Commit Graph

179 Commits

Author SHA1 Message Date
Robert Bragg
492f0e5d14 [material] Reduce the material API in preperation for releasing Clutter 1.0
There were a number of functions intended to support creating of new
primitives using materials, but at this point they aren't used outside of
Cogl so until someone has a usecase and we can get feedback on this
API, it's being removed before we release Clutter 1.0.
2009-05-28 02:43:34 +01:00
Robert Bragg
bc8a18ebc3 [cogl-material] Support string based blending and layer combine descriptions
Setting up layer combine functions and blend modes is very awkward to do
programatically.  This adds a parser for string based descriptions which are
more consise and readable.

E.g. a material layer combine function could now be given as:
  "RGBA = ADD (TEXTURE[A], PREVIOUS[RGB])"
or
  "RGB = REPLACE (PREVIOUS)"
  "A = MODULATE (PREVIOUS, TEXTURE)"

The simple syntax and grammar are only designed to expose standard fixed
function hardware, more advanced combining must be done with shaders.

This includes standalone documentation of blend strings covering the aspects
that are common to blending and texture combining, and adds documentation
with examples specific to the new cogl_material_set_blend() and
cogl_material_layer_set_combine() functions.

Note: The hope is to remove the now redundant bits of the material API
before 1.0
2009-05-28 02:43:28 +01:00
Emmanuele Bassi
c56d5b1468 [cogl] Remove max_waste argument from Texture ctors
The CoglTexture constructors expose the "max-waste" argument for
controlling the maximum amount of wasted areas for slicing or,
if set to -1, disables slicing.

Slicing is really relevant only for large images that are never
repeated, so it's a useful feature only in controlled use cases.
Specifying the amount of wasted area is, on the other hand, just
a way to mess up this feature; 99% the times, you either pull this
number out of thin air, hoping it's right, or you try to do the
right thing and you choose the wrong number anyway.

Instead, we can use the CoglTextureFlags to control whether the
texture should not be sliced (useful for Clutter-GST and for the
texture-from-pixmap actors) and provide a reasonable value for
enabling the slicing ourself. At some point, we might even
provide a way to change the default at compile time or at run time,
for particular platforms.

Since max_waste is gone, the :tile-waste property of ClutterTexture
becomes read-only, and it proxies the cogl_texture_get_max_waste()
function.

Inside Clutter, the only cases where the max_waste argument was
not set to -1 are in the Pango glyph cache (which is a POT texture
anyway) and inside the test cases where we want to force slicing;
for the latter we can create larger textures that will be bigger than
the threshold we set.

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Signed-off-by: Robert Bragg <robert@linux.intel.com>
Signed-off-by: Neil Roberts <neil@linux.intel.com>
2009-05-23 19:35:19 +01:00
Emmanuele Bassi
2fdc7e6a1b [cogl] Move debugging to a configure-time switch
Currently, COGL depends on defining debug symbols by manually
modifying the source code. When it's done, it will forcefully
print stuff to the console.

Since COGL has also a pretty, runtime selectable debugging API
we might as well switch everything to it.

In order for this to happen, configure needs a new:

        --enable-cogl-debug

command line switch; this will enable COGL debugging, the
CoglHandle debugging and will also turn on the error checking
for each GL operation.

The default setting for the COGL debug defines is off, since
it slows down the GL operations; enabling it for a particular
debug build is trivial, though.
2009-05-19 16:00:18 +01:00
Emmanuele Bassi
cf4a49061a [cogl] Rework the debug messages
COGL has a debug message system like Clutter's own. In parallel,
it also uses a coupld of #defines. Spread around there are also
calls to printf() instead to the more correct g_log* wrappers.

This commit tries to unify and clean up the macros and the
debug message handling inside COGL to be more consistent.
2009-05-19 14:44:29 +01:00
Emmanuele Bassi
e73a3899e5 Remove duplicate cogl-internal.h header
The cogl-internal.h header has been moved inside cogl/common in
commit 8a1b4f8326 but has been left behind inside cogl/gl and
cogl/gles.
2009-05-19 14:42:37 +01:00
Emmanuele Bassi
642f551321 [build] Link Cogl against -lm
We use math routines inside Cogl, so it's correct to have it in
the LIBADD line. In normal usage something else was pulling in
-lm, but the introspection is relying on linking against the
convenience library.

Based on a patch by: Colin Walters <walters@verbum.org>

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2009-05-14 23:23:00 +01:00
Robert Bragg
6db0d42193 [cogl] Remove the COGL{enum,int,uint} typedefs
COGLenum, COGLint and COGLuint which were simply typedefs for GL{enum,int,uint}
have been removed from the API and replaced with specialised enum typedefs, int
and unsigned int. These were causing problems for generating bindings and also
considered poor style.

