Implement support for synchronous subsurfaces commits. This means that
the client can, by calling wl_subsurface.set_sync, cause its surface
state to be commited not until its parent commits.
This will mean there will be will potentially be one more surface state
(regions, buffer) at the same time: the active surface state, the mutable
pending surface state, and the immutable surface state that was pending
on last surface commit.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=705502
The placement set by either wl_subsurface.place_above or
wl_subsurface.place_below should be applied when the parent surface
invokes wl_surface.commit.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=705502
The position set by wl_subsurface.set_position should be applied when
the parent surface invokes wl_surface.commit.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=705502
Don't allow a client to stack a subsurface next to a subsurface with
another parent, or to a non-parent non-subsurface surface.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=705502
This reverts commit ebe6e3180e.
This is wrong, as mutter's controlling TTY may not be the same
as the active VT, and in fact won't be in the case of systemd
spawning us.
The "correct" API for this is to use David Herrmann's
"Session Positions" system to switch to another VT:
http://lists.freedesktop.org/archives/systemd-devel/2013-December/014956.html
As logind can give us a new FD at any time when it resumes. Theoretically,
this is still technically wrong, as the MetaCursorTracker holds onto it.
We'll fix this after we port to logind.
When we have a new client, we potentially set the focus on one of its
surfaces when we map it but the client might not have called
wl_seat.get_keyboard/pointer yet. When it finally calls
get_keyboard/pointer we must then register its resource as the
focus_resource which means that we can only return early if
focus_resource is already set.
https://bugzilla.gnome.org/show_bug.cgi?id=719725
Otherwise clutter events don't have their source actor properly set
and we aren't able to determine the MetaWindow to which a given
keybinding applies.
https://bugzilla.gnome.org/show_bug.cgi?id=719724
Since subsurfaces won't have toplevel MetaWindowActors, we need to
use MetaSurfaceActor instead. These are embedded in the MetaWindowActor,
just like MetaShapedTexture was (in fact, MetaSurfaceActor now contains
a MetaShapedTexture)
Somebody could do:
$ mv my-evil-program mutter-wayland
$ PATH=.:$PATH mutter-launch mutter-wayland
It's not secure, and it's hard to test with, so just drop it for now
We'll be relying on logind to hand us permissions in the future.
We require a MetaWindow to properly implement some of the requests
for xdg_surface, so add a way to have an unmapped MetaWindow that
we can store properties on, that we later map when the client
attaches a buffer...
Rather than have MetaWaylandSeat do all the state management itself,
put the split between the root cursor and the window cursor in the
cursor tracker itself. We'll expand this to add a "grab" cursor in
the next commit, allowing us to force a cursor on grab operations.
In order to see all Clutter events, Mutter was previously installing a
signal handler on the ‘captured-event’ signal on the stage and
additionally using a signal emission hook to cope with grabs. This
changes it to use the new clutter_event_add_filter API so that we can
avoid the signal emission hook hack.
The plan is to make a new version of meta_display_handle_event that
will accept Clutter events instead of X events and then gradually move
over the events to the new function and finally remove the X version.
When X clients change the keyboard map, the also update a property
on the root window. We can notice that and rebuild our data structures
with the new values, as well as inform the wayland clients.
This is a terrible hack, and it's not how we want to implement things
in 3.12, but it's enough to have the same keyboard layout in the
shell, in X clients and in wayland clients in 3.10, until we decide
on the fate of the keyboard g-s-d plugin.
https://bugzilla.gnome.org/show_bug.cgi?id=707446
According to the wayland spec (A.14.1.5. wl_surface::set_opaque_region),
setting a NULL opaque region is possible and should cause the pending
opaque region to be set to empty. This implements the required
behavoir.
Also fixes set_input_region, which suffered from an analogous bug.
Previously the weston-simple-egl demo client caused mutter-wayland to
crash with a segfault in meta_wayland_surface_set_opaque_region, with
this patch it works as intended.
https://bugzilla.gnome.org/show_bug.cgi?id=711518
Grabs are now slice allocated structures that are handled by
whoever starts the grab. They contain a generic grab structure
with the interface and a backpointer to the MetaWaylandPointer.
The grab interface has been changed to pass full clutter events,
which allowed to remove the confusion between grab->focus and
pointer->focus. Invidual grabs are now required to keep their
focus, and choose whoever gets the events.
https://bugzilla.gnome.org/show_bug.cgi?id=707863
Once the sizing is properly wired up, we need to make sure that
the size at the initial map is correct, and not always 0, 0 because
the buffer is not yet converted into a CoglTexture by MetaShapedTexture,
otherwise we end up sending out configure events at 1 x 1.
To do so, we cache the surface type in the initial state until the
first commit.
https://bugzilla.gnome.org/show_bug.cgi?id=707401
To properly resize clients, we need to send them configure events
with the size we computed from the constraint system, and
then check if the new size they ask is compatible with
our expectation.
