Dispose() may be called more than once, so calling g_free directly
on the device name is unsafe. Instead, use g_clear_pointer() to
make sure we don't attempt to free the memory again.
https://bugzilla.gnome.org/show_bug.cgi?id=719563
When support for implicit animation of actor position was added,
the optimization for not queueing when allocating an actor back
to the same location was lost. This optimization is important
since when we are hierarchically allocating down from the top of
the stage we constantly reallocate the actors at the top of the
hierarchy back to the same place.
https://bugzilla.gnome.org/show_bug.cgi?id=719368
When the source actor potentially changes size, that shouldn't
necessarily result in the target actor being redrawn - it should
be like when a child of a container is reallocated due to changes
in its siblings or parent - it should redraw only to the extent
that it is moved and resized. Privately export an internal function
from clutter-actor.c to allow getting this right.
https://bugzilla.gnome.org/show_bug.cgi?id=719367
Since the journal is flushed on context switches, trying to use a cached
buffer means that we will use glReadPixels when picking, which isn't what
we want. Instead, always use a clipped draw, and remove the logic for
caching the pick buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=712563
The table layout manager has various issues:
• no support for RTL flipping
• most of the layout API is legacy, and has been replaced by the
alignment and expansion flags on ClutterActor
• the animation API is legacy, and has been replaced by the
implicitly animatable allocation
• the spanning cells handling is a bit awkward, as is its API
On top of that, we imported the grid layout management policy from GTK+
into ClutterGridLayout, which provides all the required features in a
more well-designed API.
Instead of wasting time and resources updating TableLayout, we should
deprecate it and point developers of the GridLayout.
This adds clutter_event_add/remove_filter which adds a callback
function which will receive all Clutter events just before the event
signal is emitted for them. The event filter will be invoked
regardless of any grabs or captures. This will be used by Mutter which
wants to access the events at a lower level then the event bubbling
mechanism. It needs to see all mouse motion events even if there is a
grab in place.
https://bugzilla.gnome.org/show_bug.cgi?id=707560
The state that the X server sends for button events, by specification,
contains the button state before the event. We need to synthesize in
the result of the event in order to determine what the current button
state is.
https://bugzilla.gnome.org/show_bug.cgi?id=712322
XFixesShowCursor / XFixesHideCursor does not actually take the suppled
window argument into account -- the effect is actually global. Use
XDefineCursor instead.
https://bugzilla.gnome.org/show_bug.cgi?id=707071
Destroying an actor is supposed to destroy all of its children, so
it makes sense to reason that destroying the stage should destroy all
of its children, too.
Unfortunately, it seems that the stage removed all of its children
without destroying them before chaining up to what would destroy all
of its children, for whatever reason. Change this to a destroy so
resources get cleaned up.
The TextureNode premultiplies the blend color passed to the node
constructor, so we need to document the fact properly to avoid
causing premultiplication twice.
We can also allow passing NULL for a color, and use a fully opaque
white, to make the code slightly more friendly.
ClutterTextureNode will do that for us when converting the ClutterColor
to a CoglColor, so we can simply pass a white color with the correct
alpha channel.
The calculation (n - 1) * spacing to compute the total spacing is
only correct for n >= 1 - if there are no visible rows/cols, the
required spacing is 0 rather than negative.
https://bugzilla.gnome.org/show_bug.cgi?id=709434
For some XI2 we do not have a Stage associated to the event window.
Original patch by: Giovanni Campagna <scampa.giovanni@gmail.com>
Signed-off-by: Emmanuele Bassi <ebassi@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=708439
On high DPI density displays we create surfaces with a size scaled up by
a certain factor. Even if the contents stay at the same relative size
and position, we need to compensate the scaling both when changing the
surface size, and when dealing with input.
https://bugzilla.gnome.org/show_bug.cgi?id=705915
In order to transparently support high DPI density displays, we must
maintain all coordinates and sizes exactly as they are now — but draw
them on a surface that is scaled up by a certain factor. In order to
do that we have to change the viewport and initial transformation
matrix so that they are scaled up by the same factor.
https://bugzilla.gnome.org/show_bug.cgi?id=705915
The added support is very very basic (single touch, motion only,
no acceleration, no pressure recognition), but anything more
complex requires a state machine that will be hopefully provided
by libinputcommon in the future.
