click_action_query_long_press() can potentially schedule more than
one timeout, since it doesn't clear any already-existing timeout.
Make sure to clear the long press timeout before scheduling a new
one.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1188
Like the click action, it makes sense to cancel the ongoing gesture
when the action is disabled. Do so by overriding our new friend,
ClutterActorMeta.set_enabled, and canceling the gesture when disabling
the action.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1188
ClutterClickAction, like other actions, can potentially be disabled
at any time (that is not during painting). When that happens with
ClutterClickAction, it must release all timeouts and disconnect from
the stage's 'capture-event'.
Override ClutterActorMeta.set_enabled and release the click action
when the action is being disabled.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1188
Various subclasses of ClutterActorMeta need to reacto to being
disabled. Right now, however, the only way to do that is by
overriding GObject's 'notify' vfunc, and doing a string comparison
against "enabled".
Add a new vfunc to ClutterActorMeta in order to replace this bad
practice.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1187
In the unlikely case we have multiple rectangles in our selection
(selection spanning several lines, or across LTR/RTL bounds), paint each
of those instead of setting a CoglPath-based clip/fill.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1126
With the introduction of "shallow" relayouts, we are now able to enter
allocation cycles not only at the stage but also deeper down the
hierarchy if we know an actors allocation isn't affected by its children
since the NO_LAYOUT flag is set.
Now that means when queuing relayouts it's possible that
`priv->needs_allocation` gets set to TRUE for some actors down the
hierarchy, but not for actors higher up in the hierarchy. An actor tree
where that happens could look like that:
stage -> container -> container2 (NO_LAYOUT) -> textActor
With that tree, if the "textActor" queues a relayout, "container2" will
be added to the relayout hashtable of the stage and the actors "stage"
and "container" will have `priv->needs_allocation` set to FALSE.
Now if another relayout on the stage actor is queued,
`clutter_stage_queue_actor_relayout()` currently removes all the other
hashtable entries in favour of the stage entry, (wrongly) assuming that
will allocate everything. It doesn't allocate everything because in the
example above "container" has `priv->needs_allocation` set to FALSE,
which makes clutter_actor_allocate() return early before allocating its
children, so in the end "container2" will never get a new allocation.
To fix this, stop flushing the relayout hashtable when queuing a
stage-relayout and still add new entries to the hashtable if a stage
relayout is already queued to make sure we still go through all the
previously queued "shallow" relayouts. That shouldn't hurt performance,
too, because as soon as an actor got allocated once, it doesn't need an
allocation anymore and should bail out in clutter_actor_allocate() as
long as it's absolute position didn't change.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2538https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1173
Disabling a click action after a button-press but before a
button-release is captured makes ClutterClickAction connect to
captured-event and never disconnect.
This change fixes it by making sure the captured-event is only
processed if the action is still enabled, otherwise releasing
the action (reset state) and propagating the event.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1170
Nothing should ever disable an actor modifier (e.g. effect) during the
paint sequence, nor should any actor be set or unset on it. If this
would happen, log warnings so that it can be tracked down.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1166
When selecting the pick regions for an actor we were not considering
whether the actor was allocated and that was causing issues where the
preferred width/height of the actor was used when deciding whether
the actor should be considered as a pick target.
Check if the actor has a valid allocation, in addition to being mapped
and being in pick mode, in clutter_actor_should_pick_paint().
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1169
The input method can assign a negative value to
clutter_input_method_delete_surrounding() to move the cursor to the left.
But Wayland protocol accepts positive values in delete_surrounding() and
GTK converts the values to the negative ones in
text_input_delete_surrounding_text_apply().
https://gitlab.gnome.org/GNOME/mutter/issues/539
Fix a regression that got introduced with
c483b52d24 where we started passing the
redraw_clip to paint_stage() instead of creating a temporary view_region
for unclipped redraws: In case we detect an invalid buffer age, we fall
back to doing an unclipped redraw after we passed the first check
setting up may_use_clipped_redraw. That means we didn't reset the
redraw_clip to the view_rect, and we're now going to redraw the stage
using the original redraw clip even though we're swapping the full
framebuffer without damage.
To fix that, check for the buffer age before setting up the
fb_clip_region and the redraw_clip and set may_use_clipped_redraw to
FALSE if the buffer age is invalid, too. This ensures the redraw_clip is
always going to be correctly set to the view rect when we want to force
a full redraw.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/1128
When calculating the resource scale of a clone source, we might end up
in situations where we fail to do so, even though we're in a paint. A
real world example when this may happen if this happens:
* A client creates a toplevel window
* A client creates a modal dialog for said toplevel window
* Said client commits a buffer to the modal before the toplevel
If GNOME Shell is in overview mode, the window group is hidden, and the
toplevel window actor is hidden. When the clone tries to paint, it fails
to calculate the resource scale, as the parent of the parent (window
group) is not currently mapped. It would have succeeded if only the
clone source was unmapped, as it deals with the unmapped actor painting
by setting intermediate state while painting, but this does not work
when the *parent* of the source is unmapped as well.
Fix this by inheriting the unmapped clone paint even when calculating
the resource scale.
This also adds a test case that mimics the sequence of events otherwise
triggered by a client. We can't add a Wayland client to test this, where
we actually crash is in the offscreen redirect effect used by the window
dimming feature in GNOME Shell.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/808https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1147
This is so that cogl-trace.h can start using things from cogl-macros.h,
and so that it doesn't leak cogl-config.h into the world, while exposing
it to e.g. gnome-shell so that it can make use of it as well. There is
no practical reason why we shouldn't just include cogl-trace.h via
cogl.h as we do with everything else.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1059
This adds a new frameclock tracing mark for a single cycle of the frame
clock. Doing so allows Sysprof to potentially do more with the information
that happens during the frameclock. For example, we can now find
allocations that happen while the frame clock is advancing.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1088
offset_scale_and_clamp_region() creates a new region resulting in
view_damage which at this point is the only thing left pointing to what
originally was fb_damage getting overwritten and being leaked.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1089
The stage window handled the redraw clip in a global manner; this would
interfere if we want to paint views individually as it'd mean
intersecting views (i.e. mirrored monitors) would loose the redraw clip
once the first view was painted. It also is awkward to have a global
state for something that is built up before redrawing, and only really
valid during paint, due to buffer damage history.
