mutter/tests/conform/test-backface-culling.c

277 lines
7.5 KiB
C
Raw Normal View History

#include <clutter/clutter.h>
#include <cogl/cogl.h>
#include <string.h>
#include "test-conform-common.h"
static const ClutterColor stage_color = { 0x0, 0x0, 0x0, 0xff };
#ifdef CLUTTER_COGL_HAS_GL
/* Size the texture so that it is just off a power of two to enourage
it so use software tiling when NPOTs aren't available */
[cogl] Remove max_waste argument from Texture ctors The CoglTexture constructors expose the "max-waste" argument for controlling the maximum amount of wasted areas for slicing or, if set to -1, disables slicing. Slicing is really relevant only for large images that are never repeated, so it's a useful feature only in controlled use cases. Specifying the amount of wasted area is, on the other hand, just a way to mess up this feature; 99% the times, you either pull this number out of thin air, hoping it's right, or you try to do the right thing and you choose the wrong number anyway. Instead, we can use the CoglTextureFlags to control whether the texture should not be sliced (useful for Clutter-GST and for the texture-from-pixmap actors) and provide a reasonable value for enabling the slicing ourself. At some point, we might even provide a way to change the default at compile time or at run time, for particular platforms. Since max_waste is gone, the :tile-waste property of ClutterTexture becomes read-only, and it proxies the cogl_texture_get_max_waste() function. Inside Clutter, the only cases where the max_waste argument was not set to -1 are in the Pango glyph cache (which is a POT texture anyway) and inside the test cases where we want to force slicing; for the latter we can create larger textures that will be bigger than the threshold we set. Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Robert Bragg <robert@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2009-05-23 14:18:18 -04:00
#define TEXTURE_SIZE 257
#else /* CLUTTER_COGL_HAS_GL */
/* We can't use the funny-sized texture on GL ES because it will break
cogl_texture_polygon. However there is only one code path for
rendering quads so there is no need */
[cogl] Remove max_waste argument from Texture ctors The CoglTexture constructors expose the "max-waste" argument for controlling the maximum amount of wasted areas for slicing or, if set to -1, disables slicing. Slicing is really relevant only for large images that are never repeated, so it's a useful feature only in controlled use cases. Specifying the amount of wasted area is, on the other hand, just a way to mess up this feature; 99% the times, you either pull this number out of thin air, hoping it's right, or you try to do the right thing and you choose the wrong number anyway. Instead, we can use the CoglTextureFlags to control whether the texture should not be sliced (useful for Clutter-GST and for the texture-from-pixmap actors) and provide a reasonable value for enabling the slicing ourself. At some point, we might even provide a way to change the default at compile time or at run time, for particular platforms. Since max_waste is gone, the :tile-waste property of ClutterTexture becomes read-only, and it proxies the cogl_texture_get_max_waste() function. Inside Clutter, the only cases where the max_waste argument was not set to -1 are in the Pango glyph cache (which is a POT texture anyway) and inside the test cases where we want to force slicing; for the latter we can create larger textures that will be bigger than the threshold we set. Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Robert Bragg <robert@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2009-05-23 14:18:18 -04:00
#define TEXTURE_SIZE 32
#endif /* CLUTTER_COGL_HAS_GL */
/* Amount of pixels to skip off the top, bottom, left and right of the
texture when reading back the stage */
[cogl] Remove max_waste argument from Texture ctors The CoglTexture constructors expose the "max-waste" argument for controlling the maximum amount of wasted areas for slicing or, if set to -1, disables slicing. Slicing is really relevant only for large images that are never repeated, so it's a useful feature only in controlled use cases. Specifying the amount of wasted area is, on the other hand, just a way to mess up this feature; 99% the times, you either pull this number out of thin air, hoping it's right, or you try to do the right thing and you choose the wrong number anyway. Instead, we can use the CoglTextureFlags to control whether the texture should not be sliced (useful for Clutter-GST and for the texture-from-pixmap actors) and provide a reasonable value for enabling the slicing ourself. At some point, we might even provide a way to change the default at compile time or at run time, for particular platforms. Since max_waste is gone, the :tile-waste property of ClutterTexture becomes read-only, and it proxies the cogl_texture_get_max_waste() function. Inside Clutter, the only cases where the max_waste argument was not set to -1 are in the Pango glyph cache (which is a POT texture anyway) and inside the test cases where we want to force slicing; for the latter we can create larger textures that will be bigger than the threshold we set. Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Robert Bragg <robert@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2009-05-23 14:18:18 -04:00
