Commit Graph

123 Commits

Author SHA1 Message Date
Robert Bragg
5985eef44c Fully integrates CoglMaterial throughout the rest of Cogl
This glues CoglMaterial in as the fundamental way that Cogl describes how to
fill in geometry.

It adds cogl_set_source (), which is used to set the material which will be
used by all subsequent drawing functions

It adds cogl_set_source_texture as a convenience for setting up a default
material with a single texture layer, and cogl_set_source_color is now also
a convenience for setting up a material with a solid fill.

"drawing functions" include, cogl_rectangle, cogl_texture_rectangle,
cogl_texture_multiple_rectangles, cogl_texture_polygon (though the
cogl_texture_* funcs have been renamed; see below for details),
cogl_path_fill/stroke and cogl_vertex_buffer_draw*.

cogl_texture_rectangle, cogl_texture_multiple_rectangles and
cogl_texture_polygon no longer take a texture handle; instead the current
source material is referenced. The functions have also been renamed to:
cogl_rectangle_with_texture_coords, cogl_rectangles_with_texture_coords
and cogl_polygon respectivly.

Most code that previously did:
  cogl_texture_rectangle (tex_handle, x, y,...);
needs to be changed to now do:
  cogl_set_source_texture (tex_handle);
  cogl_rectangle_with_texture_coords (x, y,....);

In the less likely case where you were blending your source texture with a color
like:
  cogl_set_source_color4ub (r,g,b,a); /* where r,g,b,a isn't just white */
  cogl_texture_rectangle (tex_handle, x, y,...);
you will need your own material to do that:
  mat = cogl_material_new ();
  cogl_material_set_color4ub (r,g,b,a);
  cogl_material_set_layer (mat, 0, tex_handle));
  cogl_set_source_material (mat);

Code that uses the texture coordinates, 0, 0, 1, 1 don't need to use
cog_rectangle_with_texure_coords since these are the coordinates that
cogl_rectangle will use.

For cogl_texture_polygon; as well as dropping the texture handle, the
n_vertices and vertices arguments were transposed for consistency. So
code previously written as:
  cogl_texture_polygon (tex_handle, 3, verts, TRUE);
need to be written as:
  cogl_set_source_texture (tex_handle);
  cogl_polygon (verts, 3, TRUE);

All of the unit tests have been updated to now use the material API and
test-cogl-material has been renamed to test-cogl-multitexture since any
textured quad is now technically a test of CoglMaterial but this test
specifically creates a material with multiple texture layers.

Note: The GLES backend has not been updated yet; that will be done in a
following commit.
2009-01-27 14:26:39 +00:00
Robert Bragg
3d07e34cc5 Merge commit 'origin/master' into cogl-material
Conflicts:

	clutter/clutter-texture.c
	clutter/cogl/cogl-texture.h
	clutter/cogl/cogl.h.in
	clutter/cogl/common/Makefile.am
	clutter/cogl/gl/Makefile.am
	clutter/cogl/gles/Makefile.am
	clutter/cogl/gles/cogl-gles2-wrapper.c
	clutter/cogl/gles/cogl-gles2-wrapper.h
2009-01-23 15:23:49 +00:00
Neil Roberts
634cdeab1f Fix some failures from the fixed-to-float script in cogl-texture
The script converted calls to COGL_FIXED_MUL(x,y) to (x*y). However
this fails for cases like this:

 COGL_FIXED_MUL(a + b, c)

which become

 (a + b * c)

The meaning of this is of course different because multiplication has
a higher precedence than addition.

This was causing breakages in cogl_texture_quad_sw when the vertex
coordinates are not in increasing order. This was the case in
test-backface-culling when NPOTs are not available.
2009-01-22 17:44:24 +00:00
Owen W. Taylor
f409b58e89 Fix computation of camera distance
Compute the value of the camera distance as exactly half the xx
component of the projection matrix. The heuristically derived
value for 60 degrees was off by about 0.016%, causing noticeable
blurring, and other field of view angles which didn't have the
heuristic adjustment off by much more.

