To aid with backporting patches from master made after the deprecated
CoglShader api was removed this patch adds the cogl-glsl- files that
have been added on master so we should get less conflicts when cherry
picking.
This adds a check for the glsl version during driver init which gets
stored in ctx->glsl_major and ctx->glsl_minor.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 9bde48bda6d602dd536c3536d56d2ff7545802c3)
This splits out the GL version parser code from
cogl-driver-gl.c:_cogl_get_gl_version() so it can also be used for
parsing other gl version strings.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 66c2e74b9d61669fb5b93cf9a31cc8659a601fdd)
The function pointer for texture_2d_get_data in the driver vtable was
expecting an unsigned int for the rowstride but the definition in
cogl-texture-2d-gl.c took a size_t so it was giving an annoying
warning. This normalizes them both to just take an int. This seems to
better match the pattern used for cogl_bitmap_new_from_data and
cogl_texture_2d_new_from_data.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 003f080531d5368835081568779b031ef4f09a77)
This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of
setting up the state of a pipeline:
» fixed; where the vertex and fragment processing are implemented
using fixed function opengl apis.
» fixed-arbfp; where vertex processing is implemented using fixed
function opengl apis but fragment processing is implemented
using the ARB Fragment Processing language.
» glsl; there vertex and fragment processing are both implemented
using glsl.
This means we avoid unusual, combinations such as glsl for vertex
processing and arbfp for fragment processing, and also avoid pairing
fixed-function vertex processing with glsl fragment processing which we
happen to know hits some awkward code paths in Mesa that lead to poor
performance.
As part of this change, the progend now implies specific vertend and
fragend choices so instead of associating a vertend and fragend with a
pipeline we now just associate a progend choice.
When flushing a pipeline and choosing what progend to use, we now call a
progend->start() method that is able to determine if the vertend and
fragend together will be able to handle the given pipeline so the
vertend and fragend ->start() methods no longer need to return a boolean
status.
Since we now don't need to support glsl used in conjunction with fixed
function this will allow us to avoid ever using OpenGL builtin attribute
names, though this patch doesn't change that yet.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
As part of an on-going effort to be able to support non-opengl drivers
for Cogl this splits out the opengl specific code from cogl-buffer.c
into driver/gl/cogl-buffer-gl.c
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 4d7094a979ff2cbbe4054f4a44ca05fc41a9e447)
The buffer and bitmap _bind() functions are GL specific so to clarify
that, this patch adds a _gl infix to these functions, though it doesn't
yet move the implementations out into gl specific files.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 6371fbb9637d88ff187dfb6c4bcd18468ba44d19)
As part of an on-going effort to enable non-opengl drivers for Cogl this
splits out the opengl specific code in cogl-clip-stack.c into
cogl/driver/cogl-clip-stack-gl.c
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit acf989f1bb628282c53d1249b2e3fc6f6579f1e9)
As part of an on-going effort to enable non-opengl drivers for Cogl this
splits out the GL specific code in cogl-attribute.c into
cogl/driver/gl/cogl-attribute-gl.c
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 7e20c39c47fa176aa5062867ff273bc2c41a2f22)
This factors out all of the OpenGL specific code in cogl-texture-2d.c
into cogl-texture-2d-gl.c and where necessary adds indirection through
the CoglDriver vtable so that we can eventually start to experiment with
non-OpenGL backends for Cogl.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit ec57588671696bbe7ce714bdfe7324236146c9c0)
This renames the set_filters and set_wrap_mode_parameters texture
virtual functions to gl_flush_legacy_texobj_filters and
gl_flush_legacy_texobj_wrap_modes respectively to clarify that they are
opengl driver specific and that they are only used to support the legacy
opengl apis for setting filters and wrap modes where the state is
associated with texture objects instead of being associated with sampler
objects.
This part of an effort to clearly delimit our abstraction over opengl so
that we can start to consider non-opengl backends for Cogl.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 6f78b8a613340d7c6b736e51a16c625f52154430)
Although we use GLib internally in Cogl we would rather not leak GLib
api through Cogl's own api, except through explicitly namespaced
cogl_glib_ / cogl_gtype_ feature apis.
