It wasn't implemented by any subclass, it's not provided by DRM either.
And even if a subclass were to have only a file available, it could read
it into a GBytes as well and just use `read_edid()`.
Found this while working on !269.
Because it is implemented and always on. By advertising this fact
the master clock is able to sync to the native refresh rate instead
of always using the fallback of 60.00Hz.
https://bugzilla.gnome.org/show_bug.cgi?id=781296
Add support for getting hardware presentation times from KMS (Wayland
sessions). Also implement cogl_get_clock_time which is required to compare
and judge the age of presentation timestamps.
For single monitor systems this is straightforward. For multi-monitor
systems though we have to choose a display to sync to. The compositor
already partially solves this for us in the case of only one display
updating because it will only use the subset of monitors that are
changing. In the case of multiple monitors consuming the same frame
concurrently however, we choose the fastest one (in use at the time).
Note however that we also need !73 to land in order to fully realize
multiple monitors running at full speed.
Use cogl_framebuffer_read_pixels_into_bitmap () instead of
glReadPixels () for the CPU copy path in multi-GPU support.
The cogl function employs several tricks to make the read-pixels as fast
as possible and does the y-flip as necessary. This should make the copy
more performant over all kinds of hardware.
This is expected to be used on virtual outputs (e.g. DisplayLink USB
docks and monitors) foremost, where the dumb buffer memory is just
regular system memory. If the dumb buffer memory is somehow slow, like
residing in discrete VRAM or having an unexpected caching mode, it may
be possible for the cogl function perform worse because it might do the
y-flip in-place in the dumb buffer. Hopefully that does not happen in
any practical scenario.
Calling meta_renderer_native_gles3_read_pixels () here was conceptually
wrong to begin with because it was done with the Cogl GL context of the
primary GPU, not on the GL ES 3 context of a secondary GPU. However,
due eglBindAPI being a no-op in Mesa and the glReadPixels () arguments
being compatible, it worked.
This patch adds a pixel format conversion table between DRM and Cogl
formats. It contains more formats than absolutely necessary and the
texture components field which is currently unused for completeness. See
Mutter issue #323. Making the table more complete documents better how
the pixel formats actually map so that posterity should be less likely
to be confused. This table could be shared with
shm_buffer_get_cogl_pixel_format () as well, but not with
meta_wayland_dma_buf_buffer_attach ().
On HP ProBook 4520s laptop (Mesa DRI Intel(R) Ironlake Mobile, Mesa
18.0.5), without this patch copy_shared_framebuffer_cpu () for a
DisplayLink output takes 5 seconds with a 1080p frame. Obviously that
makes Mutter and gnome-shell completely unusable. With this patch, that
function takes 13-18 ms which makes it usable if not fluent.
On Intel i7-4790 (Mesa DRI Intel(R) Haswell Desktop) machine, this patch
makes no significant difference (the copy takes 4-5 ms).
The format will be needed in a following commit in the CPU copy path
which stops hardcoding another format and starts using the format the
dumb FB was created with.
Change the callers of init_dumb_fb () to use DRM format codes. DRM and
GBM format codes are identical, but since this is about dumb buffers,
DRM formats fit better.
The header /usr/include/gbm.h installed by Mesa says:
* The FourCC format codes are taken from the drm_fourcc.h definition, and
* re-namespaced. New GBM formats must not be added, unless they are
* identical ports from drm_fourcc.
That refers to the GBM_FORMAT_* codes.
Virtual keyboard and pointer are freed on session close, but the
virtual touchscreen isn't.
Avoid a leak by freeing the virtual touchscreen along with the rest of
virtual devices.
We were using the connector_id for the winsys_id, but different
devices could have connectors with the same id. Since we use
winsys_id to uniquely identify outputs, use both the connector
id and the device id to avoid having outputs with the same id.
Python is not guaranteed to be installed in /usr/bin. This is especially
true for *BSD systems which don't consider Python as an integral part of
their systems.
Don't schedule redraws when being headless; there is nothing to draw so
don't attempt to draw. This also makes a flaky test become non-flaky, as
it previously spuriously got warnings due to windows being "painted"
when headless but lacking frame timings, as nothing was actually
painted.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/170
The empty MetaStage was in meta-stage-private.h for no reason, so lets
move it to the C file. This makes it pointless to have a private
instance struct, so just move the fields to the private struct
_MetaStage.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/170
While leaving the runtime checks in place, requiring xrandr 1.5 at build
time allows us to remove some seemingly unnecessary conditional
inclusion of functionality.
The order and way include macros were structured was chaotic, with no
real common thread between files. Try to tidy up the mess with some
common scheme, to make things look less messy.
drmModePageFlip() is guaranteed to fail for the invalid FB id 0.
Therefore it never makes sense to call this function with such argument.
Disabling a CRTC must be done with SetCrtc instead, for example.
Trying to flip to FB 0 not only fails, but it also causes Mutter to
never try page flip on this output again, using drmModeSetCrtc()
instead.
There was a race in setting next_fb_id when a secondary GPU was using
the CPU copy path. Losing this race caused the attempt to
drmModePageFlip () to FB ID 0 which is invalid and always fails. Failing
to flip causes Mutter to fall back to drmModeSetCrtc () permanently.
In meta_onscreen_native_swap_buffers_with_damage ():
- update_secondary_gpu_state_pre_swap_buffers ()
- copy_shared_framebuffer_cpu () but only on the CPU copy path
- secondary_gpu_state->gbm.next_fb_id is set
- wait_for_pending_flips ()
- Waits for any remaining page flip events and executes and destroys
the related page flip closures.
