Writing tests' output to a log file makes them difficult to debug when
the test might be running on an autobuilder or CI system where only
stdout/stderr are recorded. This is particularly troublesome if a
failure is only reproducible on a particular autobuilder.
Recent Automake versions have the convention that detailed output from
failing tests is written to stdout/stderr, not just to log files, when
the VERBOSE environment variable is set; borrow that convention as a
trigger for producing detailed test output.
This was originally cogl!14, but applies equally to mutter's fork of cogl.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1273
Signed-off-by: Simon McVittie <smcv@debian.org>
This resolves a couple of FIXMEs. The FIXME comments were right in
stating that not *all* journals needed flushing, only the one we
are trying to put on screen needs flushing.
However we can't eliminate all flushes because the winsys swap calls
that follow go directly into OpenGL which knows nothing about cogl
journalling. So the journal *must* be flushed before the swap, to give
OpenGL the correct state.
P.S. If this turns out to cause any bugs then the next best answer is
to just remove the FIXME comments. Because flushing is still the right
thing to do.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1362
Even when a direct client buffer has a compatible format, stride and
modifier for direct scanout, drmModePageFlip() may still fail sometimes.
From testing, it has been observed that it may seemingly randomly fail
with ENOSPC, where all subsequent attempts later on the same CRTC
failing with EBUSY.
Handle this by falling back to flipping after having composited a full
frame again.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1410
When the CoglRenderer didn't set the DMA buffer constructor vfunc, we
return NULL. What we didn't do was set the error, meaning the caller
would crash if it tried to look up why DMA buffer construction failed.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1430
This will be used when screencasting monitors so that if
there's scanout in place, it'll still be possible to blit
it to a PipeWire-owned framebuffer, and stream it.
Add a new 'blit_to_framebuffer' vfunc to CoglScanout, and
implement it in MetaDrmBufferGbm.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1421
In certain situations it's desirable to keep pipelines around for
the whole lifetime of the session. In order to not leak them and
properly clean them up on shutdown, introduce a new mechanism to
create named pipelines that are bound to their correstponding
context and may be used across file boundries.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1372
In order to support the DRM formats DRM_FORMAT_ABGR16161616F and
friends, as well as the wl_shm formats WL_SHM_FORMAT_ABGR16161616F and
friends, cogl needs to have knowledge about said formats too.
We don't have a software implementation of the half point data types
however, so the pack/unpack methods remain unimplemented. We don't need
them for now, so it's not crucial that we add them.
For the GLES2 driver, currently only two formats are supported, and
since we don't currently have pack/unpack implementations, the other
formats will for now remain unsupported, until we have a half float
implementation.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/804
In the case of indirect rendering like the first frame to use mutter's
background wallpaper:
Texture_A -> FBO_B (Texture_B) -> FBO_C (screen)
we would be trying to render the contents of both FBO_B and FBO_C in
the same flush, before the contents of Texture_A had made it to FBO_B.
So when FBO_C wants to use mipmaps of Texture_B they didn't exist yet
and appeared all black. And the blackness would remain for subsequent
frames as cogl has now decided the mipmaps of FBO_B are no longer
"dirty" and don't need refreshing:
FBO_B (Texture_B) (mipmaps_dirty==FALSE but black) -> FBO_C (screen)
We must flush FBO_B before referencing Texture_B for use in rendering
FBO_C. This only happens when Texture_A changes (e.g. when the user
changes their background wallpaper) so there's no ongoing performance
penalty from this flush.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1347
The native backend had a plain counter, and the X11 backend used the
CoglOnscreen of the screen; change it into a plain counter in
ClutterStageCogl. This also moves the global frame count setting to the
frame info constuctor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
We currently have mutter set a global frame counter on the frame info in
the native backend, but in order to do this from clutter, change the
frame info construction from being implicitly done so when swapping
buffers to having the caller create the frame info and passing that to
the swap buffers call.
While this commit doesn't introduce any other changes than the API, the
intention is later to have the caller be able to pass it's own state
(e.g. the global frame count) along with the frame info.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The property is deprecated and the current implementation simply
redirects it to ClutterActor::background-color, so remove it.
Also update the tests to set the background color directly.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1332
_cogl_shader_set_source_with_boilerplate and _cogl_shader_compile_real
have enough GL assumptions that it makes sense to push them into the
backend. Taken together their only callers are under driver/gl, so.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1194
This had been an entirely-too-GL-aware collection of renderer queries,
mostly to work around driver bugs and handle software drivers
intelligently. The driver workarounds have been removed (fix your
driver, and if you can't because it's closed-source, fix that first),
and we now delegate the am-i-software-or-not logic to the backend, so
this can all go
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1194
We delegate the answer through CoglDriverVtable::is_hardware_accelerated
since this is properly a property of the renderer, and not something the
cogl core should know about. The answer given for the nop driver is
admittedly arbitrary, yes it's infinitely fast but no there's not any
"hardware" making it so.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1194
If a test is not expected to succeed, then running it could be considered
to be a waste of resources, particularly if the failure might manifest
as an indefinite hang (see cogl!11), or if the test is likely to dump core
and trigger "expensive" crash-reporting mechanisms like systemd-coredump,
corekeeper, abrt or apport.
