The default value of the ClutterShaderEffect:shader-type
property is CLUTTER_FRAGMENT_SHADER. However, because the
struct field is not actually initialized to it, it ends
up assuming the value 0, which is CLUTTER_VERTEX_SHADER.
Properly initialize ClutterShaderEffect's shader_type to
CLUTTER_FRAGMENT_SHADER.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/846
There are two common ways of building mutter: With both the native
backend and Wayland support (most common, used by most Linux distributions), and
without the native backend and Wayland support (as is done by some
BSD*s).
To catch compilation errors in both these common build configurations,
change the no-native-backend build phase to also not build with Wayland
support.
This also disables building mutter tests, as tests depend on Wayland to
run.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/837
Otherwise we'll get the warning
../src/core/main.c: In function 'meta_test_init':
../src/core/main.c:755:1: error: function might be candidate for attribute 'noreturn' [-Werror=suggest-attribute=noreturn]
755 | meta_test_init (void)
| ^~~~~~~~~~~~~~
when building without Wayland.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/837
If we did a mode set, the gamma may have been changed by the kernel, and
if we didn't also update the gamma in the same transaction, we have no
way to predict the current gamma ramp state. In this case, read the
gamma state directly from KMS.
This should be relatively harmless regarding the race conditions the
state prediction was meant to solve, as the worst case is we get none or
out of date gamma ramps; and since this is for when gamma ramps are not
updated at mode setting time, we'd get intermediate gamma state to begin
with, so it's not worse than what we currently do anyway.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/851https://gitlab.gnome.org/GNOME/mutter/merge_requests/840
Xkb events should be handled by clutter backend but they are not translated
into an actual clutter event. However we're now handling them and also trying
to push an empty event to clutter queue, causing a critical error.
So in such case, just handle the native event but don't push the non-populated
clutter-event to the queue.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/750https://gitlab.gnome.org/GNOME/mutter/merge_requests/764
A frame callback without damage is still expected to be responded to.
Implement this by simply queuing damage if there are any frame callbacks
requested and there is no damage yet. If there already is damage,
we'll be queued already, but with more correct damage. Without we simply
need to make sure we flush the callbacks if any area of surface is not
occluded.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/457https://gitlab.gnome.org/GNOME/mutter/merge_requests/839
It wasn't necessary (see other instances of -DG_LOG_DOMAIN) and somewhere
along the line it was getting turned into forward slashes becoming a syntax
error:
```
/usr/include/glib-2.0/gobject/gobject.h:767: syntax error, unexpected '/' in
...
g_assertion_message (/"CoglPango/",
```
https://gitlab.gnome.org/GNOME/mutter/merge_requests/841
The inhibited state of the monitor was after the initializiation never
updated. meta_idle_monitor_reset_idletime didn't respect the inhibited
state, so it set timeouts if it shouldn't have.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/573
For the most part, a MetaWindow is expected to live roughly as long as
the associated wl_surface, give or take asynchronous API discrepancies.
The exception to this rule is handling of reparenting when decorating or
undecorating a window, when a MetaWindow on X11 is made to survive the
unmap/map cycle. The fact that this didn't hold on Wayland caused
various issues, such as a feedback loop where the X11 window kept being
remapped. By making the MetaWindow lifetime for Xwayland windows being
the same as they are on plain X11, we remove the different semantics
here, which seem to lower the risk of hitting the race condition causing
the feedback loop mentioned above.
What this commit do is separate MetaWindow lifetime handling between
native Wayland windows and Xwayland windows. Wayland windows are handled
just as they were, i.e. unmanaged together as part of the wl_surface
destruction; while during the Xwayland wl_surface destruction, the
MetaWindow <-> MetaWaylandSurface association is simply broken.
Related: https://gitlab.freedesktop.org/xorg/xserver/issues/740
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/762https://gitlab.gnome.org/GNOME/mutter/merge_requests/774
ClutterActor took a reference in its transition 'stopped' handler,
aiming to keep the transition alive during signal emission even if it
was removed during. This is, however, already taken care of by
ClutterTimeline, by always taking a reference during its 'stopped'
signal emission, so no need to add another one.
