We used to keep the workspace switcher slid out when the user made use
of workspaces. This was changed in commit 2d84975 to give more space
to window previews, but it turned out to make the switcher quite a lot
more difficult to interact with (rather than only being a question of
discoverability). So go back to the previous behavior.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/161
During global grabs, actors miss enter and leave events required
for correct hover tracking. This can cause the workspace switcher
to get stuck while slid out, so ensure the actor's hover state is
synced after drag operations.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/161
Using a single resource file for all JS sources saves a couple of
build system instructions, but has some serious downsides:
- bundling the entire shell code with the tools blows
up their size unnecessarily
- the tools are rebuilt unnecessarily for any shell
code change
Autotools was painful enough to let this slip, but with meson we
don't have any excuses - using the actual dependencies speeds up
the build a tiny bit and reduces the tools' sizes from over 2M
to about 50k.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/192
We show a cover pane on top of the overview during transitions to
prevent issues caused by clicks and mouseover events when the overview
is not ready. Right now, this pane is only being shown on the primary
monitor, which obviosly allows interactions to happen before the
animations are finished on the secondary monitors.
To fix this, use the size of the whole stage for the cover pane.
Emitting it that soon results in JS warnings, as we don't have
everything in place yet. The position-changed signal will be
emitted from other locations as soon as we have it.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/464Closes: #464
When trying to close a window in the overview by clicking the close
button and the window doesn't get closed but a dialog is added to the
window afterwards, we close the overview and show the dialog.
Instead of adding a separate listener for the window-added signal to the
WindowOverlay, let the WindowClones remember that the close button was
pressed and activate themselves if a dialog is added after that.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/180
When a dialog is added to a window while the overview is shown, we get
its parent using get_transient_for() so we can add it to the right
window clone.
If we have multiple layers of dialogs we have to do this recursively
until we find the root ancestor. This case currently results in an
infinite loop: Since parent is always set to the same window, the
while-condition will always be true.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/180
For the OSD, all parameters except for the icon are optional - if the
caller doesn't include the 'label' option, the OSD won't show a label
etc.
While this makes sense for an API, it means that we have to be careful
to correctly differentiate an option that was omitted and an option
that has a 'falsy' value like false or 0.
Unfortunately since commit ccaae5d3c we no longer do, with the result
that OSDs meant for the first monitor will show up on all, and a level
of 0 is presented as no level bar instead of an empty one, whoops.
https://bugzilla.gnome.org/show_bug.cgi?id=791669
GSettings now recognizes per-desktop overrides that can be used
to change schemas' default values for a particular desktop. This
is not entirely unlike our existing custom override mechanism in
mutter, except that it is not limited to keys in org.gnome.mutter,
and it doesn't require a separate schema - the latter means that
we (and gnome-teak-tool) no longer have to figure out the correct
schema for the current login session and just use the original one.
https://bugzilla.gnome.org/show_bug.cgi?id=786496
Show an overamplified volume icon if volume is louder the max normalized one.
Use a similar logic as gnome-settings-daemon to delimit values, restricted
to output.
The purpose is to help users remember that visiting some websites or
using some apps can get LOUD.
https://bugzilla.gnome.org/show_bug.cgi?id=790280.
Implement for barLevel an overdrive area. This is a zone represented via a
different styling to indicate that you are bypassing the normal zone of
a given level, without reaching yet the maximum limit.
https://bugzilla.gnome.org/show_bug.cgi?id=790280.
Depending on hardware and recorded volume level, turning up the speakers
to the maximum volume may not be enough and the user will want to amplify
the volume above 100%. Currently this requires opening the sound Settings
panel which gets cumbersome when required repeatedly.
To support this case better, allow raising the sound volume above 100%
directly from the system menu if the feature is enabled via the
`allow-volume-above-100-percent` key in `org.gnome.desktop.sound`.
Allow osd representing levels that can be more than 100% by accepting
an optional parameter setting that maximum level.
gnome-settings-daemon will use this to indicate volume levels above 100%,
which our own volume indicator will soon support as well.
