Commit Graph

10 Commits

Author SHA1 Message Date
Emmanuele Bassi
d032b9b2bf conform: Start cleaning up the conformance test suite
Re-order the units into a sensible list, with basic tests at the
beginning, and per-class tests at the end - with Cogl last.

Also, start renaming the unit functions from test_<foo> to <foo>,
so that the executable wrappers and the reports have sensible names.
2010-10-12 17:42:18 +01:00
Neil Roberts
9021aa2909 Revert "[timeline] Don't clamp the elapsed time when a looping tl reaches the end"
This reverts commit 9c5663d671.

The patch was causing problems for applications that expect the
elapsed_time to be at either end of the timeline when the completed
signal is fired. For example test-behave swaps the direction of the
timeline in the completed handler but if the time has overflowed the
end then the timeline would only take a short time to get back the
beginning. This caused the animation to just vibrate around the
beginning.
2009-06-11 11:46:41 +01:00
Neil Roberts
6bb5b3a13e [tests] Don't add a newline to the end of g_test_message calls
Two of the timeline tests were calling g_test_message and adding a \n
so the output looked odd.
2009-06-11 11:38:49 +01:00
Neil Roberts
9c5663d671 [timeline] Don't clamp the elapsed time when a looping tl reaches the end
The new-frame signal of a timeline was previously guaranteed to be
emitted with the elapsed_time set to the end before it emits the
completed signal. This doesn't necessarily make sense for looping
timelines because it would cause the elapsed time to be clamped to a
slightly off value whenever the timeline restarts. This patch makes it
perform the wrap around before emitting the new-frame signal so that
the elapsed time always corresponds to the time elapsed since the
timeline was started.

Additionally it no longer fudges the msecs_delta property to make the
marker check work so clutter_timeline_get_delta will always return the
wall clock time since the last frame.
2009-06-10 17:47:33 +01:00
Owen W. Taylor
287d4f76ec Remove useless manual timeline ticking
The master clock now works fine whether or not there are any stages,
so in the timeline conformance tests don't need to set up their
own times.

Set CLUTTER_VBLANK=none for the conformance tests, which in addition
to removing an test-environment dependency, will result in the ticking
for timeline tests being throttled to the default frame rate.

http://bugzilla.openedhand.com/show_bug.cgi?id=1637

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2009-06-09 15:03:56 +01:00
Owen W. Taylor
6705ce6c6a Move elapsed-time calculations into ClutterTimeline
Instead of calculating a delta in the master clock, and passing that
into each timeline, make each timeline individually responsible for
remembering the last time and computing the delta.

This:

 - Fixes a problem where we could spin infinitely processing
   timeline-only frames with < 1msec differences.
 - Makes timelines consistently start timing on the first frame;
   instead of doing different things for the first started timeline
   and other timelines.
 - Improves accuracy of elapsed time computations by avoiding
   accumulating microsecond => millisecond truncation errors.

http://bugzilla.openedhand.com/show_bug.cgi?id=1637

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2009-06-09 15:03:56 +01:00
Neil Roberts
9c7afe0c5b [timeline] Remove the concept of frames from timelines
Timelines no longer work in terms of a frame rate and a number of
frames but instead just have a duration in milliseconds. This better
matches the working of the master clock where if any timelines are
running it will redraw as fast as possible rather than limiting to the
lowest rated timeline.

Most applications will just create animations and expect them to
finish in a certain amount of time without caring about how many
frames are drawn. If a frame is going to be drawn it might as well
update all of the animations to some fraction of the total animation
rather than rounding to the nearest whole frame.

The 'frame_num' parameter of the new-frame signal is now 'msecs' which
is a number of milliseconds progressed along the
timeline. Applications should use clutter_timeline_get_progress
instead of the frame number.