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2009-01-22 14:17:16 +00:00
Emmanuele Bassi
c9739e6aef Change the COGL texture constructor to use flags
Boolean arguments for functions are pretty evil and usually
lead to combinatorial explosion of parameters in case multiple
settings are added.

In the case of the COGL texture constructors we have a boolean
argument for enabling the auto-mipmapping; it is conceivable that
we might want to add more settings for a COGL texture without
breaking API or ABI compatibility, so the boolean argument should
become a bitmask.

The internals have not been changed: instead of checking for
a non-zero value, we check for a bitmask being set.
2009-01-21 10:14:29 +00:00
Robert Bragg
e338245827 Renames the mesh api to the "vertex buffer api".
This better reflects the fact that the api manages sets of vertex attributes,
and the attributes really have no implied form. It is only when you use the
attributes to draw that they become mesh like; when you specify how they should
be interpreted, e.g. as triangle lists or fans etc. This rename frees up the
term "mesh", which can later be applied to a concept slightly more fitting.
E.g. at some point it would be nice to have a higher level abstraction that
sits on top of cogl vertex buffers that adds the concept of faces. (Somthing
like Blender's mesh objects.) There have also been some discussions over
particle engines, and these can be defined in terms of emitter faces; so some
other kind of mesh abstraction might be usefull here.
2009-01-20 22:29:35 +00:00
Robert Bragg
a2cf7e4a19 [Automatic fixed-to-float.sh change] Applies a number fixed to float patches
To deal with all the corner cases that couldn't be scripted a number of patches
were written for the remaining 10% of the effort.

Note: again no API changes were made in Clutter, only in Cogl.
2009-01-20 16:20:54 +00:00
Robert Bragg
e82f656590 [Automatic fixed-to-float.sh change] Applies all scripted changes
This is the result of running a number of sed and perl scripts over the code to
do 90% of the work in converting from 16.16 fixed to single precision floating
point.

Note: A pristine cogl-fixed.c has been maintained as a standalone utility API
      so that applications may still take advantage of fixed point if they
      desire for certain optimisations where lower precision may be acceptable.

Note: no API changes were made in Clutter, only in Cogl.

Overview of changes:
- Within clutter/* all usage of the COGL_FIXED_ macros have been changed to use
the CLUTTER_FIXED_ macros.

- Within cogl/* all usage of the COGL_FIXED_ macros have been completly stripped
and expanded into code that works with single precision floats instead.

- Uses of cogl_fixed_* have been replaced with single precision math.h
alternatives.

- Uses of COGL_ANGLE_* and cogl_angle_* have been replaced so we use a float for
angles and math.h replacements.
2009-01-20 16:20:54 +00:00
Robert Bragg
616c082a7c Merge commit 'origin/master' into cogl-material
Conflicts:

	clutter/clutter-texture.c
	clutter/cogl/cogl-texture.h
	clutter/cogl/gles/cogl-context.c
	clutter/cogl/gles/cogl-context.h
2009-01-13 13:37:38 +00:00
Emmanuele Bassi
946c075a2a Merge branch 'master' into async-textures 2009-01-12 14:43:53 +00:00
Emmanuele Bassi
ed991fe3c5 Declare G_LOG_DOMAIN for COGL
In order to get properly namespaced debug and warning messages
inside COGL code we need to define the G_LOG_DOMAIN macro.
2009-01-12 11:21:06 +00:00
Chris Lord
2cea22e6a0 Update/clean and apply the async-texture patch from bug #1144 2009-01-07 17:02:43 +00:00
Neil Roberts
805b88d4c0 Merge branch multiple-texture-rectangle into master
Bug 1289 - Draw multiple glyphs at once

The multiple-texture-rectangle branch adds a new Cogl texture function
called cogl_texture_multiple_rectangles which is used to draw multiple
rectangles out of a texture using a single GL call. This is
significantly faster than drawing the rectangles with individual calls
on some platforms. The Pango renderer now uses this to speed up
rendering.

