Keeping the volume menu open after setting the desired volume isn't that
useful and forces a second click (or an Esc press) to dismiss it. Allow for
the sliders to be used with a single click-hold-move-release.
https://bugzilla.gnome.org/show_bug.cgi?id=649586
On error, we tried to kill and respawn gnome-power-manager, but
as of commit c5676900 the DBus interface provided by g-s-d's power
plugin is used, so the respawning does not have any effect.
https://bugzilla.gnome.org/show_bug.cgi?id=654300
When one of the networks in the main menu is removed and we have
a More... submenu, we can take the first out from the submenu and
show it in the main menu.
https://bugzilla.gnome.org/show_bug.cgi?id=647175
Use the new PopupSwitchMenuItem functionality when bluetooth cannot
be enabled. Use it also for showing "connecting..." when activating
device items.
https://bugzilla.gnome.org/show_bug.cgi?id=648048
Moves and converts NMDeviceTitleMenuItem from network.js into
PopupSwitchMenuItem, so that it can show both a switch and a
greyed-out status label. This will be soon used by the Bluetooth menu.
https://bugzilla.gnome.org/show_bug.cgi?id=648048
_createNetworkItem was always appending access point at the end of
the menu when their position was < 5 (NUM_VISIBLE_NETWORKS), ignoring
the presence or absence of _overflowItem, which thus ended in the
middle of the network list. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=652313
If we have more than 5 (which can happen with VPN connections), place
them into a More... submenu, which also becomes scrollable if needed.
To protect from race conditions and ordering issues while reading
connections, sort them in alphabetic order when the timestamp is equal.
https://bugzilla.gnome.org/show_bug.cgi?id=651602
Some users are confused when their devices are not shown in the
network menu, even if they configured them manually. Mark their presence
by showing them in the menu, even if they cannot be otherwise
interacted with.
Also add a status string for deactivating devices (none currently,
soon will appear in NetworkManager).
https://bugzilla.gnome.org/show_bug.cgi?id=646946
All WPA APs were getting set as WPA2 due to the check for privacy;
WPA/WPA2 APs *must* set the Privacy bit according to the standard,
so we'd never end up in the case for NMAccessPointSecurity.WPA.
Fix that, and also add flags for WPA[2] Enterprise which we'll
use a bit later for the first-time connect case for 802.1x enabled
access points.
Instead of rolling our own code, use new libnm-glib functions to do
the same thing. Requires libnm-glib as of
779215c742bbe29a2c66202ec7e2e6d43edeb8ff (which will be part of 0.9).
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=648648
Previously, we skipped rebuilding device items in case the device
had already been seen, but this caused the connected switch not to
be updated. Now it has been refactored to update in case the device
changes, and to create only when the device is completely new.
https://bugzilla.gnome.org/show_bug.cgi?id=647565
Adds a function that compares wireless networks and keeps them sorted
at all times. Order is: first already configured connections, then
first secure networks, then alphabtic. Also, the appearance of a new access
point no longer causes the whole menu to be rebuilt (but it still linear
searches for the position, I guess that could be skipped), which caused
the addition of more code for tracking the active access point.
https://bugzilla.gnome.org/show_bug.cgi?id=646580
The IP_CHECK and SECONDARIES states should be considered part of the
"connecting..." phase.
DEACTIVATING should be its own stage, but that would break string
freeze, so we just treat it like DISCONNECTED for now.
UNMANAGED needs to be treated differently in 3.2, but it is too late
to fix it for 3.0.1.
https://bugzilla.gnome.org/show_bug.cgi?id=646946
When more than one device exists, we need to reset the section title's
device to null, and in that case we must show nothing (neither the switch
nor the label, but an empty label is OK anyway). Also, we need to
update the device statusItem immediately when constructing it, as we
may not get any state-changed.
https://bugzilla.gnome.org/show_bug.cgi?id=646074
NMDeviceModem._createSection was not checking whether it should have
shown the connection list, resulting in status item shown even if
the device was in an invalid state.
Also, fix a logic error when creating the operatorItem and fix overriding
_clearSection protected method.
https://bugzilla.gnome.org/show_bug.cgi?id=646395
NMApplet connects to each NMDevice's state-changed signal and stores
the signal handler id on the NMDevice itself. However, it was using
the same name as NMDevice itself was using to store the handler ID for
the underlying GObject's state-changed signal, thus overwriting it,
and resulting in *neither* signal handler getting removed if the
device went away. (This probably isn't a problem, since the device is
going away, but it causes a warning.)
