When not in radio-mode - that is, when the connection is the only
connection for its device - we want the item to represent the
device as a whole.
Achieve this with a small ConnectionItem subclass that adds a
:device-name property for that purpose.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
When not in radio-mode - that is, in the single-connection
case - the item currently uses a plain 'Connect' label.
That is OK while the item is inside a submenu that describes
the device, but we will soon stop using a submenu when a single
item can describe the device as a whole.
Prepare for that by adding an icon that is shown when in non-radio
mode, and include the device name in the label in that case.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2407>
We do want to update the best AP on strength change, in case we
can switch to a better one.
But even if we can't and the AP is unchanged, the icon should
be updated to reflect the change.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2414>
Right now DeviceCategory is a small section wrapper that shows
a summary instead of its content if it contains too many items.
It will eventually eventually turn into the base class for
network device quick toggles. Who would have thought that
when it was added for the "there's a computer with 32 ethernet
cards" fringe case?!
For now, give it a more appropriate name and use device types
instead of our made-up categories, now that the two map neatly.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
It's odd to swap out a switch with a status label, and the
information isn't that helpful to begin with: It's either
transient (connecting, deactivating, ...), or too little to
be meaningful (unknown, failed, ...).
We're also perfectly happy to not show it in "label mode"
(i.e. when there's just one VPN).
Just get rid of it.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
Stop providing detailed state descriptions, instead use a name
that best represents the device at the moment (like a wifi SSID,
the carrier name, or the device name as determined by network manager).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
The _devices property is another case of overloading the
"device" term.
Fun fact:
this._devices[device._delegate.category].devices
uses three different meanings of "device" (section, NM.Device, item).
The devices array in sections won't be around for much longer,
but the property that tracks the sections is worth renaming.
While at it, use a map instead of a plain object, which has a
guaranteed order when iterating (which will come in handy later).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
Different access points can belong to the same wireless network. As
NetworkManager doesn't handle this for us, we need to track networks
ourselves, and we currently do this using ad-hoc object literals and
monkey-patching.
Clean this up by factoring out a proper WirelessNetwork class, and
associate them to items with a map.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
Interpreting the different flags is better left to the domain
experts at NetworkManager. It is also much more likely that
NM's own functions will handle newly added flags than our own
code.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
There is a straight mapping between running/enabled and visibility,
so bind them instead of using a signal handler.
_syncConnectivity() is called both from _syncMainConnection() and
on connectivity changes, which should cover any running/enabled
changes.
That just leaves updating the icon on state changes.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
We would want the signals to be disconnected if we ever happened to
destroy the indicator. Even if we don't, connectObject() is simply
nicer when connecting half a dozen handlers at once.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
There is only one case where we show a notification: When activating
a connection failed.
There is therefore no reason for a generic wrapper around the
notification API. Likewise, tracking the source is a bit pointless,
given that the notification is transient. In fact, as we destroy
an existing notification *before* checking for the source, any
previous source will be gone by that point.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
The function is a handler for the `notify::state` handler, so
the state and reason parameters used in the checks are always
undefined.
In addition, `DEACTIVATED` is not (just) a failure state. We
clearly don't want to complain about a failed connection when
the change happened on request of the user.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
We never used it, so after more than ten years, it seems safe to
assume that we never will.
Plus different items pass different types, which makes it pretty
much impossible to use, even if we wanted to (which apparently
we don't 🤷️)
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
When deciding on whether to show the 'no-route' icon, we check
for the client's connectivity *and* whether the devices's active
connection is used as primary connection.
This is currently masked by the indicator updating the icon on
connection changes anyway, but items should still notify the
change themselves.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
The wireless device item tracks the active access point in order
to update its icon on signal strength changes.
However we currently don't synchronize the initial state, so we
miss strength changes until the first access-point change.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
Otherwise any unrelated errors in that function are hidden,
because exceptions in async functions are turned into promise
rejections (and JS cannot know that we won't handle it at a later
point).
It wouldn't happen to me of course 😉
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
I wasn't genuiously going to touch those lines, but I ran into
a limitation of the run-eslint script:
It currently bases changed lines on a diff between HEAD and main
instead of the commit-by-commit log.
The two can vary quite a bit when shuffling code around, and those
are the lines the tool kept complaining about.
I'll look into improving the script, but for now it's quicker to
just shut it up by fixing up the complaints.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2406>
Now that the old system menu has been ported over, we can move
the power toggle to its intended place. The main difference to
the stand-alone toggle is that the button now uses its natural
size rather than the fixed size of regular quick items.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2393>
This port is a bit messier than the previous ones, because the
existing menu section translates less directly to the new UI,
which uses a row of individual toggles for settings, lock and
shutdown.