Ensure that both barLevel and slider can support a higher maxValue than 1
and computes various positions based on it.
It defaults to 1 if not set.
https://bugzilla.gnome.org/show_bug.cgi?id=790280.
Reuse the BarLevel class to get similar drawing behavior as Slider.
Rename theme css impacted properties and ensure that the osdWindow
remains accessible.
Ensure we don't force setting a custom border color like on the OSD.
https://bugzilla.gnome.org/show_bug.cgi?id=790280.
In a9ad91c831, a bug was introduced in the following code:
```c
this._settingsAction.connect('clicked',
this._onSettingsClicked().bind(this));
```
Notice that the callback is being executed! This commit
fixes that by removing the '()' from the callback.
As strings are guaranteed to use UTF-8 in the GNOME platform, generic
file APIs like g_file_load_contents() return raw data instead. Since
gjs' recent update to mozjs60, this data is now returns as Uint8Array
which cannot simply be treated as string - its toString() method boils
down to arr.join(',') - so use gjs' new ByteArray module to explicitly
convert the data.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/179
The settings action button in the system menu simply launches
gnome-control-center, so we want its icon (and accessible name)
to always match the app. So instead of keeping the button in-sync
with Settings, just look up that information from the app itself.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/433
We can simply request the symbolic variant from CSS so that we don't
have to append '-symbolic' to all the names. This will always make
it easier to pick up that information from external sources (like
.desktop files).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/433
Commit e5c95b910d refactored the workspace animation to also handle
animations that involve all surrounding workspaces, but due to an
ill-advised review comment (guess whose) it broke the animation
for non-neighboring workspaces.
Update the code to handle correctly whether in a given direction:
- we have the target workspace of a given index
- we have a neighboring workspace
- we don't need to animate anything
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/182
Add a debug command (to be executed manually via Alt+F2) to check
that all of gnome-shell's file descriptors have the CLOEXEC flag set.
This is important so that internal file descriptors do not get passed
to apps when they are launched.
It prints a warning message for every fd that does not have the flag set.
fdwalk() is used from the standard library if available (it is not
available in glibc), otherwise we use the same implementation as glib
has internally.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/132
When 4fg swipe motion happens, set up early the workspace switching
animation with all surrounding workspaces. This allows us to move
all content back and forth in any direction. This works on both
touchcreens and touchpads.
When the gesture is activated, the same data is reused to follow
up with the tween animation.
The threshold has been also doubled, it was fairly small to start
with, and feels better now that workspaces stick to fingers.
https://bugzilla.gnome.org/show_bug.cgi?id=788994
Besides the separation into distinct functions, the stored data has
been made able to generically store windows from all surrounding
workspaces. All while keeping a special mode to animate between two
workspaces (The usual till now), this is the only mode exercised so
far.
In order to ease animations, all window groups are now children of
a common container, which is then animated.
A custom callback type is more convenient, but only as long as no
other callback type is required. We are about to add functionality
that does not return the filename to a screenshot saved on disk, so
prepare for that by moving to GIO's generic async callback pattern.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/286
Fullscreen windows cannot be restored by touch device users unless the
application adds support for it.
As it is unlikely to change all application lets introduce a top edge
drag gesture which unmakes fullscreen windows.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/123
Make the indicator for active remote access use the warning color, to
indicate the severity of allowing remote access.
This only makes the indicator icon orange; the icon in the system menu
is still white.
When in lockscreen mode there's no point of resetting the auth login as there's
no welcome screen, and that would just cause the UI to freeze, with no reason.
This could have been useful if we were stopping the user to login for a given
time after ALLOWED_FAILURES attempts, but this is not the case yet.
When we get a reset signal the preemptiveAnswer should be also unset or it will
be used next time the user authPrompt will be activated, even without any further
user interaction.
