The GL3 context is created using the glXCreateContextAttribs function
which is part of the GLX_ARB_create_context extension. However
previously the function pointers from GLX extensions were only
retrieved once the GL context is created. That meant that the GL3
context creation function would always assume that the extension is
not supported so it would always fail.
This patch changes it to query the functions when the renderer is set
up instead. The base winsys feature flags that are determined while
querying the functions are stored in a member of CoglGLXRenderer.
These are then copied to the CoglContext when it is initialised.
The spec for glXGetProcAddress says that the functions returned are
context-independent. That implies that it is safe to call it without
binding a context although that is not explicitly stated as far as I
can tell. A big of googling finds this DRI documentation which says it
can be used without a context:
http://dri.freedesktop.org/wiki/glXGetProcAddressNeverReturnsNULL
And also this code sample:
http://www.opengl.org/wiki/Tutorial:_OpenGL_3.0_Context_Creation_%28GLX%29
One point that makes me concerned that this might not always work in
practice is that the code in SDL2 to create a GL3 context first
creates a dummy GL2 context in order to have something bound before it
calls glXGetProcAddress. I think this may just be a misunderstanding
based on how wglGetProcAddress works however.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 04a7aca9a98e84e43ac5559305a1358112902e30)
Consistent with how we lazily allocate framebuffers this patch allows us
to instantiate textures but still specify constraints and requirements
before allocating storage so that we can be sure to allocate the most
appropriate/efficient storage.
This adds a cogl_texture_allocate() function that is analogous to
cogl_framebuffer_allocate() which can optionally be called to explicitly
allocate storage and catch any errors. If this function isn't used
explicitly then Cogl will implicitly ensure textures are allocated
before the storage is needed.
It is generally recommended to rely on lazy storage allocation or at
least perform explicit allocation as late as possible so Cogl can be
fully informed about the best way to allocate storage.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 1fa7c0f10a8a03043e3c75cb079a49625df098b7)
Note: This reverts the cogl_texture_rectangle_new_with_size API change
that dropped the CoglError argument and keeps the semantics of
allocating the texture immediately. This is because Mutter currently
uses this API so we will probably look at updating this later once
we have a corresponding Mutter patch prepared. The other API changes
were kept since they only affected experimental api.
There was a lot of redundancy in how we tracked the width and height of
different texture types which is greatly simplified by adding width and
height members to CoglTexture directly and removing the get_width and
get_height vfuncs from CoglTextureVtable
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 3236e47723e4287d5e0023f29083521aeffc75dd)
This moves the _cogl_texture_get_gl_format function from cogl-texture.c
to cogl-texture-gl.c and renames it _cogl_texture_gl_get_format.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit f8deec01eff7d8d9900b509048cf1ff1c86ca879)
This remove cogl-internal.h in favour of using cogl-private.h. Some
things in cogl-internal.h were moved to driver/gl/cogl-util-gl-private.h
and the _cogl_gl_error_to_string function whose prototype was moved from
cogl-internal.h to cogl-util-gl-private.h has had its implementation
moved from cogl.c to cogl-util-gl.c
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 01cc82ece091aa3bec4c07fdd6bc9e5135fca573)
Cogl always needs to have the context bound to something so that it
can freely create resources such as textures even if there is no
current window. When the currently bound SDLWindow is destroyed, SDL
apparently explicitly unbinds the GL context. If something then later
for example tries to create a texture Cogl would start getting GL
errors and fail. To fix this the SDL winsys now just binds the dummy
window before deiniting the currently bound onscreen.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 2c0cfdefbb9d1ac5097d98887d3581b67a324fae)
cogl_texture_set_region() and cogl_texture_set_region_from_bitmap() now
have a level argument so image data can be uploaded to a specific mipmap
level.
The prototype for cogl_texture_set_region was also updated to simplify
the arguments.
The arguments for cogl_texture_set_region_from_bitmap were reordered to
be consistent with cogl_texture_set_region with the source related
arguments listed first followed by the destination arguments.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 3a336a8adcd406b53731a6de0e7d97ba7932c1a8)
Note: Public API changes were reverted in cherry-picking this patch
Removes some (not all) use of _COGL_GET_CONTEXT() from cogl-winsys-glx.c
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 698a131c4991e4393ce966b968637fba194f252c)
This adds a driver/gl/cogl-texture-gl.c file and moves some gl specific
bits from cogl-texture.c into it. The moved symbols were also given a
_gl_ infix and the calling code was updated accordingly.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 2c9e81de70cc02d72b1ce9013c49e39300a05b6a)
This allows apps to catch out-of-memory errors when allocating textures.
