu de lucru %d" msgstr "Spațiu de lucru %d"
#: ../src/core/screen.c:526 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display \"%s\" already has a window manager; try using the --replace option " "Display “%s” already has a window manager; try using the --replace option to "
"to replace the current window manager." "replace the current window manager."
msgstr "" msgstr ""
"Afișajul „%s” are deja un administrator de ferestre; încercați să folosiți " "Afișajul „%s” are deja un administrator de ferestre; încercați să utilizați "
"opțiunea --replace (înlocuiește) pentru a înlocui administratorul de " "opțiunea --replace (înlocuiește) pentru a înlocui administratorul de "
"ferestre actual." "ferestre curent."
#: ../src/core/screen.c:608 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display '%s' is invalid\n" msgid "Screen %d on display %s is invalid\n"
msgstr "Ecranul %d pe afișajul „%s” este invalid\n" msgstr "Ecranul %d de pe afișajul „%s” nu este valid\n"
#: ../src/core/util.c:118 #: src/core/util.c:120
msgid "Mutter was compiled without support for verbose mode\n" msgid "Mutter was compiled without support for verbose mode\n"
msgstr "Mutter a fost compilat fără suport pentru modul detaliat\n" msgstr "Mutter a fost compilat fără suport pentru modul detaliat\n"
#: ../src/x11/session.c:1815 #: src/wayland/meta-wayland-tablet-pad.c:567
#, c-format
msgid "Mode Switch: Mode %d"
msgstr "Comutator de mod: modul %d"
#: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support &quot;save current setup&quot; and will have to " "These windows do not support save current setup and will have to be "
"be restarted manually next time you log in." "restarted manually next time you log in."
msgstr "" msgstr ""
"Aceste ferestre nu suportă „salvează configurarea curentă” și vor trebui " "Aceste ferestre nu suportă „salvează configurarea curentă” și vor trebui "
"repornite manual următoarea dată când vă veți autentifica." "repornite manual următoarea dată când vă veți autentifica."
#: ../src/x11/window-props.c:549 #: src/x11/window-props.c:559
#, c-format #, c-format
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (pe %s)" msgstr "%s (pe %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Mută fereastra pe spațiul de lucru de la stânga"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Mută fereastra pe spațiul de lucru de la dreapta"
#~ msgid "Move to workspace left"
#~ msgstr "Mută pe spațiul de lucru din stânga"
#~ msgid "Move to workspace right"
#~ msgstr "Mută pe spațiul de lucru din dreapta"
#~ msgid "Toggle shaded state"
#~ msgstr "Comută starea de umbrire"
#~ msgid "Switch to workspace on the left of the current workspace" #~ msgid "Switch to workspace on the left of the current workspace"
#~ msgstr "Schimbă cu spațiul de lucru din stânga celui actual" #~ msgstr "Schimbă cu spațiul de lucru din stânga celui actual"

224
po/sk.po
View File

@@ -12,10 +12,9 @@
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter\n" "Project-Id-Version: mutter\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-06 04:14+0000\n"
"POT-Creation-Date: 2017-08-21 04:46+0000\n" "PO-Revision-Date: 2018-03-17 21:52+0100\n"
"PO-Revision-Date: 2017-08-23 19:50+0200\n"
"Last-Translator: Dušan Kazik <prescott66@gmail.com>\n" "Last-Translator: Dušan Kazik <prescott66@gmail.com>\n"
"Language-Team: Slovak <gnome-sk-list@gnome.org>\n" "Language-Team: Slovak <gnome-sk-list@gnome.org>\n"
"Language: sk\n" "Language: sk\n"
@@ -23,7 +22,7 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n" "Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 1 : (n>=2 && n<=4) ? 2 : 0;\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 1 : (n>=2 && n<=4) ? 2 : 0;\n"
"X-Generator: Poedit 2.0.3\n" "X-Generator: Poedit 2.0.6\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
@@ -56,167 +55,147 @@ msgstr "Presunúť okno na posledný pracovný priestor"
# description # description
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Presunúť okno o jeden pracovný priestor vľavo"
# description
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Presunúť okno o jeden pracovný priestor vpravo"
# description
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Presunúť okno o jeden pracovný priestor hore" msgstr "Presunúť okno o jeden pracovný priestor hore"
# description # description
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Presunúť okno o jeden pracovný priestor dolu" msgstr "Presunúť okno o jeden pracovný priestor dolu"
# description # description
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Presunúť okno o jeden monitor vľavo" msgstr "Presunúť okno o jeden monitor vľavo"
# description # description
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Presunúť okno o jeden monitor vpravo" msgstr "Presunúť okno o jeden monitor vpravo"
# description # description
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Presunúť okno o jeden monitor hore" msgstr "Presunúť okno o jeden monitor hore"
# description # description
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Presunúť okno o jeden monitor dolu" msgstr "Presunúť okno o jeden monitor dolu"
# description # description
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Prepnúť aplikácie" msgstr "Prepnúť aplikácie"
# description # description
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Prepnúť na predchádzajúcu aplikáciu" msgstr "Prepnúť na predchádzajúcu aplikáciu"
# description # description
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Prepnúť okná" msgstr "Prepnúť okná"
# description # description
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Prepnúť na predchádzajúce okno" msgstr "Prepnúť na predchádzajúce okno"
# description # description
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Prepnúť okná aplikácie" msgstr "Prepnúť okná aplikácie"
# description # description
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Prepnúť na predchádzajúce okno aplikácie" msgstr "Prepnúť na predchádzajúce okno aplikácie"
# PK: predpokladam ze to prepisane medzi tlacidlami # PK: predpokladam ze to prepisane medzi tlacidlami
# description # description
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Prepnúť medzi ovládacími prvkami systému" msgstr "Prepnúť medzi ovládacími prvkami systému"
# PK: predpokladam ze to prepisane medzi tlacidlami # PK: predpokladam ze to prepisane medzi tlacidlami
# description # description
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Prepnúť na predchádzajúci ovládací prvok systému" msgstr "Prepnúť na predchádzajúci ovládací prvok systému"
# description # description
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Prepnúť okná priamo" msgstr "Prepnúť okná priamo"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Priamo prepnúť na predchádzajúce okno" msgstr "Priamo prepnúť na predchádzajúce okno"
# description # description
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Prepnúť okná aplikácie priamo" msgstr "Prepnúť okná aplikácie priamo"
# description # description
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Priamo prepnúť na predchádzajúce okno aplikácie" msgstr "Priamo prepnúť na predchádzajúce okno aplikácie"
# description # description
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Prepnúť medzi ovládacími prvkami systému priamo" msgstr "Prepnúť medzi ovládacími prvkami systému priamo"
# PK: predpokladam ze to prepisane medzi tlacidlami # PK: predpokladam ze to prepisane medzi tlacidlami
# description # description
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Priamo prepnúť na predchádzajúci ovládací prvok systému" msgstr "Priamo prepnúť na predchádzajúci ovládací prvok systému"
# description # description
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Skryť všetky normálne okná" msgstr "Skryť všetky normálne okná"
# description # description
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Prepnúť na pracovný priestor č. 1" msgstr "Prepnúť na pracovný priestor č. 1"
# description # description
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Prepnúť na pracovný priestor č. 2" msgstr "Prepnúť na pracovný priestor č. 2"
# description # description
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Prepnúť na pracovný priestor č. 3" msgstr "Prepnúť na pracovný priestor č. 3"
# description # description
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Prepnúť na pracovný priestor č. 4" msgstr "Prepnúť na pracovný priestor č. 4"
# description # description
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Prepnúť na posledný pracovný priestor" msgstr "Prepnúť na posledný pracovný priestor"
# description # description
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Presunúť na pracovný priestor vľavo"
# description
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Presunúť na pracovný priestor vpravo"
# description
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Presunúť na pracovný priestor hore" msgstr "Presunúť na pracovný priestor hore"
# description # description
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Presunúť na pracovný priestor dole" msgstr "Presunúť na pracovný priestor dole"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Systém" msgstr "Systém"
@@ -230,6 +209,10 @@ msgstr "Zobraziť riadok pre spustenie príkazu"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Zobraziť prehľad aktivít" msgstr "Zobraziť prehľad aktivít"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Obnoviť klávesové skratky"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Okná" msgstr "Okná"
@@ -261,66 +244,61 @@ msgstr "Obnoviť okno"
# description # description
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Prepnúť stav zatienenia"
# description
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Zatvoriť okno" msgstr "Zatvoriť okno"
# description # description
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Skryť okno" msgstr "Skryť okno"
# description # description
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Presunúť okno" msgstr "Presunúť okno"
# description # description
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Zmeniť veľkosť okna" msgstr "Zmeniť veľkosť okna"
# description # description
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Prepnúť okno na všetky pracovné priestory alebo len na jeden" msgstr "Prepnúť okno na všetky pracovné priestory alebo len na jeden"
# description # description
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Presunúť okno dopredu ak je zakryté, inak presunúť dozadu" msgstr "Presunúť okno dopredu ak je zakryté, inak presunúť dozadu"
# description # description
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Presunúť okno nad ostatné okná" msgstr "Presunúť okno nad ostatné okná"
# description # description
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Presunúť okno pod ostatné okná" msgstr "Presunúť okno pod ostatné okná"
# description # description
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Maximalizovať okno zvisle" msgstr "Maximalizovať okno zvisle"
# description # description
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Maximalizovať okno vodorovne" msgstr "Maximalizovať okno vodorovne"
# Description # Description
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Zobraziť rozdelenie naľavo" msgstr "Zobraziť rozdelenie naľavo"
# Description # Description
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Zobraziť rozdelenie napravo" msgstr "Zobraziť rozdelenie napravo"
@@ -490,26 +468,29 @@ msgid ""
"proof. Currently possible keywords: • “scale-monitor-framebuffer” — makes " "proof. Currently possible keywords: • “scale-monitor-framebuffer” — makes "
"mutter default to layout logical monitors in a logical pixel coordinate " "mutter default to layout logical monitors in a logical pixel coordinate "
"space, while scaling monitor framebuffers instead of window content, to " "space, while scaling monitor framebuffers instead of window content, to "
"manage HiDPI monitors. Does not require a restart." "manage HiDPI monitors. Does not require a restart. • “remote-desktop” — "
"enables remote desktop support. To support remote desktop with screen "
"sharing, “screen-cast” must also be enabled. • “screen-cast” — enables "
"screen cast support."
