Now that ClutterActor has a convenient API for getting the stage views
an actor is presented on, we can remove a large part of the code for
resource-scale calculation and instead rely on the stage-views list.
The way this works is a bit different from the old resource scales:
clutter_actor_get_resource_scale() always returns a scale, but this
value is only guaranteed to be correct when called from a vfunc_paint()
implementation, in all other cases the value is guessed using the scale
of the parent actor or the last valid scale. Now in case the value
previously reported by clutter_actor_get_resource_scale() turns out to
be wrong, "resource-scale-changed" will be emitted before the next paint
and the actor has a chance to update its resources.
The general idea behind this new implementation is for actors which only
need the scale during painting to continue using
clutter_actor_get_resource_scale() as they do right now, and for actors
which need the resource scale on other occasions, like during size
negotiation, to use the scale reported by
clutter_actor_get_resource_scale() but also listen to the
"resource-scale-changed" signal to eventually redo the work using the
correct scale.
The "guessing" of the scale is done with the intention of always giving
actors a scale to work with so they don't have to fall back to a scale
value the actor itself has to define, and also with the intention of
emitting the "resource-scale-changed" signal as rarely as possible, so
that when an actor is newly created, it won't have to load its resources
multiple times.
The big advantage this has over the old resource scales is that it's now
safe to call clutter_actor_get_resource_scale() from everywhere (before,
calling it from size negotiation functions would usually fail). It will
also make it a lot easier to use the resource scale for complex cases
like ClutterText without risking to get into relayout loops.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1276
Add private API to ClutterBackend to set a fallback resource scale
available to Clutter. This API will be used for "guessing" the
resource-scale of ClutterActors in case the actor is not attached to a
stage or not properly positioned yet.
We set this value from inside mutters MetaRenderer while creating new
stage-views for each logical monitor. This makes it possible to set the
fallback scale to the scale of the primary monitor, which is the monitor
where most ClutterActors are going to be positioned.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1276
We're going to refactor resource scales, making the notification of
changes to the resource scale a lot more important than it is right now
(we won't guarantee queried scales are correct outside the paint cycle
anymore).
Having a separate signal/vfunc for this will make the difference between
the new clutter_actor_get_resource_scale() API (which can return a
guessed value) and the notification of changes to the resource scale
(which will be guaranteed to return an up-to-date value) more obvious.
So replace the "resource-scale" property of ClutterActor with a
"resource-scale-changed" signal that's emitted when the resource scale
is recalculated.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1276
ClutterBoxLayout calculates the preferred size of the opposite
orientation (so for example the height if the orientation is horizontal)
by getting the preferred size of the real orientation first, and then
the preferred size of the opposite orientation, using the other size as
for_width/height when doing the request.
Right now, for non-homogeneous layouts this for_width/height does not
adjust for the spacing set on the box layout. This leads to children
being passed a slightly larger for_width/height, which in case of
ClutterText might cause the line to not wrap when it actually should.
This in turn means we can end up with an incorrect preferred size for
the opposite orientation, leading to a wrong allocation.
So fix that and adjust for the spacing just as we do for homogeneous
layouts by subtracting the total spacing from the available size that is
distributed between children.
This fixes the wrong height of the checkbox label reported in
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2574.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1333
The property is deprecated and the current implementation simply
redirects it to ClutterActor::background-color, so remove it.
Also update the tests to set the background color directly.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1332
ClutterStage is the one and only subclass of ClutterGroup, but
it overrides basically everything specific to ClutterGroup to
mimic a ClutterActor. What a waste!
Subclass ClutterActor directly and remove all the now useless
vfunc overrides from ClutterStage. Adapt CallyStage to subclass
CallyActor as well.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1332
It is deprecated in favor of the 'z-position' property, and
the implementation itself redirects to the z-position, so
just drop it and replace all get|set_depth calls to their
z-position counterparts.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1332
I noticed my system would fall back to the slow unclipped (and
uncullable) paint path whenever a window touched the left edge of
the screen. Turns out that was a red herring. Just that
`use_clipped_redraw` was uninitialized so clipping/culling was used
randomly.
So the compiler failed to notice `use_clipped_redraw` was uninitialized.
Weirdly, as soon as you fix that it starts complaining that `buffer_age`
might be uninitialized, which appears to be wrong. So we initialize that
too, to shut up the compiler warnings/errors.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1323
The ClutterBindConstraint will change the preferred size an actor
reports so it returns the same size as the source actor in some cases.
This behavior was introduced recently with 4f8e518d.
This can lead to infinite loops in case the source actor is a parent of
the actor the BindConstraint is attached to, that's because calling
get_preferred_size() on the source will recursively call
get_preferred_size() on the actor again.
So to avoid those loops, check if the source is a parent of the actor
we're attached to and don't update the preferred size in that case.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1282
For ClutterClones we need to apply a scale to the texture of the clone
to ensure the painted texture of the source actor actually fits the
allocation of the clone. We're doing this using the transformation
matrix instead of using the scale_x/scale_y properties of ClutterActor
to allow users to scale ClutterClones using that API independently.
