mutter/cogl/cogl.c

826 lines
21 KiB
C
Raw Normal View History

/*
* Cogl
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-22 01:28:54 +00:00
* A Low Level GPU Graphics and Utilities API
*
* Copyright (C) 2007,2008,2009,2010 Intel Corporation.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-22 01:28:54 +00:00
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-22 01:28:54 +00:00
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-22 01:28:54 +00:00
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*
*/
#include <config.h>
#include <string.h>
#include <math.h>
#include <stdlib.h>
#define COGL_VERSION_MIN_REQUIRED COGL_VERSION_1_4
#include "cogl-i18n-private.h"
#include "cogl-debug.h"
#include "cogl-util.h"
#include "cogl-context-private.h"
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
#include "cogl-pipeline-private.h"
#include "cogl-pipeline-opengl-private.h"
#include "cogl-winsys-private.h"
#include "cogl-framebuffer-private.h"
#include "cogl-matrix-private.h"
#include "cogl-journal-private.h"
#include "cogl-bitmap-private.h"
#include "cogl-texture-private.h"
#include "cogl-texture-driver.h"
#include "cogl-attribute-private.h"
#include "cogl-framebuffer-private.h"
#include "cogl-renderer-private.h"
#include "cogl-config-private.h"
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 11:17:09 +00:00
#include "cogl-private.h"
#include "cogl1-context.h"
#include "cogl-offscreen.h"
#include "cogl-attribute-gl-private.h"
Add a GL 3 driver This adds a new CoglDriver for GL 3 called COGL_DRIVER_GL3. When requested, the GLX, EGL and SDL2 winsyss will set the necessary attributes to request a forward-compatible core profile 3.1 context. That means it will have no deprecated features. To simplify the explosion of checks for specific combinations of context->driver, many of these conditionals have now been replaced with private feature flags that are checked instead. The GL and GLES drivers now initialise these private feature flags depending on which driver is used. The fixed function backends now explicitly check whether the fixed function private feature is available which means the GL3 driver will fall back to always using the GLSL progend. Since Rob's latest patches the GLSL progend no longer uses any fixed function API anyway so it should just work. The driver is currently lower priority than COGL_DRIVER_GL so it will not be used unless it is specificly requested. We may want to change this priority at some point because apparently Mesa can make some memory savings if a core profile context is used. In GL 3, getting the combined extensions string with glGetString is deprecated so this patch changes it to use glGetStringi to build up an array of extensions instead. _cogl_context_get_gl_extensions now returns this array instead of trying to return a const string. The caller is expected to free the array. Some issues with this patch: • GL 3 does not support GL_ALPHA format textures. We should probably make this a feature flag or something. Cogl uses this to render text which currently just throws a GL error and breaks so it's pretty important to do something about this before considering the GL3 driver to be stable. • GL 3 doesn't support client side vertex buffers. This probably doesn't matter because CoglBuffer won't normally use malloc'd buffers if VBOs are available, but it might but worth making malloc'd buffers a private feature and forcing it not to use them. • GL 3 doesn't support the default vertex array object. This patch just makes it create and bind a single non-default vertex array object which gets used just like the normal default object. Ideally it would be good to use vertex array objects properly and attach them to a CoglPrimitive to cache the state. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 66c9db993595b3a22e63f4c201ea468bc9b88cb6)
2012-09-26 19:32:36 +00:00
#include "cogl-clutter.h"
#include "deprecated/cogl-framebuffer-deprecated.h"
Intial Re-layout of the Cogl source code and introduction of a Cogl Winsys As part of an incremental process to have Cogl be a standalone project we want to re-consider how we organise the Cogl source code. Currently this is the structure I'm aiming for: cogl/ cogl/ <put common source here> winsys/ cogl-glx.c cogl-wgl.c driver/ gl/ gles/ os/ ? utils/ cogl-fixed cogl-matrix-stack? cogl-journal? cogl-primitives? pango/ The new winsys component is a starting point for migrating window system code (i.e. x11,glx,wgl,osx,egl etc) from Clutter to Cogl. The utils/ and pango/ directories aren't added by this commit, but they are noted because I plan to add them soon. Overview of the planned structure: * The winsys/ API is the API that binds OpenGL to a specific window system, be that X11 or win32 etc. Example are glx, wgl and egl. Much of the logic under clutter/{glx,osx,win32 etc} should migrate here. * Note there is also the idea of a winsys-base that may represent a window system for which there are multiple winsys APIs. An example of this is x11, since glx and egl may both be used with x11. (currently only Clutter has the idea of a winsys-base) * The driver/ represents a specific varient of OpenGL. Currently we have "gl" representing OpenGL 1.4-2.1 (mostly fixed function) and "gles" representing GLES 1.1 (fixed funciton) and 2.0 (fully shader based) * Everything under cogl/ should fundamentally be supporting access to the GPU. Essentially Cogl's most basic requirement is to provide a nice GPU Graphics API and drawing a line between this and the utility functionality we add to support Clutter should help keep this lean and maintainable. * Code under utils/ as suggested builds on cogl/ adding more convenient APIs or mechanism to optimize special cases. Broadly speaking you can compare cogl/ to OpenGL and utils/ to GLU. * clutter/pango will be moved to clutter/cogl/pango How some of the internal configure.ac/pkg-config terminology has changed: backendextra -> CLUTTER_WINSYS_BASE # e.g. "x11" backendextralib -> CLUTTER_WINSYS_BASE_LIB # e.g. "x11/libclutter-x11.la" clutterbackend -> {CLUTTER,COGL}_WINSYS # e.g. "glx" CLUTTER_FLAVOUR -> {CLUTTER,COGL}_WINSYS clutterbackendlib -> CLUTTER_WINSYS_LIB CLUTTER_COGL -> COGL_DRIVER # e.g. "gl" Note: The CLUTTER_FLAVOUR and CLUTTER_COGL defines are kept for apps As the first thing to take advantage of the new winsys component in Cogl; cogl_get_proc_address() has been moved from cogl/{gl,gles}/cogl.c into cogl/common/cogl.c and this common implementation first trys _cogl_winsys_get_proc_address() but if that fails then it falls back to gmodule.
2009-07-28 01:02:02 +00:00
CoglFuncPtr
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
cogl_get_proc_address (const char* name)
Intial Re-layout of the Cogl source code and introduction of a Cogl Winsys As part of an incremental process to have Cogl be a standalone project we want to re-consider how we organise the Cogl source code. Currently this is the structure I'm aiming for: cogl/ cogl/ <put common source here> winsys/ cogl-glx.c cogl-wgl.c driver/ gl/ gles/ os/ ? utils/ cogl-fixed cogl-matrix-stack? cogl-journal? cogl-primitives? pango/ The new winsys component is a starting point for migrating window system code (i.e. x11,glx,wgl,osx,egl etc) from Clutter to Cogl. The utils/ and pango/ directories aren't added by this commit, but they are noted because I plan to add them soon. Overview of the planned structure: * The winsys/ API is the API that binds OpenGL to a specific window system, be that X11 or win32 etc. Example are glx, wgl and egl. Much of the logic under clutter/{glx,osx,win32 etc} should migrate here. * Note there is also the idea of a winsys-base that may represent a window system for which there are multiple winsys APIs. An example of this is x11, since glx and egl may both be used with x11. (currently only Clutter has the idea of a winsys-base) * The driver/ represents a specific varient of OpenGL. Currently we have "gl" representing OpenGL 1.4-2.1 (mostly fixed function) and "gles" representing GLES 1.1 (fixed funciton) and 2.0 (fully shader based) * Everything under cogl/ should fundamentally be supporting access to the GPU. Essentially Cogl's most basic requirement is to provide a nice GPU Graphics API and drawing a line between this and the utility functionality we add to support Clutter should help keep this lean and maintainable. * Code under utils/ as suggested builds on cogl/ adding more convenient APIs or mechanism to optimize special cases. Broadly speaking you can compare cogl/ to OpenGL and utils/ to GLU. * clutter/pango will be moved to clutter/cogl/pango How some of the internal configure.ac/pkg-config terminology has changed: backendextra -> CLUTTER_WINSYS_BASE # e.g. "x11" backendextralib -> CLUTTER_WINSYS_BASE_LIB # e.g. "x11/libclutter-x11.la" clutterbackend -> {CLUTTER,COGL}_WINSYS # e.g. "glx" CLUTTER_FLAVOUR -> {CLUTTER,COGL}_WINSYS clutterbackendlib -> CLUTTER_WINSYS_LIB CLUTTER_COGL -> COGL_DRIVER # e.g. "gl" Note: The CLUTTER_FLAVOUR and CLUTTER_COGL defines are kept for apps As the first thing to take advantage of the new winsys component in Cogl; cogl_get_proc_address() has been moved from cogl/{gl,gles}/cogl.c into cogl/common/cogl.c and this common implementation first trys _cogl_winsys_get_proc_address() but if that fails then it falls back to gmodule.