- on_crtc_flipped ()
- meta_onscreen_native_swap_drm_fb ()
- swap_secondary_drm_fb ()
- secondary_gpu_state->gbm.next_fb_id = 0;
- meta_onscreen_native_flip_crtcs ()
- meta_onscreen_native_flip_crtc ()
- meta_gpu_kms_flip_crtc () gets called with fb_id = 0
This race was observed lost when running 'mutter --wayland' on a machine
with two outputs on Intel and one output on DisplayLink USB dock, and
wiggling around a weston-terminal window between the Intel and
DisplayLink outputs. It took from a second to a minute to trigger. For
testing with DisplayLink outputs Mutter also needed a patch to take the
DisplayLink output into use, as it would have otherwise been ignored
being a platform device rather than a PCI device.
Fix this race by first waiting for pending flips and only then
proceeding with the swap operations. This should be safe, because the
pending flips could have completed already before entering
meta_onscreen_native_swap_buffers_with_damage ().
When constructing MetaMonitorsConfig objects, store which type
of switch_config they are for (or UNKNOWN if it is not such
type of config).
Stop unconditionally setting current_switch_config to UNKNOWN when
handling monitors changed events. Instead, set it to the switch_config
type stored in the MonitorsConfig in the codepath that updates logical
state. In addition to being called in the hotplug case along the same
code flow that generates monitors changed events, this is also called
in the coldplug case where a secondary monitor was connected before
mutter was started.
When creating the default linear display config, create it as a
switch_config so that internal state gets updated to represent
linear mode when this config is used.
The previous behaviour of unconditionally resetting current_switch_config
to UNKNOWN was breaking the internal state machine for display config
switching, causing misbehaviour in gnome-shell's switchMonitor UI when
using display switch hotkeys. The lack of internal tracking when the
displays are already in the default "Join Displays" linear mode was
then causing the first display switch hotkey press to do nothing
(it would attempt to select "Join Displays" mode, but that was already
active).
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/281https://gitlab.gnome.org/GNOME/mutter/merge_requests/213
meta_renderer_native_gles3_read_pixels() was assuming that the target
buffer stride == width * 4. This is not generally true. When a DRM
driver allocates a dumb buffer, it is free to choose a stride so that
the buffer can actually work on the hardware.
Record the driver chosen stride in MetaDumbBuffer, and use it in the CPU
copy path. This should fix any possible stride issues in
meta_renderer_native_gles3_read_pixels().
Track the allocated dumb buffer size in MetaDumbBuffer. Assert that the
size is as expected in copy_shared_framebuffer_cpu().
This is just to ensure that Cogl and the real size match. The size from
Cogl was used in the copy, so getting that wrong might have written
beyond the allocation.
This is a safety measure and has not been observed to happen yet.
If drmModeAddFB2() does not work, the fallback to drmModeAddFB() can
only handle a single specific format. Make sure the requested format is
that one format, and fail the operation otherwise.
This should at least makes the failure mode obvious on such old systems
where the kernel does not support AddFB2, rather than producing wrong
colors.
Previously, trackballs were detected based on the presence of the
substring "trackball" in the device name. This had the downside of
missing devices, such as the Kensington Expert Mouse, which don't have
"trackball" in their names.
Rather than depending on the device name, use the ID_INPUT_TRACKBALL
property from udev to determine whether or not to treat a device as a
trackball.
This adds a new function, `is_trackball_device`, to MetaInputEvents, and
eliminates the `meta_input_device_is_trackball` function.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/258
The "backends: Move MetaOutput::crtc field into private struct"
accidentally changed the view transform calculation code to assume that
"MetaCrtc::transform" corresponds to the transform of the CRTC; so is
not the case yet; one must calculate the transform from the logical
monitor, and check whether it is supported by the CRTC using
meta_monitor_manager_is_transform_handled(). This commit restores the
old behaviour that doesn't use MetaCrtc::transform when calculating the
view transform.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/216
We need a way for mutter to exit if no available GPUs are going to work.
For example if gdm starts gnome-shell and we're using a DRM driver that
doesn't work with KMS then we should exit so that GDM can try with Xorg,
rather than operating in headless mode.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/223
meta_backend_x11_grab_device is performing X server clock comparison
using the MAX macro, which comes down to a simple greater-than.
Use XSERVER_TIME_IS_BEFORE, which is a better macro for X server
clock comparisons, as it accounts for 32-bit wrap-around.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/174
Commit c0d9b08ef9 replaced the old GBM API calls
with the multi-plane GBM API. However, the call to gbm_bo_get_handle_for_plane
fails for some DRI drivers (in particular i915). Due to missing error checks,
the subsequent call to drmModeAddFB[2] fails and the screen output locks up.
This commit adds the missing error checks and falls back to the old GBM API
(non-planar) if necessary.
v5: test success of gbm_bo_get_handle_for_plane instead of errno
This commit adopts solution proposed by Daniel van Vugt to check the return
value of gbm_bo_get_handle_for_plane on plane 0 and fall back to old
non-planar method if the call fails. This removes the errno check (for
ENOSYS) that could abort if mesa ever sets a different value.
Related to: https://gitlab.gnome.org/GNOME/mutter/issues/127
The function is intentionally provided as macro to not require a
cast. Recently the macro was improved to check that the passed in
pointer matches the free function, so the cast to GDestroyNotify
is now even harmful.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/176
For historical reasons meta_monitor_is_active() checked whether it is
active by checking whether the main output have a CRTC assigned and
whether that CRTC has a current mode. At a later point, the MetaMonitor
got its own mode abstraction (MetaMonitorMode), but
meta_monitor_is_active() was never updated to use this.
