g_task_propagate_pointer relinishes the GTask
of its reference to the propagated pointer, so we need to
unref it ourselves when we're done with it.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
In 97a4cc8c, we accidentally lost the check that kept us from
sending multiple configures to a window before it responds to
_NET_WM_SYNC_REQUEST. So _NET_WM_SYNC_REQUEST stopped working
properly. Add a check back with the same effect.
https://bugzilla.gnome.org/show_bug.cgi?id=696091
During a resize, if we don't have a configure pending, then a counter
change shouldn't trigger anything other than the normal drawing:
it's just a spontaneous frame from the application. So don't try
to update the position or remove our timeout ID.
https://bugzilla.gnome.org/show_bug.cgi?id=696091
ClutterBinLayout's get_preferred_width / get_preferred_height
doesn't respect fixed child positioning when calculating the
size of the layout, but does when allocating. This is absurdly
broken, but it's what we're given. Use a ClutterFixedLayout,
which doesn't have these issues.
https://bugzilla.gnome.org/show_bug.cgi?id=696089
Trying to track the fullscreen status outside of Mutter, as GNOME Shell
was doing previously, was very prone to errors, because Mutter has a
very tricky definition of when a window is set to be fullscreen and
*actually* acting like a fullscreen window.
* Add meta_screen_get_monitor_in_fullscreen() and an
::in-fullscreen-changed signal. This allows an application to
track when there are fullscreen windows on a monitor.
* Do the computation of fullscreen status in a "later" function that
runs after showing, so we properly take focus into account.
* To get ordering of different phases right, add more values
to MetaLaterType.
* Add auto-minimization, similar to what was added to GNOME Shell
earlier in this cycle - if a window is set to be fullscreen, but
not actually fullscreen, minimize.
https://bugzilla.gnome.org/show_bug.cgi?id=649748
Since the tile mode is now always reset on maximize(), this code
no longer does anything (not to mention that side-by-side tiled
windows haven't snapped back for a while now).
https://bugzilla.gnome.org/show_bug.cgi?id=682779
We used to restore side-by-side tiling when unmaximizing, so we
kept the tile-mode during maximization. Since commit 10d53fc7d
there's no longer a good reason to do so, and it can result in
tile previews being shown erroneously on window drag operations
without motion (double-click on titlebar), so reset the tile
mode in maximize().
https://bugzilla.gnome.org/show_bug.cgi?id=682779
The tile preview is expected to be shown underneath the focus window.
However the code that restacks the preview broke when override-redirect
windows were moved to a separate window group.
To fix, special-case tile previews to put them in the NORMAL layer.
https://bugzilla.gnome.org/show_bug.cgi?id=696053
If _NET_WM_OPAQUE_REGION is set when the window is first mapped, the
initial load_properties will happen before the window actor is created,
and we'll have a call to meta_compositor_window_shape_changed. Just
fizzle this call out instead of doing anything fancy, as we'll pick
up the opaque region when the window actor is eventually created.
https://bugzilla.gnome.org/show_bug.cgi?id=695813
Previously, we were handling failure to respond to _NET_WM_SYNC_REQUEST
in the code path for throttling motion events. But this meant that
if a window didn't respond to _NET_WM_SYNC_REQUEST and there were no
motion events - for a keyboard resize, or after the end of the grab
operation - it would end up in a stuck state.
Use a separate per-window timeout to reliably catch the failure to respond
to _NET_WM_SYNC_REQUEST.
https://bugzilla.gnome.org/show_bug.cgi?id=694046
During resizing we froze window updates when configuring the
window, and unfroze the window updates when processing the
next resize. This wasn't absolutely reliable, because we might
not have a next resize. Instead tie window freezing more
directly to the current sync request value - a window is
frozen until it catches up with the last value we sent it
in _NET_WM_SYNC_REQUEST.
