mutter/cogl/cogl-primitives.c

1149 lines
39 KiB
C
Raw Normal View History

/*
* Cogl
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* A Low Level GPU Graphics and Utilities API
*
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
* Copyright (C) 2007,2008,2009,2010 Intel Corporation.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "cogl-debug.h"
#include "cogl-context-private.h"
#include "cogl-journal-private.h"
#include "cogl-texture-private.h"
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
#include "cogl-pipeline-private.h"
#include "cogl-pipeline-opengl-private.h"
#include "cogl-vertex-buffer-private.h"
#include "cogl-framebuffer-private.h"
#include "cogl-attribute-private.h"
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 07:17:09 -04:00
#include "cogl-private.h"
#include "cogl-meta-texture.h"
#include "cogl-framebuffer-private.h"
#include "cogl1-context.h"
Add -Wmissing-declarations to maintainer flags and fix problems This option to GCC makes it give a warning whenever a global function is defined without a declaration. This should catch cases were we've defined a function but forgot to put it in a header. In that case it is either only used within one file so we should make it static or we should declare it in a header. The following changes where made to fix problems: • Some functions were made static • cogl-path.h (the one containing the 1.0 API) was split into two files, one defining the functions and one defining the enums so that cogl-path.c can include the enum and function declarations from the 2.0 API as well as the function declarations from the 1.0 API. • cogl2-clip-state has been removed. This only had one experimental function called cogl_clip_push_from_path but as this is unstable we might as well remove it favour of the equivalent cogl_framebuffer_* API. • The GLX, SDL and WGL winsys's now have a private header to define their get_vtable function instead of directly declaring in the C file where it is called. • All places that were calling COGL_OBJECT_DEFINE need to have the cogl_is_whatever function declared so these have been added either as a public function or in a private header. • Some files that were not including the header containing their function declarations have been fixed to do so. • Any unused error quark functions have been removed. If we later want them we should add them back one by one and add a declaration for them in a header. • _cogl_is_framebuffer has been renamed to cogl_is_framebuffer and made a public function with a declaration in cogl-framebuffer.h • Similarly for CoglOnscreen. • cogl_vdraw_indexed_attributes is called cogl_framebuffer_vdraw_indexed_attributes in the header. The definition has been changed to match the header. • cogl_index_buffer_allocate has been removed. This had no declaration and I'm not sure what it's supposed to do. • CoglJournal has been changed to use the internal CoglObject macro so that it won't define an exported cogl_is_journal symbol. • The _cogl_blah_pointer_from_handle functions have been removed. CoglHandle isn't used much anymore anyway and in the few places where it is used I think it's safe to just use the implicit cast from void* to the right type. • The test-utils.h header for the conformance tests explicitly disables the -Wmissing-declaration option using a pragma because all of the tests declare their main function without a header. Any mistakes relating to missing declarations aren't really important for the tests. • cogl_quaternion_init_from_quaternion and init_from_matrix have been given declarations in cogl-quaternion.h Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-03-06 13:21:28 -05:00
#include "cogl-primitives-private.h"
#include <string.h>
#include <math.h>
#define _COGL_MAX_BEZ_RECURSE_DEPTH 16
typedef struct _TextureSlicedQuadState
{
CoglFramebuffer *framebuffer;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
CoglPipeline *pipeline;
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
CoglTexture *main_texture;
float tex_virtual_origin_x;
float tex_virtual_origin_y;
float quad_origin_x;
float quad_origin_y;
float v_to_q_scale_x;
float v_to_q_scale_y;
float quad_len_x;
float quad_len_y;
CoglBool flipped_x;
CoglBool flipped_y;
} TextureSlicedQuadState;
typedef struct _TextureSlicedPolygonState
{
const CoglTextureVertex *vertices;
int n_vertices;
int stride;
CoglAttribute **attributes;
} TextureSlicedPolygonState;
static void
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
log_quad_sub_textures_cb (CoglTexture *texture,
const float *subtexture_coords,
const float *virtual_coords,
void *user_data)
{
TextureSlicedQuadState *state = user_data;
CoglFramebuffer *framebuffer = state->framebuffer;
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
CoglTexture *texture_override;
float quad_coords[4];
#define TEX_VIRTUAL_TO_QUAD(V, Q, AXIS) \
do { \
Q = V - state->tex_virtual_origin_##AXIS; \
Q *= state->v_to_q_scale_##AXIS; \
if (state->flipped_##AXIS) \
Q = state->quad_len_##AXIS - Q; \
Q += state->quad_origin_##AXIS; \
} while (0);
TEX_VIRTUAL_TO_QUAD (virtual_coords[0], quad_coords[0], x);
TEX_VIRTUAL_TO_QUAD (virtual_coords[1], quad_coords[1], y);
TEX_VIRTUAL_TO_QUAD (virtual_coords[2], quad_coords[2], x);
TEX_VIRTUAL_TO_QUAD (virtual_coords[3], quad_coords[3], y);
#undef TEX_VIRTUAL_TO_QUAD
COGL_NOTE (DRAW,
"~~~~~ slice\n"
"qx1: %f\t"
"qy1: %f\n"
"qx2: %f\t"
"qy2: %f\n"
"tx1: %f\t"
"ty1: %f\n"
"tx2: %f\t"
"ty2: %f\n",
quad_coords[0], quad_coords[1],
quad_coords[2], quad_coords[3],
subtexture_coords[0], subtexture_coords[1],
subtexture_coords[2], subtexture_coords[3]);
/* We only need to override the texture if it's different from the
main texture */
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
if (texture == state->main_texture)
texture_override = NULL;
else
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
texture_override = texture;
_cogl_journal_log_quad (framebuffer->journal,
quad_coords,
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
state->pipeline,
1, /* one layer */
texture_override, /* replace the layer0 texture */
subtexture_coords,
4);
}
typedef struct _ValidateFirstLayerState
{
CoglPipeline *override_pipeline;
} ValidateFirstLayerState;
static CoglBool
validate_first_layer_cb (CoglPipeline *pipeline,
int layer_index,
void *user_data)
{
ValidateFirstLayerState *state = user_data;
CoglPipelineWrapMode clamp_to_edge =
COGL_PIPELINE_WRAP_MODE_CLAMP_TO_EDGE;
CoglPipelineWrapMode wrap_s;
CoglPipelineWrapMode wrap_t;
/* We can't use hardware repeat so we need to set clamp to edge
* otherwise it might pull in edge pixels from the other side. By
* default WRAP_MODE_AUTOMATIC becomes CLAMP_TO_EDGE so we only need
* to override if the wrap mode isn't already automatic or
* clamp_to_edge.
