DND of windows has a lot of side effects, including the possibility of
current workspace disappering from under our feet. We need to account
for that when trying to activate it.
https://bugzilla.gnome.org/show_bug.cgi?id=685285
When a swipe scroll completes, we scroll the active workspace into
view. This works fine if the gesture is completed properly by
emitting 'gesture-end', but not when Clutter considers the gesture
cancelled - in that case, the view remains stuck in an intermediate
position. To fix, treat 'gesture-cancel' the same as 'gesture-end'.
https://bugzilla.gnome.org/show_bug.cgi?id=689394
Both WorkspacesDisplay and ThumbnailsBox need to know when windows have been
restacked. Instead of each tracking changes on their own or trying to call
each other, have the overview keep track and do the calculations, emitting
a signal with the result.
https://bugzilla.gnome.org/show_bug.cgi?id=690175
The thumbnail controls are not a separate actor in the overview group
yet, so we need to ensure a spacing between them and the workspaces
view.
Instead of exporting the overview spacing, just add a temporary style
class to the workspaces-view actor for it. It will be removed in the
future when we change the layout of overview elements.
https://bugzilla.gnome.org/show_bug.cgi?id=690174
On additional monitors the workspacesView takes up the entire monitor
and in some cases windows in overview can end up hard against the
edge of the monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=688133
Ouch. This went unnoticed for a long time as by default (using
dynamic workspaces) only one workspace is added at a time, which
happens to work fine.
https://bugzilla.gnome.org/show_bug.cgi?id=686487
Hide workspace switcher if dynamic workspaces is disabled and number of
workspaces is set to one only, since the user is bound to only one workspace
and showing the switcher is redundant.
Signed-off-by: Seif Lotfy <seif@lotfy.com>
Currently we animate scrolling to the active workspace both when
the number of workspaces changed and after changing the active
workspace. So in case we don't actually change workspace, this
results in an unnecessary animation that may even have unwanted
side effects: when done during the overview transition (e.g. in
the case of opening and activating a window on an empty workspace),
non-active workspaces become visible during the transition.
To fix, don't scroll to the active workspace when the number of
workspaces changes and rely on the 'switch-workspace' signal being
emitted as necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=682002
Most of code implementing workspace switches was repeated with
minor differences on each direction. Instead, consolidate it
and use the new meta_workspace_get_neighbor.
https://bugzilla.gnome.org/show_bug.cgi?id=674104
Currently we only connect to the 'notify::n-workspaces' signal the
first time the overview is shown, which means we will miss any
changes to the workspace layout in the meanwhile.
In particular, the decision of whether the workspace switcher should be
shown is taken before the dynamic workspace handling takes over, and is
thus based entirely on the value of the num-workspaces user preference
rather than the actual number of workspaces.
Just connect the signal in _init() (with the nice side-effect to make it
explicit that the signal handler won't ever be disconnected).
https://bugzilla.gnome.org/show_bug.cgi?id=673198
We seem to have a lot of code that does something along the lines of:
if (condition)
actor.show();
else
actor.hide();
ClutterActor already has such a thing for exactly this purpose: the 'visible'
property. Use it instead of the mess above.
https://bugzilla.gnome.org/show_bug.cgi?id=672272
If the user has their mouse over the workspace thumbnails while
entering the overview, it's more likely that it's a coincidence
that their mouse pointer is in the area. Avoid expanding the
thumbnails box in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=651092
When in overview, window labels flicker or are temporarily hidden on a
number of occasions - when simply clicking around the area the windows
are displayed in, dragging a window, sliding in the workspace list,
adding new workspaces etc. This patch makes the label for any window
visible at any given moment when in overview and the said window is
not being dragged around.
https://bugzilla.gnome.org/show_bug.cgi?id=644861
If workspaces-only-on-primary is false, swipe scrolling is now
broken with multiple monitors. To fix, let workspacesDisplay
handle swipe scrolling for all views.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
If workspaces-only-on-primary is false, workspaces should be shown
on each monitor; rather than letting the existing workspaces span
the entire screen, manage one workspacesView per monitor (similar
to the extra workspaces in WorkspacesView when the setting is true).
https://bugzilla.gnome.org/show_bug.cgi?id=652580
Extra workspaces are special, in that they collect windows from
all workspaces for a particular monitor. This matches the default
behavior, but we need more than a single workspace per monitor if
workspaces-only-on-primary is false, so don't create the extra
workspaces in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
WorkspacesDisplay was introduced to manage the workspace objects
and views; however, the overview still accesses the view held
by the workspacesDisplay directly, which is a bit odd.