One of the benefits we see to not leaking GLib through Cogl's public API
is that documentation for Cogl won't need to first introduce the Glib
API to newcomers, thus hopefully lowering the barrier to learning Cogl.
This patch provides a Cogl specific typedef for reporting runtime errors
which by no coincidence matches the typedef for GError exactly. If Cogl
is built with --enable-glib (default) then developers can even safely
assume that a CoglError is a GError under the hood.
This patch also enforces a consistent policy for when NULL is passed as
an error argument and an error is thrown. In this case we log the error
and abort the application, instead of silently ignoring it. In common
cases where nothing has been implemented to handle a particular error
and/or where applications are just printing the error and aborting
themselves then this saves some typing. This also seems more consistent
with language based exceptions which usually cause a program to abort if
they are not explicitly caught (which passing a non-NULL error signifies
in this case)
Since this policy for NULL error pointers is stricter than the standard
GError convention, there is a clear note in the documentation to warn
developers that are used to using the GError api.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46)
Note: Since we can't change the Cogl 1.x api the patch was changed to
not rename _error_quark() functions to be _error_domain() functions and
although it's a bit ugly, instead of providing our own CoglError type
that's compatible with GError we simply #define CoglError to GError
unless Cogl is built with glib disabled.
Note: this patch does technically introduce an API break since it drops
the cogl_error_get_type() symbol generated by glib-mkenum (Since the
CoglError enum was replaced by a CoglSystemError enum) but for now we
are assuming that this will not affect anyone currently using the Cogl
API. If this does turn out to be a problem in practice then we would be
able to fix this my manually copying an implementation of
cogl_error_get_type() generated by glib-mkenum into a compatibility
source file and we could also define the original COGL_ERROR_ enums for
compatibility too.
Note: another minor concern with cherry-picking this patch to the 1.14
branch is that an api scanner would be lead to believe that some APIs
have changed, and for example the gobject-introspection parser which
understands the semantics of GError will not understand the semantics of
CoglError. We expect most people that have tried to use
gobject-introspection with Cogl already understand though that it is not
well suited to generating bindings of the Cogl api anyway and we aren't
aware or anyone depending on such bindings for apis involving GErrors.
(GnomeShell only makes very-very minimal use of Cogl via the gjs
bindings for the cogl_rectangle and cogl_color apis.)
The main reason we have cherry-picked this patch to the 1.14 branch
even given the above concerns is that without it it would become very
awkward for us to cherry-pick other beneficial patches from master.
As part of an effort towards being able to write non-opengl based
backends for Cogl this moves most of the opengl specific code under
drivers/gl. drivers/gl and drivers/gles have been moved to
drivers/gl/gl and drivers/gl/es respectively.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 7dc482facb0a265c7f48660079e7e12dd7a2813e)
This splits out most of the OpenGL specific code from cogl-framebuffer.c
into cogl-framebuffer-gl.c and extends the CoglDriverVtable interface
for cogl-framebuffer.c to use.
There are hopes to support several different backends for Cogl
eventually to hopefully get us closer to the metal so this makes some
progress in organizing which parts of Cogl are OpenGL specific so these
parts can potentially be switched out later.
The only remaining use of OpenGL still in cogl-framebuffer.c is to
handle cogl_framebuffer_read_pixels.
This commit introduces some new framebuffer api to be able to
enable texture based depth buffers for a framebuffer (currently
only supported for offscreen framebuffers) and once allocated
to be able to retrieve the depth buffer as a texture for further
usage, say, to implement shadow mapping.
The API works as follow:
* Before the framebuffer is allocated, you can request that a depth
texture is created with
cogl_framebuffer_set_depth_texture_enabled()
* cogl_framebuffer_get_depth_texture() can then be used to grab a
CoglTexture once the framebuffer has been allocated.
This adds two new configuration environment variables:
COGL_DISABLE_GL_EXTENSIONS and
COGL_OVERRIDE_GL_VERSION
The variables can also be set in the cogl.conf file using the same
names.
The first one is a list of GL extension names separated by commas.
When set Cogl will assume any extension listed here is not available
by removing it from the string returned from
glGetString(GL_EXTENSIONS). If the string is set in both the config
file and the environment variable then the union of the two lists will
be used.
The second overrides the value returned from glGetString(GL_VERSION).