#define TEST_INSET 4
/* Size to actually render the texture at */
#define TEXTURE_RENDER_SIZE 32
typedef struct _TestState
{
guint frame;
CoglHandle texture;
} TestState;
static gboolean
validate_part (int xnum, int ynum, gboolean shown)
{
guchar *pixels, *p;
ClutterActor *stage = clutter_stage_get_default ();
gboolean ret = TRUE;
/* Read the appropriate part but skip out a few pixels around the
edges */
pixels = clutter_stage_read_pixels (CLUTTER_STAGE (stage),
[cogl] Remove max_waste argument from Texture ctors The CoglTexture constructors expose the "max-waste" argument for controlling the maximum amount of wasted areas for slicing or, if set to -1, disables slicing. Slicing is really relevant only for large images that are never repeated, so it's a useful feature only in controlled use cases. Specifying the amount of wasted area is, on the other hand, just a way to mess up this feature; 99% the times, you either pull this number out of thin air, hoping it's right, or you try to do the right thing and you choose the wrong number anyway. Instead, we can use the CoglTextureFlags to control whether the texture should not be sliced (useful for Clutter-GST and for the texture-from-pixmap actors) and provide a reasonable value for enabling the slicing ourself. At some point, we might even provide a way to change the default at compile time or at run time, for particular platforms. Since max_waste is gone, the :tile-waste property of ClutterTexture becomes read-only, and it proxies the cogl_texture_get_max_waste() function. Inside Clutter, the only cases where the max_waste argument was not set to -1 are in the Pango glyph cache (which is a POT texture anyway) and inside the test cases where we want to force slicing; for the latter we can create larger textures that will be bigger than the threshold we set. Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Robert Bragg <robert@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2009-05-23 14:18:18 -04:00
xnum * TEXTURE_RENDER_SIZE + TEST_INSET,
ynum * TEXTURE_RENDER_SIZE + TEST_INSET,
TEXTURE_RENDER_SIZE - TEST_INSET * 2,
TEXTURE_RENDER_SIZE - TEST_INSET * 2);
/* Make sure every pixels is the appropriate color */
for (p = pixels;
[cogl] Remove max_waste argument from Texture ctors The CoglTexture constructors expose the "max-waste" argument for controlling the maximum amount of wasted areas for slicing or, if set to -1, disables slicing. Slicing is really relevant only for large images that are never repeated, so it's a useful feature only in controlled use cases. Specifying the amount of wasted area is, on the other hand, just a way to mess up this feature; 99% the times, you either pull this number out of thin air, hoping it's right, or you try to do the right thing and you choose the wrong number anyway. Instead, we can use the CoglTextureFlags to control whether the texture should not be sliced (useful for Clutter-GST and for the texture-from-pixmap actors) and provide a reasonable value for enabling the slicing ourself. At some point, we might even provide a way to change the default at compile time or at run time, for particular platforms. Since max_waste is gone, the :tile-waste property of ClutterTexture becomes read-only, and it proxies the cogl_texture_get_max_waste() function. Inside Clutter, the only cases where the max_waste argument was not set to -1 are in the Pango glyph cache (which is a POT texture anyway) and inside the test cases where we want to force slicing; for the latter we can create larger textures that will be bigger than the threshold we set. Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Robert Bragg <robert@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2009-05-23 14:18:18 -04:00
p < pixels + ((TEXTURE_RENDER_SIZE - TEST_INSET * 2)
* (TEXTURE_RENDER_SIZE - TEST_INSET * 2));
p += 4)
{
if (p[0] != (shown ? 255 : 0))
ret = FALSE;
if (p[1] != 0)
ret = FALSE;
if (p[2] != 0)
ret = FALSE;
}
g_free (pixels);
return ret;
}
static void
validate_result (TestState *state)
{
/* Front-facing texture */
g_assert (validate_part (0, 0, TRUE));
/* Back-facing texture */
g_assert (validate_part (1, 0, FALSE));
/* Front-facing texture polygon */
g_assert (validate_part (2, 0, TRUE));
/* Back-facing texture polygon */
g_assert (validate_part (3, 0, FALSE));
/* Regular rectangle */
g_assert (validate_part (4, 0, TRUE));
/* Backface culling disabled - everything should be shown */
/* Front-facing texture */
g_assert (validate_part (0, 1, TRUE));
/* Back-facing texture */
g_assert (validate_part (1, 1, TRUE));
/* Front-facing texture polygon */
g_assert (validate_part (2, 1, TRUE));
/* Back-facing texture polygon */
g_assert (validate_part (3, 1, TRUE));
/* Regular rectangle */
g_assert (validate_part (4, 1, TRUE));
/* Comment this out if you want visual feedback of what this test
* paints.