This commits removes all redraw clip management from the stage window,
moving it all into the stage views. When a redraw clip is added to the
stage, every affected view will get the same redraw clip added to it,
and eventually when painted, the stage window (ClutterStageCogl) will
retrieve the redraw clip for each view as it repaints them.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1042
Instead of users fetching it via `clutter_stage_get_redraw_clip()`, pass
it via the paint context. This is helpful as it is only valid during a
paint, making it more obvious that it needs to be handled differently
when there is no redraw clip (i.e. we're painting off-screen).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1042
Add a helper that scales and clamps a region, aimed to be used when
transforming between framebuffer coordinate space and view coordinate
spaces.
This helps readability by moving out the verbose for loops that deals
with the individual rects of a region to the helper, making the logic
where it's used much simpler.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1042
The 'have_clip' variable has repeatedly confused me to meaning that
there is a clip. What it actually means is that the effective clip
covers the whole view; the 'redraw_clip == NULL' meaning full redraw is
an important implementation detail for the context, and makes the
intention of the variable unclear; especially since we will after a
couple of blocks will *always* have a clip, just that it covers the
whole view.
Rename the variable to 'is_full_redraw' and negate the meaning, aiming
to make things a lot more clear.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1042
When calculating the fallback framebuffer clip region, which should be
the region in framebuffer coordinates, we didn't scale the view layout
with the view framebuffer scale, meaning for any other scale than 1,
we'd draw a too small region of the view. Fix this by just using the
size of the framebuffer directly, avoiding any scale dependent
calculation all together.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1042
We'll expect a swap event if any of the view paints resulted in a swap;
make the logic dealing with this clearer by making changing the less
vilible '|| swap_event' postfix with a up front '|=' operator.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1042
Prior to this commit the stage was drawn separately for each logical
monitor. This allowed to draw different parts of the stage with
different transformations, e.g. with a different viewport to implement
HiDPI support.
Go even further and have one view per CRTC. This causes the stage to
e.g. draw two mirrored monitors twice, instead of using the same
framebuffer on both. This enables us to do two things: one is to support
tiled monitors and monitor mirroring using the EGLStreams backend; the
other is that it'll enable us to tie rendering directly to the CRTC it
will render for. It is also a requirement for rendering being affected
by CRTC state, such as gamma.
It'll be possible to still inhibit re-drawing of the same content
twice, but it should be implemented differently, so that it will still
be possible to implement features requiring the CRTC split.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1042
This only needs to be initialized once but is in the hot path of creating
new paint nodes (for which we create many). Instead, do this as part of
the clutter_init() workflow to keep it out of the hot path.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1087
When calculating regions, a lot of temporary allocations are created. For
the array of rects (which is often a short number of them) we can use
stack allocations up to 1 page (256 cairo_rectangle_int_t). For building
a region of rectangles, cairo and pixman are much faster if you have all
of the rectangles up front or else it mallocs quite a bit of temporary
memory.
If we re-use the cairo_rectangle_int_t array we've already allocated (and
preferably on the stack), we can delay the creation of regions until after
the tight loop.
Additionally, it requires fewer allocations to union two cairo_region_t
than to incrementally union the rectangles into the region.
Before (percentages are of total number of allocations)
TOTAL FUNCTION
[ 100.00%] [Everything]
[ 100.00%] [gnome-shell --wayland --display-server]
[ 99.67%] _start
[ 99.67%] __libc_start_main
[ 99.67%] main
[ 98.60%] meta_run
[ 96.90%] g_main_loop_run
[ 96.90%] g_main_context_iterate.isra.0
[ 96.90%] g_main_context_dispatch
[ 90.27%] clutter_clock_dispatch
[ 86.54%] _clutter_stage_do_update
[ 85.00%] clutter_stage_cogl_redraw
[ 84.98%] clutter_stage_cogl_redraw_view
[ 81.09%] cairo_region_union_rectangle
After (overhead has much dropped)
TOTAL FUNCTION
[ 100.00%] [Everything]
[ 99.80%] [gnome-shell --wayland --display-server]
[ 99.48%] _start
[ 99.48%] __libc_start_main
[ 99.48%] main
[ 92.37%] meta_run
[ 81.49%] g_main_loop_run
[ 81.49%] g_main_context_iterate.isra.0
[ 81.43%] g_main_context_dispatch
[ 39.40%] clutter_clock_dispatch
[ 26.93%] _clutter_stage_do_update
[ 25.80%] clutter_stage_cogl_redraw
[ 25.60%] clutter_stage_cogl_redraw_view
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1071
g_signal_emit_by_name() is used to emit signals on ClutterContainer when
actors are removed or added. It happens to do various interface lookups
which are a bit unneccessary and can allocate memory.
Simply using emission wrappers makes all of that go away.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1083
Add API to ClutterSeat that allows inhibiting the unsetting of the
pointer focus surface. This can be useful for drawing custom cursor
textures like the magnifier of gnome-shell does.
In the future this API should also control unsetting of Clutters
focus-actor, not just the focus surface, that's not really needed right
now since we never unset the focus-actor anyway.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1077
Which offscreens actor rendering only in cases where it hasn't changed for
2 frames or more. This avoids the performance penalty of offscreening an
actor whose content is trying to animate at full frame rate. It will
switch automatically.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1069
If the transform matrix is an identity, then positioning wont change and
we can avoid creating the transform node altogether. This is based on
a similar find in GTK today while reducing temporary allocations.
This cuts the number of transforms created in clutter_actor_paint() by
about half under light testing of GNOME Shell from 6.8% to 2.4% of
allocations.