If the string is set in both places the version from the environment
variable will take priority.
These are sometimes useful for debugging Cogl to test the various
combinations of extensions. It could also be useful to work around
driver bugs where an extension is badly supported and it would be
better not to use it.
The variables in cogl-config that just set a global char * variable
have been put together in an array instead of having a separate blob
of code for each one in order to make it simpler to add new variables.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit ec69c2dc576c78664e0b73879365cb7414ecf441)
According to the EGL spec, eglGetProcAddress should only be used to
retrieve extension functions. It also says that returning non-NULL
does not mean the extension is available so you could interpret this
as saying that the function is allowed to return garbage for core
functions. This seems to happen at least for the Android
implementation of EGL.
To workaround this the winsys's are now passed down a flag to say
whether the function is from the core API. This information is already
in the gl-prototypes headers as the minimum core GL version and as a
pair of flags to specify whether it is available in core GLES1 and
GLES2. If the function is in core the EGL winsys will now avoid using
eglGetProcAddress and always fallback to querying the library directly
with the GModule API.
The GLX winsys is left alone because glXGetProcAddress apparently
supports querying core API and extension functions.
The WGL winsys could ideally be changed because wglGetProcAddress
should also only be used for extension functions but the situation is
slightly different because WGL considers anything from GL > 1.1 to be
an extension so it would need a bit more information to determine
whether to query the function directly from the library.
The SDL winsys is also left alone because it's not as easy to portably
determine which GL library SDL has chosen to load in order to resolve
the symbols directly.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 72089730ad06ccdd38a344279a893965ae68cec1)
Since we aren't able to break API on the 1.12 branch
cogl_get_proc_address is still supported but isn't easily able to
determine whether the given name corresponds to a core symbol or
not. For now we just assume the symbol being queried isn't part
of the core GL api and update the documentation accordingly.
Some drivers have good support for GLSL but don't have the complete
set of features needed to advertise GL 2.0 support. We should accept
the three old GLSL extensions (GL_ARB_shader_objects,
GL_ARB_vertex_shader and GL_ARB_fragment_shader) to support shaders on
these drivers.
This patch splits the shader functions into four sections :- those
that are provided only in GL 2.0, those that have the same name in the
shader objects extension, those that are provided by the vertex
shader extension (they all share the same name) and those that have a
different name in the shader objects extension.
If GL 2.0 is not supported but all three of the extensions are then
the pointers to the GL2-only functions will be replaced to point to
the equivalent functions from the extensions. That way the rest of the
Cogl source doesn't have to worry about the name differences.
https://bugzilla.gnome.org/show_bug.cgi?id=677078
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 71ecb51bd20dc3053b4221961b57e5a2b1029bdf)
Until now, we hardcoded the internal format to GL_RGBA and used the
internal format returned by pixel_format_to_gl() as the format for
checking the texture size and format we're asked to create.
Let's use the proper internal format/format from now on.
This is needed as a later patch introduces DEPTH and DEPTH_STENCIL
textures.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit ec45f60ee2545f88302da314bcdbe1439c4ba9c9)
This detects when we are running on any of Mesa's software rasterizer
backends and disables use of glBlitFramebuffer and glXCopySubBuffer.
Both of these currently result in full-screen copies so there's little
point in using these to optimize how much of the screen we present.
To help ensure we re-evaluate this workaround periodically we have added
a comment marker of "ONGOING BUG" above the workaround and added a note
to our RELEASING document that says we should grep for this marker and
write a NEWS section about ongoing bug workarounds.
https://bugzilla.gnome.org/show_bug.cgi?id=674208
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 11f2f6ebb42398978ec8dd92b3c332ae8140a728)
The coding style has for a long time said to avoid using redundant glib
data types such as gint or gchar etc because we feel that they make the
code look unnecessarily foreign to developers coming from outside of the
Gnome developer community.
Note: When we tried to find the historical rationale for the types we
just found that they were apparently only added for consistent syntax
highlighting which didn't seem that compelling.
Up until now we have been continuing to use some of the platform
specific type such as gint{8,16,32,64} and gsize but this patch switches
us over to using the standard c99 equivalents instead so we can further
ensure that our code looks familiar to the widest range of C developers
who might potentially contribute to Cogl.