*/
clutter_main_quit ();
}
static void
on_paint (ClutterActor *actor, TestState *state)
{
int i;
int frame_num;
cogl_set_backface_culling_enabled (TRUE);
cogl_push_matrix ();
/* Render the scene twice - once with backface culling enabled and
once without. The second time is translated so that it is below
the first */
for (i = 0; i < 2; i++)
{
[cogl] Remove max_waste argument from Texture ctors The CoglTexture constructors expose the "max-waste" argument for controlling the maximum amount of wasted areas for slicing or, if set to -1, disables slicing. Slicing is really relevant only for large images that are never repeated, so it's a useful feature only in controlled use cases. Specifying the amount of wasted area is, on the other hand, just a way to mess up this feature; 99% the times, you either pull this number out of thin air, hoping it's right, or you try to do the right thing and you choose the wrong number anyway. Instead, we can use the CoglTextureFlags to control whether the texture should not be sliced (useful for Clutter-GST and for the texture-from-pixmap actors) and provide a reasonable value for enabling the slicing ourself. At some point, we might even provide a way to change the default at compile time or at run time, for particular platforms. Since max_waste is gone, the :tile-waste property of ClutterTexture becomes read-only, and it proxies the cogl_texture_get_max_waste() function. Inside Clutter, the only cases where the max_waste argument was not set to -1 are in the Pango glyph cache (which is a POT texture anyway) and inside the test cases where we want to force slicing; for the latter we can create larger textures that will be bigger than the threshold we set. Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Robert Bragg <robert@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2009-05-23 14:18:18 -04:00
float x1 = 0, x2, y1 = 0, y2 = (float)(TEXTURE_RENDER_SIZE);
CoglTextureVertex verts[4];
memset (verts, 0, sizeof (verts));
/* Set the color to white so that all the textures will be drawn
at their own color */
cogl_set_source_color4f (1.0, 1.0,
1.0, 1.0);
[cogl] Remove max_waste argument from Texture ctors The CoglTexture constructors expose the "max-waste" argument for controlling the maximum amount of wasted areas for slicing or, if set to -1, disables slicing. Slicing is really relevant only for large images that are never repeated, so it's a useful feature only in controlled use cases. Specifying the amount of wasted area is, on the other hand, just a way to mess up this feature; 99% the times, you either pull this number out of thin air, hoping it's right, or you try to do the right thing and you choose the wrong number anyway. Instead, we can use the CoglTextureFlags to control whether the texture should not be sliced (useful for Clutter-GST and for the texture-from-pixmap actors) and provide a reasonable value for enabling the slicing ourself. At some point, we might even provide a way to change the default at compile time or at run time, for particular platforms. Since max_waste is gone, the :tile-waste property of ClutterTexture becomes read-only, and it proxies the cogl_texture_get_max_waste() function. Inside Clutter, the only cases where the max_waste argument was not set to -1 are in the Pango glyph cache (which is a POT texture anyway) and inside the test cases where we want to force slicing; for the latter we can create larger textures that will be bigger than the threshold we set. Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Robert Bragg <robert@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2009-05-23 14:18:18 -04:00
x2 = x1 + (float)(TEXTURE_RENDER_SIZE);
/* Draw a front-facing texture */
Fully integrates CoglMaterial throughout the rest of Cogl This glues CoglMaterial in as the fundamental way that Cogl describes how to fill in geometry. It adds cogl_set_source (), which is used to set the material which will be used by all subsequent drawing functions It adds cogl_set_source_texture as a convenience for setting up a default material with a single texture layer, and cogl_set_source_color is now also a convenience for setting up a material with a solid fill. "drawing functions" include, cogl_rectangle, cogl_texture_rectangle, cogl_texture_multiple_rectangles, cogl_texture_polygon (though the cogl_texture_* funcs have been renamed; see below for details), cogl_path_fill/stroke and cogl_vertex_buffer_draw*. cogl_texture_rectangle, cogl_texture_multiple_rectangles and cogl_texture_polygon no longer take a texture handle; instead the current source material is referenced. The functions have also been renamed to: cogl_rectangle_with_texture_coords, cogl_rectangles_with_texture_coords and cogl_polygon respectivly. Most code that previously did: cogl_texture_rectangle (tex_handle, x, y,...); needs to be