For some transformations we need to be able to set the Z component of
the pivot point.
Unlike :pivot-point, the Z coordinate is not normalized because actors
are 2D surfaces.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
The pivot point is a point in normalized coordinates space around which
all transformations revolve.
It supercedes the anchor point and the per-transformation center points
as well as the gravity settings, and tries to sort out the mess that
is the modelview matrix set up in ClutterActor.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
The ClutterActor:depth property has always been a bit of a misnomer:
actors are 2D flat surfaces, so they cannot have "depth"; the property
defines the position on the Z axis.
Another side effect of the :depth property is that it decides the
default paint and allocation order on insertion, and that setting it
will call the ClutterContainer.sort_depth_order() method. This has
proven to be a fairly bad design decision that we strung along from the
0.x days, as it gives a false impression of being able to change the
paint and allocation order simply by changing the position on the Z
axis — something that, in reality, requires depth testing to be enabled
during the paint sequence of an actor's parent.
For 2.0 we need a clean break from the side effects, and a better
defined interface.
ClutterActor:z-position is essentially what ClutterActor:depth is, but
doesn't call into ClutterContainer, and has a more apt name.
https://bugzilla.gnome.org/show_bug.cgi?id=679465
The :x-expand and :y-expand flags on ClutterActor are used to signal
that an actor should expand horizontally and/or vertically - i.e. that
its parent's layout management policy should try to assign extra space
to the actor when allocating it.
The expand flags are automatic: when set on a leaf node in the actor
tree, they will bubble up through the parent and grandparents up to the
top level actor; during allocation, the actors with children will lazily
compute whether their children needs to expand.
It should be possible to set up the delay of a transition, but since
we start the Transition instance before returning control to the caller,
we cannot use clutter_actor_get_transition() to do it without something
extra-awkward, like:
transition = clutter_actor_get_transition (actor, "width");
clutter_timeline_stop (transition);
clutter_timeline_set_delay (transition, 1000);
clutter_timeline_start (transition);
for each property involved. It's much easier to add a delay to the
easing state of an actor.
Clutter is meant to be, and I quote from the README, a toolkit:
for creating fast, compelling, portable, and dynamic graphical
user interfaces
and yet the default mode of operation for setting an actor's state on
the scene graph (position, size, opacity, rotation, scaling, depth,
etc.) is *not* dynamic. We assume a static UI, and then animate it.
This is the wrong way to design an API for a toolkit meant to be used to
create animated user interfaces. The default mode of operation should be
to implicitly animate every state transition, and only allow skipping
the animation if the user consciously decides to do so — i.e. the design
tenet of the API should be to make The Right Thing™ by default, and make
it really hard (or even impossible) to do The Wrong Thing™.
So we should identify "animatable" properties, i.e. those properties
that should be implicitly animated by ClutterActor, and use the
animation framework we provide to tween the transitions between the
current state and the desired state; the implicit animation should
happen when setting these properties using the public accessors, and not
through some added functionality. For instance, the following:
clutter_actor_set_position (actor, newX, newY);
should not make the actor jump to the (newX, newY) point; it should
tween the actor's position between the current point and the desired
point.
Since we have to maintain backward compatibility with existing
applications, we still need to mark the transitions explicitly, but we
can be smart about it, and treat transition states as a stack that can
be pushed and popped, e.g.:
clutter_actor_save_easing_state (actor);
clutter_actor_set_easing_duration (actor, 500);
clutter_actor_set_position (actor, newX, newY);
clutter_actor_set_opacity (actor, newOpacity);
clutter_actor_restore_easing_state (actor);
And we can even start stacking animations, e.g.:
clutter_actor_save_easing_state (actor);
clutter_actor_set_easing_duration (actor, 500);
clutter_actor_set_position (actor, newX, newY);
clutter_actor_save_easing_state (actor);
clutter_actor_set_easing_duration (actor, 500);
clutter_actor_set_easing_mode (actor, CLUTTER_LINEAR);
clutter_actor_set_opacity (actor, newOpacity);
clutter_actor_set_depth (actor, newDepth);
clutter_actor_restore_easing_state (actor);
clutter_actor_restore_easing_state (actor);
And so on, and so forth.
The implementation takes advantage of the newly added Transition API,
which uses only ClutterTimeline sub-classes and ClutterInterval, to cut
down the amount of signal emissions and memory management of object
instances; as well of using the ClutterAnimatable interface for custom
properties and interpolation of values.
Since the code dealing with ClutterShader is pretty self-contained, now,
we can safely move it outside of the main ClutterActor source file and
into its own. This will allow us to just drop a bunch of files when
branching for 2.0.
Now that we reinstated Group to its "former glory", we need to ensure
that applications using the deprecated containers with the new DOM API
in ClutterActor can actually work - or, at least, not break horribly.
This actually means making sure that ClutterStage and ClutterGroup can
cope with the DOM, while retaining their old implementations, as well as
their bizarre idiosyncrasies and their utter, utter brokenness.
