brl/mutter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
812aba31e7
mutter/cogl/cogl-blit.c

439 lines
14 KiB
C
Raw Normal View History

cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
/*
* Cogl
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-22 01:28:54 +00:00
* A Low Level GPU Graphics and Utilities API
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
*
* Copyright (C) 2011 Intel Corporation.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-22 01:28:54 +00:00
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-22 01:28:54 +00:00
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-22 01:28:54 +00:00
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
*
* Authors:
* Neil Roberts <neil@linux.intel.com>
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <string.h>
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
#include "cogl-util.h"
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
#include "cogl-blit.h"
cogl: rename cogl-context.h cogl-context-private.h Since we plan to add public cogl_context_* API we need to rename the current cogl-context.h which contains private member details.
2010-11-04 22:25:52 +00:00
#include "cogl-context-private.h"
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
#include "cogl-framebuffer-private.h"
blit: avoid using _COGL_GET_CONTEXT As part of an on-going effort to avoid depending on a global Cogl context cogl-blit.c now finds the context by looking at data->src_text->context instead of using the _COGL_GET_CONTEXT macro. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 3f2c99150494efc04487d0dbd17980bac20e4485)
2012-09-18 10:59:21 +00:00
#include "cogl-texture-private.h"
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
#include "cogl-texture-2d-private.h"
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 11:17:09 +00:00
#include "cogl-private.h"
Move all types/prototypes from cogl.h -> cogl[1]-context.h So we can get to the point where cogl.h is merely an aggregation of header includes for the 1.x api this moves all the function prototypes and type definitions into a cogl-context.h and a new cogl1-context.h. Ideally no code internally should ever need to include cogl.h as it just represents the public facing header for accessing the 1.x api which should only be used by Clutter. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-17 21:46:39 +00:00
#include "cogl1-context.h"
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
static const CoglBlitMode *_cogl_blit_default_mode = NULL;
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
static CoglBool
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
_cogl_blit_texture_render_begin (CoglBlitData *data)
{
blit: avoid using _COGL_GET_CONTEXT As part of an on-going effort to avoid depending on a global Cogl context cogl-blit.c now finds the context by looking at data->src_text->context instead of using the _COGL_GET_CONTEXT macro. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 3f2c99150494efc04487d0dbd17980bac20e4485)
2012-09-18 10:59:21 +00:00
CoglContext *ctx = data->src_tex->context;
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
CoglOffscreen *offscreen;
CoglFramebuffer *fb;
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
CoglPipeline *pipeline;
unsigned int dst_width, dst_height;
Allow lazy texture storage allocation Consistent with how we lazily allocate framebuffers this patch allows us to instantiate textures but still specify constraints and requirements before allocating storage so that we can be sure to allocate the most appropriate/efficient storage. This adds a cogl_texture_allocate() function that is analogous to cogl_framebuffer_allocate() which can optionally be called to explicitly allocate storage and catch any errors. If this function isn't used explicitly then Cogl will implicitly ensure textures are allocated before the storage is needed. It is generally recommended to rely on lazy storage allocation or at least perform explicit allocation as late as possible so Cogl can be fully informed about the best way to allocate storage. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 1fa7c0f10a8a03043e3c75cb079a49625df098b7) Note: This reverts the cogl_texture_rectangle_new_with_size API change that dropped the CoglError argument and keeps the semantics of allocating the texture immediately. This is because Mutter currently uses this API so we will probably look at updating this later once we have a corresponding Mutter patch prepared. The other API changes were kept since they only affected experimental api.
2012-11-22 23:01:08 +00:00
CoglError *ignore_error = NULL;
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
offscreen: rename _new_to_texture to _new_with_texture This renames cogl_offscreen_new_to_texture to cogl_offscreen_new_with_texture. The intention is to then cherry-pick this back to the cogl-1.16 branch so we can maintain a parallel cogl_offscreen_new_to_texture() function which keeps the synchronous allocation semantics that some clutter applications are currently relying on. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ecc6d2f64481626992b2fe6cdfa7b999270b28f5) Note: Since we can't break the 1.x api on this branch this keeps a thin shim around cogl_offscreen_new_with_texture to implement cogl_offscreen_new_to_texture with its synchronous allocation semantics.
2013-08-16 21:43:19 +00:00
offscreen = _cogl_offscreen_new_with_texture_full
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
(data->dst_tex, COGL_OFFSCREEN_DISABLE_DEPTH_AND_STENCIL, 0 /* level */);
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
fb = COGL_FRAMEBUFFER (offscreen);
Allow lazy texture storage allocation Consistent with how we lazily allocate framebuffers this patch allows us to instantiate textures but still specify constraints and requirements before allocating storage so that we can be sure to allocate the most appropriate/efficient storage. This adds a cogl_texture_allocate() function that is analogous to cogl_framebuffer_allocate() which can optionally be called to explicitly allocate storage and catch any errors. If this function isn't used explicitly then Cogl will implicitly ensure textures are allocated before the storage is needed. It is generally recommended to rely on lazy storage allocation or at least perform explicit allocation as late as possible so Cogl can be fully informed about the best way to allocate storage. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 1fa7c0f10a8a03043e3c75cb079a49625df098b7) Note: This reverts the cogl_texture_rectangle_new_with_size API change that dropped the CoglError argument and keeps the semantics of allocating the texture immediately. This is because Mutter currently uses this API so we will probably look at updating this later once we have a corresponding Mutter patch prepared. The other API changes were kept since they only affected experimental api.
