Being able to set a marker at a normalized point on a timeline, instead
of using a specific time, is a nice fit with the current Timeline class
API.
https://bugzilla.gnome.org/show_bug.cgi?id=694319
When setting an explicit transform with clutter_actor_set_transform()
and a non (0,0) pivot-point, clutter_actor_apply_transform() will fail
to roll back the pivot-point translation done before multiplying the
transformation matrix due to the "out:" label being slightly misplaced
in clutter_actor_real_apply_transform().
This works properly:
clutter_actor_set_pivot_point (actor, 0.5, 0.5);
clutter_actor_set_rotation_angle (actor, CLUTTER_Z_AXIS, 30);
This results in the actor being moved to the pivot-point position:
clutter_actor_set_pivot_point (actor, 0.5, 0.5);
clutter_matrix_init_identity(&matrix);
cogl_matrix_rotate (&matrix, 30, 0, 0, 1.0);
clutter_actor_set_transform (actor, &matrix);
This also add a conformance test checking that even when using a
pivot-point, no matter how a rotation is set the resulting
transformation matrix will be the same.
https://bugzilla.gnome.org/show_bug.cgi?id=690214
The X11-specific windowing checks were hidden behind an #ifdef, however
if the tests were run under Wayland, they would execute uncondionally
and cause assertion failures. Fix this by also hiding them behind a
check that the current backend is indeed X11.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
The CSS3 Transitions specification from the W3C defines the possibility
of using a parametrized step() timing function, with the following
prototype:
steps(n_steps, [ start | end ])
where @n_steps represents the number of steps used to divide an interval
between 0 and 1; the 'start' and 'end' tokens describe whether the value
change should happen at the start of the transition, or at the end.
For instance, the "steps(3, start)" timing function has the following
profile:
1 | x
| |
| x---|
| ' |
| x---' |
| ' |
0 |---' |
Whereas the "steps(3, end)" timing function has the following profile:
1 | x---|
| ' |
| x---' |
| ' |
x---' |
| |
0 | |
Since ClutterTimeline uses an enumeration for controlling the progress
mode, we need additional API to define the parameters of the steps()
progress; for this reason, we need a CLUTTER_STEPS enumeration value,
and a method for setting the number of steps and the value transition
policy.
The CSS3 Transitions spec helpfully also defines a step-start and a
step-end shorthands, which expand to step(1, start) and step(1, end)
respectively; we can provide a CLUTTER_STEP_START and CLUTTER_STEP_END
enumeration values for those.
It can be useful to check whether a ClutterActorIter is currently valid,
i.e. if the iterator has been initialized *and* if the actor to which it
refers to hasn't been updated.
We can also use the is_valid() method in the conformance test suite to
check that initialization has been successful, and that changing the
children list through the ClutterActorIter API leaves the iterator in a
valid state.
For now, it just generates a simple horizontal slide (by writing
to /dev/uinput) and checks that the stage gets the events at the
expected coordinates.
The test won't run if it doesn't have read/write permissions to
/dev/uinput.
It also adds OS_LINUX to config.h.
The property uses an array with the following CSS style syntax
[ top, right, bottom, left ] or
[ top, left/right, bottom ] or
[ top/bottom, left/right ] or
[ top/right/bottom/left ]
https://bugzilla.gnome.org/show_bug.cgi?id=676367
The get_distance() API uses machine integers to compute the distance;
this means that on 32bit we can overflow the integer size. This gets
hidden by the fact that get_distance() returns an unsigned integer as
well.
In reality, ClutterPath is an unmitigated mess, and the only way to
actually fix it is to break API.
https://bugzilla.gnome.org/show_bug.cgi?id=652521
Some of the Clutter code was using GL types for the primitive types
such as GLint and GLubyte and then passing these to Cogl. This doesn't
make much sense because the Cogl functions directly take native C
types. This patch just replaces them with either a native C type or a
glib type.
