Currently the EGLDevice code gets the display and calls eglInitialize.
As a follow-up it checks the required EGL extensions - technically it
could check the EGL device extensions earlier.
In either case, eglTerminate is missing. Thus the connection to the
display was still bound.
This was highlighted with Mesa commit d6edccee8da ("egl: add
EGL_platform_device support") + amdgpu.
In that case, since the eglTerminate is missing, we end up reusing the
underlying amdgpu_device due to some caching in libdrm_amdgpu. The
latter in itself being a good solution since it allows buffer sharing
across primary and render node of the same device.
Note: we should really get this in branches all the way back to 3.30.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/619
Fixes: 934184e23 ("MetaRendererNative: Add EGLDevice based rendering support")
Cc: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
When stage views are scaled with fractional scales, the cursor rectangle
won't be aligned with the physical pixel grid, making it potentially
blurry when positioned in between physical pixels. This can be avoided
by aligning the drawn rectangle to the physical pixel grid of the stage
view the cursor is located on.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/413https://gitlab.gnome.org/GNOME/mutter/merge_requests/610
Attaching a NULL buffer should hide the cursor sprite. In these cases,
we we'll have neither surface nor buffer damage, so also update when we
just attached a NULL buffer.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/630
When 252e64a0ea moved the texture
ownership to MetaWaylandSurface, it failed to handle the case when a
NULL-buffer is attached, leaving the texture reference in place. This
caused issues when the surface should have been hidden (e.g. attaching a
NULL buffer to a cursor surface for hiding the cursor sprite).
Related: https://gitlab.gnome.org/GNOME/mutter/issues/630
Starting from commit 7713006f5, during X11 disposition we also unmanage the
windows using the xids hash table values list.
However, this is also populated by the X11 Meta barrier implementation and then
contains both Windows and Barriers.
So when going through the values list, check whether we're handling a window or
a barrier and based on that, unmanage or destroy it.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/624https://gitlab.gnome.org/GNOME/mutter/merge_requests/605
As per commit 7718e67f, destroying the compositor causes destroying window
actors and this leads to stack changes, but at this point the stack was already
disposed and cleared.
So, clear the stack when any component that could use it (compositor, and X11)
has already been destroyed.
As consequence, also the stamps should be destroyed at later point.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/623https://gitlab.gnome.org/GNOME/mutter/merge_requests/605
Naming the keyboard accessibility settings `a11y_settings` wrongly
assumes there will never be any other type of accessibility settings.
Rename `a11y_settings` to `keyboard_a11y_settings` to avoid future
confusion.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/512
To emulate X11 grabs, mutter as a Wayland compositor would disable its
own keyboard shortcuts and when the X11 window is an override redirect
window (which never receives focus), it also forces keyboard focus onto
that X11 O-R window so that all keyboard events are routed to the
window, just like an X11 server would.
But that's a bit of a “all-or-nothing” approach which prevents
applications that would legitimately grab the keyboard under X11 (like
virtual machine viewers) to work by default.
Change “xwayland-allow-grabs” to control whether the keyboard focus
should be locked onto override redirect windows in case of an X11 grab.
For stringent needs, careful users can still use the blacklisting
feature (i.e. a list containing “!*”) to prevent grabs from any X11
applications to affect other Wayland native applications.
https://gitlab.gnome.org/GNOME/mutter/issues/597
MetaProfiler is not built when -Dprofiler=false, and that
breaks the build since MetaBackend unconditionally imports
and uses it.
Fix that by wrapping MetaProfiler in compile-time checks.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/603
Having a cursor role with a NULL renderer is valid state, and even desirable
on tablets (eg. after proximity out). In those cases it should be
interpreted as the cursor surface not being over any output.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/545
We're currently emitting the 'grab-op-end' signal when the grab prerequisites
are met, but when display->grab_op is still set to a not-NONE value and thus
meta_display_get_grab_op() would return that in the signal callback.
And more importantly when this is emitted, devices are still grabbed.
Instead, emit this signal as soon as we've unset all the grab properties and
released the devices.
Helps with https://gitlab.gnome.org/GNOME/gnome-shell/issues/1326https://gitlab.gnome.org/GNOME/mutter/merge_requests/596
We're currently emitting the 'grab-op-end' signal when the grab prerequisites
are met, but when display->grab_op is still set to a not-NONE value and thus
meta_display_get_grab_op() would return that in the signal callback.
And more importantly when this is emitted, devices are still grabbed.
Instead, emit this signal as soon as we've unset all the grab properties and
released the devices.
Helps with https://gitlab.gnome.org/GNOME/gnome-shell/issues/1326https://gitlab.gnome.org/GNOME/mutter/merge_requests/596
We handle this in backend specific code for x11, so do the wayland
bits here. We can only honor this on applications that request focus
on a surface after a startup request, as we do need an explicit
surface to apply the workspace on (and we don't have additional clues
like WMCLASS on X11). Notably, gtk_shell1.notify_startup doesn't suffice.
Another gotcha is that the .request_focus happens when the surface is
already "mapped". Due to the way x11 and the GDK api currently work (first
reply on the startup id, then map a window, then request focus on that
window). This means the surface will ignore at this point
window->initial_workspace, so it must be actively changed.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/544
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/674
On a successful DnD operation we may expect the wl_data_source and
wl_data_offer to live long enough to finish the data transfer, despite the
grab operation (and other supporting data) being gone.
When that happens, the compositor expects a wl_data_offer.finish request to
notify that it finished. However the client may still chose not to send that
and destroy the wl_data_offer instead, resulting in the MetaSelectionSource
owner for the DnD selection not being unset.