2012-11-22 23:01:08 +00:00
if (!cogl_framebuffer_allocate (fb, &ignore_error))
When internally using an FBO, check for allocation errors Both the cogl_texture_get_data and _cogl_blit_begin implementations will internally try to create an FBO for a texture and have fallbacks if the FBO fails. However neither of them were catching errors when allocating the framebuffer so the fallback wouldn't work properly. This patch just adds an explicit call to cogl_framebuffer_allocate for these uses and causes it to use the next fallback if it fails. Based on a patch by Adel Gadllah. https://bugzilla.gnome.org/show_bug.cgi?id=669368 Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-06 12:23:39 +00:00
{
Allow lazy texture storage allocation Consistent with how we lazily allocate framebuffers this patch allows us to instantiate textures but still specify constraints and requirements before allocating storage so that we can be sure to allocate the most appropriate/efficient storage. This adds a cogl_texture_allocate() function that is analogous to cogl_framebuffer_allocate() which can optionally be called to explicitly allocate storage and catch any errors. If this function isn't used explicitly then Cogl will implicitly ensure textures are allocated before the storage is needed. It is generally recommended to rely on lazy storage allocation or at least perform explicit allocation as late as possible so Cogl can be fully informed about the best way to allocate storage. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 1fa7c0f10a8a03043e3c75cb079a49625df098b7) Note: This reverts the cogl_texture_rectangle_new_with_size API change that dropped the CoglError argument and keeps the semantics of allocating the texture immediately. This is because Mutter currently uses this API so we will probably look at updating this later once we have a corresponding Mutter patch prepared. The other API changes were kept since they only affected experimental api.
2012-11-22 23:01:08 +00:00
cogl_error_free (ignore_error);
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
cogl_object_unref (fb);
When internally using an FBO, check for allocation errors Both the cogl_texture_get_data and _cogl_blit_begin implementations will internally try to create an FBO for a texture and have fallbacks if the FBO fails. However neither of them were catching errors when allocating the framebuffer so the fallback wouldn't work properly. This patch just adds an explicit call to cogl_framebuffer_allocate for these uses and causes it to use the next fallback if it fails. Based on a patch by Adel Gadllah. https://bugzilla.gnome.org/show_bug.cgi?id=669368 Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-06 12:23:39 +00:00
return FALSE;
}
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
data->dest_fb = fb;
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
dst_width = cogl_texture_get_width (data->dst_tex);
dst_height = cogl_texture_get_height (data->dst_tex);
/* Set up an orthographic projection so we can use pixel
coordinates to render to the texture */
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
cogl_framebuffer_orthographic (fb,
0, 0, dst_width, dst_height,
-1 /* near */, 1 /* far */);
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
/* We cache a pipeline used for migrating on to the context so
that it doesn't have to continuously regenerate a shader
program */
if (ctx->blit_texture_pipeline == NULL)
{
Adds a context arg to cogl_pipeline_new() As we move towards Cogl 2.0 we are aiming to remove the need for a default global CoglContext and so everything should be explicitly related to a context somehow. CoglPipelines are top level objects and so this patch adds a context argument to cogl_pipeline_new(). Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-18 16:03:10 +00:00
ctx->blit_texture_pipeline = cogl_pipeline_new (ctx);
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
cogl_pipeline_set_layer_filters (ctx->blit_texture_pipeline, 0,
COGL_PIPELINE_FILTER_NEAREST,
COGL_PIPELINE_FILTER_NEAREST);
cogl-blit: Disable blending when using texture render When using a pipeline and the journal to blit images between framebuffers, it should disable blending. Otherwise it will end up blending the source texture with uninitialised garbage in the destination texture.
2011-02-24 18:42:47 +00:00
/* Disable blending by just directly taking the contents of the
source texture */
cogl_pipeline_set_blend (ctx->blit_texture_pipeline,
"RGBA = ADD(SRC_COLOR, 0)",
NULL);
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
}
pipeline = ctx->blit_texture_pipeline;
cogl_pipeline_set_layer_texture (pipeline, 0, data->src_tex);
sync cogl-blit and cogl-texture with master This synchronizes parts of cogl-blit.c and cogl-texture.c with the master branch to help with cherry picking patches.
2013-01-18 19:32:24 +00:00
data->pipeline = pipeline;
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
return TRUE;
}
static void
_cogl_blit_texture_render_blit (CoglBlitData *data,
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
int src_x,
int src_y,
int dst_x,
int dst_y,
int width,
int height)
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
{
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
cogl_framebuffer_draw_textured_rectangle (data->dest_fb,
sync cogl-blit and cogl-texture with master This synchronizes parts of cogl-blit.c and cogl-texture.c with the master branch to help with cherry picking patches.