And at least, with this patch the pointer moves, which will be
useful for people testing wayland in 3.10 without a physical mouse.
https://bugzilla.gnome.org/show_bug.cgi?id=706494
In situations when the default backend would fail (for example
when compiled with X11 support but run without DISPLAY), or
when the application is using backend specific code, it makes
sense to let the application choose the backend explicitly.
https://bugzilla.gnome.org/show_bug.cgi?id=707869
It was a bad idea to add it, because clutter events are batched,
so by the time the application processes one, the keyboard state
internally tracked by clutter could be already different.
Instead, apps should use clutter_event_get_state_full()
https://bugzilla.gnome.org/show_bug.cgi?id=706494
We can't dispatch a motion event for EV_REL (because we don't
have yet the other half of the event), but we can't also queue
them at the end of processing (because we may lose some history
or have button/keys intermixed).
Instead, we use EV_SYN, which means "one logical event was
completed", and let the winsys-independent code do the actual
motion compression.
https://bugzilla.gnome.org/show_bug.cgi?id=706494
When we release a device, we lose all the events after that point,
so our state can become stale. Similarly, we need to sync the
state with the effectively pressed keys when we reclaim.
This ensures that modifier keys don't get stuck when switching
VTs using a keybinding.
https://bugzilla.gnome.org/show_bug.cgi?id=706494
When talking to other applications or serializing the modifier
state (and in particular when implementing a wayland compositor),
the effective modifier state alone is not sufficient, one needs
to know the base, latched and locked modifiers.
Previously one could do with backend specific functionality
such as clutter_device_manager_evdev_get_xkb_state(), but the
problem is that the internal data structures are updated as
soon as the events are fetched from the upstream source, but
the events are reported to the application some time later,
and thus the two can get out of sync.
This way, on the other hand, the information is cached in the
event, and provided to the application with the value that
was current when the event was generated.
https://bugzilla.gnome.org/show_bug.cgi?id=706494
These two devices are logically tied togheter, and their state
should always be the same. Also, we need to update them after
the event is queued, as the current modifier state (as opposed to the
modifier mask in the event) should include also the effect of the last
key press/release.
https://bugzilla.gnome.org/show_bug.cgi?id=706494
Add a new callback that is called prior to emitting pointer
motion events and that can modify the new pointer position.
The main purpose is allowing multiscreen apps to prevent the
pointer for entering the dead area that exists when the screens
are not the same size, but it could also used to implement
pointer barriers.
A callback is needed to make sure that the hook is called early
enough and the Clutter state is always consistent.
https://bugzilla.gnome.org/show_bug.cgi?id=706652
If we don't get passed a CoglFramebuffer when creating the root paint
node then we ask Cogl to give us the current draw buffer.
This allows the text-cache conformance test to pass, but it'll require
further investigation.
Currently the default values according to their param spec don't
match the actually used defaults, so update the former to reflect
the actual behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=703809
Whether a child should receive extra space should be determined
by the expand property, not [xy]_fill (which just determine how
additional space should be used). The behavior is already correct
when using the ClutterActor:[xy]_expand properties, but needs
fixing for the corresponding ClutterBoxLayoutChild property.
https://bugzilla.gnome.org/show_bug.cgi?id=703809
Just as BoxLayout, BinLayout uses an odd interpretation of the box
passed into allocate(): to define a child area of (w x h) starting at
(x, y), callers need to pass a box of (x, 2 * x + w, y, 2 * y + h).
This behavior is just confusing, change it to use the full box for
child allocations.
https://bugzilla.gnome.org/show_bug.cgi?id=703809
Currently, BoxLayout interprets the box passed into allocate() in
a fairly peculiar way:
- in the direction of the box, all space between [xy]1 and [xy]2
is distributed among children (e.g. children occupy the entire
width/height of the box, offset by [xy]1)
- in the opposite direction, expanded children receive space
between [xy]1 and the height/width of the box (e.g. children
occupy the width/height of the box minus [xy]1, offset by [xy]1)
The second behavior doesn't make much sense, so adjust it to interpret
the box parameter in the same way as the first one.
https://bugzilla.gnome.org/show_bug.cgi?id=703809
The implicitly created transitions are removed when complete by the
implicit transition machinery. The remove-on-complete hint is for
user-provided transitions.
https://bugzilla.gnome.org/show_bug.cgi?id=705739
ClutterTransition:remove-on-complete uses the ClutterTimeline::stopped
signal, as it's the signal that tells us that the timeline's duration
has fully elapsed.