msgstr "" msgstr ""
# summary # summary
#: data/org.gnome.mutter.gschema.xml.in:141 #: data/org.gnome.mutter.gschema.xml.in:145
msgid "Select window from tab popup" msgid "Select window from tab popup"
msgstr "Vybrať okno z rozbaľovacej ponuky tabulátora" msgstr "Vybrať okno z rozbaľovacej ponuky tabulátora"
# summary # summary
#: data/org.gnome.mutter.gschema.xml.in:146 #: data/org.gnome.mutter.gschema.xml.in:150
msgid "Cancel tab popup" msgid "Cancel tab popup"
msgstr "Zrušit rozbaľovaciu ponuku tabulátora" msgstr "Zrušit rozbaľovaciu ponuku tabulátora"
# PK: predpokladam ze to prepisane medzi tlacidlami # PK: predpokladam ze to prepisane medzi tlacidlami
# description # description
#: data/org.gnome.mutter.gschema.xml.in:151 #: data/org.gnome.mutter.gschema.xml.in:155
msgid "Switch monitor configurations" msgid "Switch monitor configurations"
msgstr "Prepnúť nastavenia monitorov" msgstr "Prepnúť nastavenia monitorov"
#: data/org.gnome.mutter.gschema.xml.in:156 #: data/org.gnome.mutter.gschema.xml.in:160
msgid "Rotates the built-in monitor configuration" msgid "Rotates the built-in monitor configuration"
msgstr "Otočí nastavenie vstavaného monitora" msgstr "Otočí nastavenie vstavaného monitora"
@@ -572,10 +553,41 @@ msgstr "Prepnúť na VT č. 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Znovu povoliť klávesové skratky" msgstr "Znovu povoliť klávesové skratky"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr ""
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Prepínač režimu (skupina č. %d)" msgstr "Prepínač režimu (skupina č. %d)"
@@ -585,37 +597,37 @@ msgstr "Prepínač režimu (skupina č. %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Prepnúť monitor" msgstr "Prepnúť monitor"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Zobraziť pomocníka na obrazovke" msgstr "Zobraziť pomocníka na obrazovke"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Vstavaný displej" msgstr "Vstavaný displej"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Neznámy" msgstr "Neznámy"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Neznámy displej" msgstr "Neznámy displej"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -633,48 +645,52 @@ msgid "Failed to open X Window System display “%s”\n"
msgstr "Zlyhalo otvorenie displeja systému na správu okien X „%s“\n" msgstr "Zlyhalo otvorenie displeja systému na správu okien X „%s“\n"
# cmd desc # cmd desc
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Zakáže pripojenia k správcovi relácií" msgstr "Zakáže pripojenia k správcovi relácií"
# cmd desc # cmd desc
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Nahradí bežiaceho správcu okien" msgstr "Nahradí bežiaceho správcu okien"
# cmd desc # cmd desc
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Zadá identifikátor správy relácií" msgstr "Zadá identifikátor správy relácií"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "X displej, ktorý bude použitý" msgstr "X displej, ktorý bude použitý"
# cmd desc # cmd desc
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Inicializuje reláciu z uloženého súboru" msgstr "Inicializuje reláciu z uloženého súboru"
# cmd desc # cmd desc
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Použije synchrónne volania X" msgstr "Použije synchrónne volania X"
# cmd desc # cmd desc
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Spustí ako kompozitor protokolu wayland" msgstr "Spustí ako kompozitor protokolu wayland"
# cmd desc # cmd desc
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Spustí ako kompozitor s vnoreným režimom" msgstr "Spustí ako kompozitor s vnoreným režimom"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Spustí ako plnohodnotný zobrazovací server, namiesto vnoreného režimu" msgstr "Spustí ako plnohodnotný zobrazovací server, namiesto vnoreného režimu"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Spustí s obslužným programom X11"
# %s is a window title # %s is a window title
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
@@ -731,7 +747,7 @@ msgstr "Použije zásuvný modul Mutter"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Pracovný priestor č. %d" msgstr "Pracovný priestor č. %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -740,7 +756,7 @@ msgstr ""
"Displej „%s“ už má správcu okien. Skúste použiť prepínač --replace, aby sa " "Displej „%s“ už má správcu okien. Skúste použiť prepínač --replace, aby sa "
"aktuálny správca nahradil." "aktuálny správca nahradil."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Obrazovka č. %d na displeji „%s“ nie je platná\n" msgstr "Obrazovka č. %d na displeji „%s“ nie je platná\n"
@@ -754,7 +770,7 @@ msgstr "Mutter bol skompilovaný bez výpisu podrobností pri behu\n"
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Prepínač režimu: Režim č. %d" msgstr "Prepínač režimu: Režim č. %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -768,6 +784,26 @@ msgstr ""
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (na %s)" msgstr "%s (na %s)"
# description
#~ msgid "Move window one workspace to the left"
#~ msgstr "Presunúť okno o jeden pracovný priestor vľavo"
# description
#~ msgid "Move window one workspace to the right"
#~ msgstr "Presunúť okno o jeden pracovný priestor vpravo"
# description
#~ msgid "Move to workspace left"
#~ msgstr "Presunúť na pracovný priestor vľavo"
# description
#~ msgid "Move to workspace right"
#~ msgstr "Presunúť na pracovný priestor vpravo"
# description
#~ msgid "Toggle shaded state"
#~ msgstr "Prepnúť stav zatienenia"
#~ msgid "background texture could not be created from file" #~ msgid "background texture could not be created from file"
#~ msgstr "nepodarilo sa vytvoriť textúru pozadia zo súboru" #~ msgstr "nepodarilo sa vytvoriť textúru pozadia zo súboru"

218
po/sl.po
View File