2009-07-28 01:02:02 +00:00
{
_COGL_GET_CONTEXT (ctx, NULL);
Don't use eglGetProcAddress to retrieve core functions According to the EGL spec, eglGetProcAddress should only be used to retrieve extension functions. It also says that returning non-NULL does not mean the extension is available so you could interpret this as saying that the function is allowed to return garbage for core functions. This seems to happen at least for the Android implementation of EGL. To workaround this the winsys's are now passed down a flag to say whether the function is from the core API. This information is already in the gl-prototypes headers as the minimum core GL version and as a pair of flags to specify whether it is available in core GLES1 and GLES2. If the function is in core the EGL winsys will now avoid using eglGetProcAddress and always fallback to querying the library directly with the GModule API. The GLX winsys is left alone because glXGetProcAddress apparently supports querying core API and extension functions. The WGL winsys could ideally be changed because wglGetProcAddress should also only be used for extension functions but the situation is slightly different because WGL considers anything from GL > 1.1 to be an extension so it would need a bit more information to determine whether to query the function directly from the library. The SDL winsys is also left alone because it's not as easy to portably determine which GL library SDL has chosen to load in order to resolve the symbols directly. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 72089730ad06ccdd38a344279a893965ae68cec1) Since we aren't able to break API on the 1.12 branch cogl_get_proc_address is still supported but isn't easily able to determine whether the given name corresponds to a core symbol or not. For now we just assume the symbol being queried isn't part of the core GL api and update the documentation accordingly.
2012-06-20 11:42:31 +00:00
return _cogl_renderer_get_proc_address (ctx->display->renderer, name, FALSE);
Intial Re-layout of the Cogl source code and introduction of a Cogl Winsys As part of an incremental process to have Cogl be a standalone project we want to re-consider how we organise the Cogl source code. Currently this is the structure I'm aiming for: cogl/ cogl/ <put common source here> winsys/ cogl-glx.c cogl-wgl.c driver/ gl/ gles/ os/ ? utils/ cogl-fixed cogl-matrix-stack? cogl-journal? cogl-primitives? pango/ The new winsys component is a starting point for migrating window system code (i.e. x11,glx,wgl,osx,egl etc) from Clutter to Cogl. The utils/ and pango/ directories aren't added by this commit, but they are noted because I plan to add them soon. Overview of the planned structure: * The winsys/ API is the API that binds OpenGL to a specific window system, be that X11 or win32 etc. Example are glx, wgl and egl. Much of the logic under clutter/{glx,osx,win32 etc} should migrate here. * Note there is also the idea of a winsys-base that may represent a window system for which there are multiple winsys APIs. An example of this is x11, since glx and egl may both be used with x11. (currently only Clutter has the idea of a winsys-base) * The driver/ represents a specific varient of OpenGL. Currently we have "gl" representing OpenGL 1.4-2.1 (mostly fixed function) and "gles" representing GLES 1.1 (fixed funciton) and 2.0 (fully shader based) * Everything under cogl/ should fundamentally be supporting access to the GPU. Essentially Cogl's most basic requirement is to provide a nice GPU Graphics API and drawing a line between this and the utility functionality we add to support Clutter should help keep this lean and maintainable. * Code under utils/ as suggested builds on cogl/ adding more convenient APIs or mechanism to optimize special cases. Broadly speaking you can compare cogl/ to OpenGL and utils/ to GLU. * clutter/pango will be moved to clutter/cogl/pango How some of the internal configure.ac/pkg-config terminology has changed: backendextra -> CLUTTER_WINSYS_BASE # e.g. "x11" backendextralib -> CLUTTER_WINSYS_BASE_LIB # e.g. "x11/libclutter-x11.la" clutterbackend -> {CLUTTER,COGL}_WINSYS # e.g. "glx" CLUTTER_FLAVOUR -> {CLUTTER,COGL}_WINSYS clutterbackendlib -> CLUTTER_WINSYS_LIB CLUTTER_COGL -> COGL_DRIVER # e.g. "gl" Note: The CLUTTER_FLAVOUR and CLUTTER_COGL defines are kept for apps As the first thing to take advantage of the new winsys component in Cogl; cogl_get_proc_address() has been moved from cogl/{gl,gles}/cogl.c into cogl/common/cogl.c and this common implementation first trys _cogl_winsys_get_proc_address() but if that fails then it falls back to gmodule.
2009-07-28 01:02:02 +00:00
}
CoglBool
Add a GL 3 driver This adds a new CoglDriver for GL 3 called COGL_DRIVER_GL3. When requested, the GLX, EGL and SDL2 winsyss will set the necessary attributes to request a forward-compatible core profile 3.1 context. That means it will have no deprecated features. To simplify the explosion of checks for specific combinations of context->driver, many of these conditionals have now been replaced with private feature flags that are checked instead. The GL and GLES drivers now initialise these private feature flags depending on which driver is used. The fixed function backends now explicitly check whether the fixed function private feature is available which means the GL3 driver will fall back to always using the GLSL progend. Since Rob's latest patches the GLSL progend no longer uses any fixed function API anyway so it should just work. The driver is currently lower priority than COGL_DRIVER_GL so it will not be used unless it is specificly requested. We may want to change this priority at some point because apparently Mesa can make some memory savings if a core profile context is used. In GL 3, getting the combined extensions string with glGetString is deprecated so this patch changes it to use glGetStringi to build up an array of extensions instead. _cogl_context_get_gl_extensions now returns this array instead of trying to return a const string. The caller is expected to free the array. Some issues with this patch: • GL 3 does not support GL_ALPHA format textures. We should probably make this a feature flag or something. Cogl uses this to render text which currently just throws a GL error and breaks so it's pretty important to do something about this before considering the GL3 driver to be stable. • GL 3 doesn't support client side vertex buffers. This probably doesn't matter because CoglBuffer won't normally use malloc'd buffers if VBOs are available, but it might but worth making malloc'd buffers a private feature and forcing it not to use them. • GL 3 doesn't support the default vertex array object. This patch just makes it create and bind a single non-default vertex array object which gets used just like the normal default object. Ideally it would be good to use vertex array objects properly and attach them to a CoglPrimitive to cache the state. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 66c9db993595b3a22e63f4c201ea468bc9b88cb6)
2012-09-26 19:32:36 +00:00
_cogl_check_extension (const char *name, char * const *ext)
{
Add a GL 3 driver This adds a new CoglDriver for GL 3 called COGL_DRIVER_GL3. When requested, the GLX, EGL and SDL2 winsyss will set the necessary attributes to request a forward-compatible core profile 3.1 context. That means it will have no deprecated features. To simplify the explosion of checks for specific combinations of context->driver, many of these conditionals have now been replaced with private feature flags that are checked instead. The GL and GLES drivers now initialise these private feature flags depending on which driver is used. The fixed function backends now explicitly check whether the fixed function private feature is available which means the GL3 driver will fall back to always using the GLSL progend. Since Rob's latest patches the GLSL progend no longer uses any fixed function API anyway so it should just work. The driver is currently lower priority than COGL_DRIVER_GL so it will not be used unless it is specificly requested. We may want to change this priority at some point because apparently Mesa can make some memory savings if a core profile context is used. In GL 3, getting the combined extensions string with glGetString is deprecated so this patch changes it to use glGetStringi to build up an array of extensions instead. _cogl_context_get_gl_extensions now returns this array instead of trying to return a const string. The caller is expected to free the array. Some issues with this patch: • GL 3 does not support GL_ALPHA format textures. We should probably make this a feature flag or something. Cogl uses this to render text which currently just throws a GL error and breaks so it's pretty important to do something about this before considering the GL3 driver to be stable. • GL 3 doesn't support client side vertex buffers. This probably doesn't matter because CoglBuffer won't normally use malloc'd buffers if VBOs are available, but it might but worth making malloc'd buffers a private feature and forcing it not to use them. • GL 3 doesn't support the default vertex array object. This patch just makes it create and bind a single non-default vertex array object which gets used just like the normal default object. Ideally it would be good to use vertex array objects properly and attach them to a CoglPrimitive to cache the state. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 66c9db993595b3a22e63f4c201ea468bc9b88cb6)
2012-09-26 19:32:36 +00:00
while (*ext)
if (!strcmp (name, *ext))
return TRUE;
else
ext++;
return FALSE;
}
/* XXX: This has been deprecated as public API */
CoglBool
cogl_check_extension (const char *name, const char *ext)
{