Fixes#311
Add an indicator for when there is something access the display server
remotely. This could be 1) remote desktop, 2) screen cast or 3) remote
control, but all effectively applications using
org.freedesktop.portal.ScreenCast or org.gnome.portal.RemoteDesktop as
well as gnome-remote-desktop using the corresponding org.gnome.Mutter
APIs directly.
As it is now, it'll simply show a single icon for when anything is
having an active session, and a single action "Turn off" that'll close
every active session.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/160
The input method may hint that certain keycodes should be pressed/released
besides the textual information in ::commit. An example is hitting space
in some IMs to commit text, where both ::commit happens, and an space is
visibly inserted. In order to handle this properly, we must honor
::forward-key-press.
In order to cater for the case that a keypress is forwarded while handling
that same keypress in a physical keyboard, check the current event being
handled and just forward it as-is if it matches. This is necessary to
prevent state from being doubly set, and the second event silenced away.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/275Closes: #275
If we're started by systemd, we won't be in the user's display session.
However, this is still the session that will get locked & unlocked. Ask
logind what the 'display' or 'greeter' session is, and watch for the
Unlock signal for that session to know when to unlock.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/137
For windows, the cursor location needs to be adjusted by the frame
offsets. However we cannot assume that there is a window, as the
shell itself can have the key focus.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/414
Maximized and tiled windows can be restored with a drag gesture,
not only from their titlebars, but also from any non-reactive
parts of the top bar above the window. Currently this only works
for actual pointer devices, extend the behavior to handle touch
as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/112
If the Escape key is used for a window/app cycler/switcher shortcut
(such as "Switch windows directly"), then there is no way to cancel
the switching/cycling operation with the keyboard.
This change allows cancelling such an operation by pressing the Tab
key, but only if Tab is not already being used by the current
switcher/cycler shortcut.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/315
Key events involved in a keyboard shortcut are not completely consumed by
Mutter. That means that if the popupMenu is bound to a shortcut (e.g.
Alt<Space>) and the user keeps the keys pressed, the same key-event will be
delivered to the popupMenu. We can workaround this issue filtering out all the
events where a a modifier is down (except capslock).
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/372
Destroying and recreating the entire events list on every change is not only
wasteful, it also breaks the clear functionality as messages scheduled for
removal are replaced with "new" messages after the first message has been
removed.
Address both issues by keeping track of all messages and re-use them
whenever possible.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/325
And stop using FocusCaretTracker for caret position purposes. This
new object uses 1) the text-input protocol in wayland and 2) Info
from IBusPanelService for X11 (which is meant to work for XIM too).
This drops the usage of AtspiEventListener for OSK purposes, which
is best to avoid.
If a clone gets destroyed before the corresponding MetaWindow is
removed from the workspace, we will still find it in the list of
clones and try to destroy it again. Avoid the resulting warnings
by updating the list of clones immediately when a clone is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
If a clone gets destroyed before the corresponding MetaWindow is
removed from the workspace, we will still find it in the list of
clones and try to destroy it again. Avoid the resulting warnings
by updating the list of clones immediately when a clone is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
Remove any usage of MetaScreen, as it has been removed from libmutter
in the API version 3. The corresponding functionality has been moved
into three different places: MetaDisplay, MetaX11Display (for X11
specific functionality) and MetaWorkspaceManager.
https://bugzilla.gnome.org/show_bug.cgi?id=759538
This may be the case where keyboardIndex is -1, which may be the
case where either the keyboard monitor hasn't been set yet, or
the keyboard is being unmanaged and meta_window_get_monitor
returns -1
https://bugzilla.gnome.org/show_bug.cgi?id=788882
When middle-clicking an app icon on the Dash, it will always try to open
a new window of that app, even if the app doesn't support multiple
windows. Meanwhile, Ctrl+click on an app will only open a new window if
the app allows it.
This change prevents middle-clicks on app icons from opening new windows
for apps without multi-window support.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/316
When the actor that has the key focus is destroyed, Clutter moves
the focus to the stage. In case the destroyed actor was inside a
ModalDialog, this breaks any keyboard interaction: keynav is broken
because the stage isn't in any focus chain, and access keys like
Escape because they are handled on the dialog's parent.
