Pipewire 0.3.52 via commit a1f33a99 introduced a change that affects how
long pipewiresrc holds onto the pw_buffers it dequeued. Before that
change the pw_buffer was held until the end of the videoconvert element
at the beginning of the pipeline. After that change the pw_buffer was
held onto until the filesink at the end of the pipeline. This was
starving MetaScreenCastStreamSrc of pw_buffers to record new frames
into, resulting in the majority of frames being missed, especially in
situations in which the encoder was taking longer.
Pipewire 0.3.57 via commit 1ea1d525 will allow queuing the pw_buffer
early again via the `always-copy` option. This however is only a
workaround until a proper solution is found in either pipewire or
gstreamer that does not depend on copying the buffer contents and
instead queues the pw_buffer again after videoconvert as prior to
a1f33a99.
Since it is not clear yet when a proper solution will arrive, this makes
use of `always-copy` as a workaround for now and should be reverted once
it is no longer needed.
Related: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5585
Related: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2461
Related: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/283
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2436>
The object the SignalTracker belongs to is stored in a map managed by
the SignalManager which keeps a reference to that object. This map is
never destroyed nor is any entry ever removed. This leads to all objects
that ever had SignalTrackers used on them being kept alive even after
all references outside of the SignalTracker are long gone. This then
also extends to other objects which are leaked indirectly through
reference chains from these objects.
And if some of those objects are GObjects, this will prevent them from
being finalized, leaking further resources. A StWidget for example will
not release its shadow textures.
Fix this by destroying the SignalTracker and removing it from the
SignalManager once the last signal it was tracking has been untracked.
A WeakMap could have been used as well, but we need the Map to be
iterable in some of the following changes.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5807
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5796
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2466>
After the next commit, when some classes, such as PopupMenuManager try
to disconnect via a destroy handler, the SignalTracker might have
already been destroyed, so trying to get it from the SignalManager will
cause it to create a new one, which will then try to connect to the
destroy signal of the already destroyed object.
This could for example be triggered by changing backgrounds.
Fix this by not doing anything in disconnectObject if there is no
SignalTracker for that object.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2466>
This reverts commit 085102be74.
We need the SignalManager map top be iterable at shutdown for some of
the following changes. A WeakMap is not iterable. This revert changes it
back to a regular Map, which re-introduces the leaks caused by this.
Those will be fixed differently by the two followup commits.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2466>
Due to !2056 the monitor config is 2 instead of 4 on the desktop.
However, the constant `Meta.MonitorSwitchConfigType.UNKNOWN` is fixed to
4, and may cause the initial selection to be out of index thus fail to
display the switcher. This replaces the above constant to the actual
length of the switcher items.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2451>
If a device has multiple connections set up, then at most one of
those can be active at a time, which is why they are presented
as radio items.
In contrast, VPN connections are not mutually exclusive, each can
be turned on or off independently. Setting :radio-mode on them
currently means that VPN connections can be activated, but never
disabled.
So instead of abusing the :radio-mode property to give VPN items
the UI we want, use regular items that reflect the desired behavior
and explicitly set up the UI the way we want.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2426>
The object the SignalTracker belongs to is stored in a map managed by
the SignalManager which keeps a reference to that object. This map is
never destroyed nor is any entry ever removed. This leads to all objects
that ever had SignalTrackers used on them being kept alive even after
all references outside of the SignalTracker are long gone. This then
also extends to other objects which are leaked indirectly through
reference chains from these objects.
And if some of those objects are GObjects, this will prevent them from
being finalized, leaking further resources. A StWidget for example will
not release its shadow textures.
Fix this by using a WeakMap in SignalManager.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5807
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5796
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2450>
We got a shiny new screenshot UI last cycle, but only relatively
obscure ways of launching it: Keyboard shortcut or overview search.
The new quick settings provides us with a natural place to expose
the functionality more prominently, and at the same time reduce
the emptiness of the top row, in particular on systems without a
battery and when locked.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2439>
We will expose the screenshot UI from quick settings, including
on the lock screen. It would be odd to restrict keyboard shortcuts
more than the more accessible UI, so relax the modes for the
screenshot-ui and screen-screenshot shortcuts.
We still disable all screenshot shortcuts on the login screen, as
users don't have an obvious way to retrieve the screenshot files.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2439>
We currently don't take the session mode's `hasWindows` property
into account when deciding whether window screenshots should be
allowed. Right now that doesn't matter in practice, because all
the ways to bring up the screenshot UI are blocked in those modes
anyway. This is about to change though, so take the property into
account to prevent an information leak.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2439>
It is currently not possible to bring up the screenshot UI while
locked, but that is about to change.
We still don't want screencasts in that case, because they are
much easier to abuse for filling up someone else's disk.
That restriction is enforced by inhibiting remote access in the
backend, so trying to create a screencast session will fail anyway.
Still, not offering an action that is unavailable is better than
having it fail silently, so do exactly that.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2439>
When we aren't showing the power toggle (read: on systems without
a battery), all items in the top are located on one side. Address
this by "moving" the spacer between "Settings" and "Screen Lock"
in that case to balance items a bit better.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2439>
The quick settings code was first developed in an extension, which
meant it made sense to maintain compatibility with GNOME 42 and not
use the new :icon-name convenience property.
There is no good for sticking with that for GNOME 43 as well.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2439>
Since we put the actual slider into a bin to get a proper focus
indication, the slider isn't focused anymore and its accessible object
is therefore invisible to the screen reader.
Fix this by passing the slider's accessible object to the actor
that takes the focus.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2431>
NetworkManager can check if a network interface has "internet access" by
invoking a HTTP request.
The URI used for connectivity checking in NetworkManager can be configured
manually in NetworkManager.conf:
[connectivity]
uri=http://portal-check.exmaple.com/nm-check.txt
Portal Helper provides an argument to pass the URI that should be opened.
If this argument is empty it uses http://nmcheck.gnome.org as a fallback.
Pass the URI configured in NetworkManager to Portal Helper instead of
an empty string.
Fixes#1313
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2228>
This prevents _sync() being called after actor destruction (since actor
destruction became more reliable in mutter@3d94c7cc2) and so eliminates
this shutdown error:
```
(gnome-shell:35197): Gjs-CRITICAL **: 16:31:02.769: Object .Gjs_ui_calendar_Placeholder (0x559ed6e547e0), has been already disposed — impossible to set any property on it. This might be caused by the object having been destroyed from C code using something such as destroy(), dispose(), or remove() vfuncs.