Add a GL 3 driver This adds a new CoglDriver for GL 3 called COGL_DRIVER_GL3. When requested, the GLX, EGL and SDL2 winsyss will set the necessary attributes to request a forward-compatible core profile 3.1 context. That means it will have no deprecated features. To simplify the explosion of checks for specific combinations of context->driver, many of these conditionals have now been replaced with private feature flags that are checked instead. The GL and GLES drivers now initialise these private feature flags depending on which driver is used. The fixed function backends now explicitly check whether the fixed function private feature is available which means the GL3 driver will fall back to always using the GLSL progend. Since Rob's latest patches the GLSL progend no longer uses any fixed function API anyway so it should just work. The driver is currently lower priority than COGL_DRIVER_GL so it will not be used unless it is specificly requested. We may want to change this priority at some point because apparently Mesa can make some memory savings if a core profile context is used. In GL 3, getting the combined extensions string with glGetString is deprecated so this patch changes it to use glGetStringi to build up an array of extensions instead. _cogl_context_get_gl_extensions now returns this array instead of trying to return a const string. The caller is expected to free the array. Some issues with this patch: • GL 3 does not support GL_ALPHA format textures. We should probably make this a feature flag or something. Cogl uses this to render text which currently just throws a GL error and breaks so it's pretty important to do something about this before considering the GL3 driver to be stable. • GL 3 doesn't support client side vertex buffers. This probably doesn't matter because CoglBuffer won't normally use malloc'd buffers if VBOs are available, but it might but worth making malloc'd buffers a private feature and forcing it not to use them. • GL 3 doesn't support the default vertex array object. This patch just makes it create and bind a single non-default vertex array object which gets used just like the normal default object. Ideally it would be good to use vertex array objects properly and attach them to a CoglPrimitive to cache the state. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 66c9db993595b3a22e63f4c201ea468bc9b88cb6)
2012-09-26 19:32:36 +00:00
return cogl_clutter_check_extension (name, ext);
}
/* XXX: it's expected that we'll deprecated this with
* cogl_framebuffer_clear at some point. */
void
cogl_clear (const CoglColor *color, unsigned long buffers)
{
cogl_framebuffer_clear (cogl_get_draw_framebuffer (), buffers, color);
}
/* XXX: This API has been deprecated */
void
cogl_set_depth_test_enabled (CoglBool setting)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
[cogl] Improving Cogl journal to minimize driver overheads + GPU state changes Previously the journal was always flushed at the end of _cogl_rectangles_with_multitexture_coords, (i.e. the end of any cogl_rectangle* calls) but now we have broadened the potential for batching geometry. In ideal circumstances we will only flush once per scene. In summary the journal works like this: When you use any of the cogl_rectangle* APIs then nothing is emitted to the GPU at this point, we just log one or more quads into the journal. A journal entry consists of the quad coordinates, an associated material reference, and a modelview matrix. Ideally the journal only gets flushed once at the end of a scene, but in fact there are things to consider that may cause unwanted flushing, including: - modifying materials mid-scene This is because each quad in the journal has an associated material reference (i.e. not copy), so if you try and modify a material that is already referenced in the journal we force a flush first) NOTE: For now this means you should avoid using cogl_set_source_color() since that currently uses a single shared material. Later we should change it to use a pool of materials that is recycled when the journal is flushed. - modifying any state that isn't currently logged, such as depth, fog and backface culling enables. The first thing that happens when flushing, is to upload all the vertex data associated with the journal into a single VBO. We then go through a process of splitting up the journal into batches that have compatible state so they can be emitted to the GPU together. This is currently broken up into 3 levels so we can stagger the state changes: 1) we break the journal up according to changes in the number of material layers associated with logged quads. The number of layers in a material determines the stride of the associated vertices, so we have to update our vertex array offsets at this level. (i.e. calling gl{Vertex,Color},Pointer etc) 2) we further split batches up according to material compatability. (e.g. materials with different textures) We flush material state at this level. 3) Finally we split batches up according to modelview changes. At this level we update the modelview matrix and actually emit the actual draw command. This commit is largely about putting the initial design in-place; this will be followed by other changes that take advantage of the extended batching.
2009-06-17 17:46:42 +00:00
if (ctx->legacy_depth_test_enabled == setting)
return;
ctx->legacy_depth_test_enabled = setting;
if (ctx->legacy_depth_test_enabled)
ctx->legacy_state_set++;
else
ctx->legacy_state_set--;
}
/* XXX: This API has been deprecated */
CoglBool
cogl_get_depth_test_enabled (void)
{
_COGL_GET_CONTEXT (ctx, FALSE);
return ctx->legacy_depth_test_enabled;
}
void
cogl_set_backface_culling_enabled (CoglBool setting)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (ctx->legacy_backface_culling_enabled == setting)
return;
ctx->legacy_backface_culling_enabled = setting;
[cogl] Improving Cogl journal to minimize driver overheads + GPU state changes Previously the journal was always flushed at the end of _cogl_rectangles_with_multitexture_coords, (i.e. the end of any cogl_rectangle* calls) but now we have broadened the potential for batching geometry. In ideal circumstances we will only flush once per scene. In summary the journal works like this: When you use any of the cogl_rectangle* APIs then nothing is emitted to the GPU at this point, we just log one or more quads into the journal. A journal entry consists of the quad coordinates, an associated material reference, and a modelview matrix. Ideally the journal only gets flushed once at the end of a scene, but in fact there are things to consider that may cause unwanted flushing, including: - modifying materials mid-scene This is because each quad in the journal has an associated material reference (i.e. not copy), so if you try and modify a material that is already referenced in the journal we force a flush first) NOTE: For now this means you should avoid using cogl_set_source_color() since that currently uses a single shared material. Later we should change it to use a pool of materials that is recycled when the journal is flushed. - modifying any state that isn't currently logged, such as depth, fog and backface culling enables. The first thing that happens when flushing, is to upload all the vertex data associated with the journal into a single VBO. We then go through a process of splitting up the journal into batches that have compatible state so they can be emitted to the GPU together. This is currently broken up into 3 levels so we can stagger the state changes: 1) we break the journal up according to changes in the number of material layers associated with logged quads. The number of layers in a material determines the stride of the associated vertices, so we have to update our vertex array offsets at this level. (i.e. calling gl{Vertex,Color},Pointer etc) 2) we further split batches up according to material compatability. (e.g. materials with different textures) We flush material state at this level. 3) Finally we split batches up according to modelview changes. At this level we update the modelview matrix and actually emit the actual draw command. This commit is largely about putting the initial design in-place; this will be followed by other changes that take advantage of the extended batching.
2009-06-17 17:46:42 +00:00
if (ctx->legacy_backface_culling_enabled)
ctx->legacy_state_set++;
else
ctx->legacy_state_set--;
}
CoglBool
cogl_get_backface_culling_enabled (void)
{
_COGL_GET_CONTEXT (ctx, FALSE);
return ctx->legacy_backface_culling_enabled;
}
void
cogl_set_source_color (const CoglColor *color)
{
CoglPipeline *pipeline;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (cogl_color_get_alpha_byte (color) == 0xff)
{
cogl_pipeline_set_color (ctx->opaque_color_pipeline, color);
pipeline = ctx->opaque_color_pipeline;
}
else
{
CoglColor premultiplied = *color;
cogl_color_premultiply (&premultiplied);
cogl_pipeline_set_color (ctx->blended_color_pipeline, &premultiplied);
pipeline = ctx->blended_color_pipeline;
}
cogl_set_source (pipeline);
}
void
cogl_set_viewport (int x,
int y,
int width,
int height)
{
CoglFramebuffer *framebuffer;
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
framebuffer = cogl_get_draw_framebuffer ();
cogl_framebuffer_set_viewport (framebuffer,
x,
y,
width,
height);
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
}
/* XXX: This should be deprecated, and we should expose a way to also
* specify an x and y viewport offset */
void
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
cogl_viewport (unsigned int width,
unsigned int height)
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
{
cogl_set_viewport (0, 0, width, height);
}
CoglFeatureFlags
cogl_get_features (void)
{
_COGL_GET_CONTEXT (ctx, 0);
return ctx->feature_flags;
}
CoglBool
cogl_features_available (CoglFeatureFlags features)
{
_COGL_GET_CONTEXT (ctx, 0);
return (ctx->feature_flags & features) == features;
}
CoglBool
cogl_has_feature (CoglContext *ctx, CoglFeatureID feature)
{
return COGL_FLAGS_GET (ctx->features, feature);
}
CoglBool
cogl_has_features (CoglContext *ctx, ...)
{
va_list args;
CoglFeatureID feature;
va_start (args, ctx);
while ((feature = va_arg (args, CoglFeatureID)))
if (!cogl_has_feature (ctx, feature))
return FALSE;
va_end (args);
return TRUE;
}
void
cogl_foreach_feature (CoglContext *ctx,
CoglFeatureCallback callback,
void *user_data)
{
int i;
for (i = 0; i < _COGL_N_FEATURE_IDS; i++)
if (COGL_FLAGS_GET (ctx->features, i))
callback (i, user_data);
}
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
/* XXX: This function should either be replaced with one returning
* integers, or removed/deprecated and make the
* _cogl_framebuffer_get_viewport* functions public.