Note that this does not handle interactive resizing yet, it
merely makes the API calls work for wayland clients.
https://bugzilla.gnome.org/show_bug.cgi?id=707401
Using the new Cogl API to actually modeset (because we can't
use the DRM API directly without controlling buffer swap), we
can finally have a KMS monitor backend, which means full display
configuration when running on bare metal.
https://bugzilla.gnome.org/show_bug.cgi?id=706308
The API was changed during the patch review.
(Yes, we were depending on API which was sitting in a patch not
yet reviewed... you know, vertical integration!)
https://bugzilla.gnome.org/show_bug.cgi?id=707929
Add MIN(...) with the interface version actually implemented
to all resource constructor, so that we never risk seeing requests
we don't implement (and consequently segfault)
https://bugzilla.gnome.org/show_bug.cgi?id=707851
Replace the deprecated APIs with the modern variants (which
also give us full control on the versioning).
Also, note that we only support version 2 of wl_seat. Version
3 is for multiple pointer/keyboards for a client, but
we don't implement that yet. If a client requests version 3
of wl_seat or make a version 3 request, it will get a protocol error.
https://bugzilla.gnome.org/show_bug.cgi?id=707851
We can't rely on clutter's xkb_state, because that's updated
when events are pulled from the kernel, not when we see them.
Instead, use the new clutter API to get the full modifier state
from the event (which, as a side effect, also works when clutter
is using the X11 backend for running nested).
https://bugzilla.gnome.org/show_bug.cgi?id=706963
Use the new Clutter hook to make sure the pointer never enters
the dead area caused by the different monitor sizes.
You don't realize how much X is doing for you until you lose it...
https://bugzilla.gnome.org/show_bug.cgi?id=706655
Add a new interface, gtk_shell, than can be used by gtk to
retrieve a surface extension called gtk_surface, which will be
used to communicate with mutter all the GTK extensions to EWMH
https://bugzilla.gnome.org/show_bug.cgi?id=707128
Add support for GTK application menus
To do so, we need to be able to set surface state before creating
the MetaWindow, so we introduce MetaWaylandSurfaceInitialState as
a staging area.
The gtk-shell-surface implementation would either write to the
initial state, or directly to the window.
At the same, implement set_title and set_class too, because it's
easy enough.
https://bugzilla.gnome.org/show_bug.cgi?id=707128
According to the wayland documentation, damage outside the
window size is ignored.
This happened with xwayland+wlshm (causing a GL error when calling
TexSubImage2D), probably due to not resizing the buffer
until we receive the corresponding X event.
Might also be an off-by-one in xwayland, as the window size did
not actually change.
Note: we might want to take the configure_notify path instead,
and keep the GL/clutter size consistent with wayland rather than
X, because in the end that's what matters for events and composition.
https://bugzilla.gnome.org/show_bug.cgi?id=706289
The protocol specification says that opaque / input regions should be
considered pending state and should only be actually swapped out when
the surface is committed, so it can be set atomically.
We had an assertion in meta_wayland_surface_free() that after
a repick() we would not choose the freed surface, but that didn't
consider surfaces destroyed while holding the implicit pointer
grab (ie, because the user clicked on the X button). In that case,
we need to bypass the grab infrastructure and explicitly unfocus
the dead surface.
https://bugzilla.gnome.org/show_bug.cgi?id=706982
After a MetaWaylandSurface is associated with a MetaWindow, it
should be freed only when the MetaWindow is unmanaged. For wayland
clients, the window is unmanaged when the resource is destroyed,
but for X11 clients we want to wait for the unmap event.
https://bugzilla.gnome.org/show_bug.cgi?id=705917
Calling XIGrabDevice has no effect under wayland, because the
xserver is getting events from us. Instead, we need to use our
own interfaces for grabs.
At the same time, we can simplify the public API, as plugins
should always listen for events using clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=705917
We need to track the full xkb_state to have the necessary information
to send to the clients, otherwise they may get confused and lock
or invert the modifiers. In the evdev backend, we just retrieve the
same state object that clutter is using, while in the other backends
we fake the state using what clutter is providing (which is a subset
of what X11 provides, which would be necessary to have full state)
https://bugzilla.gnome.org/show_bug.cgi?id=705862
Now that we have a setuid launcher binary, we can make use of
using a private protocol through the socket we're passed at startup.
We also use the new hook in clutter-evdev to ask mutter-launch for
the FDs of the input devices we need, and we emulate the old X
DRM lock with a nested GMainContext without sources.
In the future, mutter-launch will be replaced with the new logind
API currently in development.
https://bugzilla.gnome.org/show_bug.cgi?id=705861
Set the TTY mode appropriately at startup, and clean it up
when the compositor exits. Also, take control of VT switching,
including the calls to drmSetMaster and drmDropMaster as appropriate.
In the future, we the kernel implements the mute evdev ioctl,
we'll also make sure that input devices are appropriately released.
https://bugzilla.gnome.org/show_bug.cgi?id=705861
Being a setuid binary, our LD_LIBRARY_PATH is cleared by glibc at
startup, but we need the spawned binary to see it, otherwise
jhbuild doesn't work, so hardcode it using the configured libdir.
https://bugzilla.gnome.org/show_bug.cgi?id=705861
Remove the ability to launch as a different user, which we don't
need because we're spawned by gdm or by the user manually on the
command line.