Now it's quite a bad idea to get the allocation boxes for calculating
that scale using clutter_actor_get_allocation_box(), since that method
will internally do an immediate relayout of the stage in case the actor
isn't allocated. Another side effect of that approach is that it makes
it impossible to invalidate the transform (which will be needed when we
start caching those matrices) properly.
So since we eventually allocate both the source actor and the clone
ourselves anyway, we can simply use the allocation box inside
clutter_clone_allocate() (which is definitely updated and valid at that
point) to calculate the scale factor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1181
It seems wrong to use the scale factor of the X axis on the Z axis and
it looks like this has been accidentally changed in commit 570fa3f044.
So use a factor of 1.0 instead to not scale the Z axis at all because
the layout machinery only works in X and Y coordinates.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1181
There are cases where a layout manager used by an actor also wants to
return a custom size when the actor has no children, for example in case
the layout manager requests a fixed size. This is currently impossible
because we only query the layout manager when calculating the preferred
size if the actor has children.
So fix that and also use the layout managers size negotiation functions
in case the actor has no children.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1322
The size of the buffer the texture will be written to by
paint_to_buffer() is determined based on
meta_screen_cast_area_stream_src_get_specs() which uses roundf() to
calculate the width and height after scaling. Because the size of the
texture to be written to that buffer is calculated using ceilf(), it
might exceed the allocated buffer when using fractional scaling.
In 3.36 paint_to_buffer() is used from capture_view() which also uses
roundf() to allocate its buffer. Here this leads to a memory corruption
resulting in a crash when taking screenshots of an area.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2842https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1320
The modifier state of the input device is supposed to be set to the
newest state, while the modifier state detail of the event is set to the
last state before the event (so not including the changes triggered by
the event).
So since the modifier state of the event is the last state anyway, the
state of the ClutterInputDevice is supposed to be set by the backend and
not by the stage while queuing the event, so stop setting the state
here.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1275
Make the clutter_input_device_get_actor() API public and remove
clutter_input_device_get_pointer_actor() in favour of the new function.
This allows also getting the "pointer" actor for a given touch sequence,
not only for real pointer input devices like mice.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1275
Switch from clutter_seat_list_devices() to the new peek_devices() method
of ClutterSeat in cases where we're only looping through the returned
list without manipulating it. This way we don't have to unnecessarily
copy around the list of devices.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1275
Add a method to ClutterSeat that allows peeking the list of input
devices and allow looping through devices a bit faster. The API left is
private so we can make use of peeking the GList internally, but don't
have to expose any details to the outside, which means we'd have to
eventually stick with a GList forever to avoid breaking API.
Since we now have the peek_devices() API internally, we can implement
ClutterSeats public list_devices() API using g_list_copy() on the list
returned by peek_devices().
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1275
While it's strongly discouraged, it is possible to queue a new relayout
of an actor in the middle of an allocation cycle, we warn about it but
don't forbid it.
With the introduction of the "shallow relayout" API, our handling of
those relayouts silently changed: Before introducing "shallow
relayouts", we'd handle them on the next stage update, but with the
priv->pending_relayouts hashtable and the
priv->pending_relayouts_version counter, we now do them immediately
during the same allocation cycle (the counter is increased by 1 when
queuing the relayout and we switch to a new GHashTableIter after
finishing the current relayout, which means we'll now do the newly
queued relayout).
This change in behavior was probably not intended and wasn't mentioned
in the commit message of 5257c6ecc2, so
switch back to the old behavior, which is more robust in preventing
allocation-loops. To do this, use a GSList instead of GHashTable for the
pending_relayouts list, and simply steal that list before doing the
relayouts in _clutter_stage_maybe_relayout().
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1267
ClutterAlignConstraint currently assumes the source actor is positioned
in the same coordinate system as the actor it's attached to and
automatically offsets the adjusted allocation by the origin of the
source actor.
This behavior is only valid though in case the source actor is a sibling
of the constraint actor. If the source actor is somewhere else in the
actor tree, the behavior gets annoying because the constraint actor is
offset by (seemingly) random positions.
To fix this, stop offsetting the constraint actors allocation by the
position of the source.
To still make it possible to align the constraint actors origin with the
origin of the source, no longer override the origin of the allocation
in the AlignConstraint. This allows users to align the origin using a
BindConstraint, binding the actor position to the position of the
source, which is more flexible and also more elegant.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/737
Add a new pivot-point property to the ClutterAlignConstraint, similar to
the pivot point used by ClutterActor, defining the point in the
constraint actor around which the aligning is applied to the actor.
Just as the ClutterActor property, this property is defined using a
GraphenePoint.