The conflicts are just due to the whitespace fixes in cb569a5.

Conflicts:

	clutter/cogl/gl/cogl-context.c
	clutter/cogl/gl/cogl-context.h
	clutter/cogl/gl/cogl-texture.c
2009-01-07 16:25:26 +00:00
Neil Roberts
12ea2933bd [cogl-material] Restore the GL_TEXTURE_ENV_MODE after material_rectangle
The rest of Cogl expects the texture mode to be GL_MODULATE so it
needs to be restored after calling cogl_material_rectangle. Otherwise
cogl_texture_rectangle will fail to blend with the Cogl color properly
and all of the labels will be black.
2009-01-06 18:24:57 +00:00
Neil Roberts
606d34f2aa [cogl-material] Make the user_tex_coords parameter of _rectangle const
The array is only used for input so it should be const.
2009-01-06 16:09:55 +00:00
Neil Roberts
f5288b1918 Add cogl-material.h and cogl-matrix.h to libclutterinclude_HEADERS
Otherwise they won't get installed
2009-01-06 15:53:35 +00:00
Robert Bragg
377f114046 [cogl-material] improvements for cogl_material_rectangle
The API has been changed to take an explicit length for the number of
texture coordinates passed, and it's now documented that if there are
more layers to the current material than the number of texture coords
passed, then default coordinates will be generated for the other
layers.

cogl_material_rectangle should now handle the case where a single
sliced texture is supplied as a material layer by falling back to
cogl_texture_rectangle. We are nearly at the point that
cogl_texture_rectangle could be deprecated. A few issues remain
though, such as not considering waste in cogl_material_rectangle.
2008-12-24 01:35:33 +00:00
Robert Bragg
462c45da3c [cogl-material] Some improvements for how we sync CoglMaterial state with OpenGL
This flattens the three functions: cogl_material_flush_gl_material_state,
.._flush_gl_alpha_func and .._flush_gl_blend_func into one:
cogl_flush_material_gl_state which doesn't takes a material handle. (the handle
is instead taken from the context.)

This has allows us to avoid re-submitting some state to OpenGL when the
material has not been replaced.

Note: Avoiding redundant state changes for material layers isn't dealt with
in this patch.
2008-12-24 01:33:23 +00:00
Robert Bragg
bb938ac4ff Merge branch 'master' into cogl-material
Conflicts:

	clutter/cogl/gl/cogl-context.c
	clutter/cogl/gl/cogl-context.h
2008-12-24 00:59:13 +00:00
Robert Bragg
cb569a5443 White space clean up across a number of files (only removing trailing spaces)
Removed trailing white space from the following files:
- clutter-clone-texture.c
- clutter-texture.c
- clutter-texture.h
- cogl/cogl-texture.h
- cogl/gl/cogl-context.c
- cogl/gl/cogl-texture.c
- cogl/gl/cogl-context.h
2008-12-24 00:48:32 +00:00
Robert Bragg
40b0bb4e95 Adds a CoglMaterial abstraction, which includes support for multi-texturing
My previous work to provide muti-texturing support has been extended into
a CoglMaterial abstraction that adds control over the texture combine
functions (controlling how multiple texture layers are blended together),
the gl blend function (used for blending the final primitive with the
framebuffer), the alpha function (used to discard fragments based on
their alpha channel), describing attributes such as a diffuse, ambient and
specular color (for use with the standard OpenGL lighting model), and
per layer rotations. (utilizing the new CoglMatrix utility API)

For now the only way this abstraction is exposed is via a new
cogl_material_rectangle function, that is similar to cogl_texture_rectangle
but doesn't take a texture handle (the source material is pulled from
the context), and the array of texture coordinates is extended to be able
to supply coordinates for each layer.