2013-01-18 19:32:24 +00:00
data->pipeline,
dst_x, dst_y,
dst_x + width,
dst_y + height,
src_x / (float) data->src_width,
src_y / (float) data->src_height,
(src_x + width) /
(float) data->src_width,
(src_y + height) /
(float) data->src_height);
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
}
static void
_cogl_blit_texture_render_end (CoglBlitData *data)
{
blit: avoid using _COGL_GET_CONTEXT As part of an on-going effort to avoid depending on a global Cogl context cogl-blit.c now finds the context by looking at data->src_text->context instead of using the _COGL_GET_CONTEXT macro. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 3f2c99150494efc04487d0dbd17980bac20e4485)
2012-09-18 10:59:21 +00:00
CoglContext *ctx = data->src_tex->context;
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
/* Attach the target texture to the texture render pipeline so that
we don't keep a reference to the source texture forever. This is
assuming that the destination texture will live for a long time
which is currently the case when cogl_blit_* is used from the
atlas code. It may be better in future to keep around a set of
dummy 1x1 textures for each texture target that we could bind
instead. This would also be useful when using a pipeline as a
hash table key such as for the ARBfp program cache. */
cogl_pipeline_set_layer_texture (ctx->blit_texture_pipeline, 0,
data->dst_tex);
sync cogl-blit and cogl-texture with master This synchronizes parts of cogl-blit.c and cogl-texture.c with the master branch to help with cherry picking patches.
2013-01-18 19:32:24 +00:00
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
cogl_object_unref (data->dest_fb);
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
static CoglBool
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
_cogl_blit_framebuffer_begin (CoglBlitData *data)
{
blit: avoid using _COGL_GET_CONTEXT As part of an on-going effort to avoid depending on a global Cogl context cogl-blit.c now finds the context by looking at data->src_text->context instead of using the _COGL_GET_CONTEXT macro. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 3f2c99150494efc04487d0dbd17980bac20e4485)
2012-09-18 10:59:21 +00:00
CoglContext *ctx = data->src_tex->context;
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
CoglOffscreen *dst_offscreen = NULL, *src_offscreen = NULL;
CoglFramebuffer *dst_fb, *src_fb;
Allow lazy texture storage allocation Consistent with how we lazily allocate framebuffers this patch allows us to instantiate textures but still specify constraints and requirements before allocating storage so that we can be sure to allocate the most appropriate/efficient storage. This adds a cogl_texture_allocate() function that is analogous to cogl_framebuffer_allocate() which can optionally be called to explicitly allocate storage and catch any errors. If this function isn't used explicitly then Cogl will implicitly ensure textures are allocated before the storage is needed. It is generally recommended to rely on lazy storage allocation or at least perform explicit allocation as late as possible so Cogl can be fully informed about the best way to allocate storage. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 1fa7c0f10a8a03043e3c75cb079a49625df098b7) Note: This reverts the cogl_texture_rectangle_new_with_size API change that dropped the CoglError argument and keeps the semantics of allocating the texture immediately. This is because Mutter currently uses this API so we will probably look at updating this later once we have a corresponding Mutter patch prepared. The other API changes were kept since they only affected experimental api.
2012-11-22 23:01:08 +00:00
CoglError *ignore_error = NULL;
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
/* We can only blit between FBOs if both textures are the same
format and the blit framebuffer extension is supported */
texture: make cogl_texture_get_format api private CoglPixelFormat is not a good way of describing the internal format of a texture because it's too specific given that we don't actually have exact knowledge of the internal format used by the driver. This makes cogl_texture_get_format private and in the future we'll provide a better way of querying the channels and their precision. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ffde82981f22bd0185a7f33e1e6e1479f4c295b8) Note: Since we can't break API compatibility on the 1.x branch this adds a cogl/deprecated/cogl-texture-deprecated.c file with a cogl_texture_get_format() wrapper around the private api. This also moves the cogl_texture_get_rowstride() and cogl_texture_ref/unref() functions that were previously deprecated into cogl-texture-deprecated.c
2013-06-27 17:33:04 +00:00
if ((_cogl_texture_get_format (data->src_tex) & ~COGL_A_BIT) !=
(_cogl_texture_get_format (data->dst_tex) & ~COGL_A_BIT) ||
Use COGL_FLAGS_* for the context's private feature flags Previously the private feature flags were stored in an enum and we already had 31 flags. Adding the 32nd flag would presumably make it add -2³¹ as one of the values which might cause problems. To avoid this we'll just use an fixed-size array of longs and use indices for the enum values like we do for the public features. A slight complication with this is in the CoglDriverDescription where we were previously using a static intialised value to describe the set of features that the driver supports. We can't easily do this with the flags array so instead the features are stored in a fixed-size array of indices. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit d94cb984e3c93630f3c2e6e3be9d189672aa20f3) Conflicts: cogl/cogl-context-private.h cogl/cogl-context.c cogl/cogl-private.h cogl/cogl-renderer.c cogl/driver/gl/cogl-pipeline-opengl.c cogl/driver/gl/gl/cogl-driver-gl.c cogl/driver/gl/gl/cogl-pipeline-progend-fixed-arbfp.c cogl/driver/gl/gles/cogl-driver-gles.c cogl/driver/nop/cogl-driver-nop.c
2013-11-25 16:11:36 +00:00
!_cogl_has_private_feature (ctx, COGL_PRIVATE_FEATURE_OFFSCREEN_BLIT))
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
return FALSE;
offscreen: rename _new_to_texture to _new_with_texture This renames cogl_offscreen_new_to_texture to cogl_offscreen_new_with_texture. The intention is to then cherry-pick this back to the cogl-1.16 branch so we can maintain a parallel cogl_offscreen_new_to_texture() function which keeps the synchronous allocation semantics that some clutter applications are currently relying on. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ecc6d2f64481626992b2fe6cdfa7b999270b28f5) Note: Since we can't break the 1.x api on this branch this keeps a thin shim around cogl_offscreen_new_with_texture to implement cogl_offscreen_new_to_texture with its synchronous allocation semantics.
