Commit Graph

27985 Commits

Author SHA1 Message Date
Robert Mader
8bf87a7e73 shaped-texture: Remove mask texture handling from get_image()
It has been broken for a long time now, not handling shadows of
SSD clients well. Instead, just use the offscreen code paths.

Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1110

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1996>
2021-09-22 13:07:44 +00:00
Jonas Ådahl
1031de5605 tests/dbus-runner: Make sure to tear-down even on test failure
When a test failed, an exception would be raised. This meant that the
mocked service would stay alive, and the test case being run eventually
failing due to a timeout, not the failure itself.

Fix this by catching the exception during the test, ensuring that we
tear down properly, then re-raise the same exception again after having
teared down.

This avoids the dead lock, while still printing the appropriate error
message.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2008>
2021-09-22 12:37:23 +00:00
Jonas Ådahl
fca9010963 mutter: Add signal handlers
With the introduction of MetaContext, the responsibility for handling
signals was changed to the application (e.g. GNOME Shell) using
libmutter. What wasn't fixed was making the stand-alone mutter do the
equivalent as well. This commit fixes this.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2007>
2021-09-22 11:38:17 +00:00
Danial Behzadi
4d342c8e06 Update Persian translation 2021-09-21 14:25:25 +00:00
Марко Костић
55f5b19513 Update Serbian translation 2021-09-20 18:56:21 +00:00
José Expósito
36b5719a3b backends/x11: Fix middle button emulation settings
Update the name of the property used to toggle middle click emulation to
"libinput Middle Emulation Enabled".

Fix: <#1881>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2000>
2021-09-20 17:39:15 +00:00
Erfan Abdi
922878acc6 wayland/dma-buf: Add support for BGR_8888 formats
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1999>
2021-09-20 17:07:54 +00:00
Jonas Ådahl
9bd2c5c6f2 cogl/context: Report error if allocating fallback texture failed
Error out if we fail to allocate the 1x1 all white fallback texture. If
we don't do this, and instead continue, any future (likely) allocation
failure will end up in obscure places that assumes the fallback texture
exists.

Related: https://bugzilla.redhat.com/show_bug.cgi?id=1989726
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1994>
2021-09-20 16:37:37 +00:00
Jonas Ådahl
b10b77cc46 clutter/backend: Propagate error when initializing context
Any caught error message was silently dropped.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1994>
2021-09-20 16:37:37 +00:00
Daniel van Vugt
b6857e59b2 shaped-texture: Fix whitespace/indentation warnings
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1992>
2021-09-20 16:07:59 +00:00
Marco Trevisan (Treviño)
ef0f708404 monitor-manager: Use connect_object to connect to settings signals
We were disconnecting from the wrong object, so instead of adjusting it
we can simply use "new" utility functions instead.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
2021-09-20 15:37:59 +00:00
Marco Trevisan (Treviño)
16e335eb24 backends/native: Remove unused includes
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
2021-09-20 15:37:59 +00:00
Marco Trevisan (Treviño)
3d689989ea kms/connector: Use utility function to get the property ID
We already have one for this, so use it instead of repeating the same

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
2021-09-20 15:37:59 +00:00
Marco Trevisan (Treviño)
cbfb59b828 backends/native: Ignore udev events while we're paused
When the native backend is paused we still process the udev events
even though this isn't needed and may just cause unneeded events to be
triggered afterwards.

Since we'll resume with full changes on such event, we can just block
the signal hander when paused and restore it afterwards.

As per this we can cleanup also a bit the device adding signal handling
given that now we don't have to disconnect/reconnect it again.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
2021-09-20 15:37:59 +00:00
Marco Trevisan (Treviño)
9cb35e2c80 backends/kms: Always perform full changes on KMS resume
Resume happens after we may have received various events that we've
ignored, so at this point we need to just emit an hotplug event like if
everything changed so that user settings may be re-applied.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
2021-09-20 15:37:59 +00:00
Marco Trevisan (Treviño)
dd0ad3bfb1 kms/impl-device: Only update crtc/connector whose ID has changed
On hotplug events we may get informations about what CRTC or connector
changed a property (and the property itself), so in such case let's just
ignore the changes to the non-affected CRTCs/connectors, and let's read
only the affected one

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
2021-09-20 15:37:59 +00:00
Marco Trevisan (Treviño)
91ed95ab6f kms: Only update a device state if it contains the changed crtc/connector
On hotplug events we may receive a "CRTC" or "CONNECTOR" property that
indicates which crtc/connector property ID has changed.