So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this
switches all Cogl code to instead use the int{8,16,32,64}_t and
uint{8,16,32,64}_t c99 types instead.
Instead of gsize we now use size_t
For now we are not going to use the c99 _Bool type and instead we have
introduced a new CoglBool type to use instead of gboolean.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
Removing CoglHandle has been an on going goal for quite a long time now
and finally this patch removes the last remaining uses of the CoglHandle
type and the cogl_handle_ apis.
Since the big remaining users of CoglHandle were the cogl_program_ and
cogl_shader_ apis which have replaced with the CoglSnippets api this
patch removes both of these apis.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0)
Since the original patch was done after removing deprecated API
this back ported patch doesn't affect deprecated API and so
actually this cherry-pick doesn't remove all remaining use of
CoglHandle as it did for the master branch of Cogl.
The Intel driver currently has an optimisation when calling
glReadPixels into a PBO so that it will use a blit instead of the Mesa
fallback path. However this only works if the GL_PACK_ALIGNMENT is
exactly 1, even if this would be equivalent to a higher alignment
value because the bpp*width is already aligned. To make it more likely
to hit this fast path, we now detect this situation and explicitly use
an alignment of 1. To make this work the texture driver needs to be
passed down the bpp*width as well as the rowstride when configuring
the alignment.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
GL_ARB_sampler_objects provides a GL object which overrides the
sampler state part of a texture object with different values. The
sampler state that Cogl currently exposes is the wrap modes and
filters. Cogl exposes the state as part of the pipeline layer state
but without this extension GL only exposes it as part of the texture
object state. This means that it won't work to use a single texture
multiple times in one primitive with different sampler states. It also
makes switching between different sampler states with a single texture
not terribly efficient because it has to change the texture object
state every time.
This patch adds a cache for sampler states in a shared hash table
attached to the CoglContext. The entire set of parameters for the
sampler state is used as the key for the hash table. When a unique
state is encountered the sampler cache will create a new entry,
otherwise it will return a const pointer to an existing entry. That
means we can have a single pointer to represent any combination of
sampler state.
Pipeline layers now just store this single pointer rather than storing
all of the sampler state. The two separate state flags for wrap modes
and filters have now been combined into one. It should be faster to
compare the sampler state now because instead of comparing each value
it can just compare the pointers to the cached sampler entries. The
hash table of cached sampler states should only need to perform its
more expensive hash on the state when a property is changed on a
pipeline, not every time it is flushed.
When the sampler objects extension is available each cached sampler
state will also get a sampler object to represent it. The common code
to flush the GL state will now simply bind this object to a unit
instead of flushing the state though the CoglTexture when possible.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Cogl already had a vtable for the texture driver. This ended up being
used for some things that are not strictly related to texturing such
as converting between pixel formats and GL enums. Some other functions
that are driver dependent such as updating the features were not
indirected through a vtable but instead switched directly by looking
at the ctx->driver enum value. This patch normalises to the two uses
by adding a separate vtable for driver functions not related to
texturing and moves the pixel format conversion functions to it from
the texture driver vtable. It also adds a context parameter to all of
the functions in the new driver vtable so that they won't have to rely
on the global context.
The assert could use a 'default:' label but that would stop GCC from
giving a warning when a new enum value is added.
https://bugzilla.gnome.org/show_bug.cgi?id=671016
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The GL_DEPTH_STENCIL format for renderbuffers is defined in a separate
extension from GL_EXT_framebuffer_object so we probably shouldn't
being trying to use it unless that extension is advertised. This just
replaces the check for whether the driver is GL for a check for a
private feature flag before trying GL_DEPTH_STENCIL. The private
feature flag is set if the extension is available on GL.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The cogl.h header is meant to be the public header for including the 1.x
api used by Clutter so we should stop using that as a convenient way to
include all likely prototypes and typedefs. Actually we already do a
good job of listing the specific headers we depend on in each of the .c
files we have so mostly this patch just strip out the redundant
includes for cogl.h with a few fixups where that broke the build.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The _cogl_texture_driver_pixel_format_to_gl functions for OpenGL and
OpenGLES convert CoglPixelFormats into corresponding gl enums that can
be used to upload texture data. Previously we were only handling a few
specific formats but this patch updates the functions to handle all the
formats we know about. The functions now also switch() on the format so
that we will get build time warnings if we forget to handle new formats
in these functions.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=660188
edit: tweaked the internal format returned by pixel_format_to_gl();
handled 1010102 formats and rebased -- Robert Bragg
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This moves _cogl_get_format_bpp from cogl-bitmap.c to cogl.c and renames
it to _cogl_pixel_format_get_bytes_per_pixel. This makes it clearer that
it doesn't return bits per pixel and makes the naming consistent with
other cogl api. The prototype has been moved to cogl-private.h since it
seems we should be aiming to get rid of cogl-internal.h at some point.
