All CoglBuffer constructors now take an explicit CoglContext
constructor. This is part of the on going effort to adapt to Cogl API so
it no longer depends on a global, default context.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When using COGL_DEBUG=wireframe we were overlaying a wireframe of the
users geometry over the top of what was drawn for each primitive. It
seems to be more useful though that if the wireframe debug option has
been enabled then we should draw only the wireframes instead of
overlaying them.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Since we are adapting the Cogl api to be less stateful one of the things
we no longer require is the cogl_set_source() api since a pipeline can
be explicitly passed as an argument when drawing. This means the term
"source" has been deprecated and internally we should aim to
consistently use the term "pipeline" instead. This patch updates the
journal code to use the term pipeline instead of source.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Although we internally had a COGL_DEBUG_WINSYS enum we weren't providing
a way to enable that via the COGL_DEBUG environment variable. This adds
a "winsys" option that can be used to enable printing of winsys debug
notes.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the display api
symbols.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds cogl_framebuffer_ apis for drawing attributes and primitives
that replace corresponding apis that depend on the default CoglContext.
This is part of the on going effort to adapt the Cogl api so it no
longer depends on a global context variable.
All the new drawing functions also take an explicit pipeline argument
since we are also aiming to avoid being a stateful api like Cairo and
OpenGL. Being stateless makes it easier for orthogonal components to
share access to the GPU. Being stateless should also minimize any
impedance miss-match for those wanting to build higher level stateless
apis on top of Cogl.
Note: none of the legacy, global state options such as
cogl_set_depth_test_enabled(), cogl_set_backface_culling_enabled() or
cogl_program_use() are supported by these new drawing apis and if set
will simply be silently ignored.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Previously when using the cogl_rectangle_* family of functions with a
pipeline that doesn't have a texture for a particular layer then
validate_tex_coords_cb would bail out immediately leaving the texture
coords for that layer uninitialised. This patch changes it so that it
bails out after copying in the texture coordinates instead. This was
causing problems for pipelines that were trying to completely generate
the texture values in a CoglSnippet because they wouldn't get any
texture coordinates.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This ensures we don't call swap buffer notify callback functions
immediately when they are received since it could be awkward for
applications to ensure they have dropped all necessary locks if they
don't know when callbacks might be invoked.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a cogl_kms_renderer_get_kms_fd() function that lets developers
access the kms file descriptor being used for controlling the kernel
mode setting.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The recent patch to add an api for explicitly constraining how a
renderer backend is chosen had a typo which this patch fixes.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When creating a texture from a wayland buffer we create an intermediate
EGLImage that we then create a GL texture from, but we were never
destroying that EGLImage. This patch ensures we destroy the image right
after we've created the texture so we don't leak a reference to the
underlying buffer.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Instead of having each winsys implement its own list of callbacks the
list is now just attached directly to the CoglOnscreen using code in
cogl-onscreen.c. The winsys's can invoke this list of callbacks by
calling _cogl_onscreen_notify_swap_buffers(). All of the winsys's
would probably have a very similar implementation for this anyway and
I don't think it makes much sense to try and save the cost of a list
pointer in the CoglOnscreen struct.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a public function to iterate the attributes of a
CoglPrimitive. Previously there was no way to query back the
attributes but there was methods to query back all of the other
properties.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a public function to make a copy of a primitive. The copy is
shallow which means it will share the same attributes and attribute
buffers. This could be useful for code that wants to have multiple
similar primitives with slightly modified properties.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
There was no other way to get a pointer to the texture attached to a
pipeline layer apart from the using the CoglMaterial API but I think
this was just an oversight so we should add this in. It is already
maked in the sections file for the gtk-doc.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Both the cogl_texture_get_data and _cogl_blit_begin implementations
will internally try to create an FBO for a texture and have fallbacks
if the FBO fails. However neither of them were catching errors when
allocating the framebuffer so the fallback wouldn't work properly.
This patch just adds an explicit call to cogl_framebuffer_allocate for
these uses and causes it to use the next fallback if it fails.
Based on a patch by Adel Gadllah.
https://bugzilla.gnome.org/show_bug.cgi?id=669368
Reviewed-by: Robert Bragg <robert@linux.intel.com>
When calling cogl_texture_get_data we need to ensure that any
framebuffers rendering to the texture have flushed their journals.
https://bugzilla.gnome.org/show_bug.cgi?id=668913
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of flushing the journal whenever the current framebuffer on a
context is changed it is now flushed whenever the framebuffer is about
to be destroyed instead. To do this it implements a custom unref
function which detects when there is going to be exactly one reference
on the framebuffer and then flushes its journal. The journal now
always has a reference on the framebuffer whenever it is non-empty.