Textures can be pretty huge at times and so it's quite possible for an
application to try and allocate more memory than is available. It's also
very possible that the application can take some action in response to
reduce memory pressure (such as freeing up texture caches perhaps) so
we shouldn't just automatically abort like we do for trivial heap
allocations.
These public functions now take a CoglError argument so applications can
catch out of memory errors:
cogl_buffer_map
cogl_buffer_map_range
cogl_buffer_set_data
cogl_framebuffer_read_pixels_into_bitmap
cogl_pixel_buffer_new
cogl_texture_new_from_data
cogl_texture_new_from_bitmap
Note: we've been quite conservative with how many apis we let throw OOM
CoglErrors since we don't really want to put a burdon on developers to
be checking for errors with every cogl api call. So long as there is
some lower level api for apps to use that let them catch OOM errors
for everything necessary that's enough and we don't have to make more
convenient apis more awkward to use.
The main focus is on bitmaps and texture allocations since they
can be particularly large and prone to failing.
A new cogl_attribute_buffer_new_with_size() function has been added in
case developers need to catch OOM errors when allocating attribute buffers
whereby they can first use _buffer_new_with_size() (which doesn't take a
CoglError) followed by cogl_buffer_set_data() which will lazily allocate
the buffer storage and report OOM errors.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit f7735e141ad537a253b02afa2a8238f96340b978)
Note: since we can't break the API for Cogl 1.x then actually the main
purpose of cherry picking this patch is to keep in-line with changes
on the master branch so that we can easily cherry-pick patches.
All the api changes relating stable apis released on the 1.12 branch
have been reverted as part of cherry-picking this patch so this most
just applies all the internal plumbing changes that enable us to
correctly propagate OOM errors.
This fixes some problems which were stopping --disable-glib from
working properly:
• A lot of the public headers were including glib.h. This shouldn't be
necessary because the API doesn't expose any glib types. Otherwise
any apps would require glib in order to get the header.
• The public headers were using G_BEGIN_DECLS. There is now a
replacement macro called COGL_BEGIN_DECLS which is defined in
cogl-types.h.
• A similar fix has been done for G_GNUC_NULL_TERMINATED and
G_GNUC_DEPRECATED.
• The CFLAGS were not including $(builddir)/deps/glib which was
preventing it finding the generated glibconfig.h when building out
of tree.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 4138b3141c2f39cddaea3d72bfc04342ed5092d0)
This adds a function to get a pointer to the SDL_Window associated
with a CoglOnscreen when using the SDL2 winsys.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 071f4b80daa8a2f967746a30b3acf014d74f781a)
The SDL 1 winsys now checks for the initial resizable state of the
onscreen framebuffer when it is allocated and updates the video flags
accordingly.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit f5fb9be70a92f751886a94da0b34e14252ed197e)
The SDL2 winsys will now set the SDL_WINDOW_RESIZABLE flag on the
window before creating it if the resizable property is set on the
onscreen. Note that there doesn't appear to be a way in SDL to change
the flag later so unlike the other winsyses it will only take affect
if it is set before allocating the framebuffer.
The winsys now registers a callback for SDL events so that it can
report window size changes back to the application.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 0dea9aeb897faf029828379b120970477df3c7d5)
The check to verify whether we've got the right GL context was
checking that the GL version was less than 3 whenever the non-GL3
driver is used. However it looks like the driver is free to return a
GL3 context that is compatible with GL2 if GL2 is requested so this
was breaking the GL2 driver.
This also adds the necessary SDL attributes to request a forward
compatible core context like the GLX and EGL winsys's do. I haven't
actually tested this because it looks like SDL will only create a GL
context with GLX and I haven't got a recent enough X server to handle
the glXCreateContextAttribs request.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit d46acafa3ea7ba2e6c4ac7a45f00a132df1b2872)
The SDL2 winsys was using _cogl_set_error without including its header
so it was giving an annoying warning. This patch also fixes some
indentation issues.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 9c8433087b7573f7606dfae2bae3045803ead115)
This adds a new CoglDriver for GL 3 called COGL_DRIVER_GL3. When
requested, the GLX, EGL and SDL2 winsyss will set the necessary
attributes to request a forward-compatible core profile 3.1 context.