changed to now do: cogl_set_source_texture (tex_handle); cogl_rectangle_with_texture_coords (x, y,....); In the less likely case where you were blending your source texture with a color like: cogl_set_source_color4ub (r,g,b,a); /* where r,g,b,a isn't just white */ cogl_texture_rectangle (tex_handle, x, y,...); you will need your own material to do that: mat = cogl_material_new (); cogl_material_set_color4ub (r,g,b,a); cogl_material_set_layer (mat, 0, tex_handle)); cogl_set_source_material (mat); Code that uses the texture coordinates, 0, 0, 1, 1 don't need to use cog_rectangle_with_texure_coords since these are the coordinates that cogl_rectangle will use. For cogl_texture_polygon; as well as dropping the texture handle, the n_vertices and vertices arguments were transposed for consistency. So code previously written as: cogl_texture_polygon (tex_handle, 3, verts, TRUE); need to be written as: cogl_set_source_texture (tex_handle); cogl_polygon (verts, 3, TRUE); All of the unit tests have been updated to now use the material API and test-cogl-material has been renamed to test-cogl-multitexture since any textured quad is now technically a test of CoglMaterial but this test specifically creates a material with multiple texture layers. Note: The GLES backend has not been updated yet; that will be done in a following commit.
2009-01-23 11:15:40 -05:00
cogl_set_source_texture (state->texture);
cogl_rectangle (x1, y1, x2, y2);
x1 = x2;
[cogl] Remove max_waste argument from Texture ctors The CoglTexture constructors expose the "max-waste" argument for controlling the maximum amount of wasted areas for slicing or, if set to -1, disables slicing. Slicing is really relevant only for large images that are never repeated, so it's a useful feature only in controlled use cases. Specifying the amount of wasted area is, on the other hand, just a way to mess up this feature; 99% the times, you either pull this number out of thin air, hoping it's right, or you try to do the right thing and you choose the wrong number anyway. Instead, we can use the CoglTextureFlags to control whether the texture should not be sliced (useful for Clutter-GST and for the texture-from-pixmap actors) and provide a reasonable value for enabling the slicing ourself. At some point, we might even provide a way to change the default at compile time or at run time, for particular platforms. Since max_waste is gone, the :tile-waste property of ClutterTexture becomes read-only, and it proxies the cogl_texture_get_max_waste() function. Inside Clutter, the only cases where the max_waste argument was not set to -1 are in the Pango glyph cache (which is a POT texture anyway) and inside the test cases where we want to force slicing; for the latter we can create larger textures that will be bigger than the threshold we set. Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Robert Bragg <robert@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2009-05-23 14:18:18 -04:00
x2 = x1 + (float)(TEXTURE_RENDER_SIZE);
/* Draw a back-facing texture */
Fully integrates CoglMaterial throughout the rest of Cogl This glues CoglMaterial in as the fundamental way that Cogl describes how to fill in geometry. It adds cogl_set_source (), which is used to set the material which will be used by all subsequent drawing functions It adds cogl_set_source_texture as a convenience for setting up a default material with a single texture layer, and cogl_set_source_color is now also a convenience for setting up a material with a solid fill. "drawing functions" include, cogl_rectangle, cogl_texture_rectangle, cogl_texture_multiple_rectangles, cogl_texture_polygon (though the cogl_texture_* funcs have been renamed; see below for details), cogl_path_fill/stroke and cogl_vertex_buffer_draw*. cogl_texture_rectangle, cogl_texture_multiple_rectangles and cogl_texture_polygon no longer take a texture handle; instead the current source material is referenced. The functions have also been renamed to: cogl_rectangle_with_texture_coords, cogl_rectangles_with_texture_coords and cogl_polygon respectivly. Most code that previously did: cogl_texture_rectangle (tex_handle, x, y,...); needs to be changed to now do: cogl_set_source_texture (tex_handle); cogl_rectangle_with_texture_coords (x, y,....); In the less likely case where you were blending your source texture with a color like: cogl_set_source_color4ub (r,g,b,a); /* where r,g,b,a isn't just white */ cogl_texture_rectangle (tex_handle, x, y,...); you will need your own material to do that: mat = cogl_material_new (); cogl_material_set_color4ub (r,g,b,a); cogl_material_set_layer (mat, 0, tex_handle)); cogl_set_source_material (mat); Code that uses the texture coordinates, 0, 0, 1, 1 don't need to use cog_rectangle_with_texure_coords since these are the coordinates that cogl_rectangle will use. For cogl_texture_polygon; as well as dropping the texture handle, the n_vertices and vertices arguments were transposed for consistency. So code previously written as: cogl_texture_polygon (tex_handle, 3, verts, TRUE); need to be written as: cogl_set_source_texture (tex_handle); cogl_polygon (verts, 3, TRUE); All of the unit tests have been updated to now use the material API and test-cogl-material has been renamed to test-cogl-multitexture since any textured quad is now technically a test of CoglMaterial but this test specifically creates a material with multiple texture layers. Note: The GLES backend has not been updated yet; that will be done in a following commit.