That means the unref will only cause a flush if the only thing keeping
the framebuffer alive is the entries in the journal.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The virtual function gets called in cogl_object_unref. Any definition
of a CoglObject type can replace the default unref function by using
COGL_OBJECT_DEFINE_WITH_CODE to directly manipulate the
CoglObjectClass struct. The generated object constructors set the
pointer to the default implementation. The default implementation is
exported in the private header so that any overriding implementations
can chain up to it.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Unlike in GObject the type number for a CoglObject is entirely an
internal implementation detail so there is no need to make a GQuark to
make it safe to export out of the library. Instead we can just
directly use a fixed pointer address as the identifier for the type.
This patch makes it use the address of the class struct of the
identifier. This should make it faster to do type checks because it
does not need to call a function every time it wants to get the type
number.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This moves the pointer members of CoglObject to the top and the int
members to the bottom so that there won't be any padding inserted on
64-bit machines. This reduces the size of the struct from 80 bytes to
72.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Some GLSL-related function prototypes are GLES2-only: GL implementations
are not required to provide them.
While Mesa is perfectly happy to return a dummy function pointer for
functions it doesn't support, other platforms are more picky, and will
return NULL.
In this particular case, this commit fixes GLSL support on OSX.
https://bugzilla.gnome.org/show_bug.cgi?id=668856
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Resizing a wayland client framebuffer should not affect the viewport
of additional primitives drawn to that framebuffer before the next swap
buffers request nor should querying the framebuffer's width and height
be affected until the next swap buffers request completes.
This patch changes cogl_wayland_onscreen_resize() so it only saves the
new geometry as "pending" state internal to the given CoglOnscreen. Only
when cogl_framebuffer_swap_buffers() is next called will the pending
size be flushed to the wayland egl api.
We've avoiding using the redundant glib typedefs such as guint, gint
gpointer etc and prefer to use the equivalent C types so this patch
removes a few uses of gint that slipped past review.
This adds cogl_onscreen_template_set_swap_throttled() api that allows
developers to specify their preference for swap buffer throttling
up-front as part of the onscreen template that is used to create a
CoglDisplay when initializing Cogl. This is desirable because some
platforms may not support configuring swap throttling on a per
framebuffer basis and also since applications often want to apply the
same policy to all onscreen framebuffers anyway.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the matrix api
symbols.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the snippet api
symbols.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the cogl framebuffer
symbols.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the cogl.h symbols.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the onscreen
framebuffer api symbols.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the cogl-pipeline
symbols.
It proved to be inconvenient that we had a special CoglVector3 typedef
for vectors instead of just accepting pointers to float arrays because
you'd so often end up having to make awkward casts from another vector
type into a CoglVector3 and then cast back again. We're hoping that
taking float pointers instead will lead to less unnecessary casting.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the symbols in
cogl-renderer.h.
This allows applications to specify certain constraints that feed into
the process of selecting a CoglRenderer backend. For example
applications might depend on x11 for handling input and so they require
a backend that's also based on x11.
The shm buffer format enum values were renamed and the explicitly
premultiplied format was dropped since it's now assumed if the buffer
has an alpha component then it's premultiplied.
This function will call into the Wayland EGL platform API and resize the
surface that the window is using and update the internal dimensions for
framebuffer and viewport to reflect the change.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously the swap event notification feature was only accessible as
a winsys feature using the semi-internal
cogl_clutter_winsys_has_feature. This just adds a feature ID for it so
it can also be accessed via cogl_has_feature.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Originally we decided to use #define tricks to rename all experimental
symbols so that they had an _EXP suffix so it would be a bit clearer for
those wanting to check for ABI changes that they shouldn't worry about
these experimental symbols.
We feel now though that the defines are a bit more hassle than they are
really worth, since they are one extra thing to remember when coding,
they make using gdb slightly more awkward since you have to use the real
symbol name to set breakpoints and we already have a mechanism for
declaring symbols as experimental via gtk-doc that can be used by anyone
wanting to check for ABI changes.
Instead of just using a script to remove all the #defines we are going
to go through them manually because we need to make sure the symbols
are marked as unstable via gtk-doc. This patch does a first batch of
define removals and in fact some of the symbols didn't have any
documentation at all so that needed to be added too.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This workaround code has just been incrementally carried forward since
Cogl was integrated with Clutter but really we have no idea when this
code path was ever tested. Since the work around is from before the time
of the current Cogl developers we don't know anything about the
circumstances which led to this extreme workaround instead of pushing to
fix a driver.
It seems pretty likely we can push to fix any drm based drivers so
we're removing the workaround.
https://bugzilla.gnome.org/show_bug.cgi?id=667009
Reviewed-by: Neil Roberts <neil@linux.intel.com>
GCC will define __ARM_ARCH_4T__ when building with "-march=armv4t" so we
can check this to turn off the use of 'clz' instructions, which
otherwise would cause compile errors like "selected processor does not
support ARM mode `clz r3,r0'".