The only dialog that may destroy a child without recreating the dialog
buttons (and thus moving the key focus there) is the WirelessDialog,
fix it by keeping the key focus within the dialog when removing networks
from the list.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/76
Just like we did for the window list in app icons' context menu,
provide a fallback for window captions in the window picker rather
than showing blank items to the user.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/26
The app icon's context menu contains a list of open windows,
identified by their title. As we currently don't handle the
case where the app didn't set a title, we end up with empty
menu items which looks clearly broken. Fall back to the app's
name in that case.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/26
The close dialog for non-responding windows is closed automatically
when we detect that the window is responding again. However as we
currently only ping the window in response to certain user actions
(like focusing the window or opening the window menu), this can
easily go undetected.
Address this by periodically pinging the window while the close
dialog is shown.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/298
The dialog won't be visible when unredirection is in place (for example
while a fullscreen window is focused), so disable unredirection while
the dialog is up.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/298
Similar to what it's done when the main connection changes, we need
to make sure that the icon in the panel gets updated before calling
_syncConnectivity(), so that the icon gets always updated if needed,
regardless of whether there's an active connection or not.
This is needed because there's at least one case when an icon should
be shown when the computer is not connected to any network: when a
hotspot has been enabled, which can be useful even if there's not
an internet connection to share (e.g. to easily allow connecting
other devices to the computer.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/214
While the libnm-glib version of the function returns a GByteArray*
that gjs can directly cast to the required gutf8*, the libnm function
returns GBytes* from which we need to explicitly fetch the data.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/136
commit 642107a2 attempts to avoid resetting the current keymap on
spurious input source changes.
It does this by checking if the current layout id is found in
the new list of layouts and resetting the current layout to the
associated match in the list. By not nullifying the current
layout, it won't get subsequently reset.
Unfortunately, if the order of the list changes, resetting the
current keymap is still necessary, since the order corresponds
with the index of the activated group.
This commit changes the code to nullify the current layout if
its group index changes.
https://bugzilla.redhat.com/show_bug.cgi?id=1573923
The IM can pretty much update the input sources anytime (even if
to set the same ones). That ends up triggering rebuilding all user
defined keymaps, and losing modifier state if we are unfortunate
enough that this caught us while pressing one.
One common situation seems to be password entries, resulting in
the wrong character being printed if the first character happens
to require the shift key.
If the current keymap is not found in the newly loaded list,
this._current will end up null, with the same behavior as we get
currently (immediate keymap reload).
https://bugzilla.redhat.com/show_bug.cgi?id=1569211https://gitlab.gnome.org/GNOME/gnome-shell/issues/240Closes: #240
Commit f285f2c6 changed Scripting.createTestWindow() to accept a parameter
object instead of a parameter list but forgot to remove the width and height
arguments. This breaks the "core" test as all windows are created with default
settings.
We use the close() method to disconnect signal handlers set up in
init(), however the handler ID is only valid in the first call in
case the method is called more than once.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/221
If we get an error during device enrollment, the message might be
prefixed to indicate that the error came from the remote peer. We
are presenting that message to the user so strip that prefix away
if it was there.
The devices emitted (device, error) while the connected handler
was expecting (error, device). The former is more consistent
with the rest of the code (so change it to device, error).
The _blockTimedLoginUntilIdle method sets a timeout to be called after
the user is idle for 5 seconds. That timeout is erroneously given the
source name "[gnome-shell] this._timedLoginAnimationTime" which looks
like a copy-and-paste mistake. The original intention was probably to
use a source name of "[gnome-shell] this._timedLoginIdleTimeOutId" which
more closely matches existing convention for source names.
This commit fixes that.
Make sure the focus isn't grabbed right after user interaction starts a
new timed login. Only grab it after the idle timeout is done and on the
first run instead.