== Stack trace for context 0x559ed6022310 ==
#0 559ed783c5a8 i resource:///org/gnome/shell/ui/calendar.js:1012 (31955be5fc90 @ 148)
#1 7ffef8f38230 b self-hosted:1178 (32af8f6b0c40 @ 454)
#2 559ed783c518 i resource:///org/gnome/shell/ui/popupMenu.js:806 (31955be18ce0 @ 52)
#3 559ed783c488 i resource:///org/gnome/shell/ui/popupMenu.js:954 (31955be190b0 @ 168)
#4 559ed783c3f8 i resource:///org/gnome/shell/ui/panelMenu.js:189 (31955be88150 @ 41)
#5 7ffef8f3de60 b self-hosted:1178 (32af8f6b0c40 @ 423)
```
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2429>
It is generally not possible to differentiate between systems
without bluetooth support, and systems where a bluetooth adapter
is powered down.
We work around that by tracking whether there are any set up devices,
and keep the bluetooth visible in that case, even when no adapter
is present.
However commit eeabdd150c moved updating the setting into the code
that handles adapter changes, which is exactly the place where we
carefully avoid changing the setting because it would be too
unreliable (devices may have already disappeared, or not yet
appeared).
Fix this by changing _setHadSetupDevices() to _syncHadSetupDevices()
and call that everywhere _sync() used to be called, *except* on
adapter changes.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5714
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2409>
We do set the full OSK as LTR since keymaps are defined in that
direction. Other actors inside the OSK might want differently so
move this piece of setup to init(), so child actors can set their
own without the OSK overwriting the value.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2278>
This should be handled in the capture phase so containers setting
up the drag gesture have an opportunity to handle events from children.
This also follows what the 3fg swipe gesture does.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2278>
Update the emoji panel so it can handle ratio changes dynamically,
and propagate the ratio from the Keyboard itself, so that the
emoji panel has a size that fits the OSK panel it was launched
from.
This is more important now with widely varying ratios, like
extended keyboards.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2278>
This keymap requires the corresponding input method for Hangul
input, and the hangul mode to be enabled. Look up for the right
state, and use a corresponding 'us' keymap for english input
otherwise, in order to follow hangul IM behavior.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2278>
Like OSK key buttons, we must avoid the default grabbing behavior
of StButton here. Hook to button-press-event to commit the selected
words, so we get a chance to prevent focus changes on the current
key focus.
Likewise, connect to ::touch-event to handle touch input.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2278>
This mode changes the current IBus engine to ibus-typing-booster
under the rug (i.e. no changes in keyboard status menu) for any
XKB engine selected.
In order to make it useful for the currently selected language,
the typing-booster dictionary is changed to the current XKB
layout language. And since the OSK has its own emoji panel,
typing-boosters own emoji completion is disabled.
These changes only apply as long as the OSK panel is shown,
reverting to the original engine and typing-booster configuration
after it is hidden. This in theory also caters for users that
do have ibus-typing-booster enabled as an input source.
The final effect is text prediction for the language that is
being typed, according to the OSK layout, given that
ibus-typing-booster and the relevant hunspell dictionaries are
used.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2278>
This action will replace CLUTTER_KEY_Backspace emission for
the OSK backspace key. Following the available mockups, implement
different modes of operation:
- Single tap deletes a single character
- Long tap starts deleting characters one by one
- Longer tap switches to word-by-word deletion
This is made possible via the input method surrounding text,
inspecting the string to look the previous char/word position
backwards, and relies on IM focus providing enough context.
Since deleting text and getting surrounding text are both
async operations, we make one happen after the other, until
the button is released.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2278>
Keep it consistent with the rest of the actions. For long press
handling (i.e. shift turning to caps lock), this also means the
release action should be cancelled after any long press, to prevent
both from taking effect at the same time.
Prior to this commit, we used to switch level (and hide the button
being pressed) on button press, which made its long press handler
never get a paired release and end up triggering caps lock.
Performing the action on release ensures the shift key button does
not fall into this situation, making this issue moot.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2278>
Have these defined in the JSON files themselves, instead of trying
to add them from JS while minding the differences in number of levels
and rows.
This means more redundant data in the JSON files, but simplifies
OSK layout creation significantly, and allows finer control over the
appearance without quirks.
As a result, importing data from CLDR is no longer as straightforward
as running an script. After initial import, manual editions will be
required to add missing keys, assign key widths, and so on.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2278>
These actions are defined in the JSON files themselves, allowing
us to migrate away from the sets of pre/post default keys, and fold
them into the JSON files for fuller control on layout and appearance.
As a first migration step, handle the relevant actions in the buttons
created from the JSON files, so we can port these.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2278>
Instead of having callers handle pressed+released, emit string
commits on a distinct signal that is emitted all at once during
release.
This also unifies the behavior of keys that have an extended keys
popup and not wrt press/release behavior and key repeat.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2278>
Add distinct properties for label/icon, and commit string/keyval
actions. This makes keys figure less things on their own, allows
disociating aspect and behavior (e.g. label '↲' and keyval 0x13),
and makes the fallbacks clearer (keyval and label resorting to
commit string).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2278>
We want the list to keep updating, so periodically request scans
from NetworkManager. The code follows what Settings does in its
wifi panel, including the used interval.
There's a cute little spinner in the menu header now, to indicate
an ongoing scan.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2408>
Unlike the old menu that restricted almost everything on the lock
screen, we went into the completely opposite direction with quick
settings and kept everything that does not launch windows available.
Extend that line to the network items, but still respect the
`network-control` permission.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2408>
When moving to quick settings, we will no longer have a single
parent we can hide instead.
This is only really needed for VPN - devices go away when networking
is disabled, connections (as in: configuration) do not - but it's
simpler to just handle this in the base class than adding a
_shouldBeVisible() method the VPN section can override.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2408>
If any device is in hotspot mode, use the corresponding item as
primary. Disable the (future QuickMenuToggle) menu in that case,
and turn off the hotspot when activated rather than toggling the
global wireless switch.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2408>
Wireless items represent a single adapter, but wireless connectivity
is controlled globally under NetworkManager.
So instead of delegating activation to items, bind the :checked
property to the global :wireless-enabled property and toggle it
on activate.
As any wireless devices will change their state to UNAVAILABLE
when wireless is disabled, don't remove corresponding items in
that case to keep the section visible.
We don't want to hide the button to turn Wi-Fi back on when toggled
off :-)
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2408>
Whether the device is used as a hotspot is currently only
used internally for the name and icon-name properties.
But hotspots need special treatment in the toggle as well,
so turn the method into a GObject property.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2408>
As the sections are about to turn into quick toggles, they need
to be able to perform an action on click.
Add an activate() method for that purpose, which either disconnects
all active items, or connects the primary item.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2408>
DeviceItems are sections, and therefore not actually activatable.
However when we port to quick settings, those toggles will need
to do *something*.
