mutter/cogl/cogl-path.h

490 lines
15 KiB
C
Raw Normal View History

/*
* Cogl
*
* An object oriented GL/GLES Abstraction/Utility Layer
*
* Copyright (C) 2008,2009 Intel Corporation.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library. If not, see <http://www.gnu.org/licenses/>.
*
*
*/
#if !defined(__COGL_H_INSIDE__) && !defined(CLUTTER_COMPILATION)
#error "Only <cogl/cogl.h> can be included directly."
#endif
#ifndef __COGL_PATH_H__
#define __COGL_PATH_H__
#include <cogl/cogl-types.h>
G_BEGIN_DECLS
/**
* SECTION:cogl-paths
* @short_description: Functions for constructing and drawing 2D paths.
*
* There are two levels on which drawing with cogl-paths can be used.
* The highest level functions construct various simple primitive
* shapes to be either filled or stroked. Using a lower-level set of
* functions more complex and arbitrary paths can be constructed by
* concatenating straight line, bezier curve and arc segments.
*
* When constructing arbitrary paths, the current pen location is
* initialized using the move_to command. The subsequent path segments
* implicitly use the last pen location as their first vertex and move
* the pen location to the last vertex they produce at the end. Also
* there are special versions of functions that allow specifying the
* vertices of the path segments relative to the last pen location
* rather then in the absolute coordinates.
*/
typedef struct _CoglPath CoglPath;
/**
* CoglPathFillRule:
* @COGL_PATH_FILL_RULE_NON_ZERO: Each time the line crosses an edge of
* the path from left to right one is added to a counter and each time
* it crosses from right to left the counter is decremented. If the
* counter is non-zero then the point will be filled. See <xref
* linkend="fill-rule-non-zero"/>.
* @COGL_PATH_FILL_RULE_EVEN_ODD: If the line crosses an edge of the
* path an odd number of times then the point will filled, otherwise
* it won't. See <xref linkend="fill-rule-even-odd"/>.
*
* #CoglPathFillRule is used to determine how a path is filled. There
* are two options - 'non-zero' and 'even-odd'. To work out whether any
* point will be filled imagine drawing an infinetely long line in any
* direction from that point. The number of times and the direction
* that the edges of the path crosses this line determines whether the
* line is filled as described below. Any open sub paths are treated
* as if there was an extra line joining the first point and the last
* point.
*
* The default fill rule is %COGL_PATH_FILL_RULE_EVEN_ODD. The fill
* rule is attached to the current path so preserving a path with
* cogl_get_path() also preserves the fill rule. Calling
* cogl_path_new() resets the current fill rule to the default.
*
* <figure id="fill-rule-non-zero">
* <title>Example of filling various paths using the non-zero rule</title>
* <graphic fileref="fill-rule-non-zero.png" format="PNG"/>
* </figure>
*
* <figure id="fill-rule-even-odd">
* <title>Example of filling various paths using the even-odd rule</title>
* <graphic fileref="fill-rule-even-odd.png" format="PNG"/>
* </figure>
*
* Since: 1.4
*/
typedef enum {
COGL_PATH_FILL_RULE_NON_ZERO,
COGL_PATH_FILL_RULE_EVEN_ODD
} CoglPathFillRule;
/**
* cogl_is_path:
* @handle: A CoglHandle
*
* Gets whether the given handle references an existing path object.
*
* Return value: %TRUE if the handle references a #CoglPath,
* %FALSE otherwise
*/
gboolean
cogl_is_path (CoglHandle handle);
/**
* cogl_path_set_fill_rule:
* @fill_rule: The new fill rule.
*
* Sets the fill rule of the current path to @fill_rule. This will
* affect how the path is filled when cogl_path_fill() is later
* called. Note that the fill rule state is attached to the path so
* calling cogl_get_path() will preserve the fill rule and calling
* cogl_path_new() will reset the fill rule back to the default.
*
* Since: 1.4
*/
void
cogl_path_set_fill_rule (CoglPathFillRule fill_rule);
/**
* cogl_path_get_fill_rule:
*
2010-09-20 08:15:44 -04:00
* Retrieves the fill rule set using cogl_path_set_fill_rule().
*
* Return value: the fill rule that is used for the current path.
*
* Since: 1.4
*/
CoglPathFillRule
cogl_path_get_fill_rule (void);
/**
* cogl_path_fill:
*
* Fills the interior of the constructed shape using the current
* drawing color. The current path is then cleared. To use the path
* again, call cogl_path_fill_preserve() instead.