An issue with checking the main output's CRTC state is that, if there is
some CRTC mode combination that for some reason isn't properly detected
by the MetaMonitorMode abstraction (e.g. some tiling configuration not
yet handled), meta_monitor_is_active() would return TRUE, even though no
(abstracted) mode was set. This would cause confusion here and there,
leading to NULL pointer dereferences due to the assumption that if a
monitor is active, it has an active mode.
Instead, change meta_monitor_is_active() to directly check the current
monitor mode, and log a warning if the main output still happen to have
a CRTC with a mode assigned to it. This way, when an not undrestood CRTC
mode combination is encountered, instead of dereferencing NULL pointers,
simply assume the monitor is not active, which means that it will not be
managed or rendered by mutter at all.
https://gitlab.gnome.org/GNOME/mutter/issues/130
Avoid exporting through org.gnome.Mutter.DisplayConfig.GetCurrentState
excessively-low screen resolutions setting both a minimum width and a minimum
height. GetCurrentState is e.g. used by Gnome Control Center to build a list of
selectable resolutions.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=793223
If drmModeSetCrtc() is called with no fb, mode or connectors for some
CRTC it may still fail, and we should handle that gracefully instead of
assuming it failed to set a non-disabled state.
Closes https://gitlab.gnome.org/GNOME/mutter/issues/70
Add API to let GNOME Shell have the ability to get notified about remote
access sessions (remote desktop, remote control and screen cast), and
with a way to close them.
This is done by adding an abstraction above the remote desktop and
screen cast session objects, to avoid exposing their objects to outside
of mutter. Doing that would result in external parts holding references
to the objects, complicating their lifetimes. By using separate wrapper
objects, we avoid this issue all together.
Monitor whether UPower is running ourselves. That allows us to keep the
same value for "lid-is-closed" throughout the process of UPower
restarting, preventing unwanted monitor re-configuration through the process.
Fixes another screen black out when UPower restarts and the laptop lid
is closed.
Rather than handle UpClient in both MetaBackend (to reset the idletime
when the lid is opened), and in MetaMonitorManager and
MetaMonitorConfigManager (to turn the screen under the lid on/off
depending on its status), move the ability to get the lid status from
UPower or mock it in one place, in MetaBackend.
Restarting UPower will make every property of UpClient emit a "notify"
signal (as a GDBusProxy would). Avoid mutter reconfiguring the displays
when upower restarts by caching the last known value of "lid-is-closed"
and only reconfiguring the displays if it actually changed.
This fixes a black out of the screen when UPower restarts.
The framerate for screen cast sources was set to variable within 1 FPS
and the framerate of the monitor being screen casted. This meant that if
the sink didn't match the framerate (e.g. had a lower max framerate),
the formats would not match and a stream would not be established.
Allow letting the sink clamp the framerate range by setting it as
'unset', allowing it to be negotiated.
The PipeWire master branch saw some backports from the work branch,
including API changes making the 0.1 series more aligned with future
plans. Make mutter use the new API. This is needed to avoid dead locks
that existed in the older version.
Force update the cursor renderer after theme or size changes; otherwise
we'll be stuck with the old theme and/or size until something else
triggers resetting of the cursor.
- Stop using CurrentTime, introduce META_CURRENT_TIME
- Use g_get_monotonic_time () instead of relying on an
X server running and making roundtrip to it
https://bugzilla.gnome.org/show_bug.cgi?id=759538
They are X11 specific functions, used for X11 code. They have been
improved per jadahl's suggestion to use gdk_x11_lookup_xdisplay and
gdk_x11_display_error_trap_* functions, instead of current code.
https://bugzilla.gnome.org/show_bug.cgi?id=759538
- Moved xdisplay, name and various atoms from MetaDisplay
- Moved xroot, screen_name, default_depth and default_xvisual
from MetaScreen
- Moved some X11 specific functions from screen.c and display.c
to meta-x11-display.c
https://bugzilla.gnome.org/show_bug.cgi?id=759538
Make it so that each logical monitor has a reference to all the
monitors that are assigned to it.
All monitors has a reference to each output that belongs to it.
Each output has a reference to any CRTC it has been assigned.
https://bugzilla.gnome.org/show_bug.cgi?id=786929
For some reason "backends: Remove X11 idle-monitor backend" removed
unrelated warning messages for when generated monitor configurations
that should work didn't, which also made the unit tests fail.
This commit adds them back, which also makes the tests pass again.
Commit 712ec30cd9 added the logic to only
choose EGL configs that match the GBM_FORMAT_XRGB8888 pixel format.
However, there won't be any EGL config satisfying such criteria for
non-GBM backends, such as EGLDevice.
This change will let us choose the first EGL config for the EGLDevice
backend, while still forcing GBM_FORMAT_XRGB8888 configs for the GBM
one.
Related to: https://gitlab.gnome.org/GNOME/mutter/issues/2
Where to realize a hardware cursor depends on where on the screen it
will be displayed. For example it only needs buffers for the cursor
plane on a certain GPU if it overlaps with a monitor that is connected
said GPU.
Previously, we were too eager with uploading the cursor plane buffers,
which in effect resulted in the secondary GPU always being woken up
when changing the cursor, even though the cursor plane would actually
never be set unless the pointer cursor was moved to a monitor connected
to the secondary GPU. These wake-ups caused noticable stuttering; thus
by uploading the buffers more lazilly, the stuttering is avoided.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/77
When a cursor is hidden, the native backend will properly hide the HW
cursor sprite as well, but it would communicate this as if the cursor
was not handled by the backend, while in fact it still was. This caused
the generic cursor rendering layer to queue a redraw.
https://gitlab.gnome.org/GNOME/mutter/issues/77
When force-updating the HW state we might end up with a situation where
the HW cursor is no longer usable. If this would happen, we'd before
this commit not trigger the fallback paths using a GL texture.
https://gitlab.gnome.org/GNOME/mutter/issues/77
It is already handled by the monitor-updated-internal signal handler in
meta-cursor-renderer-native.c, which will always be called indirectly
by resuming the monitor manager.