For that reason, provide an activate() implementation that
1. deactivates the device if currently connected
2. delegates the action to the most-recently used item,
the first visible item or the auto-connect item (in that
order)
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2408>
The primary indicator is a bit tricker than the VPN one: The source
of the binding can change depending on the connection, and we still
want to show it when there is a network connection we don't know
about (either because we don't handle the device type, or the
device isn't managed by NetworkManager).
Bindings still make the whole thing a lot nicer though.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2408>
This is the last property that will be needed by the future
betwork quick toggles.
It maps to the same item as :icon-name, except when more than one
item is active. In that case, we overrule the binding and return
a generic name and count (like "VPN (2)").
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2408>
Again no big surprise, a property that will soon correspond to the
quick toggle's icon.
It is more involved than the :checked property though, which is just
a simple boolean.
To keep it as simple as possible, we set up a binding group and use
that to bind the :icon-name property.
As state changes, we then update the group's source with the item
we deem to best represent the section as a whole at the given
moment.
That is (in that order):
- the first active item
- the most recently used item
- the top-most visible item
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2408>
Instead of subclassing PopupMenuSection, it is now a plain GObject
that has a `menu` JS property.
That brings it a tad bit closer to QuickMenuToggle, which is another
GObject with a `menu` property.
We are on the final stretch now. Over the next couple of commits,
we'll add some (fake) properties so we can hook everything up,
and then it's finally time for the big switch.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2408>
We treat wake up requests the same as user activity, as in general
the two behave the same: Turn on the screen and reset the idle watch
until the system becomes idle again.
The big exception is when the screen isn't locked yet. In that case
user activity should interrupt the automatic screen lock, but a
request to wake-up the screen (like showing a notification) should
not.
Address this by ignoring wake-up requests while the screen shield
isn't active, as we can expect the screen to still be turned on at
that point.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5719
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2413>
Now that console.debug() makes it easy to log message with DEBUG
priority, we can be a lot more generous with logging without
spamming logs (by default).
Those turned out useful in figuring out the issue in the next
commit, so let's keep them.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2413>
This is a region where, if hovered while dragging, immediately goes
to the previous or next page. This behavior was lost during the
transition to the new app grid layout manager.
Bring back the drag overshoot region.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2335>
This brings back the ability to drop an icon beyong the last page.
Because the acceptDrop() method does not have access to the target
drop actor, to avoid an extra pick or manually calculating it from
allocations, simply store it during DragMonitor.dragDrop(), and
use the target actor in acceptDrop().
This commit also removes the last usage of SidePages, so drop the
enum too.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2335>
This simplified the _handleDragOvershoot() callback quite a lot.
Instead of transforming point positions and checking them against
grid coordinates, merely check if the drop target is one of the
page indicators.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2335>
Make the next and previous page arrows be StButtons, with their
'icon-name' property matching the current StIcon icon name, and
use the 'clicked' signal to switch pages.
Remove the 'button-press' callback the scroll view, since the
buttons take over this functionality.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2335>
This was lost 2 commits ago, but now we reimplement this in a
different way. There is some jesting with allocations, since
we cannot use transformed positions while changing translation
of the icons. This new implementation works regardless of the
screen resolution.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2335>
This is a major departure to how page previews used to work. Add
a new layout manager that handles showing and hiding page previews
and navigation arrows. Move most of the code handling page previews
to this new layout manager.
The layout manager allocates at most 20% of the screen width for
the previews, and at least the width of the arrow.
The next and previous page peeking effect is temporarily lost with
this commit, but will be reintroduced in later commits.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2335>
AppDisplay will require an extra padding applied on top of CSS
page padding. This is specific to AppDisplay and FolderView.
Add a new AppGrid class which subclasses IconGrid and adds this
extra padding - here called 'indicators-padding'.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2335>
The API surface of IconGrid was originally meant to be only
setGridModes(), however findBestModeForSize() ended up being
called by AppDisplay code. Now that FolderGrid sets the modes
correctly, we don't need to skip calling findBestModeForSize()
anymore.
Always call findBestModeForSize() during IconGrid's allocation.
Add an underscore to findBestModeForSize() since it's now back
to be a private method of IconGrid.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2335>
Back in the day, adaptToSize() contained mad maths to figure out
icon sizes. Over time, its scope was reduced, to the point where
we are today where it mostly just redoes some quick maths to
predict the grid size based on the CSS box model.
Remove adaptToSize() from BaseAppView and child classes. It still
is an internal detail of the IconGrid class, but it's not exposed
as a "public" method anymore.
This removal is not perfect, as it doesn't move or compensate for
any of page indicators and arrows code. This will be done in follow
up commits introducing a new layout manager for that.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2335>
Another step in dismantling AppDisplay before reintroducing some
of the elements there. Instead of adding a certain amount of
padding, capped at 200px, always give the grid all available size.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2335>
The stack widget once was a ShellStack and had a prominent role
in layouting AppDisplay, but after a series of reworks it's now
effectively unused, and can be safely removed.
Remove the '_stack' widget from AppDisplay.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2335>
We'll have to dismantle parts of AppDisplay and BaseAppView in
order to introduce navigation arrows in a way that won't drive
people insane.
Start this dismantling by removing the fade effect. It looks odd
for now, since we still set padding to the app grid, but that
will change soon too.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2335>
Space will be less of a concern when each sections becomes its own
menu, but it's still not infinite. To address this, enable MRU
tracking and limit the list to the eight most recently used items.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
Devices do not have an associated timestamp, but as we can now
track the MRU order of their connections, it makes sense to consider
the time of the most recent succesful connection the timestamp
of the device item.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
We always display items sorted by name, but there are cases where a
second order by recency is interesting. Add an option to ItemSorter
to keep such a list and allow accessing it with another generator
function.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
Connections have a timestamp property, which records the last time
it was succesfully activated. This is useful information to us, as
more recently used connections are likely more relevant than ones
that haven't been used for a long time (or not at all).
To make use of it in the future, expose that timestamp as a property.
Only connections support it, but we will soon provide a reasonable
value for devices as well, so add the property to the base class.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
Eventually each section will turn into its own menu, which should
include a single settings item.
This also removes the odd duplication of items, now that we avoid
using submenus where possible.
In general this is straight-forward, except for modems: Some
models are now supported by a dedicated wwan panel, while others
still use the generic network one.
Address this by adding items for either panel, but only show one
at a time. The new panel is used if *any* modem is supported,
only when all modems require it, the legacy panel is used.
Hopefully that shouldn't be an issue for many users, as using many
different modems with different capabilities should be fairly rare
(except for Aleksander Morgado, but I think he can handle it)
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
We currently stopped using submenus altogether, but that only works
- if there is a single connection that represents
the device as a whole
- if there is just one device, so it is unambiguous
what device items belong to
To implement that behavior, add a 'single-device-mode' property that
NMDeviceSection can set on its items, and have items update their
'use-submenu' property based on that.