Normally, we give the user a 5 second grace period of inactivity before
starting a timed login operation. Unfortunately, that grace period
timeout isn't properly removed if the timed login operation is restarted
during the grace period. That means the timeout handler can
inadvertently get called multiple times leading to the grace period
duration getting subtracted from the total animation time more than
once.
This commit ensures we only ever have one grace period timeout scheduled
at a time.
The timed login feature currently cancels the timed login operation when
a user presses a key but, oddly, only hides the indicator when the user
releases the key. This means that if a user holds down a key that
doesn't key repeat, the timed login indicator will continue to run after
the timed login operation is cancelled.
This commit address the problem by ensuring the timed login indicator is
hidden on any key press event, at the same time the timed login
operation is canceled.
Modes, extensions and other GNOME Shell assets are searched in appropriate
subdirectories of each directory in XDG_DATA_DIRS, falling back
to global.datadir.
However, this isn't the case for themes, which are currently always expected
in global.datadir, even when referenced by a mode in a different XDG_DATA_DIR.
The fix is to have the theme finding pattern follow the same logic as other
elements.
Fixes#167.
The HIG discourages the use of icons in menus except for "noun" items
(files, bookmarks, ...). While those should be rarely used in the
application menu, it still makes sense to support them in the few
cases where they are used.
https://bugzilla.gnome.org/show_bug.cgi?id=760985
Otherwise it happens that porthole is computed again after that the
overlay is hidden (triggered by a layout reallocation) and thus not
regenerated again afterwards.
https://bugzilla.gnome.org/show_bug.cgi?id=792687
The author of the original URL-matching regex warns[0] that the pattern may
cause certain regex engines to lock up with certain input, namely patterns
that contain parentheses. It turns out SpiderMonkey is affected, but rather
than switching to the author's improved version (that is still crazy), sim-
plify the pattern a bit by removing support for nested parentheses in URLs.
Even a single pair of parentheses is extremely rare, so this is unlikely to
make a noticeable difference (other than not locking up SpiderMonkey of
course) ...
[0] http://daringfireball.net/2010/07/improved_regex_for_matching_urls
Since commit 78a92fb6be we no longer pop up authentication dialogs
on the lock screen, however any dialog that is already open at that
time remains open. This is unexpected, so hide the dialog until
the screen is unlocked again.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/166
Since commit 1939e22c22, we move the keyboard focus with the hover
highlight. However while this makes sense when interacting with
the window picker, it interferes with keyboard navigation of other
components like dash or top bar. Address this by only moving the
focus when the previous focus was already inside the window picker
or unset.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/50
The original UTC support in GWeather piggy-backed on the existing API, but
as "country" or "city" don't make sense in the context of UTC or AoE, the
concept of "named timezones" was introduced. Handle those explicitly to get
back labels for those locations.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/150
We don't toggle the overview if the request happens too close to the
last activation, to filter out double-clicks or activation by both
the hot corner and a click. However as the check is based on the
real time, the check breaks if the system clock moves backwards and
the last activations appears to be in the future. Fix this by using
monotonic time which is guaranteed to only move forward.
https://bugzilla.gnome.org/show_bug.cgi?id=763886
While polkit requests *should* be the result of a user action, that's
not always the case in practice and authentication dialogs can pop up
out of nowhere at any time. That's always annoying, but particularly
bad on the lock screen. If we disabled the polkit component altogether,
the fallback GTK-based agent would kick in, so instead handle the case
explicitly and postpone showing the dialog until the session is unlocked.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/179
Even though we are using an "xkb" source, it still makes sense to
pass the event through the IBus simple engine, in order to let it
handle compose keys and ctrl+shift+[u|e].
https://gitlab.gnome.org/GNOME/gnome-shell/issues/115Closes: #115
boltd 0.2 gained a property that indicates if it is authorizing
devices or not. If it indeed is not authorizing then we wont
try to enroll new devices because that would otherwise lead to
and error.
When we move keyboard focus to the search entry, we replay the key press
that triggered the move to the entry using ClutterActor's event() method.
