POTFILES.in was missing some files.
"Activities" is not easily translatable into some languages, e.g. Russian,
so suggest using the word for "Overview" instead.
Currently we use 0xefefefff as a background color for non ARGB tray icons,
which looks out of place (i.e does not fit the panel's background gradient).
Change it to 0x0b0b0bff to fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=597148
Miscellaneous fixes from review:
- Distribute calendar.js and the interactive test
- Make the pointless protection against leap seconds actually work
by starting in the middle of the day so that forward/back always
move a day.
- Use a variable instead of an inline '8' to know where to start
when removing old day actors.
- Remove a stray comment from the test
https://bugzilla.gnome.org/show_bug.cgi?id=596432
js/ui/calendar.js: Generic calendar widget
tests/interactive/calendar.js: Basic test of the calendar
js/ui/panel.js: Add a pop-down from the clock that shows a
calendar widget. The pop-down is not menu-like to allow the user to
interact with an application while looking at the calendar.
gnome-shell.css: Add theming for calendar, calendar popup, and for
buttons on the panel
https://bugzilla.gnome.org/show_bug.cgi?id=596432
Before Clutter gained accessors for event information, we had
shell_global_ functions. Now that Clutter has them, use them and
delete the ShellGlobal code.
http://bugzilla.gnome.org/show_bug.cgi?id=594561
Make Button class purely about adding visuals, and use ShellButtonBox
for behavior. API equivalences:
shell.button => shell.actor [for consistency]
staysPressed parameter to constructor => replaced by manually setting
the 'active' property of button.actor as appropriate
pressIn/release => button.actor.active = true/false
enter-event/leave-event signals => button.actor notify::hover
Along the way, this fixes a bug with the user status menu where it was
not getting set to active because the button was getting a leave
(triggered by the menu popping up and grabbing the pointer) before for
button release, which disabled the staysPressed behavior.
Reported by Michael Meeks
http://bugzilla.gnome.org/show_bug.cgi?id=593471
shell-global.[ch]: Add shell_global_display_is_grabbed() that
uses the newly added meta_display_get_grab_op() to check
for existing grabs.
shell-status-menu.[ch]: Add shell_status_menu_is_active() to
check if the menu is popped up. Check for active grabs before
popping the menu up. Use gtk_menu_popdown() rather than
gtk_widget_hide(). Remove an excess gtk_widget_show() and
some excess casts.
panel.js: Check whether the status menu is popped up after button
release, and if it's not popped up, unhighlight the button.
Reported by Nuno Donato
http://bugzilla.gnome.org/show_bug.cgi?id=593362
For Firefox/OpenOffice, right now we have a workaround in the
code where we look at their "title" property. However, we
weren't monitoring that property for changes, and I'm fairly
certain Firefox at least was mapping a window and then very
quickly changing its title after. So we need to handle
dynamic changes.
Split out the wm_class mapping from the title hack. It was
messy and weird to have the two mixed because they're not
at all related, and we're not trying to handle WM_CLASS changes
right now.
Explicitly connect to notify::title in the case where we had
a title fallback. When a title changes, just treat it as
an add+remove.
In the Application Menu area in the panel, hook up to app-added
and app-removed so we get notification of the active app changing.
This fixes a bug where we were already using this._hotCorner
in _onHotCornerEnvironsLeft() and were incorrectly setting
this._hotCornerEntered to false when the hot corner was
re-entered from the environs.
Using a larger area around the hot corner to decide if the user has left the
hot corner prevents triggering the hot corner multiple times due to an
accidental jitter.
We don't have a lot of strings, and what ones we do have we've
been avoiding duplication. This patch adds calls to _() i.e. gettext
for those strings we do have.
Remove the last use of passing width into Dash by having the
Pane with the previews scaling dynamically and relying on
Clutter scaling.
If we only have one workspace, don't display a selection frame
for it.
Rework Dash into a searchArea and sectionArea, which get
explicitly sized by overlay.js. We use the workspaces size
to choose the size of those dash areas.
Switch dash colors/boxes etc. to ones from shell-black02.
Add a gradient to the panel.
Add a magnifier.svg for use in search.
minWidth and minHeight arguments of the Button class were not used.
Panel buttons need their height to be explicitly specified as
PANEL_HEIGHT to take up full panel height. This fixes the problem with the
user not being able to click at the very top edge of the panel to activate
the button.
This is a start at the "Active Appliction Item" component of the
shell design. Currently we just show the currently focused
application. When launching a new application, we show that as well.
The implementation here is not complete; basically when launching
we de-focus the active one, and the application well shows the
most recent startup sequence.
This kind of fails in the case of multiple sequences, and we
also don't correctly de-focus the current window in other
launch paths.
There was lots of fixed positioning in the Panel; now it is completely
dynamic, and width/height is driven from main.js. We still have a
global constant Panel.PANEL_HEIGHT, but this is a big step towards
eliminating it.
Also, this avoids overdraw in the "way too many tray icons" case. The
clock will shift left.