That means it will have no deprecated features.
To simplify the explosion of checks for specific combinations of
context->driver, many of these conditionals have now been replaced
with private feature flags that are checked instead. The GL and GLES
drivers now initialise these private feature flags depending on which
driver is used.
The fixed function backends now explicitly check whether the fixed
function private feature is available which means the GL3 driver will
fall back to always using the GLSL progend. Since Rob's latest patches
the GLSL progend no longer uses any fixed function API anyway so it
should just work.
The driver is currently lower priority than COGL_DRIVER_GL so it will
not be used unless it is specificly requested. We may want to change
this priority at some point because apparently Mesa can make some
memory savings if a core profile context is used.
In GL 3, getting the combined extensions string with glGetString is
deprecated so this patch changes it to use glGetStringi to build up an
array of extensions instead. _cogl_context_get_gl_extensions now
returns this array instead of trying to return a const string. The
caller is expected to free the array.
Some issues with this patch:
• GL 3 does not support GL_ALPHA format textures. We should probably
make this a feature flag or something. Cogl uses this to render text
which currently just throws a GL error and breaks so it's pretty
important to do something about this before considering the GL3
driver to be stable.
• GL 3 doesn't support client side vertex buffers. This probably
doesn't matter because CoglBuffer won't normally use malloc'd
buffers if VBOs are available, but it might but worth making
malloc'd buffers a private feature and forcing it not to use them.
• GL 3 doesn't support the default vertex array object. This patch
just makes it create and bind a single non-default vertex array
object which gets used just like the normal default object. Ideally
it would be good to use vertex array objects properly and attach
them to a CoglPrimitive to cache the state.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 66c9db993595b3a22e63f4c201ea468bc9b88cb6)
The EGL winsys had a special case code path when trying to create a
context where if it failed it would try again except without requesting
a stencil buffer. Historically this code path was to allow Clutter to
run on PowerVR MBX hardware which doesn't support a stencil buffer. It
doesn't really make sense to keep this workaround in Cogl as it would
leave Cogl in a state where the clip stack doesn't work without
providing any feedback to the developer. If we need to support running
on MBX like hardware - probably not very likely these days - then we
should provide developer control over the stencil buffer so the
equivalent workaround could be implemented on top of Cogl.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit a7c391a985e82707b17f2fb1105de5d37822a390)
The function pointer for texture_2d_get_data in the driver vtable was
expecting an unsigned int for the rowstride but the definition in
cogl-texture-2d-gl.c took a size_t so it was giving an annoying
warning. This normalizes them both to just take an int. This seems to
better match the pattern used for cogl_bitmap_new_from_data and
cogl_texture_2d_new_from_data.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 003f080531d5368835081568779b031ef4f09a77)
This renames the set_filters and set_wrap_mode_parameters texture
virtual functions to gl_flush_legacy_texobj_filters and
gl_flush_legacy_texobj_wrap_modes respectively to clarify that they are
opengl driver specific and that they are only used to support the legacy
opengl apis for setting filters and wrap modes where the state is
associated with texture objects instead of being associated with sampler
objects.
This part of an effort to clearly delimit our abstraction over opengl so
that we can start to consider non-opengl backends for Cogl.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 6f78b8a613340d7c6b736e51a16c625f52154430)
Although we use GLib internally in Cogl we would rather not leak GLib
api through Cogl's own api, except through explicitly namespaced
cogl_glib_ / cogl_gtype_ feature apis.
One of the benefits we see to not leaking GLib through Cogl's public API
is that documentation for Cogl won't need to first introduce the Glib
API to newcomers, thus hopefully lowering the barrier to learning Cogl.
This patch provides a Cogl specific typedef for reporting runtime errors
which by no coincidence matches the typedef for GError exactly. If Cogl
is built with --enable-glib (default) then developers can even safely
assume that a CoglError is a GError under the hood.