Before:
ALLOCATED TOTAL FUNCTION
[ 20.4 MiB] [ 21.20%] clutter_actor_paint
[ 11.0 MiB] [ 11.45%] clutter_paint_node_paint
[ 6.6 MiB] [ 6.84%] clutter_transform_node_new
[ 2.5 MiB] [ 2.61%] clutter_actor_node_new
After:
ALLOCATED TOTAL FUNCTION
[ 33.4 MiB] [ 24.12%] clutter_actor_paint
[ 26.2 MiB] [ 18.91%] clutter_paint_node_paint
[ 3.4 MiB] [ 2.43%] clutter_actor_node_new
[ 3.3 MiB] [ 2.41%] clutter_transform_node_new
Allocation amounts will have differed due to different amounts of running
time, but the % of allocations has now dropped below
clutter_actor_node_new() which should be expected.
https://gitlab.gnome.org/GNOME/mutter/issues/1056
And the corresponding getter. This property returns FALSE by default
and must be overridden by subclasses. This will allow gnome-shell to
hook up specific behavior that should not happen on mouse+keyboard
setups.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1044
If an actor sets flag `CLUTTER_ACTOR_NO_LAYOUT` then that means it
is (or should be) unaffected by `queue_relayout` calls in its children.
So we can avoid propagating `queue_relayout` all the way up to the stage
and avoid a full stage relayout each time.
But those children whose parent has `CLUTTER_ACTOR_NO_LAYOUT` still need
to be allocated at some point. So we do it at the same point where it
happened before. Only we now queue a *shallow* relayout so the `allocate`
run on the next frame doesn't need to descend the whole actor tree anymore.
Only a subtree and hopefully very small.
For free-floating and top-level actors this provides a measurable
performance benefit. According to Google Profiler, calls to
`_clutter_stage_maybe_relayout` are now so cheap that they no longer show
up in performance profiles.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/575
The private function `_clutter_input_device_update()` is not currently
exported.
This function calls `_clutter_input_device_set_actor()` which updates
the `ClutterActor` under the pointer, so making that function available
outside of Clutter will allow to make sure the pointer device actor is
updated prior to do picking.
Also, now that the functions is exported to the upper layers, drop the
underscore suffix from the function name.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1026
Right now the CONTENT_SIZE request mode for a ClutterActor is only
respected by `clutter_actor_get_preferred_size()`, but not by
`get_preferred_width()` and `get_preferred_height()`. Those simply try
to ask the layout manager and will return [0, 0] for actors without
children. So be consistent and also return the content size in those two
functions.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1019
As recommended by the docs for `g_settings_schema_source_get_default`:
> The returned source may actually consist of multiple schema sources
> from different directories, depending on which directories were given
> in XDG_DATA_DIRS and GSETTINGS_SCHEMA_DIR. For this reason, all lookups
> performed against the default source should probably be done recursively.
Now it's actually found and works again, including subpixel font smoothing.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1447https://gitlab.gnome.org/GNOME/mutter/merge_requests/1017
ClutterActors width and height can be reset to automatically use the
preferred (calculated) value by setting the width or height to -1, so
far this only works by setting it using `clutter_actor_set_width()` or
`clutter_actor_set_height()`, make sure it can also be done using the
"width" and "height" GObject properties.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1018
Some ClutterOffscreenEffect subclasses, such as ClutterBrightnessContrastEffect,
early-return FALSE in pre-paint before chaining up. It's an important optimization
that avoids creating or updating the offscreen framebuffer.
However, if an offscreen framebuffer already exists by the time pre-paint fails,
it will be used *without* repaint the actor over it. That causes an old picture
of the actor to be displayed.
Fix that by always clearing the offscreen framebuffer when pre-paint fails.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/810https://gitlab.gnome.org/GNOME/mutter/merge_requests/992
When changing the 'enabled' property and disabling the offscreen effect,
it doesn't make sense to preserve the offscreen framebuffer. It's not
drawing, after all.
Furthermore, because ClutterOffscreenEffect only checks if the offscreen
framebuffer exists to decide whether or not to redraw, keeping the fbo
alive is a waste of resources.
Clear the offscreen framebuffer when the effect is disabled or enabled.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/810https://gitlab.gnome.org/GNOME/mutter/merge_requests/992
FLT_MIN is the smallest *positive* number above 0 that can be
represented as floating point number. If this is used to initialize the
maximum x/y coordinates of a rectangle, this will always be used if all
x/y coordinates of the rectangle are negative. This means that picking
at 0,0 will always be a hit for such rectangles.
Since mutter creates such a window for server side decorations on X11,
this window will always be picked at 0,0 preventing clicking/hovering
the activities button in gnome-shell at that coordinate.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/893
When rendering on-stage, it might be necessary to push offscreen
framebuffers to the paint context by external consumers, such as
GNOME Shell effects.
Expose clutter_paint_context_push|pop_framebuffer().
https://gitlab.gnome.org/GNOME/mutter/merge_requests/955
They have been deprecated for a long time, and all their uses in clutter
and mutter has been removed. This also removes some no longer needed
legacy state tracking, as they were only ever excercised in certain
circumstances when there was sources (pipelines or materials) on the now
removed source stack.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
Stop using API that uses the implicit Cogl framebuffer stack, (e.g.
cogl_push_matrix()) and replace usage by the corresponding API taking an
explicit framebuffer (e.g. cogl_framebuffer_push_matrix()).