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
The GSource is created using cogl_glib_source_new which takes a
pointer to a CoglContext. The source calls cogl_poll_get_info() in its
prepare function and cogl_poll_dispatch() in its dispatch
function. The poll FDs on the source are updated according to what
Cogl reports.
The header is only included and the source only compiled if Cogl is
configured with GLib support.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously we relied on the application to send all X events through
Cogl using cogl_xlib_renderer_handle_event. This breaks the
abstraction that an application shouldn't need to know what winsys
Cogl is using. Now that we have main loop integreation in Cogl, the
Xlib-based winsys's can report that Cogl needs to block on the file
descriptor of the X connection and it can manually handle the
events.
The event retrieval can be disabled by an application if it calls the
new cogl_xlib_renderer_set_event_retrieval_enabled() function. The
event retrieval will also automatically be disabled if the application
sets a foreign display.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds two new functions:
void
cogl_poll_get_info (CoglContext *context,
CoglPollFD **poll_fds,
int *n_poll_fds,
gint64 *timeout);
void
cogl_poll_dispatch (CoglContext *context,
const CoglPollFD *poll_fds,
int n_poll_fds);
The application is expected to call the first function whenever it is
about to block to go idle, and the second function whenever it comes
out of idle. This gives Cogl winsys's the ability poll file
descriptors for events. For example when handing swap complete
notifications, it can report that it needs to block on a file
descriptor.
The two functions are backed by winsys virtual functions. There are
currently no implementations. The default handler for get_info just
reports no file descriptors and an infinite timeout.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This splits up cogl-ext-functions.h in to sets of prototypes that
can be included separately so that we can include just core
gles1 or gles2 functions without any extensions.
Since eglGetProcAddress can not be used to query core client APIs
and some implementations (notably on Android) can return a garbage
pointer instead of NULL this will allow us to explicitly check
when to use eglGetProcAddress and when to use dlsym().
Reviewed-by: Neil Roberts <neil@linux.intel.com>
If we need to realloc the uniforms overrides array for a pipeline to
insert a new override then we copy the old state into the new allocation
for the entries surrounding the inserted entry.
This patch fixes a mistake in how we copied the old entries that follow
the inserted entry since we were actually copying to begining of the new
allocation and potentially reading from beyond the extents of the old
allocation.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The foreach_sub_texture_in_region implementation tries to forward the
function on to its child texture but it was mistakenly forwarding back
on to itself so it would just recurse endlessly and crash.
The SDL winsys was missing a few minor features, such as the
implementation. This patch adds that in.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
CoglTexture2D had an assert to verify that the EGL winsys was being
used. This doesn't make any sense any more because the EGL winsys
can't be used directly but instead it is just a base winsys for the
platform winsys's. To fix this this patch adds a set of 'criteria'
flags to each winsys, one of which is 'uses EGL'. CoglTexture2D can
use this to determine if the winsys is supported.
Eventually we might want to expose these flags publically so that an
application can select a winsys based on certain conditions. For
example, an application may need a winsys that uses X or EGL but
doesn't care exactly which one it is.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Eventually we might want to have an XCB-based EGL winsys. We already
have xlib-specific API in CoglRenderer (eg, to set a foreign display)
so the application needs to be able to specifically select between XCB
and XLIB.
This also removes the POWERVR part while renaming
COGL_HAS_EGL_PLATFORM_POWERVR_X11_SUPPORT to
COGL_HAS_EGL_PLATFORM_XLIB_SUPPORT because the winsys is equally
applicable to Mesa.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This moves all of the code specific to the Android platform out of
cogl-winsys-egl. It is completely untested apart from that it
compiles using a dummy android/native_window.h header.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This moves all of the code specific to the gdl winsys out of
cogl-winsys-egl. It is completely untested apart from that it
compiles.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The egl_surface_width/height properties in CoglDisplayEGL were
accidentally being conditionally defined depending on KMS
support. They are not necessary because CoglDisplayKMS also already
stores the width/height and this was just copied over to the EGL
dipslay.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The GLX and EGL winsys backends had a check for when onscreen==NULL
in which case they would instead try to bind the dummy surface. This
wouldn't work however because it would have already crashed by that
point when it tried to get the Cogl context out of the onscreen. The
function needs a bit of refactoring before it could support this but
presumably nothing is relying on this anyway because it wouldn't work
so for now we can just remove it.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
CoglXlibDisplay just contained one member called dummy_xwin. This was
not shared outside of the respective winsys's so I don't think it
really makes sense to have a separate shared struct for it. It seems
more like an implementation detail that is specific to the winsys
because for example it may be that the EGL winsys could use the
surfaceless extension and not bother with a dummy window. This will
also make it easier to factor out the Xlib-specific data in
CoglDisplayEGL to the platform data.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously the Xlib renderer data was meant to be the first member of
whatever the winsys data is. This doesn't work well for the EGL winsys
because it only needs the Xlib data if the X11 platform is used. The
Xlib renderer data is now instead created on demand and connected to
the object using cogl_object_set_user_data. There is a new function to
get access to it.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of having #ifdefs to hook into the normal EGL winsys, the KMS
winsys now overrides any winsys functions that it wants. Where the
winsys wants to hook into a point within a function provided by the
EGL winsys there is a EGL-platform vtable which gets set on the EGL
renderer data during renderer_connect. The KMS-specific data on all of
the structures is now allocated separately by the KMS winsys and is
pointed to by a new 'platform' pointer in the EGL data.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The #ifdefs in cogl-winsys-egl have been changed so that they
additionally check renderer->winsys_vtable->id for the corresponding
winsys ID so that multiple EGL platforms can be enabled.