When that happens, the DnD MetaSelectionSource still exists but it's
detached from any grab operation, so will not be unset if eg. the drag
source client destroys the wl_data_source. This may result in crashes when
the next drag operation tries to replace the owner DnD MetaSelectionSource.
Check explicitly for this case, in order to ensure the DnD owner is unset
after such operations.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/591
Extract the next buffer -logic into a new function. This allows to
simplify copy_shared_framebuffer_cpu () making it more readable.
This change is a pure refactoring, no functional changes.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/593
Since commit 956ab4bd made libcanberra mandatory, we never use
the system bell for handling the `audible-bell` setting. So
instead of reacting to settings changes with the exact same call
to XkbChangeEnabledControls(), just call it once when initializing.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/598
When running in slow or busy machines (hey CI!) or under valgrind headless
tests could fail because of a non fatal warning during initialization.
So define a fatal handler that ignores the frame counter warning.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/581
Creating a window could take some time, causing false-positive failures when
running in slower or busy hardware like:
window 1/2 isn't known to Mutter
So before we proceed in doing any operation on it, wait for the client.
Do this in the test runner instead of repeating the same in every .metatest.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/581
This debug statement is actually applied all the times, while it could be useful
for crashes analysis, these days the same can be done using `MALLOC_CHECK_` and
`MALLOC_PERTURB_` env variables.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/581
This argument instructs Xwayland to exit when there are no further
client connections. However we eventually want to handle restarts
ourselves (where, notably, mutter's will be at least the last client
connection).
This behavior could also induce race conditions on startup with clients
that quickly open and close a display, which is a more pressing issue.
Also, add -noreset back (which was also removed in commit 054c25f693 that
added -terminate). We don't want to reset the X server to a pristine state
in that situation either.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/420
Code underneath seems to handle errors properly, or be x11-agnostic
entirely, this is apparently here to save a few XSync()s on X11. Just
drop this windowing dependent bit to make things cleaner.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/420
Code underneath seems to handle errors properly, and this is apparently
here to save a few XSync()s on X11. Just drop this windowing dependent
bit to make things cleaner.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/420
It is now separated into meta_xwayland_start(), which picks an unused
display and sets up the sockets, and meta_xwayland_init_xserver(), which
does the actual exec of Xwayland and MetaX11Display initialization.
This differentiation will be useful when Mutter is able to launch Xwayland
lazily, currently the former calls into the latter.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/420
In all places (including src/wayland) we tap into meta_x11_display* focus
API, which then calls meta_display* API. This relation is backwards, so
rework input focus management so it's the other way around.
We now have high-level meta_display_(un)set_input_focus functions, which
perform the backend-independent maintenance, and calls into the X11
functions where relevant. These functions are what callers should use.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/420
We use a GtkIconTheme (thus icon-theme, thus xsettings, thus x11) just to
grab a "missing icon" icon to show in place. Relax this requirement that
surfaces for icon/mini-icon will be set, and just let it have NULL here.
It seems better to have the callers (presumably UI layers) aware of this
and set a proper icon by themselves, but AFAICS there is none in sight,
not even plain mutter seems to use MetaWindow::[mini-]icon. Probably
worth a future cleanup.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/420
If the check happens on --nested (X11 backend) while there is no X11
display we would get a crash. Since the barriers are non-effective on
nested, just take it out into a separate condition.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/420
This explicit ungrab is made to ensure the other X11 display connection
is able to start an active grab immediately on the device without receiving
AlreadyGrabbed.
This is just relevant if there's two X11 display connections to transfer
grabs across, which may just happen on X11 windowing.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/420
This object takes care of the X11 representation of the window stack,
namely the _NET_CLIENT_LIST and _NET_CLIENT_LIST_STACKING root window
properties.
This code has been lifted from src/core/stack.c into src/x11 as it's
dependent on the X11 display availability. This also leaves MetaStack
squeaky clean of x11 specifics.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/420
We'd break the loop for moving attached windows at the first window,
meaning we'd only ever move a single attached dialogs or popup if it was
the first window in the list. This doesn't work out well when there are
multiple popups open, so don't break out of the loop at all until all
windows are potentially moved.
This fixes an issue in gtk4 where one or more non-grabbing popups would
end up unattached if there were more than one and the parent window was
moved.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/592
XkbNewKeyboardNotify informs the client that there is a new keyboard
driving the VCK. It is essentially meant to notify that the keyboard
possibly has a different range of HW keycodes and/or a different
geometry.
But the translation of those keycodes remain the same, and we don't
do range checks or geometry checks (beyond using KEY_GRAVE as "key
under Esc", but that is hardly one). It seems we can avoid the
busywork that is releasing all our passive grabs, reloading the keymap
and regenerating the keycombos and restoring the passive grabs.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/398
There is no reason why we should have an internal type enum when we have
all the infrastructure to just use multiple GObject types. Also there
was no code sharing between the old "types", the only common API was
getting the framebuffer ID, so lets make that a vfunc.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/584
In order to scale a rectangle by a double value, we can reuse a ClutterRect
to do the scale computations in floating point math and then to convert it back
using the proper strategy that will take in account the subpixel compensation.
In this way we can be sure that the resulting rectangle can fully contain the
original scaled one.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/469
This function was added for historic reasons, before that we had GSlist's
free_full function.
Since this can be now easily implemented with a function call and an explicit
GDestroyFunc, while no known dependency uses it let's move to use
g_slist_free_func instead.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/57
GList's used in legacy code were free'd using a g_slist_foreach + g_slist_free,
while we can just use g_slist_free_full as per GLib 2.28.