While at it, remove a useless comment.
https://gitlab.gnome.org/GNOME/mutter/issues/77
Call it meta_cursor_renderer_update_cursor. This avoids confusing it
with the update_cursor MetaCursorRendererClass vfunc when navigating
the file.
https://gitlab.gnome.org/GNOME/mutter/issues/77
It knows better when it's needed. For now, just do it just as before,
before drawing. Eventually, we can conditionalize where to realize
depending on the cursor sprite position.
https://gitlab.gnome.org/GNOME/mutter/issues/77
Use a common entry point into the cursor renderer implementations HW
cursor realization paths for all cursor sprite types. This is in
preparation for realizing at more strategic times.
https://gitlab.gnome.org/GNOME/mutter/issues/77
The end goal here is to being able to realize at any point in time
through a single API, so start by moving state into the cursor sprite
implementation.
https://gitlab.gnome.org/GNOME/mutter/issues/77
Remove some X11 compositing manager specific code from the general
purpose cursor tracker into a new MetaCursorSprite based special
purpose XFIXES cursor sprite.
https://gitlab.gnome.org/GNOME/mutter/issues/77
Introduce a new type MetaCursorSpriteXcursor that is a MetaCursorSprite
implementation backed by Xcursor images. A plain MetaCursorSprite can
still be created "bare bone", but must be manually provided with a
texture. These usages will eventually be wrapped into new
MetaCursorSprite types while turning MetaCursorSprite into an abstract
type.
https://gitlab.gnome.org/GNOME/mutter/issues/77
It was prefixed with meta_cursor_, but it took a X11 Display, so update
the naming. Eventually it should be duplicated depending if it's a
frontend X11 connection call or a backend X11 connection call and moved
to the corresponding layers, but let's just do this minor cleanup for
now.
https://gitlab.gnome.org/GNOME/mutter/issues/77
This makes it possible to move out backing store specific code (such as
Xcursor handling) to separate units, while also making it easier to add
more types).
https://gitlab.gnome.org/GNOME/mutter/issues/77
drmModeAddFB2 allows userspace to specify a real format enum on
non-ancient kernels, as an improvement over the legacy drmModeAddFB
which derives format from a fixed depth/bpp mapping.
As an optimisation, Weston used to decide at the first failure of
drmModeAddFB2 that the ioctl was unavailable: as non-existent DRM
ioctls return -EINVAL rather than -ENOSYS or similar, bad parameters are
not distinguishable from the ioctl not being present.
Mutter has also implemented the same optimisation for dumb framebuffers,
which potentially papers over errors for the gain of avoiding one ioctl
which will rapidly fail on ancient kernels. Remove the optimisation and
always use AddFB2 where possible.
Closes: #14
When using the EGLStream backend, the MetaRendererNative passed a
GClosure to KMS when using EGLStreams, but KMS flip callback event
handler in meta-gpu-kms.c expected a closure wrapped in a closure
container, meaning it'd instead crash when using EGLStreams. Make the
flip handler get what it expects also when using EGLStreams by wrapping
the flip closure in the container before handing it over to EGL.
https://bugzilla.gnome.org/show_bug.cgi?id=790316
While MetaStage, MetaWindowGroup and MetaDBusDisplayConfigSkeleton don't
appear explicitly in the public API, their gtypes are still exposed via
meta_get_stage_for_screen(), meta_get_*window_group_for_screen() and
MetaMonitorManager's parent type. Newer versions of gjs will warn about
undefined properties if it encounters a gtype without introspection
information, so expose those types to shut up the warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
Various code assumed PipeWire function calls would never fail. Some can
actually fail for real reasons, and some currently can only fail due to
OOM situations, but we should still not assume that will always be the
case.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/102
Before we just set it to "none", but this was not enough since various
calls will depend on not just the context being active, but the main
rendering surface.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/21
When deriving the global scale directly from the current hardware state
(as done when using the X11 backend) we are inspecting the logical
state they had prior to the most recent hot plug. That means that a
primary monitor might have been disabled, and a new primary monitor may
not have been assigned yet.
Stop assuming a primary monitor has an active mode before having
reconstructed the logical state by finding some active monitor if the
old primary monitor was disabled. This avoids a crash when trying to
derive the global scale from a disabled monitor.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/130
As a follow up to the patch from a95cbd0a, we need to make sure
that the pointer is out of the way as well when monitors changed,
since that's the event that will prevail in some cases. Besides,
this is also consistent with what the code before a95cbd0a was,
which initialized the pointer position in the same way both in
this case and in the real_post_init() function.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/157
Centering the pointer at startup causes undesired behaviour if
it ends up hovering over reactive elements, that might react
to that positioning, causing confusion. This is the case of
the login dialog when a list of different users is shown, as
centering the pointer at startup in that case will get the
user in the center of the screen pre-selected, which is not
the expected behaviour (i.e. pre-selecting the first one).
Fix this by simply moving the pointer out of the way, close
to the bottom-right corner, during initialization.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/157
This is a small mistake spotted while working on a solution
for #77. When a GPU fails to initialize, we're adding them
anyway, which might have pretty bad consequences when trying
to use these NULL GPUs.
Issue: #77
Make it re-enable:able by a hidden "experimental feature". To enable, add
"kms-modifiers" to the org.gnome.mutter.experimental-features GSettings entry.
The ResetIdletime API can be used instead of an "XTest" binary to
programmatically reset the idle time, as if the user pressed a button on
a keyboard.