For offscreens etc, the offscreen framebuffer is still pushed to and
popped from the Cogl framebuffer stack, so that paint nodes still draw
to the right framebuffer.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
While we still push and pop to the Cogl framebuffer stack, as so is
still needed to render the actors correctly, don't use the API using the
implicit framebuffer stack ourself in the offscreen effect code.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
clutter_paint_node_get_framebuffer() fell back on
cogl_get_draw_framebuffer() when the root node didn't have a custom
get_framebuffer vfunc. As this relies on deprecated implicit Cogl stack
API, it needs to go away, so handle this in the caller that knows more
about the context.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
Instead of using the intermediate stage state "active framebuffer" to
find the framebuffer a paint eventually targets, use the "base
framebuffer" of the paint context, as this more correctly corresponds to
the end point of a paint. It also means we can then later remove this
intermediate state from the stage.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
Instead of pushing and popping the Cogl framebuffer stack, use the
framebuffer passed around using the pick context. This removes usage of
the deprecated framebuffer stack when picking.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
Rendering off stage we never cull, and previously this was checked by
comparing the "active framebuffer" of the stage, to the current
framebuffer in the cogl stack. Replace this by checking whether the
current paint context is currently drawing on stage or not.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
Just as with painting, add a pick context that carries pick related
temporary state when doing actor picking. It is currently unused, and
will at least at first still carry around a framebuffer to deal track
view transforms etc.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
When painting, actors rely on semi global state tracked by the state to
get various things needed for painting, such as the current draw
framebuffer. Having state hidden in such ways can be very deceiving as
it's hard to follow changes spread out, and adding more and more state
that should be tracked during a paint gets annoying as they will not
change in isolation but one by one in their own places. To do this
better, introduce a paint context that is passed along in paint calls
that contains the necessary state needed during painting.
The paint context implements a framebuffer stack just as Cogl works,
which is currently needed for offscreen rendering used by clutter.
The same context is passed around for paint nodes, contents and effects
as well.
In this commit, the context is only introduced, but not used. It aims to
replace the Cogl framebuffer stack, and will allow actors to know what
view it is currently painted on.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
We do check the clip area as an optimization to know which input devices
might need updating state after a relayout (Assuming that if a device is
under a non-painted area, it's actor beneath didn't change).
Use the clip region for this, and drop the last usage of the clip region
bounds.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/867
This commit was split out from `cleanup: Use g_clear_signal_handler()
where possible` as it fixes an actual signal leak and should therefore
get backported to stable releases.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/940
This is inspired by 98892391d7 where the usage of
`g_signal_handler_disconnect()` without resetting the corresponding
handler id later resulted in a bug. Using `g_clear_signal_handler()`
makes sure we avoid similar bugs and is almost always the better
alternative. We use it for new code, let's clean up the old code to
also use it.
A further benefit is that it can get called even if the passed id is
0, allowing us to remove a lot of now unnessecary checks, and the fact
that `g_clear_signal_handler()` checks for the right type size, forcing us
to clean up all places where we used `guint` instead of `gulong`.
No functional changes intended here and all changes should be trivial,
thus bundled in one big commit.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/940
CallyTexture is an accessibility object associated with ClutterTexture.
ClutterTexture is going away, so prepare by first removing the
accessibility object that would be constructed for it.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/932
clutter_event_get_scroll_finish_flags() should return a ClutterScrollFinishFlags
but due to what looks like a bad copy/paste it instead returns a
ClutterScrollSource on asserts.
The definitions of the enums are these:
typedef enum
{
CLUTTER_SCROLL_SOURCE_UNKNOWN,
CLUTTER_SCROLL_SOURCE_WHEEL,
CLUTTER_SCROLL_SOURCE_FINGER,
CLUTTER_SCROLL_SOURCE_CONTINUOUS
} ClutterScrollSource;
typedef enum
{
CLUTTER_SCROLL_FINISHED_NONE = 0,
CLUTTER_SCROLL_FINISHED_HORIZONTAL = 1 << 0,
CLUTTER_SCROLL_FINISHED_VERTICAL = 1 << 1
} ClutterScrollFinishFlags;
The asserts would only return CLUTTER_SCROLL_SOURCE_UNKNOWN. This
is equal to CLUTTER_SCROLL_FINISHED_NONE which this patch uses
instead. Thus no functional change is intended. This only fixes a
compile warning.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/931
Clutter has a draw debug mode that allows for painting
paint volumes. Right now, this debug mode uses the old
immediate paint mode.
Switch the painting of paint volumes to use paint nodes,
and sneak a few minor style cleanups.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/890
Now that we unconditionally use ClutterActorNode to
paint ClutterActors, move the PAINT private flag to
the ClutterActorNode. This way, we can run the paint
on the actor anywhere inside the paint tree.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/890
When setting the root node as child of a clip or transform node, we add a
new reference to it, without removing the one that we've previously added
when getting it from the actor node (and that won't ever be unset by the
auto-pointer since the root_node is re-associated).
So, once we add the root node as child and re-define it, unref it.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/908
Previously, we would use a single offscreen framebuffer for both
transformations and when a shadow framebuffer should be used, but that
can be dreadfully slow when using software rendering with a discrete GPU
due to bandwidth limitations.
Keep the offscreen framebuffer for transformations only and add another
intermediate shadow framebuffer used as a copy of the onscreen
framebuffer.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/877
A compositor is notably opaque (usually has nothing to be painted on!).
gnome-shell sets this hint, but there's no reason why we wouldn't want
it by default.
Also, the color buffer being cleared messes with stencil clips, as the
clear operation by definition ignores the stencil buffer. We want to
use these more extensively in the future, so just drop this API.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/911
This reverts commit 4918893326.
This commit prevented cogl_stage_cogl_redraw_view() from skipping
swap buffers entirely if the invalidation region ended up empty.
This meant we were actually swapping buffers when we didn't need to.
The source of the glitches was fixed more properly, so this just adds
extra work.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/898
This way, we can simply pop up the Looking Glass and run:
>>> Meta.add_clutter_debug_flags(Clutter.DebugFlag.PICK, 0, 0)
And measure specific actions or events on GNOME Shell.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/862
As we do not prevent the SwapBuffers call from happening, those also
do count. Results in clip area calculations to be right for monitors
that previously did not get invalidated.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/888
Make ClutterActor paint using ClutterTransformNode, ClutterClip
node, and ClutterActorNode. Essencially, the actor node is a
replacement for clutter_actor_continue_paint().
An interesting aspect of this commit is that the order of the
operations is reversed to be preserved.