*/
wrap_s = cogl_pipeline_get_layer_wrap_mode_s (pipeline, layer_index);
if (wrap_s != COGL_PIPELINE_WRAP_MODE_CLAMP_TO_EDGE &&
wrap_s != COGL_PIPELINE_WRAP_MODE_AUTOMATIC)
{
if (!state->override_pipeline)
state->override_pipeline = cogl_pipeline_copy (pipeline);
cogl_pipeline_set_layer_wrap_mode_s (state->override_pipeline,
layer_index, clamp_to_edge);
}
wrap_t = cogl_pipeline_get_layer_wrap_mode_t (pipeline, layer_index);
if (wrap_t != COGL_PIPELINE_WRAP_MODE_CLAMP_TO_EDGE &&
wrap_t != COGL_PIPELINE_WRAP_MODE_AUTOMATIC)
{
if (!state->override_pipeline)
state->override_pipeline = cogl_pipeline_copy (pipeline);
cogl_pipeline_set_layer_wrap_mode_t (state->override_pipeline,
layer_index, clamp_to_edge);
}
return FALSE;
}
/* This path doesn't currently support multitexturing but is used for
* CoglTextures that don't support repeating using the GPU so we need to
* manually emit extra geometry to fake the repeating. This includes:
*
* - CoglTexture2DSliced: when made of > 1 slice or if the users given
* texture coordinates require repeating,
* - CoglTexture2DAtlas: if the users given texture coordinates require
* repeating,
* - CoglTextureRectangle: if the users given texture coordinates require
* repeating,
* - CoglTexturePixmap: if the users given texture coordinates require
* repeating
*/
/* TODO: support multitexturing */
static void
_cogl_texture_quad_multiple_primitives (CoglFramebuffer *framebuffer,
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
CoglPipeline *pipeline,
CoglTexture *texture,
int layer_index,
const float *position,
float tx_1,
float ty_1,
float tx_2,
float ty_2)
{
TextureSlicedQuadState state;
CoglBool tex_virtual_flipped_x;
CoglBool tex_virtual_flipped_y;
CoglBool quad_flipped_x;
CoglBool quad_flipped_y;
ValidateFirstLayerState validate_first_layer_state;
CoglPipelineWrapMode wrap_s, wrap_t;
wrap_s = cogl_pipeline_get_layer_wrap_mode_s (pipeline, layer_index);
wrap_t = cogl_pipeline_get_layer_wrap_mode_t (pipeline, layer_index);
validate_first_layer_state.override_pipeline = NULL;
cogl_pipeline_foreach_layer (pipeline,
validate_first_layer_cb,
&validate_first_layer_state);
state.framebuffer = framebuffer;
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
state.main_texture = texture;
if (validate_first_layer_state.override_pipeline)
state.pipeline = validate_first_layer_state.override_pipeline;
else
state.pipeline = pipeline;
/* Get together the data we need to transform the virtual texture
* coordinates of each slice into quad coordinates...
*
* NB: We need to consider that the quad coordinates and the texture
* coordinates may be inverted along the x or y axis, and must preserve the
* inversions when we emit the final geometry.
*/
#define X0 0
#define Y0 1
#define X1 2
#define Y1 3
tex_virtual_flipped_x = (tx_1 > tx_2) ? TRUE : FALSE;
tex_virtual_flipped_y = (ty_1 > ty_2) ? TRUE : FALSE;
state.tex_virtual_origin_x = tex_virtual_flipped_x ? tx_2 : tx_1;
state.tex_virtual_origin_y = tex_virtual_flipped_y ? ty_2 : ty_1;
quad_flipped_x = (position[X0] > position[X1]) ? TRUE : FALSE;
quad_flipped_y = (position[Y0] > position[Y1]) ? TRUE : FALSE;
state.quad_origin_x = quad_flipped_x ? position[X1] : position[X0];
state.quad_origin_y = quad_flipped_y ? position[Y1] : position[Y0];
/* flatten the two forms of coordinate inversion into one... */
state.flipped_x = tex_virtual_flipped_x ^ quad_flipped_x;
state.flipped_y = tex_virtual_flipped_y ^ quad_flipped_y;
/* We use the _len_AXIS naming here instead of _width and _height because
* log_quad_slice_cb uses a macro with symbol concatenation to handle both
* axis, so this is more convenient... */
state.quad_len_x = fabs (position[X1] - position[X0]);
state.quad_len_y = fabs (position[Y1] - position[Y0]);
#undef X0
#undef Y0
#undef X1
#undef Y1
state.v_to_q_scale_x = fabs (state.quad_len_x / (tx_2 - tx_1));
state.v_to_q_scale_y = fabs (state.quad_len_y / (ty_2 - ty_1));
/* For backwards compatablity the default wrap mode for cogl_rectangle() is
* _REPEAT... */
if (wrap_s == COGL_PIPELINE_WRAP_MODE_AUTOMATIC)
wrap_s = COGL_PIPELINE_WRAP_MODE_REPEAT;
if (wrap_t == COGL_PIPELINE_WRAP_MODE_AUTOMATIC)
wrap_t = COGL_PIPELINE_WRAP_MODE_REPEAT;
cogl_meta_texture_foreach_in_region (COGL_META_TEXTURE (texture),
tx_1, ty_1, tx_2, ty_2,
wrap_s,
wrap_t,
log_quad_sub_textures_cb,
&state);
if (validate_first_layer_state.override_pipeline)
cogl_object_unref (validate_first_layer_state.override_pipeline);
}
typedef struct _ValidateTexCoordsState
{
int i;
int n_layers;
const float *user_tex_coords;
int user_tex_coords_len;
float *final_tex_coords;
CoglPipeline *override_pipeline;
CoglBool needs_multiple_primitives;
} ValidateTexCoordsState;
/*
* Validate the texture coordinates for this rectangle.