So replace code where we were using this legacy codepath.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/576
GList's used in legacy code were free'd using a g_list_foreach + g_list_free,
while we can just use g_list_free_full as per GLib 2.28.
So replace code where we were using this legacy codepath.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/576
This shouldn't happen frequently, but is just a sign that the source is
being replaced by something else. Just keep the warning for other possible
error situations.
Also, plug the potential GError leak.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/598
All child classes of `MetaWaylandShellSurface` as well as
`MetaWaylandSurfaceRoleXWayland` should only sync their actor if
their toplevel surface has a window. Currently this check is done
in the actor-surface class, but not all surface classes have a
toplevel window, e.g. dnd-surfaces.
Move the check to the right places.
For subsurfaces this assumes that the subsurface is not the child of
a window-less surface (like, as stated above, e.g. a dnd-surface).
If we want to support subsurfaces of window-less surfaces in the future
we have to extend the check here.
But as this is not a regression, ignore this case for now.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/537
Depending on the type of session, one or the other might be NULL, which
is not meant to be handled by these functions. Check for both DISPLAY
envvars before setting them on the GAppLaunchContext.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/586
This is 1) relatively likely as not all touchscreens are nice enough to
report a device size that will help us here and 2) Better than nothing if
everything fails anyway, as it will break on multi-monitor and non-default
monitor rotations.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/581
The check for the focus xwindow is called, but not used. Fix that by
renaming the variable to reflect better what it does and actually using
the return value of the check.
This was the original intention of the author in commit
05899596d1 and got broken in commit
8e7e1eeef5.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/535
If we update the ready time while the source is already in the
to-dispatch list, changing the ready time doesn't have any effect, and
the source will still be dispatched. This could cause incorrect idle
watch firing causing the power management plugin in
gnome-settings-daemon to sometimes turn off monitors due to it believing
the user had been idle for some time, while in fact, they just logged
back in.
Fix this by not actually dispatching the idle timeout if the ready time
is in the future when actually dispatching.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/543
meta_workspace_activate_with_focus is supposed to focus the passed window after
switching the workspace.
However if the passed workspace is already the active one, we just return
without activating the window.
So fix this calling meta_window_activate on the foucs_this window if that is
valid.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/562
Don't launch the stacking tests in one single shot, to allow better debugging
and being able to launch just one single test using meson test.
Those tests can now be all launched with:
meson test --suite stacking [single-test-name]
https://gitlab.gnome.org/GNOME/mutter/merge_requests/442
This is a simple clipboard manager implementation on top of MetaSelection.
It will inspect the clipboard content for UTF-8 text and image data whenever
any other selection source claims ownership, and claim it for itself
whenever the clipboard goes unowned.
The stored text has a maximum size of 4MB and images 200MB, to prevent the
compositor from allocating indefinite amounts of memory.
This is not quite a X11 clipboard manager, but also works there.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/320
This code takes care of both setting up X11 selection sources whenever
X11 clients claim selection ownership, and claiming selection ownership
on a mutter X11 window whenever other selection sources claim ownership.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/320
This object represents a Wayland selection owner. In order to invert the
FD direction (we hand an output fd, but want an inpu fd), create an
intermediate pipe so we can then create a GInputStream on top of it.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/320
This object represents the selection ownership from an X11 client. The
list of supported targets is queried upfront, so its initialization is
asynchronous. Requests to read contents from the selection will hand
a MetaX11SelectionInputStream.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/320
MetaSelectionSource represents a primary/clipboard/dnd selection owner,
it is an abstract type so wayland/x11/etc implementations can be provided.
These 3 selections are managed by the MetaSelection object, the current
selection owners will be set there, and signals will be emitted so the
previous selection owner can clean itself up.
The actual data transfer is done through the meta_selection_transfer_async()
call, which will take a GOutputStream and create a corresponding
GInputStream from the MetaSelectionSource in order to splice them.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/320
When the compositor is destroyed we should cleanup the list of window actors we
created and destroy them.
Since all the actors are added to the window_group or top_window_group we can
just destroy these containers (together with the feedback_group), and simply
free the windows list.
This is particularly needed under X11 because before we destroy the display, we
might do some cleanups as detaching the surface pixmaps and freeing the damages
and if this happens at later point (for example when triggered by garbage
collector in gnome-shell), we might crash because the x11 dpy reference is
already gone.
Destroying the window actors instead, ensures we avoid any further call to X11
related functions and that we release the actors XServer resources.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/576
When an application stops responding, the shell darkens its windows.
If a window from a not-responding application gets unmanaged
then the shell will currently throw an exception trying to retrieve
the now-dissociated window actor.
That leads to a "stuck window" ghost on screen and a traceback
in the log.
This commit addresses the problem by making sure the effect is cleaned
up before the actor is disocciated from its window.
https://gitlab.gnome.org/GNOME/mutter/issues/575
Make sure our keyboard accessibility settings structure is all zero
initialized, to avoid potential padding issues on some platform when
comparing settings.
Reported by Daniel van Vugt on IRC.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/552
This reverts a change introduced in edfe5cc3 to use `paint_clipped_rectangle()`
instead of `cogl_framebuffer_draw_rectangle()` for full paints as it
contained logic necessary for viewport src-rects. This is not longer the case.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/504
This brings the viewport src-rect code in line with how we handle
transforms, by applying a `CoglMatrix` to the pipeline instead of
changing the paint logic.
It also fixes not-y-inverted textures in combination with
transforms.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/504
When focus stealing prevention kicks in, mutter would set the demand
attention flag on the window.