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
*/
void
cogl_get_viewport (float viewport[4])
{
CoglFramebuffer *framebuffer;
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
framebuffer = cogl_get_draw_framebuffer ();
cogl_framebuffer_get_viewport4fv (framebuffer, viewport);
}
void
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
cogl_get_bitmasks (int *red,
int *green,
int *blue,
int *alpha)
{
CoglFramebuffer *framebuffer;
framebuffer = cogl_get_draw_framebuffer ();
if (red)
*red = cogl_framebuffer_get_red_bits (framebuffer);
if (green)
*green = cogl_framebuffer_get_green_bits (framebuffer);
if (blue)
*blue = cogl_framebuffer_get_blue_bits (framebuffer);
if (alpha)
*alpha = cogl_framebuffer_get_alpha_bits (framebuffer);
}
void
cogl_set_fog (const CoglColor *fog_color,
CoglFogMode mode,
float density,
float z_near,
float z_far)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (ctx->legacy_fog_state.enabled == FALSE)
ctx->legacy_state_set++;
ctx->legacy_fog_state.enabled = TRUE;
ctx->legacy_fog_state.color = *fog_color;
ctx->legacy_fog_state.mode = mode;
ctx->legacy_fog_state.density = density;
ctx->legacy_fog_state.z_near = z_near;
ctx->legacy_fog_state.z_far = z_far;
}
void
cogl_disable_fog (void)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (ctx->legacy_fog_state.enabled == TRUE)
ctx->legacy_state_set--;
[cogl] Improving Cogl journal to minimize driver overheads + GPU state changes Previously the journal was always flushed at the end of _cogl_rectangles_with_multitexture_coords, (i.e. the end of any cogl_rectangle* calls) but now we have broadened the potential for batching geometry. In ideal circumstances we will only flush once per scene. In summary the journal works like this: When you use any of the cogl_rectangle* APIs then nothing is emitted to the GPU at this point, we just log one or more quads into the journal. A journal entry consists of the quad coordinates, an associated material reference, and a modelview matrix. Ideally the journal only gets flushed once at the end of a scene, but in fact there are things to consider that may cause unwanted flushing, including: - modifying materials mid-scene This is because each quad in the journal has an associated material reference (i.e. not copy), so if you try and modify a material that is already referenced in the journal we force a flush first) NOTE: For now this means you should avoid using cogl_set_source_color() since that currently uses a single shared material. Later we should change it to use a pool of materials that is recycled when the journal is flushed. - modifying any state that isn't currently logged, such as depth, fog and backface culling enables. The first thing that happens when flushing, is to upload all the vertex data associated with the journal into a single VBO. We then go through a process of splitting up the journal into batches that have compatible state so they can be emitted to the GPU together. This is currently broken up into 3 levels so we can stagger the state changes: 1) we break the journal up according to changes in the number of material layers associated with logged quads. The number of layers in a material determines the stride of the associated vertices, so we have to update our vertex array offsets at this level. (i.e. calling gl{Vertex,Color},Pointer etc) 2) we further split batches up according to material compatability. (e.g. materials with different textures) We flush material state at this level. 3) Finally we split batches up according to modelview changes. At this level we update the modelview matrix and actually emit the actual draw command. This commit is largely about putting the initial design in-place; this will be followed by other changes that take advantage of the extended batching.
2009-06-17 17:46:42 +00:00
ctx->legacy_fog_state.enabled = FALSE;
}
[cogl] Improving Cogl journal to minimize driver overheads + GPU state changes Previously the journal was always flushed at the end of _cogl_rectangles_with_multitexture_coords, (i.e. the end of any cogl_rectangle* calls) but now we have broadened the potential for batching geometry. In ideal circumstances we will only flush once per scene. In summary the journal works like this: When you use any of the cogl_rectangle* APIs then nothing is emitted to the GPU at this point, we just log one or more quads into the journal. A journal entry consists of the quad coordinates, an associated material reference, and a modelview matrix. Ideally the journal only gets flushed once at the end of a scene, but in fact there are things to consider that may cause unwanted flushing, including: - modifying materials mid-scene This is because each quad in the journal has an associated material reference (i.e. not copy), so if you try and modify a material that is already referenced in the journal we force a flush first) NOTE: For now this means you should avoid using cogl_set_source_color() since that currently uses a single shared material. Later we should change it to use a pool of materials that is recycled when the journal is flushed. - modifying any state that isn't currently logged, such as depth, fog and backface culling enables. The first thing that happens when flushing, is to upload all the vertex data associated with the journal into a single VBO. We then go through a process of splitting up the journal into batches that have compatible state so they can be emitted to the GPU together. This is currently broken up into 3 levels so we can stagger the state changes: 1) we break the journal up according to changes in the number of material layers associated with logged quads. The number of layers in a material determines the stride of the associated vertices, so we have to update our vertex array offsets at this level. (i.e. calling gl{Vertex,Color},Pointer etc) 2) we further split batches up according to material compatability. (e.g. materials with different textures) We flush material state at this level. 3) Finally we split batches up according to modelview changes. At this level we update the modelview matrix and actually emit the actual draw command. This commit is largely about putting the initial design in-place; this will be followed by other changes that take advantage of the extended batching.
2009-06-17 17:46:42 +00:00
void
cogl_flush (void)
[cogl] Improving Cogl journal to minimize driver overheads + GPU state changes Previously the journal was always flushed at the end of _cogl_rectangles_with_multitexture_coords, (i.e. the end of any cogl_rectangle* calls) but now we have broadened the potential for batching geometry. In ideal circumstances we will only flush once per scene. In summary the journal works like this: When you use any of the cogl_rectangle* APIs then nothing is emitted to the GPU at this point, we just log one or more quads into the journal. A journal entry consists of the quad coordinates, an associated material reference, and a modelview matrix. Ideally the journal only gets flushed once at the end of a scene, but in fact there are things to consider that may cause unwanted flushing, including: - modifying materials mid-scene This is because each quad in the journal has an associated material reference (i.e. not copy), so if you try and modify a material that is already referenced in the journal we force a flush first) NOTE: For now this means you should avoid using cogl_set_source_color() since that currently uses a single shared material. Later we should change it to use a pool of materials that is recycled when the journal is flushed. - modifying any state that isn't currently logged, such as depth, fog and backface culling enables. The first thing that happens when flushing, is to upload all the vertex data associated with the journal into a single VBO. We then go through a process of splitting up the journal into batches that have compatible state so they can be emitted to the GPU together. This is currently broken up into 3 levels so we can stagger the state changes: 1) we break the journal up according to changes in the number of material layers associated with logged quads. The number of layers in a material determines the stride of the associated vertices, so we have to update our vertex array offsets at this level. (i.e. calling gl{Vertex,Color},Pointer etc) 2) we further split batches up according to material compatability. (e.g. materials with different textures) We flush material state at this level. 3) Finally we split batches up according to modelview changes. At this level we update the modelview matrix and actually emit the actual draw command. This commit is largely about putting the initial design in-place; this will be followed by other changes that take advantage of the extended batching.
2009-06-17 17:46:42 +00:00
{
GList *l;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
for (l = ctx->framebuffers; l; l = l->next)
_cogl_framebuffer_flush_journal (l->data);
[cogl] Improving Cogl journal to minimize driver overheads + GPU state changes Previously the journal was always flushed at the end of _cogl_rectangles_with_multitexture_coords, (i.e. the end of any cogl_rectangle* calls) but now we have broadened the potential for batching geometry. In ideal circumstances we will only flush once per scene. In summary the journal works like this: When you use any of the cogl_rectangle* APIs then nothing is emitted to the GPU at this point, we just log one or more quads into the journal. A journal entry consists of the quad coordinates, an associated material reference, and a modelview matrix. Ideally the journal only gets flushed once at the end of a scene, but in fact there are things to consider that may cause unwanted flushing, including: - modifying materials mid-scene This is because each quad in the journal has an associated material reference (i.e. not copy), so if you try and modify a material that is already referenced in the journal we force a flush first) NOTE: For now this means you should avoid using cogl_set_source_color() since that currently uses a single shared material. Later we should change it to use a pool of materials that is recycled when the journal is flushed. - modifying any state that isn't currently logged, such as depth, fog and backface culling enables. The first thing that happens when flushing, is to upload all the vertex data associated with the journal into a single VBO. We then go through a process of splitting up the journal into batches that have compatible state so they can be emitted to the GPU together. This is currently broken up into 3 levels so we can stagger the state changes: 1) we break the journal up according to changes in the number of material layers associated with logged quads. The number of layers in a material determines the stride of the associated vertices, so we have to update our vertex array offsets at this level. (i.e. calling gl{Vertex,Color},Pointer etc) 2) we further split batches up according to material compatability. (e.g. materials with different textures) We flush material state at this level. 3) Finally we split batches up according to modelview changes. At this level we update the modelview matrix and actually emit the actual draw command. This commit is largely about putting the initial design in-place; this will be followed by other changes that take advantage of the extended batching.
2009-06-17 17:46:42 +00:00
}
void
cogl_read_pixels (int x,
int y,
int width,
int height,
CoglReadPixelsFlags source,
CoglPixelFormat format,
uint8_t *pixels)
{
int bpp = _cogl_pixel_format_get_bytes_per_pixel (format);
CoglBitmap *bitmap;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
bitmap = cogl_bitmap_new_for_data (ctx,
width, height,
format,
bpp * width, /* rowstride */
pixels);
cogl_framebuffer_read_pixels_into_bitmap (_cogl_get_read_framebuffer (),
x, y,
source,
bitmap);
cogl_object_unref (bitmap);
}
[cogl] Improve ability to break out into raw OpenGL via begin/end mechanism Although we wouldn't recommend developers try and interleve OpenGL drawing with Cogl drawing - we would prefer patches that improve Cogl to avoid this if possible - we are providing a simple mechanism that will at least give developers a fighting chance if they find it necissary. Note: we aren't helping developers change OpenGL state to modify the behaviour of Cogl drawing functions - it's unlikley that can ever be reliably supported - but if they are trying to do something like: - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. - continue using Cogl to draw They should surround their blocks of raw OpenGL with cogl_begin_gl() and cogl_end_gl(): cogl_begin_gl (); - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. cogl_end_gl (); - continue using Cogl to draw Again; we aren't supporting code like this: - setup some OpenGL state. - use Cogl to draw - reset modified OpenGL state. When the internals of Cogl evolves, this is very liable to break. cogl_begin_gl() will flush all internally batched Cogl primitives, and emit all internal Cogl state to OpenGL as if it were going to draw something itself. The result is that the OpenGL modelview matrix will be setup; the state corresponding to the current source material will be setup and other world state such as backface culling, depth and fogging enabledness will be also be sent to OpenGL. Note: no special material state is flushed, so if developers want Cogl to setup a simplified material state it is the their responsibility to set a simple source material before calling cogl_begin_gl. E.g. by calling cogl_set_source_color4ub(). Note: It is the developers responsibility to restore any OpenGL state that they modify to how it was after calling cogl_begin_gl() if they don't do this then the result of further Cogl calls is undefined.