*/
static CoglBool
validate_tex_coords_cb (CoglPipeline *pipeline,
int layer_index,
void *user_data)
{
ValidateTexCoordsState *state = user_data;
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
CoglTexture *texture;
const float *in_tex_coords;
float *out_tex_coords;
float default_tex_coords[4] = {0.0, 0.0, 1.0, 1.0};
CoglTransformResult transform_result;
state->i++;
/* FIXME: we should be able to avoid this copying when no
* transform is required by the texture backend and the user
* has supplied enough coordinates for all the layers.
*/
/* If the user didn't supply texture coordinates for this layer
then use the default coords */
if (state->i >= state->user_tex_coords_len / 4)
in_tex_coords = default_tex_coords;
else
in_tex_coords = &state->user_tex_coords[state->i * 4];
out_tex_coords = &state->final_tex_coords[state->i * 4];
memcpy (out_tex_coords, in_tex_coords, sizeof (float) * 4);
texture = cogl_pipeline_get_layer_texture (pipeline, layer_index);
/* NB: NULL textures are handled by _cogl_pipeline_flush_gl_state */
if (!texture)
return TRUE;
/* Convert the texture coordinates to GL.
*/
transform_result =
_cogl_texture_transform_quad_coords_to_gl (texture,
out_tex_coords);
/* If the texture has waste or we are using GL_TEXTURE_RECT we
* can't handle texture repeating so we can't use the layer if
* repeating is required.
*
* NB: We already know that no texture matrix is being used if the
* texture doesn't support hardware repeat.
*/
if (transform_result == COGL_TRANSFORM_SOFTWARE_REPEAT)
{
if (state->i == 0)
{
if (state->n_layers > 1)
{
static CoglBool warning_seen = FALSE;
if (!warning_seen)
g_warning ("Skipping layers 1..n of your material since "
"the first layer doesn't support hardware "
"repeat (e.g. because of waste or use of "
"GL_TEXTURE_RECTANGLE_ARB) and you supplied "
"texture coordinates outside the range [0,1]."
"Falling back to software repeat assuming "
"layer 0 is the most important one keep");
warning_seen = TRUE;
}
if (state->override_pipeline)
cogl_object_unref (state->override_pipeline);
state->needs_multiple_primitives = TRUE;
return FALSE;
}
else
{
static CoglBool warning_seen = FALSE;
if (!warning_seen)
g_warning ("Skipping layer %d of your material "
"since you have supplied texture coords "
"outside the range [0,1] but the texture "
"doesn't support hardware repeat (e.g. "
"because of waste or use of "
"GL_TEXTURE_RECTANGLE_ARB). This isn't "
"supported with multi-texturing.", state->i);
warning_seen = TRUE;
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
cogl_pipeline_set_layer_texture (pipeline, layer_index, NULL);
}
}
/* By default WRAP_MODE_AUTOMATIC becomes to CLAMP_TO_EDGE. If
the texture coordinates need repeating then we'll override
this to GL_REPEAT. Otherwise we'll leave it at CLAMP_TO_EDGE
so that it won't blend in pixels from the opposite side when
the full texture is drawn with GL_LINEAR filter mode */
if (transform_result == COGL_TRANSFORM_HARDWARE_REPEAT)
{
if (cogl_pipeline_get_layer_wrap_mode_s (pipeline, layer_index) ==
COGL_PIPELINE_WRAP_MODE_AUTOMATIC)
{
if (!state->override_pipeline)
state->override_pipeline = cogl_pipeline_copy (pipeline);
cogl_pipeline_set_layer_wrap_mode_s (state->override_pipeline,
layer_index,
COGL_PIPELINE_WRAP_MODE_REPEAT);
}
if (cogl_pipeline_get_layer_wrap_mode_t (pipeline, layer_index) ==
COGL_PIPELINE_WRAP_MODE_AUTOMATIC)
{
if (!state->override_pipeline)
state->override_pipeline = cogl_pipeline_copy (pipeline);
cogl_pipeline_set_layer_wrap_mode_t (state->override_pipeline,
layer_index,
COGL_PIPELINE_WRAP_MODE_REPEAT);
}
}
return TRUE;
}
/* This path supports multitexturing but only when each of the layers is
* handled with a single GL texture. Also if repeating is necessary then
* _cogl_texture_can_hardware_repeat() must return TRUE.
* This includes layers made from:
*
* - CoglTexture2DSliced: if only comprised of a single slice with optional
* waste, assuming the users given texture coordinates don't require
* repeating.
* - CoglTexture{1D,2D,3D}: always.
* - CoglTexture2DAtlas: assuming the users given texture coordinates don't
* require repeating.
* - CoglTextureRectangle: assuming the users given texture coordinates don't
* require repeating.
* - CoglTexturePixmap: assuming the users given texture coordinates don't
* require repeating.