This patch also enforces a consistent policy for when NULL is passed as
an error argument and an error is thrown. In this case we log the error
and abort the application, instead of silently ignoring it. In common
cases where nothing has been implemented to handle a particular error
and/or where applications are just printing the error and aborting
themselves then this saves some typing. This also seems more consistent
with language based exceptions which usually cause a program to abort if
they are not explicitly caught (which passing a non-NULL error signifies
in this case)
Since this policy for NULL error pointers is stricter than the standard
GError convention, there is a clear note in the documentation to warn
developers that are used to using the GError api.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46)
Note: Since we can't change the Cogl 1.x api the patch was changed to
not rename _error_quark() functions to be _error_domain() functions and
although it's a bit ugly, instead of providing our own CoglError type
that's compatible with GError we simply #define CoglError to GError
unless Cogl is built with glib disabled.
Note: this patch does technically introduce an API break since it drops
the cogl_error_get_type() symbol generated by glib-mkenum (Since the
CoglError enum was replaced by a CoglSystemError enum) but for now we
are assuming that this will not affect anyone currently using the Cogl
API. If this does turn out to be a problem in practice then we would be
able to fix this my manually copying an implementation of
cogl_error_get_type() generated by glib-mkenum into a compatibility
source file and we could also define the original COGL_ERROR_ enums for
compatibility too.
Note: another minor concern with cherry-picking this patch to the 1.14
branch is that an api scanner would be lead to believe that some APIs
have changed, and for example the gobject-introspection parser which
understands the semantics of GError will not understand the semantics of
CoglError. We expect most people that have tried to use
gobject-introspection with Cogl already understand though that it is not
well suited to generating bindings of the Cogl api anyway and we aren't
aware or anyone depending on such bindings for apis involving GErrors.
(GnomeShell only makes very-very minimal use of Cogl via the gjs
bindings for the cogl_rectangle and cogl_color apis.)
The main reason we have cherry-picked this patch to the 1.14 branch
even given the above concerns is that without it it would become very
awkward for us to cherry-pick other beneficial patches from master.
glBlitFramebuffer is affected by the scissor so we need to ensure
there is an empty clip flushed before using it. This is similar to
what is done in _cogl_blit_framebuffer().
https://bugzilla.gnome.org/show_bug.cgi?id=690451
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Tested-by: Aaron Plattner <aplattner@nvidia.com>
(cherry picked from commit 65da3f88af9c7b8d72758d116c2652aff68195c1)
The ‘length’ for the swap chain is initially -1 which is supposed to
mean ‘no preference’. However, both of the SDL winsys's were
explicitly setting the SDL_GL_DOUBLEBUFFER attribute to zero in that
case which would try to disable double buffering.
On OS X, the equivalent to eglSwapBuffers (ie, [NSOpenGLContext
flushBuffer]) does nothing for a single buffer context. The
cogl-sdl-hello example does not specify the swap chain length so
presumably it would end up with a single buffer config. When
cogl_onscreen_swap_buffers is called it therefore does nothing and
nothing is painted.
I guess to make single-buffered contexts actually useful we should
expose some public equivalent to glFlush so that you can ensure the
rendering commands will actually hit the buffer. Alternatively we
could document that cogl_onscreen_swap_buffers performs this task on
single-buffered configs and then we could make the SDL winsys
explicitly call glFlush in that case.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 71e57f99002d5dee79bbd44b3bc57712b99acb55)
Previously when pushing the GLES2 context with an onscreen framebuffer
it would just call bind_onscreen. This actually binds it with Cogl's
context so presumably the context isolation wasn't working properly.
This patch splits out bind_onscreen to have a second function called
bind_onscreen_with_context that explicitly takes the EGL context to
use. Cogl now uses this when pushing the GLES2 context.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 3653c5b10058a3f79900eb2644cb30f4cf1ca47e)
Previously, Cogl was advertising the GLES2 context feature whenever
the EGL winsys was used, even if the winsys was used with the GL
driver. This wasn't working because when the GL context is created the
API is set to GL with eglBindAPI and it is never changed back to GLES
when the GLES2 context is created. That meant that the created context
is actually GL not GLES2. Any rendering would then fail because the GL
context does not understand the precision statement.
It could be possible to fix it so that it will set the API correctly
before creating the context. It would then also need to reset the API
and unbind the previous context whenever switching between GLES2 and
GL contexts. If the context isn't unbound first then eglMakeCurrent
will actually try to bind both contexts at the same time and at least
Mesa detects this situation and reports that the two contexts
conflict. Presumably we would also need to do something more clever
when we retrieve the function pointers for the GLES2 context.