Note: this function doesn't support sliced textures; supporting sliced
textures is a non trivial problem, considering the ability to rotate layers.
Note: cogl_material_rectangle, has quite a few workarounds, for a number of
other limitations within Cogl a.t.m.
Note: The GLES1/2 multi-texturing support has yet to be updated to use
the material abstraction.
2008-12-22 16:35:52 +00:00
Robert Bragg
ea643ca0f8 [multi-texturing] This adds a new cogl_multi_texture API for GL,GLES1 + GLES2
Multitexturing allows blending multiple layers of texture data when texturing
some geometry. A common use is for pre-baked light maps which can give nice
lighting effects relativly cheaply. Another is for dot-3 bump mapping, and
another is applying alpha channel masks.

The dot-3 bump mapping would be really nice one day, but currently cogl doesn't
support lighting so that's not dealt with in this patch.

notable limitations:
- It can only texture rectangles a.t.m - and like cogl_texture_rectangle there
is no support for rotated texturing.
- Sliced textures are not supported. I think I've figured out how to handle
layers with different slice sizes at least for rectangular geometry, but I'm
not sure how complex it becomes once rotations are possible and texturing
arbitrary cogl_polygons.
- Except for this new API, cogl still doesn't know about more than one texture
unit, and so has no way of caching any enables related to other units. So that
things don't break it's currently necessary to disable anything to do with
additional units as soon as we are done with them which isn't ideal.
- No clutter API yet.
2008-12-22 16:35:51 +00:00
Neil Roberts
e21fee39b4 Merge commit 'git-svn' into multiple-texture-rectangle 2008-12-10 12:25:25 +00:00
Neil Roberts
dc6545ccd1 * clutter/cogl/gl/cogl.c:
* clutter/cogl/gl/cogl-defines.h.in:
	* clutter/cogl/gl/cogl-context.h:
	* clutter/cogl/common/cogl-mesh.c: Rename the glBufferDataSub
	function to glBufferSubData. When calling glXGetProcAddress with
	the former Mesa returns a stub dispatch function which will
	segfault if you try to use it. With NVIDIA it returns NULL so
	_cogl_features_init decides the card doesn't have VBO support.
2008-12-10 12:13:20 +00:00
Neil Roberts
9537f8e4ae Use a single index array
There's no point in clearing the index array because it is always the
same sequence of indices regardless of the vertices. Instead it is
just added to when there are more vertices than ever before.
2008-12-09 18:03:29 +00:00
Neil Roberts
8fc949bfaf Minor fix to indentation in gl/cogl-texture.c 2008-12-09 15:01:10 +00:00
Neil Roberts
bf72b8cdc3 Use glDrawRangeElements to share vertices
When drawing a quad from cogl_texture_multiple_rectangles share two of
the vertices in each triangle by using indices.
2008-12-09 13:02:28 +00:00
Neil Roberts
bafcfca797 Merge commit 'git-svn' into multiple-texture-rectangle
Conflicts:

	clutter/cogl/gl/cogl-texture.c
2008-12-04 18:20:57 +00:00
Neil Roberts
e3f077d55f Use the correct length in _cogl_texture_flush_vertices
The check for whether there are any rectangles to flush was using the
wrong value so it would always flush.

Thanks to Johan Bilien for spotting.
2008-12-04 17:50:03 +00:00
Neil Roberts
98035e4d8a Bug 1297 - Bring back support for GL_ARB_texture_rectangle
* clutter/cogl/gl/cogl-texture.c (cogl_texture_new_from_foreign,
	(_cogl_texture_quad_hw, cogl_texture_polygon),
	(_cogl_texture_quad_sw): Support GL_ARB_texture_rectangle textures

	* clutter/glx/clutter-glx-texture-pixmap.c: Use rectangle textures
	when NPOTs are not available or it is forced by the
	CLUTTER_PIXMAP_TEXTURE_RECTANGLE environment variable.