2009-01-23 11:15:40 -05:00
cogl_set_source_texture (state->texture);
cogl_rectangle (x2, y1, x1, y2);
x1 = x2;
[cogl] Remove max_waste argument from Texture ctors The CoglTexture constructors expose the "max-waste" argument for controlling the maximum amount of wasted areas for slicing or, if set to -1, disables slicing. Slicing is really relevant only for large images that are never repeated, so it's a useful feature only in controlled use cases. Specifying the amount of wasted area is, on the other hand, just a way to mess up this feature; 99% the times, you either pull this number out of thin air, hoping it's right, or you try to do the right thing and you choose the wrong number anyway. Instead, we can use the CoglTextureFlags to control whether the texture should not be sliced (useful for Clutter-GST and for the texture-from-pixmap actors) and provide a reasonable value for enabling the slicing ourself. At some point, we might even provide a way to change the default at compile time or at run time, for particular platforms. Since max_waste is gone, the :tile-waste property of ClutterTexture becomes read-only, and it proxies the cogl_texture_get_max_waste() function. Inside Clutter, the only cases where the max_waste argument was not set to -1 are in the Pango glyph cache (which is a POT texture anyway) and inside the test cases where we want to force slicing; for the latter we can create larger textures that will be bigger than the threshold we set. Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Robert Bragg <robert@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2009-05-23 14:18:18 -04:00
x2 = x1 + (float)(TEXTURE_RENDER_SIZE);
/* Draw a front-facing texture polygon */
Fully integrates CoglMaterial throughout the rest of Cogl This glues CoglMaterial in as the fundamental way that Cogl describes how to fill in geometry. It adds cogl_set_source (), which is used to set the material which will be used by all subsequent drawing functions It adds cogl_set_source_texture as a convenience for setting up a default material with a single texture layer, and cogl_set_source_color is now also a convenience for setting up a material with a solid fill. "drawing functions" include, cogl_rectangle, cogl_texture_rectangle, cogl_texture_multiple_rectangles, cogl_texture_polygon (though the cogl_texture_* funcs have been renamed; see below for details), cogl_path_fill/stroke and cogl_vertex_buffer_draw*. cogl_texture_rectangle, cogl_texture_multiple_rectangles and cogl_texture_polygon no longer take a texture handle; instead the current source material is referenced. The functions have also been renamed to: cogl_rectangle_with_texture_coords, cogl_rectangles_with_texture_coords and cogl_polygon respectivly. Most code that previously did: cogl_texture_rectangle (tex_handle, x, y,...); needs to be changed to now do: cogl_set_source_texture (tex_handle); cogl_rectangle_with_texture_coords (x, y,....); In the less likely case where you were blending your source texture with a color like: cogl_set_source_color4ub (r,g,b,a); /* where r,g,b,a isn't just white */ cogl_texture_rectangle (tex_handle, x, y,...); you will need your own material to do that: mat = cogl_material_new (); cogl_material_set_color4ub (r,g,b,a); cogl_material_set_layer (mat, 0, tex_handle)); cogl_set_source_material (mat); Code that uses the texture coordinates, 0, 0, 1, 1 don't need to use cog_rectangle_with_texure_coords since these are the coordinates that cogl_rectangle will use. For cogl_texture_polygon; as well as dropping the texture handle, the n_vertices and vertices arguments were transposed for consistency. So code previously written as: cogl_texture_polygon (tex_handle, 3, verts, TRUE); need to be written as: cogl_set_source_texture (tex_handle); cogl_polygon (verts, 3, TRUE); All of the unit tests have been updated to now use the material API and test-cogl-material has been renamed to test-cogl-multitexture since any textured quad is now technically a test of CoglMaterial but this test specifically creates a material with multiple texture layers. Note: The GLES backend has not been updated yet; that will be done in a following commit.