The cogl texture filter defines CGL_NEAREST and CGL_LINEAR etc are now replaced
by a namespaced typedef 'CoglTextureFilter' so they should be replaced with
COGL_TEXTURE_FILTER_NEAREST and COGL_TEXTURE_FILTER_LINEAR etc.

The shader type defines CGL_VERTEX_SHADER and CGL_FRAGMENT_SHADER are handled by
a CoglShaderType typedef and should be replaced with COGL_SHADER_TYPE_VERTEX and
COGL_SHADER_TYPE_FRAGMENT.

cogl_shader_get_parameteriv has been replaced by cogl_shader_get_type and
cogl_shader_is_compiled. More getters can be added later if desired.
2009-05-12 14:53:44 +01:00
Neil Roberts
58918f0201 [build] Fix out-of-tree builds for Cogl
Commit 43fa38fcf5 broke out-of-tree builds by removing some of the
builddir directories from the include path. builddir/clutter/cogl and
builddir/clutter are needed because cogl.h and cogl-defines-gl.h are
automatically generated by the configure script. The main clutter
headers are in the srcdir so this needs to be in the path too.
2009-05-12 14:16:46 +01:00
Emmanuele Bassi
39d39ba14b [build] Clean up the makefile
Split out the files into their own variables to clean up the
Makefile template; also use top_srcdir with the header files
instead of top_builddir.
2009-05-06 17:59:25 +01:00
Emmanuele Bassi
3bde41c63c Fix inclusion guards and headers
The C++ inclusion guards G_BEGIN_DECLS and G_END_DECLS are
defined by GLib; so we need to include glib.h before using
them.
2009-05-06 17:59:25 +01:00
Robert Bragg
869a2b4167 [cogl-offscreen] Cleans up the cogl offscreen API and adds documentation
There were several functions I believe no one is currently using that were
only implemented in the GL backend (cogl_offscreen_blit_region and
cogl_offscreen_blit) that have simply been removed so we have a chance to
think about design later with a real use case.

There was one nonsense function (cogl_offscreen_new_multisample) that
sounded exciting but in all cases it just returned COGL_INVALID_HANDLE
(though at least for GL it checked for multisampling support first!?)
it has also been removed.

The MASK draw buffer type has been removed. If we want to expose color
masking later then I think it at least would be nicer to have the mask be a
property that can be set on any draw buffer.

The cogl_draw_buffer and cogl_{push,pop}_draw_buffer function prototypes
have been moved up into cogl.h since they are for managing global Cogl state
and not for modifying or creating the actual offscreen buffers.

This also documents the API so for example desiphering the semantics of
cogl_offscreen_new_to_texture() should be a bit easier now.
2009-05-02 04:12:26 +01:00
Havoc Pennington
cb344560dc add cogl_push_draw_buffer() and cogl_pop_draw_buffer()
These are necessary if nesting redirections to an fbo,
otherwise there's no way to know how to restore
previous state.

glPushAttrib(GL_COLOR_BUFFER_BIT) would save draw buffer
state, but also saves a lot of other stuff, and
cogl_draw_buffer() relies on knowing about all draw
buffer state changes. So we have to implement a
draw buffer stack ourselves.

Signed-off-by: Robert Bragg <robert@linux.intel.com>
2009-05-02 04:12:26 +01:00
Robert Bragg
c8862e35cc [cogl] Only expose CoglBitmap as a CoglHandle
It was inconsistent that we exposed the CoglBitmap struct instead of an
opaque CoglHandle.
2009-05-02 04:12:26 +01:00
Robert Bragg
7e9685294e [cogl] Updates all file headers and removes lots of trailing white space
Adds missing notices, and ensures all the notices are consistent. The Cogl
blurb also now reads:

 * Cogl
 *
 * An object oriented GL/GLES Abstraction/Utility Layer
2009-05-02 04:12:25 +01:00
Robert Bragg
598939cee1 [gl/cogl.c] #include <gmodule.h> for OS X builds
In unifying the {gl,gles}/cogl.c code recently, moving most of the code into
common/cogl.c the gmodule.h include was also mistakenly moved.

Thanks to Felix Rabe for reporting this issue.

Note: I haven't tested this fix myself, as I'm not set up to be able to
build for OS X
2009-04-20 14:20:37 +01:00
Robert Bragg
ed272213f0 [cogl-handle] Optimize how we define cogl handles
The cogl_is_* functions were showing up quite high on profiles due to
iterating through arrays of cogl handles.