2013-08-16 21:43:19 +00:00
dst_offscreen = _cogl_offscreen_new_with_texture_full
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
(data->dst_tex, COGL_OFFSCREEN_DISABLE_DEPTH_AND_STENCIL, 0 /* level */);
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
dst_fb = COGL_FRAMEBUFFER (dst_offscreen);
Allow lazy texture storage allocation Consistent with how we lazily allocate framebuffers this patch allows us to instantiate textures but still specify constraints and requirements before allocating storage so that we can be sure to allocate the most appropriate/efficient storage. This adds a cogl_texture_allocate() function that is analogous to cogl_framebuffer_allocate() which can optionally be called to explicitly allocate storage and catch any errors. If this function isn't used explicitly then Cogl will implicitly ensure textures are allocated before the storage is needed. It is generally recommended to rely on lazy storage allocation or at least perform explicit allocation as late as possible so Cogl can be fully informed about the best way to allocate storage. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 1fa7c0f10a8a03043e3c75cb079a49625df098b7) Note: This reverts the cogl_texture_rectangle_new_with_size API change that dropped the CoglError argument and keeps the semantics of allocating the texture immediately. This is because Mutter currently uses this API so we will probably look at updating this later once we have a corresponding Mutter patch prepared. The other API changes were kept since they only affected experimental api.
2012-11-22 23:01:08 +00:00
if (!cogl_framebuffer_allocate (dst_fb, &ignore_error))
{
cogl_error_free (ignore_error);
goto error;
}
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
offscreen: rename _new_to_texture to _new_with_texture This renames cogl_offscreen_new_to_texture to cogl_offscreen_new_with_texture. The intention is to then cherry-pick this back to the cogl-1.16 branch so we can maintain a parallel cogl_offscreen_new_to_texture() function which keeps the synchronous allocation semantics that some clutter applications are currently relying on. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ecc6d2f64481626992b2fe6cdfa7b999270b28f5) Note: Since we can't break the 1.x api on this branch this keeps a thin shim around cogl_offscreen_new_with_texture to implement cogl_offscreen_new_to_texture with its synchronous allocation semantics.
2013-08-16 21:43:19 +00:00
src_offscreen= _cogl_offscreen_new_with_texture_full
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
(data->src_tex,
COGL_OFFSCREEN_DISABLE_DEPTH_AND_STENCIL,
0 /* level */);
src_fb = COGL_FRAMEBUFFER (src_offscreen);
Allow lazy texture storage allocation Consistent with how we lazily allocate framebuffers this patch allows us to instantiate textures but still specify constraints and requirements before allocating storage so that we can be sure to allocate the most appropriate/efficient storage. This adds a cogl_texture_allocate() function that is analogous to cogl_framebuffer_allocate() which can optionally be called to explicitly allocate storage and catch any errors. If this function isn't used explicitly then Cogl will implicitly ensure textures are allocated before the storage is needed. It is generally recommended to rely on lazy storage allocation or at least perform explicit allocation as late as possible so Cogl can be fully informed about the best way to allocate storage. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 1fa7c0f10a8a03043e3c75cb079a49625df098b7) Note: This reverts the cogl_texture_rectangle_new_with_size API change that dropped the CoglError argument and keeps the semantics of allocating the texture immediately. This is because Mutter currently uses this API so we will probably look at updating this later once we have a corresponding Mutter patch prepared. The other API changes were kept since they only affected experimental api.