Focus stealing prevention would also prevent the window from being
raised and focused, which is expected as its precisely its purpose.
Yet, when that occurs, the user expects the window which has just been
prevented from being focused to be the next one in the MRU list, so
that pressing [Alt]-[Tab] would raise and give focus to that window.
This works fine when the window is placed on the primary monitor, but
not when placed on another monitor, in which case the window which has
been denied focus is placed ahead of the MRU list and pressing
[Alt]-[Tab] would leave the focus on the current window.
This is because of a mechanism in `meta_display_get_tab_list()` which
forces the windows with the demand attention flag set to be placed first
in the MRU list when they're placed on a workspace different from the
current one.
But because workspaces apply only to the primary monitor (by default),
the windows placed on other outputs have their workspace set to `NULL`
which forces them ahead of the MRU list by mistake.
Fix this by using the appropriate `meta_window_located_on_workspace()
function to check if the window is on another workspace.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/523
The sequences may stay completed in the list (eg. pending a focus request),
it's then confusing to show the "wait" cursor icon until they are really
gone.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/541
Calculations were being done at places accounting on usec precision,
however those are still treated as having msec precision at places. Let's
consolidate for the latter since it requires less changes across the board
and usec precision doesn't buy us anything here.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/541
mutter would randomly crash in `send_xdg_output_events()` when changing
the fractional scaling:
wl_resource_post_event ()
zxdg_output_v1_send_logical_size ()
send_xdg_output_events ()
wayland_output_update_for_output ()
meta_wayland_compositor_update_outputs ()
on_monitors_changed ()
g_closure_invoke ()
signal_emit_unlocked_R ()
g_signal_emit_valist ()
_signal_emit ()
meta_monitor_manager_notify_monitors_changed ()
meta_monitor_manager_rebuild ()
This is because the xdg-output resource got freed but wasn't removed
from the list of resources.
Fix this by setting the user data of the xdg-output resource to the
corresponding `MetaWaylandOutput` so that the xdg-output resource
destructor can remove it from the list of resources.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/538
We use the combination of pressing Super and clicking+moving the mouse
to drag windows around and we also support pressing Super and using the
touchscreen to drag windows.
Since we don't want to show the overview when the Super key was used to
initiate a window drag, prevent showing the overview in case a
TOUCH_BEGIN or TOUCH_END event happened during the key was pressed.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/228https://gitlab.gnome.org/GNOME/mutter/merge_requests/495
Since "renderer/native: make EGL initialization failure not fatal" it is
possible, under specific failure conditions, to end up with a primary GPU whose
EGL initialization failed. That cannot work.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/521
The failure to initialize EGL does not necessarily mean the KMS device cannot
be used. The device could still be used as a "secondary GPU" with the CPU copy
mode.
If meta_renderer_native_create_renderer_gpu_data () fails,
meta_renderer_native_get_gpu_data () will return NULL, which may cause crashes.
This patch removes most of the failures, but does not fix the NULL dereferences
that will still happen if creating gpu data fails.
This patch reorders create_renderer_gpu_data_gbm () so that it fails hard only
if GBM device cannot be created, and otherwise always returns an initialized
gpu data structure. Users of the gpu data structure are responsible for
checking egl_display validity.
The GBM device creation failure is a hard failure because presumably GBM is
necessary for cursors.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/542https://gitlab.gnome.org/GNOME/mutter/merge_requests/521
We're currently always waiting for unfinished page flips before flipping
again. This is awkward when we are in an asynchronous retry-page-flip
loop, as we can synchronously wait for any KMS page flip event.
To avoid ending up with such situations, just freeze the frame clock
while we're retrying, then thaw it when we succeded.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/506
We rely on the frame clock to compress input events, thus if the frame
clock stops, input events are not dispatched. At the same time, there
is no reason to redraw at a full frame rate, as nothing will be
presented anyway, so slow down to 10Hz (compared to the most common
60Hz). Note that we'll only actually reach 10Hz if there is an active
animation being displayed, which won't happen e.g. if there is a screen
shield in the way.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/506
When we're in a page-flip retry loop due to the FIFO being full
(drmModePageFlip() failing with EBUSY), we should not continue to try
when starting to power save, as that means we're blocking new frames,
which itself blocks input events due to them being compressed using the
frame clock.
We'd also hit an assert assuming we only try to page flip when not power
saving.
Thus, fake we flipped if we ended up reaching a power saving state while
retrying.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/509https://gitlab.gnome.org/GNOME/mutter/merge_requests/506
It tried to add a (implicitly casted) float to a uint64_t, and due to
floating point precision issues resulted in timestamps intended to be
in the future to actually be in the past. Fix this by first casting the
delay to an uint64_t, then add it to the time stamp.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/506
DPMS is configured from a bit all over the place: via D-Bus, via X11 and
when reading the current KMS state. Each of these places did it slightly
differently, directly poking at the field in MetaMonitorManager.
To make things a bit more managable, move the field into a new
MetaMonitorManagerPrivate, and add helpers to get and set the current
value. Prior to this, there were for example situations where the DPMS
setting was changed, but without signal listeners being notified about
it.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/506
The 'underscan' property is a drm connector property, not a CRTC
property, so we would never find it. We also didn't advertise support
for the feature, meaning even if it was on the CRTC, Settings wouldn't
know about it.
Fix this by moving the property to where it belongs: in MetaOutputKms,
and properly advertise support for it if the property is found.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/507
Commit 8e9184b6 added filtering to avoid image jaggies when downscaling
but used `LINEAR_MIPMAP_NEAREST`. In some situations this could lead to
GL choosing a single lower resolution mipmap and then upscaling it, hence
slightly blurry.
