This is intended to be used only for plane assignment, and CRTC like
changes, so that one can e.g. change a cursor plane on a pending update
that changes the primary plane, before it has been committed to KMS.
The kms-updates test overrides the get-state function MetaKmsCrtc. This
is needd to not have the update mechanism not clamp the gamma size to 0,
as vkms reports the gamma length 0. By pretending it's 3, we can test a
simple and small gamma lut is merged correctly when merging updates.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2854>
This looks like a bug: There's no reason why windows which advertise
min-size hints that are exactly the size of the workarea should not be
allowed to maximize, so change the checks here to allow for that.
The commit message of 7f64d6b9 also makes the point that this was not
intended, as it says "larger than".
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2873>
Surfaces belonging to a screen-casted window should always be considered
visible even if they are not visible on any stage view - be it because
they are on a different workspace, minimized or occluded.
Doing this in an optimal fashion is highly complex right now -
interdependent with (and somewhat similar to) ClutterClones. Thus treat
stream-casted surfaces similar to those with clones, with the small
difference that even a fully invisible surface still gets a primary view
- the fastest one. This ensures that clients never refresh too slow for a
screen-cast, at the cost of sometimes refreshing too fast.
The later only happens on certain multi-monitor setups and should thus be
acceptable.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2789>
There is an increasing number of cases where we want the frame callback
logic to run for a stage-view and the complexity needed to avoid these,
combined with the likelyhood of bugs, arguably does not justify the
benefit any more.
Thus unconditionally schedule updates for all stage-views when frame
callbacks are requested.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2789>
Screen-casted windows need to be considered visible in various situations
but existing APIs such as `clutter_actor_is_effectively_on_stage_view()`
don't do so. Add new API that allows checking if a surface belongs to a
screen-casted window for the respective cases.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2789>
The introduction of the META_GRAB_OP_WINDOW_FLAG_UNCONSTRAINED
flag threw off some checks around keyboard-driven resize. This
was partly because there were some == checks that did not account
for that flag maybe being enabled, but also the handling
of META_GRAB_OP_KEYBOARD_RESIZING_UNKNOWN into a definite
resize direction was maybe unsetting that flag. Fix both things
at the same time.
Fixes: 2d8fa26c8e ("core: Pass "frame action" grab operations as an "unconstrained" grab op")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2629
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2871>
From the scale factors available to it, Mutter will now try to select
the scale factor that makes the UI's size as close as possible to the
size it would be, w/o scaling, on a display at 135 PPI (for mobile
displays) or at 110 PPI (for stationary displays)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2653>
After !2489, the active workspace's MRU list is now used to pick
the next focus window instead of the stack order.
This list is currently only updated on focus, which can lead to
surprising behavior when closing a window after activating its
ShellApp in the shell.
That is because raising a window (as part of shell_app_activate())
will only change the stacking order, so when closing the active
app window, the focus will switch to whatever had focus before the
app was activated, not the app's next window.
In order to allow gnome-shell to address this, add a new
raise_and_make_recent() method that also adjust the MRU order.
https://gitlab.gnome.org/GNOME/mutter/-/issues/2540
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2866>
The pointer to the manager, the peer name and the ID are things that are
always metadata related to a session, so make them properties on the
interface instead of duplicating them. The implementations still need to
keep track of them, but their existance is shared.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2713>
This class is intended to be used as a base class for D-bus interface
implementations that deal with "session" objects, i.e. a D-Bus object
representing a certain session of some kind, e.g. a screen cast session.
It handles things such as hooking up to the D-Bus client watcher,
generates IDs, handles shutdown procedures.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2713>
It's currently not set by anything, and will only be used by
non-abstract implementations of a future D-Bus interface session
manager. When interface implementations gets ported to this new type,
their MetaDbusSession implementations will set this vfunc.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2713>
This means the MetaDbusSession interface takes a more active role
instead of being something that more or less sends signals to the
interface implementor. This will allow better control when using
MetaDbusSession to manage these sessions, instead of their non-abstract
variants.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2713>
Allows for creating LUTs at some fixed size which maintains enough
precision for concatenating or otherwise manipulating the LUT without
having to care about the precision of the hardware.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2861>
If the device supports the atomic API the property based API is used to
write gamma updates and the legacy API is used in the non-atomic case.