Currently we just copy them from the CoglContext but if the context is
using the GL driver then this would mean the functions came from libGL
not libGLESv2.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 624dea207cf76ae9ccd7f57c4ebd15d3bd65bff0)
Previously when Cogl detects that the GLX context is indirect it
resets the function pointers for the VBLANK_COUNTER feature to NULL.
However it wasn't removing the VBLANK_COUNTER feature flag. Some other
parts of the winsys check for that feature flag rather than checking
whether the pointer is NULL so it would end up calling an invalid
function pointer and crashing. This just fixes it to also clear the
feature flag.
https://bugzilla.gnome.org/show_bug.cgi?id=684917
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit e947c713a541086f80a308d22774229f0720196a)
As part of our on-going goal to remove our dependence on a global Cogl
context this patch adds a pointer to the context to each CoglTexture
so that the various texture apis no longer need to use
_COGL_GET_CONTEXT.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 83131072eea395f18ab0525ea2446f443a6033b1)
The check for whether to use ‘stride’ instead of ‘pitch’ from the GBM
API tries to check whether the GBM version is >= 8.1.0. However it was
comparing the major and micro components independently so any version
with the minor part set to 0 would fail. The GBM version in Mesa
master is now 9.0.0 which breaks it. This patch changes it to check
the version using the COGL_VERSION_ENCODE macro instead.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 38f1dc58b35023f9e6bbc0db746b1554bd0377fc)
gbm_bo_get_pitch was renamed to gbm_bo_get_stride to be consistent with
how the terms pitch and stride are used throughout mesa. This updates
the Cogl backend to use the new gbm_bo_get_stride name.
For compatibility with previous version of libgbm we now explicitly
check the version of libgbm in configure.ac and expose
COGL_GBM_{MAJOR,MINOR,MICRO} defines to the code so we can conditionally
use the older gbm_bo_get_pitch() name with older versions.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 47c6247095e2f1f8725c4eb08d38c9de15e283cd)
The surfaceless extension that Mesa advertises has been renamed to
EGL_KHR_surfaceless_context instead of a separate extension for the
GLES, GLES2 and GL APIs and the new extension has been ratified by
Khronos. Therefore the KMS backend no longer runs against Mesa master.
We could just rename the extension we check for, however Weston (the
sample Wayland compositor) has switched to just creating a dummy GBM
surface and not using the surfaceless extension at all. We should
probably do the same thing.
Using the surfaceless extension could be a good idea but we don't
really need to rely on it for KMS and we would want to do it for all
EGL backends, not just the KMS backend.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit d4f22f8cb013d417c99ba03924538924191c2fe6)
This function should take an extra third paramter to specify whether
the procedure is in core or not. The parameter is not used so this
patch just fixes an annoying warning.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit eed4ac80cd8c3fa1859493c9bb00547038be6095)
This just gets rid of some annoying warnings.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 3d0aea04d1f6a8094b749e20a59d8a9a95a6235e)
This adds two new configuration environment variables:
COGL_DISABLE_GL_EXTENSIONS and
COGL_OVERRIDE_GL_VERSION
The variables can also be set in the cogl.conf file using the same
names.
The first one is a list of GL extension names separated by commas.
When set Cogl will assume any extension listed here is not available
by removing it from the string returned from
glGetString(GL_EXTENSIONS). If the string is set in both the config
file and the environment variable then the union of the two lists will
be used.
The second overrides the value returned from glGetString(GL_VERSION).
If the string is set in both places the version from the environment
variable will take priority.
These are sometimes useful for debugging Cogl to test the various
combinations of extensions. It could also be useful to work around
driver bugs where an extension is badly supported and it would be
better not to use it.
The variables in cogl-config that just set a global char * variable
have been put together in an array instead of having a separate blob
of code for each one in order to make it simpler to add new variables.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit ec69c2dc576c78664e0b73879365cb7414ecf441)
Someone trying to compile cogl (ThijsNL on irc0 for the Rasberry Pi
stumbled into that one. GLXDrawable may not be defined in a pure EGL/X
environment.
Change it to Window, the type used for XConfigureEvent.window.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit f05d6923fff28b1d167a391d486e319743c49215)
Otherwise, X11 identifiers may leak and cause havoc in big applications
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit ed0cdca0eca815543619fe72fbd42d662d53f92d)
This adds api to be able to request that the window system allows a
given onscreen framebuffer to be resizable, and api to add and remove
resize handlers to be called whenever the framebuffer does actually
change size.
