Since using addresses that might change is something that finally
the FSF acknowledge as a plausible scenario (after changing address
twice), the license blurb in the source files should use the URI
for getting the license in case the library did not come with it.
Not that URIs cannot possibly change, but at least it's easier to
set up a redirection at the same place.
As a side note: this commit closes the oldes bug in Clutter's bug
report tool.
http://bugzilla.openedhand.com/show_bug.cgi?id=521
The current Alpha value is an unsigned integer that can be used
implicitly as a fixed point value. This makes writing an alpha
function overshooting below and above the current range basically
impossible without complicating an already complex code, and
creating weird corner cases.
For this reason, the Alpha value should be defined as a floating
point normalized value, spanning a range between 0.0 and 1.0; in
order to allow overshooting, the valid range is extended one unit
below and one unit above, thus making it -1.0 .. 2.0.
This commit updates the various users of the ClutterAlpha API
and the tests cases.
This commit also removes all the current alpha functions exposed
in the public API.
* clutter.symbols: Add ClutterBehaviourOpacity accessors.
* clutter/clutter-behaviour-opacity.h:
* clutter/clutter-behaviour-opacity.c:
(clutter_behaviour_opacity_set_bounds),
(clutter_behaviour_opacity_get_bounds): Add accessors for the
opacity-start and opacity-end properties.
* clutter/clutter-behaviour-scale.h: Fix the argument name to
avoid complaints by gtk-doc.
* clutter/clutter-actor.c::
* clutter/clutter-behaviour-opacity.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-effect.c:
* clutter/clutter-label.c: Remove the usage of G_PARAM_CONSTRUCT
without an override for the ::construct virtual function; using
G_PARAM_CONSTRUCT to set the default value of a property is not
the recommended approach; default values are set inside the
instance init function.
When computing the increasing smoothstep alpha value use the right type
for the results, to avoid overflowing the [0, 0xffff] range of the alpha
value.
Also use the right format when printing out the opacity and alpha values
in the opacity behaviour.
Always make sure that the opacity is a positive integer, even if the
start and end opacities are inverted.
Also, use the correct integer-to-pointer casts, as the opacity is an
unsigned integer.
* clutter/clutter-actor.c: (clutter_actor_allocate_coords):
Fix an amazingly not noticed until now typo.
Minor doc tweaks.
* clutter/clutter-behaviour-opacity.c:
(clutter_behaviour_alpha_notify):
Take into account initial opacity value when calculating from alpha.
* clutter/clutter-group.c:
Add new get_nth_child() and get_n_children() api calls.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
Add new set_width/height API calls.
Tweak scaling by reseting matrix.
Make set_opactiy() take parent opacity into account.
Fix clipping.
* clutter/clutter-alpha.c:
Add more sine functionality.
* clutter/clutter-behaviour-opacity.c:
Dont make a copy of all applied actors but use a foreach()
* clutter/clutter-behaviour-scale.c:
Give correct limits to propertys.
Tweak gravity a little more.
Update docs.
:
* clutter/clutter-behaviour.c: (clutter_behaviour_remove):
Minor warning text change.
* clutter/clutter-feature.c: (clutter_feature_wait_for_vblank):
Minor dri ioctl tweak.
* clutter/clutter-label.c:
* clutter/clutter-label.h:
Add new label_full api call.
* clutter/clutter-behaviour.h: Add a function prototype
for the foreach function: we need something more specific
than GFunc; add clutter_behaviour_get_actors(), used to
get a list of the actors.
* clutter/clutter-behaviour.c: Add debugging notes; add
a warning for behaviour implementations missing the
alpha_notify vfunc; add api documentation
* clutter/clutter-behaviour-opacity.c:
* clutter/clutter-behaviour-path.c:
* clutter/clutter-behaviour-scale.c: Reimplement the
alpha_notify functions using the new foreach function
and, where possible, by directly iterating on the
actors: this shaves off the number of recalculations
of the property/alpha values, and the number of
functions.
* clutter/clutter-private.h: Add our own READABLE,
WRITABLE and READWRITE paramspec flags, declaring the
string components of the properties GParamSpec as static;
this should shave off some bytes in the memory footprint
and avoid relocations.
* clutter/clutter-actor.c:
* clutter/clutter-behaviour.c:
* clutter/clutter-behaviour-opacity.c:
* clutter/clutter-behaviour-path.c:
* clutter/clutter-behavuour-scale.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-label.c:
* clutter/clutter-rectangle.c:
* clutter/clutter-stage.c:
* clutter/clutter-texture.c:
* clutter/clutter-timeline.c: Use the CLUTTER_PARAM_*
macros we just added.
* clutter/clutter-behaviour-scale.c: Add properties for
the scale begin, scale end and gravity parameters.
* clutter/clutter-behaviour-path.h: Mark the ClutterKnot
memory management functions as public (for the bindings),
since we use the slice allocator for copying knots around;
add a clutter_knot_equal() function.
* clutter/clutter-behaviour-path.c:
(node_distance): Use clutter_knot_equal() as a fast path
to avoid the sqrt() in case the nodes we are using are
at the same position.
(path_total_length): Additional check on the existence
of the next node.
* examples/behave.c: Do not leak the ClutterBehaviour
objects around.
* clutter/clutter-actor.c:
* clutter/clutter-alpha.c:
* clutter/clutter-behaviour-opacity.c:
* clutter/clutter-behaviour-scale.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-feature.c:
* clutter/clutter-label.c:
* clutter/clutter-main.c:
* clutter/clutter-stage.c:
* clutter/clutter-texture.c
* clutter/clutter-timeline.c:
* clutter/clutter-debug.h:
Make CLUTTER_NOTE() just take a string rather than a func.