The current state is read from the legacy API always though which can be
different from the property API. This commit always uses the correct API
to update the state.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2861>
This API will be used by GNOME Shell to handle X11 events
in the relevant places, as a substitute to gdk_window_add_filter().
It is ATM still a bit ironic, since the Mutter X11 event handler
is itself a GdkFilterFunc, but it may move away from that eventually.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2779>
With detach meaning having the onscreen stop listening on configuration
changes on the corresponding backing mode setting objects. We need to do
this as there is a time between rebuilding the views, and that the new
mode sets are called, where the old onscreen is kept alive, but the
stage view is gone. At this point in time, if privacy screen or gamma
configuration changes, e.g. by the night light temperature changing, the
onscreen would attempt to schedule an update on the now gone stage view.
This commit also renames the "keep onscreen alive" to "detached
onscreens" to more clearly communicate that it's detached onscreens from
their corresponding mode setting objects.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2621
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2863>
For the coordinates of pointers or stylii, we translate the ones we store
using the viewport matrix already. For touch events otoh, we store coords
untranslated and translate them later only for event emission.
Let's be consistent here and store the coordinates of touch events
translated, just like we do for pointer events.
This fixes touch window dragging on rotated monitors. MetaWindowDrag calls
clutter_seat_query_state(), which uses those stored coordinates. So in case
of a touch sequence the coords returned by query_state() would be
untranslated.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2859>
In the case where we early-out from meta_window_drag_begin(), the
effective_drag_window might not be set yet. In this case, we might finalize
the object before effective_drag_window is set, leading to a NULL pointer
when accessing window->display in hide_tile_preview().
To avoid that crash, add a check whether the window is set already. If no
window is set, we can just skip hiding the preview anyway.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2858>
This fixes an issue when GLFW tries to change the display resolution
while fullscreen where the application window size doesn't get updated
according to the emulated resolution.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2725>
Streams are generally recoverable by the client and errors may happen
e.g. on negotiation failures. Right now we close the stream and
corresponding session, which is neither necessary nor expected by
clients.
Just disable the stream instead and let clients handle things as they
seem fit. This allows clients to e.g. try several Gstreamer pipelines
with limited caps on a single stream.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2850>
Doing it in dispose means the backend is actively tearing down itself,
meaning various components might or might not be there, depending on how
the tearing down is implemented. Make things a bit more robust by doing
any work that might rely on the backend being there before shutdown is
done in response to the 'prepare-shutdown' signal being emitted by the
backend.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2853>
Reading upon the history of this code branch (commits 6891ce95dc
and 7a4c808e43 are most relevant), it seems this code is meant to
synchronize Mutter focus state taking the Xserver state as true.
That is, if Mutter tried to change the focus but something truncated
that action, Mutter focus will be changed to be in sync with the
Xserver again.
This sounds backwards in a Wayland session. Mutter focus should be
the canonical source, and not second-guessed from the current Xserver
focus window. These race conditions might still apply between X11
clients, so make these paths only apply in that case.
An example of this breaking can be reproduced with a Spotify and
Firefox window, moving the focus from the first to the second by
going to the GNOME Shell overview in between, and clicking the
Firefox window from there. The Firefox window will be raised, but
refuse to take focus.
It's unclear what made this an issue recently, perhaps commit
0e6395d932 since the now possibly ignored XI_FocusIn/Out events
affect this accounting of the Xserver focused window. Anyhow it
sounds better to ignore these paths for Wayland/native altogether.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2841>
The intention when the offset request was added to protocol was
that the attach request in a new enough protocol version should
require dx/dy to be zero, but ignore them otherwise.
The current code checks for 0, but then overwrites the existing
dx/dy with it, which renders an earlier wl_surface_offset() call
ineffective.
Fixes: #2622
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2843>
This protocol is intended to let special clients create transient-for
relationships between X11 and Wayland windows. The client that needs
this is xdg-desktop-portal-gnome, which will create e.g. file chooser
Wayland dialogs that should be mapped on top of X11 windows.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
When modal dialogs are attached, and we set the parent/transient-for
after setting the modal type, the attachedness isn't updated. This is
(apparently) not the case for X11 windows, as they go through a
unmanage/manage dance avoiding the issue.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
The script is a list of newline separated command lines that are sent to
the client one by one as if one would have used e.g.
meta_test_client_do().
It doesn't have error handling as it's expected to be used from tests,
and handling errors in tests that never expects to handle errors is
cumbersome.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
The service channel D-Bus interface aims to be a "back door" for
services that needs special casing in Mutter, e.g. have custom private
protocols only meant to be used by that particular service.