By default this property remains set to (-1, -1) and the actor
will always be aligned inside the source actor, preserving the existing
behavior of ClutterAlignConstraint.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/737
Now that we have a proper way to mark our allocation as uninitialized,
make use of that and only disallow implicit transitions of the
"allocation" property if that is the case.
This fixes a bug where easing the allocation of an actor is impossible
when someone queued a relayout on it (or a child of it) before.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1290
We currently initialize the ClutterActorBox of the actors allocation to
zero, but there's a difference between a valid zero-allocation and an
actor having never been allocated. Currently it's impossible for us to
detect the latter case in a reliable way and we use the needs_allocation
flag for this, which may also be set in other situations.
So initialize the allocation of actors to the newly added UNINITIALIZED
ClutterActorBox, which will make it easier to detect whether an actor
already got its initial allocation.
This also fixes another issue right now: Actors which get allocated a
(valid) zero allocation, will now notify the "allocation" property in
this case.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1290
Add support for an artificial UNINITIALIZED marking for ClutterActorBox,
done by setting the boxes origin to Infinity and its size to -Infinity.
That is a value that's considered an invalid allocation by Clutter and
which can never be set by sane code.
This will allow setting the allocation of ClutterActors to an
UNINITIALIZED box when creating actors or when removing them from the
scenegraph and makes it possible to explicitely detect uninitialized
allocations, which is useful in a few cases.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1290
We currently go through the whole tree of mapped actors on every paint
cycle to update the stage views actors are on. Even if no actors need
updating of their stage views, traversing the actor tree is still quite
expensive and shows up when using a profiler.
So tone down the amounts of full-tree traversals we have to do on every
paint cycle and only traverse a subtree if it includes an actor which
actually needs updating of its stage views.
We do that by setting the `needs_update_stage_views` flag to TRUE
recursively for all parents up to the stage when the stage-views list of
an actor gets invalidated. This way we end up updating a few more actors
than necessary, but can avoid searching the whole actor tree for actors
which have `needs_update_stage_views` set to TRUE.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1196
Add a new signal that's emitted when the stage views an actor being
painted on have changed, "stage-views-changed". For example this signal
can be helpful when tracking whether an actor is painted on multiple
stage views or only one.
Since we must clear the stage-views list when an actor leaves the stage
(actors that aren't attached to a stage don't get notified about the
stage views being changed/replaced), we also emit the new signal when an
actor gets detached from the stage (otherwise there would be an edge
case where no signal is emitted but it really should: An actor is
visible on a stage view, then detached from the stage, and then attached
again and immeditely moved outside the view).
Also skip the comparison of the old stage-views list and the new one if
nobody is listening to the signal to save some resources.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1196
There are certain rendering techniques and optimizations, for example
the unredirection of non-fullscreen windows, where information about the
output/stage-view an actor is on is needed to determine whether the
optimization can be enabled.
So add a new method to ClutterActor that allows listing the stage-views
the actor is being painted on: clutter_actor_peek_stage_views()
With the way Clutter works, the only point where we can reliably get
this information is during or right before the paint phase, when the
layout phase of the stage has been completed and no more changes to the
actors transformation matrices happen. So to get the stage views the
actor is on, introduce a new step that's done on every master clock tick
between layout and paint cycle: Traversing through the actor tree and
updating the stage-views the mapped actors are going to be painted on.
We're doing this in a separate step instead of inside
clutter_actor_paint() itself for a few reasons: It keeps the code
separate from the painting code, making profiling easier and issues
easier to track down (hopefully), it allows for a new
"stage-views-changed" signal that doesn't interfere with painting, and
finally, it will make it very easy to update the resource scales in the
same step in the future.
Currently, this list is only invalidated on allocation changes of
actors, but not on changes to the transformation matrices. That's
because there's no proper API to invalidate the transformation matrices
ClutterActor implementations can apply through the apply_transform()
vfunc.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1196
When the stage views the stage is shown on are changed, ClutterStage
currently provides a clutter_stage_update_resource_scales() method
that allows invalidating the resource scales of all actors. With the new
stage-views API that's going to be added to ClutterActor, we also need a
method to invalidate the stage-views lists of actors in case the stage
views are rebuilt and fortunately we can re-use the infrastructure for
invalidating resource scales for that.
So since resource scales depend on the stage views an actor is on,
rename clutter_stage_update_resource_scales() and related methods to
clutter_stage_clear_stage_views(), which also covers resource scales.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1196
While the layout manager of a ClutterActor does get properly unset when
destroying an actor, we currently forget to disconnect the
"layout-changed" signal from it.
So do that, and while at it, also switch to using the signal id for
disconnecting from the signal instead of
g_signal_handlers_disconnect_by_func(), which caused problems before
because it might traverse the signal handler list.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1281
We currently are confusing g_param_spec_enum and g_param_spec_flags for
the offscreen-redirect property of ClutterActor. Since it's actually a
flag, make it a flag everywhere.
Fun fact: This was already partly done with
d7814cf63e, but that commit missed the
setter.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1292