We don't want to revert that change since it avoids aliasing jaggies, so
let's use `LINEAR_MIPMAP_LINEAR` instead. This provides the highest quality
filtering that GL can do and avoids the situation of GL using a single
mipmap that's lower resolution than the screen. Now it will blend that one
with the next mipmap which is higher resolution than the screen. This still
avoids jaggies but also maintains 1px resolution.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1105https://gitlab.gnome.org/GNOME/mutter/merge_requests/505
Use the ID_INPUT_WIDTH_MM/ID_INPUT_HEIGHT_MM udev properties to figure out
absolute input devices' physical size. This works across both backends, and
requires less moving pieces to have it get the right results.
Concretely, fixes size detection on X11/libinput, which makes touchscreen
mapping go wrong.
https://gitlab.gnome.org/GNOME/mutter/issues/514
Meson 0.50.0 made passing an absolute path to install_headers()'
subdir keyword a fatal error. This means we have to track both
relative (to includedir) paths for header subdirs and absolute
paths for generated headers now :-(
https://gitlab.gnome.org/GNOME/mutter/merge_requests/492
If an intersection is empty, the (x, y) coordinates are undefined, so
just use the work area and in-progress constrained window rect when
sliding according to the SLIDE_X or SLIDE_Y custom placement rule.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/496
When check_only is TRUE, the constraint should not be applied, just
checked. We failed to comply here when a placed transient window was
to be moved together with its parent, updating the window position
directly even if check_only was TRUE.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/496
If a client maps a persistent popup with a placement rule, then resizes
the parent window so that the popup ends up outside of the parent,
unmanage the popup and log a warning about the client being buggy.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/496
When a parent window is moved, attached windows (attached modal dialogs
or popups) is moved with it. This is problematic when such a window
hasn't been shown yet (e.g. a popup that has been configured but not
shown), as it'll mean we try to constrain an empty window. Avoid this
issue by not trying to auto-move empty windows.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/496
Currently, it is assumed that if querying the EGL_TEXTURE_FORMAT of a
Wayland buffer succeeds it is an EGLImage. However, this assumption will no
longer hold on upcoming versions of the NVIDIA EGL Wayland driver which
will include support for querying this attribute for EGLStream buffers as
well. Hence, we need to check if buffers are EGLStreams first.
Fixes#488https://gitlab.gnome.org/GNOME/mutter/merge_requests/477
Fixes condition duplicated:
/* If a contains b, just remove b */
if (meta_rectangle_contains_rect (a, b))
{
delete_me = other;
}
/* If b contains a, just remove a */
else if (meta_rectangle_contains_rect (a, b))
{
delete_me = compare;
}
Closes https://gitlab.gnome.org/GNOME/mutter/issues/480
Traditionally visual alerts were implemented by flashing the focus
window's frame. As that only works for windows that we decorate,
flashing the whole window was added as a fallback for client-decorated
windows.
However that introduces some confusing inconsistency, better to just
always flash the entire window.
https://gitlab.gnome.org/GNOME/mutter/issues/491
When commit 91c6a144da synced shadows with Adwaita, it removed the
shadow completely from attached modal dialogs. However Adwaita uses
the same shadow for all dialogs (modal or not), so do the same here.
https://gitlab.gnome.org/GNOME/mutter/issues/490
The app menu always was a GNOME-only thing, so after it was removed this
cycle, assuming that it is not displayed by the environment is a better
default.
https://gitlab.gnome.org/GNOME/mutter/issues/493
The function finish_cb can be called as a result of a call to ca_context_cancel
in cancelled_cb. This will result in a deadlock because, as per documentation,
g_cancellable_disconnect cannot be called inside the cancellable handler.
It is possible to detect if the call to finish_cb is caused by ca_context_cancel
checking if error_code == CA_ERROR_CANCELED. To avoid the deadlock we should
call g_signal_handler_disconnect instead g_cancellable_disconnect if this is the
case.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/474
Splitting out the X11 display initialization from display_open() broke
restoring the previously active workspace in two ways:
- when dynamic workspaces are used, the old workspaces haven't
been restored yet, so we stay on the first workspace
- when static workspaces are used, the code tries to access
the compositor that hasn't been initialized yet, resulting
in a segfault
Fix both those issues by splitting out restoring of the active workspace.
https://gitlab.gnome.org/GNOME/mutter/issues/479
We use the input_method on both branches, but only check for its existence
when enabling the text_input. The case of focusing out shouldn't happen in
practice as we couldn't have focused in ever before, but still make the
check one level above so it's clearer that the text_input's IM focus cannot
be enabled without an IM implementation.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/432
Enable the OSK if receiving .enable consecutively (i.e. the
ClutterInputFocus was already focused). We specifically want to avoid
enabling the panel just because of focus changes within a surface (where
the .disable request across focus change would previously unfocus the
ClutterInputFocus). Prior state should be preserved if possible in that
situation.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/432
Meta rectangles are integer based while clutter works in floating coordinates,
so when converting to integers we need a strategy.
Implement the shrink strategy by ceiling the coordinates and flooring the width,
and the grow strategy reusing clutter facility for this.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/3
A clutter actor might be painted on a stage view with a view scale
other than 1. In this case, to show the content in full resolution, the
actor must use a higher resolution resource (e.g. texture), which will
be down scaled to the stage coordinate space, then scaled up again to
the stage view framebuffer scale.