Before being able to remove the dummy node hack, we'll need to
make ClutterEffects compatible with paint nodes first -- and
naturally, that's enough content for its own merge request.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/872
ClutterActorNode is a paint node that runs the 'paint'
function of an actor. It is a useful helper node to be
used during the transition to paint nodes.
The role of ClutterActorNode will change over time. For
now, it is just a call to clutter_actor_continue_paint(),
which also paints the effects. When ClutterEffect is
ported to paint nodes, ClutterActorNode will morph to
only notify the actor about the painting, and will become
a private node to Clutter.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/872
Previously picking was done on an int (x,y) to address a particular pixel.
While `int` was the minimum precision required, it was also an unnecessary
type conversion.
The callers (input events mainly) all provide float coordinates and the
internal picking calculations also have always used floats. So it was
inconsistent and unnecessary to drop to integer precision in between those.
ABI break: This changes the parameter types for public function
`clutter_stage_get_actor_at_pos`, but its documentation is already
sufficiently vague to not need changing.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/844
This is an extremely straightforward and minimalistic port of
CoglVector APIs to the corresponding Graphene APIs.
Make ClutterPlane use graphene_vec3_t internally too, for the
simplest purpose of keeping the patch focused.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/458
Mutter requires Clutter, which requires Cogl. That means
Clutter requires all Cogl dependencies, and Mutter requires
all Clutter dependencies as well.
However, currently, Clutter does not pull in its dependencies,
which means we need to link against Cogl manually.
Add Clutter dependencies to declare_dependency() so that the
graphene dependency only needs to be declared once, for Cogl,
and pulled together.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/458
This is a deprecated property that is not used anywhere
in the codebase. Not by GNOME Shell. Because it uses the
deprecated ClutterGeometry type, it's a good target for
cleaning up, given that ClutterGeometry will be dropped
later on.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/458
Fog is explicitly deprecated in favour of CoglSnippet API,
and in nowhere we are using this deprecated feature, which
means we can simply drop it without any sort of replacement.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/458
When clutter actors with key focus are destroyed we emit ::key-focus-out on
them just after their destruction. This is against our assumption that no
signal should be emitted after "::destroy" (see GNOME/mutter!769 [1]), and
in fact could cause the shell to do actions that we won't ever stop on
destroy callback.
To avoid this to happen, use a private function to set its key-state (so we
can avoid looking for the stage) and emit ::key-focus-in/out events and use
this value in both clutter_actor_has_key_focus(),
clutter_actor_grab_key_focus() and on unmap and destruction to unset the
stage key focus before we emit the ::destroy signal.
As result of this, we can now avoid to unset the key focus on actor
destruction in the stage.
[1] https://gitlab.gnome.org/GNOME/mutter/merge_requests/769
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1704
Clutter had support for internal children in its early revisions, but they
were deprecated for long time (commit f41061b8df, more than 7 years ago) and
no one is using them in both clutter and in gnome-shell.
So remove any alternative code path that uses internal children.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/816
This is for all intents and purposes the same as
`cogl_object_ref/unref`, but still refers to handles rather than
objects (while we're trying to get rid of the former) so it's a bit of
unnecessary redundant API.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/451
The default value of the ClutterShaderEffect:shader-type
property is CLUTTER_FRAGMENT_SHADER. However, because the
struct field is not actually initialized to it, it ends
up assuming the value 0, which is CLUTTER_VERTEX_SHADER.
Properly initialize ClutterShaderEffect's shader_type to
CLUTTER_FRAGMENT_SHADER.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/846
ClutterActor took a reference in its transition 'stopped' handler,
aiming to keep the transition alive during signal emission even if it
was removed during. This is, however, already taken care of by
ClutterTimeline, by always taking a reference during its 'stopped'
signal emission, so no need to add another one.
This also has the bonus of making reference ownership simpler, as well
as avoidance of double free if an actor was destroyed before a
transition has finished.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/828
Implicit transitions had a referenced taken while emitting the
completion signals, but said reference would only be released if it was
had remove-on-complete set to TRUE.
Change this to instead remove the 'is_implicit' state and mark all
implicit transitions as remove-on-complete. This fixes a
ClutterPropertyTransition leak in gnome-shell triggered by e.g. showing
/ hiding menus.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1740https://gitlab.gnome.org/GNOME/mutter/merge_requests/828
The final version of the function was changed to allow points that are
touching the edge of a quadrilateral to be counted as "inside". Update
the function documentation to refect this.
Also clarify that the function is written in such a way that it is
agnostic to clockwise or anticlockwise vertex ordering.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/783
In `clutter_stage_view_blit_offscreen()`, the given clipping rectangle
is in “view” coordinates whereas we intend to copy the whole actual
framebuffer, meaning that we cannot use the clipping rectangle.
Use the actual framebuffer size, starting at (0, 0) instead.
That fixes the issue with partial repainting with shadow framebuffer
when fractional scaling is enabled.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/820
Clutter actors might emit property changes in dispose, while unparenting.
However we assume that the ::destroy signal is the last one we emit for an
actor, and that starting from this moment the object is not valid anymore,
and so we don't expect any signal emission from it.
To avoid this, freeze the object notifications on an actor during its
disposition, just before the ::destroy signal emission.
Update the actor-destroy test to verify this behavior.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/769
Clutter actors unset their parent on dispose, after emitting the ::destroy
signal, however this could cause ::parent-set signal emission. Since we
assume that after the destruction has been completed the actor isn't valid
anymore, and that during the destroy phase we do all the signal / source
disconnections, this might create unwanted behaviors, as in the signal
callbacks we always assume that the actor isn't in disposed yet.
To avoid this, don't emit ::parent-set signal if the actor is being
destroyed.
Update the actor-destroy test to verify this behavior.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/769
If there is no transformation, use `cogl_blit_framebuffer()` as a
shortcut in `clutter_stage_view_blit_offscreen()`, that dramatically
improves performance when using a shadow framebuffer.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/809
Delayed clutter timelines might be removed while they are still in the
process of being executed, but if they are not playing yet their delay
timeout won't be stopped, causing them to be executed anyway, leading to a
potential crash.