For wireless devices it's a straight mapping, as its items represent
wireless networks that can appear and disappear by just walking around
(multiple wifi adapters also sounds rather fringey).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
Now that device sections manage a list of items, and the VPN section
manages a list of items, it's time to split out a shared base.
The class will get more involved over time, and eventually become
the base of all network quick items.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
We got the indicator out of the business of tracking connections,
now it's time to do the same for devices.
Let sections track device additions and removals, and create device
items for them as it sees fit.
It also allows the sections to handle the ::activation-failed signal
by themselves, instead of passing it on from device items.
With this, the indicator is now solely responsible for global state:
Manage the top bar indicators, notify on connection failures, and run
the portal helper when NetworkManager detects a captive portal.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
As mentioned when doing the same for VPN connections, it is currently
the indicator itself that keeps track of added and removed connections.
It then has to figure out the correct section, and iterate through all
its device items so each item can check whether the connection
corresponds to its device.
Stop that mess, and let each device item keep its connections updated
by itself. That is actually way easier, as NM.Device already exposes
available connections through a property, so we can get rid of all
the checkConnection() shenanigans.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
We currently wait until we got a connection to NetworkManager.
That's possible because the old PanelMenu indicator API takes
a menu, so it is possible to add or remove items dynamically
later.
That won't be the case with quick settings, where `quickSettingsItems`
is a plain array that is only read once when adding the indicator.
Prepare for that by moving section initialization into the constructor.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
Now that wi-fi devices will be handled by a separate menu toggle
instead of as part of a combined system menu, there is no longer
a need of delegating network selection to a separate dialog.
To keep the menu from growing too much, the (sorted) list of
displayed networks is kept at a limit of eight. There is always
Settings for a complete list…
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
In terms of UI, this means that in the common case where we have
a single (or no) connection, the device can be represented as a
single menu item rather than a submenu.
But more importantly, all our menu items inherit from the same
GObject class now, so we can use bindings where appropriate.
This will later extend to quick toggles as well.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
The class implements a menu item that contains a section which
can be collapsed into a submenu.
It is very common for network devices to only have one associated
connection, so hiding away a single item in a submenu is fairly
inconvenient.
This class will address this, by only using a submenu when it is
actually needed.
Although the main issue it addresses is that menus (including
sections) aren't GObjects. This gives us a GObject that can
be added to a menu, and that can itself contain other menu
items.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
The class only provides the GObject properties that are currently
defined by NMConnectionItem, plus a way to set the active connection
that should be used for the item's :is-active state.
Its sole purpose is to provide a shared base for both device- and
connection items, and to have that base be a GObject so we can
start linking properties via bindings rather than manual fiddling.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
Let's keep things simple and use the same appearance regardless
of the number of configured VPNs. Also unlike for device items,
every connection item in the VPN section is a toplevel item, so
there isn't a real need for different presentations.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
The NMConnectionSection class is used - surprise - to manage a
list of related connections. And while the presentation of VPN
items is slightly different from connections associated with
devices (switches vs. ornaments), it makes perfect sense for
the VPN section to share the nitty-gritty with the base class.
But…
Right now it is perfectly fine for NMConnectionSection to be
used both as a child element in a device section, and as toplevel
item of the VPN section. Any nesting of sections is entirely
transparent to the user, and all connection sections appear as
submenu items in the toplevel menu.
That won't work for quick settings.
There's no PopoverMenuSection that allows invisible grouping, so
adding items dynamically would either need to happen at the end,
or require some tricky cross-component code to impose a particular
order.
And last but not least, quick toggles are very much unsuited for
a potentially large number of items. The whole point is to provide
quick direct access to system features, not to compete with menus
over the number of items they can hold.
That is, we need to get from the current state where each device
appears as a toplevel item, to a state where we have one quick
toggle for each device type plus one for VPN.
The decoupled VPN section still behaves largely as it did as a
subclass, with the notable difference that it no longer uses
a submenu item, so all VPN connections now appear at the toplevel.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
Right now the indicator itself tracks all devices and connections,
creates and destroys the corresponding menu items, matches them
to a section and updates the connection/device arrays that are
attached to the section.
Sounds messy?
It is slightly less effective to connect multiple handlers to the
same NMClient, but let's assume that devices and connections aren't
added/removed at 60 frames/s, and we can add some readabilty by
moving the code into different classes that only have to care about
the bits that are relevant to them.
The VPN section is a good starting point, because its handling is
already quite different from device sections.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
At its core, it's the sort order tracking from NMConnectionItem
with a bit of sugar on top to provide access to the ordered items
and the ability to provide a custom sort function.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
You could argue that the item name is closer to what is displayed
to the user, but it doesn't really matter: Connection items will
always use the connection ID when there is more than one, which
is the only case where sorting matters.
However sorting by items will allow us to generalize the code, and
use it for items that do not represent a connection.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
When not in radio-mode - that is, when the connection is the only
connection for its device - we want the item to represent the
device as a whole.
Achieve this with a small ConnectionItem subclass that adds a
:device-name property for that purpose.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
When not in radio-mode - that is, in the single-connection
case - the item currently uses a plain 'Connect' label.
That is OK while the item is inside a submenu that describes
the device, but we will soon stop using a submenu when a single
item can describe the device as a whole.
Prepare for that by adding an icon that is shown when in non-radio
mode, and include the device name in the label in that case.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
Newer versions of IBus (> 1.5.26) have the IBUS_CAP_OSK capability
which can be used to hint the active IM about an OSK driving input as
opposed to a physical keyboard. This may be used by IMs to tweak their
behavior to suit OSKs better.
Add the GNOME Shell side handling for this capability, and toggle it
on whenever the OSK is visible.
Since this is a far too new enum value and we don't want such new
IBus dependency, this change plays fast and loose with JS guarantees,
since a logical OR with an undefined value results in the other operand
unmodified it will work for older versions where the capability does not
exist and thus we want nothing extra enabled.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2415>
We are calling _loginScreenSessionActivated() even in cases where this is
not required. For example, there are cases where the Active property is
already `true` and properties like `IdleHint`, `IdleSinceHint` and
`IdleSinceHintMonotonic` change. In this cases _loginScreenSessionActivated()
is called and will reset the authPrompt when not necessary.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2411>
We do want to update the best AP on strength change, in case we
can switch to a better one.
But even if we can't and the AP is unchanged, the icon should
be updated to reflect the change.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2414>
Right now DeviceCategory is a small section wrapper that shows
a summary instead of its content if it contains too many items.
It will eventually eventually turn into the base class for
network device quick toggles. Who would have thought that
when it was added for the "there's a computer with 32 ethernet
cards" fringe case?!