In such case, instead of update data for all the devices, only update the
device containing the relative connector.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
2021-09-20 15:37:59 +00:00
Marco Trevisan (Treviño)
3d3668a389 kms/device: Add functions to find connector and crtc in devices
Hotplug events may contain CRTC or CONNECTOR ids to notify a property
change to just one owner, so we need to find its parent device.

Also we may want to update properties directly without having to go through
all the devices, so expose a simple way to find them.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
2021-09-20 15:37:59 +00:00
Marco Trevisan (Treviño)
ea00c96044 udev: Pass the device as parameter on hotplug events
This will allow to find the related MetaKmsDevice that is emitting the
hotplug event

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
2021-09-20 15:37:59 +00:00
Marco Trevisan (Treviño)
49501c28f2 kms: Return a more specific change if there are no devices
In case we have no devices, after a KMS update (both because they've
all have been removed or because there were none), we may need to behave
differently compared to the case in which nothing changed, so add a more
specific KMS update change type

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
2021-09-20 15:37:59 +00:00
Marco Trevisan (Treviño)
9ce3abad28 monitor-manager-native: Do not reload all the monitors on gamma-only change
If only gamma changed on drm CRTC's we don't have to rebuild the whole
monitors, nor to inform the backed about, the only consumer could be the
DBus API, and so we still emit a signal, but nothing else is needed.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
2021-09-20 15:37:59 +00:00
Marco Trevisan (Treviño)
a8d11161b6 kms: Only emit resources-changed signal if we recorded a change
Since we cache already all the KMS parameters we care about let's check at
each device update if anything has really changed and only in such case
emit a resources-changed signal.

In this way we can also filter out the DRM parameters that when changed
don't require a full monitors rebuild.

Examples are the gamma settings or the privacy screen parameters, that
emits an udev "hotplug" event when changed, but we want to register those
only when we handle the changed property.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
2021-09-20 15:37:59 +00:00
Christian Rauch
d2eec866ed wayland: Allow to maximize windows by client regardless of constraints
A client request for maximizing itself should always be handled by mutter
by emitting a configure event with the native maximized resolution,
regardless of the client's own set limits. This also aligns the behavior by
allowing fixed-sized windows to go into fullscreen or maximized state.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1997>
2021-09-20 15:09:17 +00:00
Robert Mader
3192b0239a wayland-dma-buf: Add support for DRM_FORMAT_XBGR2101010
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1810>
2021-09-20 14:39:20 +00:00
Robert Mader
9ededb9b34 wayland-dma-buf: Use alpha-less pixel formats where appropriate
The XRGB/XBGR pixel formats do not set the cogl alpha bit. This
allows for example `MetaShapedTexture` to use the fast opaque
path for rendering and `MetaCullable` to detect whether a
`MetaSurfaceActor` is opaque.

Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1733

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1810>
2021-09-20 14:39:20 +00:00
Robert Mader
daace1aac5 cogl: Add XRGB_FP_16161616 and XBGR_FP_16161616 formats
These match their alpha counterparts, apart from not setting the
alpha bit. This allows our internal mashinery to more easily
distinguish whether we need a slow alpha-pass during rendering or not.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1810>
2021-09-20 14:39:20 +00:00
Robert Mader
dc442e7a75 cogl: Add XRGB_2101010 and XBGR_2101010 formats
These match their alpha counterparts, apart from not setting the
alpha bit. This allows our internal mashinery to more easily
distinguish whether we need a slow alpha-pass during rendering or not.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1810>
2021-09-20 14:39:20 +00:00
Michel Dänzer
3059d3ffc8 cursor-renderer: Remove meta_cursor_renderer_is_overlay_visible
Not used anymore.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1914>
2021-09-20 14:00:08 +00:00
Michel Dänzer
62cdf8de5e clutter/stage: Remove clutter_stage_capture_into
Not used anymore.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1914>
2021-09-20 14:00:08 +00:00
Michel Dänzer
6c818cd8d5 screen-cast/monitor-src: Use clutter_stage_paint_to_buffer
It works correctly with scanouts, in contrast to
clutter_stage_capture_into. Inspired by
meta_screen_cast_area_stream_src_record_to_buffer.