Use a 'resource-scale' property to save information and notify when it
changes.
The resource scale is the ceiled value of the highest stage view scale a
actor is visible on. The value is ceiled because using a higher
resolution resource consistently results in better output quality. One
reason for this is that rendering is often not perfectly pixel aligned,
meaning even if we load a resource with a suitable size, due to us still
scaling ever so slightly, the quality is affected. Using a higher
resolution resource avoids this problem.
For situations inside clutter where the actual maximum view scale is
needed, a function _clutter_actor_get_real_resource_scale() is provided,
which returns the non-ceiled value.
Make sure we ignore resource scale computation requests during size
requests or allocation while ensure we've proper resource-scale on
pre-paint.
https://bugzilla.gnome.org/show_bug.cgi?id=765011https://gitlab.gnome.org/GNOME/mutter/merge_requests/3
We need to use pixel size of the monitor in order to generate a valid
texture with full quality for current monitor
In spanned case the background should cover all the differently scaled monitors
thus we scale the texture up to the maximum scaling level and then we resample
it drawing only each side in the monitor it should occupy using the proper
scaling level.
In wallpaper mode (or color mode) for example we don't need to scale the area,
also the texture size we return should be unscaled, not to confuse
MetaBackgroundActor making it use more space than needed.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
When we floor the quad coordinates then we've also to enlarge the quad by the
difference between the floored value and the actual coordinate, otherwise
we'd end up in a smaller quad.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/3
When the touch_down event was not delivered to Wayland clients, there's
no point in keeping the touchpoint in our list, so remove it early
inside update() instead of removing it after the touch ended.
This fixes a crash inside touch_handle_surface_destroy() where the
assertion to make sure the surface is removed fails because the
touch_count of the surface never reached 0. This in turn happened
because a new sequence was added, while a (already ended one) wasn't
removed from the touch->touches list before. This caused the touch
counter to get incremented by 1 while no new sequence was added to the
list (because Clutter reuses sequence IDs, the old sequence is equal to
the new one, i.e. the new sequence already is present in the list).
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/200https://gitlab.gnome.org/GNOME/mutter/merge_requests/426
Make the RecordWindow method also understand the 'cursor-mode' property.
For 'embedded' the cursor is drawn onto the pixel buffer using cairo,
otherwise it works similarly to how RecordMonitor deals with it.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/413
To be used to translate absolute cursor positions to relative positions,
as well as to determine whether a cursor sprite is inside the stream or
not. It also helps calculating the scale the cursor sprite needs to be
scaled with to be in stream coordinate space.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/413
As the stream size is the logical monitor size multiplied with the ceil
of the logical monitor scale, the corresponding logical size, which is
what should be passed via the size property on the D-Bus object, should
be the logical monitor size.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/413
Make the monitor implementation do things strictly related to its own
source type, leaving the Spa related logic and cursor read back in the
generic layer, later to be reused by the window source type
implementation.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/413
Since commit 8df2a1452c (As pointed out by Robert Mader) we just happened
do this check when doing the first lookup for a Wayland surface for a
XWayland window, when we are later notifying upon surface creation we just
set the relation with no further checks.
The cases pointed out in the comment (eg. window changing decoration) might
presumably happen in a quick enough sequence that we have two scheduled
associations on the fly, so move this check to the more generic
meta_xwayland_associate_window_with_surface() which is called on both
immediate and delayed paths.
https://gitlab.gnome.org/GNOME/mutter/issues/361
There are most likely no GNOME users left still using hardware that
does not support NPOT textures. Further more, they would crash much
earlier and never hit this code-path. So remove the unnecessary check
here.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/447
XWayland creates buffers of the combined size of all connected displays.
This can, especially on older but still in use hardware, exceed the limits
of the GPU.
If that is the case, use `CoglTexture2DSliced` instead of `CoglTexture2D`
https://gitlab.gnome.org/GNOME/mutter/merge_requests/447
We might fail to page flip a new buffer, often after resuming, due to
the FIFO being full. Prior to this commit, we handled this by switching
over to plain mode setting instead of page flipping. This is bad because
we won't be synchronized to the refresh rate anymore, but just the
clock.
Instead, deal with this by trying again until the FIFO is no longer
full. Do this on a v-sync based interval, until it works.
This also changes the error handling code for drivers not supporting
page flipping to rely on them returning -EINVAL. The handling is moved
from pretending a page flip working to explicit mode setting in
meta-renderer-native.c.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/460
A renderer view will, under the native backend, since long ago always
have a logical monitor associated with it, so remove the code handling
the legacy non-stage view case.
https://gitlab.gnome.org/GNOME/mutter/issues/460
Prior to this commit, MetaWaylandSurface held a reference to
MetaWaylandBuffer, who owned the texture drawn by the surface. When
switching buffer, the texture change with it.
This is problematic when dealing with SHM buffer damage management, as
when having one texture per buffer, damaged regions uploaded to one,
will not follow along to the next one attached. It also wasted GPU
memory as there would be one texture per buffer, instead of one one
texture per surface.
Instead, move the texture ownership to MetaWaylandSurface, and have the
SHM buffer damage management update the surface texture. This ensures
damage is processed properly, and that we won't end up with stale
texture content when doing partial texture uploads. If the same SHM
buffer is attached to multiple surfaces, each surface will get their own
copy, and damage is tracked and uploaded separately.