This is necessary since we stopped using the XSync extension to monitor
idletimes, as it didn't consider inhibitors as busy, and mutter's
clutter code ignores "Core Events" as generated by XTest.
This patch will require minimal changes to gnome-settings-daemon's power
test suite so that "key press" idletime resets are triggered through
this D-Bus interface rather than through XTest and a roundtrip through
the X server.
https://bugzilla.gnome.org/show_bug.cgi?id=705942
Take idle inhibitions into account for when to fire idle watches as
requested by OS components.
This should stop gnome-session and gnome-settings-daemon considering
the session idle when they have been inhibited for longer than their
timeout, for example to avoid the screensaver activating, or the
computer suspending after watching a film.
https://bugzilla.gnome.org/show_bug.cgi?id=705942
Now that we've removed the X11 specific backend of the idle monitor,
add back a cut-down version of it for the explicit purpose of being
told about idle time resets when XTest events are used.
XTest events are usually used by test suites and remote display software
to inject events into an X11 session. We should consider somebody moving
the mouse remotely to be just as "active" as somebody moving it locally.
https://bugzilla.gnome.org/show_bug.cgi?id=705942
And use the old "native" backend for both X11 and Wayland. This will
allow us to share fixes between implementations without having to delve
into the XSync X11 extension code.
https://bugzilla.gnome.org/show_bug.cgi?id=705942
Output ID is set equal to 'i' later in the loop. But 'i' was never
incremented, so all outputs were getting the same ID (equal to
the number of CRTCs, because 'i' was reused from the previous loop).
(cherry picked from commit 23c3f8bb18)
If we attempt GBM surface allocation with a set of modifiers but the
allocation fails, fall back to non-modifier allocations. This fixes
startup on Pineview-based Atom systems, where KMS provides us a set of
modifiers but the GBM implementation doesn't support modifier use.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/84
Rotating an output would show duplicate cursors when the pointer is
located over an area which would be within the output if not rotated.
Make sure to swap the width/height of the output when rotated.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/85
Rendering the next frame (which mostly happens as part of the flush done
in swap buffers) is a task that the GPU can complete independently of
the CPU having to wait for previous page flips. So reverse their order
to get the GPU started earlier, with the aim of greater GPU-CPU
parallelism.
When using two monitors size by side with different scales, once the
cursor moves from one output to another one, its size changes based on
the scale of the given output.
Changing the size of the cursor can cause the cursor area to change
output again if the hotspot is not exactly at the top left corner of the
area, causing the texture of the cursor to change, which will trigger
another output change, so on and so forth causing continuous surface
enter/leave event which flood the clients and eventually kill them.
Change the logic to use only the actual cursor position to determine if
its on the given logical monitor, so that it remains immune to scale
changes induced by output scale differences.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/83
We just arbitrarily chose the first EGL config matching the passed
attributes, but we then assumed we always got GBM_FORMAT_XRGB8888. That
was not a correct assumption. Instead, make sure we always pick the
format we expect.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/2
In order to let applications gracefully handle version mismatches, add
a version property to the APIs. Also add a warning on the APIs that
these are not meant for public consumption.
If the coordinates was for a stream not at the stage position (0, 0),
they'd be incorrect. Fix this by correctly translating the coordinates
according to the stream position.
When the buffer modifier is DRM_FORMAT_MOD_LINEAR, we can use the
old code path. That means not specifying any modifier parameter.
It was an issue when the primary GPU was creating a linear GBM surface
and that a secondary GPU (not supporting modifiers) was trying to
import it. It was failing because the driver could not use the
import_modifiers extension even though it could in theory easily
import the buffer.
https://gitlab.gnome.org/GNOME/mutter/issues/18
We were retrieving the supported KMS modifiers for all GPUs even
though what we really need to intersect between these sets of
modifiers:
1) KMS supported modifiers for primary GPU if the GPU is used for
scanout;
2) EGL supported modifiers for secondary GPUs (different than the
primary GPU used for rendering);
3) GBM supported modifiers when creating the surface (already
taken care of by gbm_surface_create_with_modifiers());
https://gitlab.gnome.org/GNOME/mutter/issues/18
So the changes can be instantly applied while the tool is in proximity.
Before we would just do it on proximity-in, which doesn't provide a
good look&feel while modifying the tool settings in g-c-c.
https://gitlab.gnome.org/GNOME/mutter/issues/38Closes: #38
The property has been 32 bits since around 2011 and has not changed, mutter
expects it to be 8 bits. The mismatch causes change_property to never
actually change the property.
https://gitlab.gnome.org/GNOME/mutter/issues/26Closes: #26
This was done by the clutter X11 backend before prior to introducing
MetaRenderer, but during that work, enabling of said extension was lost.
Let's turn it on again.
https://bugzilla.gnome.org/show_bug.cgi?id=739178
There seems to be a kernel race when one disconnects an external
monitor connected to a DisplayPort via a USB-C adapter. The race
results in a connector being reported as connected, but without any
modes supported.
This had the side effect that we tried to set a preferred mode to
the first listed mode, but as no modes were available, we instead tried
to dereference the first element of a NULL array, causing a
segmentation fault.
Mitigate this by skipping adding output if no supported modes are
advertised and the output doesn't support scaling, while moving the
fallback path for calculating a preferred output mode to after possibly
adding the common modes, to avoid the unvolentary NULL dereference.
https://bugzilla.gnome.org/show_bug.cgi?id=789501
Opening and closing the device may result into XI2 grabs being cut short,
resulting into pad buttons being rendered ineffective, and other possible
misbehaviors. This is an XInput flaw that fell in the gap between XI1 and
XI2, and has no easy fix. It pays us for mixing both versions, I guess...
Work this around by keeping the XI1 XDevice attached to the
ClutterInputDevice, this way it will live long enough that this is not
a concern.