For now, give it a more appropriate name and use device types
instead of our made-up categories, now that the two map neatly.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
It's odd to swap out a switch with a status label, and the
information isn't that helpful to begin with: It's either
transient (connecting, deactivating, ...), or too little to
be meaningful (unknown, failed, ...).
We're also perfectly happy to not show it in "label mode"
(i.e. when there's just one VPN).
Just get rid of it.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
Stop providing detailed state descriptions, instead use a name
that best represents the device at the moment (like a wifi SSID,
the carrier name, or the device name as determined by network manager).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
The _devices property is another case of overloading the
"device" term.
Fun fact:
this._devices[device._delegate.category].devices
uses three different meanings of "device" (section, NM.Device, item).
The devices array in sections won't be around for much longer,
but the property that tracks the sections is worth renaming.
While at it, use a map instead of a plain object, which has a
guaranteed order when iterating (which will come in handy later).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
Different access points can belong to the same wireless network. As
NetworkManager doesn't handle this for us, we need to track networks
ourselves, and we currently do this using ad-hoc object literals and
monkey-patching.
Clean this up by factoring out a proper WirelessNetwork class, and
associate them to items with a map.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
Interpreting the different flags is better left to the domain
experts at NetworkManager. It is also much more likely that
NM's own functions will handle newly added flags than our own
code.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
There is a straight mapping between running/enabled and visibility,
so bind them instead of using a signal handler.
_syncConnectivity() is called both from _syncMainConnection() and
on connectivity changes, which should cover any running/enabled
changes.
That just leaves updating the icon on state changes.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
We would want the signals to be disconnected if we ever happened to
destroy the indicator. Even if we don't, connectObject() is simply
nicer when connecting half a dozen handlers at once.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
There is only one case where we show a notification: When activating
a connection failed.
There is therefore no reason for a generic wrapper around the
notification API. Likewise, tracking the source is a bit pointless,
given that the notification is transient. In fact, as we destroy
an existing notification *before* checking for the source, any
previous source will be gone by that point.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
The function is a handler for the `notify::state` handler, so
the state and reason parameters used in the checks are always
undefined.
In addition, `DEACTIVATED` is not (just) a failure state. We
clearly don't want to complain about a failed connection when
the change happened on request of the user.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
We never used it, so after more than ten years, it seems safe to
assume that we never will.
Plus different items pass different types, which makes it pretty
much impossible to use, even if we wanted to (which apparently
we don't 🤷️)
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
When deciding on whether to show the 'no-route' icon, we check
for the client's connectivity *and* whether the devices's active
connection is used as primary connection.
This is currently masked by the indicator updating the icon on
connection changes anyway, but items should still notify the
change themselves.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
The wireless device item tracks the active access point in order
to update its icon on signal strength changes.
However we currently don't synchronize the initial state, so we
miss strength changes until the first access-point change.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
Otherwise any unrelated errors in that function are hidden,
because exceptions in async functions are turned into promise
rejections (and JS cannot know that we won't handle it at a later
point).
It wouldn't happen to me of course 😉
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
I wasn't genuiously going to touch those lines, but I ran into
a limitation of the run-eslint script:
It currently bases changed lines on a diff between HEAD and main
instead of the commit-by-commit log.
The two can vary quite a bit when shuffling code around, and those
are the lines the tool kept complaining about.
I'll look into improving the script, but for now it's quicker to
just shut it up by fixing up the complaints.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
There isn't always a serviceName when we set a message. Furthermore we
are passing the serviceName only to decide if we want to wiggle or not.
Pass the wiggle parameters instead. If they are missing, we don't want
to wiggle.
This fixes the following error:
JS ERROR: Exception in callback for signal: login-format-changed: Error: Wrong type number; string expected
setMessage@resource:///org/gnome/shell/gdm/authPrompt.js:542:13
_showRealmLoginHint@resource:///org/gnome/shell/gdm/loginDialog.js:931:26
_emit@resource:///org/gnome/gjs/modules/core/_signals.js:114:47
_updateLoginFormat@resource:///org/gnome/shell/gdm/realmd.js:85:18
_reloadRealm@resource:///org/gnome/shell/gdm/realmd.js:57:14
_onRealmLoaded@resource:///org/gnome/shell/gdm/realmd.js:64:14
_makeProxyWrapper/</<@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:245:34
Fallout from 526f0711f1.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5547
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2404>
Now that the old system menu has been ported over, we can move
the power toggle to its intended place. The main difference to
the stand-alone toggle is that the button now uses its natural
size rather than the fixed size of regular quick items.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2393>
This port is a bit messier than the previous ones, because the
existing menu section translates less directly to the new UI,
which uses a row of individual toggles for settings, lock and
shutdown.
In order to not complicate the grid layout further by supporting
rows with a different number of columns than the overall grid and
children at their natural size, create a custom, non-reactive
SystemItem item that spans an entire row, and contains the individual
toggles.
This works quite well, even with the shutdown item that uses a menu
for the various actions.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2393>
With menu support in place, this is now a straight-forward port:
Just add the existing profiles section to a QuickToggleMenu instead
of a submenu item.
The toggle itself now switches between 'balanced' and the last used
non-default profile.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2393>
Now that the QuickSettingsMenu supports child menus, it is time
to add menu support to quick toggles.
Do that by introducing a QuickSettingsItem parent class with a
construct-only :has-menu property, as that will allow including
menus in items that aren't following the standard icon+label
pattern of QuickToggle (yes, we'll have some of those).
A common parent class also allows us to control the type of
menu that is created. That's important, as we need another
custom menu type to
- constrain the menu's y position to place it underneath
the source actor
- use open/close animations taylored for this use case
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2393>
This is where it gets hairy.
Some quick settings items will have an associated menu. When
opened, the main menu should grow to make room for the child
menu, as it would do if it contained the child.
At the same time, the child menu will attach to its parent, and
block all input there while it is open.
Menu-modal menus so to speak.
Implement this as follows:
- change the QuickSettingsMenu actor to a stack that holds
- the boxpointer (a.k.a. the actual menu)
- an overlay actor to hold child menus
- use constraints to bind the overlay's position and width
to the boxpointer; the y position is offset to align the
overlay with the grid inside the actual menu
- add a placeholder actor to the main grid, whose height is
bound to the overlay height; using a "clone" instead of
the actual overlay means that layout changes are not triggered
from outside the grid hierarchy, which would be prone to
allocation warnings
- update the layout manager to not allocate the placeholder as
a regular grid child, but instead include its height in the
space underneath the row with an open menu
- apply a dim effect to the boxpointer when a child menu is
open, to indicate that input is blocked
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2393>
WorkspaceBackground's allocate is a hot function called every frame
during overview animations. Port it to C.