*/
static CoglBool
_cogl_multitexture_quad_single_primitive (CoglFramebuffer *framebuffer,
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
CoglPipeline *pipeline,
const float *position,
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
const float *user_tex_coords,
int user_tex_coords_len)
{
int n_layers = cogl_pipeline_get_n_layers (pipeline);
ValidateTexCoordsState state;
float *final_tex_coords = alloca (sizeof (float) * 4 * n_layers);
state.i = -1;
state.n_layers = n_layers;
state.user_tex_coords = user_tex_coords;
state.user_tex_coords_len = user_tex_coords_len;
state.final_tex_coords = final_tex_coords;
state.override_pipeline = NULL;
state.needs_multiple_primitives = FALSE;
cogl-material: Add support for setting the wrap mode for a layer Previously, Cogl's texture coordinate system was effectively always GL_REPEAT so that if an application specifies coordinates outside the range 0→1 it would get repeated copies of the texture. It would however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates are in the range 0→1 so that in the common case that the whole texture is being drawn with linear filtering it will not blend in edge pixels from the opposite sides. This patch adds the option for applications to change the wrap mode per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge' and 'automatic'. The automatic map mode is the default and it implements the previous behaviour. The wrap mode can be changed for the s and t coordinates independently. I've tried to make the internals support setting the r coordinate but as we don't support 3D textures yet I haven't exposed any public API for it. The texture backends still have a set_wrap_mode virtual but this value is intended to be transitory and it will be changed whenever the material is flushed (although the backends are expected to cache it so that it won't use too many GL calls). In my understanding this value was always meant to be transitory and all primitives were meant to set the value before drawing. However there were comments suggesting that this is not the expected behaviour. In particular the vertex buffer drawing code never set a wrap mode so it would end up with whatever the texture was previously used for. These issues are now fixed because the material will always set the wrap modes. There is code to manually implement clamp-to-edge for textures that can't be hardware repeated. However this doesn't fully work because it relies on being able to draw the stretched parts using quads with the same values for tx1 and tx2. The texture iteration code doesn't support this so it breaks. This is a separate bug and it isn't trivially solved. When flushing a material there are now extra options to set wrap mode overrides. The overrides are an array of values for each layer that specifies an override for the s, t or r coordinates. The primitives use this to implement the automatic wrap mode. cogl_polygon also uses it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced textures. Although this code has been added it looks like the sliced trick has been broken for a while and I haven't attempted to fix it here. I've added a constant to represent the maximum number of layers that a material supports so that I can size the overrides array. I've set it to 32 because as far as I can tell we have that limit imposed anyway because the other flush options use a guint32 to store a flag about each layer. The overrides array ends up adding 32 bytes to each flush options struct which may be a concern. http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-01 06:31:33 -04:00
cogl_pipeline_foreach_layer (pipeline,
validate_tex_coords_cb,
&state);
if (state.needs_multiple_primitives)
return FALSE;
if (state.override_pipeline)
pipeline = state.override_pipeline;
_cogl_journal_log_quad (framebuffer->journal,
position,
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
pipeline,
n_layers,
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
NULL, /* no texture override */
final_tex_coords,
n_layers * 4);
if (state.override_pipeline)
cogl_object_unref (state.override_pipeline);
return TRUE;
}
typedef struct _ValidateLayerState
{
CoglContext *ctx;
int i;
int first_layer;
CoglPipeline *override_source;
CoglBool all_use_sliced_quad_fallback;
} ValidateLayerState;
static CoglBool
_cogl_rectangles_validate_layer_cb (CoglPipeline *pipeline,
int layer_index,
void *user_data)
{
ValidateLayerState *state = user_data;
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
CoglTexture *texture;
state->i++;
/* We need to ensure the mipmaps are ready before deciding
* anything else about the texture because the texture storage
* could completely change if it needs to be migrated out of the
* atlas and will affect how we validate the layer.
*
* FIXME: this needs to be generalized. There could be any
* number of things that might require a shuffling of the
* underlying texture storage. We could add two mechanisms to
* generalize this a bit...
*
* 1) add a _cogl_pipeline_layer_update_storage() function that
* would for instance consider if mipmapping is necessary and
* potentially migrate the texture from an atlas.
*
* 2) allow setting of transient primitive-flags on a pipeline
* that may affect the outcome of _update_storage(). One flag
* could indicate that we expect to sample beyond the bounds of
* the texture border.
*
* flags = COGL_PIPELINE_PRIMITIVE_FLAG_VALID_BORDERS;
* _cogl_pipeline_layer_assert_primitive_flags (layer, flags)
* _cogl_pipeline_layer_update_storage (layer)
* enqueue primitive in journal
*
* when the primitive is dequeued and drawn we should:
* _cogl_pipeline_flush_gl_state (pipeline)
* draw primitive
* _cogl_pipeline_unassert_primitive_flags (layer, flags);
*
* _cogl_pipeline_layer_update_storage should take into
* consideration all the asserted primitive requirements. (E.g.
* there could be multiple primitives in the journal - or in a
* renderlist in the future - that need mipmaps or that need
* valid contents beyond their borders (for cogl_polygon)
* meaning they can't work with textures in an atas, so
* _cogl_pipeline_layer_update_storage would pass on these
* requirements to the texture atlas backend which would make
* sure the referenced texture is migrated out of the atlas and
* mipmaps are generated.)
*/
_cogl_pipeline_pre_paint_for_layer (pipeline, layer_index);
texture = cogl_pipeline_get_layer_texture (pipeline, layer_index);
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
/* NULL textures are handled by
* _cogl_pipeline_flush_gl_state */
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
if (texture == NULL)
return TRUE;
if (state->i == 0)
state->first_layer = layer_index;
/* XXX:
* For now, if the first layer is sliced then all other layers are
* ignored since we currently don't support multi-texturing with
* sliced textures. If the first layer is not sliced then any other
* layers found to be sliced will be skipped. (with a warning)
*
* TODO: Add support for multi-texturing rectangles with sliced
* textures if no texture matrices are in use.