Investigation of this bug was mostly carried by Peter Hutterer, I'm just
the executing hand.
https://gitlab.gnome.org/GNOME/mutter/issues/7Closes: #7
A comparison in translate_device_event() does not account for the fact
that X's clock wraps about every 49.7 days. When triggered, this causes
an unresponsive GUI.
Replace simple less-than comparison with XSERVER_TIME_IS_BEFORE macro,
which accounts for the wrapping of X's clock.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/12
The tertiary-button-action (see bug 790028) is a place for g-c-c to store
the action which should be performed when a stylus' third button is pressed.
Pressing this button is signaled as a BTN_STYLUS3 event from the kernel or
X11 button 8.
https://bugzilla.gnome.org/show_bug.cgi?id=790033
Now that we have the list of supported modifiers from the monitor
manager (via the CRTCs to the primary planes), we can use this to inform
EGL it can use those modifiers to allocate the GBM surface with. Doing
so allows us to use tiling and compression for our scanout surfaces.
This requires the Mesa commit in:
Mesa 10.3 (08264e5dad4df448e7718e782ad9077902089a07) or
Mesa 10.2.7 (55d28925e6109a4afd61f109e845a8a51bd17652).
Otherwise Mesa closes the fd behind our back and re-importing will fail.
See FDO bug #76188 for details.
https://bugzilla.gnome.org/show_bug.cgi?id=785779
Newer versions of GBM support buffer modifiers, including multi-plane
buffers. Use this new API to explicitly pull the information from GBM,
and feed it to drmModeAddFB2WithModifiers.
https://bugzilla.gnome.org/show_bug.cgi?id=785779
The KMS IN_FORMATS blob property contains a structure defining which
format/modifier combinations are supported for each plane. Use this to
extract a list of acceptable modifiers to use for the primary plane for
XRGB8888, so we can ask EGL to allocate tiled/compressed buffers for
scanout when available.
https://bugzilla.gnome.org/show_bug.cgi?id=785779
Using 800x600 as minimum logical size is very 4:3 thinking, while a lot of
modern devices are 16:9. The specific reason for this commit is to allow
1.5 scaling at mini-laptops (clamshell devices) with e.g. a 5.5"
1280x720 screen. Given that this device has a keyboard, one obviously
is not holding it very close to ones eyes and at 220 dpi that means the text
is too small at scale 1.0. For one real world example of such a device see:
https://en.wikipedia.org/wiki/GPD_Winhttps://bugzilla.gnome.org/show_bug.cgi?id=792765
The device orientation coming out of iio-sensor-proxy defines upright/normal
as the direction in which the picture is displayed on the LCD panel without
any rotation. This is necessary for accelerometer rotation to work properly
in desktop environments which are not aware of panel-orientation issues.
This means that we need to correct the logical-monitor-config / user-visible
rotation for the panel-orientation when we get rotation info from
iio-sensor-proxy.
https://bugzilla.gnome.org/show_bug.cgi?id=782294
Just like we swap the x and y resolution of the monitor modes when
the panel-orientation requires 90 or 270 degree rotation to compensate,
we should do the same for the width and height in mm of the monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=782294
If a monitor's max resolution is a portrait resolution, then assume it is
a native portrait monitor and add portrait versions of the common modes.
https://bugzilla.gnome.org/show_bug.cgi?id=782294
Even if the logical_monitor config does not have an active transform,
we might still be doing a transform under the hood to compensate for
panel-orientation. Check for this and fall back to the sw cursor if this
is the case.
https://bugzilla.gnome.org/show_bug.cgi?id=782294
If a LCD panel has a non normal orientation (mounted upside-down or 90
degrees rotated) then the kernel will report touchscreen coordinates with
the origin matching the native (e.g. upside down) coordinates of the panel.
Since we transparently rotate the image on the panel to correct for the
non normal panel-orientation, we must apply the same transform to input
coordinates to keep the aligned.
https://bugzilla.gnome.org/show_bug.cgi?id=782294
Some x86 clamshell design devices use portrait tablet LCD panels while
they should use a landscape panel, resoluting in a 90 degree rotated
picture.
Newer kernels detect this and rotate the fb console in software to
compensate. These kernels also export their knowledge of the LCD panel
orientation vs the casing in a "panel orientation" drm_connector property.
This commit adds support to mutter for reading the "panel orientation"
and transparently (from a mutter consumer's pov) fixing this by applying
a (hidden) rotation transform to compensate for the panel orientation.
Related: https://bugs.freedesktop.org/show_bug.cgi?id=94894https://bugzilla.gnome.org/show_bug.cgi?id=782294
We only counted configured monitors and whether the config was
applicable (could be assigned), howeverwe didn't include disabled
monitors when comparing. This could caused incorrect configurations to
be applied when trying to use the previous configuration.
One scenario where this happened was one a system with one laptop
screen and one external monitor that was hot plugged some point after
start up. When the laptop lid was closed, the 'previous configuration'
being the configuration where only the laptop panel was enabled, passed
'is-complete' check as the number of configured monitors were correct,
and the configuration was applicable.
Avoid this issue by simply comparing the configuration key of the
previous configuration and the configuration key of the current state.
This correctly identifies a laptop panel with the lid closed as
inaccessible, thus doesn't incorrectly revert to the previous
configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=788915
When deriving the list of disabled monitors when creating new monitors
configs, don't include the laptop panel if the lid is currently closed,
as we consider the laptop panel nonexistent when the laptop lid is
closed when it comes to configuration.