Mouse wheel events come as EV_REL/REL_WHEEL, and we can convert
them to clutter events on the assumption that scrolling with
the wheel is always vertical.
https://bugzilla.gnome.org/show_bug.cgi?id=705710
xkb_state_update_key() needs to be called only on state transitions,
otherwise the state tracking gets confused and locks certain modifiers
forever.
https://bugzilla.gnome.org/show_bug.cgi?id=705710
A wayland compositor needs to have more keyboard state than
ClutterModifierState exposes, so it makes sense for it to use
xkb_state directly. Also, it makes sense for it to provide
it's own keymap, to ensure a consistent view between the compositor
and the wayland clients.
https://bugzilla.gnome.org/show_bug.cgi?id=705710
All evdev devices are slave devices, which means that xkb state
and pointer position must be shared by emulating a core keyboard
and a core pointer. Also, we must make sure to add all modifier
state (keyboard and button) to our events.
https://bugzilla.gnome.org/show_bug.cgi?id=705710
Hardware keycodes in Clutter events are x11 keycodes, which are
the same as evdev + 8, but we need to reverse the translation when
explicitly asked for an evdev keycode.
https://bugzilla.gnome.org/show_bug.cgi?id=705710
In some cases, applications (or actually, wayland compositors)
don't have the required permissions to access evdev directly, but
can do so with an external helper like weston-launch.
Allow them to do so with a custom callback that replaces the regular
open() path.
https://bugzilla.gnome.org/show_bug.cgi?id=704269
This is necessary to avoid a deadlock with the compositor. When setting
a stage size before the stage was shown this would trigger a redraw
inside clutter_stage_wayland_resize. This redraw would result
in a call into eglSwapBuffers which would attach a buffer to the surface
and commit. Unfortunately this would happen before the role for the
surface was set. This would result in the compositor not relaying to the
client that the desired frame was shown.
With this change the call to wl_shell_surface_set_toplevel is always
made before the first redraw.
https://bugzilla.gnome.org/show_bug.cgi?id=704457
We should not create a shell surface and set the role for that shell
surface if the surface was a foreign one provided through
clutter_wayland_set_wl_surface
https://bugzilla.gnome.org/show_bug.cgi?id=699578
This adds support for optionally a providing a foreign Wayland surface
to a ClutterStage before it is first show. Setting a foreign surface
prevents Cogl from allocating a surface and shell surface for the stage
automatically.
v2: add CLUTTER_AVAILABLE_IN_1_16 annotation and API reference docs
(review from Emmanuele Bassi)
v3: set a boolean to indicate that this stage is using a foreign surface
(Rob Bradford)
https://bugzilla.gnome.org/show_bug.cgi?id=699578
This allows the integration of Clutter with another library, like GTK+,
that is dispatching the events itself. This is implemented by calling
into the cogl_wayland_renderer_set_event_dispatch_enabled() and since
that function must be called on the newly created renderer the newly
added clutter_wayland_disable_event_retrieval must be called before
clutter_init()
https://bugzilla.gnome.org/show_bug.cgi?id=704279
Since commit 4543ed6ac3 in Cogl, Cogl will now try to consume
Windows message itself. This doesn't really cause any problems because
both message loops just call DispatchMessage which will cause the
message to be routed through Clutter's window procedure either way.
However, it's not great to have two sources listening for messages so
this patch disables Cogl's message retrieval.
https://bugzilla.gnome.org/show_bug.cgi?id=701356
This removes a bit of work that we have to do for every device, and makes it
easy for mutter to patch out parts of the event mask it doesn't want.
https://bugzilla.gnome.org/show_bug.cgi?id=703969
The Wayland 1.0 API allows orthoganal components of an application to
query the shell and compositor themselves by querying their own
wl_registry. The corresponding API in Cogl has been removed so Clutter
shouldn't call it anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=703878