The new functions are:
cogl_onscreen_{get,set}_resizable()
cogl_onscreen_{add,remove}_resize_handler()
The examples cogl-hello and cogl-x11-foreign have been updated to use
the new api. To smoke test how Cogl updates the viewport automatically
in response to window resizes the cogl-hello test doesn't explicitly
respond to resize events by setting the viewport and cogl-x11-foreign
responds by setting a viewport that is offset by a quarter of the
window's width/height and half the width and height of the window.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit a1a8cc00bfa2cecaf1007aec5f3dd95dc07b1786)
According to the EGL spec, eglGetProcAddress should only be used to
retrieve extension functions. It also says that returning non-NULL
does not mean the extension is available so you could interpret this
as saying that the function is allowed to return garbage for core
functions. This seems to happen at least for the Android
implementation of EGL.
To workaround this the winsys's are now passed down a flag to say
whether the function is from the core API. This information is already
in the gl-prototypes headers as the minimum core GL version and as a
pair of flags to specify whether it is available in core GLES1 and
GLES2. If the function is in core the EGL winsys will now avoid using
eglGetProcAddress and always fallback to querying the library directly
with the GModule API.
The GLX winsys is left alone because glXGetProcAddress apparently
supports querying core API and extension functions.
The WGL winsys could ideally be changed because wglGetProcAddress
should also only be used for extension functions but the situation is
slightly different because WGL considers anything from GL > 1.1 to be
an extension so it would need a bit more information to determine
whether to query the function directly from the library.
The SDL winsys is also left alone because it's not as easy to portably
determine which GL library SDL has chosen to load in order to resolve
the symbols directly.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 72089730ad06ccdd38a344279a893965ae68cec1)
Since we aren't able to break API on the 1.12 branch
cogl_get_proc_address is still supported but isn't easily able to
determine whether the given name corresponds to a core symbol or
not. For now we just assume the symbol being queried isn't part
of the core GL api and update the documentation accordingly.
This adds an alternate version of the SDL winsys using the SDL 2 API.
The two versions are mutually exclusive and share the same
CoglWinsysID. Version 2 of SDL fits a little bit better with Cogl
because it supports multiple windows and the video subsystem can be
initialised entirely independently of the rest of the subsystems.
The SDL2 winsys creates an invisible dummy window in order to bind the
GL context after creating the Cogl display. This is similar to how the
X11 winsys's work.
SDL2 seems to support compiling with support for both GL and GLES.
However there doesn't seem to be a way to select between the two
backends outside of SDL. In fact if you do compile them both in it
seems to break down because it will always try to use the window
system functions from the GLES backend because those are filled in
second in the vtable. However when creating the window it will always
prefer to use the GL function to choose a visual. This function gets
confused because the GL backend has not been initialised at that
point. The Cogl backend therefore just leaves it up to SDL to pick a
sensible backend. It will then verify that it picked a GL library
which matches the Cogl driver by checking the string from
glGetString(GL_VERSION).
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 6cb5ab41355e7bfe28f367cf4afa39a7afcfeec2)
This adds a new renderer constraint enum:
COGL_RENDERER_CONSTRAINT_SUPPORTS_GLES2_CONTEXT
that can be used by applications to ensure the renderer they connect to
has support for creating a GLES2 context via cogl_gles2_context_new().
The cogl-gles2-context and cogl-gles2-gears examples and the conformance
tests have been updated to use this constraint.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit ed61463d7194354b26624e8014859f0fbfc06a12)
This makes it possible to integrate existing GLES2 code with
applications using Cogl as the rendering api.
Currently all GLES2 usage is handled with separate GLES2 contexts to
ensure that GLES2 api usage doesn't interfere with Cogl's own use of
OpenGL[ES]. The api has been designed though so we can provide tighter
integration later.
The api would allow us to support GLES2 virtualized on top of an
OpenGL/GLX driver as well as GLES2 virtualized on the core rendering api
of Cogl itself. Virtualizing the GLES2 support on Cogl will allow us to
take advantage of Cogl debugging facilities as well as let us optimize
the cost of allocating multiple GLES2 contexts and switching between
them which can both be very expensive with many drivers.