The laptop panel connector(s) will either way be appropriately disabled
anyway, as the field listing disabled monitors in the configuration do
not affect actual CRTC/connector assignments.
https://bugzilla.gnome.org/show_bug.cgi?id=788915
Commit b1a0bf891 broke the previous logic that we would only fallback
to the root cursor if 1) windows are not interactable or 2) no window
cursor is currently set (i.e. not hovering over any window). Now it
will set up the root cursor if it's NULL, which breaks clients
explicitly setting an invisible cursor. This commit restaurates the
previous behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=754806
This function is supposedly not failable, so just move the theme_dirty
flag clearing to the beginning of the function. Protects against cases
where requesting a cursor image may result in it being loaded and set
as a texture, which emits ::texture-changed, which may end up requesting
the cursor image again.
https://bugzilla.gnome.org/show_bug.cgi?id=754806
As wayland implements the cursor role, it consists of a persistent
MetaCursorSprite that gets the backing texture changed. This is
inconvenient for the places using MetaCursorTracker to track cursor
changes, as they actually track MetaCursorSprites.
This signal will be used to trigger emission of
MetaCursorTracker::cursor-changed, which will make users able to
update accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=754806
Just like X11/XFixes behaves, the current cursor is not affected
by its visibility, so it can be queried while invisible (possibly
to be replaced).
For this, keep an extra effective_cursor pointer that will be
either equal to displayed_cursor (maybe a bit of a misnomer now)
or NULL if the cursor is invisible. The MetaCursorRenderer
management is tied to the former, and the ::cursor-changed signal
emission to the latter.
https://bugzilla.gnome.org/show_bug.cgi?id=754806
We must emit ::dnd-leave to pair the ::dnd-enter that shall be
emitted whenever the plugin grab begins, otherwise we leave
listeners unable to clean up if the plugin begins and ends a
grab while there is an ongoing DnD operation.
https://bugzilla.gnome.org/show_bug.cgi?id=784545
Proprietary drivers such as ARM Mali export EGL_KHR_platform_gbm instead
of EGL_MESA_platform_gbm. As such, GBM platform check should be done for
both MESA and non-MESA drivers.
https://bugzilla.gnome.org/show_bug.cgi?id=780668
Bluetooth mouse usually goes in sleep state after a timeout, when that
happen the mouse is disconnected and on_device_removed function is
called. Before the patch if a touch device is available the
on_device_removed function hide the cursor. The issue is that the cursor
does not reappear once the bluetooth mouse is reconnected because
MetaBackend::current_device_id is not invalidated when on_device_removed
was called.
The patch set MetaBackend::current_device_id to 0 if the current device
is removed. This will make update_last_device to be triggered as soon as
another input device is used or the bluetooth mouse reconnect, as
consequence that the cursor reappear. The id 0 is never given to devices
and can safely used as undefine id.
https://bugzilla.gnome.org/show_bug.cgi?id=761067
The DRM properties container must be destroyed with
drmModeFreeObjectProperties, and the connectors must be freed on every
caller. Also make it sure that gbm_device structs are destroyed with the
MetaRendererNativeGpuData that owns them.
https://bugzilla.gnome.org/show_bug.cgi?id=789984
On some architectures, including both GLES3/gl3.h GL/gl.h will cause
compilation issues due to incompatible type definitions. To avoid
running into that issue while building on other architectures, make
sure we haven't included GL/gl.h by accident.
https://bugzilla.gnome.org/show_bug.cgi?id=788695
The org.gnome.desktop.peripherals.trackball.scroll-wheel-emulation-button
setting contains buttons X11-style. Work out the BTN evcode that applies
to it when applying the setting on the libinput device.
https://bugzilla.gnome.org/show_bug.cgi?id=787804
Check that if there are multiple modes with the same ID (resolution,
refresh rate and handled flags) we correctly add the preferred mode to
the list of monitor modes.
https://bugzilla.gnome.org/show_bug.cgi?id=789153
When generating MetaMonitorMode's, prefer CRTC modes that has the same
set of flags as the preferred mode. This not only is probably a better
set of configurable modes, but it'll guarantee that the preferred mode
is added.
This fixes a crash when the preferred mode was not the first mode with
the same resolution, refresh rate and set of handled modes.
https://bugzilla.gnome.org/show_bug.cgi?id=789153
Under X11 we can only ever have the same scale configured on all
monitors. In order to use e.g. scale 2 when there is a HiDPI monitor
connected, we must not disallow it because there is a monitor that does
not support scale 2. Thus we must show the same scale for every monitor
and monitor mode, even though it might result in a bad experience.
Do this by iterating through all the monitors adding all supported
scales by the preferred mode, combining all the supported scales. This
supported scales list is then used for all monitor and modes no matter
what.
https://bugzilla.gnome.org/show_bug.cgi?id=788901
Adding an internal signal and use it to update the internal state before
emitting "monitors-changed" which will be repeated by the screen to the world.
https://bugzilla.gnome.org/show_bug.cgi?id=788860
Don't use MAX(logical monitor scales) to determine the UI scaling
factor, just use the primary logical monitor. That's where the shell UI
will most likely be.
https://bugzilla.gnome.org/show_bug.cgi?id=788820
On hybrid GPU systems, hardware cursors needs to be realized on all the
GPUs, as scanout cursor planes cannot be shared. Do this by moving gbm
buffer and drm buffer ID management to a per GPU struct, realizing a
cursor on each GPU when previously only realized on the primary GPU.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
A hybrid GPU system is a system where more than one GPU is connected to
connectors. A common configuration is having a integrated GPU (iGPU)
connected to a laptop panel, and a dedicated GPU (dGPU) connected to
one or more external connector (such as HDMI).
This commit adds support for rendering the compositor stage using the
iGPU, then copying the framebuffer content onto a secondary framebuffer
that will be page flipped on the CRTC of the dGPU.