This does away with all the handle arrays and implements a simple struct
inheritance scheme. All cogl objects now add a CoglHandleObject _parent;
member to their main structures. The base object includes 2 members a.t.m; a
ref_count, and a klass pointer. The klass in turn gives you a type and
virtual function for freeing objects of that type.

Each handle type has a _cogl_##handle_type##_get_type () function
automatically defined which returns a GQuark of the handle type, so now
implementing the cogl_is_* funcs is just a case of comparing with
obj->klass->type.

Another outcome of the re-work is that cogl_handle_{ref,unref} are also much
more efficient, and no longer need extending for each handle type added to
cogl. The cogl_##handle_type##_{ref,unref} functions are now deprecated and
are no longer used internally to Clutter or Cogl. Potentially we can remove
them completely before 1.0.
2009-04-02 11:58:43 +01:00
Robert Bragg
c2afbd415e Unifies 90% of the code in {gl,gles}/cogl.c in common/cogl.c
This code keeps on diverging and we get bugs and fixes in one version but
not the other. This should make things a bit more maintainable.
2009-04-01 13:19:35 +01:00
Robert Bragg
8a2145eb8b Removes cogl_blend_func prototype from cogl-internal.h
cogl_blend_func was removed a while ago so this was just a left over from then
2009-03-30 18:02:03 +01:00
Robert Bragg
d7c5fa4b61 [cogl] Move rect and poly drawing code from cogl-texture.c to cogl-primitives.c
None of this code directly related to implementing CoglTextures, and the
code was needlessly duplicated between the GL and GLES backends. This moves
the cogl_rectangle* and cogl_polygon* code into common/cogl-primitives.c
makes which makes lot of sense since the two copies keep needlessly
diverging introducing or fixing bugs in one but not the other. For instance
I came accross one such bug regarding the enabling of texture units when
unifying the code.
2009-03-23 16:32:07 +00:00
Johan Bilien
7b7ece9eda Allow using array of vertices even without textures
It's often nice to be able to draw a batch of vertices, even if these
have no texture coordinates. This add a cogl_rectangles, similar to
cogl_rectangles_with_texture_coords, only without.
2009-03-23 12:41:41 +00:00
Robert Bragg
9611f33dd6 [cogl] Don't endlessly print the same warning regarding layer fallbacks
There are various constraints for when we can support multi-texturing and
when they can't be met we try and print a clear warning explaining why the
operation isn't supported, but we shouldn't endlessly repeat the warning for
every primitive of every frame. This patch fixes that.
2009-03-16 16:19:51 +00:00
Havoc Pennington
7598c551a2 [cogl] Flush matrix before clip planes
glClipPlane() is affected by modelview matrix so we need to flush
before calling it.

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2009-03-16 15:10:33 +00:00
Robert Bragg
e1b8e9445d Maintain the Cogl assumption that the modelview matrix is normally current
_cogl_add_path_to_stencil_buffer and _cogl_add_stencil_clip were leaving
the projection matrix current when calling cogl_rectangle which was
upsetting _cogl_current_matrix_state_flush.
2009-03-12 18:55:41 +00:00
Robert Bragg
f52262d5ad Removes need for casting (const float *) to (GLfloat *) in _cogl_set_clip_planes
This removes cogl.c:apply_matrix(), and makes cogl.c:project_vertex() use
cogl_matrix_transform_point instead.
2009-03-12 18:53:22 +00:00
Havoc Pennington
11349b6c74 Virtualize GL matrix operations and use a client-side matrix when GL is indirect
This is useful because sometimes we need to get the current matrix, which
is too expensive when indirect rendering.

In addition, this virtualization makes it easier to clean up the API in
the future.
2009-03-12 18:32:45 +00:00
Emmanuele Bassi
a06dd94eb8 [cogl] Initialize all members of CoglContext
Some members of CoglContext still escape initialization.
2009-03-10 18:05:08 +00:00
Emmanuele Bassi
949e37d332 [cogl] Initialize boolean flag in CoglContext
The private CoglContext is created using g_malloc() and not
zeroed; this means we have to initialize the values we are
going to check, to avoid hitting garbage.

Thanks to Tommi Komulainen.
2009-03-10 17:53:51 +00:00
Robert Bragg
f816644022 [cogl-matrix] Documents that CoglMatrix members should be considered read only
In the future if we want to annotate matrices with internal flags, and add
caching of the inverse matrix then we need to ensure that all matrix
modifications are done by cogl_matrix API so we'd know when to dirty the
cache or update the flags.