*
* The interior of the shape is determined using the fill rule of the
* path. See %CoglPathFillRule for details.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_fill (void);
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
/**
* cogl_path_fill_preserve:
*
* Fills the interior of the constructed shape using the current
* drawing color and preserves the path to be used again. See
* cogl_path_fill() for a description what is considered the interior
* of the shape.
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
*
* Since: 1.0
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_fill_preserve (void);
/**
* cogl_path_stroke:
*
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
* Strokes the constructed shape using the current drawing color and a
* width of 1 pixel (regardless of the current transformation
* matrix). To current path is then cleared. To use the path again,
* call cogl_path_stroke_preserve() instead.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_stroke (void);
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
/**
* cogl_path_stroke_preserve:
*
* Strokes the constructed shape using the current drawing color and
* preserves the path to be used again.
*
* Since: 1.0
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_stroke_preserve (void);
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
/**
* cogl_path_new:
*
* Clears the current path and starts a new one. Creating a new path
* also resets the fill rule to the default which is
* %COGL_PATH_FILL_RULE_EVEN_ODD.
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
*
* Since: 1.0
*/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_new (void);
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
/**
* cogl_path_move_to:
* @x: X coordinate of the pen location to move to.
* @y: Y coordinate of the pen location to move to.
*
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
* Moves the pen to the given location. If there is an existing path
* this will start a new disjoint subpath.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_move_to (float x,
float y);
/**
* cogl_path_rel_move_to:
* @x: X offset from the current pen location to move the pen to.
* @y: Y offset from the current pen location to move the pen to.
*
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
* Moves the pen to the given offset relative to the current pen
* location. If there is an existing path this will start a new
* disjoint subpath.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_rel_move_to (float x,
float y);
/**
* cogl_path_line_to:
* @x: X coordinate of the end line vertex
* @y: Y coordinate of the end line vertex
*
* Adds a straight line segment to the current path that ends at the
* given coordinates.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_line_to (float x,
float y);
/**
* cogl_path_rel_line_to:
* @x: X offset from the current pen location of the end line vertex
* @y: Y offset from the current pen location of the end line vertex
*
* Adds a straight line segment to the current path that ends at the
* given coordinates relative to the current pen location.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_rel_line_to (float x,
float y);
/**
* cogl_path_arc:
* @center_x: X coordinate of the elliptical arc center
* @center_y: Y coordinate of the elliptical arc center
* @radius_x: X radius of the elliptical arc
* @radius_y: Y radius of the elliptical arc
* @angle_1: Angle in degrees at which the arc begin
* @angle_2: Angle in degrees at which the arc ends
*
* Adds an elliptical arc segment to the current path. A straight line
* segment will link the current pen location with the first vertex
* of the arc. If you perform a move_to to the arcs start just before
* drawing it you create a free standing arc.
*
* The angles are measured in degrees where 0° is in the direction of
* the positive X axis and 90° is in the direction of the positive Y
* axis. The angle of the arc begins at @angle_1 and heads towards
* @angle_2 (so if @angle_2 is less than @angle_1 it will decrease,
* otherwise it will increase).
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_arc (float center_x,
float center_y,
float radius_x,
float radius_y,
float angle_1,
float angle_2);
/**
* cogl_path_curve_to:
* @x_1: X coordinate of the second bezier control point
* @y_1: Y coordinate of the second bezier control point
* @x_2: X coordinate of the third bezier control point
* @y_2: Y coordinate of the third bezier control point
* @x_3: X coordinate of the fourth bezier control point
* @y_3: Y coordinate of the fourth bezier control point
*
* Adds a cubic bezier curve segment to the current path with the given
* second, third and fourth control points and using current pen location
* as the first control point.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_curve_to (float x_1,
float y_1,
float x_2,
float y_2,
float x_3,
float y_3);
/**
* cogl_path_rel_curve_to:
* @x_1: X coordinate of the second bezier control point
* @y_1: Y coordinate of the second bezier control point
* @x_2: X coordinate of the third bezier control point
* @y_2: Y coordinate of the third bezier control point
* @x_3: X coordinate of the fourth bezier control point
* @y_3: Y coordinate of the fourth bezier control point
*
* Adds a cubic bezier curve segment to the current path with the given
* second, third and fourth control points and using current pen location
* as the first control point. The given coordinates are relative to the
* current pen location.