@@ -4,15 +4,14 @@
# #
# Andraž Tori <andraz.tori1@guest.arnes.si>, 2000. # Andraž Tori <andraz.tori1@guest.arnes.si>, 2000.
# Matjaž Horvat <m@owca.info>, 2006. # Matjaž Horvat <m@owca.info>, 2006.
# Matej Urbančič <mateju@svn.gnome.org>, 20072017. # Matej Urbančič <mateju@svn.gnome.org>, 20072018.
# #
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter master\n" "Project-Id-Version: mutter master\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-04-03 20:43+0000\n"
"POT-Creation-Date: 2017-09-08 11:30+0200\n" "PO-Revision-Date: 2018-04-09 20:28+0200\n"
"PO-Revision-Date: 2017-09-08 11:36+0200\n"
"Last-Translator: Matej Urbančič <mateju@svn.gnome.org>\n" "Last-Translator: Matej Urbančič <mateju@svn.gnome.org>\n"
"Language-Team: Slovenian GNOME Translation Team <gnome-si@googlegroups.com>\n" "Language-Team: Slovenian GNOME Translation Team <gnome-si@googlegroups.com>\n"
"Language: sl_SI\n" "Language: sl_SI\n"
@@ -22,7 +21,7 @@ msgstr ""
"Plural-Forms: nplurals=4; plural=(n%100==1 ? 1 : n%100==2 ? 2 : n%100==3 || n" "Plural-Forms: nplurals=4; plural=(n%100==1 ? 1 : n%100==2 ? 2 : n%100==3 || n"
"%100==4 ? 3 : 0);\n" "%100==4 ? 3 : 0);\n"
"X-Poedit-SourceCharset: utf-8\n" "X-Poedit-SourceCharset: utf-8\n"
"X-Generator: Poedit 2.0.1\n" "X-Generator: Poedit 2.0.6\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
@@ -49,134 +48,118 @@ msgid "Move window to last workspace"
msgstr "Premakni okno na zadnjo delovno površino" msgstr "Premakni okno na zadnjo delovno površino"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Premakni okno eno delovno površino levo"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Premakni okno eno delovno površino desno"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Premakni okno eno delovno površino navzgor" msgstr "Premakni okno eno delovno površino navzgor"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Prestavi okno eno delovno površino navzdol" msgstr "Prestavi okno eno delovno površino navzdol"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Premakni okno en zaslon levo" msgstr "Premakni okno en zaslon levo"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Premakni okno en zaslon desno" msgstr "Premakni okno en zaslon desno"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Premakni okno en zaslon navzgor" msgstr "Premakni okno en zaslon navzgor"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Prestavi okno en zaslon navzdol" msgstr "Prestavi okno en zaslon navzdol"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Preklopi programe" msgstr "Preklopi programe"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Preklopi na prejšnji program" msgstr "Preklopi na prejšnji program"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Preklopi okna" msgstr "Preklopi okna"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Preklopi na prejšnje okno" msgstr "Preklopi na prejšnje okno"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Preklopi okna programa" msgstr "Preklopi okna programa"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Preklopi na predhodno okno programa" msgstr "Preklopi na predhodno okno programa"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Preklopi tipkovne bližnjice" msgstr "Preklopi tipkovne bližnjice"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Preklopi na predhodno sistemsko okno" msgstr "Preklopi na predhodno sistemsko okno"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Preklopi okna neposredno" msgstr "Preklopi okna neposredno"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Preklopi na predhodno okno" msgstr "Preklopi na predhodno okno"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Preklopi okna programa neposredno" msgstr "Preklopi okna programa neposredno"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Preklopi na predhodno okno programa" msgstr "Preklopi na predhodno okno programa"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Preklopi tipkovne bližnjice neposredno" msgstr "Preklopi tipkovne bližnjice neposredno"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Preklopi na predhodno sistemsko okno" msgstr "Preklopi na predhodno sistemsko okno"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Skrij vsa običajna okna" msgstr "Skrij vsa običajna okna"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Preklopi na delovno površino 1" msgstr "Preklopi na delovno površino 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Preklopi na delovno površino 2" msgstr "Preklopi na delovno površino 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Preklopi na delovno površino 3" msgstr "Preklopi na delovno površino 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Preklopi na delovno površino 4" msgstr "Preklopi na delovno površino 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Preklopi na zadnjo delovno površino" msgstr "Preklopi na zadnjo delovno površino"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Premakni na levo delovno površino"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Premakni na desno delovno površino"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Premakni na zgornjo delovno površino" msgstr "Premakni na zgornjo delovno površino"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Premakni na spodnjo delovno površino" msgstr "Premakni na spodnjo delovno površino"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sistem" msgstr "Sistem"
@@ -188,6 +171,10 @@ msgstr "Pokaži možnost zagona ukazne vrstice"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Pokaži okno pregleda dejavnosti" msgstr "Pokaži okno pregleda dejavnosti"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Obnovi tipkovne bližnjice"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Okna" msgstr "Okna"
@@ -214,54 +201,50 @@ msgid "Restore window"
msgstr "Obnovi okno" msgstr "Obnovi okno"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Preklopi stanje senčenja"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Zapri okno" msgstr "Zapri okno"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Skrij okno" msgstr "Skrij okno"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Premakni okno" msgstr "Premakni okno"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Spremeni velikost okna" msgstr "Spremeni velikost okna"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Preklopi okno na vse delovne površine oziroma le na eno" msgstr "Preklopi okno na vse delovne površine oziroma le na eno"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Dvigni okno, če ga prekriva drugo okno, sicer ga spusti" msgstr "Dvigni okno, če ga prekriva drugo okno, sicer ga spusti"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Dvigni okno nad druga okna" msgstr "Dvigni okno nad druga okna"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Spusti okno pod druga" msgstr "Spusti okno pod druga"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Razpni okno navpično" msgstr "Razpni okno navpično"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Razpni okno vodoravno" msgstr "Razpni okno vodoravno"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Poglej razdelek na levi" msgstr "Poglej razdelek na levi"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Poglej razdelek na desni" msgstr "Poglej razdelek na desni"
@@ -496,10 +479,54 @@ msgstr "Preklopi na VT 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Ponovno omogoči tipkovne bližnjice" msgstr "Ponovno omogoči tipkovne bližnjice"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Dovoli zajemanje z XWayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Upošteva zajeme s tipkovnico, ki jih sprožijo programi X11, zagnani v okolju "
"Xwayland. Če naj se programski zajem upošteva, mora odjemalec ali poslati "
"specifično sporočilo X11 na korensko okno ali pa mora biti zaveden na "
"seznamu programov v ključu »xwayland-garb-access-rules«."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Program XWayland ima dovoljenje za zajemanje s tipkovnico"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Seznam imen ali razredov virov oken X11, ki lahko sprožijo zajeme v okolju "
"Xwayland. Ime oziroma razred vira podanega okna X11 je mogoče pridobiti z "
"ukazom »xprop WM_CLASS«. Uporaba pomožnih znakov » * « in » ? « je podprta. "
"Vrednosti, ki se začnejo z znakom » ! « so uvrščeni na črni seznam. Ta "
"seznam je obravnavan prednostno pred belim seznamom in prekliče zajeme na "
"seznamu sistema. Privzeti seznam vključuje ključ: "
"»@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@« Uporabniki lahko prekinejo obstoječi "
"zajem z uporabo posebne tipkovne bližnjice, določene s tipkovnim ključem "
"»restore-shortcuts«."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2325
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Preklop načina (skupina %d)" msgstr "Preklop načina (skupina %d)"
@@ -507,37 +534,37 @@ msgstr "Preklop načina (skupina %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2348
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Nadzornik preklopa" msgstr "Nadzornik preklopa"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2350
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Pokaži zaslonsko pomoč" msgstr "Pokaži zaslonsko pomoč"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Vgrajen zaslon" msgstr "Vgrajen zaslon"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Neznano" msgstr "Neznano"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Neznan zaslon" msgstr "Neznan zaslon"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -553,42 +580,46 @@ msgstr "Dogodek zvonjenja"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Odpiranje zaslona »%s« okenskega sistema X je spodletelo\n" msgstr "Odpiranje zaslona »%s« okenskega sistema X je spodletelo\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Onemogoči povezavo z upravljalnikom sej" msgstr "Onemogoči povezavo z upravljalnikom sej"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Zamenjaj trenutni upravljalnik oken" msgstr "Zamenjaj trenutni upravljalnik oken"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Navedite ID upravljanja seje" msgstr "Navedite ID upravljanja seje"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Zaslon X za uporabo" msgstr "Zaslon X za uporabo"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Začni sejo iz shranjene datoteke" msgstr "Začni sejo iz shranjene datoteke"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Uskladi klice X" msgstr "Uskladi klice X"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Zaženi izbirnik wayland" msgstr "Zaženi izbirnik wayland"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Zaženi kot gnezden vpisovalnik" msgstr "Zaženi kot gnezden vpisovalnik"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Zaženi kot polni strežnik zaslona in ne vstavljeno" msgstr "Zaženi kot polni strežnik zaslona in ne vstavljeno"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Zaženi z zaledjem X11"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -643,7 +674,7 @@ msgstr "Vstavek Mutter za uporabo"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Delovna površina %d" msgstr "Delovna površina %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -652,7 +683,7 @@ msgstr ""