In order to not complicate the grid layout further by supporting
rows with a different number of columns than the overall grid and
children at their natural size, create a custom, non-reactive
SystemItem item that spans an entire row, and contains the individual
toggles.
This works quite well, even with the shutdown item that uses a menu
for the various actions.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2393>
With menu support in place, this is now a straight-forward port:
Just add the existing profiles section to a QuickToggleMenu instead
of a submenu item.
The toggle itself now switches between 'balanced' and the last used
non-default profile.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2393>
The aggregate menu with its submenus isn't well-suited for simple
on-off actions, so we didn't expose the global color-scheme support
that was introduced last cycle.
Quick settings on the other hand are a natural fit for actions like
this, so add a corresponding toggle.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
The power indicator should not be a regular quick toggle, but
instead be part of a "system area" row at the top of the menu.
But as in the end it is still a simple button, we can do the
port to quick settings now, and move it later when the system
row is implemented.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
For now, this is another simple toggle. The icon, state and
visibility reflect what the old menu did, and the top bar
icon is still only shown when devices are currently connected.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
Another simple toggle. Unlike the old menu, it is always shown
if airplane mode is supported, not just while airplane mode is
active.
We still only show the top bar icon while airplane mode is on.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
Night-light is now a simple, always visible toggle that directly
controls the underlying setting. No change to the top bar icon,
which is still only shown while night-light is active (read: at night).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
After porting the more complex cases - in particular those that
affect a module's API - we are left with straight-forward D-Bus
method calls that can be moved to promise-based wrappers in one
go.
For consistency, this also switches from Remote to Async where
the call result is ignored.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2344>
The latest mockups move the screen sharing indicator into a
separate control, similar to the existing indicator for built-in
screen recordings.
As this removes the submenu and only keeps the top bar icon (for
external screen recordings), this will smooth the transition to
quick settings.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
Location services aren't expected to change frequently: They are
either disabled globally, or permissions are granted on a per-app
basis.
This is less of a concern while the setting is exposed in a small
submenu, but as we moving to quick settings, it does not deserve
the prominence of a quick toggle. Just the top bar icon and Settings'
privacy panel should be enough.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
Other than connecting stream when necessary, the volume menu
only forwards slider events to the indicator, and method calls
from the indicator to the appropriate slider.
Just cut our the middle-man and let the indicator handle the
slider items directly.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
On error, we currently print a warning and bail out early. That
means we don't hide the slider, despite it being non-functional
without the proxy.
Fix this by making sure _sync() is called in any case. While at
it, use an appropriate log level for the warning message.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
Properties are null while a proxy has no owner. Javascript helpfully
coerces that into `Number(null)` (a.k.a. 0), so we end up with a
broken slider.
Explicitly check that the value is an integer before doing the
comparison to catch that case.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
The new class abstracts away the nitty-gritty of bluetooth- and
airplane-mode handling, and exposes just what the UI needs.
This will become more important with quick settings, where there's
a stronger separation between top bar icon and quick toggle.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
There's no good reason for waiting for the proxy to be initialized
to connect signals. In fact, connecting the signal beforehand
ensures that the handler is in place when the proxy fetches the
properties, so we don't have to call the handler explicitly.
That in turn allows us to rely on the signal parameters to only process
changed properties.
To achieve that, construct the proxy manually, and then initialize
it asynchronously in a Promise.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
There's no good reason for waiting for the proxy to be initialized
to connect signals. In fact, connecting the signal beforehand
ensures that the handler is in place when the proxy fetches the
properties, so we don't have to call the handler explicitly.
That in turn will allow us in a follow-up to rely on the signal
parameters to only process changed properties.
To achieve that, construct the proxy manually, and then initialize
it asynchronously in a Promise.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
`ShouldShowAirplaneMode` only considers whether airplane mode
should be shown for the form factor, not whether there are
any actual kill switches available.
That's tracked in a separate property, `HasAirplaneMode`.
Take that into account for our `:show-airplane-mode` property,
so that it reflects when airplane mode should and *can* be shown.
Right now we only show airplane mode when it is enabled (and
therefore available), but this will change in the future.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2385>
There's no good reason for waiting for the proxy to be initialized
to connect signals. In fact, connecting the signal beforehand
ensures that the handler is in place when the proxy fetches the
properties, so we don't have to call the handler explicitly.
That in turn will allow us in a follow-up to rely on the signal
parameters to only process changed properties.
To achieve that by constructing the proxy manually, and then
initialize it asynchronously in a Promise.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2385>
In case where there are multiple in- or output devices, pulseaudio
or pipewire can pick the "wrong" one by default.