Add some additional methods needed by the overview, and make the
view a private property.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
The last patch in the sequence. Every place that was previously
setting prototype has been ported to Lang.Class, to make code more
concise and allow for better toString().
https://bugzilla.gnome.org/show_bug.cgi?id=664436
js2-mode is no longer developed and we recommend js-mode these days,
so switch the modelines to specify that, and make them consistent
across all files.
https://bugzilla.gnome.org/show_bug.cgi?id=660358
When workspace "previews" in the overview were just tiny gray
rectangles, it made sense to provide a way to move windows
directly between workspaces (by switching workspaces when dragging
a window to the corresponding screen edge). As the overview has
evolved however, the workspace switcher provides a good and
intuitive drop target already, so the alternative provided by the
screen edges is no longer necessary. As it also conflicts with
moving windows between monitors when using a vertical layout,
just remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=660838
Remove ShellGlobal's monitor-related methods, and have
Main.layoutManager provide that information instead. Move
Main._relayout() to LayoutManager, and have other objects connect to
the layout manager's 'monitors-changed' signal to know when the screen
geometry has changed.
https://bugzilla.gnome.org/show_bug.cgi?id=636963
Sliding out the workspaces pager when starting a drag causes a lot
of motion. With the pager only hiding if workspaces are not used,
it is better to require to explicitly hover the workspaces sidebar
for the sliding.
https://bugzilla.gnome.org/show_bug.cgi?id=652730
After completing the overview transition, the workspace view is
clipped to avoid overlapping the search entry/view selector titles
while switching workspaces. For clipping, the view's position and
size was used, which works well assuming that the workspace pager
will start hidden or stay zoomed out while the overview is visible.
However, that assumption holds no longer true, as auto-hiding the
pager now depends on the number of workspaces, and thus may change
while in the overview. For instance, when starting with the pager
being visible, the clip area ends up being too small when moving
all windows to the first workspace (and thus triggering auto-hide).
As a fix, handle the clip rectangle separately from the view's
geometry, and set it always to the area the workspaces would
occupy with the pager hidden.
https://bugzilla.gnome.org/show_bug.cgi?id=653142
With commit 59a3e393f9 whether the workspace pager should autohide
now depends on the number of workspaces. As we only track changes
to the number of workspaces while the overview is visible, we miss
changes in "normal mode", i.e. when creating a new workspace by
moving a window with ctrl-alt-shift-arrow; as a result, the pager's
autohiding might be incorrect when entering the overview after that.
As a fix, keep tracking changes to the workspaces when the overview
is hidden and update the zoom options.
https://bugzilla.gnome.org/show_bug.cgi?id=653078
The purpose of autohiding the workspace pager on the right was to
avoid exposure of workspaces to users who are not using them.
However, for users who do use workspaces, the behavior limits the
purpose of the overview. To fix, always show the pager if more than
one workspace is actively used.
https://bugzilla.gnome.org/show_bug.cgi?id=652714
Currently the user has to find an empty spot in the workspace
to be able to launcha new instance of an app using dnd.
This is unnecessary hard, so just allow dropping on windows too.
https://bugzilla.gnome.org/show_bug.cgi?id=652079
Currently the workspace geometry is updated on zoom/allocation
changes, which means that newly added workspaces use their initial
geometry of (0, 0, 0, 0) until the next zoom change. As a result,
windows on the affected workspaces are mispositioned, e.g. placed
outside the workspace area. To fix, set the geometry on newly added
workspaces to the view's cached values.
https://bugzilla.gnome.org/show_bug.cgi?id=649001
Workspaces used to contain the desktop background, so when a
workspace was removed, we animated its actor to an off-screen
position before destroying it. As the background has been
removed a while ago, we can destroy the actor directly.
https://bugzilla.gnome.org/show_bug.cgi?id=645031
We used used to indicate to the user the ability to move to another workspace
during dnd by highligthing the adjacent workspaces on hover.