"Zaslon »%s« že ima določen upravljalnik oken; poskušajte uporabiti možnost --" "Zaslon »%s« že ima določen upravljalnik oken; poskušajte uporabiti možnost --"
"replace za zamenjavo trenutnega upravljalnika zaslona." "replace za zamenjavo trenutnega upravljalnika zaslona."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Zaslon %d na prikazu »%s« ni veljaven\n" msgstr "Zaslon %d na prikazu »%s« ni veljaven\n"
@@ -662,13 +693,13 @@ msgid "Mutter was compiled without support for verbose mode\n"
msgstr "" msgstr ""
"Program Mutter je kodno preveden brez podpore za podrobni način izpisovanja\n" "Program Mutter je kodno preveden brez podpore za podrobni način izpisovanja\n"
#: src/wayland/meta-wayland-tablet-pad.c:563 #: src/wayland/meta-wayland-tablet-pad.c:567
#, c-format #, c-format
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Način preklopa: način %d" msgstr "Način preklopa: način %d"
# G:2 K:6 O:0 # G:2 K:6 O:0
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -681,6 +712,21 @@ msgstr ""
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (na %s)" msgstr "%s (na %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Premakni okno eno delovno površino levo"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Premakni okno eno delovno površino desno"
#~ msgid "Move to workspace left"
#~ msgstr "Premakni na levo delovno površino"
#~ msgid "Move to workspace right"
#~ msgstr "Premakni na desno delovno površino"
#~ msgid "Toggle shaded state"
#~ msgstr "Preklopi stanje senčenja"
#~ msgid "Failed to scan themes directory: %s\n" #~ msgid "Failed to scan themes directory: %s\n"
#~ msgstr "Ni mogoče preiskati mape tem: %s\n" #~ msgstr "Ni mogoče preiskati mape tem: %s\n"

215
po/sr.po
View File

@@ -9,10 +9,9 @@
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter\n" "Project-Id-Version: mutter\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-06 04:14+0000\n"
"POT-Creation-Date: 2017-08-29 16:09+0000\n" "PO-Revision-Date: 2018-02-21 21:58+0100\n"
"PO-Revision-Date: 2017-08-29 20:46+0200\n"
"Last-Translator: Марко М. Костић <marko.m.kostic@gmail.com>\n" "Last-Translator: Марко М. Костић <marko.m.kostic@gmail.com>\n"
"Language-Team: српски <gnome-sr@googlegroups.org>\n" "Language-Team: српски <gnome-sr@googlegroups.org>\n"
"Language: sr\n" "Language: sr\n"
@@ -22,7 +21,7 @@ msgstr ""
"Plural-Forms: nplurals=4; plural=n==1? 3 : n%10==1 && n%100!=11 ? 0 : n" "Plural-Forms: nplurals=4; plural=n==1? 3 : n%10==1 && n%100!=11 ? 0 : n"
"%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
"X-Project-Style: gnome\n" "X-Project-Style: gnome\n"
"X-Generator: Poedit 2.0.3\n" "X-Generator: Poedit 2.0.6\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
@@ -49,134 +48,118 @@ msgid "Move window to last workspace"
msgstr "Премешта прозор на последњи радни простор" msgstr "Премешта прозор на последњи радни простор"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Премешта прозор један радни простор на лево"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Премешта прозор један радни простор на десно"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Премешта прозор један радни простор на горе" msgstr "Премешта прозор један радни простор на горе"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Премешта прозор један радни простор на доле" msgstr "Премешта прозор један радни простор на доле"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Премешта прозор један монитор на лево" msgstr "Премешта прозор један монитор на лево"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Премешта прозор један монитор на десно" msgstr "Премешта прозор један монитор на десно"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Премешта прозор један монитор на горе" msgstr "Премешта прозор један монитор на горе"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Премешта прозор један монитор на доле" msgstr "Премешта прозор један монитор на доле"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Пребацује програме" msgstr "Пребацује програме"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Пребацује на претходни програм" msgstr "Пребацује на претходни програм"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Пребацује прозоре" msgstr "Пребацује прозоре"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Пребацује на претходни прозор" msgstr "Пребацује на претходни прозор"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Пребацује прозоре програма" msgstr "Пребацује прозоре програма"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Пребацује на претходни прозор програма" msgstr "Пребацује на претходни прозор програма"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Пребацује контроле система" msgstr "Пребацује контроле система"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Пребацује на претходну контролу система" msgstr "Пребацује на претходну контролу система"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Пребацује прозоре директно" msgstr "Пребацује прозоре директно"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Пребацује непосредно на претходни прозор" msgstr "Пребацује непосредно на претходни прозор"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Пребацује прозоре програма директно" msgstr "Пребацује прозоре програма директно"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Пребацује непосредно на претходни прозор програма" msgstr "Пребацује непосредно на претходни прозор програма"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Пребацује контроле система директно" msgstr "Пребацује контроле система директно"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Пребацује непосредно на претходну контролу система" msgstr "Пребацује непосредно на претходну контролу система"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Скрива све обичне прозоре" msgstr "Скрива све обичне прозоре"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Пребацује се на радни простор 1" msgstr "Пребацује се на радни простор 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Пребацује се на радни простор 2" msgstr "Пребацује се на радни простор 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Пребацује се на радни простор 3" msgstr "Пребацује се на радни простор 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Пребацује се на радни простор 4" msgstr "Пребацује се на радни простор 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Пребацује се на последњи радни простор" msgstr "Пребацује се на последњи радни простор"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Премешта на радни простор лево"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Премешта на радни простор десно"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Премешта на радни простор изнад" msgstr "Премешта на радни простор изнад"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Премешта на радни простор испод" msgstr "Премешта на радни простор испод"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Систем" msgstr "Систем"
@@ -188,6 +171,10 @@ msgstr "Приказује упит за извршавање наредбе"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Приказује преглед активности" msgstr "Приказује преглед активности"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Поврати пречице на тастатури"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Прозори" msgstr "Прозори"
@@ -213,54 +200,50 @@ msgid "Restore window"
msgstr "Враћа величину прозора" msgstr "Враћа величину прозора"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Искључује или укључује стање засенчености"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Затвара прозор" msgstr "Затвара прозор"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Скрива прозор" msgstr "Скрива прозор"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Премешта прозор" msgstr "Премешта прозор"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Мења величину прозора" msgstr "Мења величину прозора"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Приказује прозор на свим радним просторима или само на једном" msgstr "Приказује прозор на свим радним просторима или само на једном"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Издиже прозор уколико га други прозор заклања, у противном га спушта" msgstr "Издиже прозор уколико га други прозор заклања, у противном га спушта"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Издиже прозор изнад осталих прозора" msgstr "Издиже прозор изнад осталих прозора"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Спушта прозор испод осталих прозора" msgstr "Спушта прозор испод осталих прозора"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Увећава прозор вертикално" msgstr "Увећава прозор вертикално"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Увећава прозор хоризонтално" msgstr "Увећава прозор хоризонтално"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Прикажите поделу на лево" msgstr "Прикажите поделу на лево"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Прикажите поделу на десно" msgstr "Прикажите поделу на десно"
@@ -500,10 +483,55 @@ msgstr "Прелазак на ВТ 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Поново укључивање пречица" msgstr "Поново укључивање пречица"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Дозволи грабљење на Икс-вејленду"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Дозволи да се узму у обзир грабљења од стране Икс11 програма унутар Икс-"
"вејленда. Да би се Икс11 грабљење узело у обзир под Вејлендом, клијент мора "
"такође послати специфичну Икс11 клијентску поруку ка кореном прозору или "
