When a gtk theme uses larger shadows for the unfocused state than for
the focused one, this can cause a crash in meta_frame_left_click_event.
Since whether to call meta_frame_left_click_event is decided based on
the decoration size before focusing and the control that was clicked on
after focusing, this can result in an event handled in
meta_frame_left_click_event being on the client area.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1668
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1748>
With commit 7d78768809 we switched to
storing pointer coordinates in MetaInputDeviceNative instead of
ClutterInputDevice, and while we had set the coordinates of the
ClutterInputDevice in ClutterStage when queueing an event, we now set
the MetaInputDeviceNative coordinates in new_absolute_motion_event().
Here a small mistake snuck in: new_absolute_motion_event() only
translates the coordinates of the event, but we call
meta_input_device_native_set_coords() using the x and y variables
(which remain untranslated), so now the input device coordinates are no
longer translated.
Fix that by translating the coordinates of the x and y variables in case
we're we handling a tablet/stylus event instead of only translating the
event coordinates.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1685
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1760>
This fixes the interpolate test to not use the wall clock, but the
monotonic clock. It also cleans up the timestamp granularity naming, so
that the different granularity is clearer, as in the test, different
timestamps have different granularity.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1751>
This more or less rewrites this test so that it explicitly tests the
"interpolation" when a timeline loops, i.e. that if something occupies
the thread when a timeline was supposed to have looped, we end up in the
right place "in the middle" of the next timeline cycle.
The test more or less does this:
* Start a 3 second looping timeline
* Sleep so that we're in the middle of the first cycle
* Sleep again so that we end up in the middle of the next cycle
The semantics checked are that we see the following frames:
* The first frame with timestamp 0
* The second frame in the middle of the first cycle (timestamp ~= 1.5
sceonds)
* The third frame in the end of the first cycle (timestamp == 3.0
seconds)
* The fourth frame, first in the second cycle, with timestamp ~= 1.5
seconds)
This means we can increase the "grace period" to the double (from 0.5 s
to 1 s), while at the same time decrease the time spent running the test
(from 10 s to 4.5 s). This should hopefully make the test less flaky,
especially in slower runners, e.g. aarch64.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1751>
With commit c985753442 the support for
multiple hardware cursors broke, but those were never properly supported
anyway as we usually assume there's only one hardware cursor around.
With the introduction of the KMS thread in the future, we'll only have
one KMS cursor that gets updated directly from the input thread. So
apart from the fact that it never really makes sense to have two cursors
visible, in this new model having multiple cursors won't work anyway.
So make the cursor we show for stylii a software cursor again.
Eventually the plan is to make the input device that's driving the KMS
cursor interchangeable, so that we can always use hardware cursors.
This reverts commit 165b7369c8.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1645
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1758>
To make the double buffered shadow buffer damaged tiles detection
feasable, a new EGL extension is needed for creating FBO's backed by
a custom CPU memory buffer, instead of DMA buffers, as DMA buffers can
be very slow to read, much slower than just painting the shadow buffer
directly.
Leave the code there, since such an EGL extension is intended to be
added, but hide it behind an env var so that it isn't enabled by
accident.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1724>
This commit assumes that cursor surfaces work in a "mailbox" fashion. If
they are painted multiple times before a successful flip, all commits
but the last get discarded, and the last commit gets presented after the
flip succeeds. This is more or less how it works in the atomic backend,
and also more or less how it works in other backends, with the exception
that the cursor painting might fail without any way of knowing. This
assumption is still better than unconditionally discarding all cursor
surface feedbacks as if the cursor painting always fails.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
Regarding the sequence = 0 fallback: in some cases (moving a cursor
plane on atomic amdgpu) we get sequence = 0 in the page flip callback.
This seems like an amdgpu bug, so work around it by assuming a sequence
delta of 1 (it is equal to 1 because of the sequence != 0 check above).
Sequence can also legitimately be 0 if we're lucky during the 32-bit
overflow, in which case assuming a delta of 1 will give more or less
reasonable values on this and next presentation, after which it'll be
back to normal.
Sequence is also 0 on mode set fallback and when running nested, in
which case assuming a delta of 1 every frame is the best we can do.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
The presentation-time protocol allows surfaces to get accurate
timestamps of when their contents were shown on screen.
This commit implements a stub version of the protocol which correctly
discards all presentation feedback objects (as if the surface contents
are never shown on screen). Subsequent commits will implement sending
the presented events to surfaces shown on screen.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
This concerns only the cases when the presentation timestamp is received
directly from the device (from KMS or from GLX). In the majority of
cases this timestamp is already MONOTONIC. When it isn't, after this
commit, the current value of the MONOTONIC clock is sampled instead.