In fact if something else keeps a reference on the timelines (i.e. gjs), the
dispose vfunc delay cancellation won't take effect, causing the timelines to
be started and added to the master clock.
To avoid this, expose clutter_timeline_cancel_delay() function and call it
if a timeline is not playing but has a delay set.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/815https://gitlab.gnome.org/GNOME/mutter/merge_requests/805
If a timeline is delayed and we request to stop or pause it, we are emitting
the "::paused" signal on it, however this has never been started, and so
nothing has really be paused.
So, just try to cancel the delay on pause and return if not playing.
No code in mutter or gnome-shell is affected by this, so it is safe to
change.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/805
Clutter stage used to compute the initial projection using a fixed z
translation which wasn't matching the one we computed in
calculate_z_translation().
This caused to have a wrong initial projection on startup which was then
correctly recomputed only at the first paint.
However, since this calculation doesn't depend on view, but only on viewport
size, perspective's fovy and z_near we can safely do this at startup and
only when any of those parameters change.
Then we can move the computation out _clutter_stage_maybe_setup_viewport()
since the cogl framebuffer viewport sizes aren't affecting this.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1639https://gitlab.gnome.org/GNOME/mutter/merge_requests/803
When suspending, the devices are removed and the virtual device
associated with the corresponding core pointer is disposed.
Add the pointer accessibility virtual device to the core pointer
on resume to restore pointer accessibility on resume if enabled.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/761
Currently, Clutter does picking by drawing with Cogl and reading
the pixel that's beneath the given point. Since Cogl has a journal
that records drawing operations, and has optimizations to read a
single pixel from a list of rectangle, it would be expected that
we would hit this fast path and not flush the journal while picking.
However, that's not the case: dithering, clipping with scissors, etc,
can all flush the journal, issuing commands to the GPU and making
picking slow. On NVidia-based systems, this glReadPixels() call is
extremely costly.
Introduce geometric picking, and avoid using the Cogl journal entirely.
Do this by introducing a stack of actors in ClutterStage. This stack
is cached, but for now, don't use the cache as much as possible.
The picking routines are still tied to painting.
When projecting the actor vertexes, do it manually and take the modelview
matrix of the framebuffer into account as well.
CPU usage on an Intel i7-7700, tested with two different GPUs/drivers:
| | Intel | Nvidia |
| ------: | --------: | -----: |
| Moving the mouse: |
| Before | 10% | 10% |
| After | 6% | 6% |
| Moving a window: |
| Before | 23% | 81% |
| After | 19% | 40% |
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/154,
https://gitlab.gnome.org/GNOME/mutter/issues/691
Helps significantly with: https://gitlab.gnome.org/GNOME/mutter/issues/283,
https://gitlab.gnome.org/GNOME/mutter/issues/590,
https://gitlab.gnome.org/GNOME/mutter/issues/700
v2: Fix code style issues
Simplify quadrilateral checks
Remove the 0.5f hack
Differentiate axis-aligned rectangles
https://gitlab.gnome.org/GNOME/mutter/merge_requests/189
Add a function to check whether a point is inside a quadrilateral
by checking the cross product of vectors with the quadrilateral
points, and the point being checked.
If the passed quadrilateral is zero-sized, no point is ever reported
to be inside it.
This will be used by the next commit when comparing the transformed
actor vertices.
[feaneron: add a commit message and remove unecessary code]
https://gitlab.gnome.org/GNOME/mutter/merge_requests/189
This reverts commit f57ce7254d.
It causes crashes, https://gitlab.gnome.org/GNOME/mutter/issues/735, and
changes various expectations relied upon by the renderer code, and being
close to release, it's safer to revert now and reconsider how to remove
the pending swap counter at a later point.
Add a boolean parameter to the signal to inform the handler whether the
timeout completed successfully or not. This allows the shell to
gracefully end the pie timer animation and show a success animation when
the click happens.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/745
When a dwell click causes the pointer to move to another surface, a
synthetic event is generated which triggers another dwell click.
Make sure we ignore those to avoid dwell clicking twice in a raw.
Suggested-by: Carlos Garnacho <carlosg@gnome.org>
https://gitlab.gnome.org/GNOME/mutter/merge_requests/747
Restarting the dwell click immediately would result in a contant
animation showing.
Start dwell detection in its own timeout handler, which has the nice
effect of not constantly showing a dwell animation and also making sure
that the dwell click timeout is started when pointer movement stops.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/747
Sometimes the dwell timeout doesn't start again after quickly moving the
pointer. That happens if `should_stop_dwell` returns TRUE for the last
motion event we receive: It will stop the current timeout, but not start
a new one until we receive another event where the moved distance is
smaller than the threshold.
To fix this, always call `should_start_dwell` and `start_dwell_timeout`
instead of using an else-block, this makes sure we start a new dwell
timeout still during the same motion event that stopped the old one.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/746
And add the necessary glue so those initialize a X11 clutter backend.
This should get Clutter tests that are dependent on windowing to work
again, thus they were enabled back again.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/672
The end goal is to have all clutter backend code in src/backends. Input
is the larger chunk of it, which is now part of our specific
MutterClutterBackendNative, this extends to device manager, input devices,
tools and keymap.
This was supposed to be nice and incremental, but there's no sane way
to cut this through. As a result of the refactor, a number of private
Clutter functions are now exported for external backends to be possible.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/672
The end goal is to have all clutter backend code in src/backends. Input
is the larger chunk of it, which is now part of our specific
MutterClutterBackendX11, this extends to device manager, input devices,
tools and keymap.
This was supposed to be nice and incremental, but there's no sane way
to cut this through. As a result of the refactor, a number of private
Clutter functions are now exported for external backends to be possible.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/672
Mutter needs to know which framebuffer the paint nodes will be
drawn into, and using cogl_get_draw_framebuffer() directly is
not an option since ClutterRootNode only pushes the draw fb
at draw time.