"мора бити на белом списку програма у кључу „xwayland-grab-access-rules“."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Икс-вејленд програми којима је дозвољено да раде грабљења на тастатури"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Списак назива ресурса или класи ресурса Икс11 прозора којима је дозвољено "
"или забрањено да раде грабљења на тастатури под Икс-вејлендом. Назив ресурса "
"или класа ресурса датог Икс11 прозора се може наћи преко наредбе \"xprop "
"WM_CLASS\". Џокер знакови „*“ и „?“ унутар вредности су подржани. Вредности "
"које почињу са „!“ се стављају на црни списак, који има предност у односу на "
"бели списак, за опозив програма за подразумеваног системског списка. "
"Подразумевани системски списак садржи следеће програме: "
"\"@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@\" Корисници могу сломити постојеће "
"грабљење тако што ће употребити посебну пречицу на тастатури која је "
"наведена у кључу за везивање тастера са називом \"restore-shortcuts\"."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2260
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Режим прекидача (група %d)" msgstr "Режим прекидача (група %d)"
@@ -511,37 +539,37 @@ msgstr "Режим прекидача (група %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2283
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Промени монитор" msgstr "Промени монитор"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2285
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Прикажи помоћ на екрану" msgstr "Прикажи помоћ на екрану"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Уграђени дисплеј" msgstr "Уграђени дисплеј"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Непознато" msgstr "Непознато"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Непознат дисплеј" msgstr "Непознат дисплеј"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -557,42 +585,46 @@ msgstr "Звонца"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Нисам успео да отворим екран „%s“ Икс система прозора\n" msgstr "Нисам успео да отворим екран „%s“ Икс система прозора\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Искључује везу са управником сесије" msgstr "Искључује везу са управником сесије"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Мења текућег управника прозорима" msgstr "Мења текућег управника прозорима"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Наводи ИБ управника сесије" msgstr "Наводи ИБ управника сесије"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Икс екран који ће бити коришћен" msgstr "Икс екран који ће бити коришћен"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Покреће сесију из датотеке чувања" msgstr "Покреће сесију из датотеке чувања"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Чини Икс позиве усклађеним" msgstr "Чини Икс позиве усклађеним"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Ради као вајландов саставник" msgstr "Ради као вајландов саставник"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Ради као угнеждени саставник" msgstr "Ради као угнеждени саставник"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Ради као пуни сервер приказа, уместо као угнеждени" msgstr "Ради као пуни сервер приказа, уместо као угнеждени"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Покрени на Икс11 позадинцу"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -647,7 +679,7 @@ msgstr "Прикључци Матера за коришћење"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "%d. радни простор" msgstr "%d. радни простор"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -656,7 +688,7 @@ msgstr ""
"Приказ „%s“ већ има управника прозора; пробајте да користите опцију „--" "Приказ „%s“ већ има управника прозора; пробајте да користите опцију „--"
"replace“ да замените тренутног управника прозора." "replace“ да замените тренутног управника прозора."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Приказ „%d“ на екрану „%s“ није исправан\n" msgstr "Приказ „%d“ на екрану „%s“ није исправан\n"
@@ -670,7 +702,7 @@ msgstr "Матер је преведен без подршке за опшира
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Режим прекидача: Режим %d" msgstr "Режим прекидача: Режим %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -683,6 +715,21 @@ msgstr ""
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (на %s)" msgstr "%s (на %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Премешта прозор један радни простор на лево"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Премешта прозор један радни простор на десно"
#~ msgid "Move to workspace left"
#~ msgstr "Премешта на радни простор лево"
#~ msgid "Move to workspace right"
#~ msgstr "Премешта на радни простор десно"
#~ msgid "Toggle shaded state"
#~ msgstr "Искључује или укључује стање засенчености"
#~ msgid "Failed to scan themes directory: %s\n" #~ msgid "Failed to scan themes directory: %s\n"
#~ msgstr "Нисам успео да прочитам директоријум тема: %s\n" #~ msgstr "Нисам успео да прочитам директоријум тема: %s\n"

View File

@@ -9,10 +9,9 @@
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter\n" "Project-Id-Version: mutter\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-21 15:53+0000\n"
"POT-Creation-Date: 2017-08-29 16:15+0000\n" "PO-Revision-Date: 2018-02-21 21:58+0100\n"
"PO-Revision-Date: 2017-08-29 20:46+0200\n"
"Last-Translator: Marko M. Kostić <marko.m.kostic@gmail.com>\n" "Last-Translator: Marko M. Kostić <marko.m.kostic@gmail.com>\n"
"Language-Team: srpski <gnome-sr@googlegroups.org>\n" "Language-Team: srpski <gnome-sr@googlegroups.org>\n"
"Language: sr\n" "Language: sr\n"
@@ -22,7 +21,7 @@ msgstr ""
"Plural-Forms: nplurals=4; plural=n==1? 3 : n%10==1 && n%100!=11 ? 0 : n" "Plural-Forms: nplurals=4; plural=n==1? 3 : n%10==1 && n%100!=11 ? 0 : n"
"%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n" "%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
"X-Project-Style: gnome\n" "X-Project-Style: gnome\n"
"X-Generator: Poedit 2.0.3\n" "X-Generator: Poedit 2.0.6\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
@@ -49,134 +48,118 @@ msgid "Move window to last workspace"
msgstr "Premešta prozor na poslednji radni prostor" msgstr "Premešta prozor na poslednji radni prostor"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Premešta prozor jedan radni prostor na levo"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Premešta prozor jedan radni prostor na desno"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Premešta prozor jedan radni prostor na gore" msgstr "Premešta prozor jedan radni prostor na gore"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Premešta prozor jedan radni prostor na dole" msgstr "Premešta prozor jedan radni prostor na dole"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Premešta prozor jedan monitor na levo" msgstr "Premešta prozor jedan monitor na levo"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Premešta prozor jedan monitor na desno" msgstr "Premešta prozor jedan monitor na desno"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Premešta prozor jedan monitor na gore" msgstr "Premešta prozor jedan monitor na gore"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Premešta prozor jedan monitor na dole" msgstr "Premešta prozor jedan monitor na dole"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Prebacuje programe" msgstr "Prebacuje programe"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Prebacuje na prethodni program" msgstr "Prebacuje na prethodni program"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Prebacuje prozore" msgstr "Prebacuje prozore"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Prebacuje na prethodni prozor" msgstr "Prebacuje na prethodni prozor"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Prebacuje prozore programa" msgstr "Prebacuje prozore programa"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Prebacuje na prethodni prozor programa" msgstr "Prebacuje na prethodni prozor programa"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Prebacuje kontrole sistema" msgstr "Prebacuje kontrole sistema"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Prebacuje na prethodnu kontrolu sistema" msgstr "Prebacuje na prethodnu kontrolu sistema"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Prebacuje prozore direktno" msgstr "Prebacuje prozore direktno"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Prebacuje neposredno na prethodni prozor" msgstr "Prebacuje neposredno na prethodni prozor"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Prebacuje prozore programa direktno" msgstr "Prebacuje prozore programa direktno"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Prebacuje neposredno na prethodni prozor programa" msgstr "Prebacuje neposredno na prethodni prozor programa"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Prebacuje kontrole sistema direktno" msgstr "Prebacuje kontrole sistema direktno"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Prebacuje neposredno na prethodnu kontrolu sistema" msgstr "Prebacuje neposredno na prethodnu kontrolu sistema"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Skriva sve obične prozore" msgstr "Skriva sve obične prozore"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Prebacuje se na radni prostor 1" msgstr "Prebacuje se na radni prostor 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Prebacuje se na radni prostor 2" msgstr "Prebacuje se na radni prostor 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Prebacuje se na radni prostor 3" msgstr "Prebacuje se na radni prostor 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Prebacuje se na radni prostor 4" msgstr "Prebacuje se na radni prostor 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Prebacuje se na poslednji radni prostor" msgstr "Prebacuje se na poslednji radni prostor"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Premešta na radni prostor levo"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Premešta na radni prostor desno"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Premešta na radni prostor iznad" msgstr "Premešta na radni prostor iznad"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Premešta na radni prostor ispod" msgstr "Premešta na radni prostor ispod"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "Sistem" msgstr "Sistem"