2009-06-29 21:32:05 +00:00
void
cogl_begin_gl (void)
{
cogl-shader: Prepend boilerplate for portable shaders We now prepend a set of defines to any given GLSL shader so that we can define builtin uniforms/attributes within the "cogl" namespace that we can use to provide compatibility across a range of the earlier versions of GLSL. This updates test-cogl-shader-glsl.c and test-shader.c so they no longer needs to special case GLES vs GL when splicing together its shaders as well as the blur, colorize and desaturate effects. To get a feel for the new, portable uniform/attribute names here are the defines for OpenGL vertex shaders: #define cogl_position_in gl_Vertex #define cogl_color_in gl_Color #define cogl_tex_coord_in gl_MultiTexCoord0 #define cogl_tex_coord0_in gl_MultiTexCoord0 #define cogl_tex_coord1_in gl_MultiTexCoord1 #define cogl_tex_coord2_in gl_MultiTexCoord2 #define cogl_tex_coord3_in gl_MultiTexCoord3 #define cogl_tex_coord4_in gl_MultiTexCoord4 #define cogl_tex_coord5_in gl_MultiTexCoord5 #define cogl_tex_coord6_in gl_MultiTexCoord6 #define cogl_tex_coord7_in gl_MultiTexCoord7 #define cogl_normal_in gl_Normal #define cogl_position_out gl_Position #define cogl_point_size_out gl_PointSize #define cogl_color_out gl_FrontColor #define cogl_tex_coord_out gl_TexCoord #define cogl_modelview_matrix gl_ModelViewMatrix #define cogl_modelview_projection_matrix gl_ModelViewProjectionMatrix #define cogl_projection_matrix gl_ProjectionMatrix #define cogl_texture_matrix gl_TextureMatrix And for fragment shaders we have: #define cogl_color_in gl_Color #define cogl_tex_coord_in gl_TexCoord #define cogl_color_out gl_FragColor #define cogl_depth_out gl_FragDepth #define cogl_front_facing gl_FrontFacing
2010-07-23 16:46:41 +00:00
CoglPipeline *pipeline;
[cogl] Improve ability to break out into raw OpenGL via begin/end mechanism Although we wouldn't recommend developers try and interleve OpenGL drawing with Cogl drawing - we would prefer patches that improve Cogl to avoid this if possible - we are providing a simple mechanism that will at least give developers a fighting chance if they find it necissary. Note: we aren't helping developers change OpenGL state to modify the behaviour of Cogl drawing functions - it's unlikley that can ever be reliably supported - but if they are trying to do something like: - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. - continue using Cogl to draw They should surround their blocks of raw OpenGL with cogl_begin_gl() and cogl_end_gl(): cogl_begin_gl (); - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. cogl_end_gl (); - continue using Cogl to draw Again; we aren't supporting code like this: - setup some OpenGL state. - use Cogl to draw - reset modified OpenGL state. When the internals of Cogl evolves, this is very liable to break. cogl_begin_gl() will flush all internally batched Cogl primitives, and emit all internal Cogl state to OpenGL as if it were going to draw something itself. The result is that the OpenGL modelview matrix will be setup; the state corresponding to the current source material will be setup and other world state such as backface culling, depth and fogging enabledness will be also be sent to OpenGL. Note: no special material state is flushed, so if developers want Cogl to setup a simplified material state it is the their responsibility to set a simple source material before calling cogl_begin_gl. E.g. by calling cogl_set_source_color4ub(). Note: It is the developers responsibility to restore any OpenGL state that they modify to how it was after calling cogl_begin_gl() if they don't do this then the result of further Cogl calls is undefined.
2009-06-29 21:32:05 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (ctx->in_begin_gl_block)
{
static CoglBool shown = FALSE;
[cogl] Improve ability to break out into raw OpenGL via begin/end mechanism Although we wouldn't recommend developers try and interleve OpenGL drawing with Cogl drawing - we would prefer patches that improve Cogl to avoid this if possible - we are providing a simple mechanism that will at least give developers a fighting chance if they find it necissary. Note: we aren't helping developers change OpenGL state to modify the behaviour of Cogl drawing functions - it's unlikley that can ever be reliably supported - but if they are trying to do something like: - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. - continue using Cogl to draw They should surround their blocks of raw OpenGL with cogl_begin_gl() and cogl_end_gl(): cogl_begin_gl (); - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. cogl_end_gl (); - continue using Cogl to draw Again; we aren't supporting code like this: - setup some OpenGL state. - use Cogl to draw - reset modified OpenGL state. When the internals of Cogl evolves, this is very liable to break. cogl_begin_gl() will flush all internally batched Cogl primitives, and emit all internal Cogl state to OpenGL as if it were going to draw something itself. The result is that the OpenGL modelview matrix will be setup; the state corresponding to the current source material will be setup and other world state such as backface culling, depth and fogging enabledness will be also be sent to OpenGL. Note: no special material state is flushed, so if developers want Cogl to setup a simplified material state it is the their responsibility to set a simple source material before calling cogl_begin_gl. E.g. by calling cogl_set_source_color4ub(). Note: It is the developers responsibility to restore any OpenGL state that they modify to how it was after calling cogl_begin_gl() if they don't do this then the result of further Cogl calls is undefined.
2009-06-29 21:32:05 +00:00
if (!shown)
g_warning ("You should not nest cogl_begin_gl/cogl_end_gl blocks");
shown = TRUE;
return;
}
ctx->in_begin_gl_block = TRUE;
/* Flush all batched primitives */
cogl_flush ();
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
/* Flush framebuffer state, including clip state, modelview and
* projection matrix state
*
* NB: _cogl_framebuffer_flush_state may disrupt various state (such
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* as the pipeline state) when flushing the clip stack, so should
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
* always be done first when preparing to draw. */
_cogl_framebuffer_flush_state (cogl_get_draw_framebuffer (),
_cogl_get_read_framebuffer (),
COGL_FRAMEBUFFER_STATE_ALL);
[cogl] Improve ability to break out into raw OpenGL via begin/end mechanism Although we wouldn't recommend developers try and interleve OpenGL drawing with Cogl drawing - we would prefer patches that improve Cogl to avoid this if possible - we are providing a simple mechanism that will at least give developers a fighting chance if they find it necissary. Note: we aren't helping developers change OpenGL state to modify the behaviour of Cogl drawing functions - it's unlikley that can ever be reliably supported - but if they are trying to do something like: - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. - continue using Cogl to draw They should surround their blocks of raw OpenGL with cogl_begin_gl() and cogl_end_gl(): cogl_begin_gl (); - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. cogl_end_gl (); - continue using Cogl to draw Again; we aren't supporting code like this: - setup some OpenGL state. - use Cogl to draw - reset modified OpenGL state. When the internals of Cogl evolves, this is very liable to break. cogl_begin_gl() will flush all internally batched Cogl primitives, and emit all internal Cogl state to OpenGL as if it were going to draw something itself. The result is that the OpenGL modelview matrix will be setup; the state corresponding to the current source material will be setup and other world state such as backface culling, depth and fogging enabledness will be also be sent to OpenGL. Note: no special material state is flushed, so if developers want Cogl to setup a simplified material state it is the their responsibility to set a simple source material before calling cogl_begin_gl. E.g. by calling cogl_set_source_color4ub(). Note: It is the developers responsibility to restore any OpenGL state that they modify to how it was after calling cogl_begin_gl() if they don't do this then the result of further Cogl calls is undefined.