2012-11-22 23:01:08 +00:00
if (!cogl_framebuffer_allocate (src_fb, &ignore_error))
{
cogl_error_free (ignore_error);
goto error;
}
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
data->src_fb = src_fb;
data->dest_fb = dst_fb;
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
return TRUE;
Don't use the label 'ERROR' because it conflicts with windows.h wingdi.h which gets included from windows.h #defines ERROR to 0 so we can't use it as a label in Cogl. This patch changes it to be error in lower case instead. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit e9bac2755c2cba84c82a856d369a30560d19a32e)
2012-06-20 14:18:15 +00:00
error:
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
if (dst_offscreen)
cogl_object_unref (dst_offscreen);
if (src_offscreen)
cogl_object_unref (src_offscreen);
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
return FALSE;
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
}
static void
_cogl_blit_framebuffer_blit (CoglBlitData *data,
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
int src_x,
int src_y,
int dst_x,
int dst_y,
int width,
int height)
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
{
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
_cogl_blit_framebuffer (data->src_fb,
data->dest_fb,
src_x, src_y,
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
dst_x, dst_y,
width, height);
}
static void
_cogl_blit_framebuffer_end (CoglBlitData *data)
{
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
cogl_object_unref (data->src_fb);
cogl_object_unref (data->dest_fb);
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
static CoglBool
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
_cogl_blit_copy_tex_sub_image_begin (CoglBlitData *data)
{
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
CoglOffscreen *offscreen;
CoglFramebuffer *fb;
Allow lazy texture storage allocation Consistent with how we lazily allocate framebuffers this patch allows us to instantiate textures but still specify constraints and requirements before allocating storage so that we can be sure to allocate the most appropriate/efficient storage. This adds a cogl_texture_allocate() function that is analogous to cogl_framebuffer_allocate() which can optionally be called to explicitly allocate storage and catch any errors. If this function isn't used explicitly then Cogl will implicitly ensure textures are allocated before the storage is needed. It is generally recommended to rely on lazy storage allocation or at least perform explicit allocation as late as possible so Cogl can be fully informed about the best way to allocate storage. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 1fa7c0f10a8a03043e3c75cb079a49625df098b7) Note: This reverts the cogl_texture_rectangle_new_with_size API change that dropped the CoglError argument and keeps the semantics of allocating the texture immediately. This is because Mutter currently uses this API so we will probably look at updating this later once we have a corresponding Mutter patch prepared. The other API changes were kept since they only affected experimental api.
2012-11-22 23:01:08 +00:00
CoglError *ignore_error = NULL;
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
/* This will only work if the target texture is a CoglTexture2D */
Make CoglTexture2D public as experimental API This exposes a CoglTexture2D typedef and adds the following experimental API: cogl_is_texture_2d cogl_texture_2d_new_with_size cogl_texture_2d_new_from_data cogl_texture_2d_new_from_foreign Since this is experimental API you need to define COGL_ENABLE_EXPERIMENTAL_API before including cogl.h. Note: With these new entrypoints we now expect a CoglContext pointer to be passed in, instead of assuming there is a default context. The aim is that for Cogl 2.0 we won't have a default context so this is a step in that direction.
2011-05-16 23:05:54 +00:00
if (!cogl_is_texture_2d (data->dst_tex))
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
return FALSE;
offscreen: rename _new_to_texture to _new_with_texture This renames cogl_offscreen_new_to_texture to cogl_offscreen_new_with_texture. The intention is to then cherry-pick this back to the cogl-1.16 branch so we can maintain a parallel cogl_offscreen_new_to_texture() function which keeps the synchronous allocation semantics that some clutter applications are currently relying on. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ecc6d2f64481626992b2fe6cdfa7b999270b28f5) Note: Since we can't break the 1.x api on this branch this keeps a thin shim around cogl_offscreen_new_with_texture to implement cogl_offscreen_new_to_texture with its synchronous allocation semantics.
2013-08-16 21:43:19 +00:00
offscreen = _cogl_offscreen_new_with_texture_full
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
(data->src_tex, COGL_OFFSCREEN_DISABLE_DEPTH_AND_STENCIL, 0 /* level */);
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
fb = COGL_FRAMEBUFFER (offscreen);
Allow lazy texture storage allocation Consistent with how we lazily allocate framebuffers this patch allows us to instantiate textures but still specify constraints and requirements before allocating storage so that we can be sure to allocate the most appropriate/efficient storage. This adds a cogl_texture_allocate() function that is analogous to cogl_framebuffer_allocate() which can optionally be called to explicitly allocate storage and catch any errors. If this function isn't used explicitly then Cogl will implicitly ensure textures are allocated before the storage is needed. It is generally recommended to rely on lazy storage allocation or at least perform explicit allocation as late as possible so Cogl can be fully informed about the best way to allocate storage. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 1fa7c0f10a8a03043e3c75cb079a49625df098b7) Note: This reverts the cogl_texture_rectangle_new_with_size API change that dropped the CoglError argument and keeps the semantics of allocating the texture immediately. This is because Mutter currently uses this API so we will probably look at updating this later once we have a corresponding Mutter patch prepared. The other API changes were kept since they only affected experimental api.
2012-11-22 23:01:08 +00:00
if (!cogl_framebuffer_allocate (fb, &ignore_error))
When internally using an FBO, check for allocation errors Both the cogl_texture_get_data and _cogl_blit_begin implementations will internally try to create an FBO for a texture and have fallbacks if the FBO fails. However neither of them were catching errors when allocating the framebuffer so the fallback wouldn't work properly. This patch just adds an explicit call to cogl_framebuffer_allocate for these uses and causes it to use the next fallback if it fails. Based on a patch by Adel Gadllah. https://bugzilla.gnome.org/show_bug.cgi?id=669368 Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-06 12:23:39 +00:00
{
Allow lazy texture storage allocation Consistent with how we lazily allocate framebuffers this patch allows us to instantiate textures but still specify constraints and requirements before allocating storage so that we can be sure to allocate the most appropriate/efficient storage. This adds a cogl_texture_allocate() function that is analogous to cogl_framebuffer_allocate() which can optionally be called to explicitly allocate storage and catch any errors. If this function isn't used explicitly then Cogl will implicitly ensure textures are allocated before the storage is needed. It is generally recommended to rely on lazy storage allocation or at least perform explicit allocation as late as possible so Cogl can be fully informed about the best way to allocate storage. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 1fa7c0f10a8a03043e3c75cb079a49625df098b7) Note: This reverts the cogl_texture_rectangle_new_with_size API change that dropped the CoglError argument and keeps the semantics of allocating the texture immediately. This is because Mutter currently uses this API so we will probably look at updating this later once we have a corresponding Mutter patch prepared. The other API changes were kept since they only affected experimental api.