ClutterTransformInfo is a (private) ancillary data structure that
contains all the decomposed transformation data, i.e. rotation angles
and centers, scale factors and centers, and anchor point. This data
structure is stored in the GData of the actor instance instead of the
actor's private data. This change gives us:
• a smaller, cleaner private data structure;
• no size penalty for untransformed actors;
• static constant storage for the defaults, shared across all
instances;
• cache locality for all the decomposed transformation data,
given that the structure size is smaller.
At the end of the day, the only authoritative piece of information for
actor transformation is the CoglMatrix that we initialize in
apply_transform() from all the decomposed parameters, and that can stay
inside the private data structure of ClutterActor.
Remove four more floats from ClutterActorPrivate.
The fixed minimum and natural sizes should be stored inside the
ClutterLayoutInfo structure, along with the fixed position.
ClutterActor has various properties controlling the allocation:
- x-align, y-align
- margin-top, margin-bottom, margin-left, margin-right
These properties should adjust the ClutterActorBox passed from the
parent actor to its children when calling clutter_actor_allocate(),
so that the child can just allocate its children at the right origin
with the right available size.
Although this patch doesn't make them public, it documents the
_clutter_actor_get/apply_relative_transform_matrix functions so they
could easily be made public if desired. I think these API could be
useful to have publicly, and I originally documented them because I
thought they would be needed in the MX toolkit.
The G_CONST_RETURN define in GLib is, and has always been, a bit fuzzy.
We always used it to conform to the platform, at least for public-facing
API.
At first I assumed it has something to do with brain-damaged compilers
or with weird platforms where const was not really supported; sadly,
it's something much, much worse: it's a define that can be toggled at
compile-time to remove const from the signature of public API. This is a
truly terrifying feature that I assume was added in the past century,
and whose inception clearly had something to do with massive doses of
absynthe and opium — because any other explanation would make the
existence of such a feature even worse than assuming drugs had anything
to do with it.
Anyway, and pleasing the gods, this dubious feature is being
removed/deprecated in GLib; see bug:
https://bugzilla.gnome.org/show_bug.cgi?id=644611
Before deprecation, though, we should just remove its usage from the
whole API. We should especially remove its usage from Cally's internals,
since there it never made sense in the first place.
This adds a new public function to queue a rerun of an effect. If
nothing else queues a redraw then when the effect's actor is painted
the effect will be run without the CLUTTER_EFFECT_RUN_ACTOR_DIRTY
flag. This allows parametrised offscreen effects to report that they
need to redraw the image without having to redraw the underlying
actor. This will be used to implement the 'transparency' effect of
ClutterActor.
If multiple redraws are queued with different effects then redrawing
is started from the one that occurs last in the list of effects.
Internally the function is a wrapper around the new function
_clutter_actor_queue_redraw_full. This is intended to be the sole
point of code for queuing redraws on an actor. It has parameters for
the clip and the effect. The other two existing functions to queue a
redraw (one with a clip and one without) now wrap around this function
by passing a NULL effect.
This implements a variation of frustum culling whereby we convert screen
space clip rectangles into eye space mini-frustums so that we don't have
to repeatedly transform actor paint-volumes all the way into screen
coordinates to perform culling, we just have to apply the modelview
transform and then determine each points distance from the planes that
make up the clip frustum.
By avoiding the projective transform, perspective divide and viewport
scale for each point culled this makes culling much cheaper.
This is needed if an effect wants to temporarily override the paint
opacity. It needs to be able to restore the old opacity override in
the post_paint handler otherwise it would replace the effect of the
opacity override from any outer effects.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2541
The 'in_clone_paint' parameter of the private function
_clutter_actor_set_in_clone_paint() shadowed the private function
in_clone_paint(). Rename this parameter to 'is_in_clone_paint' to remove
a compiler warning.
Replace the opacity_parent with an opacity_override variable, to allow
direct overriding of the paint opacity and simplify this mechanism
somewhat.
This also required a new private flag, in_clone_paint, to maintain the
functionality of the public function clutter_actor_is_in_clone_paint()
This makes it possible to choose the traversal order; either depth first
or breadth first and when visiting actors in a depth first order there
is now a callback called before children are traversed and one called
after. Some tasks such as unrealizing actors need to explicitly control
the traversal order to maintain the invariable that all children of an
actor are unrealized before we actually mark the parent as unrealized.
The callbacks are now passed the relative depth in the graph of the
actor being visited and instead of only being able to return a boolean
to bail out of further traversal it can now do one of: continue,
skip_children or break. To implement something like unrealize it's
desirable to skip children that you find have already been unrealized.
The last_paint_box for an actor represents its "normal" position - we
shouldn't update it or use it to cull drawing if we are painting
a clone of the actor. Tracking whether we are painting a clone is
done by adding _clutter_actor_push/pop_clone_paint() and a global
"clone paint level".
http://bugzilla.clutter-project.org/show_bug.cgi?id=2396
For internal usage, writing:
clutter_actor_get_name (actor) != NULL
? clutter_actor_get_name (actor)
: G_OBJECT_TYPE_NAME (actor)
is overly verbose and does two type checks. A simple, internal method
for getting the same result without type checks would be much more
appreciated.