The is a stop-gap solution until we can move all of the EGL platforms
into their own winsys files with overrides of the EGL vtable. However
with this approach we can move one platform at a time which will make
it easier.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of just having an "EGL" renderer, there is now a separate
winsys for each platform. Currently they just directly copy the vtable
for the EGL platform so it is still only possible to have one EGL
platform compiled into Cogl. However the intention is that the
winsys-specific code for each platform will be moved into override
functions in the corresponding platform winsys.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Requests for the shell to manipulate it's state for the surface are now
abstracted through a wl_shell_surface object rather through wl_shell as
before.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
There are three separate EGL_KHR_surfaceless_* extensions depending on
which GL API is being used so we should probably check the right one
depending on which driver Cogl has selected.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
There were two problems stopping the KMS winsys from working with a
GLES2 driver:
• When creating the EGL context, it was missing the attribute to
select the client version so it would end up with the GLES1 API.
• When creating the depth buffer for the framebuffer it was using
GL_DEPTH_COMPONENT but only GL_DEPTH_COMPONENT16 is supported on
GLES. cogl-framebuffer already unconditionally uses this so it
probably makes sense to do the same here.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Pre-generate a .bat file to be used to generate the cogl-enum-types.[ch]
for the build process. This will greatly simplify the maintenace process
as the listing of headers to be parsed by glib-mkenums can be manifested
automatically during 'make dist', and this list changes quite a bit during
the development cycle.
Previously this header was only included on GLES2 but since 7283e0a4
the progend is used on any driver where GLSL is available. This
changes the #ifdef to check for the presence of the GLSL progend.
Based on a patch by Fan, Chun-wei
https://bugzilla.gnome.org/show_bug.cgi?id=665722
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This ensure that cogl_renderer_check_onscreen_template() doesn't call
winsys->renderer_connect() if the renderer has already been connected
as that can fail with some backends.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The compositor side wayland support enabling us to create textures from
wayland buffers needed updating since visuals were removed from the
wayland protocol.
This also fixes the #ifdef guards for the bind_wayland_display extension
in cogl-winsys-egl-feature-functions.h since it was mistakenly checking
that client-side wayland support had been enabled which won't be the
case.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Since the wayland protocol doesn't currently provide a way to
retrospectively query the interfaces that get notified when a client
first connects then when using a foreign display with Cogl then we also
need api for telling cogl what compositor and shell objects to use. We
already had api for setting a foreign compositor so this patch just adds
api for setting a foreign shell.
This patch also adds documentation for all the wayland specific apis.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The handler for the normal attribute was missing an else so presumably
it would have crashed on GLES2.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a documentation section for CoglSnippet which gives an
overview of how to use them. It also fixes some syntax errors in the
existing documentation and adds the missing pipeline functions for
adding snippets to the documentation sections file.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Both _cogl_bitmask_set_flags and _cogl_bitmask_set_flags_array have void
return types, so just execute _cogl_bitmask_set_flags_array without
returning that to elimate a compiler warning.
https://bugzilla.gnome.org/show_bug.cgi?id=665722
Reviewed-by: Neil Roberts <neil@linux.intel.com>
For some reason the EGL spec says that the surface passed to
eglSwapBuffers must be bound as the current surface for the swap to
work. Mesa validates that this is the case and returns an error from
the swap buffers call if not.
https://bugzilla.gnome.org/show_bug.cgi?id=665604
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously flushing the matrices was performed as part of the
framebuffer state. When on GLES2 this matrix flushing is actually
diverted so that it only keeps a reference to the intended matrix
stack. This is necessary because on GLES2 there are no builtin
uniforms so it can't actually flush the matrices until the program for
the pipeline is generated. When the matrices are flushed it would
store the age of modifications on the matrix stack so that it could
detect when the matrix hasn't changed and avoid flushing it.
This patch changes it so that the pipeline is responsible for flushing
the matrices even when we are using the GL builtins. The same
mechanism for detecting unmodified matrix stacks is used in all
cases. There is a new CoglMatrixStackCache type which is used to store
a reference to the intended matrix stack along with its last flushed
age. There are now two of these attached to the CoglContext to track
the flushed state for the global matrix builtins and also two for each
glsl progend program state to track the flushed state for a
program. The framebuffer matrix flush now just updates the intended
matrix stacks without actually trying to flush.