*/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_rel_curve_to (float x_1,
float y_1,
float x_2,
float y_2,
float x_3,
float y_3);
/**
* cogl_path_close:
*
* Closes the path being constructed by adding a straight line segment
* to it that ends at the first vertex of the path.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_close (void);
/**
* cogl_path_line:
* @x_1: X coordinate of the start line vertex
* @y_1: Y coordinate of the start line vertex
* @x_2: X coordinate of the end line vertex
* @y_2: Y coordinate of the end line vertex
*
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
* Constructs a straight line shape starting and ending at the given
* coordinates. If there is an existing path this will start a new
* disjoint sub-path.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_line (float x_1,
float y_1,
float x_2,
float y_2);
/**
* cogl_path_polyline:
* @coords: (in) (array) (transfer none): A pointer to the first element of an
* array of fixed-point values that specify the vertex coordinates.
* @num_points: The total number of vertices.
*
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
* Constructs a series of straight line segments, starting from the
* first given vertex coordinate. If there is an existing path this
* will start a new disjoint sub-path. Each subsequent segment starts
* where the previous one ended and ends at the next given vertex
* coordinate.
*
* The coords array must contain 2 * num_points values. The first value
* represents the X coordinate of the first vertex, the second value
* represents the Y coordinate of the first vertex, continuing in the same
* fashion for the rest of the vertices. (num_points - 1) segments will
* be constructed.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_polyline (const float *coords,
int num_points);
/**
* cogl_path_polygon:
* @coords: (in) (array) (transfer none): A pointer to the first element of
* an array of fixed-point values that specify the vertex coordinates.
* @num_points: The total number of vertices.
*
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
* Constructs a polygonal shape of the given number of vertices. If
* there is an existing path this will start a new disjoint sub-path.
*
* The coords array must contain 2 * num_points values. The first value
* represents the X coordinate of the first vertex, the second value
* represents the Y coordinate of the first vertex, continuing in the same
* fashion for the rest of the vertices.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_polygon (const float *coords,
int num_points);
/**
* cogl_path_rectangle:
* @x_1: X coordinate of the top-left corner.
* @y_1: Y coordinate of the top-left corner.
* @x_2: X coordinate of the bottom-right corner.
* @y_2: Y coordinate of the bottom-right corner.
*
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
* Constructs a rectangular shape at the given coordinates. If there
* is an existing path this will start a new disjoint sub-path.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_rectangle (float x_1,
float y_1,
float x_2,
float y_2);
/**
* cogl_path_ellipse:
* @center_x: X coordinate of the ellipse center
* @center_y: Y coordinate of the ellipse center
* @radius_x: X radius of the ellipse
* @radius_y: Y radius of the ellipse
*
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
* Constructs an ellipse shape. If there is an existing path this will
* start a new disjoint sub-path.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_ellipse (float center_x,
float center_y,
float radius_x,
float radius_y);
/**
* cogl_path_round_rectangle:
* @x_1: X coordinate of the top-left corner.
* @y_1: Y coordinate of the top-left corner.
* @x_2: X coordinate of the bottom-right corner.
* @y_2: Y coordinate of the bottom-right corner.
* @radius: Radius of the corner arcs.
* @arc_step: Angle increment resolution for subdivision of
* the corner arcs.
*
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
* Constructs a rectangular shape with rounded corners. If there is an
* existing path this will start a new disjoint sub-path.
**/
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
void
cogl_path_round_rectangle (float x_1,
float y_1,
float x_2,
float y_2,
float radius,
float arc_step);
/**
* cogl_get_path:
*
* Gets a pointer to the current path. The path can later be used
* again by calling cogl_path_set(). Note that the path isn't copied
* so if you later call any functions to add to the path it will
* affect the returned object too. No reference is taken on the path
* so if you want to retain it you should take your own reference with
* cogl_object_ref().
*
* Return value: a pointer to the current path.
*
* Since: 1.4
*/
CoglPath *
cogl_get_path (void);
/**
* cogl_set_path:
* @path: A #CoglPath object
*
* Replaces the current path with @path. A reference is taken on the
* object so if you no longer need the path you should unref with
* cogl_object_unref().
*
* Since: 1.4
*/
void
cogl_set_path (CoglPath *path);
/**
* cogl_path_copy:
* @path: A #CoglPath object
*
* Returns a new copy of the path in @path. The new path has a
* reference count of 1 so you should unref it with
* cogl_object_unref() if you no longer need it.
*
* Internally the path will share the data until one of the paths is
* modified so copying paths should be relatively cheap.
*
* Return value: a copy of the path in @path.
*/
CoglPath *
cogl_path_copy (CoglPath *path);
G_END_DECLS
#endif /* __COGL_PATH_H__ */