The alternative is to store the clock id alongside the timestamp, with
possible values of MONOTONIC, REALTIME (from KMS) and GETTIMEOFDAY (from
GLX; this might be the same as REALTIME, I'm not sure), and then
"convert" the timestamp to MONOTONIC when needed. An example of such a
conversion was done in compositor.c (removed in this commit). It would
also be needed for the presentation-time Wayland protocol. However, it
seems that the vast majority of up-to-date systems are using MONOTONIC
anyway, making this effort not justified.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
KMS and GLX device timestamps have microsecond precision, and whenever
we sample the time ourselves it's not the real presentation time anyway,
so nanosecond precision for that case is unnecessary.
The presentation timestamp in ClutterFrameInfo is in microseconds, too,
so this commit makes them have the same precision.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
A flag indicating whether the presentation timestamp was provided by
the display hardware (rather than sampled in user space).
It will be used for the presentation-time Wayland protocol.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
A flag indicating whether the presentation timestamp was provided by the
display hardware (rather than sampled in user space).
It will be used for the presentation-time Wayland protocol.
This is definitely the case for page_flip_handler(), and I'm assuming
this is also the case for the two instances in the GLX code.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
ClutterText has a bit of a mess around its signalling of changes to the
cursor position: There's the position (deprecated) and cursor-position
property, and there's the cursor-changed and cursor-event (deprecated)
signal. The two properties are supposed to be notified when the cursor
position changes, and the two signals are notified when the cursor
position or size changes.
Now the properties notifications and the signals get fired in two very
different places: The two properties are notified in
clutter_text_set_cursor_position(), while the signals are fired during
the paint cycle when we figured out the final cursor position. The
latter is a pretty bad idea, nobody expects such a signal to be fired
during painting, and also changes to the text that are done in the
signal handler will only be applied on the next paint.
Now StEntry listens to cursor position changes via cursor-changed and
invalidates its text shadow, but since the signal is only notified
during the paint, the old text shadow will still get applied. To fix
this, also emit the cursor-changed signal when we notify the
cursor-position property.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1757>
The old calculation was introduced to improve the precision
with commit c16a5ec1cf.
Here, I call the calculation as "revision 2", and the
calculation even older as "revision 1", and the new
calculation introduced with this commit as "reivion 3".
Revision 2 has two problems:
1. The calculation is mixed with fixed-point numbers and
floating-point numbers.
To overcome the precision loss of fixed-point numbers division,
it first "calculates refresh rate in milliHz first for extra
precision", but this requires converting the value back to Hz.
An extra calculation has performance and precision costs.
It is also hard to understand for programmers.
2. The calculation has a bias.
In the process, it does:
refresh += (drm_mode->vtotal / 2);
It prevents the value from being rounded to a smaller value in
a fixed-point integer arithmetics, but it only adds a small
bias (0.0005) and consumes some fraction bits for
floating point arithmetic.
Revision 3, introduced with this commit always uses
double-precision floating-point values for true precision and
to ease understanding of this code. It also removes the bias.
Another change is that it now has two internal values, numerator
and denominator. Revision 1 also calculated those two values
first, and later performed a division with them, which minimizes
the precision loss caused by divisions. This method has risks of
overflowing the two values and revision 1 caused problems due to
that, but revision 3 won't thanks to double-precision. Therefore,
revision 3 will theoretically have the result identical with
the calculation with infinite-precision.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1737>
Handle the case of a TOUCH_BEGIN event during window dragging separately
instead of treating it like a TOUCH_UPDATE event: Simply return TRUE to
make Clutter stop event propagation if it's the pointer emulating
sequence and let Clutter propagate the event if it isn't.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/427>
Window dragging should be cancelled when the touch sequences we're using
are no longer available. Also listen to TOUCH_CANCEL events if the
window is grabbed and cancel the grab op when a TOUCH_CANCEL event
happens.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/427>
This removes the responsibility of tracking these from the backend to
the base object. The backends are instead responsible for calling the
function to update the values.
For the native backend, it's important that this happens on the correct
thread, so each time either of these states may change, post a idle
callback on the main thread that sets the, at the time of queuing said
callback, up to date state. This means that things on the main thread
will always be able to get a "new enough but not too new" state when
listening on the 'notify::' signals and getting the property value
after.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1739>
In an x11 session, we don't receive motion events from X when the
pointer is above a window. Since commit 734a1859 we only do picking on
motion events though, which means when clicking the mouse to focus a
window, we don't repick and might still think the pointer is hovering
above another window or actor, ending up not focussing the window.
Fix this by always repicking on BUTTON_PRESS events. While this is not
necessary in the wayland session, button presses happen rarely compared
to motion events, so it's not a performance regression to do it in
Wayland sessions, too.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1660
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1752>
ClutterText allows setting a custom PangoAttrList, and St uses that to
set the text style it's reading from CSS. One style St enforces using
this mechanism is the text color and setting the text color should
obviously not affect the size of the layout. ClutterText does queue a
relayout in that case though because it unconditionally queues a
relayout when updating the PangoAttrList.
We can avoid this relayout by reusing an optimization ClutterText has:
clutter_text_queue_redraw_or_relayout() will only queue a relayout if
the requested size of the layout changed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1750>