2012-11-22 23:01:08 +00:00
cogl_error_free (ignore_error);
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
cogl_object_unref (fb);
When internally using an FBO, check for allocation errors Both the cogl_texture_get_data and _cogl_blit_begin implementations will internally try to create an FBO for a texture and have fallbacks if the FBO fails. However neither of them were catching errors when allocating the framebuffer so the fallback wouldn't work properly. This patch just adds an explicit call to cogl_framebuffer_allocate for these uses and causes it to use the next fallback if it fails. Based on a patch by Adel Gadllah. https://bugzilla.gnome.org/show_bug.cgi?id=669368 Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-06 12:23:39 +00:00
return FALSE;
}
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
data->src_fb = fb;
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
return TRUE;
}
static void
_cogl_blit_copy_tex_sub_image_blit (CoglBlitData *data,
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
int src_x,
int src_y,
int dst_x,
int dst_y,
int width,
int height)
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
{
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
_cogl_texture_2d_copy_from_framebuffer (COGL_TEXTURE_2D (data->dst_tex),
texture: expose mipmap level in set region apis cogl_texture_set_region() and cogl_texture_set_region_from_bitmap() now have a level argument so image data can be uploaded to a specific mipmap level. The prototype for cogl_texture_set_region was also updated to simplify the arguments. The arguments for cogl_texture_set_region_from_bitmap were reordered to be consistent with cogl_texture_set_region with the source related arguments listed first followed by the destination arguments. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 3a336a8adcd406b53731a6de0e7d97ba7932c1a8) Note: Public API changes were reverted in cherry-picking this patch
2012-11-09 17:55:54 +00:00
src_x, src_y,
width, height,
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
data->src_fb,
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
dst_x, dst_y,
texture: expose mipmap level in set region apis cogl_texture_set_region() and cogl_texture_set_region_from_bitmap() now have a level argument so image data can be uploaded to a specific mipmap level. The prototype for cogl_texture_set_region was also updated to simplify the arguments. The arguments for cogl_texture_set_region_from_bitmap were reordered to be consistent with cogl_texture_set_region with the source related arguments listed first followed by the destination arguments. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 3a336a8adcd406b53731a6de0e7d97ba7932c1a8) Note: Public API changes were reverted in cherry-picking this patch
2012-11-09 17:55:54 +00:00
0); /* level */
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
}
static void
_cogl_blit_copy_tex_sub_image_end (CoglBlitData *data)
{
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
cogl_object_unref (data->src_fb);
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
}
Switch use of primitive glib types to c99 equivalents The coding style has for a long time said to avoid using redundant glib data types such as gint or gchar etc because we feel that they make the code look unnecessarily foreign to developers coming from outside of the Gnome developer community. Note: When we tried to find the historical rationale for the types we just found that they were apparently only added for consistent syntax highlighting which didn't seem that compelling. Up until now we have been continuing to use some of the platform specific type such as gint{8,16,32,64} and gsize but this patch switches us over to using the standard c99 equivalents instead so we can further ensure that our code looks familiar to the widest range of C developers who might potentially contribute to Cogl. So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this switches all Cogl code to instead use the int{8,16,32,64}_t and uint{8,16,32,64}_t c99 types instead. Instead of gsize we now use size_t For now we are not going to use the c99 _Bool type and instead we have introduced a new CoglBool type to use instead of gboolean. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-04-16 20:56:40 +00:00
static CoglBool
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
_cogl_blit_get_tex_data_begin (CoglBlitData *data)
{
texture: make cogl_texture_get_format api private CoglPixelFormat is not a good way of describing the internal format of a texture because it's too specific given that we don't actually have exact knowledge of the internal format used by the driver. This makes cogl_texture_get_format private and in the future we'll provide a better way of querying the channels and their precision. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ffde82981f22bd0185a7f33e1e6e1479f4c295b8) Note: Since we can't break API compatibility on the 1.x branch this adds a cogl/deprecated/cogl-texture-deprecated.c file with a cogl_texture_get_format() wrapper around the private api. This also moves the cogl_texture_get_rowstride() and cogl_texture_ref/unref() functions that were previously deprecated into cogl-texture-deprecated.c
2013-06-27 17:33:04 +00:00
data->format = _cogl_texture_get_format (data->src_tex);