This just adds documentation to that effect, and assuming the most likley
case where someone would try and directly write to matrix members would
probably be to load a constant matrix other than the identity matrix; I
renamed cogl_matrix_init_from_gl_matrix to cogl_matrix_init_from_array to
make it seem more general purpose.
2009-02-26 16:42:32 +00:00
Owen W. Taylor
3490dcaba4 Fix x/y confusion for GL_TEXTURE_RECTANGLE_ARB
When "denormalizing" for texture rectangles, multiple X coordinates
by the X size and Y coordinates by the Y size.

http://bugzilla.openedhand.com/show_bug.cgi?id=1479
2009-02-26 11:27:21 +00:00
Emmanuele Bassi
9e9c615e49 Add runtime debug messages for COGL
Clutter is able to show debug messages written using the CLUTTER_NOTE()
macro at runtime, either by using an environment variable:

  CLUTTER_DEBUG=...

or by using a command line switch:

  --clutter-debug=...
  --clutter-no-debug=...

Both are parsed during the initialization process by using the
GOption API.

COGL would benefit from having the same support.

In order to do this, we need a cogl_get_option_group() function in
COGL that sets up a GOptionGroup for COGL and adds a pre-parse hook
that will check the COGL_DEBUG environment variable. The OptionGroup
will also install two command line switches:

  --cogl-debug
  --cogl-no-debug

With the same semantics of the Clutter ones.

During Clutter initialization, the COGL option group will be attached
to the GOptionContext used to parse the command line options passed
to a Clutter application.

Every debug message written using:

  COGL_NOTE (SECTION, "message format", arguments);

Will then be printed only if SECTION was enabled at runtime.

This whole machinery, like the equivalent one in Clutter, depends on
a compile time switch, COGL_ENABLE_DEBUG, which is enabled at the same
time as CLUTTER_ENABLE_DEBUG. Having two different symbols allows
greater granularity.
2009-02-23 13:00:52 +00:00
Robert Bragg
25fc1b85ab [Cogl] Fixes automatic handling of the GL blend enable state.
Bug #1460 - Handling of flags in cogl_material_set_color

Cogl automatically enables/disables blending based on whether the source color
has an alhpa < 1.0, or if any textures with an alpha component are in use, but
it wasn't doing it quite right.

At the same time I removed some of the dirty flags which on second thought
are nothing more than micro-optimsations that only helped clutter the code.

thanks to Owen Taylor for reporting the bug
2009-02-23 10:49:35 +00:00
Robert Bragg
e91fe8817d [Cogl] the cogl_get_*_matrix functions now work with CoglMatrix types
Since the CoglMatrix type was added for supporting texture matrices recently
it made sense to be consistent accross the Cogl API and use the Cogl type
over the GL style GLfloat m[16] arrays.
2009-02-23 10:49:35 +00:00
Emmanuele Bassi
268fa9c7ab Initialize a variable to avoid warnings
The gl_mode variable was not initialized, and the compiler complained
when using the anal-retentive compiler flags.
2009-02-18 18:45:58 +00:00
Robert Bragg
89d8ebcbb0 [Cogl] Renames cogl_paint_init to cogl_clear and adds a cogl_disable_fog function
cogl_paint_init was a bit too miscellaneous; it mainly cleared the color, depth
and stencil buffers but arbitrarily it also disabled fogging and lighting.

It no longer disables lighting, since we know Cogl never enables lighting and
disabling of fog is now handled with a seperate function.

Since I noticed cogl_set_fog was taking a density argument documented as
"Ignored" I've also added a mode argument to cogl_set_fog which exposes the
exponential fog modes which can make use of the density.
2009-02-18 16:00:52 +00:00
Neil Roberts
43a5fef73d Call glActiveTexture and glClientActiveTexture through cogl_get_proc_address
All GL functions that are defined in a version later than 1.1 need to
be called through cogl_get_proc_address because the Windows GL DLL
does not export them to directly link against.
2009-02-16 12:46:36 +00:00
Robert Bragg
06bfc00fbc [Cogl] Renames cogl_fog_set to cogl_set_fog for consistency
More things follow the <object>_set_<property> convention.
2009-02-09 14:15:06 +00:00
Neil Roberts
acdc36a7c5 [cogl-texture] Fix offset to next quad when flushing the log
When the quad log contains multiple textures (such as when a sliced
texture is drawn) it dispatches the log with multiple calls to
flush_quad_batch and walks a pointer along the list of vertices.
However this pointer was being incremented by only one vertex so the
next quad would be drawn with three of the vertices from the last
quad.
2009-02-05 20:29:25 +00:00
Neil Roberts
c50935edca Fix building GLES 2 after the material branch merge
- In cogl-material.h it directly sets the values of the
  CoglMaterialLayerCombineFunc to some GL_* constants. However these
  aren't defined in GLES 2 beacuse it has no fixed function texture
  combining. Instead the CGL_* versions are now used. cogl-defines.h
  now sets these to either the GL_* version if it is available,
  otherwise it directly uses the number.