While we're at it, cache the work area and the monitor geometry, which
do not need to be re-fetched on every allocation.
This reduces the average WorkspaceBackground allocation time from
0.134 ms to 0.017 ms. With four workspaces, scrolling the overview sees
an average WorkspacesView allocation time improvement from
1.104 ms to 0.678 ms.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2394>
The aggregate menu with its submenus isn't well-suited for simple
on-off actions, so we didn't expose the global color-scheme support
that was introduced last cycle.
Quick settings on the other hand are a natural fit for actions like
this, so add a corresponding toggle.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
The power indicator should not be a regular quick toggle, but
instead be part of a "system area" row at the top of the menu.
But as in the end it is still a simple button, we can do the
port to quick settings now, and move it later when the system
row is implemented.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
For now, this is another simple toggle. The icon, state and
visibility reflect what the old menu did, and the top bar
icon is still only shown when devices are currently connected.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
Another simple toggle. Unlike the old menu, it is always shown
if airplane mode is supported, not just while airplane mode is
active.
We still only show the top bar icon while airplane mode is on.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
Night-light is now a simple, always visible toggle that directly
controls the underlying setting. No change to the top bar icon,
which is still only shown while night-light is active (read: at night).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
Like the aggregate menu currently, the quick settings menu will
eventually contain some items that should dismiss the menu. And
as those items may appear in child menus or otherwise be nested,
a public method on a global object is more convenient than handing
the main menu down the hierarchy.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
The new indicator will eventually expose all the system status
items that are currently provided by the aggregate menu, but in
a more accessible form than the current submenu-heavy menu.
Right now this just adds the new empty indicator to the top bar,
alongside the existing aggregate menu.
We can then move items over one-by-one.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
The quick settings menu is a popover that arranges items in a
reflowing, homogeneous grid. Grid children may span multiple
columns, but not rows.
For now the QuickSettingsMenu that contains the grid is just a
convenience wrapper around the layout manager that does the heavy
lifting. The two will become more intertwined when we add support
for menu toggles though, so the custom menu type is unfortunately
needed.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
Multiple booleans - both in arguments and return values - are almost
always problematic API, because people have to memorize (or more likely
look up) the meaning of each position.
Instead, return a JS object so each value has a name attached to it.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2370>
After porting the more complex cases - in particular those that
affect a module's API - we are left with straight-forward D-Bus
method calls that can be moved to promise-based wrappers in one
go.
For consistency, this also switches from Remote to Async where
the call result is ignored.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2344>
The LoginManager abstraction is still mostly callback-based, not
least because the methods are thin wrappers around logind D-Bus
calls.
However as gjs' dbus wrapper now generates promised-based wrappers
as well, we can implement a proper async API just as naturally.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2344>
Thanks to recent gjs changes - namely the ability to promisify
interface prototypes and promise-based D-Bus wrappers - we can
modernize the ContentTypeDiscoverer API to use an async function
instead of a callback.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2344>
Our search provider API has to be asynchronous to support remote
providers. It doesn't have to be based on callbacks though, now
that async functions provide a nicer alternative.
That is particularly true after gjs's D-Bus wrapper started to
generate promise-based method variants.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2344>
Provider loading has been synchronous since 2013, so we can
just as well return the results directly instead of passing
them to a callback.
Even if we returned to asynchronous loading in the future,
we wouldn't want to use a callback, but make the function
itself async.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2344>
There are a couple of places left where we still use the old
indentation style, update them before making code changes.
After that, there are only a couple of non-type-safe comparisons
left of legacy style, so change those as well while we're at it.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2344>
The latest mockups move the screen sharing indicator into a
separate control, similar to the existing indicator for built-in
screen recordings.
As this removes the submenu and only keeps the top bar icon (for
external screen recordings), this will smooth the transition to
quick settings.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
Location services aren't expected to change frequently: They are
either disabled globally, or permissions are granted on a per-app
basis.
This is less of a concern while the setting is exposed in a small
submenu, but as we moving to quick settings, it does not deserve
the prominence of a quick toggle. Just the top bar icon and Settings'
privacy panel should be enough.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
Other than connecting stream when necessary, the volume menu
only forwards slider events to the indicator, and method calls
from the indicator to the appropriate slider.
Just cut our the middle-man and let the indicator handle the
slider items directly.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
On error, we currently print a warning and bail out early. That
means we don't hide the slider, despite it being non-functional
without the proxy.
Fix this by making sure _sync() is called in any case. While at
it, use an appropriate log level for the warning message.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
Properties are null while a proxy has no owner. Javascript helpfully
coerces that into `Number(null)` (a.k.a. 0), so we end up with a
broken slider.
Explicitly check that the value is an integer before doing the
comparison to catch that case.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
The new class abstracts away the nitty-gritty of bluetooth- and
airplane-mode handling, and exposes just what the UI needs.
This will become more important with quick settings, where there's
a stronger separation between top bar icon and quick toggle.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
There's no good reason for waiting for the proxy to be initialized
to connect signals. In fact, connecting the signal beforehand
ensures that the handler is in place when the proxy fetches the
properties, so we don't have to call the handler explicitly.
That in turn allows us to rely on the signal parameters to only process
changed properties.
To achieve that, construct the proxy manually, and then initialize
it asynchronously in a Promise.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
There's no good reason for waiting for the proxy to be initialized
to connect signals. In fact, connecting the signal beforehand
ensures that the handler is in place when the proxy fetches the
properties, so we don't have to call the handler explicitly.
That in turn will allow us in a follow-up to rely on the signal
parameters to only process changed properties.
To achieve that, construct the proxy manually, and then initialize
it asynchronously in a Promise.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
Don't try to initialize and then enable an extension if it is not supported
in the current mode. Otherwise the extension will not be initialized, and the
initial ERROR state is not cleared. Once it is in ERROR state we can't enable
it anymore when we switch mode. Instead, leave the extension in INITIALIZED
state, so that it will be initialized when appropriate. This happens for
extensions that support the unlock-dialog mode but not the user mode.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2378>
Screenshots use `%Y-%m-%d %H-%M-%S` for the timestamp, which has the
advantage of allowing proper lexicographical sorting.
The screencast file name pattern, on the other hand, uses
locale-dependent expansions, which break sorting based on file name, and
introduces the chance of potentially invalid characters on different
file systems.
Fixes: #5115
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2300>
`ShouldShowAirplaneMode` only considers whether airplane mode
should be shown for the form factor, not whether there are
any actual kill switches available.
That's tracked in a separate property, `HasAirplaneMode`.
Take that into account for our `:show-airplane-mode` property,
so that it reflects when airplane mode should and *can* be shown.