2009-01-23 11:15:40 -05:00
verts[0].x = x1; verts[0].y = y2;
verts[1].x = x2; verts[1].y = y2;
verts[2].x = x2; verts[2].y = y1;
verts[3].x = x1; verts[3].y = y1;
verts[0].tx = 0; verts[0].ty = 0;
verts[1].tx = 1.0; verts[1].ty = 0;
verts[2].tx = 1.0; verts[2].ty = 1.0;
Fully integrates CoglMaterial throughout the rest of Cogl This glues CoglMaterial in as the fundamental way that Cogl describes how to fill in geometry. It adds cogl_set_source (), which is used to set the material which will be used by all subsequent drawing functions It adds cogl_set_source_texture as a convenience for setting up a default material with a single texture layer, and cogl_set_source_color is now also a convenience for setting up a material with a solid fill. "drawing functions" include, cogl_rectangle, cogl_texture_rectangle, cogl_texture_multiple_rectangles, cogl_texture_polygon (though the cogl_texture_* funcs have been renamed; see below for details), cogl_path_fill/stroke and cogl_vertex_buffer_draw*. cogl_texture_rectangle, cogl_texture_multiple_rectangles and cogl_texture_polygon no longer take a texture handle; instead the current source material is referenced. The functions have also been renamed to: cogl_rectangle_with_texture_coords, cogl_rectangles_with_texture_coords and cogl_polygon respectivly. Most code that previously did: cogl_texture_rectangle (tex_handle, x, y,...); needs to be changed to now do: cogl_set_source_texture (tex_handle); cogl_rectangle_with_texture_coords (x, y,....); In the less likely case where you were blending your source texture with a color like: cogl_set_source_color4ub (r,g,b,a); /* where r,g,b,a isn't just white */ cogl_texture_rectangle (tex_handle, x, y,...); you will need your own material to do that: mat = cogl_material_new (); cogl_material_set_color4ub (r,g,b,a); cogl_material_set_layer (mat, 0, tex_handle)); cogl_set_source_material (mat); Code that uses the texture coordinates, 0, 0, 1, 1 don't need to use cog_rectangle_with_texure_coords since these are the coordinates that cogl_rectangle will use. For cogl_texture_polygon; as well as dropping the texture handle, the n_vertices and vertices arguments were transposed for consistency. So code previously written as: cogl_texture_polygon (tex_handle, 3, verts, TRUE); need to be written as: cogl_set_source_texture (tex_handle); cogl_polygon (verts, 3, TRUE); All of the unit tests have been updated to now use the material API and test-cogl-material has been renamed to test-cogl-multitexture since any textured quad is now technically a test of CoglMaterial but this test specifically creates a material with multiple texture layers. Note: The GLES backend has not been updated yet; that will be done in a following commit.