	* clutter/cogl/gl/cogl.c (cogl_enable): Allow enabling
	GL_TEXTURE_RECTANGLE_ARB.
2008-12-04 17:24:33 +00:00
Neil Roberts
89e7552ca3 Bug 1172 - Disjoint paths and clip to path
* clutter/cogl/cogl-path.h:
	* clutter/cogl/common/cogl-primitives.c:
	* clutter/cogl/common/cogl-primitives.h:
	* clutter/cogl/gl/cogl-primitives.c:
	* clutter/cogl/gles/cogl-primitives.c: Changed the semantics of
	cogl_path_move_to. Previously this always started a new path but
	now it instead starts a new disjoint sub path. The path isn't
	cleared until you call either cogl_path_stroke, cogl_path_fill or
	cogl_path_new. There are also cogl_path_stroke_preserve and
	cogl_path_fill_preserve functions.

	* clutter/cogl/gl/cogl-context.c:
	* clutter/cogl/gl/cogl-context.h:
	* clutter/cogl/gles/cogl-context.c:
	* clutter/cogl/gles/cogl-context.h: Convert the path nodes array
	to a GArray.

	* clutter/cogl/gl/cogl-texture.c:
	* clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure

	* clutter/cogl/common/cogl-clip-stack.c:
	* clutter/cogl/common/cogl-clip-stack.h: Simplified the clip
	stack code quite a bit to make it more maintainable.  Previously
	whenever you added a new clip it would go through a separate route
	to immediately intersect with the current clip and when you
	removed it again it would immediately rebuild the entire clip. Now
	when you add or remove a clip it doesn't do anything immediately
	but just sets a dirty flag instead.

	* clutter/cogl/gl/cogl.c:
	* clutter/cogl/gles/cogl.c: Taken away the code to intersect
	stencil clips when there is exactly one stencil bit. It won't work
	with path clips and I don't know of any platform that doesn't have
	eight or zero stencil bits. It needs at least three bits to
	intersect a path with an existing clip. cogl_features_init now
	just decides you don't have a stencil buffer at all if you have
	less than three bits.

	* clutter/cogl/cogl.h.in: New functions and documentation.

	* tests/interactive/test-clip.c: Replaced with a different test
	that lets you add and remove clips. The three different mouse
	buttons add clips in different shapes. This makes it easier to
	test multiple levels of clipping.

	* tests/interactive/test-cogl-primitives.c: Use
	cogl_path_stroke_preserve when using the same path again.

	* doc/reference/cogl/cogl-sections.txt: Document the new
	functions.
2008-12-04 13:45:09 +00:00
Neil Roberts
55cec1f651 Bug 1305 - NPOT textures unaligned to a pixel sometimes have
border artifacts

	* clutter/cogl/gl/cogl-texture.c: Set the wrap mode of a texture
	on demand

	Instead of setting the wrap mode once per texture at creation, it
	is now changed whenever the texture is drawn. The previous value
	is cached so that it isn't changed if the value is the same.

	This is used in _cogl_texture_quad_hw to only enable GL_REPEAT
	mode when the coordinates are not in the range [0,1]. Otherwise it
	can pull in pixels from the other edge when the texture is
	rendered off-pixel.
2008-12-01 16:27:54 +00:00
Neil Roberts
29505dd0ba Use GL_TRIANGLES for the texture vertex array
Most cards don't actually support GL_QUADS and they are deprecated in
GL 3.0 so there is a chance it will perform faster with GL_TRIANGLES
even though it has to submit two extra vertices.
2008-11-28 14:20:07 +00:00
Neil Roberts
b312cd2d55 Add cogl_texture_multiple_rectangles
This takes an array of sets of 8 floats to describe the rectangles. It
tries to send the geometry with a single glDrawArrays as far as
possible. cogl_texture_rectangle is now just a wrapper around
cogl_texture_multiple_rectangles.
2008-11-28 13:09:04 +00:00
Neil Roberts
10942e8e04 Make cogl_texture_rectangle use the vertex array
cogl_texture_quad_hw and _sw now just add vertices to the vertex
array. The last texture used is stored and if a different texture is
encountered then flushes the vertices. cogl_texture_rectangle always
flushes the vertices after calling either of the functions.
2008-11-28 12:33:19 +00:00
Neil Roberts
93ea1681bb Use a GArray for the texture vertices in cogl_texture_polygon
Previously it was a dynamic array that was manually reallocated.
2008-11-27 16:44:39 +00:00
Neil Roberts
ce189e7d77 * clutter/cogl/gl/cogl-texture.c (cogl_texture_rectangle): Fixed
the test for whether to use hardware tiling. Previously it assumed
	that texture coordinates are in increasing order but this is not
	the case since bug 1057 was fixed. The texture coordinates are now
	sorted later. It also allowed negative coordinates which doesn't
	make sense if the texture has waste.
2008-11-26 16:35:25 +00:00
Neil Roberts
8ff85615b3 * clutter/cogl/gl/cogl-texture.c (cogl_texture_polygon): Fix the
equation for calculating texture coordinates when using sliced
	textures. This became broken in revision 3520.
2008-11-24 12:27:48 +00:00
Neil Roberts
21617cc0f1 Bug 1271 - mingw compiling failed: undefined reference to
`_glDrawRangeElements@24'