*/
if (cogl_texture_is_sliced (texture))
{
if (state->i == 0)
{
if (cogl_pipeline_get_n_layers (pipeline) > 1)
{
static CoglBool warning_seen = FALSE;
if (!state->override_source)
state->override_source = cogl_pipeline_copy (pipeline);
_cogl_pipeline_prune_to_n_layers (state->override_source, 1);
if (!warning_seen)
g_warning ("Skipping layers 1..n of your pipeline since "
"the first layer is sliced. We don't currently "
"support any multi-texturing with sliced "
"textures but assume layer 0 is the most "
"important to keep");
warning_seen = TRUE;
}
state->all_use_sliced_quad_fallback = TRUE;
return FALSE;
}
else
{
static CoglBool warning_seen = FALSE;
CoglTexture2D *tex_2d;
if (!warning_seen)
g_warning ("Skipping layer %d of your pipeline consisting of "
"a sliced texture (unsuported for multi texturing)",
state->i);
warning_seen = TRUE;
/* Note: currently only 2D textures can be sliced. */
tex_2d = state->ctx->default_gl_texture_2d_tex;
cogl_pipeline_set_layer_texture (pipeline, layer_index,
COGL_TEXTURE (tex_2d));
return TRUE;
}
}
#ifdef COGL_ENABLE_DEBUG
/* If the texture can't be repeated with the GPU (e.g. because it has
* waste or if using GL_TEXTURE_RECTANGLE_ARB) then if a texture matrix
* is also in use we don't know if the result will end up trying
* to texture from the waste area.
*
* Note: we check can_hardware_repeat() first since it's cheaper.
*
* Note: cases where the texture coordinates will require repeating
* will be caught by later validation.
*/
if (!_cogl_texture_can_hardware_repeat (texture) &&
_cogl_pipeline_layer_has_user_matrix (pipeline, layer_index))
{
static CoglBool warning_seen = FALSE;
if (!warning_seen)
g_warning ("layer %d of your pipeline uses a custom "
"texture matrix but because the texture doesn't "
"support hardware repeating you may see artefacts "
"due to sampling beyond the texture's bounds.",
state->i);
warning_seen = TRUE;
}
#endif
return TRUE;
}
void
_cogl_framebuffer_draw_multitextured_rectangles (
CoglFramebuffer *framebuffer,
CoglPipeline *pipeline,
CoglMultiTexturedRect *rects,
int n_rects,
CoglBool disable_legacy_state)
{
CoglContext *ctx = framebuffer->context;
CoglPipeline *original_pipeline;
ValidateLayerState state;
int i;
original_pipeline = pipeline;
/*
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
* Validate all the layers of the current source pipeline...
*/
state.ctx = ctx;
state.i = -1;
state.first_layer = 0;
state.override_source = NULL;
state.all_use_sliced_quad_fallback = FALSE;
cogl_pipeline_foreach_layer (pipeline,
_cogl_rectangles_validate_layer_cb,
&state);
if (state.override_source)
pipeline = state.override_source;
if (!disable_legacy_state)
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 07:17:09 -04:00
{
if (G_UNLIKELY (ctx->legacy_state_set) &&
_cogl_get_enable_legacy_state ())
{
/* If we haven't already made a pipeline copy */
if (pipeline == original_pipeline)
pipeline = cogl_pipeline_copy (pipeline);
_cogl_pipeline_apply_legacy_state (pipeline);
}
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 07:17:09 -04:00
}
/*
* Emit geometry for each of the rectangles...
*/
for (i = 0; i < n_rects; i++)
{
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
CoglTexture *texture;
const float default_tex_coords[4] = {0.0, 0.0, 1.0, 1.0};
const float *tex_coords;
if (!state.all_use_sliced_quad_fallback)
{
CoglBool success =
_cogl_multitexture_quad_single_primitive (framebuffer,
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
pipeline,
rects[i].position,
rects[i].tex_coords,
rects[i].tex_coords_len);
/* NB: If _cogl_multitexture_quad_single_primitive fails then it
* means the user tried to use texture repeat with a texture that
* can't be repeated by the GPU (e.g. due to waste or use of
* GL_TEXTURE_RECTANGLE_ARB) */
if (success)
continue;
}
/* If multitexturing failed or we are drawing with a sliced texture
* then we only support a single layer so we pluck out the texture
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
* from the first pipeline layer... */
texture = cogl_pipeline_get_layer_texture (pipeline, state.first_layer);
if (rects[i].tex_coords)
tex_coords = rects[i].tex_coords;
else
tex_coords = default_tex_coords;
cogl-material: Add support for setting the wrap mode for a layer Previously, Cogl's texture coordinate system was effectively always GL_REPEAT so that if an application specifies coordinates outside the range 0→1 it would get repeated copies of the texture. It would however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates are in the range 0→1 so that in the common case that the whole texture is being drawn with linear filtering it will not blend in edge pixels from the opposite sides. This patch adds the option for applications to change the wrap mode per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge' and 'automatic'. The automatic map mode is the default and it implements the previous behaviour. The wrap mode can be changed for the s and t coordinates independently. I've tried to make the internals support setting the r coordinate but as we don't support 3D textures yet I haven't exposed any public API for it. The texture backends still have a set_wrap_mode virtual but this value is intended to be transitory and it will be changed whenever the material is flushed (although the backends are expected to cache it so that it won't use too many GL calls). In my understanding this value was always meant to be transitory and all primitives were meant to set the value before drawing. However there were comments suggesting that this is not the expected behaviour. In particular the vertex buffer drawing code never set a wrap mode so it would end up with whatever the texture was previously used for. These issues are now fixed because the material will always set the wrap modes. There is code to manually implement clamp-to-edge for textures that can't be hardware repeated. However this doesn't fully work because it relies on being able to draw the stretched parts using quads with the same values for tx1 and tx2. The texture iteration code doesn't support this so it breaks. This is a separate bug and it isn't trivially solved. When flushing a material there are now extra options to set wrap mode overrides. The overrides are an array of values for each layer that specifies an override for the s, t or r coordinates. The primitives use this to implement the automatic wrap mode. cogl_polygon also uses it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced textures. Although this code has been added it looks like the sliced trick has been broken for a while and I haven't attempted to fix it here. I've added a constant to represent the maximum number of layers that a material supports so that I can size the overrides array. I've set it to 32 because as far as I can tell we have that limit imposed anyway because the other flush options use a guint32 to store a flag about each layer. The overrides array ends up adding 32 bytes to each flush options struct which may be a concern. http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-01 06:31:33 -04:00
COGL_NOTE (DRAW, "Drawing Tex Quad (Multi-Prim Mode)");
_cogl_texture_quad_multiple_primitives (framebuffer,
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
pipeline,
texture,
state.first_layer,
rects[i].position,
tex_coords[0],
tex_coords[1],
tex_coords[2],
tex_coords[3]);
}
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 07:17:09 -04:00
if (pipeline != original_pipeline)
cogl_object_unref (pipeline);
}
static void
_cogl_rectangles_with_multitexture_coords (
CoglMultiTexturedRect *rects,
int n_rects)
{
_cogl_framebuffer_draw_multitextured_rectangles (cogl_get_draw_framebuffer (),
cogl_get_source (),
rects,
n_rects,
FALSE);
}
void
cogl_rectangles (const float *verts,
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
unsigned int n_rects)
{
CoglMultiTexturedRect *rects;
int i;
/* XXX: All the cogl_rectangle* APIs normalize their input into an array of
* CoglMultiTexturedRect rectangles and pass these on to our work horse;
* _cogl_rectangles_with_multitexture_coords.