Since commit 3b293e91e we specify that the event is in the capture phase
to make it work with StIMText, but now that commit 83accce24 removed it,
we have to return to the expected non-capture flag that matches the orig-
inal event to unbreak find-as-you-type functionality.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/72
Find-as-you type was never automatically handled by StIMText, but
by the existing stage key-press handler. The functionality broke
for a different reason, we will fix it after reverting the recent
captured-event changes.
This reverts commits bc4462cd0c and e4ee944d8d.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/72
Since commit c4f2bb5f, close buttons are hidden by making them fully
transparent rather than setting their visibility to false to keep
the overall message layout stable. As a result, the buttons now work
even when invisible, which is clearly unexpected - fix this by updating
the reactive property appropriately.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/66
When not using arrow notation with anonymous functions, we use Lang.bind()
to bind `this` to named callbacks. However since ES5, this functionality
is already provided by Function.prototype.bind() - in fact, Lang.bind()
itself uses it when no extra arguments are specified. Just use the built-in
function directly where possible, and use arrow notation in the few places
where we pass additional arguments.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/23
imports.misc.ibusManager.IBus is declared as const, so referencing it
from another module triggers a warning with recent mozjs. As of commit
083d11a032 IBus is mandatory, so just make it a regular import to avoid
the warning.
Right now we emit session-activated any time the bullet
moves in the session menu. That includes at startup when
picking an item arbitrarily, and any time GDM reports the
session was read from the user's account settings.
session-activated informs GDM about the newly selected session,
so emitting it in response to GDM reporting a session is a
bad idea.
This commit changes the code to only emit session-activated when
the user explicitly activates a session item from the gear menu.
Note, we no longer set the active session explicitly at start up.
This is a good thing since the item we were picking wasn't
necessarily correct. It does means if GDM fails to inform us
about the correct default session we'll now show no bullet instead
of a bullet on the wrong item.
https://bugzilla.gnome.org/show_bug.cgi?id=740142
gnome-shell currently initiates an automatic login attempt if
timed login is enabled and the timed login animation completes.
Unfortunately, if animations are disabled (as is the case for
virtual machines) then the timed login animation will complete
instantly, and timed login will proceed immediately after gnome-shell
has noticed the user is idle for 5 seconds.
This commit addresses that problem by initiating timed login and the
animation from a main loop timeout, instead of using the tweener api.
This is pseudo-class is added on .shift-key-uppercase whenever the shift
state is latched, a matching selector would be:
.keyboard-key.shift-key-uppercase:latched {}
https://gitlab.gnome.org/GNOME/gnome-shell/issues/46
Drop the UTF8 glyphs from those, and add style classes so those can be
specifically themed and given a background image. The style classes are:
.keyboard-key.enter-key{}
.keyboard-key.shift-key-lowercase{} /* applies while lowercase */
.keyboard-key.shift-key-uppercase{} /* applies while uppercase */
.keyboard-key.layout-key{}
.keyboard-key.hide-key{}
https://gitlab.gnome.org/GNOME/gnome-shell/issues/46
Do the finicky checks to adjust key widths and whatnot based on other
values than the label. This makes the label exclusively used for
presentation (i.e. setting up a St.Label).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/46
Instead of latching all states, make shift unlatched by default, and only
latched when making a long press on the key. When not latched, the keyboard
will switch to the first level (alphabetic lowercase) after the first key
press.
Also, move the actual level switch to Key::pressed, so it feels more
reactive on long press.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/46
It was mistakenly connecting twice to the 'released' signal. Also, move
level changes to key release, since it will be more convenient to hook
latched states on long press.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/46
These objects created this.actor being the St.Button, and a surrounding
this.container actor that is the actual actor callers care about. Turn this
around and make this.actor be the parent-less actor, and this.keyButton the
contained internal button. This is more consistent with gnome-shell style.
Commit 8fdf47ea5b removed _addKeys(), but forgot one caller. We just want
to regenerate the keyboard for the current group, so call into the
_onGroupChanged function.