moves and renames _cogl_get_format_bpp This moves _cogl_get_format_bpp from cogl-bitmap.c to cogl.c and renames it to _cogl_pixel_format_get_bytes_per_pixel. This makes it clearer that it doesn't return bits per pixel and makes the naming consistent with other cogl api. The prototype has been moved to cogl-private.h since it seems we should be aiming to get rid of cogl-internal.h at some point. The patch also adds a simple gtk-doc comment since we might want to make this api public. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-13 23:02:04 +00:00
data->bpp = _cogl_pixel_format_get_bytes_per_pixel (data->format);
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
data->image_data = g_malloc (data->bpp * data->src_width *
data->src_height);
cogl_texture_get_data (data->src_tex, data->format,
data->src_width * data->bpp, data->image_data);
return TRUE;
}
static void
_cogl_blit_get_tex_data_blit (CoglBlitData *data,
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
int src_x,
int src_y,
int dst_x,
int dst_y,
int width,
int height)
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
{
texture: expose mipmap level in set region apis cogl_texture_set_region() and cogl_texture_set_region_from_bitmap() now have a level argument so image data can be uploaded to a specific mipmap level. The prototype for cogl_texture_set_region was also updated to simplify the arguments. The arguments for cogl_texture_set_region_from_bitmap were reordered to be consistent with cogl_texture_set_region with the source related arguments listed first followed by the destination arguments. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 3a336a8adcd406b53731a6de0e7d97ba7932c1a8) Note: Public API changes were reverted in cherry-picking this patch
2012-11-09 17:55:54 +00:00
CoglError *ignore = NULL;
int rowstride = data->src_width * data->bpp;
int offset = rowstride * src_y + src_x * data->bpp;
_cogl_texture_set_region (data->dst_tex,
width, height,
data->format,
rowstride,
data->image_data + offset,
dst_x, dst_y,
0, /* level */
&ignore);
Allow propogation of OOM errors to apps This allows apps to catch out-of-memory errors when allocating textures. Textures can be pretty huge at times and so it's quite possible for an application to try and allocate more memory than is available. It's also very possible that the application can take some action in response to reduce memory pressure (such as freeing up texture caches perhaps) so we shouldn't just automatically abort like we do for trivial heap allocations. These public functions now take a CoglError argument so applications can catch out of memory errors: cogl_buffer_map cogl_buffer_map_range cogl_buffer_set_data cogl_framebuffer_read_pixels_into_bitmap cogl_pixel_buffer_new cogl_texture_new_from_data cogl_texture_new_from_bitmap Note: we've been quite conservative with how many apis we let throw OOM CoglErrors since we don't really want to put a burdon on developers to be checking for errors with every cogl api call. So long as there is some lower level api for apps to use that let them catch OOM errors for everything necessary that's enough and we don't have to make more convenient apis more awkward to use. The main focus is on bitmaps and texture allocations since they can be particularly large and prone to failing. A new cogl_attribute_buffer_new_with_size() function has been added in case developers need to catch OOM errors when allocating attribute buffers whereby they can first use _buffer_new_with_size() (which doesn't take a CoglError) followed by cogl_buffer_set_data() which will lazily allocate the buffer storage and report OOM errors. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f7735e141ad537a253b02afa2a8238f96340b978) Note: since we can't break the API for Cogl 1.x then actually the main purpose of cherry picking this patch is to keep in-line with changes on the master branch so that we can easily cherry-pick patches. All the api changes relating stable apis released on the 1.12 branch have been reverted as part of cherry-picking this patch so this most just applies all the internal plumbing changes that enable us to correctly propagate OOM errors.
2012-11-08 17:54:10 +00:00
/* TODO: support chaining up errors during the blit */
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
}
static void
_cogl_blit_get_tex_data_end (CoglBlitData *data)
{
g_free (data->image_data);
}
/* These should be specified in order of preference */
static const CoglBlitMode
_cogl_blit_modes[] =
{
{
"texture-render",
_cogl_blit_texture_render_begin,
_cogl_blit_texture_render_blit,
_cogl_blit_texture_render_end
},
{
"framebuffer",
_cogl_blit_framebuffer_begin,
_cogl_blit_framebuffer_blit,
_cogl_blit_framebuffer_end
},
{
"copy-tex-sub-image",
_cogl_blit_copy_tex_sub_image_begin,
_cogl_blit_copy_tex_sub_image_blit,
_cogl_blit_copy_tex_sub_image_end
},
{
"get-tex-data",
_cogl_blit_get_tex_data_begin,
_cogl_blit_get_tex_data_blit,
_cogl_blit_get_tex_data_end
}
};
void
_cogl_blit_begin (CoglBlitData *data,
Removes all remaining use of CoglHandle Removing CoglHandle has been an on going goal for quite a long time now and finally this patch removes the last remaining uses of the CoglHandle type and the cogl_handle_ apis. Since the big remaining users of CoglHandle were the cogl_program_ and cogl_shader_ apis which have replaced with the CoglSnippets api this patch removes both of these apis. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0) Since the original patch was done after removing deprecated API this back ported patch doesn't affect deprecated API and so actually this cherry-pick doesn't remove all remaining use of CoglHandle as it did for the master branch of Cogl.