Also, at least for WWAN devices, the device state changes to UNMANAGED
immediately before disappearing, but getStatusLabel() wasn't handling
that case and printed a warning instead. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=646708
If you restart NetworkManager, then the list of active connections
is emptied, then comes back with the same GObjects in it. If the
_primaryDevice field isn't cleared on the object, then we won't
know we need to set it back on the device, resulting in the active
device not showing up in the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=646558
A notify signal does not include the new value of the property in
its signature, so the handler was trying to compare a GParamSpec with
a number when updating. Fix it to always retrieve the value from the
object.
https://bugzilla.gnome.org/show_bug.cgi?id=646443
Since the icon area is end-aligned, the signal strength icon for
insecure networks was ending up aligned with the lock icon for secure
networks. Fix that by always including a _secureIcon, but having it be
blank for the insecure networks.
https://bugzilla.gnome.org/show_bug.cgi?id=646121
Some connection types (like wimax) are not supported by the menu, and
should be ignored instead of throwing exceptions. Also, NetworkManager
had a bug that sent connections with invalid settings. This should not
happen, but in case it does, we will not blow up, but just log a warning
and continue silently.
https://bugzilla.gnome.org/show_bug.cgi?id=646355
When a device is connecting, we can continue showing available
connections and access points, as well as the active one with the dot.
(Hiding was a remnant of when the device status was on a different
menu item than the title)
https://bugzilla.gnome.org/show_bug.cgi?id=646381
A cosmetic change recommended in review of the patch to fix the
VPN Connections switch ended up introducing a logic error that
made the switch not work properly. Fix.
https://bugzilla.gnome.org/show_bug.cgi?id=646380
It was always reporting true, even if disconnected. At the same time,
add a signal that is emitted when state changes and update the UI
accordingly.
In the future (with another libnm-glib API break) we should use the
NMVPNConnection object to track the connection state, so that we can
show if we're connecting or we need authentication.
https://bugzilla.gnome.org/show_bug.cgi?id=646380
NMDevice._findConnection expects an uuid as parameter, but
checkConnection was passing a NMConnection object. This caused
exists to be always false, thus the connection was added again every
time the 'updated' signal was emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=645702
For wired devices (actually, ethernet devices), hide the connection
list when there is only one connection (either automatic or stored).
The device can be operated with the associated switch.
Since device state Unavailable is generic and has substates, instead
of using an hack for carrier, introduce some code that checks both
for carrier and firmware-missing when in that device state, and updates
the UI accordingly.
Different methos are being used to launch the control-center panels of each
status icon. Standarize on Shell.AppSystem.
This also fixes the network icon using a non-existant Util.spawnDesktop()
method.
Bug #645091
In commit 9bd22dc0, I introduced an API to load an arbitrary
.desktop file, not necessarily from the menu path. It turns
out this function was broken because it created ShellApp instances
that were *different* from ones that were cached normally.
As far as I can tell, we didn't initially use it. Then later
Util.spawnDesktop was created which used this function.
Remove this broken function and all callers; if we're loading
.desktop files from *outside* the menu path, we can look at
readding.
This patch also kills off Util.spawnDesktop in favor of callers
talking to ShellAppSystem directly, now that the latter reports
errors.
https://bugzilla.gnome.org/show_bug.cgi?id=644402
Adds an implementation of nm-applet in javascript. Uses the new
introspection from NetworkManager, and temporarily requires
nm-applet to be running for the secret service.
Features a renewed interface, with each device controllable through
a switch, which if toggled off disconnects, and if toggled on
connects to the most recently used valid connection. More esoteric
features like creation of ad-hoc networks have been moved to the
control center panel.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
Inside the inner loop, use the inner iterator, not that of the outer
loop. At the same time, refactor the code to rely less on private
properties appended to foreign objects.
https://bugzilla.gnome.org/show_bug.cgi?id=644858
GJS complains when a NaN is passed in place of an integer, and
parseInt returns that from non numeric string. Pass a sentinel
that cancels the operation in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=642978