Add more default context to output.
* configure.ac:
Fix flag and add more help docs for --ebable-debug option.
* configure.ac: Enable debug messages also when
--enable-debug is set to "minimum".
* clutter/Makefile.am:
* clutter/clutter-debug.h: Move all debugging macros inside
this private header; make all debug macros depend on the
CLUTTER_ENABLE_DEBUG compile time define, controlled by
the --enable-debug configure switch; add G_LOG_DOMAIN define.
* clutter/clutter-main.c: Clean up the debug stuff; add
command line argument parsing using GOption; the debug
messages now are triggered like this:
CLUTTER_DEBUG=section:section:... clutter-app
or like this:
clutter-app --clutter-debug=section:section:...
where "section" is one of the sections listed in clutter-main.c,
or "all", for all sections; each section is bound to a flag,
which can be used to define a domain when adding a debug note
using the CLUTTER_NOTE() macro; the old CLUTTER_DBG() macro is
just a wrapper around that, under the CLUTTER_DEBUG_MISC domain;
CLUTTER_NOTE() is used like this:
CLUTTER_NOTE (DOMAIN, log-function);
where log function is g_printerr(), g_message(), g_warning(),
g_critical() or directly g_log() - for instance:
CLUTTER_NOTE (PANGO, g_warning ("Cache miss: %d", glyph));
will print the warning only if the "pango" flag has been
set to the CLUTTER_DEBUG envvar or passed to the --clutter-debug
command line argument.
similar to CLUTTER_SHOW_FPS, there's also the --clutter-show-fps
command line switch; also, the --display and --screen command
line switches have been added: the first overrides the DISPLAY
envvar and the second controls the X screen used by Clutter to
get the root window on the display.
* clutter/clutter-main.h:
* clutter/clutter-main.c: Add extended support for GOption
in Clutter; use clutter_init_with_args() to let Clutter
parse your own command line arguments; use instead
clutter_get_option_group() to get the GOptionGroup used by
Clutter if you want to do the parsing yourself with
g_option_context_parse(). The init sequence has been verified,
updated and moved into common functions where possible.
* clutter/pango/pangoclutter-render.c:
* clutter/*.c: Include "clutter-debug.h" where needed; use
CLUTTER_NOTE() instead of CLUTTER_DBG().
* examples/super-oh.c: Use the new clutter_init_with_args()
function, and add a --num-hands command line switch to
the SuperOH example code controlling the number of hands at
runtime.
* clutter/clutter-behaviour-path.h:
* clutter/clutter-behaviour-path.c: Add "since" strings; add
a "knot" property which can be used to append a knot to the path;
fix apidoc.
* clutter/clutter-alpha.c: Add "since" strings.
* clutter/clutter-feature.c: Add apidoc.
* clutter/clutter-behaviour-opacity.c: Add the "opacity-start"
and "opacity-end" properties; rewrite constructor to use them.
* clutter/clutter-behaviour-path.h:
* clutter/clutter-behaviour-path.c: Add a "knot-reached" signal,
which is emitted when the path reaches a node in the nodes list;
flesh out the documentation a bit; sync the parameters names
so that gtk-doc doesn't complain about missing stuff.
* clutter/clutter-behaviour.h:
* clutter/clutter-behaviour.c: Add the alpha value to the
ClutterBehaviour::alpha_notify vfunc, so you don't have to
get the value from the alpha inside the behaviour implementations;
add more documentation.
* clutter/clutter-alpha.c: Flesh out the description.
* clutter/clutter-actor.h: Update the header.
* clutter/clutter-behaviour-opacity.c:
* clutter/clutter-behaviour-scale.c: Update docs.
* clutter/clutter-alpha.h:
* clutter/clutter-alpha.c: Add a data parameter to
the ClutterAlphaFunc; add a data+destroy parameter
to clutter_alpha_set_func() and to clutter_alpha_new(),
and turned the latter into clutter_alpha_new_full();
add a simple, empty constructor clutter_alpha_new().
These changes makes writing bindings a tad more easy,
as bindings require passing their own functions in
order to call the real alpha function.
* clutter/clutter-behaviour.h: Clean up the header.
* clutter/clutter-behaviours.[ch]:
* clutter/clutter-behaviour-opacity.[ch]:
* clutter/clutter-behaviour-path.[ch]:
* clutter/clutter-behaviour-scale.[ch]: Split the
ClutterBehaviourPath, ClutterBehaviourOpacity and
ClutterBehaviourScale into their own files as they
have been growing a bit. Fix ClutterBehaviourPath
API.
* clutter/clutter-media.h: Remove the commented
"metadata_available" signal: gtk-doc chokes up on that.
* clutter/clutter-timeline.h:
* clutter/clutter-timeline.c: Remove the useless
ClutterTimelineAlphaFunc signature; add missing accessor
methods for the properties; clean up a bit.
* clutter/clutter-util.h:
* clutter/clutter-util.c: Remove unneeded function
clutter_util_can_create_texture().
* clutter/clutter-feature.h: Sync the name of
clutter_feature_get_all() with the name declared
in clutter-feature.h.
* clutter/Makefile.am:
* clutter/clutter.h: Update.
* examples/behave.c: Update to the new ClutterAlpha
constructor.
* examples/super-oh.c: Use the right pointer and avoid
the compiler making a fuss about it.