2012-04-16 13:14:10 +00:00
CoglTexture *dst_tex,
CoglTexture *src_tex)
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
{
int i;
if (_cogl_blit_default_mode == NULL)
{
const char *default_mode_string;
/* Allow the default to be specified with an environment
variable. For the time being these functions are only used
when blitting between atlas textures so the environment
variable is named to be specific to the atlas code. If we
want to use the code in other places we should create another
environment variable for each specific use case */
if ((default_mode_string = g_getenv ("COGL_ATLAS_DEFAULT_BLIT_MODE")))
{
for (i = 0; i < G_N_ELEMENTS (_cogl_blit_modes); i++)
if (!strcmp (_cogl_blit_modes[i].name, default_mode_string))
{
_cogl_blit_default_mode = _cogl_blit_modes + i;
break;
}
if (i >= G_N_ELEMENTS (_cogl_blit_modes))
{
g_warning ("Unknown blit mode %s", default_mode_string);
_cogl_blit_default_mode = _cogl_blit_modes;
}
}
else
/* Default to the first blit mode */
_cogl_blit_default_mode = _cogl_blit_modes;
}
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
memset (data, 0, sizeof (CoglBlitData));
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
data->dst_tex = dst_tex;
data->src_tex = src_tex;
data->src_width = cogl_texture_get_width (src_tex);
data->src_height = cogl_texture_get_height (src_tex);
/* Try the default blit mode first */
if (!_cogl_blit_default_mode->begin_func (data))
{
COGL_NOTE (ATLAS, "Failed to set up blit mode %s",
_cogl_blit_default_mode->name);
/* Try all of the other modes in order */
for (i = 0; i < G_N_ELEMENTS (_cogl_blit_modes); i++)
if (_cogl_blit_modes + i != _cogl_blit_default_mode &&
_cogl_blit_modes[i].begin_func (data))
{
/* Use this mode as the default from now on */
_cogl_blit_default_mode = _cogl_blit_modes + i;
break;
}
else
COGL_NOTE (ATLAS,
"Failed to set up blit mode %s",
_cogl_blit_modes[i].name);
/* The last blit mode can't fail so this should never happen */
Start to reduce dependence on glib Since we've had several developers from admirable projects say they would like to use Cogl but would really prefer not to pull in gobject,gmodule and glib as extra dependencies we are investigating if we can get to the point where glib is only an optional dependency. Actually we feel like we only make minimal use of glib anyway, so it may well be quite straightforward to achieve this. This adds a --disable-glib configure option that can be used to disable features that depend on glib. Actually --disable-glib doesn't strictly disable glib at this point because it's more helpful if cogl continues to build as we make incremental progress towards this. The first use of glib that this patch tackles is the use of g_return_val_if_fail and g_return_if_fail which have been replaced with equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-10-13 21:34:30 +00:00
_COGL_RETURN_IF_FAIL (i < G_N_ELEMENTS (_cogl_blit_modes));
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
}
data->blit_mode = _cogl_blit_default_mode;
COGL_NOTE (ATLAS, "Setup blit using %s", _cogl_blit_default_mode->name);
}
void
_cogl_blit (CoglBlitData *data,
blit: avoid referring to framebuffer stack This make _cogl_framebuffer_blit take explicit src and dest framebuffer pointers and updates all the texture blitting strategies in cogl-blit.c to avoid pushing/popping to/from the the framebuffer stack. The removes the last user of the framebuffer stack which we've been aiming to remove before Cogl 2.0 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 598ca33950a93dd7a201045c4abccda2a855e936)
2012-11-08 23:35:45 +00:00
int src_x,
int src_y,
int dst_x,
int dst_y,
int width,
int height)
cogl-atlas: Try 4 different approaches for migrating textures Instead of directly banging GL to migrate textures the atlas now uses the CoglFramebuffer API. It will use one of four approaches; it can set up two FBOs and use _cogl_blit_framebuffer to copy between them; it can use a single target fbo and then render the source texture to the FBO using a Cogl draw call; it can use a single FBO and call glCopyTexSubImage2D; or it can fallback to reading all of the texture data back to system memory and uploading it again with a sub texture update. Previously GL calls were used directly because Cogl wasn't able to create a framebuffer without a stencil and depth buffer. However there is now an internal version of cogl_offscreen_new_to_texture which takes a set of flags to disable the two buffers. The code for blitting has now been moved into a separate file called cogl-blit.c because it has become quite long and it may be useful outside of the atlas at some point. The 4 different methods have a fixed order of preference which is: * Texture render between two FBOs * glBlitFramebuffer * glCopyTexSubImage2D * glGetTexImage + glTexSubImage2D Once a method is succesfully used it is tried first for all subsequent blits. The default default can be overridden by setting the environment variable COGL_ATLAS_DEFAULT_BLIT_MODE to one of the following values: * texture-render * framebuffer * copy-tex-sub-image * get-tex-data
2011-01-20 17:45:47 +00:00
{
data->blit_mode->blit_func (data, src_x, src_y, dst_x, dst_y, width, height);
}
void
_cogl_blit_end (CoglBlitData *data)
{
data->blit_mode->end_func (data);
}
Reference in New Issue Copy Permalink