Non-SHM types of buffers still has their own texture reference, as the
texture is just a representation of the GPU memory associated with the
buffer. When such a buffer is attached to a surface, instead the surface
just gets a reference to that texture, instead of a separately allocated
one.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/199
When we freed the cursor GPU state including the gbm_bo objects attached
to it, we didn't unset the cursor renderer private of the CRTCs of the
associated GPU. This means that HW cursor invalidation could potentially
break if a new gbm_bo happened to be allocated at the same memory
address as the previous one.
To avoid this, iterate through the CRTCs of the GPU of which the cursor
data is freed, and unset the cursor renderer private if it was the one
destroyed.
https://gitlab.gnome.org/GNOME/mutter/issues/199
What was actually done when calling meta_wayland_buffer_attach() was
that the texture was realized, so just call the function
`meta_wayland_dma_buf_realize_texture()` and call that.
This is in preparation to change how meta_wayland_buffer_attach() work.
https://gitlab.gnome.org/GNOME/mutter/issues/199
The signal handler must return TRUE as the invocation is already handled
by returning an error. Also update the error message a bit to clarify
that the API exists only for testing purposes.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/457
We should not only take the old CRTC for an output whenever
possible, but we should also assign one that is 'free', i.e.
one that another monitor (to be processed after this one)
isn't using, so that that monitor can use the same CRTC.
https://gitlab.gnome.org/GNOME/mutter/issues/373
We shouldn't change an output's CRTC if we don't have to, as
that causes the output to go black.
This patch depends on
"monitor-unit-tests: initial crtcs in custom_lid_switch".
https://gitlab.gnome.org/GNOME/mutter/issues/373
This test forgot to specify the existing CRTC routings in the setup. For the
first output the default 0 was ok, now it is -1 to ensure that the code will
assign it correctly. For the second output the default 0 was incorrect, because
possible_crtcs does not include 0. Now that CRTC is initialized to off
instead, because the second output is hotplugged later and running a CRTC
without an output does not make sense.
This fix will keep this test passing when a future patch attempts to preserve
existing CRTC routings. Assuming that any existing routing is valid, such
routing will be kept. In this test case the existing routing was illegal, it
should have been impossible, which then causes that future patch to fail the
test by assigning the wrong CRTC.
https://gitlab.gnome.org/GNOME/mutter/issues/373
The external grab handler is shared across all external bindings and external
bindings have now different binding flags. For this reason, when rebuilding the
binding table there could be loss of information if we assign the bindings flags
of the external handler to all external bindings. Let's store the bindings flags
in MetaKeyGrab too and use this when rebuilding the binding table to avoid the
above issue.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/169
The "force restore shortcuts" being triggered by a key-combo, there is
no guarantee that the currently focused window is actually non-NULL in
which case we would crash.
Make sure there is a window currently focused before trying to restore
the shortcuts on that window.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/464
On X11, if a window cannot be maximized because its minimum size is
already larger than the output size, a request to maximize will be
ignored.
On Wayland, however, we would still honor the maximize request and
switch the window state to maximized, without actually moving the window
which leads to weird visual effects, as the window end up being
maximized in-place.
To avoid this, make sure the window has the maximize functionality
available prior to change its state in xdg-shell `set_maximized`
request.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/463
As per commit 43633d6b, we mark an unmanaging window as not focusable, while
this is true, it might cause not resetting the current focused window when
unmanaging it causing a crash.
Also this wouldn't allow to check if a window can be focused when unmanaging it,
so let's revert the previous behavior.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/462
This was wrongly done just before enable, which is not right as
per the protocol. A side effect was that input purpose/hints were
eagerly reset before being applied, thus not properly honored,
noticed in the doing of emoji/numeric OSK panels.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/410
This means we need to make sure we don't accidentally free the provided
source GError (which automatically happens with `g_autoptr`), so use
`g_steal_pointer()`.
This fixes an issue where, when launched in a bubblewrap environment
(such as the one provided by Buildstream), mutter would give the
following warning message:
```
mutter-WARNING **: 8:31:35:069: Can't initialize KMS backend: (null)
```
... which isn't that useful when trying to debug the actual issue.
Iterate over all the monitor product words to check for a partial matching on
EDID, otherwise we would hang inside an infinite while loop.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/459
This adds the required bits to wayland surfaces and ties them up
to the compositor parts.
It is based on and very similar in nature to buffer transforms.
From the specification:
> The global interface exposing surface cropping and scaling
> capabilities is used to instantiate an interface extension for a
> wl_surface object. This extended interface will then allow cropping
> and scaling the surface contents, effectively disconnecting the
> direct relationship between the buffer and the surface size.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/323
This implements the viewporter protocol which offers a cropping and scaling
capabilities to wayland clients.
There are several use cases for this, for example video players and games,
both as a convenience function and as potential performance optimization when
paired with hardware overlays etc.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/323
For various error and warning messages, mutter includes a description of
the window, and that description includes a snippet of the title of the
window. Those snippets find their way into system logs, which then means
they can potentially find their way into bug reports and similar. Remove
the window title information to eliminate this potential privacy issue.
The helper function from gdbus-codegen broadcasts the signal emission,
but we really only care about sending it to the specific peer that
created the session. Thus, only emit the signal to the particular peer
that owns the session.
https://bugzilla.gnome.org/show_bug.cgi?id=784199
If the extension is missing, the GPU copy path would not work. The code sets
the error, but forgets to return a failure. Fix this.
While adding the necessary return FALSE, also destroy the EGL context we just
created. Code refactoring shares the destroying code.
Found by reading code.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/416
If the GPU copy path would use a software renderer, fall back to the CPU
copy path. The CPU copy path is possibly faster and avoids screen
corruption issues that were observed on an Intel Haswell desktop. The
corruption was likely due to texturing from an unfinished rendering or
memory caching issues.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/325
Print the pixel format chosen for an output on a secondary GPU for
debugging. Knowing the format can aid in debugging e.g. red/blue channel
swaps and CPU copy performance issues.