@@ -188,6 +171,10 @@ msgstr "Prikazuje upit za izvršavanje naredbe"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Prikazuje pregled aktivnosti" msgstr "Prikazuje pregled aktivnosti"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Povrati prečice na tastaturi"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Prozori" msgstr "Prozori"
@@ -213,54 +200,50 @@ msgid "Restore window"
msgstr "Vraća veličinu prozora" msgstr "Vraća veličinu prozora"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Isključuje ili uključuje stanje zasenčenosti"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Zatvara prozor" msgstr "Zatvara prozor"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Skriva prozor" msgstr "Skriva prozor"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Premešta prozor" msgstr "Premešta prozor"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Menja veličinu prozora" msgstr "Menja veličinu prozora"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Prikazuje prozor na svim radnim prostorima ili samo na jednom" msgstr "Prikazuje prozor na svim radnim prostorima ili samo na jednom"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Izdiže prozor ukoliko ga drugi prozor zaklanja, u protivnom ga spušta" msgstr "Izdiže prozor ukoliko ga drugi prozor zaklanja, u protivnom ga spušta"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Izdiže prozor iznad ostalih prozora" msgstr "Izdiže prozor iznad ostalih prozora"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Spušta prozor ispod ostalih prozora" msgstr "Spušta prozor ispod ostalih prozora"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Uvećava prozor vertikalno" msgstr "Uvećava prozor vertikalno"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Uvećava prozor horizontalno" msgstr "Uvećava prozor horizontalno"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Prikažite podelu na levo" msgstr "Prikažite podelu na levo"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Prikažite podelu na desno" msgstr "Prikažite podelu na desno"
@@ -500,10 +483,55 @@ msgstr "Prelazak na VT 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Ponovo uključivanje prečica" msgstr "Ponovo uključivanje prečica"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Dozvoli grabljenje na Iks-vejlendu"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Dozvoli da se uzmu u obzir grabljenja od strane Iks11 programa unutar Iks-"
"vejlenda. Da bi se Iks11 grabljenje uzelo u obzir pod Vejlendom, klijent mora "
"takođe poslati specifičnu Iks11 klijentsku poruku ka korenom prozoru ili "
"mora biti na belom spisku programa u ključu „xwayland-grab-access-rules“."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Iks-vejlend programi kojima je dozvoljeno da rade grabljenja na tastaturi"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Spisak naziva resursa ili klasi resursa Iks11 prozora kojima je dozvoljeno "
"ili zabranjeno da rade grabljenja na tastaturi pod Iks-vejlendom. Naziv resursa "
"ili klasa resursa datog Iks11 prozora se može naći preko naredbe \"xprop "
"WM_CLASS\". Džoker znakovi „*“ i „?“ unutar vrednosti su podržani. Vrednosti "
"koje počinju sa „!“ se stavljaju na crni spisak, koji ima prednost u odnosu na "
"beli spisak, za opoziv programa za podrazumevanog sistemskog spiska. "
"Podrazumevani sistemski spisak sadrži sledeće programe: "
"\"@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@\" Korisnici mogu slomiti postojeće "
"grabljenje tako što će upotrebiti posebnu prečicu na tastaturi koja je "
"navedena u ključu za vezivanje tastera sa nazivom \"restore-shortcuts\"."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2325
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Režim prekidača (grupa %d)" msgstr "Režim prekidača (grupa %d)"
@@ -511,37 +539,37 @@ msgstr "Režim prekidača (grupa %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2348
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Promeni monitor" msgstr "Promeni monitor"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2350
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Prikaži pomoć na ekranu" msgstr "Prikaži pomoć na ekranu"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Ugrađeni displej" msgstr "Ugrađeni displej"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Nepoznato" msgstr "Nepoznato"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Nepoznat displej" msgstr "Nepoznat displej"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -557,42 +585,46 @@ msgstr "Zvonca"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Nisam uspeo da otvorim ekran „%s“ Iks sistema prozora\n" msgstr "Nisam uspeo da otvorim ekran „%s“ Iks sistema prozora\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Isključuje vezu sa upravnikom sesije" msgstr "Isključuje vezu sa upravnikom sesije"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Menja tekućeg upravnika prozorima" msgstr "Menja tekućeg upravnika prozorima"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Navodi IB upravnika sesije" msgstr "Navodi IB upravnika sesije"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "Iks ekran koji će biti korišćen" msgstr "Iks ekran koji će biti korišćen"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Pokreće sesiju iz datoteke čuvanja" msgstr "Pokreće sesiju iz datoteke čuvanja"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Čini Iks pozive usklađenim" msgstr "Čini Iks pozive usklađenim"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Radi kao vajlandov sastavnik" msgstr "Radi kao vajlandov sastavnik"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Radi kao ugneždeni sastavnik" msgstr "Radi kao ugneždeni sastavnik"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Radi kao puni server prikaza, umesto kao ugneždeni" msgstr "Radi kao puni server prikaza, umesto kao ugneždeni"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Pokreni na Iks11 pozadincu"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -647,7 +679,7 @@ msgstr "Priključci Matera za korišćenje"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "%d. radni prostor" msgstr "%d. radni prostor"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -656,7 +688,7 @@ msgstr ""
"Prikaz „%s“ već ima upravnika prozora; probajte da koristite opciju „--" "Prikaz „%s“ već ima upravnika prozora; probajte da koristite opciju „--"
"replace“ da zamenite trenutnog upravnika prozora." "replace“ da zamenite trenutnog upravnika prozora."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Prikaz „%d“ na ekranu „%s“ nije ispravan\n" msgstr "Prikaz „%d“ na ekranu „%s“ nije ispravan\n"
@@ -665,12 +697,12 @@ msgstr "Prikaz „%d“ na ekranu „%s“ nije ispravan\n"
msgid "Mutter was compiled without support for verbose mode\n" msgid "Mutter was compiled without support for verbose mode\n"
msgstr "Mater je preveden bez podrške za opširan režim\n" msgstr "Mater je preveden bez podrške za opširan režim\n"
#: src/wayland/meta-wayland-tablet-pad.c:563 #: src/wayland/meta-wayland-tablet-pad.c:567
#, c-format #, c-format
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Režim prekidača: Režim %d" msgstr "Režim prekidača: Režim %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -683,6 +715,21 @@ msgstr ""
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (na %s)" msgstr "%s (na %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Premešta prozor jedan radni prostor na levo"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Premešta prozor jedan radni prostor na desno"
#~ msgid "Move to workspace left"
#~ msgstr "Premešta na radni prostor levo"
#~ msgid "Move to workspace right"
#~ msgstr "Premešta na radni prostor desno"
#~ msgid "Toggle shaded state"
#~ msgstr "Isključuje ili uključuje stanje zasenčenosti"
#~ msgid "Failed to scan themes directory: %s\n" #~ msgid "Failed to scan themes directory: %s\n"
#~ msgstr "Nisam uspeo da pročitam direktorijum tema: %s\n" #~ msgstr "Nisam uspeo da pročitam direktorijum tema: %s\n"

222
po/sv.po
View File

@@ -1,25 +1,24 @@
# Swedish messages for mutter. # Swedish messages for mutter.
# Copyright © 2001-2017 Free Software Foundation, Inc. # Copyright © 2001-2018 Free Software Foundation, Inc.
# Christian Rose <menthos@menthos.com>, 2001, 2002, 2003, 2004, 2005. # Christian Rose <menthos@menthos.com>, 2001, 2002, 2003, 2004, 2005.
# Daniel Nylander <po@danielnylander.se>, 2006, 2007, 2008, 2009, 2010, 2011, 2012. # Daniel Nylander <po@danielnylander.se>, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
# Mattias Eriksson <snaggen@gmail.com>, 2014. # Mattias Eriksson <snaggen@gmail.com>, 2014.
# Anders Jonsson <anders.jonsson@norsjovallen.se>, 2015, 2016, 2017. # Anders Jonsson <anders.jonsson@norsjovallen.se>, 2015, 2016, 2017, 2018.
# Sebastian Rasmussen <sebras@gmail.com>, 2016. # Sebastian Rasmussen <sebras@gmail.com>, 2016.
# #
msgid "" msgid ""
msgstr "" msgstr ""
"Project-Id-Version: mutter\n" "Project-Id-Version: mutter\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/mutter/issues\n"
"product=mutter&keywords=I18N+L10N&component=general\n" "POT-Creation-Date: 2018-02-20 20:33+0000\n"
"POT-Creation-Date: 2017-09-04 14:39+0000\n" "PO-Revision-Date: 2018-02-22 15:54+0100\n"
"PO-Revision-Date: 2017-09-05 00:14+0200\n"
"Last-Translator: Anders Jonsson <anders.jonsson@norsjovallen.se>\n" "Last-Translator: Anders Jonsson <anders.jonsson@norsjovallen.se>\n"
"Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n" "Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n"
"Language: sv\n" "Language: sv\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n" "Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.0.3\n" "X-Generator: Poedit 2.0.6\n"
#: data/50-mutter-navigation.xml:6 #: data/50-mutter-navigation.xml:6
msgid "Navigation" msgid "Navigation"
@@ -46,134 +45,118 @@ msgid "Move window to last workspace"
msgstr "Flytta fönster till sista arbetsyta" msgstr "Flytta fönster till sista arbetsyta"
#: data/50-mutter-navigation.xml:24 #: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Flytta fönster en arbetsyta åt vänster"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Flytta fönster en arbetsyta åt höger"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up" msgid "Move window one workspace up"
msgstr "Flytta fönster en arbetsyta uppåt" msgstr "Flytta fönster en arbetsyta uppåt"
#: data/50-mutter-navigation.xml:33 #: data/50-mutter-navigation.xml:27
msgid "Move window one workspace down" msgid "Move window one workspace down"