Testing with unresponsive clients showed that there was a bug
where window->disable_sync once set, would not actually disable
sync, but it *would* disable noticing that the client was
unresponsive for the next resize. Fix that by checking for
->disable_sync before sending _NET_WM_SYNC_REQUEST.
https://bugzilla.gnome.org/show_bug.cgi?id=694046
Window actors might be temporarily parented to intermediate actors during
effect, but we should not require that the plugin keeps track of stacking.
Rather, assume that the intermediate groups holds a whole stack, and
applying position within it.
https://bugzilla.gnome.org/show_bug.cgi?id=695711
When windows get redirected off screen, all that gets left behind
is black. We don't want to flicker black at startup, though.
This commit maps the overlay window early, before redirecting
toplevels, so they end up getting snapshotted onto the background
pixmap of the overlay window when the overlay window is mapped.
https://bugzilla.gnome.org/show_bug.cgi?id=694321
Send a _NET_WM_FRAME_DRAWN for each newly created window, as required
by the specification. This avoids a race where a window might be created
frozen but already unfrozen by the time we first see fetch the
counter value.
Remove a duplicate call to meta_compositor_set_updates_frozen() which
was called before the MetaWindowActor is created and hence did nothing.
https://bugzilla.gnome.org/show_bug.cgi?id=694771
mutter currently only filters the overlay key through the shell
when there is a grab operation and that grab operation belongs to the
shell (because the shell is pushModal'd). This means the shell can't
filter out overlay key press events events at startup (since the shell
isn't normally modal).
This commit changes the code to always run the shell filtering code,
even when the shell is not modal.
https://bugzilla.gnome.org/show_bug.cgi?id=694837
The background vignette currently fits itself to the painted
texture, instead of the monitor. This causes some very
wrong looking drawing for backgrounds that don't fill the screen.
This commit reworks the vignette shader code to be clearer, more
correct, and parameterized so that it knows how to scale and
position the vignette.
https://bugzilla.gnome.org/show_bug.cgi?id=694393
The WALLPAPER style of background painting currently
draws starting in the upper left corner of each monitor.
This isn't really correct, it means the seam between
monitors doesn't match up and edges look unbalanced if
the tile isn't a multipe of monitor size.
Really, the tiles should be centered in the middle of
the screen. (Just like when tiling a bathroom floor,
tiles should start in the center of the room.)
This commit reworks the math to make that happen.
https://bugzilla.gnome.org/show_bug.cgi?id=694393
Commit 4f2bb583bf started to use a clutter_threads_add_repaint_func_full
callback instead of connecting to the stage's paint signal.
The callback has to return TRUE if it wants to be called again, so fix that
as we want to call it for every frame (otherwise apps supporting the WM SYNC
protocol will stop drawing).
https://bugzilla.gnome.org/show_bug.cgi?id=695006
Doing so causes useless full stage redraws and breaks culling
as clutter cannot know how the signal handler affects painting.
So use clutter_threads_add_repaint_func_full with the
CLUTTER_REPAINT_FLAGS_POST_PAINT flag instead.
https://bugzilla.gnome.org/show_bug.cgi?id=694988
gnome-shell shouldn't announce to the session manager it's
"ready" until it's fully initialized. It currently tells
the session manager it's ready as soon as it hits the main
loop. This causes nautilus in classic mode to start before
we have workspaces initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=694876
During compositor grabs, all global keybindings that don't go
through mutter's keybinding system are blocked. To allow other
processes to make use of it, gnome-shell will expose a simple
grab API on DBus; for this, add API to grab key combos directly
instead of parsing accelerators stored in GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=643111
There is currently code to try to fill gradients in a
hardware native format, using #ifdefs. That optimization is
unimportant since gradients only use 2 byte buffers. It's
also incorrect because it's getting the channel order wrong
at buffer initialization time.
This commit drops the ifdefs for clarity and fixes the
channel order.
https://bugzilla.gnome.org/show_bug.cgi?id=694641
meta_screen_get_monitor_for_rect will return the monitor that
a given rect belongs in (choosing the "best" monitor based on
overlap, if there are overlapping monitors).
It doesn't work with 0x0 rects, though.
This commit fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=694725