*/
rects = g_alloca (n_rects * sizeof (CoglMultiTexturedRect));
for (i = 0; i < n_rects; i++)
{
rects[i].position = &verts[i * 4];
rects[i].tex_coords = NULL;
rects[i].tex_coords_len = 0;
}
_cogl_rectangles_with_multitexture_coords (rects, n_rects);
}
void
cogl_rectangles_with_texture_coords (const float *verts,
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
unsigned int n_rects)
{
CoglMultiTexturedRect *rects;
int i;
/* XXX: All the cogl_rectangle* APIs normalize their input into an array of
* CoglMultiTexturedRect rectangles and pass these on to our work horse;
* _cogl_rectangles_with_multitexture_coords.
*/
rects = g_alloca (n_rects * sizeof (CoglMultiTexturedRect));
for (i = 0; i < n_rects; i++)
{
rects[i].position = &verts[i * 8];
rects[i].tex_coords = &verts[i * 8 + 4];
rects[i].tex_coords_len = 4;
}
_cogl_rectangles_with_multitexture_coords (rects, n_rects);
}
void
cogl_rectangle_with_texture_coords (float x_1,
float y_1,
float x_2,
float y_2,
float tx_1,
float ty_1,
float tx_2,
float ty_2)
{
const float position[4] = {x_1, y_1, x_2, y_2};
const float tex_coords[4] = {tx_1, ty_1, tx_2, ty_2};
CoglMultiTexturedRect rect;
/* XXX: All the cogl_rectangle* APIs normalize their input into an array of
* CoglMultiTexturedRect rectangles and pass these on to our work horse;
* _cogl_rectangles_with_multitexture_coords.
*/
rect.position = position;
rect.tex_coords = tex_coords;
rect.tex_coords_len = 4;
_cogl_rectangles_with_multitexture_coords (&rect, 1);
}
void
cogl_rectangle_with_multitexture_coords (float x_1,
float y_1,
float x_2,
float y_2,
const float *user_tex_coords,
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
int user_tex_coords_len)
{
const float position[4] = {x_1, y_1, x_2, y_2};
CoglMultiTexturedRect rect;
/* XXX: All the cogl_rectangle* APIs normalize their input into an array of
* CoglMultiTexturedRect rectangles and pass these on to our work horse;
* _cogl_rectangles_with_multitexture_coords.
*/
rect.position = position;
rect.tex_coords = user_tex_coords;
rect.tex_coords_len = user_tex_coords_len;
_cogl_rectangles_with_multitexture_coords (&rect, 1);
}
void
cogl_rectangle (float x_1,
float y_1,
float x_2,
float y_2)
{
const float position[4] = {x_1, y_1, x_2, y_2};
CoglMultiTexturedRect rect;
/* XXX: All the cogl_rectangle* APIs normalize their input into an array of
* CoglMultiTexturedRect rectangles and pass these on to our work horse;
* _cogl_rectangles_with_multitexture_coords.