msgstr "Flytta fönster en arbetsyta nedåt" msgstr "Flytta fönster en arbetsyta nedåt"
#: data/50-mutter-navigation.xml:36 #: data/50-mutter-navigation.xml:30
msgid "Move window one monitor to the left" msgid "Move window one monitor to the left"
msgstr "Flytta fönster en skärm åt vänster" msgstr "Flytta fönster en skärm åt vänster"
#: data/50-mutter-navigation.xml:39 #: data/50-mutter-navigation.xml:33
msgid "Move window one monitor to the right" msgid "Move window one monitor to the right"
msgstr "Flytta fönster en skärm åt höger" msgstr "Flytta fönster en skärm åt höger"
#: data/50-mutter-navigation.xml:42 #: data/50-mutter-navigation.xml:36
msgid "Move window one monitor up" msgid "Move window one monitor up"
msgstr "Flytta fönster en skärm uppåt" msgstr "Flytta fönster en skärm uppåt"
#: data/50-mutter-navigation.xml:45 #: data/50-mutter-navigation.xml:39
msgid "Move window one monitor down" msgid "Move window one monitor down"
msgstr "Flytta fönster en skärm nedåt" msgstr "Flytta fönster en skärm nedåt"
#: data/50-mutter-navigation.xml:49 #: data/50-mutter-navigation.xml:43
msgid "Switch applications" msgid "Switch applications"
msgstr "Växla program" msgstr "Växla program"
#: data/50-mutter-navigation.xml:54 #: data/50-mutter-navigation.xml:48
msgid "Switch to previous application" msgid "Switch to previous application"
msgstr "Växla till föregående program" msgstr "Växla till föregående program"
#: data/50-mutter-navigation.xml:58 #: data/50-mutter-navigation.xml:52
msgid "Switch windows" msgid "Switch windows"
msgstr "Växla fönster" msgstr "Växla fönster"
#: data/50-mutter-navigation.xml:63 #: data/50-mutter-navigation.xml:57
msgid "Switch to previous window" msgid "Switch to previous window"
msgstr "Växla till föregående fönster" msgstr "Växla till föregående fönster"
#: data/50-mutter-navigation.xml:67 #: data/50-mutter-navigation.xml:61
msgid "Switch windows of an application" msgid "Switch windows of an application"
msgstr "Växla fönster för ett program" msgstr "Växla fönster för ett program"
#: data/50-mutter-navigation.xml:72 #: data/50-mutter-navigation.xml:66
msgid "Switch to previous window of an application" msgid "Switch to previous window of an application"
msgstr "Växla till föregående fönster för ett program" msgstr "Växla till föregående fönster för ett program"
#: data/50-mutter-navigation.xml:76 #: data/50-mutter-navigation.xml:70
msgid "Switch system controls" msgid "Switch system controls"
msgstr "Växla systemkontroller" msgstr "Växla systemkontroller"
#: data/50-mutter-navigation.xml:81 #: data/50-mutter-navigation.xml:75
msgid "Switch to previous system control" msgid "Switch to previous system control"
msgstr "Växla till föregående systemkontroll" msgstr "Växla till föregående systemkontroll"
#: data/50-mutter-navigation.xml:85 #: data/50-mutter-navigation.xml:79
msgid "Switch windows directly" msgid "Switch windows directly"
msgstr "Växla fönster direkt" msgstr "Växla fönster direkt"
#: data/50-mutter-navigation.xml:90 #: data/50-mutter-navigation.xml:84
msgid "Switch directly to previous window" msgid "Switch directly to previous window"
msgstr "Växla direkt till föregående fönster" msgstr "Växla direkt till föregående fönster"
#: data/50-mutter-navigation.xml:94 #: data/50-mutter-navigation.xml:88
msgid "Switch windows of an app directly" msgid "Switch windows of an app directly"
msgstr "Växla fönster för ett program direkt" msgstr "Växla fönster för ett program direkt"
#: data/50-mutter-navigation.xml:99 #: data/50-mutter-navigation.xml:93
msgid "Switch directly to previous window of an app" msgid "Switch directly to previous window of an app"
msgstr "Växla direkt till föregående fönster för ett program" msgstr "Växla direkt till föregående fönster för ett program"
#: data/50-mutter-navigation.xml:103 #: data/50-mutter-navigation.xml:97
msgid "Switch system controls directly" msgid "Switch system controls directly"
msgstr "Växla systemkontroller direkt" msgstr "Växla systemkontroller direkt"
#: data/50-mutter-navigation.xml:108 #: data/50-mutter-navigation.xml:102
msgid "Switch directly to previous system control" msgid "Switch directly to previous system control"
msgstr "Växla direkt till föregående systemkontroll" msgstr "Växla direkt till föregående systemkontroll"
#: data/50-mutter-navigation.xml:111 #: data/50-mutter-navigation.xml:105
msgid "Hide all normal windows" msgid "Hide all normal windows"
msgstr "Dölj alla normala fönster" msgstr "Dölj alla normala fönster"
#: data/50-mutter-navigation.xml:114 #: data/50-mutter-navigation.xml:108
msgid "Switch to workspace 1" msgid "Switch to workspace 1"
msgstr "Växla till arbetsyta 1" msgstr "Växla till arbetsyta 1"
#: data/50-mutter-navigation.xml:117 #: data/50-mutter-navigation.xml:111
msgid "Switch to workspace 2" msgid "Switch to workspace 2"
msgstr "Växla till arbetsyta 2" msgstr "Växla till arbetsyta 2"
#: data/50-mutter-navigation.xml:120 #: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 3" msgid "Switch to workspace 3"
msgstr "Växla till arbetsyta 3" msgstr "Växla till arbetsyta 3"
#: data/50-mutter-navigation.xml:123 #: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 4" msgid "Switch to workspace 4"
msgstr "Växla till arbetsyta 4" msgstr "Växla till arbetsyta 4"
#: data/50-mutter-navigation.xml:126 #: data/50-mutter-navigation.xml:120
msgid "Switch to last workspace" msgid "Switch to last workspace"
msgstr "Växla till sista arbetsyta" msgstr "Växla till sista arbetsyta"
#: data/50-mutter-navigation.xml:129 #: data/50-mutter-navigation.xml:123
msgid "Move to workspace left"
msgstr "Flytta till arbetsyta till vänster"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Flytta till arbetsyta till höger"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above" msgid "Move to workspace above"
msgstr "Flytta till arbetsyta ovanför" msgstr "Flytta till arbetsyta ovanför"
#: data/50-mutter-navigation.xml:138 #: data/50-mutter-navigation.xml:126
msgid "Move to workspace below" msgid "Move to workspace below"
msgstr "Flytta till arbetsyta nedanför" msgstr "Flytta till arbetsyta nedanför"
#: data/50-mutter-system.xml:6 #: data/50-mutter-system.xml:6 data/50-mutter-wayland.xml:6
msgid "System" msgid "System"
msgstr "System" msgstr "System"
@@ -185,6 +168,10 @@ msgstr "Visa Kör kommando-dialogen"
msgid "Show the activities overview" msgid "Show the activities overview"
msgstr "Visa aktivitetsöversikt" msgstr "Visa aktivitetsöversikt"
#: data/50-mutter-wayland.xml:8
msgid "Restore the keyboard shortcuts"
msgstr "Återställ tangentbordsgenvägarna"
#: data/50-mutter-windows.xml:6 #: data/50-mutter-windows.xml:6
msgid "Windows" msgid "Windows"
msgstr "Fönster" msgstr "Fönster"
@@ -210,54 +197,50 @@ msgid "Restore window"
msgstr "Återställ fönster" msgstr "Återställ fönster"
#: data/50-mutter-windows.xml:18 #: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Växla upprullat tillstånd"
#: data/50-mutter-windows.xml:20
msgid "Close window" msgid "Close window"
msgstr "Stäng fönster" msgstr "Stäng fönster"
#: data/50-mutter-windows.xml:22 #: data/50-mutter-windows.xml:20
msgid "Hide window" msgid "Hide window"
msgstr "Dölj fönster" msgstr "Dölj fönster"
#: data/50-mutter-windows.xml:24 #: data/50-mutter-windows.xml:22
msgid "Move window" msgid "Move window"
msgstr "Flytta fönster" msgstr "Flytta fönster"
#: data/50-mutter-windows.xml:26 #: data/50-mutter-windows.xml:24
msgid "Resize window" msgid "Resize window"
msgstr "Ändra storlek på fönster" msgstr "Ändra storlek på fönster"
#: data/50-mutter-windows.xml:29 #: data/50-mutter-windows.xml:27
msgid "Toggle window on all workspaces or one" msgid "Toggle window on all workspaces or one"
msgstr "Växla fönster på alla arbetsytor eller bara en" msgstr "Växla fönster på alla arbetsytor eller bara en"
#: data/50-mutter-windows.xml:31 #: data/50-mutter-windows.xml:29
msgid "Raise window if covered, otherwise lower it" msgid "Raise window if covered, otherwise lower it"
msgstr "Höj fönstret om det skyms av ett annat fönster, sänk det annars" msgstr "Höj fönstret om det skyms av ett annat fönster, sänk det annars"
#: data/50-mutter-windows.xml:33 #: data/50-mutter-windows.xml:31
msgid "Raise window above other windows" msgid "Raise window above other windows"
msgstr "Höj fönstret över andra fönster" msgstr "Höj fönstret över andra fönster"
#: data/50-mutter-windows.xml:35 #: data/50-mutter-windows.xml:33
msgid "Lower window below other windows" msgid "Lower window below other windows"
msgstr "Sänk fönster under andra fönster" msgstr "Sänk fönster under andra fönster"
#: data/50-mutter-windows.xml:37 #: data/50-mutter-windows.xml:35
msgid "Maximize window vertically" msgid "Maximize window vertically"
msgstr "Maximera fönster vertikalt" msgstr "Maximera fönster vertikalt"
#: data/50-mutter-windows.xml:39 #: data/50-mutter-windows.xml:37
msgid "Maximize window horizontally" msgid "Maximize window horizontally"
msgstr "Maximera fönster horisontellt" msgstr "Maximera fönster horisontellt"
#: data/50-mutter-windows.xml:43 #: data/50-mutter-windows.xml:41
msgid "View split on left" msgid "View split on left"
msgstr "Vy delad till vänster" msgstr "Vy delad till vänster"
#: data/50-mutter-windows.xml:47 #: data/50-mutter-windows.xml:45
msgid "View split on right" msgid "View split on right"
msgstr "Vy delad till höger" msgstr "Vy delad till höger"
@@ -497,10 +480,56 @@ msgstr "Växla till VT 12"
msgid "Re-enable shortcuts" msgid "Re-enable shortcuts"
msgstr "Återaktivera genvägar" msgstr "Återaktivera genvägar"
#: data/org.gnome.mutter.wayland.gschema.xml.in:64
msgid "Allow grabs with Xwayland"
msgstr "Tillåt fångster med Xwayland"
#: data/org.gnome.mutter.wayland.gschema.xml.in:65
msgid ""
"Allow keyboard grabs issued by X11 applications running in Xwayland to be "
"taken into account. For a X11 grab to be taken into account under Wayland, "
"the client must also either send a specific X11 ClientMessage to the root "
"window or be among the applications white-listed in key “xwayland-grab-"
"access-rules”."
msgstr ""
"Tillåt tangentbordsfångster utfärdade av X11-program som körs i Xwayland att "
"tas i beräkning. För att en X11-fångst ska tas i beräkning under Wayland "
"måste klienten också antingen sända ett specifikt X11-ClientMessage till "
"root-fönstret eller finnas bland programmen som vitlistats i nyckeln "
"”xwayland-grab-access-rules”."