When a vertex snippet is attached to the pipeline, the GLSL vertend
will now avoid using the projection matrix to flip the rendering. This
is necessary because any vertex snippet may cause the projection
matrix not to be used. Instead the flip is done as a forced final step
by multiplying cogl_position_out by a vec4 uniform. This uniform is
updated as part of the progend pre_paint depending on whether the
framebuffer is offscreen or not.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a hook called COGL_SNIPPET_HOOK_TEXTURE_COORD_TRANSFORM.
This can be used to alter the application of the layer user matrix to
a texture coordinate or it can bypass it altogether.
This is the first per-layer hook that affects the vertex shader state
so the patch includes the boilerplate needed to get that to work.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously the function containing the default texture lookup is
always generated regardless of whether there is a snippet with a
replace string which would cause it not be used. Now this snippets are
all scanned to check for replace strings before generating the texture
lookup.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The variables caching the result of texture lookups and layer
calculations are now stored in global variables so that when a hook
for the layer processing is added the variables can still be accessed
even if the generated code is within a separate function.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The loop that generates code for a list of snippets now starts from
the first snippet that has a replace string. Any snippets before that
would be ignored so there's no point in generating code for them.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The function for generating the GLSL for a list of snippets was trying
to detect the last snippet so that it could use a different function
name. However this wouldn't work if the last snippet has a different
hook. To fix this it now just counts the snippets that have the same
hook beforehand and detects the last one using the count.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of specifying the hook point when adding to the pipeline using
a separate function for each hook, the hook is now a property of the
snippet. The hook is set on construction and is then read-only.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Whenever snippets are enabled we can't determine whether the final
color will be fully opaque so we just have to assume blending should
be enabled.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a per-layer snippet hook for the texure lookup. Here the
snippet can modify the texture coordinates used for the lookup or
modify the texel resulting from the lookup. This is the first
per-layer hook so this also adds the
COGL_PIPELINE_LAYER_STATE_FRAGMENT_SNIPPETS state and all of the
boilerplate needed to make that work.
Most of the functions used by the pipeline state to manage the snippet
list has been moved into cogl-pipeline-snippet.c so that it can be
shared with the layer state.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The two loops that generate the functions for the snippets in the
fragend and vertend are very similar so to avoid code duplication this
patch moves the logic to its own function in a new
cogl-pipeline-snippet.c file.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
If present, the 'replace' string will be used instead of whatever code
would normally be invoked for that hook point. It will also replace
any previous snippets.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Each snippet is now given its own function which contains the pre and
post strings. Between these strings the function will chain on to
another function. The generated cogl source is now stored in a
function called cogl_generated_source() which the last snippet will
chain on to. This should make it so that each snippet has its own
namespace for local variables and it can share variables declared in
the pre string in the post string. Hopefully the GLSL compiler will
just inline all of the functions so it shouldn't make much difference
to the compiled output.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds two new public experimental functions for attaching
CoglSnippets to two hook points on a CoglPipeline:
void cogl_pipeline_add_vertex_hook (CoglPipeline *, CoglSnippet *)
void cogl_pipeline_add_fragment_hook (CoglPipeline *, CoglSnippet *)
The hooks are intended to be around the entire vertex or fragment
processing. That means the pre string in the snippet will be inserted
at the very top of the main function and the post function will be
inserted at the very end. The declarations get inserted in the global
scope.
The snippets are stored in two separate linked lists with a structure
containing an enum representing the hook point and a pointer to the
snippet. The lists are meant to be for hooks that affect the vertex
shader and fragment shader respectively. Although there are currently
only two hooks and the names match these two lists, the intention is
*not* that each new hook will be in a separate list. The separation of
the lists is just to make it easier to determine which shader needs to
be regenerated when a new snippet is added.
When a pipeline becomes the authority for either the vertex or
fragment snipper state, it simply copies the entire list from the
previous authority (although of course the shader snippet objects are
referenced instead of copied so it doesn't duplicate the source
strings).
Each string is inserted into its own block in the shader. This means
that each string has its own scope so it doesn't need to worry about
name collisions with variables in other snippets. However it does mean
that the pre and post strings can't share variables. It could be
possible to wrap both parts in one block and then wrap the actual
inner hook code in another block, however this would mean that any
further snippets within the outer snippet would be able to see those
variables. Perhaps something to consider would be to put each snippet
into its own function which calls another function between the pre and
post strings to do further processing.
