Instead of keeping a list of all timelines, and connecting to
signals and weak notifies, simply keep a list of running timelines;
this greatly simplifies both the book-keeping, and also determining
if there are any running timelines.
http://bugzilla.openedhand.com/show_bug.cgi?id=1637
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Remove code to advance the master clock after drawing a frame; if
there are any running timelines the master clock will do another
frame by itself, and the clock will be advanced before running
that frame.
With this change, there is no point in queueing an extra frame
redraw after completing a timeline, since we are always advancing
the timeline *before* redrawing, so remove that code as well.
(This does mean that calling clutter_timeline_stop() won't implicitly
cause the stage to be redrawn; this doesn't seem like something
an app should rely on in any case.)
http://bugzilla.openedhand.com/show_bug.cgi?id=1637
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The clutter_stage_fullscreen() and clutter_stage_unfullscreen() are
a GDK-ism. The underlying implementation is already using an accessor
with a boolean parameter.
This should take the amount of collisions between properties, methods
and signals to zero.
The :fullscreen property is very much confusing as it is implemented.
It can be written to a value, but the whole process might fail. If we
set:
g_object_set (stage, "fullscreen", TRUE, NULL);
and the fullscreen process fails or it is not implemented, the value
will be reset to FALSE (if we're lucky) or left TRUE (most of the
times).
The writability is just a shorthand for invoking clutter_stage_fullscreen()
or clutter_stage_unfullscreen() depending on a boolean value without
using an if.
The :fullscreen property also greatly confuses high level languages,
since the same symbol is used:
- for a method name (Clutter.Stage.fullscreen())
- for a property name (Clutter.Stage.fullscreen)
- for a signal (Clutter.Stage::fullscreen)
For these reasons, the :fullscreen should be renamed to :fullscreen-set
and be read-only. Implementations of the Stage should only emit the
StageState event to change from normal to fullscreen, and the Stage
will automatically update the value of the property and emit a notify
signal for it.
Instead of blacklisting experimental features at the end we can
explicitly mark backends and image backends near their checks and
provide a summary at the end.
There have been changes in JSON-GLib upstream to clean up the
data structures, and facilitate introspection.
We still not use the updated JsonParser with the (private) JsonScanner
code, since it's a fork of GLib's GScanner.
Otherwise if there is an error before the slices are created it will
try to free the first_pixels array and crash.
It now also checks whether first_pixels has been created before using
it to update the mipmaps. This should only happen for
cogl_texture_new_from_foreign and doesn't matter if the FBO extension
is available. It would be better in this case to fetch the first pixel
using glGetTexImage as Owen mentioned in the last commit.
tex->first_pixels was never set for foreign textures, leading
to a crash when the texture object is freed.
As a quick fix, simply set to NULL. A more complete fix would
require remembering if we had ever seen the first pixel uploaded,
and if not, doing a glReadPixel to get it before triggering the
mipmap update.
http://bugzilla.openedhand.com/show_bug.cgi?id=1645
Signed-off-by: Neil Roberts <neil@linux.intel.com>
It's very common that there's no reasonable fallback to do if the
blend or combine string you set isn't supported. So, rather than
requiring everybody to pass in a GError purely to catch syntax erorrs,
automatically g_warning() if a parse error is encountered and @error
is NULL.
http://bugzilla.openedhand.com/show_bug.cgi?id=1642
Signed-off-by: Robert Bragg <robert@linux.intel.com>
When we complete a timeline, we clamp the elapsed_time variable
to the range of the timeline. We need to adjust msecs_delta so that
when we check for hit markers we have the correct interval.
http://bugzilla.openedhand.com/show_bug.cgi?id=1641
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The Animation should be referenced during the notification of the
alpha value, since the callback is invoked depending on the Alpha
and it won't vivify the Animation instance for us.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1537
ClutterEvent is not really gobject-introspection friendly because
of the whole discriminated union thing. In particular, if you get
a ClutterEvent in a signal handler, you probably can't access the
event-type-specific fields, and you probably can't call methods
like clutter_key_event_symbol() either, because you can't cast the
ClutterEvent to a ClutterKeyEvent.
The cleanest solution is to turn every accessor into ClutterEvent
methods, accepting a ClutterEvent* and internally checking the event
type.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1585
According to clutter_texture_set_cogl_texture you should unref the handle as
the texture takes its own.
Signed-off-by: Robert Bragg <robert@linux.intel.com>
The OpenGL spec states that if you create a pixmap using glXCreatePixmap you
should use glXDestroyPixmap to destroy it.
Signed-off-by: Robert Bragg <robert@linux.intel.com>
Setting the pixmap for an unrealized ClutterGLXTexturePixmap should
not cause it to be realized, and certainly shouldn't cause the the
REALIZED flag to be set without using clutter_actor_realize().
This patch uses the simple approach that;
- pixmap changes on an unrealized ClutterGLXTexturePixmap
are ignored
- when the ClutterGLXTexturePixmap is realized, we then create
the GLXPixmap and the corresponding texture.