Expose clutter_paint_node_get_framebuffer().
https://gitlab.gnome.org/GNOME/mutter/merge_requests/409
Incompressible events already pass through unmodified, so queuing them
just wasted time and memory.
We would however like to keep the ordering of events so we can only
apply this optimization if the queue is empty.
This reduces the input latency of incompressible events like touchpad
scrolling or drawing tablets by up to one frame. It also means the same
series of events now arrives at the client more smoothly and not in
bursts.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/711
Until now we would:
1. Enqueue modifier key event on the stage.
2. Update device modifier state.
3. Dequeue and process modifier key event with NEW device modifier state.
But if we consider optimizing out the queuing in some cases then there
will become a problem:
1. Process modifier key event with OLD device modifier state.
2. Update device modifier state.
To correct the above we now do:
1. Update device modifier state.
2. Queue/process modifier key event with NEW device modifier state.
It appears commit dd940a71 which introduced the old behaviour was correct
in the need to update the device modifier state, but is at least no longer
correct (if it ever was) that it should be done after queuing the event.
If queuing is working, as it is right now, then it makes no difference
whether the device modifier state is updated before or after. Because both
cases will come before the dequeing and processing.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/711
Thanks to the now removed global/context grabs, we can move pointer and
keyboard grabs back home to where they belong.
While at it, also add handling of CLUTTER_TABLET_DEVICE devices to
`on_grab_actor_destroy` and `clutter_input_device_get_grabbed_actor`.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/536
If possible, GLib will try to use the va_marshaller to pass the signal
arguments, rather than unboxing into and out of a `GValue`. This is much
more performant and especially good for often-thrown signals.
The original bug even mentions Clutter performance issues as a drive to
implement the va_marshaller in GLib (see
https://bugzilla.gnome.org/show_bug.cgi?id=661140).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/700
Some of the marshallers we generate in `clutter-marshal.list` are also
available in GLib, so we don't need to generate them ourselves. Even
more, by passing NULL to `g_signal_new` in these cases will actually
internally optimize this even more by also setting the valist
marshaller, which is a little bit faster than the regular marshalling
using `GValue` and libffi.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/700
`g_object_notify()` actually takes a global lock to look up the property
by its name, which means there is a performance hit (albeit tiny) every
time this function is called. For this reason, always try to use
`g_object_notify_by_pspec()` instead.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/703
Since commit 0eab73dc, actors are only allocated when they are actually
visible. While this generally works well, it breaks - because of *course*
it does - ClutterClones when the clone source (or any of its ancestors)
is hidden.
Force an allocation in that case to allow the clone's paint to work as
intended.
https://gitlab.gnome.org/GNOME/mutter/issues/683
The type has been deprecated, so stop using it. The easiest replacement
would be to add our own struct, but considering that separate name/value
arrays are easier to free (g_auto!) and we already do the split in one
place, go that route.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/689
Glib stopped providing any fallback implementations on systems without
memmove() all the way back in 2013. Since then, the symbol is a simple
macro around memmove(); use that function directly now that glib added
a deprecation warning.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/689
Currently nothing in the clutter machinery prevents hidden portions
of the actor tree from calling queue_relayout() (and having it fully
honored).
But that allocation should not be necessary till the actor is shown,
and one of the things we do on show() is queueing a relayout/redraw
after flagging the actor as visible.
We can simply defer clutter_actor_allocate() calls till that show()
call, and leave the needs_allocate and other flags set so we ensure
the allocation is properly set then.
This should cut down some needless operations when invisible portions
of the actor tree change indirectly due to user interaction, or due
to background activity.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/677
Clutter has two motion event toggles: one in the global context, and
one per stage. The global one is deprecated, and currently unused.
Remove the global motion event handling.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/666
The “togglekeys” setting is to emit a sounds whenever the state of one
of the modifiers keys (CAPS lock, NUM Lock, SCROLL lock) is changed, it
has nothing to do with the rest of the accessibility settings.
Therefore, there is no need to reset the various timers used by
accessibility whenever the “togglekeys” setting is changed.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/614
ClutterStage:after-paint now does not guarantee a valid
implicit framebuffer pushed to the stack. Instead, use
the new 'paint-view' signal, that is emitted at a point
in the drawing routine where a framebuffer is pushed.
In addition to that, stop using the implicit framebuffer
API and port the actor-shader-effect test to read from
the view's framebuffer directly.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/623
Now that ClutterStageView is embraced as part of the public
set of Clutter classes, is it possible to give consumers
of this API more information and control over the drawing
routines of ClutterStage.
Introduce ClutterStage:paint-view, a signal that is emitted
for painting a specific view. It's defined as a RUN_LAST
signal to give anyone connecting to it the ability to run
before the view is actually painted, or after (using the
G_CONNECT_AFTER flag, or g_signal_connect_after).
This signal has a corresponding class handler, which allows
Mutter to have much finer control over the painting routines.
In fact, this will allow us to implement a "paint phase watcher"
mechanism in the following patches.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/623
ClutterStage:after-paint is supposed to be emitted after all
painting is done, but before the frame is finished. However,
as it is right now, it is being emitted after each view is
painted -- on multi-monitor setups, after-frame is being
emitted multiple times.
Send after-paint only once, after all views are painted and
before finishing the frame.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/623
As a compositor toolkit, it makes sense to allow consumers
of Clutter interact with the stage views themselves. As such,
ClutterStageView should be a public class.
As such, it is now included in clutter.h and should not be
included directly.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/623
When libwacom is configured disabled, this error appears:
../clutter/clutter/x11/clutter-input-device-xi2.c: In function ‘clutter_input_device_xi2_finalize’:
../clutter/clutter/x11/clutter-input-device-xi2.c:122:7: error: ‘device_xi2’ undeclared (first use in this function)
if (device_xi2->inhibit_pointer_query_timer)
Fix it with the "obvious" solution.
This code was added in c1303bd642.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/611
When a user moves their cursor the perceived behaviour is that it will
pick what is under the cursor. However this isn't how picking works.