The pipeline cache for generated programs was previously shared with
the fragment shader cache because the state that affects vertex
shaders was a subset of the state that affects fragment shaders. This
is no longer the case because there is a separate state mask for
vertex snippets so the program cache now has its own hash table.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a CoglObject called CoglSnippet which will be used to store
strings used as GLSL snippets to be attached at hook points to a
CoglPipeline. The snippets can currently contain three strings:
declarations - This will be placed in the global scope and is intended
to be used to declare uniforms, attributes and
functions.
pre - This will be inserted before the hook point.
post - This will be inserted after the hook point.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
_cogl_framebuffer_flush_state needs to handle the case where
ctx->current_draw_buffer is NULL because this will be set in the
destructor for CoglFramebuffer if the framebuffer being destroyed is
the current framebuffer. This patch just makes it assume all state has
changed in that case.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This removes the limited caching of enabled attributes done by
_cogl_enable() and replaces it with a more generalized set of bitmasks
associated with the context that allow us to efficiently compare the set
of attribute locations that are currently enabled vs the new locations
that need enabling so we only have to inform OpenGL of the changes in
which locations are enabled/disabled.
This also adds a per-context hash table for mapping attribute names to
global name-state structs which includes a unique name-index for any
name as well as pre-validated information about builtin "cogl_"
attribute names including whether the attribute is normalized and what
texture unit a texture attribute corresponds too.
The name-state hash table means that cogl_attribute_new() now only needs
to validate names the first time they are seen.
CoglAttributes now reference a name-state structure instead of just the
attribute name, so now we can efficiently get the name-index for any
attribute and we can use that to index into a per-glsl-program cache
that maps name indices to real GL attribute locations so when we get
asked to draw a set of attributes we can very quickly determine what GL
attributes need to be setup and enabled. If we don't have a cached
location though we can still quickly access the string name so we can
query OpenGL.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We should not be deciding whether we need to really update the GL face
winding state at the point where a new framebuffer has been pushed, we
should be waiting until we have really been asked to flush some
framebuffer state otherwise we may do redundant work if multiple
framebuffers are pushed/popped before something is really drawn.
This integrates the face winding state tracking with the design we have
for handling most of the other framebuffer state so we benefit from the
optimizations for minimizing the cost of _cogl_framebuffer_flush_state()
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We should not be deciding whether we need to really update the GL color
mask state at the point where a new framebuffer has been pushed, we
should be waiting until we have really been asked to flush some
framebuffer state otherwise we may do redundant work if multiple
framebuffers are pushed/popped before something is really drawn.
This integrates the color mask state tracking with the design we have
for handling most of the other framebuffer state so we benefit from the
optimizations for minimizing the cost of _cogl_framebuffer_flush_state()
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Previously the cost of _cogl_framebuffer_state_flush() would always
scale by the total amount of state tracked by CoglFramebuffer even in
cases where we knew up-front that we only wanted to flush a subset of
the state or in cases where we requested to flush the same framebuffer
multiple times with no changes being made to the framebuffer.
We now track a set of state changed flags with each framebuffer and
track the current read/draw buffers as part of the CoglContext so that
we can quickly bail out when asked to flush the same framebuffer
multiple times with no changes.
_cogl_framebuffer_flush_state() now takes a mask of the state that we
want to flush and the implementation has been redesigned so that the
cost of checking what needs to be flushed and flushing those changes
now scales by how much state we actually plan to update.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
There was only one place where we called _cogl_clip_state_flush() in
_cogl_framebuffer_flush_state() and we can just as well use
_cogl_clip_state_get_stack() and _cogl_clip_stack_flush() directly
instead.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The only place we were calling _cogl_clip_stack_dirty() was when
changing the current draw_buffer which also implies a change in
the current clip stack. _cogl_clip_stack_flush() would already
be able to quickly determine that the clip stack has changed by
checking ctx->current_clip_stack so there isn't really any need
to explicitly mark the clip_stack state as dirty.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The aim is to make cogl-framebuffer.c responsible for avoiding redundant
flushing of its matrix stacks so this removes the checks done directly
within cogl-matrix-stack.c.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This update some of the cogl-matrix.h documentation to be consistent
with the corresponding documentation for framebuffer matrix-stack
methods in cogl-framebuffer.h
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This removes the use of _COGL_GET_CONTEXT() from cogl-matrix-stack.c
as part of the ongoing effort to evolve cogl to get rid of the need for
a default context.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
_cogl_path_fill_nodes_with_clipped_rectangle() sometimes falls back to
pushing a framebuffer clip region and filling the region using
cogl_rectangle(). Since we aim to eventually deprecate
cogl_clip_push_from_path() as it relies on the default CoglContext we
would rather this internal code update a framebuffer's clip-state using
the cogl_framebuffer clip stack api instead.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This updates some of the cogl2-clip-state.h cogl_clip_ API documentation
to make it consistent with the documentation for corresponding
framebuffer clip stack API in cogl-framebuffer.h
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This updates some of the cogl.h cogl_clip_ API documentation to make it
consistent with the documentation for corresponding framebuffer clip
stack API in cogl-framebuffer.h
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds CoglFramebuffer methods for accessing the clip stack. We plan
on making some optimizations to how framebuffer state is flushed which
will require us to track when a framebuffer's clip state has changed.