maybe_paint_cursor_sprite is now unused and thus removed.

v2:
* clutter_stage_paint_to_buffer requires switching to recording from an
  idle callback as well. (Jonas Ådahl)
v3:
* Set human readable name for idle source. (Ivan Molodetskikh)

Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1940
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1914>
2021-09-20 14:00:08 +00:00
Michel Dänzer
10d1de2bdf screen-cast/monitor-src: Always set before-paint watch
We weren't setting it for META_SCREEN_CAST_CURSOR_MODE_EMBEDDED, so
that case didn't work correctly with scanouts.

Suggested by Georges Basile Stavracas Neto.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1914>
2021-09-20 14:00:08 +00:00
Danial Behzadi
42797224b5 Update Persian translation 2021-09-20 13:15:33 +00:00
eshagh shahidani
4623386650 Update Persian translation 2021-09-20 13:06:01 +00:00
Florian Müllner
f5daf0f1b9 Bump version to 41.0
Update NEWS.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2005>
2021-09-19 12:41:29 +02:00
Ask Hjorth Larsen
49187ec1d5 Updated Danish translation 2021-09-17 15:22:17 +02:00
Corentin Noël
f140d01df2 context: Add some missing introspection data
Allows to use option groups/entries from the introspection.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1976>
2021-09-16 07:23:24 +00:00
Olivier Fourdan
20bb8bf502 wayland: Avoid a race in wl_seat capabilities
The way wl_seat capabilities work, by notifying clients of capabilities
changes, and clients consequently requesting the relevant interface
objects (pointer, keyboard, touch) is inherently racy.

On quick VT changes for example, capabilities on the seat will be added
and removed, and by the time the client receives the capability change
notification and requests the relevant keyboard, pointer or touch,
another VT switch might have occurred and the wl_pointer, wl_keyboard or
wl_touch already destroyed, leading to a protocol error which kills the
client.

To avoid this, create the objects when requested regardless of the
capabilities.

Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1797
Related: https://bugzilla.gnome.org/show_bug.cgi?id=790932
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/77>
2021-09-16 06:52:20 +00:00
Jordi Mas
73c6540028 Update Catalan translation 2021-09-15 21:28:39 +02:00
Nathan Follens
09d24b452f Update Dutch translation 2021-09-13 14:57:57 +00:00
Piotr Drąg
843ce788fe Update Polish translation 2021-09-11 13:20:26 +00:00
Balázs Úr
bcd50d980b Update Hungarian translation 2021-09-10 19:07:46 +00:00
Goran Vidović
d5493dd032 Update Croatian translation 2021-09-10 17:04:07 +00:00
Philipp Kiemle
b935f1f5d2 Update German translation 2021-09-09 20:17:41 +00:00
Emin Tufan Çetin
bc289bdb13 Update Turkish translation 2021-09-09 19:26:00 +00:00
Gwan-gyeong Mun
83db4f53f1 Update Korean translation 2021-09-09 12:18:51 +00:00
eshagh shahidani
697c8847a4 Update Persian translation 2021-09-08 06:25:15 +00:00
Luna Jernberg
fa42831b94 Update Swedish translation 2021-09-07 17:29:09 +00:00
Goran Vidović
42671806ca Update Croatian translation
(cherry picked from commit d09daa644adf465859585b2634c019df6fe2992b)
2021-09-05 21:02:51 +00:00
Daniel Șerbănescu
69bd367579 Update Romanian translation 2021-09-05 09:44:06 +00:00
Florian Müllner
c085e1f6be Bump version to 41.rc
Update NEWS.

Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1987>
2021-09-05 01:25:56 +02:00