As as a side effect of this patch Cogl can also now be used as a
portable window system binding API for GLES2 as an alternative to EGL.
Parts of this patch are based on work done by Tomeu Vizoso
<tomeu.vizoso@collabora.com> who did the first iteration of adding GLES2
API support to Cogl so that WebGL support could be added to
webkit-clutter.
This patch adds a very minimal cogl-gles2-context example that shows how
to create a gles2 context, clear the screen to a random color and also
draw a triangle with the cogl api.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 4bb6eff3dbd50d8fef7d6bdbed55c5aaa70036a8)
This detects when we are running on any of Mesa's software rasterizer
backends and disables use of glBlitFramebuffer and glXCopySubBuffer.
Both of these currently result in full-screen copies so there's little
point in using these to optimize how much of the screen we present.
To help ensure we re-evaluate this workaround periodically we have added
a comment marker of "ONGOING BUG" above the workaround and added a note
to our RELEASING document that says we should grep for this marker and
write a NEWS section about ongoing bug workarounds.
https://bugzilla.gnome.org/show_bug.cgi?id=674208
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 11f2f6ebb42398978ec8dd92b3c332ae8140a728)
The stock 1.2.x version of SDL only supports regular OpenGL. The
version on WebOS is specially patched to add some extra API to request
a GLES1 or GLES2 context. This patch adds a configure check to detect
when Cogl is being built with the patched version of SDL. In that case
it will additionally allow the gles1 and gles2 drivers and set the
right video mode attributes to get the corresponding context.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 3726c60deab2bd94617a562abb63f735627a25e4)
The coding style has for a long time said to avoid using redundant glib
data types such as gint or gchar etc because we feel that they make the
code look unnecessarily foreign to developers coming from outside of the
Gnome developer community.
Note: When we tried to find the historical rationale for the types we
just found that they were apparently only added for consistent syntax
highlighting which didn't seem that compelling.
Up until now we have been continuing to use some of the platform
specific type such as gint{8,16,32,64} and gsize but this patch switches
us over to using the standard c99 equivalents instead so we can further
ensure that our code looks familiar to the widest range of C developers
who might potentially contribute to Cogl.
So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this
switches all Cogl code to instead use the int{8,16,32,64}_t and
uint{8,16,32,64}_t c99 types instead.
Instead of gsize we now use size_t
For now we are not going to use the c99 _Bool type and instead we have
introduced a new CoglBool type to use instead of gboolean.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
Removing CoglHandle has been an on going goal for quite a long time now
and finally this patch removes the last remaining uses of the CoglHandle
type and the cogl_handle_ apis.
Since the big remaining users of CoglHandle were the cogl_program_ and
cogl_shader_ apis which have replaced with the CoglSnippets api this
patch removes both of these apis.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0)
Since the original patch was done after removing deprecated API
this back ported patch doesn't affect deprecated API and so
actually this cherry-pick doesn't remove all remaining use of
CoglHandle as it did for the master branch of Cogl.
This re-works the SDL integration api to simplify the integration for
application developers and also allow Cogl to know when the application
is about to go idle waiting for events so it can perform idle
book-keeping work.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Instead of creating a dummy framebuffer allocation just so we can setup
crtc modes during display_setup we now wait until the first swap_buffers
request before setting up the crtc modes.
This patch also adds a cogl_kms_display_queue_modes_reset() function
that allows developers to explicitly queue a reset of the crtc modes.
The idea is that applications that handle VT switching can use this for
VT enter events to explicitly ensure their mode is restored since modes
are often not automatically restored correctly.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds support for mirroring the display output on two KMS
connectors.
This patch also checks for a number of environment variables that can
influence how KMS is configured. The following variables can be set:
COGL_KMS_MIRROR: If this is set to anything then Cogl will try and setup
two connectors with the same resolution so that onscreen frame buffers
can be mirrored.
COGL_KMS_CONNECTOR0: This can be set to an integer identifier for a
specific KMS connector id to use for the first output.
COGL_KMS_CONNECTOR0_MODE: Can be set to a mode name like "1024x768"
explicitly select what mode should be used for the first output.
If COGL_KMS_MIRROR is set then COGL_KMS_CONNECTOR1 and
COGL_KMS_CONNECTOR1_MODE can optionally be set to specify a connector id
and mode name for the second output.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