Replace 'overlay' with the more descriptive name 'overview'
where the Activities Overview is meant. Call it Overview
(capitalized) in code comments.
The overlay-group and overlay-key provided by Mutter are not
affected, since they may be used for other components than
the Activities Overview.
It's both intuitive to go to the corner of the screen
and click the activities button at the same time.
Both actions bring up the overlay, but combined
they cancel each other out. This commit makes
clicking the hot corner not cancel the act of
going to the hot corner.
Based on a patch from Ray Strode.
Use the 1x1 actor in the top left corner of the screen to enter and leave
the overview mode by just moving the mouse over to it.
No delay is used for triggering the hot corner because a delay significant
enough to allow moving away the mouse to avoid triggering it ruins the desired
flow when triggering the hot corner is actually intended.
The hot corner is not enabled in the full screen mode because the application
or the virtual system might have a hot corner of its own in that place.
This patch attempts to adjust if we have many tray icons; currently
the simple algorithm is to drop down to a spacing of 8 if we have
more than 6. In the future we should fix the panel layout so that
the clock moves to the side.
The semi-transparent gradient on the panel is replaced by a
solid black background. The shadow below the panel is removed.
The clock is put at the center instead of the right side of
the panel and has the date removed. The user icon is hidden.
Instead of boldface, a regular font is used. Padding is added
on each side and between panel elements.
button.js: Allow for custom text colors and fonts.
panel.js: Change the panel colors and layout, remove the shadow.
Make the ClutterText and ClutterTexture from the status menu
button available to JavaScript, and from there improve the
font definition of the user name.
shell-status-menu.[ch]: Add public get_name() and get_icon()
functions that return the user name label and icon
texture, remove the markup from update_name_text().
panel.js: Set the font for the button consistently with that
of the other panel labels.
This removes the border and padding and aligns the box to the top. Perhaps we
could push the padding down into the active area of the icon since it does look
a bit nicer with it.
http://bugzilla.gnome.org/show_bug.cgi?id=583139
Adds an explicit "chrome" layer for the panel (and later the sidebar),
managing the input region and struts for them, and hiding them when
fullscreen windows are present or the user enters the overlay.
http://bugzilla.gnome.org/show_bug.cgi?id=581771
In addition to pressing the Activities button, the overlay can be entered
by pressing the System key or Alt+F1. We want the button to look pressed in
in these cases too.
Rather than having main.js manage this, put it into overlay.js, and
have the overlay object emit signals that other code can watch to do
things when the overlay is showing/shown/hiding/hidden.
Try to fix all places where we accidentally used foo_bar instead
of fooBar for function names, function parameters, and variables.
(Lucas Rocha pointed out one example.)
http://bugzilla.gnome.org/show_bug.cgi?id=581141
Now code can call Main.addShellActor(actor) to declare that that actor
is part of the shell, and so it should (a) be protected by wm struts, and
(b) be part of the stage input area, and then that code automatically
deals with updating if the actor changes size or visibility.
The panel show/hide changes broke things if window restacking occurred
while the overlay was active. Now instead of having the panel set the
input area itself, main.js just watches whether or not the panel is
visible, and updates things itself (taking the modal state into
account as well).
http://bugzilla.gnome.org/show_bug.cgi?id=576903
The panel looks nicer when it is drawn as a semi-transparent gradient
above the background color.
shell-global.[ch]: Add a function that creates vertical gradient actors.
panel.js: Change the look of the panel and put the tray in a framed box.
overlay.js: Extend the overlay background to behind the panel.
Because we can't set the stage input area to a non-rectangular shape,
we don't allow the panel to be partially overlapped; it is always either
on top, or else completely hidden.
tools/build/gnome-shell.modules: Point at master branch of Clutter (0.9)
and make gobject-introspection a dep of Clutter.
configure.ac src/Makefile.am: Use Clutter-0.9
js/ui/button.js js/ui/genericDisplay.js js/ui/overlay.js js/ui/panel.js
js/ui/runDialog.js js/ui/workspaces.js src/shell-status-menu.c:
Use ClutterText instead of ClutterLabel and ClutterEntry
js/ui/workspaces.js js/ui/genericDisplay.js: Use ClutterClone instead
of ClutterCloneTexture
src/shell-global.[ch]: Add Shell.get_event_key_symbol() to workaround
unaccessibility of clutter_key_event_symbol() to use.
js/runDialog.js js/overlay.js: Use Shell.get_event_key_symbol() as
appropriate.
Fix the clock to update exactly on the minute, rather than at a random
time within the minute.
Patch from RainCT (Siegfried Gevatter)
svn path=/trunk/; revision=98
Revert most JS changes in commit:
Fri Nov 28 20:12:20 2008 +0000
Convert all JS style to be uniform, add Eclipse settings bits
Instead, just add 'indent-tabs-mode: nil' to the mode lines and convert
tabs to spaces. The indentation no longer exactly matches the Eclipse
settings, since they differ in some ways from the style we are trying
to achieve.
svn path=/trunk/; revision=97