	Resolve glDrawRangeElements with cogl_get_proc_address instead of
	calling it directly because functions defined in GL > 1.1 are not
	directly exported under Windows.

	* clutter/cogl/common/cogl-mesh.c: Use the function pointer from
	the context

	* clutter/cogl/gl/cogl-context.c (cogl_create_context): Initialise
	function pointer.

	* clutter/cogl/gl/cogl-context.h (CoglContext): Add a function
	pointer

	* clutter/cogl/gl/cogl-defines.h.in: Add a typedef for the
	function pointer.

	* clutter/cogl/gl/cogl.c (_cogl_features_init): Resolve
	glDrawRangeElements
2008-11-21 16:18:58 +00:00
Robert Bragg
39aa5c27b5 A comparison of gl/cogl-texture.c and gles/cogl-texture.c, to reduce
differences and improve maintainability.

	* clutter/cogl/gl/cogl-context.h:
	Adds a CoglTextureGLVertex typedef + texture_vertices and
	texture_vertices_size members to CoglContext for using vertex arrays
	like GLES does

	* clutter/cogl/gl/cogl-context.c:
	Initializes texture_vertices + texture_vertices_size members

	* clutter/cogl/gl/cogl-internal.h:
	Adds COGL_ENABLE_COLOR_ARRAY

	* clutter/cogl/gl/cogl.c:
	Add COGL_ENABLE_COLOR_ARRAY support to cogl_enable

	* clutter/cogl/gles/cogl-context.h:
	Change the CoglTextureGLVertex to use GLfloat for the position
	and texture coord attributes and GLubyte for the color.

	* clutter/cogl/gles/cogl-texture-private.h:
	Adds a wrap_mode member like GL has.

	* clutter/cogl/gl/cogl-texture.c
	* clutter/cogl/gles/cogl-texture.c:
	Improves the comparability of the files, such that the remaining
	differences, better reflect the fundamental differences needed
	between GL and GLES. Notably GL no longer uses glBegin/glEnd for
	submitting vertices, it uses vertex arrays like GLES and this gives
	a small but measurable fps improvement for test-text.
2008-11-18 16:24:09 +00:00
Robert Bragg
41ec02c8b5 * clutter/cogl/gl/cogl-internal.h
* clutter/cogl/gles/cogl-internal.h:
	Removes semicolon after the GE() macro since that breaks using it as a
	single statement.
2008-11-18 16:23:40 +00:00
Emmanuele Bassi
837d17aefc 2008-11-18 Emmanuele Bassi <ebassi@linux.intel.com>
* clutter/cogl/cogl-shader.h: Add a function for setting an
	integer uniform, similar to cogl_program_uniform_1f().

	* clutter/cogl/gl/cogl-program.c: Implement the GL version
	of cogl_program_uniform_1i().