2009-01-23 11:15:40 -05:00
verts[3].tx = 0; verts[3].ty = 1.0;
cogl_set_source_texture (state->texture);
cogl_polygon (verts, 4, FALSE);
x1 = x2;
[cogl] Remove max_waste argument from Texture ctors The CoglTexture constructors expose the "max-waste" argument for controlling the maximum amount of wasted areas for slicing or, if set to -1, disables slicing. Slicing is really relevant only for large images that are never repeated, so it's a useful feature only in controlled use cases. Specifying the amount of wasted area is, on the other hand, just a way to mess up this feature; 99% the times, you either pull this number out of thin air, hoping it's right, or you try to do the right thing and you choose the wrong number anyway. Instead, we can use the CoglTextureFlags to control whether the texture should not be sliced (useful for Clutter-GST and for the texture-from-pixmap actors) and provide a reasonable value for enabling the slicing ourself. At some point, we might even provide a way to change the default at compile time or at run time, for particular platforms. Since max_waste is gone, the :tile-waste property of ClutterTexture becomes read-only, and it proxies the cogl_texture_get_max_waste() function. Inside Clutter, the only cases where the max_waste argument was not set to -1 are in the Pango glyph cache (which is a POT texture anyway) and inside the test cases where we want to force slicing; for the latter we can create larger textures that will be bigger than the threshold we set. Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Robert Bragg <robert@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2009-05-23 14:18:18 -04:00
x2 = x1 + (float)(TEXTURE_RENDER_SIZE);
/* Draw a back-facing texture polygon */
Fully integrates CoglMaterial throughout the rest of Cogl This glues CoglMaterial in as the fundamental way that Cogl describes how to fill in geometry. It adds cogl_set_source (), which is used to set the material which will be used by all subsequent drawing functions It adds cogl_set_source_texture as a convenience for setting up a default material with a single texture layer, and cogl_set_source_color is now also a convenience for setting up a material with a solid fill. "drawing functions" include, cogl_rectangle, cogl_texture_rectangle, cogl_texture_multiple_rectangles, cogl_texture_polygon (though the cogl_texture_* funcs have been renamed; see below for details), cogl_path_fill/stroke and cogl_vertex_buffer_draw*. cogl_texture_rectangle, cogl_texture_multiple_rectangles and cogl_texture_polygon no longer take a texture handle; instead the current source material is referenced. The functions have also been renamed to: cogl_rectangle_with_texture_coords, cogl_rectangles_with_texture_coords and cogl_polygon respectivly. Most code that previously did: cogl_texture_rectangle (tex_handle, x, y,...); needs to be changed to now do: cogl_set_source_texture (tex_handle); cogl_rectangle_with_texture_coords (x, y,....); In the less likely case where you were blending your source texture with a color like: cogl_set_source_color4ub (r,g,b,a); /* where r,g,b,a isn't just white */ cogl_texture_rectangle (tex_handle, x, y,...); you will need your own material to do that: mat = cogl_material_new (); cogl_material_set_color4ub (r,g,b,a); cogl_material_set_layer (mat, 0, tex_handle)); cogl_set_source_material (mat); Code that uses the texture coordinates, 0, 0, 1, 1 don't need to use cog_rectangle_with_texure_coords since these are the coordinates that cogl_rectangle will use. For cogl_texture_polygon; as well as dropping the texture handle, the n_vertices and vertices arguments were transposed for consistency. So code previously written as: cogl_texture_polygon (tex_handle, 3, verts, TRUE); need to be written as: cogl_set_source_texture (tex_handle); cogl_polygon (verts, 3, TRUE); All of the unit tests have been updated to now use the material API and test-cogl-material has been renamed to test-cogl-multitexture since any textured quad is now technically a test of CoglMaterial but this test specifically creates a material with multiple texture layers. Note: The GLES backend has not been updated yet; that will be done in a following commit.