Picking does a virtual redraw of the screen, so in some cases what gets
picked isn't the same as what the user could see on the previous frame.
It more represents what will be drawn on the next frame than what is on
screen at present.
It may be unsafe to change these semantics, and they are useful anyway.
Just document it better.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/214
After 4faeb12731, the maximum time allowed for an update to happen
is calculated as:
max_render_time_allowed = refresh_interval - 1000 * sync_delay;
However, extremely small refresh intervals -- that come as consequence
to extremely high refresh rates -- may fall into an odd numerical range
when refresh_interval < 1000 * sync_delay. That would give us a negative
time.
To be extra cautious about it, add another sanity check for this case.
Change suggested by Jasper St. Pierre.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/363
The presentation timing logic (via `master_clock_get_swap_wait_time`) now
works unconditionally. By "works" we mean that a result of zero from
`master_clock_get_swap_wait_time` actually means zero now. Previously
zero could mean either a successful result of zero milliseconds or that
the backend couldn't get an answer. And a non-zero result is the same as
before.
This works even if the screen is "idle" and even if the backend doesn't
provide presentation timestamps. So now our two fallback throttling
mechanisms of relying on `CLUTTER_FEATURE_SWAP_THROTTLE` and decimating
to `clutter_get_default_frame_rate` can be deleted.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/406 and
https://bugzilla.gnome.org/show_bug.cgi?id=781835https://gitlab.gnome.org/GNOME/mutter/merge_requests/363
If `last_presentation_time` is zero (unsupported) or just very old
(system was idle) then we would like to avoid that triggering a large
number of loop interations. This will get us closer to the right answer
without iterating.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/363
That could happen if the backend did not provide presentation timestamps,
or if the screen was not changing other than the hardware cursor:
if (stage_cogl->last_presentation_time == 0||
stage_cogl->last_presentation_time < now - 150000)
{
stage_cogl->update_time = now;
return;
}
By setting `update_time` to `now`, master_clock_get_swap_wait_time()
returns 0:
gint64 now = g_source_get_time (master_clock->source);
if (min_update_time < now)
{
return 0;
}
else
{
gint64 delay_us = min_update_time - now;
return (delay_us + 999) / 1000;
}
However, zero is a value unsupported by the default master clock
due to:
if (swap_delay != 0)
return swap_delay;
All cases are now handled by extrapolating when the next presentation
time would be and calculating an appropriate update time to meet that.
We also need to add a check for `update_time == last_update_time`, which
is a situation that just became possible since we support old (or zero)
values of `last_presentation_time`. This avoids getting more than one
stage update per frame interval when input events arrive without
triggering a stage redraw (e.g. moving the hardware cursor).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/363
Instead of crazy refresh rates >1MHz falling back to 60Hz, just honour
them by rendering unthrottled (same as `sync_delay < 0`). Although I
wouldn't actually expect that path to ever be needed in reality, it just
ensures an infinite `while` loop never happens.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/363
When using evdev (for Wayland), the backend receives all device events
and queue them for clutter.
Hook up the pointer accessibility handlers in clutter's main processing
queue, so that we get better accuracy for pointer location.
We need to avoid doing this on X11 though because X11 relies on the raw
events for this to work reliably, so the same is already done in the
X11 backend when using X11.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/512
Pointer accessibility features requires to receive all pointer events
regardless of X11 grabs.
Add XI2 raw events mask and hook up the pointer accessibility handlers
to the raw motion and button press/release events.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/512
Add support for click assist, namely simulated secondary click (on a
long primary button press) and hover click support (simulate a click when
the pointer remains static for some time).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/512
Add the required signaling in place in clutter device manager to notify
the upper layers (namely, the shell) whenever a click assist delay or
gesture is started or stopped.
This will allow the shell to implement a visual feedback for click
assist operations.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/512
For accessibility features, being either keyboard accessibility to
implement mousekeys, or pointer accessibility to implement simulated
secondary click or dwell click, we need to have a virtual device.
Add that virtual device in ClutterInputDevice so it can be used either
for keyboard or pointer accessibility.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/512
Certain arguments like `-fno-omit-frame-pointer` break GIR creation.
Lets handle this like we do for the rest of mutter and duplicate the
relevant arguments from `clutter_c_args`.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/601
Spotted while adding tracing to swap buffers, we only enter
the first part of the if condition when use_clipped_redraw
is TRUE, so it's pretty safe to assume it's TRUE.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/197
The idea here is to be able to visualize and immediately
understand what is happening. Something like:
```
[ view1 ] [ view2 ]
[---- Layout ---][------ Paint ------][ Pick ]
[================== Update =====================]
```
But with colors. A few of the previous profiling data
sections were removed, since they didn't really add to
reading the graph.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/197
Add debug flags based on meson's `debug` option instead of `buildtype`.
This allows custom build configurations to behave like a debug or release build.
Add `-fno-omit-frame-pointer` to Mutter/Cogl. Not to Clutter though, as that would
require more changes to how Clutter's gir is created
Remove `-DG_DISABLE_CAST_CHECKS` from Clutter in debug builds
Add `-DG_DISABLE_CHECKS`, `-DG_DISABLE_ASSERT` and `-DG_DISABLE_CAST_CHECKS` to all
non-debug builds but `plain`, which explicitly should not have any compile flags
Use `cc.get_supported_arguments`, so it becomes more obvious to the user which flags
are set during compilation
https://gitlab.gnome.org/GNOME/mutter/merge_requests/497
Commit df7d8e2cb highlights a crash on test_destroy_destroy, in fact it could
happen that calling clutter_actor_destroy on a child while iterating on the
list, would implicitly call test_destroy_remove that tries to modify the list
at the same time. Causing a memory error.
So instead of manually free the children list, just ensure that this list is
valid and that when the object destruction is done, this is free'd.
See: https://gitlab.gnome.org/GNOME/mutter/merge_requests/576https://gitlab.gnome.org/GNOME/mutter/merge_requests/581