This api also ties in to the longer term goal of removing the need for a
default global CoglContext since these methods are all implicitly
related to a specific context via their framebuffer argument.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This ensures we don't touch a framebuffer's matrix stack directly if we
are also relying on _cogl_framebuffer_flush_state(). We want to get to
the point where we can set dirty flags against framebuffer state at the
point it changes but that means we can't allow direct access to the
matrix stack. _cogl_texture_draw_and_read() has now been changed so it
uses cogl_framebuffer_ methods to update the matrix stacks including
adding new internal _cogl_framebuffer_push/pop_projection() functions
that allow us to set transient projections.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a cogl_framebuffer_identity_matrix() method that can be used
to reset the current modelview matrix to the identity matrix.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This updates the cogl.h matrix stack documentation consistent with the
corresponding documentation in cogl-framebuffer.h for the framebuffer
matrix stack methods.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds cogl_framebuffer_ methods to update the modelview and
projection matrix stacks to replace functions like cogl_translate(),
cogl_rotate() and cogl_scale() etc.
This is part of the on-going effort to get rid of the global CoglContext
pointer since the existing methods don't take an explicit pointer to a
CoglContext. All the methods are now related to a context via the
framebuffer.
We added framebuffer methods instead of direct context methods because
the matrix stacks are per-framebuffer and as well as removing the global
CoglContext we would rather aim for a more direct state access API
design than, say, cairo or OpenGL, so we'd like to avoid needing the
cogl_push/pop_framebuffer(). We anticipate that Cogl will mostly be
consumed by middleware graphics layers such as toolkits or game engines
and feel that a more stateless model will avoid impedance mismatches if
higher levels want to expose a stateless model to their developers and
statefullness can still be added by higher levels if really desired.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds an experimental cogl_matrix_orthographic() function that is
more consistent with other Cogl api by taking x_1, y_1, x_2, y_2
arguments to define the top-left and bottom-right coordinates of the
orthographic coordinates instead of OpenGL style left, right, bottom and
top values.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This improves the documentation for cogl_texture_set_region() and
cogl_texture_set_region_from_bitmap() to explain that the region can't
be larger than the source data and also adds runtime assertions that
such a request isn't made.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The documentation for CoglPipelineCullFaceMode had a repeated typo with
"called" being used instead of "culled" which this fixes.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When saving the CRTC we were trying to use a struct member for the encoder
that wasn't valid at that point in time - instead use the local variable.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
_cogl_pipeline_init_multi_property_sparse_state was missing a break in
the case statement handling uniforms. This doesn't yet matter because
it is the last one handled anyway but it will bite someone later.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
We were missing various platform header includes in
cogl-winsys-egl-private.h when building support for non KMS egl
platforms.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
For example when building on windows we don't want to require EGL
headers when compiling cogl-renderer.c or cogl-texture-2d.c so we make
sure not to include cogl-winsys-egl-private.h if we aren't supporting
EGL.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
A small, pedantic change to remove the use of redundant gint and GLuint
types instead of int and unsigned int.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a check for the EGL_KHR_surfaceless_opengl extension which we
depend on for being able to MakeCurrent (NO_SURFACE) as well as create a
context without and EGLConfig.
Reviewed-by: Rob Bradford <rob@linux.intel.com>
Since _cogl_winsys_kms_display_setup was basically just calling
setup_kms() it made sense to fold the code of setup_kms() back into the
_cogl_winsys_kms_display_setup() function.
Reviewed-by: Rob Bradford <rob@linux.intel.com>
So that the various internal Cogl*EGL typedefs can be available to
cogl-winsys-kms.c this moves them into cogl-winsys-egl-private.h
Reviewed-by: Rob Bradford <rob@linux.intel.com>
To start with this backend only supports creating a single CoglOnscreen
framebuffer and will automatically set is up to display fullscreen on
the first suitable crtc it can find.
To compile this backend - get some dribbly black candles, sacrifice a
goat and configure with: --enable-kms-egl-platform
Note: There is currently a problem with using GLES2 with this winsys
so you need to run with EGL_DRIVER=gl
Note: If you have problems with mesa crashing in XCB during
eglInitialize then you may need to explicitly run with EGL_PLATFORM=gbm
Reviewed-by: Robert Bragg <robert@linux.intel.com>
When building with MSVC, symbols to be exported that point to data
need to be marked with dllimport to be successfully imported. The
_cogl_debug_flags variable is currently exported because it is used
from cogl-pango. This patch adds a COGL_EXPORT macro to cogl-util.h
which is used in cogl-debug.h
Based on a patch by Chun-wei Fan
https://bugzilla.gnome.org/show_bug.cgi?id=650020
Reviewed-by: Robert Bragg <robert@linux.intel.com>
These are the VS 2008/2010 project files to build Cogl, with a README.txt
to explain the process involved.