Right now we only show airplane mode when it is enabled (and
therefore available), but this will change in the future.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2385>
There's no good reason for waiting for the proxy to be initialized
to connect signals. In fact, connecting the signal beforehand
ensures that the handler is in place when the proxy fetches the
properties, so we don't have to call the handler explicitly.
That in turn will allow us in a follow-up to rely on the signal
parameters to only process changed properties.
To achieve that by constructing the proxy manually, and then
initialize it asynchronously in a Promise.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2385>
In case where there are multiple in- or output devices, pulseaudio
or pipewire can pick the "wrong" one by default.
Allow users to change devices without opening sound settings by
adding a submenu to the sliders when there is more than one device.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2380>
Since IBus does not provide this information right away, we
so far cannot do much about providing a truthful anchor position
for the preedit text. But with the Mutter API in place it will
be up to this object to do so in the future.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2384>
This behavior dates back all the way to the original gnome-shell
release, and it did make sense at the time:
- we were first to make notifications persistent instead of
closing them after a timeout; apps were therefore used to
treat notifications as fire-and-forget instead of closing
them when no longer relevant
- neither web notifications not portals did exist yet, so the
D-Bus API was only used directly, instead of as a backend
for other APIs; as a result, focusing the app was more likely
than not to put the source of the event that the user was
notified about into view
Nowadays both persistent notifications and web notifications
are wide-spread, so the original reasons no longer apply.
This change helps web notifications in particular, as it reduces
the differences between XDG and portal-based implementations.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2332>
GNOME Shell will only update extensions if the org.gnome.Extensions
app is present. This commit adds alternative support for
com.mattjakeman.ExtensionManager to the extension updating mechanism.
It enables updates to occur when extension-manager is the sole installed
tool on the system. When both applications are installed,
org.gnome.Extensions is preferred at all times.
Fixes#5564
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2358>
The logging function cannot be asynchronous, so move the override
into main.js where ExtensionUtils can be imported at the top level.
Importing ExtensionUtils in environment.js at the top level is not
possible because it would import Main prematurely.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2363>
ES modules do not allow exports to be overriden, in anticipation
of the ESM port add a `setCurrentExtension` utility which will
throw if used in the shell. This is tested using a conditional
import of Main.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2363>
We considered any ConnectFlag value major than SWAPPED as invalid, while
it's technically not fully true as we need to ensure that the passed
value is respecting the whole flags mask.
In fact, per se SWAPPED|AFTER (> SWAPPED) is a valid value (even if we
don't support the AFTER value).
But this makes the check more future-proof.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2366>
While untracking an object we used to compute it's proto for each signal
we were disconnecting from, while this is not needed when we're just
iterating over all the same owner signals, so let's add few more
functions to compute an object prototype, and repeat the disconnections
in the simplest way we can.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2366>
We used to create a temporary array of signal tracker keys and then to
iterate through them in order to untrack the objects, but the Map's can
be iterated directly so let's just use their native forEach.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2366>
Introduce a new class, EventEmitter, which implements signal
handling for pure JavaScript classes. EventEmitter still
utilizes GJS' addSignalMethods internally.
EventEmitter allows static typechecking to understand the
structure of event-emitting JS classes and makes creating
child classes simpler.
The name 'EventEmitter' mirrors a common name for this pattern
in Node and in JS libraries.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2043>
If we only raise screenshot UI to top, ibusCandidatePopup can still
cover screenshot UI because each time ibusCandidatePopup updates it's
visibility it will raise it to top and this also happens if we open
screenshot UI via keybinding. This commit fixes it by only raising it
above keyboardBox, because keyboardBox is above all entries in modal
dialogs.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2331>
ibusCandidatePopup actually works as a top chrome because it always
raises itself above top_window_group when updating visibility, so just
initing it as a top chrome instead of initing it below top_window_group.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2331>
The overviewGroup's size is currently determined by the coverPane
actor. That actor is only shown during transitions, so we rely on
ClutterFixedLayout including hidden children in its size request.
That odd behavior is about to change, so we need to make sure the
overview still requests the correct size.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2351>
When a window with a modal dialog gets minimized and at the same time
the dialog is closed, the WindowDimmer undim animation starts and gets
cancelled when the minimize animation is done, because that unmaps the
window actor.
In this case we want ensure the dimming effect still goes into a
proper state instead of being stuck mid-animation, so listen to
onStopped instead of onComplete for syncing state of the window dimmer.
While at it, clean things up a little and move the check for the
attach-modal-dialogs pref inside the _syncEnabled() function.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5581
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2349>
Right now, we don't pay much attention to visibility hints from IBus
about the candidates list for the OSK suggestions bar. Since some
IMs rely on this visibility being honored, do that.
To fix this, the visibility hints for the lookup table are now
propagated to the keyboard, so the Suggestions actor hides its
internal candidate buttons. Since the Suggestions actor gets its
minimum height from CSS, this does not result in OSK size jumps.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5601
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2347>
There is no hint about the currently selected language, but this exists
in the mockups. Add a dot ornament on the language that is currently
selected at the time of showing the OSK languages popup.
Since this popup is created from scratch every time it is shown, and
the popup is torn down with the OSK during replacement. This also
works for further times the languages popup is shown.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5598
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2346>
When calculating the on screen coordinates of events from the window
relative coordinates, using the frame rect will include the decorations
added by the WM for SSD windows. This was causing the calculated
coordinates to be slightly off. Fix this by using the client rect for
SSD windows.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2319>
Absolute screen coordinates are impossible for Wayland clients to
provide, because the clients don't know where the window is positioned.
Some clients, such as the ones using GTK 3 were providing window
relative coordinates even when screen coordinates were requested,
while others, such as GTK 4 clients, were just returning an error for
caret events or also window-relative coordinates for focus events.
So for this to work on Wayland we have to request window-relative
coordinates and translate them to the current focus window.
To ensure the correct coordinates, we have to only consider events
coming from the current focus window. All other events are filtered out
now. As a side effect this also fixes the magnifier always jumping
to a terminal cursor whenever there was some output, even if the window
was not focused.
This also needs some special handling for events coming from the shell
itself, which should not be translated to the focus window either. As
another side effect this fixes another bug that was caused by these
events already including scaling and getting scaled again.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5509
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2301>
If we don't set the height property to -1 before requesting the
preferred height, get_preferred_height() will just return us the fixed
height that has been set before. We don't want this behavior here, so
set the height to -1 before calling get_preferred_height().
This fixes a resizing issue where the keyboard is sized incorrectly
after switching the monitor into portrait mode and back.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2306>
Both bluetooth and screencast support are based on build checks
right now. However in both cases, the dependency is only consumed
at runtime via the typelib, so let's actually check for that.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2297>
We currently decide at build time whether to include screencast
support, based on whether the required gst/pipewire library headers
are installed.