2009-06-29 21:32:05 +00:00
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
/* Setup the state for the current pipeline */
[cogl] Improve ability to break out into raw OpenGL via begin/end mechanism Although we wouldn't recommend developers try and interleve OpenGL drawing with Cogl drawing - we would prefer patches that improve Cogl to avoid this if possible - we are providing a simple mechanism that will at least give developers a fighting chance if they find it necissary. Note: we aren't helping developers change OpenGL state to modify the behaviour of Cogl drawing functions - it's unlikley that can ever be reliably supported - but if they are trying to do something like: - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. - continue using Cogl to draw They should surround their blocks of raw OpenGL with cogl_begin_gl() and cogl_end_gl(): cogl_begin_gl (); - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. cogl_end_gl (); - continue using Cogl to draw Again; we aren't supporting code like this: - setup some OpenGL state. - use Cogl to draw - reset modified OpenGL state. When the internals of Cogl evolves, this is very liable to break. cogl_begin_gl() will flush all internally batched Cogl primitives, and emit all internal Cogl state to OpenGL as if it were going to draw something itself. The result is that the OpenGL modelview matrix will be setup; the state corresponding to the current source material will be setup and other world state such as backface culling, depth and fogging enabledness will be also be sent to OpenGL. Note: no special material state is flushed, so if developers want Cogl to setup a simplified material state it is the their responsibility to set a simple source material before calling cogl_begin_gl. E.g. by calling cogl_set_source_color4ub(). Note: It is the developers responsibility to restore any OpenGL state that they modify to how it was after calling cogl_begin_gl() if they don't do this then the result of further Cogl calls is undefined.
2009-06-29 21:32:05 +00:00
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
/* We considered flushing a specific, minimal pipeline here to try and
[cogl] Improve ability to break out into raw OpenGL via begin/end mechanism Although we wouldn't recommend developers try and interleve OpenGL drawing with Cogl drawing - we would prefer patches that improve Cogl to avoid this if possible - we are providing a simple mechanism that will at least give developers a fighting chance if they find it necissary. Note: we aren't helping developers change OpenGL state to modify the behaviour of Cogl drawing functions - it's unlikley that can ever be reliably supported - but if they are trying to do something like: - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. - continue using Cogl to draw They should surround their blocks of raw OpenGL with cogl_begin_gl() and cogl_end_gl(): cogl_begin_gl (); - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. cogl_end_gl (); - continue using Cogl to draw Again; we aren't supporting code like this: - setup some OpenGL state. - use Cogl to draw - reset modified OpenGL state. When the internals of Cogl evolves, this is very liable to break. cogl_begin_gl() will flush all internally batched Cogl primitives, and emit all internal Cogl state to OpenGL as if it were going to draw something itself. The result is that the OpenGL modelview matrix will be setup; the state corresponding to the current source material will be setup and other world state such as backface culling, depth and fogging enabledness will be also be sent to OpenGL. Note: no special material state is flushed, so if developers want Cogl to setup a simplified material state it is the their responsibility to set a simple source material before calling cogl_begin_gl. E.g. by calling cogl_set_source_color4ub(). Note: It is the developers responsibility to restore any OpenGL state that they modify to how it was after calling cogl_begin_gl() if they don't do this then the result of further Cogl calls is undefined.
2009-06-29 21:32:05 +00:00
* simplify the GL state, but decided to avoid special cases and second
* guessing what would be actually helpful.
*
* A user should instead call cogl_set_source_color4ub() before
* cogl_begin_gl() to simplify the state flushed.
cogl-shader: Prepend boilerplate for portable shaders We now prepend a set of defines to any given GLSL shader so that we can define builtin uniforms/attributes within the "cogl" namespace that we can use to provide compatibility across a range of the earlier versions of GLSL. This updates test-cogl-shader-glsl.c and test-shader.c so they no longer needs to special case GLES vs GL when splicing together its shaders as well as the blur, colorize and desaturate effects. To get a feel for the new, portable uniform/attribute names here are the defines for OpenGL vertex shaders: #define cogl_position_in gl_Vertex #define cogl_color_in gl_Color #define cogl_tex_coord_in gl_MultiTexCoord0 #define cogl_tex_coord0_in gl_MultiTexCoord0 #define cogl_tex_coord1_in gl_MultiTexCoord1 #define cogl_tex_coord2_in gl_MultiTexCoord2 #define cogl_tex_coord3_in gl_MultiTexCoord3 #define cogl_tex_coord4_in gl_MultiTexCoord4 #define cogl_tex_coord5_in gl_MultiTexCoord5 #define cogl_tex_coord6_in gl_MultiTexCoord6 #define cogl_tex_coord7_in gl_MultiTexCoord7 #define cogl_normal_in gl_Normal #define cogl_position_out gl_Position #define cogl_point_size_out gl_PointSize #define cogl_color_out gl_FrontColor #define cogl_tex_coord_out gl_TexCoord #define cogl_modelview_matrix gl_ModelViewMatrix #define cogl_modelview_projection_matrix gl_ModelViewProjectionMatrix #define cogl_projection_matrix gl_ProjectionMatrix #define cogl_texture_matrix gl_TextureMatrix And for fragment shaders we have: #define cogl_color_in gl_Color #define cogl_tex_coord_in gl_TexCoord #define cogl_color_out gl_FragColor #define cogl_depth_out gl_FragDepth #define cogl_front_facing gl_FrontFacing
2010-07-23 16:46:41 +00:00
*
* XXX: note defining n_tex_coord_attribs using
* cogl_pipeline_get_n_layers is a hack, but the problem is that
* n_tex_coord_attribs is usually defined when drawing a primitive
* which isn't happening here.
*
cogl-shader: Prepend boilerplate for portable shaders We now prepend a set of defines to any given GLSL shader so that we can define builtin uniforms/attributes within the "cogl" namespace that we can use to provide compatibility across a range of the earlier versions of GLSL. This updates test-cogl-shader-glsl.c and test-shader.c so they no longer needs to special case GLES vs GL when splicing together its shaders as well as the blur, colorize and desaturate effects. To get a feel for the new, portable uniform/attribute names here are the defines for OpenGL vertex shaders: #define cogl_position_in gl_Vertex #define cogl_color_in gl_Color #define cogl_tex_coord_in gl_MultiTexCoord0 #define cogl_tex_coord0_in gl_MultiTexCoord0 #define cogl_tex_coord1_in gl_MultiTexCoord1 #define cogl_tex_coord2_in gl_MultiTexCoord2 #define cogl_tex_coord3_in gl_MultiTexCoord3 #define cogl_tex_coord4_in gl_MultiTexCoord4 #define cogl_tex_coord5_in gl_MultiTexCoord5 #define cogl_tex_coord6_in gl_MultiTexCoord6 #define cogl_tex_coord7_in gl_MultiTexCoord7 #define cogl_normal_in gl_Normal #define cogl_position_out gl_Position #define cogl_point_size_out gl_PointSize #define cogl_color_out gl_FrontColor #define cogl_tex_coord_out gl_TexCoord #define cogl_modelview_matrix gl_ModelViewMatrix #define cogl_modelview_projection_matrix gl_ModelViewProjectionMatrix #define cogl_projection_matrix gl_ProjectionMatrix #define cogl_texture_matrix gl_TextureMatrix And for fragment shaders we have: #define cogl_color_in gl_Color #define cogl_tex_coord_in gl_TexCoord #define cogl_color_out gl_FragColor #define cogl_depth_out gl_FragDepth #define cogl_front_facing gl_FrontFacing
2010-07-23 16:46:41 +00:00
* Maybe it would be more useful if this code did flush the
* opaque_color_pipeline and then call into cogl-pipeline-opengl.c to then
* restore all state for the material's backend back to default OpenGL
* values.
[cogl] Improve ability to break out into raw OpenGL via begin/end mechanism Although we wouldn't recommend developers try and interleve OpenGL drawing with Cogl drawing - we would prefer patches that improve Cogl to avoid this if possible - we are providing a simple mechanism that will at least give developers a fighting chance if they find it necissary. Note: we aren't helping developers change OpenGL state to modify the behaviour of Cogl drawing functions - it's unlikley that can ever be reliably supported - but if they are trying to do something like: - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. - continue using Cogl to draw They should surround their blocks of raw OpenGL with cogl_begin_gl() and cogl_end_gl(): cogl_begin_gl (); - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. cogl_end_gl (); - continue using Cogl to draw Again; we aren't supporting code like this: - setup some OpenGL state. - use Cogl to draw - reset modified OpenGL state. When the internals of Cogl evolves, this is very liable to break. cogl_begin_gl() will flush all internally batched Cogl primitives, and emit all internal Cogl state to OpenGL as if it were going to draw something itself. The result is that the OpenGL modelview matrix will be setup; the state corresponding to the current source material will be setup and other world state such as backface culling, depth and fogging enabledness will be also be sent to OpenGL. Note: no special material state is flushed, so if developers want Cogl to setup a simplified material state it is the their responsibility to set a simple source material before calling cogl_begin_gl. E.g. by calling cogl_set_source_color4ub(). Note: It is the developers responsibility to restore any OpenGL state that they modify to how it was after calling cogl_begin_gl() if they don't do this then the result of further Cogl calls is undefined.