While the scale factor is taken into account for app icons, we set
an explicit size when combining the into a folder icon - unless we
take the factor into account, the result will be too small on HiDPI
displays.
https://bugzilla.gnome.org/show_bug.cgi?id=792259
The captured-event handler just redirects focus there on the first keypress,
what it doesn't account for is that other entries may be active while the
Activities overview is opened (eg. alt-f2, or other modal dialogs). Play
along with other entries, and make it only steal focus if no other entry
is selected.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/33Closes: #33
Similar to what has been done for the apps switcher, this allows closing
windows pressing W or F4 while operating the windows switcher popup or
the apps switcher popup while navigating the list of windows for an app.
https://bugzilla.gnome.org/show_bug.cgi?id=620106
This will be mainly useful for closing apps from the applications
switcher, but can be implemented generically enough to select the
nearest existing item after removal if there's any, or destroying
the popup's actor otherwise.
Specifically for the apps switcher, doing this also removes the need
of having to manually either update the current app in AppSwitcher
and highlight it, if there are still any items after the removal, or
simply destroy the AppSwitcher otherwise. Besides, calling _select()
in the handler for item-removed makes sure that the list of thumbnails
in the switcher is always closed, if open, when quitting the app.
https://bugzilla.gnome.org/show_bug.cgi?id=620106
Make sure that the items from the applications switcher and the windows
switcher are removed when the related applications get stopped, or some
of the associated windows closed.
https://bugzilla.gnome.org/show_bug.cgi?id=620106
glibc 2.27 introduced new format specifiers for the month names.
It's obligatory to use them in several languages already and it's
encouraged to use them for all languages because it is not destructive
for any language. As more languages are expected to follow this
standard it's better to use the "%OB" format specifier now so it will
start working correctly automatically.
See also: https://sourceware.org/bugzilla/show_bug.cgi?id=10871
This standard has been also working in BSD and OS X since 1990s,
if anyone tries to use gnome-shell in these systems.
Note: This will not work correctly with glibc < 2.27, there is no
detection whether the system is old or new.
https://bugzilla.gnome.org/show_bug.cgi?id=780957
We keep track of the lock state and restore it on startup to prevent
a crash from bypassing the screen lock. However on wayland, a crash
doesn't result in gnome-session restarting gnome-shell, but brings
down the entire session - that is, restoring the lock state does not
actually protect the existing session in that case, but forces the
user to authenticate twice in order to start the next session. This
is clearly not helpful, so avoid this by not saving the state when
running as wayland compositor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/17
Align and center the date entry with the workspace's workarea.
This way, maximized applications have their window aligned with the top date
entry.
This doesn't change anything for desktops with no docks or when left/right
workareas are aligned with the monitor.
The offset is leftOffset - rightOffset:
(workArea.x - monitor.x) - (monitor.width - ((workArea.x - monitor.x) +
workArea.width))
https://bugzilla.gnome.org/show_bug.cgi?id=792354
We will now basically act as "policy provider" for thunderbolt
peripherals by using org.freedesktop.bolt service: when new
devices are connect and session is a unlocked user session
we will automatically enroll (authorize and store in the database)
them.
If new devices are connected but the session is locked a message
will be shown informing the user that the device needs to be
reconnected to properly work.
The org.freedesktop.bolt service is provided by the "bolt" daemon.
Currently the language options displayed pretty much mirror those of the
top bar keyboard layout selection popup. It may make sense in the future
to only list languages, and automatically switch to the enabled IMs that
the OSK can benefit from (eg. by filling in suggestions).
The focused window will move up/down together with the OSK if the focus
area happens to be covered by the area to be covered by the OSK. This
state is reverted whenever the window loses focus, given it wasn't
relayout in between.
IBus was initially made optional as gnome-shell depended on too
recent API. This API is now old enough and gnome-shell is committing
further to IBus by implementing a ClutterInputMethod through it.
Let's just make IBus a mandatory dependency, instead of making code
paths trickier to cater for situations where it's missing.