The patch also adds a simple gtk-doc comment since we might want to make
this api public.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds COGL_PIPELINE_WRAP_MODE_MIRRORED_REPEAT enum so that mirrored
texture repeating can be used. This also adds support for emulating the
MIRRORED_REPEAT mode via the cogl-spans API so it can also be used with
meta textures such as sliced and atlas textures.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Currently features are represented as bits in a 32bit mask so we
obviously can't have more than 32 features with that approach. The new
approach is to use the COGL_FLAGS_ macros which lets us handle bitmasks
without a size limit and we change the public api to accept individual
feature enums instead of a mask. This way there is no limit on the
number of features we can add to Cogl.
Instead of using cogl_features_available() there is a new
cogl_has_feature() function and for checking multiple features there is
cogl_has_features() which takes a zero terminated vararg list of
features.
In addition to being able to check for individual features this also
adds a way to query all the features currently available via
cogl_foreach_feature() which will call a callback for each feature.
Since the new functions take an explicit context pointer there is also
no longer any ambiguity over when users can first start to query
features.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Cogl provides a consistent public interface regardless of whether the
underlying GL driver supports VBOs so it doesn't make much sense to have
this feature as part of the public api. We can't break the api by
removing the enum but at least we no longer ever set the feature flag.
We now have a replacement private feature flag COGL_PRIVATE_FEATURE_VBOS
which cogl now checks for internally.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Cogl provides a consistent public interface regardless of whether the
underlying GL driver supports PBOs so it doesn't make much sense to have
this feature as part of the public api. We can't break the api by
removing the enum but at least we no longer ever set the feature flag.
We now have a replacement private feature flag COGL_PRIVATE_FEATURE_PBOS
which cogl now checks for internally.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Cogl doesn't currently expose public api for clip planes so it
doesn't make much sense to have this feature as part of the public api.
We can't break the api by removing the enum but at least we no longer
ever set the feature flag.
We now have a replacement private feature flag
COGL_PRIVATE_FEATURE_FOUR_CLIP_PLANES which cogl now checks for
internally.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Cogl doesn't expose public api for blitting between framebuffers so it
doesn't make much sense to have this feature as part of the public api
currently. We can't break the api by removing the enum but at least we
no longer ever set the feature flag.
We now have a replacement private feature flag
COGL_PRIVATE_FEATURE_OFFSCREEN_BLIT which cogl now checks for
internally.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Although we have to leave the COGL_FEATURE_STENCIL_BUFFER enum as part
of the public api we no longer ever set this feature flag.
Cogl doesn't currently expose the concept of a stencil buffer in the
public api (we only indirectly expose it via the clip stack api) so it
doesn't make much sense to have a stencil buffer feature flag.
We now have a COGL_PRIVATE_FEATURE_STENCIL_BUFFER flag instead which
we can check when we need to use the buffer for clipping.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Actual support for yuv textures isn't fully plumbed into Cogl currently
so the check for GL_MESA_ycbcr_texture is meaningless. For now we just
remove the check.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds support for multisample rendering to offscreen framebuffers.