This can work in two different ways: GPU accelerated using Open GL ES
3, or CPU unaccelerated.
When supported, GPU accelerated copying works by exporting the iGPU
onscreen framebuffer as a DMA-BUF, importing it as a texture on a
separate dGPU EGL context, then using glBlitFramebuffer(), blitting it
onto a framebuffer on the dGPU that can then be page flipped on the dGPU
CRTC.
When GPU acceleration is not available, copying works by creating two
dumb buffers, and each frame glReadPixels() from the iGPU EGL render
context directly into the dumb buffer. The dumb buffer is then page
flipped on the dGPU CRTC.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Add helper functions and macros for managing and drawing OpenGL ES 3.
It will be used for blitting framebuffers between multiple GPUs in
hybrid GPU systems.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Eventually, we'll render buffers without using Cogl, and for this we
need to be able to do things like creating, destroying and changing the
context, as well as swapping buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
First find the primary GPU and open it. Then go through all other
discovered GPUs with connectors and add those too. MetaRendererNative
still fails to initialize when multiple added GPUs and
MetaCursorRendererNative still always falls back on OpenGL based cursor
rendering when there are multiple GPUs.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
When creating a renderer with a custom winsys (which is always how
mutter uses cogl) make it possible to pass a user data with the winsys.
Still unused.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Make dumb buffer creation/destruction reusable by introducing a
MetaDumbBuffer type (private to meta-renderer-native.c). This will
later be used for software based fallback paths for copying render GPU
buffers onto secondary GPUs.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
On a CRTC that doesn't report any transforms at all, setting the normal
transform will fail. Avoid failing by checking if any transforms are
supported before applying it, and early out if no transforms are
supported.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Get rid of some technical dept by removing the support in the native
backend for drawing the the whole stage to one large framebuffer.
Previously the only way to disable stage views was to set the
MUTTER_STAGE_VIEWS environment variable to 0; doing that now will cause
the native backend to fail to initialize.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Don't permanently fall back to OpenGL based cursor rendering when
setting the HW cursor fails with EACCES as that may happen on VT
switching and other things temporarily revoking fd access.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
When drmHandleEvent() returns an error and errno is set to EAGAIN,
instead of ending up in a busy loop, poll() the fd until there is
anything to read.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
The prefix, if any, of a variable name often contains information about
the namespace (such as clutter_backend is the ClutterBackend, while
backend is a MetaBackend). Clean up some more inconsistencies in
meta-renderer-native.c where various variable names were egl_ prefixed
but in fact was Cogl types.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
In order to eventually support multilpe GPUs with their own connectors,
split out related meta data management (i.e. outputs, CRTCs and CRTC
modes) into a new MetaGpu GObject.
The Xrandr backend always assumes there is always only a single "GPU" as
the GPU is abstracted by the X server; only the native backend (aside
from the test backend) will eventually see more than one GPU.
The Xrandr backend still moves some management to MetaGpuXrandr, in
order to behave more similarly to the KMS counterparts.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Pass the backend to a new factory function, and keep a pointer to the
monitor manager, which is accessed elsewhere in the same file instead of
fetching the singleton. The HW cursor initialization part is also made
more obvious, without depending on seemingly irrelevant clutter
features.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Move finding, opening and managment of the KMS file descriptor to
MetaMonitorManagerKms. This means that the monitor manager creation can
now fail, both if more than one GPU with connectors is discovered, or
if finding or opening the primary GPU fails.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
The monitor manager instance was created and setup in one step; at
construction. This is problematic if, in the future, the monitor manager
creation can fail, as the monitor manager is created quite late.
To make it possible to in the future fail creating a monitor manager,
create the instance very early when initiating the backend, then on
post init backend setup, "setup" the monitor manager state, i.e. read
the current state and setup the stage.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
The error was printed, then dropped, eventually resulting in another
generic error being printed. Lets just propogate the error all the way
up instead.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Move code dealing with Xrandr MetaCrtcs and related functionality to its
own file. Eventually, MetaCrtcCrtc should be introduced, based on
MetaCrtc, and this commit is in preparation for that.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Move code dealing with X11 MetaOutputs and related functionality to its
own file. Eventually, a MetaOutputXrandr should be introduced, based on
MetaOutput, and this commit is in preparation for that.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Move code dealing with MetaCrtcKms and related functionality to its
own file. Eventually, MetaCrtcKms should become a GObject based on
MetaCrtc, and this commit is in preparation for that.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Instead of passing it around or fetching the singleton, keep a pointer
to the monitor manager that owns the CRTC. This will eventually be
replaced with a per GPU/graphics card object.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Move code dealing with MetaOutputKms and related functionality to its
own file. Eventually, MetaOutputKms should become a GObject based on
MetaOutput, and this commit is in preparation for that.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Instead of passing it around or fetching the singleton, keep a pointer
to the monitor manager that owns the output. This will eventually be
replaced with a per GPU/graphics card object.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Convert MetaCrtcMode from a plain struct to a GObject. This changes the
storage format, and also the API, as the API was dependent on the
storage format.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Turn MetaCrtc into a GObject and move it to a separate file. This
changes the storage format, resulting in changing the API for accessing
MetaCrtcs from using an array, to using a GList.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Add meta_logical_monitor_foreach_crtc() helper to iterate over all the
active CRTCs driving the monitors associated with the specified logical
monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
Turn MetaOutput into a GObject and move it to a separate file. This
changes the storage format, resulting in changing the API for accessing
MetaOutputs from using an array, to using a GList.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
If a configuration key matched a current system state, but no monitor
mode was found (for example because of an incorrect refresh rate),
discard it while logging a warning.
https://bugzilla.gnome.org/show_bug.cgi?id=787668