This adds a DRM format printing helper in meta-crtc-kms.h. This header
is included in most native backend files making it widely available,
while DRM formats are specific to the native backend. It could be shared
with Wayland bits, DRM format codes are used there too.
The helper makes the pixel format much more readable than a "%x".
https://gitlab.gnome.org/GNOME/mutter/merge_requests/341
When setting up an output on a secondary GPU with the CPU copy mode,
allocate the dumb buffers with a DRM format that is advertised supported
instead of hardcoding a format.
Particularly, DisplayLink devices do not quite yet support the hardcoded
DRM_FORMAT_XBGR8888. The proprietary driver stack actually ignores the
format assuming it is DRM_FORMAT_XRGB8888 which results the display
having red and blue channels swapped. This patch fixes the color swap
right now, while taking advantage if the driver adds support for XBGR
later.
The preferred_formats ordering is somewhat arbitrary. Here it is written
from glReadPixels point of view, based on my benchmarks on Intel Haswell
Desktop machine. This ordering prefers the format that was hardcoded
before.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/341
These functions allow inspecting which pixel formats a CRTC's primary
plane supports. Future patches will inspect the supported formats and
pick a framebuffer format accordingly instead of hardcoding a format.
The copy list function will be used to initialize a formats list, and
the supports format function will be used to intersect that list against
another CRTC's supported formats.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/341
This avoids having to hardcode the same fallbacks elsewhere multiple
times when determining what formats might be suitable for a set of
CRTCs. The formats_modifiers hash table is now guaranteed to be
populated with at least something, so future code will not need to
handle it being empty.
The hardcoded fallback formats are a minimal set probably supported by
most hardware. XRGB8888 is the format that, according to ancient lore,
all DRM devices should support, especially if they don't have the
capability to advertise otherwise. Mutter also hardcodes XRGB8888 as the
GBM surface format, so it is already required on primary GPUs.
XBGR8888 matches the most common OpenGL format, sans alpha channel since
scanout hardware has not traditionally supported alpha. XBGR8888 is here
also because Mutter hardcodes that format for secondary GPU outputs when
using the CPU copy path.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/341
If the IN_FORMATS property is not found, copy the formats from the DRM
plane instead. This is the fallback for getting a list of formats the
primary plane supports when DRM universal planes capability is enabled.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/341
Rather than picking just one format, parse and store all the formats and
their modifiers.
This gives us a list of supported formats (and modifiers) on a CRTC
primary plane. Later I will be using this list to choose a framebuffer
format instead of hardcoding it.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/341
This is done through gtk-shell ATM. If a window requests focus with
an invalid startup ID, just the demands-attention flag will be set.
The "did user interaction happen in between" checks are left to
meta_window_activate_full/meta_window_focus, by passing the timestamp
of the original launch request.
This version has 2 new requests:
- gtk_shell1.notify_launch notifies the compositor that the requesting
client shall launch another application. The given ID is expected to
be unique.
- gtk_surface1.request_focus notifies the compositor that a surface
requests focus due to it being activated. The given ID is passed to
this process through undetermined means, if it corresponds with a
current startup ID and there was no user interaction in between the
surface will be focused, otherwise it will demand attention.
It scaled the logical monitor rect with scale to get the stream
dimensions, but that is only valid when having
'scale-monitor-framebuffers' enabled. Even when it was, it didn't work
properly, as clutter_stage_capture_into() doesn't work properly with
scaled monitor framebuffers yet.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/415
Commit 25f416c13d added additional compilation warnings, including
-Werror=return-type. There are several places where this results
in build failures if `g_assert_not_reached()` is disabled at compile
time and the compiler misses a return value.
https://gitlab.gnome.org/GNOME/mutter/issues/447
Shell is using these, which was revealed by
1bbb5c8107 breaking its build when
generating its introspection due to meta_startup_notification_get_type()
not being found.
We keep the class structs private, so in practice MetaStartupSequence
and MetaBackend can't be derived from (the are semi-private).
Make meson link libmutter using -fvisibility=hidden, and introduce META_EXPORT
and META_EXPORT_TEST defines to mark a symbols as visible.
The TEST version is meant to be used to flag symbols that are only used
internally by mutter tests, but that should not be considered public API.
This allows us to be more precise in selecting what is exported and what is
not, without the need of a version-script file that would be more complicated
to maintain.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/395
MonitorManager was inheriting from MetaDBusDisplayConfigSkeleton, this was
causing introspection to see this like a GDBus skeleton object exposing to
clients methods that were not required.
Also, this required us to export meta_dbus_* symbols to the library, while
these should be actually private.
So, make MetaMonitorManager to be just a simple GObject holding a skeleton
instance, and connect to its signals reusing most of the code with just few
minor changes.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/395
pkg-config files for mutter are generated using *_pkg_deps as requires, but
programs linked with libmutter doesn't need most of these private dependencies
which are only needed for building and linking mutter and its subprojects.
So list packages needed only by mutter itself inside *_pkg_private_deps and
don't expose such packages to pkg-config, but only use them at build time.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/3955
Soname of the libraries should be the major version number, while the version
triplet is currently used:
objdump -p libmutter-4.so.0.0.0 | grep SONAME
SONAME libmutter-4.so.0.0.0
While is expected to be only libmutter-4.so.0
Fix all shared libraries by setting valid version and soversion.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/3955