Note that the Cogl and Cogl-Pango projects (and filters for VS2010) are
expanded with the correct source file listings during "make dist", which
is done to simplify maintenance of these project files.
-added preconfigured config.h(.win32.in), which is expanded with the
correct versioining info during autogen
-added preconfigued cogl/cogl-defines.h.win32
-added symbols files for cogl and cogl-pango
-Have configure.ac expand the config.h.win32.in into config.h.win32
with the correct versioning info, etc, and to include the Visual C++
project files for distribution
-Added rules in cogl/Makefile.am to expand the cogl VS 2008/2010 projects
and filters from the templates with up-to-date source file listings, to
distribute cogl-enum-types.c, cogl-enum-types.h to ease compilation and
to avoid depending on PERL on Windows installations.
-Added rules in cogl-pango/Makefile.am to expand the cogl-pango VS2008/
2010 projects and filters from the templates with up-to-date source file
listings.
-Added/edited various Makefile.am's in build to distribute the VS2008/2010
project files and associated items required for the build.
-Update .gitignore. There needs to be a pre-configured
config.h(.win32) and its template, config.h.win32.in for Visual C++
builds
https://bugzilla.gnome.org/show_bug.cgi?id=650020
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When comparing uniform values, it was not correctly handling the case
where pipeline0 has the value set but pipeline1 does not (only the
other way around) so it would crash.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Deal with c99ism... I know it's not pretty, but it is the way
to go with non-c99 compilers. That's life...
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
When the flags contain a value that only has the most-significant bit
set then ffsl will return the size of an unsigned long. According to
the C spec it is undefined what happens when shifting by a number
greater than or equal to the size of the left operand. On Intel (and
probably others) this seems to end up being a no-op so the iteration
breaks. To fix this we can split the shift into two separate
shifts. We always need to shift by at least one bit so we can put this
one bit shift into a separate operator.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The uniform names are now stored in a GPtrArray instead of a linked
list. There is also a hash table to speed up converting names to
locations.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously the uniform overrides were stored in a linked list. Now
they are stored in a g_malloc'd array. The values are still tightly
packed so that there is only a value for each uniform that has a
corresponding bit in override_mask. The allocated size of the array
always exactly corresponds to the number of bits set in the
override_mask. This means that when a new uniform value is set on a
pipeline it will have to grow the array and copy the old values
in. The assumption is that setting a value for a new uniform is much
less frequent then setting a value for an existing uniform so it makes
more sense to optimise the latter.
The advantage of using an array is that we can quickly jump to right
boxed value given a uniform location by doing a population count in
the bitmask for the number of bits less than the given uniform
location. This can be done in O(1) time whereas the old approach using
a list would scale by the number of bits set.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This returns a population count of all the bits that are set in the
bitmask.
There is now also a _cogl_bitmask_popcount_upto which counts the
number of bits set up to but not including the given bit index. This
will be useful to determine the number of uniform overrides to skip if
we tightly pack the values in an array.
The test-bitmask test has been modified to check these two functions.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds the following new public experimental functions to set
uniform values on a CoglPipeline:
void
cogl_pipeline_set_uniform_1f (CoglPipeline *pipeline,
int uniform_location,
float value);
void
cogl_pipeline_set_uniform_1i (CoglPipeline *pipeline,
int uniform_location,
int value);
void
cogl_pipeline_set_uniform_float (CoglPipeline *pipeline,
int uniform_location,
int n_components,
int count,
const float *value);
void
cogl_pipeline_set_uniform_int (CoglPipeline *pipeline,
int uniform_location,
int n_components,
int count,
const int *value);
void
cogl_pipeline_set_uniform_matrix (CoglPipeline *pipeline,
int uniform_location,
int dimensions,
int count,
gboolean transpose,
const float *value);
These are similar to the old functions used to set uniforms on a
CoglProgram. To get a value to pass in as the uniform_location there
is also:
int
cogl_pipeline_get_uniform_location (CoglPipeline *pipeline,
const char *uniform_name);
Conceptually the uniform locations are tied to the pipeline so that
whenever setting a value for a new pipeline the application is
expected to call this function. However in practice the uniform
locations are global to the CoglContext. The names are stored in a
linked list where the position in the list is the uniform location.
The global indices are used so that each pipeline can store a mask of
which uniforms it overrides. That way it is quicker to detect which
uniforms are different from the last pipeline that used the same
CoglProgramState so it can avoid flushing uniforms that haven't
changed. Currently the values are not actually compared which means
that it will only avoid flushing a uniform if there is a common
ancestor that sets the value (or if the same pipeline is being flushed
again - in which case the pipeline and its common ancestor are the
same thing).
The uniform values are stored in the big state of the pipeline as a
sparse linked list. A bitmask stores which values have been overridden
and only overridden values are stored in the linked list.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