#: data/org.gnome.mutter.wayland.gschema.xml.in:77
msgid "Xwayland applications allowed to issue keyboard grabs"
msgstr "Xwayland-program tillåts utfärda tangentbordsfångster"
#: data/org.gnome.mutter.wayland.gschema.xml.in:78
msgid ""
"List the resource names or resource class of X11 windows either allowed or "
"not allowed to issue X11 keyboard grabs under Xwayland. The resource name or "
"resource class of a given X11 window can be obtained using the command "
"“xprop WM_CLASS”. Wildcards “*” and jokers “?” in the values are supported. "
"Values starting with “!” are blacklisted, which has precedence over the "
"whitelist, to revoke applications from the default system list. The default "
"system list includes the following applications: "
"“@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Users can break an existing grab by "
"using the specific keyboard shortcut defined by the keybinding key “restore-"
"shortcuts”."
msgstr ""
"Lista resursnamnen eller resursklassen för X11-fönster som antingen tillåts "
"eller inte tillåts att utfärda X11-tangentbordsfångster under Xwayland. "
"Resursnamnet eller resursklassen för ett givet X11-fönster kan erhållas "
"genom att använda kommandot ”xprop WM_CLASS”. Stöd finns för att använda "
"jokertecknen ”*” och ”?” i värdena. Värden som startar med ”!” svartlistas, "
"vilket företräde över vitlistan, för att upphäva program i "
"standardsystemlistan. Standardsystemlistan innehåller följande program: "
"”@XWAYLAND_GRAB_DEFAULT_ACCESS_RULES@” Användare kan bryta en befintlig "
"fångst genom att använda den specifika tangentbordsgenvägen som definieras "
"av tangentbindningsnyckeln ”restore-shortcuts”."
#. TRANSLATORS: This string refers to a button that switches between #. TRANSLATORS: This string refers to a button that switches between
#. * different modes. #. * different modes.
#. #.
#: src/backends/meta-input-settings.c:2151 #: src/backends/meta-input-settings.c:2325
#, c-format #, c-format
msgid "Mode Switch (Group %d)" msgid "Mode Switch (Group %d)"
msgstr "Lägesväxel (grupp %d)" msgstr "Lägesväxel (grupp %d)"
@@ -508,37 +537,37 @@ msgstr "Lägesväxel (grupp %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets' #. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs. #. * mapping through the available outputs.
#. #.
#: src/backends/meta-input-settings.c:2174 #: src/backends/meta-input-settings.c:2348
msgid "Switch monitor" msgid "Switch monitor"
msgstr "Växla skärm" msgstr "Växla skärm"
#: src/backends/meta-input-settings.c:2176 #: src/backends/meta-input-settings.c:2350
msgid "Show on-screen help" msgid "Show on-screen help"
msgstr "Visa hjälp på skärmen" msgstr "Visa hjälp på skärmen"
#: src/backends/meta-monitor-manager.c:903 #: src/backends/meta-monitor-manager.c:900
msgid "Built-in display" msgid "Built-in display"
msgstr "Inbyggd display" msgstr "Inbyggd display"
#: src/backends/meta-monitor-manager.c:926 #: src/backends/meta-monitor-manager.c:923
msgid "Unknown" msgid "Unknown"
msgstr "Okänd" msgstr "Okänd"
#: src/backends/meta-monitor-manager.c:928 #: src/backends/meta-monitor-manager.c:925
msgid "Unknown Display" msgid "Unknown Display"
msgstr "Okänd display" msgstr "Okänd display"
#. TRANSLATORS: this is a monitor vendor name, followed by a #. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"' #. * size in inches, like 'Dell 15"'
#. #.
#: src/backends/meta-monitor-manager.c:936 #: src/backends/meta-monitor-manager.c:933
#, c-format #, c-format
msgid "%s %s" msgid "%s %s"
msgstr "%s %s" msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running; #. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit #. * we have no way to get it to exit
#: src/compositor/compositor.c:476 #: src/compositor/compositor.c:481
#, c-format #, c-format
msgid "" msgid ""
"Another compositing manager is already running on screen %i on display “%s”." "Another compositing manager is already running on screen %i on display “%s”."
@@ -553,42 +582,46 @@ msgstr "Ljudsignalhändelse"
msgid "Failed to open X Window System display “%s”\n" msgid "Failed to open X Window System display “%s”\n"
msgstr "Misslyckades med att öppna X Window System-displayen ”%s”\n" msgstr "Misslyckades med att öppna X Window System-displayen ”%s”\n"
#: src/core/main.c:189 #: src/core/main.c:190
msgid "Disable connection to session manager" msgid "Disable connection to session manager"
msgstr "Inaktivera anslutning till sessionshanteraren" msgstr "Inaktivera anslutning till sessionshanteraren"
#: src/core/main.c:195 #: src/core/main.c:196
msgid "Replace the running window manager" msgid "Replace the running window manager"
msgstr "Ersätt körande fönsterhanteraren" msgstr "Ersätt körande fönsterhanteraren"
#: src/core/main.c:201 #: src/core/main.c:202
msgid "Specify session management ID" msgid "Specify session management ID"
msgstr "Ange sessionshanteringsid" msgstr "Ange sessionshanteringsid"
#: src/core/main.c:206 #: src/core/main.c:207
msgid "X Display to use" msgid "X Display to use"
msgstr "X-display att använda" msgstr "X-display att använda"
#: src/core/main.c:212 #: src/core/main.c:213
msgid "Initialize session from savefile" msgid "Initialize session from savefile"
msgstr "Initiera session från sparandefil" msgstr "Initiera session från sparandefil"
#: src/core/main.c:218 #: src/core/main.c:219
msgid "Make X calls synchronous" msgid "Make X calls synchronous"
msgstr "Gör X-anrop synkrona" msgstr "Gör X-anrop synkrona"
#: src/core/main.c:225 #: src/core/main.c:226
msgid "Run as a wayland compositor" msgid "Run as a wayland compositor"
msgstr "Kör som en wayland-kompositionshanterare" msgstr "Kör som en wayland-kompositionshanterare"
#: src/core/main.c:231 #: src/core/main.c:232
msgid "Run as a nested compositor" msgid "Run as a nested compositor"
msgstr "Kör som en nästlad kompositionshanterare" msgstr "Kör som en nästlad kompositionshanterare"
#: src/core/main.c:239 #: src/core/main.c:240
msgid "Run as a full display server, rather than nested" msgid "Run as a full display server, rather than nested"
msgstr "Kör som en full display-tjänst, i stället för nästlad" msgstr "Kör som en full display-tjänst, i stället för nästlad"
#: src/core/main.c:246
msgid "Run with X11 backend"
msgstr "Kör med X11-gränssnitt"
#. Translators: %s is a window title #. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147 #: src/core/meta-close-dialog-default.c:147
#, c-format #, c-format
@@ -643,7 +676,7 @@ msgstr "Mutter-insticksmodul att använda"
msgid "Workspace %d" msgid "Workspace %d"
msgstr "Arbetsyta %d" msgstr "Arbetsyta %d"
#: src/core/screen.c:580 #: src/core/screen.c:583
#, c-format #, c-format
msgid "" msgid ""
"Display “%s” already has a window manager; try using the --replace option to " "Display “%s” already has a window manager; try using the --replace option to "
@@ -652,7 +685,7 @@ msgstr ""
"Display ”%s” har redan en fönsterhanterare; försök med flaggan --replace för " "Display ”%s” har redan en fönsterhanterare; försök med flaggan --replace för "
"att ersätta den aktuella fönsterhanteraren." "att ersätta den aktuella fönsterhanteraren."
#: src/core/screen.c:665 #: src/core/screen.c:668
#, c-format #, c-format
msgid "Screen %d on display “%s” is invalid\n" msgid "Screen %d on display “%s” is invalid\n"
msgstr "Skärm %d på display ”%s” är ogiltig\n" msgstr "Skärm %d på display ”%s” är ogiltig\n"
@@ -661,12 +694,12 @@ msgstr "Skärm %d på display ”%s” är ogiltig\n"
msgid "Mutter was compiled without support for verbose mode\n" msgid "Mutter was compiled without support for verbose mode\n"
msgstr "Mutter kompilerades utan stöd för utförligt läge\n" msgstr "Mutter kompilerades utan stöd för utförligt läge\n"
#: src/wayland/meta-wayland-tablet-pad.c:563 #: src/wayland/meta-wayland-tablet-pad.c:567
#, c-format #, c-format
msgid "Mode Switch: Mode %d" msgid "Mode Switch: Mode %d"
msgstr "Lägesväxel: Läge %d" msgstr "Lägesväxel: Läge %d"
#: src/x11/session.c:1815 #: src/x11/session.c:1818
msgid "" msgid ""
"These windows do not support “save current setup” and will have to be " "These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in." "restarted manually next time you log in."
@@ -678,3 +711,18 @@ msgstr ""
#, c-format #, c-format
msgid "%s (on %s)" msgid "%s (on %s)"
msgstr "%s (på %s)" msgstr "%s (på %s)"
#~ msgid "Move window one workspace to the left"
#~ msgstr "Flytta fönster en arbetsyta åt vänster"
#~ msgid "Move window one workspace to the right"
#~ msgstr "Flytta fönster en arbetsyta åt höger"
#~ msgid "Move to workspace left"
#~ msgstr "Flytta till arbetsyta till vänster"
#~ msgid "Move to workspace right"
#~ msgstr "Flytta till arbetsyta till höger"
#~ msgid "Toggle shaded state"
#~ msgstr "Växla upprullat tillstånd"

Some files were not shown because too many files have changed in this diff Show More