2009-06-29 21:32:05 +00:00
*/
cogl-shader: Prepend boilerplate for portable shaders We now prepend a set of defines to any given GLSL shader so that we can define builtin uniforms/attributes within the "cogl" namespace that we can use to provide compatibility across a range of the earlier versions of GLSL. This updates test-cogl-shader-glsl.c and test-shader.c so they no longer needs to special case GLES vs GL when splicing together its shaders as well as the blur, colorize and desaturate effects. To get a feel for the new, portable uniform/attribute names here are the defines for OpenGL vertex shaders: #define cogl_position_in gl_Vertex #define cogl_color_in gl_Color #define cogl_tex_coord_in gl_MultiTexCoord0 #define cogl_tex_coord0_in gl_MultiTexCoord0 #define cogl_tex_coord1_in gl_MultiTexCoord1 #define cogl_tex_coord2_in gl_MultiTexCoord2 #define cogl_tex_coord3_in gl_MultiTexCoord3 #define cogl_tex_coord4_in gl_MultiTexCoord4 #define cogl_tex_coord5_in gl_MultiTexCoord5 #define cogl_tex_coord6_in gl_MultiTexCoord6 #define cogl_tex_coord7_in gl_MultiTexCoord7 #define cogl_normal_in gl_Normal #define cogl_position_out gl_Position #define cogl_point_size_out gl_PointSize #define cogl_color_out gl_FrontColor #define cogl_tex_coord_out gl_TexCoord #define cogl_modelview_matrix gl_ModelViewMatrix #define cogl_modelview_projection_matrix gl_ModelViewProjectionMatrix #define cogl_projection_matrix gl_ProjectionMatrix #define cogl_texture_matrix gl_TextureMatrix And for fragment shaders we have: #define cogl_color_in gl_Color #define cogl_tex_coord_in gl_TexCoord #define cogl_color_out gl_FragColor #define cogl_depth_out gl_FragDepth #define cogl_front_facing gl_FrontFacing
2010-07-23 16:46:41 +00:00
pipeline = cogl_get_source ();
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
_cogl_pipeline_flush_gl_state (ctx,
pipeline,
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 15:59:48 +00:00
cogl_get_draw_framebuffer (),
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
FALSE,
FALSE);
[cogl] Improve ability to break out into raw OpenGL via begin/end mechanism Although we wouldn't recommend developers try and interleve OpenGL drawing with Cogl drawing - we would prefer patches that improve Cogl to avoid this if possible - we are providing a simple mechanism that will at least give developers a fighting chance if they find it necissary. Note: we aren't helping developers change OpenGL state to modify the behaviour of Cogl drawing functions - it's unlikley that can ever be reliably supported - but if they are trying to do something like: - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. - continue using Cogl to draw They should surround their blocks of raw OpenGL with cogl_begin_gl() and cogl_end_gl(): cogl_begin_gl (); - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. cogl_end_gl (); - continue using Cogl to draw Again; we aren't supporting code like this: - setup some OpenGL state. - use Cogl to draw - reset modified OpenGL state. When the internals of Cogl evolves, this is very liable to break. cogl_begin_gl() will flush all internally batched Cogl primitives, and emit all internal Cogl state to OpenGL as if it were going to draw something itself. The result is that the OpenGL modelview matrix will be setup; the state corresponding to the current source material will be setup and other world state such as backface culling, depth and fogging enabledness will be also be sent to OpenGL. Note: no special material state is flushed, so if developers want Cogl to setup a simplified material state it is the their responsibility to set a simple source material before calling cogl_begin_gl. E.g. by calling cogl_set_source_color4ub(). Note: It is the developers responsibility to restore any OpenGL state that they modify to how it was after calling cogl_begin_gl() if they don't do this then the result of further Cogl calls is undefined.
2009-06-29 21:32:05 +00:00
/* Disable any cached vertex arrays */
_cogl_gl_disable_all_attributes (ctx);
[cogl] Improve ability to break out into raw OpenGL via begin/end mechanism Although we wouldn't recommend developers try and interleve OpenGL drawing with Cogl drawing - we would prefer patches that improve Cogl to avoid this if possible - we are providing a simple mechanism that will at least give developers a fighting chance if they find it necissary. Note: we aren't helping developers change OpenGL state to modify the behaviour of Cogl drawing functions - it's unlikley that can ever be reliably supported - but if they are trying to do something like: - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. - continue using Cogl to draw They should surround their blocks of raw OpenGL with cogl_begin_gl() and cogl_end_gl(): cogl_begin_gl (); - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. cogl_end_gl (); - continue using Cogl to draw Again; we aren't supporting code like this: - setup some OpenGL state. - use Cogl to draw - reset modified OpenGL state. When the internals of Cogl evolves, this is very liable to break. cogl_begin_gl() will flush all internally batched Cogl primitives, and emit all internal Cogl state to OpenGL as if it were going to draw something itself. The result is that the OpenGL modelview matrix will be setup; the state corresponding to the current source material will be setup and other world state such as backface culling, depth and fogging enabledness will be also be sent to OpenGL. Note: no special material state is flushed, so if developers want Cogl to setup a simplified material state it is the their responsibility to set a simple source material before calling cogl_begin_gl. E.g. by calling cogl_set_source_color4ub(). Note: It is the developers responsibility to restore any OpenGL state that they modify to how it was after calling cogl_begin_gl() if they don't do this then the result of further Cogl calls is undefined.
2009-06-29 21:32:05 +00:00
}
void
cogl_end_gl (void)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (!ctx->in_begin_gl_block)
{
static CoglBool shown = FALSE;
[cogl] Improve ability to break out into raw OpenGL via begin/end mechanism Although we wouldn't recommend developers try and interleve OpenGL drawing with Cogl drawing - we would prefer patches that improve Cogl to avoid this if possible - we are providing a simple mechanism that will at least give developers a fighting chance if they find it necissary. Note: we aren't helping developers change OpenGL state to modify the behaviour of Cogl drawing functions - it's unlikley that can ever be reliably supported - but if they are trying to do something like: - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. - continue using Cogl to draw They should surround their blocks of raw OpenGL with cogl_begin_gl() and cogl_end_gl(): cogl_begin_gl (); - setup some OpenGL state. - draw using OpenGL (e.g. glDrawArrays() ) - reset modified OpenGL state. cogl_end_gl (); - continue using Cogl to draw Again; we aren't supporting code like this: - setup some OpenGL state. - use Cogl to draw - reset modified OpenGL state. When the internals of Cogl evolves, this is very liable to break. cogl_begin_gl() will flush all internally batched Cogl primitives, and emit all internal Cogl state to OpenGL as if it were going to draw something itself. The result is that the OpenGL modelview matrix will be setup; the state corresponding to the current source material will be setup and other world state such as backface culling, depth and fogging enabledness will be also be sent to OpenGL. Note: no special material state is flushed, so if developers want Cogl to setup a simplified material state it is the their responsibility to set a simple source material before calling cogl_begin_gl. E.g. by calling cogl_set_source_color4ub(). Note: It is the developers responsibility to restore any OpenGL state that they modify to how it was after calling cogl_begin_gl() if they don't do this then the result of further Cogl calls is undefined.