The call to clutter_glx_texture_pixmap_update_area() is moved
from create_cogl_texture() to
clutter_glx_texture_pixmap_create_glx_pixmap() since
create_cogl_texture() is only called from one place, and updating
the area is really something we do *after* creating the texture,
not part of creating the texture.
clutter_glx_texture_pixmap_create_glx_pixmap() is reorganized a
bit to avoid debug-logging confusingly if it's called before a pixmap
has been set, and for readability.
http://bugzilla.openedhand.com/show_bug.cgi?id=1635
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
An implementaton of realize() never needs to set the
CLUTTER_ACTOR_REALIZED flag, though it can unset the flag if
things fail unexpectedly. (Previously, stage backend implementations
had to do this since clutter_actor_realize() wasn't used; this
is no longer the case.)
http://bugzilla.openedhand.com/show_bug.cgi?id=1634
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Due to the accumulation of floating point errors, natural_width
and min_width can diverge significantly even if the math for
computing them is correct. So just clamp natural_width to
min_width instead of warning about it.
http://bugzilla.openedhand.com/show_bug.cgi?id=1632
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If we use float temporaries when computing the bounds of
a group, then, depending on what variables are kept in registers
and what stored on the stack, the accumulated difference between
natural_width and min_width can be more than FLOAT_EPSILON.
Using double temporaries will eliminate the difference in most
cases, or, very rarely, reduce it to a last-bit error.
http://bugzilla.openedhand.com/show_bug.cgi?id=1632
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If we are cloning an source actor with an unmapped parent, then when
we temporarily map the source actor:
- We need to skip the check that a mapped actor has a mapped
parent.
- We need to realize the actor's parents before mapping it,
or we'll get an assertion failure in clutter_actor_update_map_state()
because an actor with an unmapped parent is !may_be_realized.
http://bugzilla.openedhand.com/show_bug.cgi?id=1633
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Use the AS_COMPILER_FLAGS to check whether the maintainer compiler flags
we use are supported; this should fail gracefully and only use the ones
that the compiler actually understands.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1639
Setting the stage size using clutter_actor_set_size() is almost always
wrong: the X11 stage implementation should save the size and queue a
relayout -- like it does when receiving a ConfigureNotify. The same
should happen when setting it to be full screen.
Since we build the Cogl GIR inside /clutter/cogl we should be looking
there when building the Clutter GIR. Otherwise g-ir-scanner will look
inside the gir directory -- and if you never built Clutter before it
will error out.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1638
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The test was quiting after the 2nd frame but it should be the third frame because
the test doesn't actually check results until the third frame due to the workaround
for drivers with broken glReadPixels.
(When first written the test would have been verified with the
clutter_main_quit() commented out which gives visual feedback of what the
test does, so the off by one would have snuck in just before uncommenting
and pushing.)
The load-finished signal has a GError* argument which is meant to
signify whether the loading was successful. However many of the
places in ClutterTexture that emit this signal directly pass their
'error' variable which is a GError** and will be NULL or not
completely independently of whether there was an error. If the
argument was dereferenced it would probably crash.
The test-texture-async interactive test case should also verify
that the ::load-finished signal is correctly emitted.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1622
Correctly apply De Morgan's laws to the short-circuit test in
clutter_timeline_pause(); it was short-circuiting always and
never actually pausing.
http://bugzilla.openedhand.com/show_bug.cgi?id=1629
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The commit 2c95b378 prevents clutter_animation_setup_property from being
called with fixed:: property names. This patch adds a additional
parameter "is_fixed" to clutter_animation_setup_property instead of
searching for "fixed::" in property_name.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
It seems GNU Gold (the new linker) either behaves as if with
--no-undefined by default, or has some issue preventing it from not
doing that when instructed to (I'm not sure if this actually
happens). In any case, clutter uses the Xshm extensions, but does not
link to libXext, which makes gold unhappy.
Based on a patch by: Xan Lopez <xan@gnome.org>
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
It should be possible render a single PangoLayout with different
colors without recalculating the layout. This was not working because
the color used at the first edit was being stored in the display
list. This broke changing the opacity on a ClutterText.
Now each node in the display list has a 'color override' flag which
marks whether it should use the base color or not. The base color is
now passed in from _cogl_pango_display_list_render_texture. The alpha
value is always taken from the base color.
The clutter_redraw() function is used by libraries embedding
Clutter inside another toolkit, instead of queueing a redraw
on the embedded stage. This means that clutter_redraw() should
perform the same sequence of actions done by the redraw idle
callback.
Clutter short-circuits painting when an actor's opacity is
zero. However if the actor is being painted from a ClutterClone then
it will be painted using the clone's opacity instead so the test was
broken.
A merge conflict gone bad: the IMAGE_PC_FILES variable was not appended
to the CLUTTER_REQUIRES one, thus leading to Clutter depending on
GdkPixbuf but never actually checking for it.
* 1.0-integration: (138 commits)
[x11] Disable XInput by default
[xinput] Invert the XI extension version check
[cogl-primitives] Fix an unused variable warning when building GLES
[clutter-stage-egl] Pass -1,-1 to clutter_stage_x11_fix_window_size
Update the GLES backend to have the layer filters in the material
[gles/cogl-shader] Add a missing semicolon
[cogl] Move the texture filters to be a property of the material layer
[text] Fix Pango unit to pixels conversion
[actor] Force unrealization on destroy only for non-toplevels
[x11] Rework map/unmap and resizing
[xinput] Check for the XInput entry points
[units] Validate units against the ParamSpec
[actor] Add the ::allocation-changed signal
[actor] Use flags to control allocations
[units] Rework Units into logical distance value
Remove a stray g_value_get_int()
Remove usage of Units and macros
[cogl-material] Allow setting a layer with an invalid texture handle
[timeline] Remove the concept of frames from timelines
[gles/cogl-shader] Fix parameter spec for cogl_shader_get_info_log
...
Conflicts:
configure.ac
The XInput support in Clutter is still using XI 1.x. This will never
work correctly, and we are all waiting for XInput 2 anyway. The changes
internally should be minimal, so we can leave everything in place, but
it's better to disable XInput support by default -- at least for the
time being.