Some of the cogl conformance tests are trying to directly call GL for
example to test creating a foreign texture. These tests have been
changed to manually define the GL enum values instead of relying on a
GL header to define them.
This is necessary because Cogl may soon stop including a GL header
from its public headers.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
It's a bit late in the game for changing the emission of the paint
signal with actors that use paint nodes - mostly because we have both
implicit paint nodes (background color, content) and explicit paint
nodes (the paint_node virtual).
When we branch for 1.12 we can revert this change.
This has been converted to a Cogl-based test in the cogl source tree
so there is no need to maintain it here anymore.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
It's the conformance test suite: there's no need to namespace the files,
just like there's no need to namespace the units.
This commit does not change the Cogl tests: they will be moved to Cogl
over time, and it's easier to do if we leave them as they are.
Since Cogl has started restricting what cogl 1.x api is exposed when
COGL_ENABLE_EXPERIMENTAL_2_0_API is defined and since we build all
Clutter internals with COGL_ENABLE_EXPERIMENTAL_2_0_API defined this
patch makes a first pass at reducing our internal use of the Cogl 1.x
api.
The most notable api that's no longer exposed to us internally is
the cogl_material_ api so this switches all Clutter internals to use the
cogl_pipeline_ api instead. This patch also makes quite a bit of
progress removing internal uses of CoglHandle although there is still
more to go.
The experimental cogl_texture_pixmap_x11_new() api was recently changed
to take an explicit context argument and return a GError on failures.
This updates Clutter's use of the api accordingly.
A lot of the conformance tests that were just testing Cogl
functionality have been ported to be standalone Cogl tests in the Cogl
source tree. This patch removes those from Clutter so we don't have to
maintain them in two places.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
ClutterActor should be emitting signals defined on the ClutterContainer
interface, as well as ensuring that manipulating the scene graph is
still possible from within them.
The new unit checks that we're emitting signals, by implementing
something similar to the Bin class available in toolkits like gtk, st,
and mx — i.e. a container that can only hold one child at any given
point.
Some of Cogl's experimental apis have changed so that the buffer apis
now need to be passed a context argument and some drawing apis have been
replaced with cogl_framebuffer_ drawing apis that take explicit
framebuffer and pipeline arguments.
These changes were made as part of Cogl moving towards a more stateless
api that doesn't rely on a global context.
This patch updates Clutter to work with the latest Cogl api and bumps
the required Cogl version to 1.9.5.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Iterating over children and ancestors of an actor is a relatively common
operation. Currently, you only have one option: start a for() loop, get
the first child of the actor, and advance to the next sibling for the
list of children; or start a for() loop and advance to the parent of the
actor.
These operations can be easily done through the ClutterActor API, but
they all require going through the public API, and performing multiple
type checks on the arguments.
Along with the DOM API, it would be nice to have an ancillary, utility
API that uses an iterator structure to hold the state, and can be
advanced in a loop.
https://bugzilla.gnome.org/show_bug.cgi?id=668669
Something is causing a deadlock when using clutter_threads_* API inside
the offscreen redirect conformance test. The conformance tests are
pretty insane anyway, so for the time being, let's put g_timeout_add()
back in while we figure out the issue.
ClutterActor provides four methods for changing the paint sequence order
of its children:
raise_top()
raise()
lower()
lower_bottom()
The first and last one being just wrappers around raise() and lower(),
respectively. These methods have various issues: they omit the parent,
preferring to retrieve it from the actor passed as the first argument;
this does not match the new style of API introduced to operate on the
list of children of an actor.
Additionally, the raise() and lower() methods of ClutterActor call into
the Container interface, and are not really aptly named (raise() in
particular collides with the completely unrelated 'raise' keyword in
Python, and usually needs to be wrapped in order to be used at all).
Furthermore, we need public methods that Container can call from its
default implementation, as well as methods to port current Container
implementations.
Finally, since we have insert_child_at_index(), we should also have an
equivalent set_child_at_index() as well.