At the same time, require an active local session, and remove
the ability to run from anywhere by being in the right user group
(which automatically gives you root-like privileges)
https://bugzilla.gnome.org/show_bug.cgi?id=705861
To run mutter as a display server, one needs to acquire and
release the DRM master, which is only possible for root, so
we take advantage of weston-launch, a small setuid helper binary
written for the weston project. We import our own slightly
modified copy of it, because weston-launch only launches weston,
for security reasons.
https://bugzilla.gnome.org/show_bug.cgi?id=705861
We need to track the full xkb_state to have the necessary information
to send to the clients, otherwise they may get confused and lock
or invert the modifiers. In the evdev backend, we just retrieve the
same state object that clutter is using, while in the other backends
we fake the state using what clutter is providing (which is a subset
of what X11 provides, which would be necessary to have full state)
https://bugzilla.gnome.org/show_bug.cgi?id=705862
Under X, we need to use XFixes to watch the cursor changing, while
on wayland, we're in charge of setting and painting the cursor.
MetaCursorTracker provides the abstraction layer for gnome-shell,
which can thus drop ShellXFixesCursor. In the future, it may grow
the ability to watch for pointer position too, especially if
CursorEvents are added to the next version of XInput2, and thus
it would also replace the PointerWatcher we use for gnome-shell's
magnifier.
https://bugzilla.gnome.org/show_bug.cgi?id=705911
It is a very bad idea in a glib program (especially one heavily
using glib child watching facilities, like gnome-shell) to handle
SIGCHLD. While we're there, let's also use g_spawn_async, which
solves some malloc-after-fork problems and makes the code generally
cleaner.
https://bugzilla.gnome.org/show_bug.cgi?id=705816
The current surface refers to the surface right below the pointer
(according to the pick performed by clutter), while the focus surface
is the one receiving events. They can be out of sync in case of
grabs, in which case we should keep trying to focus the current
surface.
https://bugzilla.gnome.org/show_bug.cgi?id=706077
The previous code was leaving focus fields dirty in MetaWaylandPointer
and MetaWaylandKeyboard at time (which could crash the X server
because of invalid object IDs)
The new code is more tighly integrated in the normal X11 code
for handling keyboard focus (meaning that the core idea of input
focus is also correct now), so that meta_window_unmanage() can
do the right thing. As a side benefit, clicking on wayland clients
now unfocus X11 clients.
For the mouse focus, we need to clear the surface pointer when
the metawindowactor is destroyed (even if the actual actor is
kept alive for effects), so that a repick finds a different pointer
focus.
https://bugzilla.gnome.org/show_bug.cgi?id=705859
Remove window_surfaces, as the FIXME asks for. We don't need it
because we can obtain the surface from the MetaWindow, and
follow the wayland compositor path for both types of clients.
https://bugzilla.gnome.org/show_bug.cgi?id=705818
When running Mutter under Cogl's KMS backend no cursor will be
provided so instead this makes it so the cursor will be painted as a
CoglTexture that gets moved in response to mouse motion events. The
painting is done in a subclass of ClutterStage so that we can
guarantee that the cursor will be painted on top of everything else.
This patch adds support for the set_cursor method on the pointer
interface so that clients can change the cursor image.
The set_pointer method sets a surface and a hotspot position to use
for the cursor image. The surface's buffer is converted to a
CoglTexture and attached to a pipeline to paint directly via Cogl. If
a new buffer is attached to the surface the image will be updated. The
cursor reverts back to the default image whenever to the pointer focus
is moved off of any surface.
The image for the pointer is taken from X. It gets installed into
a fixed data location for mutter.
This copies the basic input support from the Clayland demo compositor.
It adds a basic wl_seat implementation which can convert Clutter mouse
events to Wayland events. For this to work all of the wayland surface
actors need to be made reactive.
The wayland keyboard input focus surface is updated whenever Mutter
sees a FocusIn event so that it will stay in synch with whatever
surface Mutter wants as the focus. Wayland surfaces don't get this
event so for now it will just give them focus whenever they are
clicked as a hack to test the code.
Authored-by: Neil Roberts <neil@linux.intel.com>
Authored-by: Giovanni Campagna <gcampagna@src.gnome.org>
This adds support for running mutter as a hybrid X and Wayland
compositor. It runs a headless XWayland server for X applications
that presents wayland surfaces back to mutter which mutter can then
composite.
This aims to not break Mutter's existing support for the traditional X
compositing model which means a single build of Mutter can be
distributed supporting the traditional model and the new Wayland based
compositing model.
TODO: although building with --disable-wayland has at least been tested,
I still haven't actually verified that running as a traditional
compositor isn't broken currently.
Note: At this point no input is supported
Note: multiple authors have contributed to this patch:
Authored-by: Robert Bragg <robert@linux.intel.com>
Authored-by: Neil Roberts <neil@linux.intel.com>
Authored-by: Rico Tzschichholz.
Authored-by: Giovanni Campagna <gcampagna@src.gnome.org>