This also has the bonus of making reference ownership simpler, as well
as avoidance of double free if an actor was destroyed before a
transition has finished.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/828
We get implicit, thus auto-removed, transitions, then manage them
manually by stopping them and emitting "completed" signals. This doesn't
work since they are removed and freed when stopped. To be able to emit
the "completed" signal, hold a reference while stopping, so that we
still can emit the signal as before.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/828
Implicit transitions had a referenced taken while emitting the
completion signals, but said reference would only be released if it was
had remove-on-complete set to TRUE.
Change this to instead remove the 'is_implicit' state and mark all
implicit transitions as remove-on-complete. This fixes a
ClutterPropertyTransition leak in gnome-shell triggered by e.g. showing
/ hiding menus.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1740https://gitlab.gnome.org/GNOME/mutter/merge_requests/828
Dropping the grab has the side effect that the pointer will be re-picked,
and it might find another surface with a pointer constraint. If that were
the case, the focus change would try to add the pointer constraint before
the now old focus surface released its own.
Just invert these operations, so the constraint is unset before the repick
that might enable another pointer constraint.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/779
Just like sync_focus_surface() does, we shouldn't set a focus surface while
the pointer is hidden, so the illusion that there is none remains.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/779
We can't just update the state of the connector and CRTC from KMS since
it might contain too new updates, e.g. from a from a future hot plug. In
order to not add ad-hoc hot plug detection everywhere, predict the state
changes by looking inside the MetaKmsUpdate object, and let the hot-plug
state changes happen after the actual hot-plug event.
This fixes issues where connectors were discovered as disconnected while
doing a mode-set, meaning assumptions about the connectedness of
monitors elsewhere were broken until the hot plug event was processed.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/782https://gitlab.gnome.org/GNOME/mutter/merge_requests/826
After commit 75cffd0e ("shaped-texture: Implement ClutterContent"), the
input to the meta_wayland_tablet_tool_get_relative_coordinates function
is already scaled correctly. By scaling it again, all stylus events are
getting mapped to the screen incorrectly (for anything != 100% scaling).
See also: d3f30d9ehttps://gitlab.gnome.org/GNOME/mutter/merge_requests/830
Correct silly mistake where the MetaWaylandSurface was passed as the
user_data of the surface actor destroy signal handler, instead of the
expected MetaWaylandActorSurface.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/844
Instead of storing the result of meta_prop_get_latin1_string() into
a temporary string value, g_strdup-ing that temp value storing the
g_strdup result into window->sm_client_id and then g_free-ing the
temporary string, we can pass window->sm_client_id as the place where
meta_prop_get_latin1_string() stores its result, since the result
from meta_prop_get_latin1_string() is itself a g_strdup-ed string,
so there is no need to g_strdup it again.
Note this drops the check to only issue the
"Window %s sets SM_CLIENT_ID on itself ..." warning once. This check is
not necessary as update_sm_hints() is only called once at window
creation time and is never called again.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/786
Use g_strdup instead of malloc + strcpy, this also gets rid of a bunch
of error checking which is no longer necessary, also adjust the free
path accordingly.
Note that there was a malloc + XFree mismatch in the removed error-handling.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/786
latin1_string_from_results and utf8_string_from_results use g_strndup,
so the returned string should be freed with g_free, rather then with
free or XFree. This fixes all free-s of buffers returned by these 2
functions to properly use g_free.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/786
Use g_new0 instead of calloc for motif_hints_from_results and adjust
its callers to use g_free.
Note that in the process_request_frame_extents function this replaces
the wrong original mismatch of calloc + XFree with a matching g_malloc +
g_free pair.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/786
The final version of the function was changed to allow points that are
touching the edge of a quadrilateral to be counted as "inside". Update
the function documentation to refect this.
Also clarify that the function is written in such a way that it is
agnostic to clockwise or anticlockwise vertex ordering.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/783
In `clutter_stage_view_blit_offscreen()`, the given clipping rectangle
is in “view” coordinates whereas we intend to copy the whole actual
framebuffer, meaning that we cannot use the clipping rectangle.
Use the actual framebuffer size, starting at (0, 0) instead.
That fixes the issue with partial repainting with shadow framebuffer
when fractional scaling is enabled.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/820