There are currently no special casing implemented; only the basic
service channel infrastructure is added. There is a single method on the
interface, that is meant to eventually be used by
xdg-desktop-portal-gnome to open a Wayland connection with a private
protocol needed for the portal backend's rather special window
management needs.
The service channel Wayland client works by allowing one instance of
each "type", where each time needs to be defined to work in parallel. If
a new service client connects, the old one will be disconnected.
MetaWaylandClient's are used to manage the service clients, and are
assigned the service client type.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
One can add a wl_global filter to a wl_display instance, which can be
used to decide what clients should see what globals. This has so far
been used to limit a Xwayland specific protocol extension to only
Xwayland. In order to expand the logic about what globals are filtered
to what clients, introduce a filter manager and port the Xwayland
specific protocol filter to this new manager.
Tests are added, using a new dummy protocol, to ensure that filtering is
working as expected.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
It only tests indirect clients, i.e. not the subprocess part, so far,
but tests explicitly terminating by destroying the MetaWaylandClient
object, as well as the client self terminating and the signal being
emitted.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
This API creates a "client" then later sets up a wl_client and returns a
file descriptor some Wayland client can connect to. It's meant to be
used as a method other than WAYLAND_SOCKET and process launching, e.g.
passing a file descriptor via a D-Bus API.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
There will be two kind of client instances, lets move fields that are
only relevant to the current way of operation in an anonymous struct to
keep things a bit separate.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
On X11, the stage itself is backed by an XWindow, and moving the
input focus elsewhere will bypass any Clutter-level grabs.
This effectively allows newly opened windows to steal the focus
from gnome-shell itself, which is clearly undesirable. To prevent
that, only allow moving the X11 focus to a Window when no grab is
in place, just like commit 50e89e376 did for the stage focus.
But particularly the updating of x11_display->focus_xwindow is not
prevented. Since it's more consistent to the MetaDisplay/MetaX11Display
dual focus tracking and across Wayland/X11 backends, ensure the X11
input focus is actually set on the last focus Window after the
grabs are gone and windows became interactable again.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2832>
This patch unfortunately results in situations where it is intended
that the focus change happens while a grab is present (e.g. Alt+tab
popup), resulting in confused focus state.
This commit is reverted in order to try a similar approach at a
different level.
This reverts commit 7531669b4f.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2832>
We used it to retrieve a Display, and convert between Atoms and
strings. We can just use the MetaX11Display's Display (It's the
same than GDK's anyways) and use XInternAtom/XGetAtomName for
these conversions.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2836>
We didn't always set an implementation, when the foreign toplevel wasn't
found, and when the importer tried to set the parent-child relationship,
the implementation was missing and we'd crash in wl_closure_invoke() in
libwayland-server.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2834>
Windows that are decorated may get configure requests before
the frames client created a corresponding frame window and Mutter
reparented the window.
Since the configure request results in the buffer size being
used to update the window size and the window does not have a
buffer yet, these requests could mistakenly result in the client
window being given a minimal size.
In these situations, do not use the buffer size but the given
size. The window still has to undergo frame creation and
reparenting before being shown for the first time.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2588
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2605
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2808>
This used to be implicitly done by popups using a META_GRAB_OP_WAYLAND_POPUP
MetaDisplay grab. Since commit a8cd488c6f Wayland popups no longer do that,
so the keyboard focus was simply unset if a popup was destroyed while having
the keyboard focus.
Trigger a full input focus sync, so the correct MetaWaylandKeyboard focus
surface is looked up from the focused MetaWindow.
Fixes: a8cd488c6f - wayland: Drop redundant MetaDisplay grab op
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2833>
On one hand, this used to be handled generically in all the paths that
changed the MetaWaylandPointer focus surface, induced by user interaction
or not.
On the other hand, just listening for crossing events is not sufficient
since those also do happen programmatically. We must only listen to
crossing events that have a physical source device, meaning this was
created through user interaction.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/888
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2828>
On Wayland sessions, this handling is unnecessary and even prone
to confusion (e.g. crossing serials are only ignored in X11-exclusive
paths, so this handling competes directly with that in MetaWaylandPointer).
Avoid it entirely there, so MetaWaylandPointer can figure out
sloppy/mouse mode focus for all Wayland/Xwayland surfaces.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2828>