This was done by changing the workspace's opacity to 200 and set it to
255 for the highlighted adjacent ones.
This is now no longer needed as the design was completely changed since
then (overview relayout; we no longer represent workspaces in the way
we did before) and introduces a bug where we don't properly reset the
opacity after the drag action, so just remove that code.
https://bugzilla.gnome.org/show_bug.cgi?id=648983
We need to update WorkspacesView._ZoomOut before calling
_updateWorkspacesGeometry() in show(), as otherwise the old
value is kept. This was a problem if we previously left the
overview zoomed out.
Currently activating a window on a different workspace requires very
long drag distances, which is very inconvenient to use.
Fix that by allowing switching workspaces using the thumbnails which is
consistent with window and launcher dnd and much easier to use.
https://bugzilla.gnome.org/show_bug.cgi?id=643945
If there is a monitor to the right it is very easy to overshot the
expanding thumbnails and enter the next monitor. So, in that case
we just always show it.
https://bugzilla.gnome.org/show_bug.cgi?id=641877
When we were knocking off workspace height to fix the ratio problems, we
weren't adding spacing in between workspaces, so they smooshed up against
each other whenever we took height off, causing them to be visible.
We clip the entire WorkspacesDisplay to its allocation to avoid things
like the WorkspaceThumbnails sticking out of the primary monitor into
another monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
We used to do this only on automatic workspace switch, but that
doesn't work for the multiple monitors case where we want to reserve
space on the extra monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
We create a Workspace with a null metaWorkspace for each
non-primary monitor, showing the windows on these monitors.
These are saved in WorkspaceView.extraWorkspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
This means a bunch of windows will not be visible at all in the overview.
Those will be added back with per-screen workspaces on the non-primary
monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
Commit 0207f1f29b landed a new
way of zooming, but was causing all sorts of window positioning
weirdness because the positions were supposed to be working against
a proportional workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=644542
WorkspacesDisplay removes its dragMonitor in _dragEnd, but
this was never called in when a xdnd drag ended causing
dragMonitors to stack up and handling events multiple times.
Fix that by making sure that _dragEnd is called when xdnd ends.
https://bugzilla.gnome.org/show_bug.cgi?id=644642
We currently show the workspace in the overview in a rectangle
with the same aspect ratio as the screen. Originally this was
probably done since it showed the desktop, but we don't do this
anymore, and the positioning of the windows in the overview is
strictly a grid, so its not in any way related to monitor geometry.
Additionally, in the multihead case the screen aspect ratio is
very different from the overview monitor geometry, so a lot of
space is lost.
So, instead we just fill the entire inner rectangle of the overview
with the workspace. However, the way the zoom into and out of the
workspace right now is by scaling the workspace so that it covers
the entire monitor. This cannot really work anymore when the workspace
is a different aspect ratio. Furthermore the coordinates of the
window clone actors are of two very different types in the "original
window" case and the "window in a slot case". One is screen relative,
the other is workspace relative. This makes it very hard to compute
the cost of window motion distance in computeWindowMotion.
In order to handle this we change the way workspace actor positioning
and scaling work. All workspace window clone actors are stored in
true screen coordingates, both the original window positions and the
in-a-slot ones. Global scaling of the workspace is never done, we
just reposition everything in both the initial zoom and when the
controls appear from the side.
There is one issue in the initial and final animations, which is that
the clip region we normally have for the workspacesView will limit the
animation of the clones to/from the original positions, so we disable
the clip region during these animations.
https://bugzilla.gnome.org/show_bug.cgi?id=643786
When we animating the scale for the thumbnails, the border and
background should wrap around the current size of the thumbails.
The technique that we are using to animate the scale breaks that
since we don't animate the overall size of the thumbnails box -
we just animate our child actors within the allocation.