Allow users to change devices without opening sound settings by
adding a submenu to the sliders when there is more than one device.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2380>
Introduce a new class, EventEmitter, which implements signal
handling for pure JavaScript classes. EventEmitter still
utilizes GJS' addSignalMethods internally.
EventEmitter allows static typechecking to understand the
structure of event-emitting JS classes and makes creating
child classes simpler.
The name 'EventEmitter' mirrors a common name for this pattern
in Node and in JS libraries.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2043>
We update the visibility on state or stream changes, but those
changes may never happen if pipewire-pulse/pulseaudio isn't
available (for example when running as root).
Hiding the sliders is preferable in that case to showing non-working
controls.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2295>
Commit ca4f6e0123 was supposed to show the
"cellular-disabled" icon when wwan is disabled. For wwan, just like for
bluetooth wwan networks, we probably want this to include the "not
connected" state, because disconnecting from cellular service de-facto
means disabling it.
So switch the check to show the "cellular-disabled" icon to also use the
icon whether there's no active connection, not only when the wwan device
is turned off.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5401
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2283>
In order to make very short screen capture sessions more visible, let
the indicator remain visible, but a bit greyed out, for some seconds.
This makes it more obvious something was just capturing the screen.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2132>
Start using the new methods to simplify signal cleanup. For now,
focus on replacing existing cleanups; in most cases this means
signals connected in the constructor and disconnected on destroy,
but also other cases with a similarly defined lifetime (say: from
show to hide).
This doesn't change signal connections that only exist for a short
time (say: once), handlers that are connected on-demand (say: the
first time a particular method is called), or connections that
aren't tracked (read: disconnected) at all.
We will eventually replace the latter with connectObject() as
well - especially from actor subclasses - but the changeset is
already big enough as-is :-)
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1953>
With the porting of gnome-bluetooth to the new GListModel API the
behavior regarding removing adapters changed: It now no longer
guarantees to emit "device-removed" signals for the paired devices when
the adapter gets removed.
This means we need to do that ourselves now, so clear the list of
connected signals when the default adapter changes.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2214>
Turns out this broke showing the bluetooth menu entry for adapters which
rely on the had-devices-setup property being set while turned off. These
adapters are completely removed from the system by the firmware after
powering them off, so in that case there is no default adapter anymore,
although we still want to show the menu.
This reverts commit aaf47167b5.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2214>
We have made good progress on object literals as well, although there
are still a lot that use the old style, given how ubiquitous object
literals are.
But the needed reindentation isn't overly intrusive, as changes are
limited to the object literals themselves (i.e. they don't affect
surrounding code).
And given that object literals account for quite a bit of the remaining
differences between regular and legacy rules, doing the transition now
is still worthwhile.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2200>
While _sync() does already handle the case where there's no adapter just
fine (hiding the item and the indicator), let's make the handling a bit
more obvious and add an explicit check for !this._adapter where we bail
out and hide the UI.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2188>
There's two ways bluetooth can be powered off/on for us: One way is to
go via airplane mode (which uses rfkill), and the second way is to tell
BlueZ to turn off the device. Now rfkill always has the final say on
whether bluetooth is off, BlueZ OTOH has the final say on whether
bluetooth is on.
This means when we want to know whether bluetooth is turned on, we only
have to ask BlueZ, so simply read this._client.default_adapter_powered
for that.
For turning bluetooth on or off we use rfkill, but when turning it on,
make sure it's turned on in Bluez, too.
FTR, this is exactly the same way the Bluetooth panel in Settings
handles this.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2188>
The indicator shows the recording duration and lets the user stop it on
click. It is more discoverable than the stop entry in the aggregate
menu.
The class extends ButtonBox directly rather than Button because Button
does nothing that it uses, and actually causes issues with its dummy
menu (its vfunc_hide() throws an "open-state-changed: Error: incorrect
pop").
The menu-set signal declaration is required by the panel.
The screencast is stopped upon button press in vfunc_event(), which
matches PanelMenu.Button's input handling.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2163>
If the finish function isn't specified, promisify will now try
to use the async name without '_async'/'_begin' suffix (if any)
and '_finish' appended.
Everything except IBus uses a variation of that pattern, so there's
quite a bit of boilerplate we get to remove…
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2174>
With the new boolean setting, the "High Contrast" toggle can now
simply toggle the setting instead of the current gtk/icon-theme
shenanigans.
This isn't only much simpler, but will also make switching between
high-contrast and a non-default theme reliable at last.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2069>
This is specifically for stopping the screenshot UI screencasts for now.
It's possible to stop arbitrary screen recording handles, however due to
an issue with pipewiresrc, this method cannot currently work for cleanly
stopping Shell's own screen recordings. Hence the best we can do is to
handle just the screenshot UI screencasts to let them stop cleanly.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2103>