*/
rect.position = position;
rect.tex_coords = NULL;
rect.tex_coords_len = 0;
_cogl_rectangles_with_multitexture_coords (&rect, 1);
}
void
_cogl_rectangle_immediate (CoglFramebuffer *framebuffer,
CoglPipeline *pipeline,
float x_1,
float y_1,
float x_2,
float y_2)
{
/* Draw a rectangle using the vertex array API to avoid going
through the journal. This should only be used in cases where the
code might be called while the journal is already being flushed
such as when flushing the clip state */
CoglContext *ctx = framebuffer->context;
float vertices[8] =
{
x_1, y_1,
x_1, y_2,
x_2, y_1,
x_2, y_2
};
CoglAttributeBuffer *attribute_buffer;
CoglAttribute *attributes[1];
attribute_buffer =
cogl_attribute_buffer_new (ctx, sizeof (vertices), vertices);
attributes[0] = cogl_attribute_new (attribute_buffer,
"cogl_position_in",
sizeof (float) * 2, /* stride */
0, /* offset */
2, /* n_components */
COGL_ATTRIBUTE_TYPE_FLOAT);
_cogl_framebuffer_draw_attributes (framebuffer,
pipeline,
COGL_VERTICES_MODE_TRIANGLE_STRIP,
0, /* first_index */
4, /* n_vertices */
attributes,
1,
COGL_DRAW_SKIP_JOURNAL_FLUSH |
COGL_DRAW_SKIP_PIPELINE_VALIDATION |
COGL_DRAW_SKIP_FRAMEBUFFER_FLUSH |
COGL_DRAW_SKIP_LEGACY_STATE);
cogl_object_unref (attributes[0]);
cogl_object_unref (attribute_buffer);
}
typedef struct _AppendTexCoordsState
{
const CoglTextureVertex *vertices_in;
int vertex;
int layer;
float *vertices_out;
} AppendTexCoordsState;
static CoglBool
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
append_tex_coord_attributes_cb (CoglPipeline *pipeline,
int layer_index,
void *user_data)
{
AppendTexCoordsState *state = user_data;
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
CoglTexture *texture;
float tx, ty;
float *t;
tx = state->vertices_in[state->vertex].tx;
ty = state->vertices_in[state->vertex].ty;
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
/* NULL textures will be handled in
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
* _cogl_pipeline_flush_layers_gl_state but there is no need to worry
* about scaling texture coordinates in this case */
texture = cogl_pipeline_get_layer_texture (pipeline, layer_index);
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
if (texture != NULL)
_cogl_texture_transform_coords_to_gl (texture, &tx, &ty);
/* NB: [X,Y,Z,TX,TY...,R,G,B,A,...] */
t = state->vertices_out + 3 + 2 * state->layer;
t[0] = tx;
t[1] = ty;
state->layer++;
return TRUE;
}
typedef struct _ValidateState
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
CoglPipeline *original_pipeline;
CoglPipeline *pipeline;
} ValidateState;
static CoglBool
_cogl_polygon_validate_layer_cb (CoglPipeline *pipeline,
int layer_index,
void *user_data)
{
ValidateState *state = user_data;
cogl-material: Add support for setting the wrap mode for a layer Previously, Cogl's texture coordinate system was effectively always GL_REPEAT so that if an application specifies coordinates outside the range 0→1 it would get repeated copies of the texture. It would however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates are in the range 0→1 so that in the common case that the whole texture is being drawn with linear filtering it will not blend in edge pixels from the opposite sides. This patch adds the option for applications to change the wrap mode per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge' and 'automatic'. The automatic map mode is the default and it implements the previous behaviour. The wrap mode can be changed for the s and t coordinates independently. I've tried to make the internals support setting the r coordinate but as we don't support 3D textures yet I haven't exposed any public API for it. The texture backends still have a set_wrap_mode virtual but this value is intended to be transitory and it will be changed whenever the material is flushed (although the backends are expected to cache it so that it won't use too many GL calls). In my understanding this value was always meant to be transitory and all primitives were meant to set the value before drawing. However there were comments suggesting that this is not the expected behaviour. In particular the vertex buffer drawing code never set a wrap mode so it would end up with whatever the texture was previously used for. These issues are now fixed because the material will always set the wrap modes. There is code to manually implement clamp-to-edge for textures that can't be hardware repeated. However this doesn't fully work because it relies on being able to draw the stretched parts using quads with the same values for tx1 and tx2. The texture iteration code doesn't support this so it breaks. This is a separate bug and it isn't trivially solved. When flushing a material there are now extra options to set wrap mode overrides. The overrides are an array of values for each layer that specifies an override for the s, t or r coordinates. The primitives use this to implement the automatic wrap mode. cogl_polygon also uses it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced textures. Although this code has been added it looks like the sliced trick has been broken for a while and I haven't attempted to fix it here. I've added a constant to represent the maximum number of layers that a material supports so that I can size the overrides array. I've set it to 32 because as far as I can tell we have that limit imposed anyway because the other flush options use a guint32 to store a flag about each layer. The overrides array ends up adding 32 bytes to each flush options struct which may be a concern. http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-01 06:31:33 -04:00
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
/* By default COGL_PIPELINE_WRAP_MODE_AUTOMATIC becomes
* GL_CLAMP_TO_EDGE but we want the polygon API to use GL_REPEAT to
* maintain compatibility with previous releases
*/
cogl-material: Add support for setting the wrap mode for a layer Previously, Cogl's texture coordinate system was effectively always GL_REPEAT so that if an application specifies coordinates outside the range 0→1 it would get repeated copies of the texture. It would however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates are in the range 0→1 so that in the common case that the whole texture is being drawn with linear filtering it will not blend in edge pixels from the opposite sides. This patch adds the option for applications to change the wrap mode per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge' and 'automatic'. The automatic map mode is the default and it implements the previous behaviour. The wrap mode can be changed for the s and t coordinates independently. I've tried to make the internals support setting the r coordinate but as we don't support 3D textures yet I haven't exposed any public API for it. The texture backends still have a set_wrap_mode virtual but this value is intended to be transitory and it will be changed whenever the material is flushed (although the