	* clutter/cogl/gles/cogl-program.c: Implement the GLES version
	of cogl_program_uniform_1i().
2008-11-18 15:21:02 +00:00
Emmanuele Bassi
af0cb47570 2008-11-18 Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1049 - Clutter doesn't support most GLSL uniforms (patch
	by Chris Lord and Neil Roberts)

	* README: Update release notes.

	* clutter/Makefile.am:
	* clutter/clutter-shader-types.[ch]: Add GValue types for
	shader values.

	* clutter/clutter-actor.[ch]: Update the shader API to use
	the newly added GValue support for GLSL shader uniform
	setters.

	* clutter/clutter-shader.[ch]: Add float and integer convenience
	API for single value GLSL uniform setters.

	* clutter/cogl/cogl-shader.h: Add new uniform setters.

	* clutter/cogl/gl/cogl-context.c:
	* clutter/cogl/gl/cogl-context.h:
	* clutter/cogl/gl/cogl-defines.h.in:
	* clutter/cogl/gl/cogl-program.c:
	* clutter/cogl/gl/cogl.c: Update the GL implementation of COGL
	to handle the GLSL uniform setters.

	* clutter/cogl/gles/cogl-gles2-wrapper.c:
	* clutter/cogl/gles/cogl-gles2-wrapper.h:
	* clutter/cogl/gles/cogl-internal.h:
	* clutter/cogl/gles/cogl-program.c: Update the GLES 2.0 implementation
	of COGL to handle the GLSL uniform setters.

	* doc/reference/clutter/clutter-sections.txt:
	* doc/reference/cogl/cogl-sections.txt: Update the documentation.

	* tests/interactive/test-fbo.c:
	* tests/interactive/test-shader.c: Update the shader tests.
2008-11-18 15:08:40 +00:00
Emmanuele Bassi
c823bf9c83 2008-11-12 Emmanuele Bassi <ebassi@linux.intel.com>
* clutter/cogl/cogl-color.h:
	* clutter/cogl/cogl-path.h:
	* clutter/cogl/cogl-types.h:
	* clutter/cogl/common/cogl-color.c: Deprecated cogl_color()
	in favour of cogl_set_source_color() and friends; store the
	CoglColor components as unsigned bytes instead of fixed point
	normalized values; add functions for allocating, copying and
	freeing CoglColor, for use of language bindings.

	* clutter/cogl/cogl.h.in:
	* clutter/cogl/cogl-deprecated.h: Added cogl-deprecated.h,
	an header file containing the deprecation symbols similar
	to clutter-deprecated.h.

	* clutter/cogl/gl/Makefile.am:
	* clutter/cogl/gl/cogl-texture.c:
	* clutter/cogl/gl/cogl.c:
	* clutter/cogl/gles/Makefile.am:
	* clutter/cogl/gles/cogl-texture.c:
	* clutter/cogl/gles/cogl.c: Update the GL and GLES implementations
	of COGL after the CoglColor changes.

	* clutter/clutter-actor.c:
	* clutter/clutter-clone-texture.c:
	* clutter/clutter-entry.c:
	* clutter/clutter-label.c:
	* clutter/clutter-rectangle.c:
	* clutter/clutter-texture.c: Do not use CoglColor whenever it
	is possible, and use cogl_set_source_color4ub() instead.

	* clutter/pango/cogl-pango-render.c: Ditto as above.

	* doc/reference/clutter/subclassing-ClutterActor.xml:
	* doc/reference/cogl/cogl-sections.txt: Update the documentation.