- Under GLES 2 cogl-material.c needs to access the CoglTexture struct
  so it needs to include cogl-texture-private.h

- There are now #define's in cogl-gles2-wrapper.h to remap the GL
  function names to the wrapper names. These are disabled in
  cogl-gles2-wrapper.c by defining COGL_GLES2_WRAPPER_NO_REMAP.

- Added missing wrappers for glLoadMatrixf and glMaterialfv.

- Renamed the TexEnvf wrapper to TexEnvi because the latter is used
  instead from the material API.
2009-02-02 21:57:41 +00:00
Neil Roberts
da9f956fd1 [cogl] Add an NULL terminator to the call to material_flush_gl_state
This fixes a compiler warning and a potential crash.
2009-01-29 12:21:56 +00:00
Robert Bragg
02127858f3 Another Cogl gl vs gles normalizaion pass
This tries to make a number of files more comparable with the intention of
moving some code into cogl/common/

Files normalized:
 cogl.c
 cogl-context.c
 cogl-context.h
 cogl-texture.c
2009-01-28 17:20:16 +00:00
Robert Bragg
c4b4500059 Changes cogl_rectangle to take x1, y1, x2, y2 args not x1, y1, width, height
This makes it consistent with cogl_rectangle_with_{multi,}texture_coords.
Notably the reason cogl_rectangle_with_{multi,}texture_coords wasn't changed
instead is that the former approach lets you describe back facing rectangles.
(though technically you could pass negative width/height values to achieve
 this; it doesn't seem as neat.)
2009-01-28 17:20:15 +00:00
Robert Bragg
1d86b04e06 Adds some debug code to _cogl_journal_flush_quad_batch
The code is #if 0 guarded, but when uncommented it outlines all drawn
rectangles with an un-blended red, green or blue border. This may e.g. help
with debugging texture slicing issues or blending issues, plus it looks quite
cool.
2009-01-28 17:20:15 +00:00
Neil Roberts
ba2fd8a9d3 [cogl-texture] Fix order of tex coords when compensating for waste
When drawing a texture with waste in _cogl_multitexture_unsliced_quad
it scales the texture coordinates so that the waste is not
included. However the formula was the wrong way around so it was
calculating as if the texture coordinates are ordered x1,x2,y1,y2 but
it is actually x1,y1,x2,y2.
2009-01-28 12:57:06 +00:00
Neil Roberts
954c0853cd [cogl-texture] Reset size of vertex log after drawing a polygon
Otherwise trying to render a rectangle after a polygon doesn't work
because it expects the array to be empty when it starts logging
vertices.
2009-01-28 12:24:11 +00:00
Neil Roberts
e6fb58e129 Fix rectangles_with_multitexture_coords for sliced without tex coords
When the texture is sliced it drops back to a fallback function and
passes it the texture coordinates from the rectangle. However if no
tex coords are given it would crash. Now it passes the default
0.0->1.0 tex coords instead.
2009-01-28 12:24:10 +00:00
Neil Roberts
c18d945dc7 Fix _cogl_texture_unsliced_quad when no texture coordinates are given
If no texture coordinates are given then texture_unsliced_quad tries
to generate its own coordinates. However it also tries to read the
texture coordinates to check if they are in [0.0,1.0] range so it will
crash before it reaches that.
2009-01-28 12:24:10 +00:00
Emmanuele Bassi
8dca5c73bc Reuse the layers list
Instead of getting the layers list twice from the Material, we
can reuse the list when we need to retrieve the first layer.
2009-01-28 11:57:49 +00:00
Emmanuele Bassi
31e4ca5733 Fallout from cogl-material merge
When enabling the maintainer CFLAGS the compiler got very angry
at the code that has been merged.
2009-01-27 16:02:04 +00:00
Robert Bragg
a2e52eb3be Support scaling on the z axis with cogl_scale
This simply adds a z argument to cogl_scale and updates clutter-actor.c
to pass 1.0 for the z scale.
2009-01-27 15:20:13 +00:00