backends are expected to cache it so that it won't use too many GL calls). In my understanding this value was always meant to be transitory and all primitives were meant to set the value before drawing. However there were comments suggesting that this is not the expected behaviour. In particular the vertex buffer drawing code never set a wrap mode so it would end up with whatever the texture was previously used for. These issues are now fixed because the material will always set the wrap modes. There is code to manually implement clamp-to-edge for textures that can't be hardware repeated. However this doesn't fully work because it relies on being able to draw the stretched parts using quads with the same values for tx1 and tx2. The texture iteration code doesn't support this so it breaks. This is a separate bug and it isn't trivially solved. When flushing a material there are now extra options to set wrap mode overrides. The overrides are an array of values for each layer that specifies an override for the s, t or r coordinates. The primitives use this to implement the automatic wrap mode. cogl_polygon also uses it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced textures. Although this code has been added it looks like the sliced trick has been broken for a while and I haven't attempted to fix it here. I've added a constant to represent the maximum number of layers that a material supports so that I can size the overrides array. I've set it to 32 because as far as I can tell we have that limit imposed anyway because the other flush options use a guint32 to store a flag about each layer. The overrides array ends up adding 32 bytes to each flush options struct which may be a concern. http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-01 06:31:33 -04:00
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
if (cogl_pipeline_get_layer_wrap_mode_s (pipeline, layer_index) ==
COGL_PIPELINE_WRAP_MODE_AUTOMATIC)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
if (state->original_pipeline == state->pipeline)
state->pipeline = cogl_pipeline_copy (pipeline);
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
cogl_pipeline_set_layer_wrap_mode_s (state->pipeline, layer_index,
COGL_PIPELINE_WRAP_MODE_REPEAT);
}
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
if (cogl_pipeline_get_layer_wrap_mode_t (pipeline, layer_index) ==
COGL_PIPELINE_WRAP_MODE_AUTOMATIC)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
if (state->original_pipeline == state->pipeline)
state->pipeline = cogl_pipeline_copy (pipeline);
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
cogl_pipeline_set_layer_wrap_mode_t (state->pipeline, layer_index,
COGL_PIPELINE_WRAP_MODE_REPEAT);
}
return TRUE;
}
void
cogl_polygon (const CoglTextureVertex *vertices,
unsigned int n_vertices,
CoglBool use_color)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
CoglPipeline *pipeline;
ValidateState validate_state;
int n_layers;
int n_attributes;
CoglAttribute **attributes;
int i;
unsigned int stride;
size_t stride_bytes;
CoglAttributeBuffer *attribute_buffer;
float *v;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
pipeline = cogl_get_source ();
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
validate_state.original_pipeline = pipeline;
validate_state.pipeline = pipeline;
cogl_pipeline_foreach_layer (pipeline,
_cogl_polygon_validate_layer_cb,
&validate_state);
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
pipeline = validate_state.pipeline;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
n_layers = cogl_pipeline_get_n_layers (pipeline);
n_attributes = 1 + n_layers + (use_color ? 1 : 0);
attributes = g_alloca (sizeof (CoglAttribute *) * n_attributes);
/* Our data is arranged like:
* [X, Y, Z, TX0, TY0, TX1, TY1..., R, G, B, A,...] */
stride = 3 + (2 * n_layers) + (use_color ? 1 : 0);
stride_bytes = stride * sizeof (float);
/* Make sure there is enough space in the global vertex array. This
* is used so we can render the polygon with a single call to OpenGL
* but still support any number of vertices */
g_array_set_size (ctx->polygon_vertices, n_vertices * stride);
attribute_buffer =
cogl_attribute_buffer_new (ctx, n_vertices * stride_bytes, NULL);
attributes[0] = cogl_attribute_new (attribute_buffer,
"cogl_position_in",
stride_bytes,
0,
3,
COGL_ATTRIBUTE_TYPE_FLOAT);
for (i = 0; i < n_layers; i++)
{
static const char *names[] = {
"cogl_tex_coord0_in",
"cogl_tex_coord1_in",
"cogl_tex_coord2_in",
"cogl_tex_coord3_in",
"cogl_tex_coord4_in",
"cogl_tex_coord5_in",
"cogl_tex_coord6_in",
"cogl_tex_coord7_in"
};
char *allocated_name = NULL;
const char *name;
if (i < 8)
name = names[i];
else
name = allocated_name = g_strdup_printf ("cogl_tex_coord%d_in", i);
attributes[i + 1] = cogl_attribute_new (attribute_buffer,
name,
stride_bytes,
/* NB: [X,Y,Z,TX,TY...,R,G,B,A,...] */
12 + 8 * i,
2,
COGL_ATTRIBUTE_TYPE_FLOAT);
g_free (allocated_name);
}
if (use_color)
{
attributes[n_attributes - 1] =
cogl_attribute_new (attribute_buffer,
"cogl_color_in",
stride_bytes,
/* NB: [X,Y,Z,TX,TY...,R,G,B,A,...] */
12 + 8 * n_layers,
4,
COGL_ATTRIBUTE_TYPE_UNSIGNED_BYTE);
}
/* Convert the vertices into an array of float vertex attributes */
v = (float *)ctx->polygon_vertices->data;
for (i = 0; i < n_vertices; i++)
{
AppendTexCoordsState append_tex_coords_state;
uint8_t *c;
/* NB: [X,Y,Z,TX,TY...,R,G,B,A,...] */
v[0] = vertices[i].x;
v[1] = vertices[i].y;
v[2] = vertices[i].z;
append_tex_coords_state.vertices_in = vertices;
append_tex_coords_state.vertex = i;
append_tex_coords_state.layer = 0;
append_tex_coords_state.vertices_out = v;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
cogl_pipeline_foreach_layer (pipeline,
append_tex_coord_attributes_cb,
&append_tex_coords_state);
if (use_color)
{
/* NB: [X,Y,Z,TX,TY...,R,G,B,A,...] */
c = (uint8_t *) (v + 3 + 2 * n_layers);
c[0] = cogl_color_get_red_byte (&vertices[i].color);
c[1] = cogl_color_get_green_byte (&vertices[i].color);
c[2] = cogl_color_get_blue_byte (&vertices[i].color);
c[3] = cogl_color_get_alpha_byte (&vertices[i].color);
}
v += stride;
}
v = (float *)ctx->polygon_vertices->data;
cogl_buffer_set_data (COGL_BUFFER (attribute_buffer),
0,
v,
ctx->polygon_vertices->len * sizeof (float));
/* XXX: although this may seem redundant, we need to do this since
* cogl_polygon() can be used with legacy state and its the source stack
* which track whether legacy state is enabled.
*
* (We only have a CoglDrawFlag to disable legacy state not one
* to enable it) */
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
cogl_push_source (pipeline);
_cogl_framebuffer_draw_attributes (cogl_get_draw_framebuffer (),
pipeline,
COGL_VERTICES_MODE_TRIANGLE_FAN,
0, n_vertices,
attributes,
n_attributes,
0 /* no draw flags */);
cogl_pop_source ();
if (pipeline != validate_state.original_pipeline)
cogl_object_unref (pipeline);
cogl_object_unref (attribute_buffer);
for (i = 0; i < n_attributes; i++)
cogl_object_unref (attributes[i]);
}