	* tests/interactive/test-cogl-offscreen.c:
	* tests/interactive/test-cogl-primitives.c:
	* tests/interactive/test-cogl-tex-convert.c:
	* tests/interactive/test-cogl-tex-foreign.c:
	* tests/interactive/test-cogl-tex-getset.c:
	* tests/interactive/test-cogl-tex-polygon.c:
	* tests/interactive/test-cogl-tex-tile.c:
	* tests/interactive/test-paint-wrapper.c: Drop the usage of
	CoglColor whenever it is possible.
2008-11-12 13:57:58 +00:00
Neil Roberts
0ff710d37b Bug 1057 - cogl_texture_rectangle doesn't support backward
coordinates

	* clutter/cogl/gl/cogl-texture.c: Instead of sorting the vertex
	and texture coordinates passed to cogl_texture_rectangle, just
	swap both sets whenever the texture coordinates are backward.
2008-11-12 13:03:09 +00:00
Neil Roberts
f59da4d7a4 * clutter/cogl/gles/Makefile.am (libclutterinclude_HEADERS):
* clutter/cogl/gl/Makefile.am (libclutterinclude_HEADERS):
	* clutter/cogl/common/Makefile.am
	(libclutter_cogl_common_la_SOURCES): Move cogl-mesh.h into the
	headers for libclutter so that it will get installed.
2008-11-12 12:08:44 +00:00
Robert Bragg
16897e0729 Bug 1164 - Implements the proposed Mesh API
* clutter/cogl/cogl-mesh.h
	* clutter/cogl/cogl-types.h
	* clutter/cogl/cogl.h.in
	* clutter/cogl/common/Makefile.am
	* clutter/cogl/common/cogl-mesh-private.h
	* clutter/cogl/common/cogl-mesh.c
	* clutter/cogl/gl/cogl-context.c
	* clutter/cogl/gl/cogl-context.h
	* clutter/cogl/gl/cogl-defines.h.in
	* clutter/cogl/gl/cogl.c
	* clutter/cogl/gles/cogl-context.c
	* clutter/cogl/gles/cogl-context.h
	* doc/reference/cogl/cogl-docs.sgml
	* doc/reference/cogl/cogl-sections.txt:
	The Mesh API provides a means for submitting an extensible number of
	per vertex attributes to OpenGL in a way that doesn't require format
	conversions and so that the data can be mapped into the GPU (in vertex
	buffer objects) for - hopefully - fast re-use.

	There are a number of things we can potentially use this API for, but
	right now this just provides a foundation to build on. Please read
	the extensive list of TODO items in cogl-mesh.c for examples.

	Please refer to the cogl-mesh section in the reference manual for
	documentation of the API.

	* tests/conform/Makefile.am
	* tests/conform/test-conform-main.c
	* tests/conform/test-mesh-contiguous.c
	* tests/conform/test-mesh-interleved.c
	* tests/conform/test-mesh-mutability.c:
	Privides basic coverage testing for the mesh API.
2008-11-10 18:53:14 +00:00
Neil Roberts
a15ae21bd2 * clutter/cogl/gl/cogl.c (cogl_perspective): Use the accurate
64-bit multiplication macro instead of COGL_FIXED_FAST_DIV for
	calculating xmax as was done previously. This fixes
	test-perspective and other tests that had a gone a bit skewiff.
2008-11-04 12:43:06 +00:00
Emmanuele Bassi
e3788338e4 2008-11-03 Emmanuele Bassi <ebassi@linux.intel.com>
* clutter/cogl/gl/Makefile.am: Whitespace fixes.

	* clutter/cogl/gles/Makefile.am: Put back a missing backslash
	that broke the GLES build.
2008-11-03 23:58:13 +00:00
Emmanuele Bassi
90f4b1d492 2008-10-30 Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1219 - Clean up cogl.h

	* clutter/cogl/cogl.h.in:
	* clutter/cogl/cogl-offscreen.h:
	* clutter/cogl/cogl-path.h:
	* clutter/cogl/cogl-shader.h:
	* clutter/cogl/cogl-texture.h:
	* clutter/cogl/cogl-types.h: Split up the massive cogl.h file
	into sub-header for each section of the API.

	* clutter/cogl/gl/*:
	* clutter/cogl/gles/*: Update the GL and GLES implementations
	of COGL to cope with the new header structure.

	* doc/reference/cogl/Makefile.am: Fix symbol retrieval.
2008-10-30 17:25:00 +00:00