After an offscreen framebuffer is first instantiated using
cogl_offscreen_new_to_texture() it is then possible to use
cogl_framebuffer_set_samples_per_pixel() to request multisampling before
the framebuffer is allocated. This also adds
cogl_framebuffer_resolve_samples() for explicitly resolving point
samples into pixels. Even though we currently only support the
IMG_multisampled_render_to_texture extension which doesn't require an
explicit resolve, the plan is to also support the
EXT_framebuffer_multisample extension which uses the framebuffer_blit
extension to issue an explicit resolve.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The check for the point sprite feature got lost when the feature
functions header was combined for GL and GLES in dae02a99a.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously, _cogl_get_proc_address had a fallback to resolve the
symbol using g_module_open(NULL) to get the symbol from anywhere in
the address space. The EGL backend ends up using this on some drivers
because eglGetProcAddress isn't meant to return a pointer for core
functions. This causes problems if something in the process is linking
against a different GL library, for example Cairo may be linking
against libGL itself. In this case it may end up resolving symbols
from the GL library even if GLES is being used.
This patch removes the fallback. The EGL version now has its own
fallback instead which passes the existing libgl_module from the
renderer to g_module_symbol so that it should only get symbols from
that library or its dependency chain. The GLX and WGL winsys only call
glXGetProcAddress and wglGetProcAddress. The stub winsys does however
continue using the global symbol lookup.
The internal _cogl_get_proc_address function has been renamed to
_cogl_renderer_get_proc_address because it needs a connected renderer
to work so it could be considered to be a renderer method. The pointer
to the renderer is passed down to the winsys backends so that it can
use the data attached to the renderer to get the module pointers.
https://bugzilla.gnome.org/show_bug.cgi?id=655412
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The _cogl_context_check_gl_version function is meant to be called once
Cogl has a GL context so that it can check whether the context found
is supported by Cogl. However, only the stub winsys was calling this
and it was doing it before Cogl had a chance to retrieve the function
pointer for glString so it would just crash. This patch combines the
two functions into one so that _cogl_context_update_features returns a
gboolean and a GError. Then it can just check the context itself.
https://bugzilla.gnome.org/show_bug.cgi?id=654440
Reviewed-by: Robert Bragg <robert@linux.intel.com>
cogl_read_pixels returns image data in a top-down memory order, but
because OpenGL normally returns pixel data in a bottom-up order we
have to flip the data before returning it to the user. If the OpenGL
driver supports the GL_MESA_pack_invert extension though we can ask the
driver to return the data in a top-down order in the first place.
Signed-off-by: Neil Roberts <neil@linux.intel.com>
The GL or GLES library is now dynamically loaded by the CoglRenderer
so that it can choose between GL, GLES1 and GLES2 at runtime. The
library is loaded by the renderer because it needs to be done before
calling eglInitialize. There is a new environment variable called
COGL_DRIVER to choose between gl, gles1 or gles2.
The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have
been changed so that they don't assume the ifdefs are mutually
exclusive. They haven't been removed entirely so that it's possible to
compile the GLES backends without the the enums from the GL headers.
When using GLX the winsys additionally dynamically loads libGL because
that also contains the GLX API. It can't be linked in directly because
that would probably conflict with the GLES API if the EGL is
selected. When compiling with EGL support the library links directly
to libEGL because it doesn't contain any GL API so it shouldn't have
any conflicts.
When building for WGL or OSX Cogl still directly links against the GL
API so there is a #define in config.h so that Cogl won't try to dlopen
the library.
Cogl-pango previously had a #ifdef to detect when the GL backend is
used so that it can sneakily pass GL_QUADS to
cogl_vertex_buffer_draw. This is now changed so that it queries the
CoglContext for the backend. However to get this to work Cogl now
needs to export the _cogl_context_get_default symbol and cogl-pango
needs some extra -I flags to so that it can include
cogl-context-private.h
The texture driver functions are now accessed through a vtable pointed
to by a struct in the CoglContext so that eventually it will be
possible to compile both the GL and GLES texture drivers into a single
binary and then select between them at runtime.
Since the GL function pointers have move to the root of CoglContext,
the driver specific data for GLES became empty and the GL data had
only one varible which apparently nothing was using. It's therefore
convenient to remove the private driver data to make it easier to have
a build of Cogl which enables both GL and GLES support. If we ever
need driver private data later we might want to use
cogl_object_set_user_data instead.
cogl-ext-functions.h now contains definitions for all of the core GL
and GLES functions that we would normally link to directly. All of the
code has changed to access them through the cogl context pointer. The
GE macro now takes an extra parameter to specify the context because
the macro itself needs to make GL calls but various points in the Cogl
source use different names for the context variable.
