A few calculations and assignments are done unnecessarily when the
last next presentation time is invalid. This increases the cognitive
complexity of the function for no reason.
No change in behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2486>
When moving to another monitor the window size may change in some
cases. While unconditionally notifying a size change is not always
correct, it animates the window when moved to another monitor in
GNOME Shell.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2558>
Following the EGL_KHR_swap_buffers_with_damage specification, the
surface damage used by eglSwapBuffersWithDamage does not need to
contain the damage history.
Rework that to initialize swap_region earlier, before appending the
damage history.
This may help optimizing the composition process in some cases (at least
on X11 when EGL_KHR_swap_buffers_with_damage is available) by not
accumulating additional regions as damaged unnecessarily.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2241>
This is what the protocol says we should do, and even though normally
an out of focus client should not have any reason to create IM requests,
there is a bit of a grey area around focus changes, as both the client
losing focus and the client gaining focus may respectively try to
disable/enable in an undetermined order.
Anyways, since in that situation the client losing focus is not aware
of the requests being ignored, the serial should always be incremented
in order not to break accounting of .done/.commit for that specific
client.
Fixes the IM focus being possibly "lost" after changing focus between
clients, if the race condition turned the odds in that direction.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2585>
Mutter can play sounds in some contexts and also provides an API
for libmutter users to do so using libcanberra internally.
In some specific use cases of Mutter, we would like to not depend
on libcanberra and not have any sound playing feature by default.
The changes keeps the sound player API but make it no-op if the
sound_player feature is disabled to not make it possible to break
a gnome-shell build.
See https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2270
for relevant discussion
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2375>
If the vendor_name was previously successfully determined, we would end
up in the else case, overwriting it with "Unknown vendor" and leaking
the previous vendor_name.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2603>
This allows using two separate ICC profiles for one "color profile",
which is necessary to properly support color transform
calibration profiles from an EFI variable.
These types of profiles are intended to be applied using the color
transformation matrix (CTM) property on the output, which makes the
presented output match sRGB. In order to avoid color profile aware
clients making the wrong assumption, we must set the profile exposed
externally to be what is the expected perceived result, i.e. sRGB, while
still applying CTM from the real ICC profile.
The separation is done by introducing a MetaColorCalibration struct,
that is filled with relevant data. For profiles coming from EFI, a
created profile is practically an sRGB one, but the calibration data
comes from EFI, while for other profiles, the calibration data and the
ICC profile itself come from the same source.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2568>
We may want to use scanout even if the default framebuffer
of the stage view is an offscreen, for example when a Wayland
client provides pre-rotated buffers. The caller is responsible
to ensure this is correct - we already asserted on that before.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2468>
If a stage view uses an offscreen framebuffer exclusively for
rotation and a Wayland client provides pre-rotated buffers,
we should try to use scanout.
This saves us one copy more than scanout in the onscreen case,
i.e. two fullscreen copies in total.
Offscreen rotation is notably used for all 90/270 degree rotations
at the moment, as using display hardware for them is apparently
more complex than for x-/y-flips and can even have detrimental
effects on power consumption.
This can be tested with `weston-simple-egl`.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2468>
This mocks gsd-colord to enable night ligth at a given temperature. The
test then verifies that the result exactly matches that of the gamma
ramps gsd-color generated for the same temperature and ICC profile.
There are two types of profiles tested; ones with VCGT, i.e. calibrated
profiles, and ones without. These are tested as the VCGT affects how the
gamma curve looks, while the non-VCGT profiles all only rely on
the blackbody temperature to generate a gamma ramp.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
More or less copied from gnome-settings-daemon. The look up tables are
either calculated based on the VCGT (Video Card Gamma Table) and the
blackbody color for a given temperature, or the blackbody color for a
given temperature alone, if no VCGT is available.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
This means that e.g. custom profiles or calibrated profiles will be
added and registered with colord. This does not use CdIccStore for two
reasons: don't want to generate duplicate entries for auto-generated
EDID or EFI profiles, and we want to store profiles as MetaColorProfile.
It also happens to be the case that CdIcc does synchronous I/O, which
should be avoided everywhere except on startup.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
It will be used to generate gamma look up tables depending on
temperature.
The temperature comes from org.gnome.SettingsDaemon.Color and
depends on the current night light state.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
It uses the org.gnome.SettingsDaemon.Power.Screen D-Bus API. Currently
brightness set if the proxy is not ready are ignored; whether the
brightness value should be cached and set once it appears or whether
color profiles should be reapplied is yet to be decided.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
Instead of passing 4 arguments (red, green and blue arrays as well as a
size), always pass them together in a new struct MetaGammaLut. Makes
things slightly less tedious.
The KMS layer still has its own variant, but lets leave it as that for
now, to keep the KMS layer "below" the cross backend CRTC layer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
In practice, for KMS backend CRTC's, we cache the gamma in the monitor
manager instance, so that anyone asking gets the pending or up to date
value, instead of the potentially not up to date value if one queries
after gamma was scheduled to be updated, and before it was actually
updated.
While this is true, lets still move the API to the MetaCrtc type; the
backend specific implementation can still look up cached values from the
MetaMonitorManager, but for users, it becomes less cumbersome to not
have to go via the monitor manager.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
We created device profiles, that we manage the lifetime of in colord,
but color devices can be assigned profiles other than the ones it was
created for. For example, this can include the standard sRGB profile
provided by colord.
To achieve this, keep track of the default profile of the CdDevice as
the "assigned" color profile of the device. Given this profile
(CdProfile), construct a MetaColorProfile that can then be interacted
with as if it was generated by ourself.
The assigned profile (default profile in colord terms) does nothing
special so far, but will later be used to determine how to apply CRTC
gamma ramps etc.
The sRGB.icc file used in the tests was copied from colord. It was
stated in the repository that it has no known copyright restrictions.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2164>
This works similiarly to how MetaColorDevice works, by creating them
asynchronously then signalling the 'ready' signal when done. Also
similarly to MetaColorDevice, the on-demand sync cleanup on finalize is
added, to avoid race conditions when hotplugs happens very rapidly,
e.g. in tests.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2164>
Just as gsd-color does, generate color profiles. This can either be done
from EFI, if available and the color device is associated with a built
in panel, or from the EDID. If no source for a profile is found, none is
created.
The ICC profiles are also stored on disk so that they can be read by
e.g. colord. The on disk stored profiles will only be used for storing,
not reading the profiles, as the autogenerated ones will no matter what
always be loaded to verify the on disk profiles are up to date. If a on
disk profile is not, it will be replaced. This is so that fixes or
improvements to the profile generation will be made available despite
having run an older version earlier.
After generating, add some metadata about the generated file itself
needed by colord, i.e. file MD5 checksum and the file path.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2164>