To fix this, switch from drawing the background by packing in another
container to drawing the background with a separate actor that
is under the other actors and allocated by our custom logic.
https://bugzilla.gnome.org/show_bug.cgi?id=641881
The scale we zoom to in the "zoomed out" mode depends on the width of the
controls area. Once we rescale the workspaces dynamically, we'll need to
update the zoom scale as we add and remove workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
We will change the workspace thumbnail size as we get more thumbnails; it doesn't
really make sense to always show 1/5 of the thumbnails how big or small they are,
so instead show a CSS-configurable length.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
Fix a bug in the computation of the zoomed-out scale and use a StBin
instead of an unnecessary StBoxLayout. Using the StBin will allow
correct width-for-height behavior for the controls.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
Add WorkspaceThumbnail.ThumbnailsBox to handle managing the array
of workspace thumbnails; the logic will get more complex as we add
scaling and animation.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
Intead of using a St.Group and tweening the position of the controls
actor, use a St.GenericLayout and tween a Javascript property. This
allows us to more reliably track the height of the overall workspace
display and propagate it to the controls actor.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
At the end of a drag operation, we would invoke the code to slide the
controls in (because we were no longer DND'ing and not hovering) and
then immediately afterwards invoke the code to slide it back out when
we got the ENTER event from the end of DND. While the immediately
overridden tween probably won't have any visible effect it's better
to avoid this, so wait to update the zoom state until BEFORE_REDRAW.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
With automatic workspace management, explicit controls to add and
remove workspaces are no longer necessary. We also can remove the
use of addWorkspace for middle-button-click on a launcher since
launching on the last empty workspace will do the right thing.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
With workspace thumbnails, we want to make workspace switching
something that happens largely under the users control, so don't
switch to newly added workspaces in the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
Add workspace thumbnails to the workspace controls area. The user can
click on the thumbnail to switch workspaces and can also drag windows
out of the thumbnail to other workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
Moving the base tracking of restacking to WorkspacesDisplay will allow
us to use it to update stacking in the workspace thumbnails as well as
in the main workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
Instead of having a separation between popping the controls out on hover
and zooming out for DND, always do both at once. This is necessary because
when we added workspace thumbnails the controls will get bigger, so we need
to make sure we zoom out far enough so that the windows don't overlap the
controls.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
When checking the type of a DND source, instead of checking
'instanceof Workspaces.WindowClone' accept any actor with realWindow
and metaWindow properties. This will be useful to support a separate
type of actor dragged from workspace thumbnails.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
The new plans for a row of workspace thumbnails on the right side of the
overview means that the mental model we present to the user will be
vertical, so switch the Metacity workspace layout to be vertical and
adjust the keybinding handling, animations, and workspace layout in
the overview to match.
(This commit does not change the workspace switching indicator pending
finalization of what we want to do with that - it still shows workspaces
arranged vertically.)
https://bugzilla.gnome.org/show_bug.cgi?id=640996
1. Both functions leaked the nodes in priv->children
2. st_container_remove_all wasn't properly updating first_child and last_child
3. remove_all() is almost never right since it won't cause signal handlers
on the children to be removed. In the rare cases where it might be needed
the caller can simply use clutter_container_remove().
https://bugzilla.gnome.org/show_bug.cgi?id=640781
The gnome-panel allows the user to hover over a tasklist entry
while draging to activate a minimized or obscured window and drop onto it.
Implement a similar behaviour by allowing draging to the activities button or
the hotcorner (and thus opening the overview), which allows the user to
activate any window (even on different workspaces) as a drop target.
https://bugzilla.gnome.org/show_bug.cgi?id=601731
Delegate the emission of the window-drag-begin/window-drag-end
signals to overview functions, as done already for other items.
This will enable objects to react to those signals without having
access to the workspace objects / the workspaces view.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
Add the view selector and adjust the positioning of elements in the
overview. Unlike the old dash, the view selector is made public to
indicate that extensions may add additional views or search providers.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
As workspaces will appear as a particular view in the view selector,
merge WorkspacesControls and WorkspacesManager to control workspaces
and related controls, so that a single actor can be added to the
selector instead of positioning the elements from the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
The new layout does no longer support view switching, so merge
GenericWorkspacesView and SingleView, and remove MosaicView.
Also rename or remove workspace properties and functions which
are now unused.
The grid will have a comeback with the new DND behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