That check is imprecise, because having the library headers available
at build time doesn't necessarily mean that the libraries are there
at runtime, or that the corresponding typelibs are installed.
It makes more sense to check the requirements at runtime, so prepare
for that by installing the screencast service unconditionally, but
bail out early if the dependencies aren't met.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2297>
The problem is that " 9:59 AM" (notice the space at the beginning) and
"12:59 AM" strings, when centred, look misaligned —
strings padded with a space look off to the right by nearly
half a character. This happens because the font feature "tnum",
used to make numbers monospace, doesn't work on spaces.
The commit overcomes this by aligning time labels to the end.
However, this won't work for locales with AM/PM strings of different
lengths, so they are aligned to the start instead to minimise offset.
It's too complex to know whether the used locale has different
AM/PM string lengths. Instead, every time the time changes, it
determines whether all the time labels have the same amount of characters.
Fixes#5438
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2294>
We update the visibility on state or stream changes, but those
changes may never happen if pipewire-pulse/pulseaudio isn't
available (for example when running as root).
Hiding the sliders is preferable in that case to showing non-working
controls.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2295>
When selecting the largest possible icon size for restricted vertical or
horizontal space the options for low resolution icons were rather coarse
grained. This could often result in seemingly too small icons being
chosen in the app grid on systems with low vertical resolution, because
the next larger size would exceed the limit by a few pixels.
This adds two more commonly used sizes for application icons to have
some more options with restricted space.
Helps: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2173
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2289>
Commit 7419674b changed some grabs from requiring both mouse and
keyboard grabs to be considered successful to only requiring either of
them.
Due to this it was possible for example to open the overview or the
screenshot UI with a client (such as Chrome when opening a menu) holding
the mouse grab. This then made it impossible to interact with the UI
using the mouse (or keyboard) and if attempted could result in an
unresponsive UI.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5414
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2287>
Commit ca4f6e0123 was supposed to show the
"cellular-disabled" icon when wwan is disabled. For wwan, just like for
bluetooth wwan networks, we probably want this to include the "not
connected" state, because disconnecting from cellular service de-facto
means disabling it.
So switch the check to show the "cellular-disabled" icon to also use the
icon whether there's no active connection, not only when the wwan device
is turned off.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5401
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2283>
The swipeTracker wants the distance between two pages passed to it in
confirmSwipe(). In case of the app grid, the correct distance is not the
size of the scrollView (which has the width of the whole screen), but
instead the allocation size of the iconGrid (which is the actual size
of a page in the grid).
So pass the allocation size of the iconGrid to the swipeTracker, this
makes sure the pages move perfectly in sync with the pointer when
dragging using the mouse or touchscreen.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2275>
With commit c29e0cf6e6 the grabHelper
already started using a similar mechanism to funnel events to the osk
while a ClutterGrab is in effect. ModalDialog, the unlockDialog and
lookingGlass don't make use of the grabHelper though, they use
Main.pushModal() themselves, so those need to funnel the events to the
OSK themselves.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2263>
We currently complete the animation using an onComplete handler,
which only runs if the corresponding transition was stopped when
finished.
While it is unexpected that the transition is interrupted, it can
apparently happen under some circumstances (like VMs with qlx).
The consequences of that are pretty bad, mainly due to the cover
pane that prevents input during the animation not getting removed.
Address this by always completing the animation when the transition
is stopped, regardless of whether it completed or not.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5337
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2269>
If one of these libraries breaks its GIR API in future, then upgrading
packages unrelated to gnome-shell might pull in the newer version,
causing gnome-shell to crash when it gets a newer GIR API that is
incompatible with its expectations. For example, this seems to be
happening in Debian testing at the moment, when GNOME Shell 41.4
imports GWeather and can get version 4.0 instead of the version 3.0 that
it expected.
Adding explicit API versions at the time the newer version is released
is too late, because that will still let the newer version of the GIR API
break pre-existing GNOME Shell packages. Prevent similar crashes in
future by making the desired versions explicit.
This is done for all third-party libraries except GLib, similar to the
common practice in Python code; if GLib breaks API, then that will be
a disruptive change to the whole GLib/GObject ecosystem, regardless.
Gvc, Meta, Shell, Shew, St are not included because they're private
(only exist in a non-default search path entry).
Clutter and Cogl *are* included, because we need to import the fork of
them that comes with Meta, as opposed to their deprecated standalone
versions.
Signed-off-by: Simon McVittie <smcv@debian.org>
Bug-Debian: https://bugs.debian.org/1008926
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2261>
MetaWindow.move_to_monitor() can no longer be assumed to have updated
the monitor on return, as under wayland, if the move involves a size
change, the monitor state will only be updated after the new size has
been synced with the client.
If that happens, trying to change the workspace of the moved window
fails, as it is still considered on-all-workspaces until it leaves
the secondary monitor.
It's possible to work around this by waiting for the window to actually
enter the requested monitor. That's finicky enough to warrant a helper
funtion, so add one.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/893
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2259>
If the timezone offset calculation in the World Clocks contains non-zero
minutes, then a decimal Hours value is being displayed. Limit the Hours value
to integers by using Math.floor().
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2255>
On some hardware combinations the display can be known, then unknown again. Meaining that
when the update monitors function is called it will have a value, then be called again
setting this.primaryMonitor to null. If the timing is just right gnome shell will
loadBackground, then by the time the animation is ready the monitor will be gone,
thus methods will be called on a null value. This adds more checks for a valid
primary monitor, and wont play the animation until the system is idle AND has a valid
priamry monitor.
Fixes: #5003
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2144>
T_() is a convenience shortcut for looking up a string from the
locale defined by LC_TIME, but it isn't recognized as a gettext
keyword. To do that, we also have to wrap the string in N_() or
NC_().
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2246>
It existed to fade out/in `nautilus-desktop` for the overview, but it only
ever worked for X11 sessions (`Meta.WindowType.DESKTOP`) and
`nautilus-desktop` no longer exists anyway.
While I had suggested extending it in the past (!1395), that work was
never finished and since then the DING extension has implemented its
own visibility toggling. There seems little value in keeping the old
fade logic around in gnome-shell. Removing it actually fixes a bug with
DING (https://launchpad.net/bugs/1965072).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2244>
Creating these default folders still doesn't work. After some
investigation I found that's because the template we use for
the path when creating the `child` `Gio.Settings` instance
results in a double slash - it comes out as e.g.
/org/gnome/desktop/app-folders//folders/Utilities/ . dconf does
not gracefully handle this as many other things that handle
paths do, it considers it a programmer error. It results in
error messages like:
dconf_changeset_set: assertion 'dconf_is_path (path, NULL)' failed
which is slightly confusing. Anyway, we fix it by removing a
slash from the template.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2242>