Markers can now only be attached at a time value. The position is
stored in milliseconds rather than at a frame number.

test-timeline-smoothness and test-timeline-dup-frames have been
removed because they no longer make sense.
2009-06-04 13:21:57 +01:00
Emmanuele Bassi
d6d208da7d Remove Units from the public API
With the recent change to internal floating point values, ClutterUnit
has become a redundant type, defined to be a float. All integer entry
points are being internally converted to floating point values to be
passed to the GL pipeline with the least amount of conversion.

ClutterUnit is thus exposed as just a "pixel with fractionary bits",
and not -- as users might think -- as generic, resolution and device
independent units. not that it was the case, but a definitive amount
of people was convinced it did provide this "feature", and was flummoxed
about the mere existence of this type.

So, having ClutterUnit exposed in the public API doubles the entry
points and has the following disadvantages:

  - we have to maintain twice the amount of entry points in ClutterActor
  - we still do an integer-to-float implicit conversion
  - we introduce a weird impedance between pixels and "pixels with
    fractionary bits"
  - language bindings will have to choose what to bind, and resort
    to manually overriding the API
    + *except* for language bindings based on GObject-Introspection, as
      they cannot do manual overrides, thus will replicate the entire
      set of entry points

For these reason, we should coalesces every Actor entry point for
pixels and for ClutterUnit into a single entry point taking a float,
like:

  void clutter_actor_set_x (ClutterActor *self,
                            gfloat        x);
  void clutter_actor_get_size (ClutterActor *self,
                               gfloat       *width,
                               gfloat       *height);
  gfloat clutter_actor_get_height (ClutterActor *self);

etc.

The issues I have identified are:

  - we'll have a two cases of compiler warnings:
    - printf() format of the return values from %d to %f
    - clutter_actor_get_size() taking floats instead of unsigned ints
  - we'll have a problem with varargs when passing an integer instead
    of a floating point value, except on 64bit platforms where the
    size of a float is the same as the size of an int

To be clear: the *intent* of the API should not change -- we still use
pixels everywhere -- but:

  - we remove ambiguity in the API with regard to pixels and units
  - we remove entry points we get to maintain for the whole 1.0
    version of the API
  - we make things simpler to bind for both manual language bindings
    and automatic (gobject-introspection based) ones
  - we have the simplest API possible while still exposing the
    capabilities of the underlying GL implementation
2009-05-06 16:44:47 +01:00
Emmanuele Bassi
cf28c023a0 [tests] Manually advance the timelines
The units in the Timeline test suite just rely on the timeline
being a timeout automatically advanced by the main loop. This
is not the case anymore, since the merge of the master-clock.

To make the test units work again we need to "emulate" the master
clock without effectively having a stage to redraw; we do this
by creating a frame source and manually advancing the timelines
we create for test purposes, using the advance_msecs() "protected"
method.
2009-05-01 15:08:42 +01:00
Robert Bragg
603f936745 Bug 1162 - Re-works the tests/ to use the glib-2.16 unit testing
framework

	* configure.ac:
	* tests/*:
	The tests have been reorganised into different categories: conformance,
	interactive and micro benchmarks.
	- conformance tests can be run as part of automated tests
	- interactive tests are basically all the existing tests
	- micro benchmarks focus on a single performance metric

	I converted the timeline tests to conformance tests and also added some
	tests from Neil Roberts and Ebassi.

	Note: currently only the conformance tests use the glib test APIs,
	though the micro benchmarks should too.

	The other change is to make the unit tests link into monolithic binaries
	which makes the build time for unit tests considerably faster. To deal
	with the extra complexity this adds to debugging individual tests I
	have added some sugar to the makefiles so all the tests can be run
	directly via a symlink and when an individual test is run this way,
	then a note is printed to the terminal explaining exactly how that test
	may be debugged using GDB.

	There is a convenience make rule: 'make test-report', that will run all
	the conformance tests and hopefully even open the results in your web
	browser. It skips some of the slower timeline tests, but you can run
	those using 'make full-report'
2008-11-07 19:32:28 +00:00