Skip the tests that are expected to fail. They can still be requested via
an environment variable, which can be set after fixing a bug to check which
tests are now passing.
Originally cogl!15, adapted for mutter's fork of cogl to use gboolean
instead of CoglBool.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1272
Signed-off-by: Simon McVittie <smcv@debian.org>
When r is 128 or more, running tests compiled with the undefined behaviour
sanitizer (ubsan) reports:
test-utils.c:312:45: runtime error: left shift of 128 by 24 places cannot be represented in type 'int'
which indeed it cannot. Force the type to be unsigned 32-bit so that we
get defined behaviour.
Similarly, in test-atlas-migration, the left-shifted guint8 is promoted
to int, which again does not have enough non-sign bits available to
left-shift a value >= 128 by 24 bits. Again, force the shift to be done
in unsigned 32-bit space.
This was originally cogl!22, but applies equally to mutter's fork of cogl.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1271
Signed-off-by: Simon McVittie <smcv@debian.org>
According to the cogl_bitmap_new_for_data documentation, the data is not
copied, so the application must keep the buffer alive for the lifetime
of the CoglBitmap. Freeing it too early led to a use-after-free in the
cogl unit tests. With that fixed, the test passes, so remove the known
failure annotation.
This AddressSanitizer trace is from the original cogl, but the bug and
fix apply equally to mutter's fork of cogl:
==6223==ERROR: AddressSanitizer: heap-use-after-free on address 0x62100001a500 at pc 0x7f3e2d4e7f4e bp 0x7ffcd9c41f30 sp 0x7ffcd9c416e0
READ of size 4096 at 0x62100001a500 thread T0
#0 0x7f3e2d4e7f4d (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x96f4d)
#1 0x7f3e260c7f6b in util_copy_box ../src/gallium/auxiliary/util/u_surface.c:131
#2 0x7f3e268c6c10 in u_default_texture_subdata ../src/gallium/auxiliary/util/u_transfer.c:67
#3 0x7f3e26486459 in st_TexSubImage ../src/mesa/state_tracker/st_cb_texture.c:1480
#4 0x7f3e26487029 in st_TexImage ../src/mesa/state_tracker/st_cb_texture.c:1709
#5 0x7f3e26487029 in st_TexImage ../src/mesa/state_tracker/st_cb_texture.c:1691
#6 0x7f3e2644bdba in teximage ../src/mesa/main/teximage.c:3105
#7 0x7f3e2644bdba in teximage_err ../src/mesa/main/teximage.c:3132
#8 0x7f3e2644d84f in _mesa_TexImage2D ../src/mesa/main/teximage.c:3170
#9 0x7f3e2cd1f7df in _cogl_texture_driver_upload_to_gl driver/gl/gl/cogl-texture-driver-gl.c:347
#10 0x7f3e2ccd441b in allocate_from_bitmap driver/gl/cogl-texture-2d-gl.c:255
#11 0x7f3e2ccd441b in _cogl_texture_2d_gl_allocate driver/gl/cogl-texture-2d-gl.c:462
#12 0x7f3e2ce3a6c0 in cogl_texture_allocate cogl/cogl-texture.c:1398
#13 0x7f3e2ce3e116 in _cogl_texture_pre_paint cogl/cogl-texture.c:359
#14 0x7f3e2cdee177 in _cogl_pipeline_layer_pre_paint cogl/cogl-pipeline-layer.c:864
#15 0x7f3e2cd574af in _cogl_rectangles_validate_layer_cb cogl/cogl-primitives.c:542
#16 0x7f3e2cdd742f in cogl_pipeline_foreach_layer cogl/cogl-pipeline.c:735
#17 0x7f3e2cd5c8b0 in _cogl_framebuffer_draw_multitextured_rectangles cogl/cogl-primitives.c:658
#18 0x7f3e2cd60152 in cogl_rectangle cogl/cogl-primitives.c:858
#19 0x5570a71ed6a0 in check_texture tests/conform/test-premult.c:103
#20 0x5570a71ed946 in test_premult tests/conform/test-premult.c:159
#21 0x5570a71df0d6 in main tests/conform/test-conform-main.c:58
#22 0x7f3e2bcd809a in __libc_start_main ../csu/libc-start.c:308
#23 0x5570a71e0869 in _start (/home/smcv/src/debian/cogl/tests/conform/.libs/test-conformance+0x33869)
0x62100001a500 is located 0 bytes inside of 4096-byte region [0x62100001a500,0x62100001b500)
freed by thread T0 here:
#0 0x7f3e2d5581d7 in __interceptor_free (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x1071d7)
#1 0x5570a71ed58b in make_texture tests/conform/test-premult.c:69
previously allocated by thread T0 here:
#0 0x7f3e2d558588 in malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x107588)
#1 0x7f3e2d384500 in g_malloc ../../../glib/gmem.c:99
This was originally cogl!12.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1274
Signed-off-by: Simon McVittie <smcv@debian.org>