2009-06-29 21:32:05 +00:00
if (!shown)
g_warning ("cogl_end_gl is being called before cogl_begin_gl");
shown = TRUE;
return;
}
ctx->in_begin_gl_block = FALSE;
}
void
cogl_push_matrix (void)
{
cogl_framebuffer_push_matrix (cogl_get_draw_framebuffer ());
}
void
cogl_pop_matrix (void)
{
cogl_framebuffer_pop_matrix (cogl_get_draw_framebuffer ());
}
void
cogl_scale (float x, float y, float z)
{
cogl_framebuffer_scale (cogl_get_draw_framebuffer (), x, y, z);
}
void
cogl_translate (float x, float y, float z)
{
cogl_framebuffer_translate (cogl_get_draw_framebuffer (), x, y, z);
}
void
cogl_rotate (float angle, float x, float y, float z)
{
cogl_framebuffer_rotate (cogl_get_draw_framebuffer (), angle, x, y, z);
}
void
cogl_transform (const CoglMatrix *matrix)
{
cogl_framebuffer_transform (cogl_get_draw_framebuffer (), matrix);
}
void
cogl_perspective (float fov_y,
float aspect,
float z_near,
float z_far)
{
cogl_framebuffer_perspective (cogl_get_draw_framebuffer (),
fov_y, aspect, z_near, z_far);
}
void
cogl_frustum (float left,
float right,
float bottom,
float top,
float z_near,
float z_far)
{
cogl_framebuffer_frustum (cogl_get_draw_framebuffer (),
left, right, bottom, top, z_near, z_far);
}
void
cogl_ortho (float left,
float right,
float bottom,
float top,
float near,
float far)
{
cogl_framebuffer_orthographic (cogl_get_draw_framebuffer (),
left, top, right, bottom, near, far);
}
void
cogl_get_modelview_matrix (CoglMatrix *matrix)
{
cogl_framebuffer_get_modelview_matrix (cogl_get_draw_framebuffer (), matrix);
}
void
cogl_set_modelview_matrix (CoglMatrix *matrix)
{
cogl_framebuffer_set_modelview_matrix (cogl_get_draw_framebuffer (), matrix);
}
void
cogl_get_projection_matrix (CoglMatrix *matrix)
{
cogl_framebuffer_get_projection_matrix (cogl_get_draw_framebuffer (), matrix);
}
void
cogl_set_projection_matrix (CoglMatrix *matrix)
{
cogl_framebuffer_set_projection_matrix (cogl_get_draw_framebuffer (), matrix);
}
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 18:28:27 +00:00
uint32_t
_cogl_driver_error_quark (void)
{
return g_quark_from_static_string ("cogl-driver-error-quark");
}
typedef struct _CoglSourceState
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
CoglPipeline *pipeline;
int push_count;
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 11:17:09 +00:00
/* If this is TRUE then the pipeline will be copied and the legacy
state will be applied whenever the pipeline is used. This is
necessary because some internal Cogl code expects to be able to
push a temporary pipeline to put GL into a known state. For that
to work it also needs to prevent applying the legacy state */
CoglBool enable_legacy;
} CoglSourceState;
static void
_push_source_real (CoglPipeline *pipeline, CoglBool enable_legacy)
{
CoglSourceState *top = g_slice_new (CoglSourceState);
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
top->pipeline = cogl_object_ref (pipeline);
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 11:17:09 +00:00
top->enable_legacy = enable_legacy;
top->push_count = 1;
ctx->source_stack = g_list_prepend (ctx->source_stack, top);
}
/* FIXME: This should take a context pointer for Cogl 2.0 Technically
* we could make it so we can retrieve a context reference from the
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* pipeline, but this would not by symmetric with cogl_pop_source. */
void
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
cogl_push_source (void *material_or_pipeline)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
CoglPipeline *pipeline = COGL_PIPELINE (material_or_pipeline);
_COGL_RETURN_IF_FAIL (cogl_is_pipeline (pipeline));
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 11:17:09 +00:00
_cogl_push_source (pipeline, TRUE);
}
/* This internal version of cogl_push_source is the same except it
never applies the legacy state. Some parts of Cogl use this
internally to set a temporary pipeline with a known state */
void
_cogl_push_source (CoglPipeline *pipeline, CoglBool enable_legacy)
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 11:17:09 +00:00
{
CoglSourceState *top;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
_COGL_RETURN_IF_FAIL (cogl_is_pipeline (pipeline));
if (ctx->source_stack)
{
top = ctx->source_stack->data;
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 11:17:09 +00:00
if (top->pipeline == pipeline && top->enable_legacy == enable_legacy)
{
top->push_count++;
return;
}
else
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 11:17:09 +00:00
_push_source_real (pipeline, enable_legacy);
}
else
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 11:17:09 +00:00
_push_source_real (pipeline, enable_legacy);
}
/* FIXME: This needs to take a context pointer for Cogl 2.0 */
void
cogl_pop_source (void)
{
CoglSourceState *top;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
_COGL_RETURN_IF_FAIL (ctx->source_stack);
top = ctx->source_stack->data;
top->push_count--;
if (top->push_count == 0)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
cogl_object_unref (top->pipeline);
g_slice_free (CoglSourceState, top);
ctx->source_stack = g_list_delete_link (ctx->source_stack,
ctx->source_stack);
}
}
/* FIXME: This needs to take a context pointer for Cogl 2.0 */
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
void *
cogl_get_source (void)
{
CoglSourceState *top;
_COGL_GET_CONTEXT (ctx, NULL);
_COGL_RETURN_VAL_IF_FAIL (ctx->source_stack, NULL);
top = ctx->source_stack->data;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
return top->pipeline;
}
CoglBool
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 11:17:09 +00:00
_cogl_get_enable_legacy_state (void)
{
CoglSourceState *top;
_COGL_GET_CONTEXT (ctx, FALSE);
_COGL_RETURN_VAL_IF_FAIL (ctx->source_stack, FALSE);
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 11:17:09 +00:00
top = ctx->source_stack->data;
return top->enable_legacy;
}
void
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
cogl_set_source (void *material_or_pipeline)
{
CoglSourceState *top;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
CoglPipeline *pipeline = COGL_PIPELINE (material_or_pipeline);
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
_COGL_RETURN_IF_FAIL (cogl_is_pipeline (pipeline));
_COGL_RETURN_IF_FAIL (ctx->source_stack);
top = ctx->source_stack->data;
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 11:17:09 +00:00
if (top->pipeline == pipeline && top->enable_legacy)
return;
if (top->push_count == 1)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
/* NB: top->pipeline may be only thing keeping pipeline
* alive currently so ref pipeline first... */
cogl_object_ref (pipeline);
cogl_object_unref (top->pipeline);
top->pipeline = pipeline;
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 11:17:09 +00:00
top->enable_legacy = TRUE;
}
else
{
top->push_count--;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
cogl_push_source (pipeline);
}
}
void
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 20:30:34 +00:00
cogl_set_source_texture (CoglTexture *texture)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
_COGL_RETURN_IF_FAIL (texture != NULL);
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 20:30:34 +00:00
cogl_pipeline_set_layer_texture (ctx->texture_pipeline, 0, texture);
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
cogl_set_source (ctx->texture_pipeline);
}
void
cogl_set_source_color4ub (uint8_t red,
uint8_t green,
uint8_t blue,
uint8_t alpha)
{
CoglColor c = { 0, };
cogl_color_init_from_4ub (&c, red, green, blue, alpha);
cogl_set_source_color (&c);
}
void
cogl_set_source_color4f (float red,
float green,
float blue,
float alpha)
{
CoglColor c = { 0, };
cogl_color_init_from_4f (&c, red, green, blue, alpha);
cogl_set_source_color (&c);
}
/* Scale from OpenGL normalized device coordinates (ranging from -1 to 1)
* to Cogl window/framebuffer coordinates (ranging from 0 to buffer-size) with
* (0,0) being top left. */
#define VIEWPORT_TRANSFORM_X(x, vp_origin_x, vp_width) \
( ( ((x) + 1.0) * ((vp_width) / 2.0) ) + (vp_origin_x) )
/* Note: for Y we first flip all coordinates around the X axis while in
* normalized device coodinates */
#define VIEWPORT_TRANSFORM_Y(y, vp_origin_y, vp_height) \
( ( ((-(y)) + 1.0) * ((vp_height) / 2.0) ) + (vp_origin_y) )
/* Transform a homogeneous vertex position from model space to Cogl
* window coordinates (with 0,0 being top left) */
void
_cogl_transform_point (const CoglMatrix *matrix_mv,
const CoglMatrix *matrix_p,
const float *viewport,
float *x,
float *y)
{
float z = 0;
float w = 1;
/* Apply the modelview matrix transform */
cogl_matrix_transform_point (matrix_mv, x, y, &z, &w);
/* Apply the projection matrix transform */
cogl_matrix_transform_point (matrix_p, x, y, &z, &w);
/* Perform perspective division */
*x /= w;
*y /= w;
/* Apply viewport transform */
*x = VIEWPORT_TRANSFORM_X (*x, viewport[0], viewport[2]);
*y = VIEWPORT_TRANSFORM_Y (*y, viewport[1], viewport[3]);
}
#undef VIEWPORT_TRANSFORM_X
#undef VIEWPORT_TRANSFORM_Y
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 18:28:27 +00:00
uint32_t
_cogl_system_error_quark (void)
{
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 18:28:27 +00:00
return g_quark_from_static_string ("cogl-system-error-quark");
}
void
_cogl_init (void)
{
static CoglBool initialized = FALSE;
if (initialized == FALSE)
{
#ifdef ENABLE_NLS
bindtextdomain (GETTEXT_PACKAGE, COGL_LOCALEDIR);
bind_textdomain_codeset (GETTEXT_PACKAGE, "UTF-8");
#endif
#if defined(COGL_HAS_GTYPE_SUPPORT) && !GLIB_CHECK_VERSION (2, 36, 0)
g_type_init ();
#endif
_cogl_config_read ();
_cogl_debug_check_environment ();
initialized = TRUE;
}
}
/*
* Returns the number of bytes-per-pixel of a given format. The bpp
* can be extracted from the least significant nibble of the pixel
* format (see CoglPixelFormat).
*
* The mapping is the following (see discussion on bug #660188):
*
* 0 = undefined
* 1, 8 = 1 bpp (e.g. A_8, G_8)
* 2 = 3 bpp, aligned (e.g. 888)
* 3 = 4 bpp, aligned (e.g. 8888)
* 4-6 = 2 bpp, not aligned (e.g. 565, 4444, 5551)
* 7 = undefined yuv
* 9 = 2 bpp, aligned
* 10 = undefined
* 11 = undefined
* 12 = 3 bpp, not aligned
* 13 = 4 bpp, not aligned (e.g. 2101010)
* 14-15 = undefined
*/
int
_cogl_pixel_format_get_bytes_per_pixel (CoglPixelFormat format)
{
int bpp_lut[] = { 0, 1, 3, 4,
2, 2, 2, 0,
1, 2, 0, 0,
3, 4, 0, 0 };
return bpp_lut [format & 0xf];
}
/* Note: this also refers to the mapping defined above for
* _cogl_pixel_format_get_bytes_per_pixel() */
CoglBool
_cogl_pixel_format_is_endian_dependant (CoglPixelFormat format)
{
int aligned_lut[] = { -1, 1, 1, 1,
0, 0, 0, -1,
1, 1, -1, -1,
0, 0, -1, -1};
int aligned = aligned_lut[format & 0xf];
_COGL_RETURN_VAL_IF_FAIL (aligned != -1, FALSE);
/* NB: currently checking whether the format components are aligned
* or not determines whether the format is endian dependent or not.
* In the future though we might consider adding formats with
* aligned components that are also endian independant. */
return aligned;
}