2009-01-23 11:15:40 -05:00
verts[0].x = x1; verts[0].y = y1;
verts[1].x = x2; verts[1].y = y1;
verts[2].x = x2; verts[2].y = y2;
verts[3].x = x1; verts[3].y = y2;
verts[0].tx = 0; verts[0].ty = 0;
verts[1].tx = 1.0; verts[1].ty = 0;
verts[2].tx = 1.0; verts[2].ty = 1.0;
Fully integrates CoglMaterial throughout the rest of Cogl This glues CoglMaterial in as the fundamental way that Cogl describes how to fill in geometry. It adds cogl_set_source (), which is used to set the material which will be used by all subsequent drawing functions It adds cogl_set_source_texture as a convenience for setting up a default material with a single texture layer, and cogl_set_source_color is now also a convenience for setting up a material with a solid fill. "drawing functions" include, cogl_rectangle, cogl_texture_rectangle, cogl_texture_multiple_rectangles, cogl_texture_polygon (though the cogl_texture_* funcs have been renamed; see below for details), cogl_path_fill/stroke and cogl_vertex_buffer_draw*. cogl_texture_rectangle, cogl_texture_multiple_rectangles and cogl_texture_polygon no longer take a texture handle; instead the current source material is referenced. The functions have also been renamed to: cogl_rectangle_with_texture_coords, cogl_rectangles_with_texture_coords and cogl_polygon respectivly. Most code that previously did: cogl_texture_rectangle (tex_handle, x, y,...); needs to be changed to now do: cogl_set_source_texture (tex_handle); cogl_rectangle_with_texture_coords (x, y,....); In the less likely case where you were blending your source texture with a color like: cogl_set_source_color4ub (r,g,b,a); /* where r,g,b,a isn't just white */ cogl_texture_rectangle (tex_handle, x, y,...); you will need your own material to do that: mat = cogl_material_new (); cogl_material_set_color4ub (r,g,b,a); cogl_material_set_layer (mat, 0, tex_handle)); cogl_set_source_material (mat); Code that uses the texture coordinates, 0, 0, 1, 1 don't need to use cog_rectangle_with_texure_coords since these are the coordinates that cogl_rectangle will use. For cogl_texture_polygon; as well as dropping the texture handle, the n_vertices and vertices arguments were transposed for consistency. So code previously written as: cogl_texture_polygon (tex_handle, 3, verts, TRUE); need to be written as: cogl_set_source_texture (tex_handle); cogl_polygon (verts, 3, TRUE); All of the unit tests have been updated to now use the material API and test-cogl-material has been renamed to test-cogl-multitexture since any textured quad is now technically a test of CoglMaterial but this test specifically creates a material with multiple texture layers. Note: The GLES backend has not been updated yet; that will be done in a following commit.
2009-01-23 11:15:40 -05:00
verts[3].tx = 0; verts[3].ty = 1.0;
cogl_set_source_texture (state->texture);
cogl_polygon (verts, 4, FALSE);
x1 = x2;
[cogl] Remove max_waste argument from Texture ctors The CoglTexture constructors expose the "max-waste" argument for controlling the maximum amount of wasted areas for slicing or, if set to -1, disables slicing. Slicing is really relevant only for large images that are never repeated, so it's a useful feature only in controlled use cases. Specifying the amount of wasted area is, on the other hand, just a way to mess up this feature; 99% the times, you either pull this number out of thin air, hoping it's right, or you try to do the right thing and you choose the wrong number anyway. Instead, we can use the CoglTextureFlags to control whether the texture should not be sliced (useful for Clutter-GST and for the texture-from-pixmap actors) and provide a reasonable value for enabling the slicing ourself. At some point, we might even provide a way to change the default at compile time or at run time, for particular platforms. Since max_waste is gone, the :tile-waste property of ClutterTexture becomes read-only, and it proxies the cogl_texture_get_max_waste() function. Inside Clutter, the only cases where the max_waste argument was not set to -1 are in the Pango glyph cache (which is a POT texture anyway) and inside the test cases where we want to force slicing; for the latter we can create larger textures that will be bigger than the threshold we set. Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Robert Bragg <robert@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2009-05-23 14:18:18 -04:00
x2 = x1 + (float)(TEXTURE_RENDER_SIZE);
/* Draw a regular rectangle (this should always show) */
cogl_set_source_color4f (1.0, 0, 0, 1.0);
cogl_rectangle (x1, y1, x2, y2);
/* The second time round draw beneath the first with backface
culling disabled */
[cogl] Remove max_waste argument from Texture ctors The CoglTexture constructors expose the "max-waste" argument for controlling the maximum amount of wasted areas for slicing or, if set to -1, disables slicing. Slicing is really relevant only for large images that are never repeated, so it's a useful feature only in controlled use cases. Specifying the amount of wasted area is, on the other hand, just a way to mess up this feature; 99% the times, you either pull this number out of thin air, hoping it's right, or you try to do the right thing and you choose the wrong number anyway. Instead, we can use the CoglTextureFlags to control whether the texture should not be sliced (useful for Clutter-GST and for the texture-from-pixmap actors) and provide a reasonable value for enabling the slicing ourself. At some point, we might even provide a way to change the default at compile time or at run time, for particular platforms. Since max_waste is gone, the :tile-waste property of ClutterTexture becomes read-only, and it proxies the cogl_texture_get_max_waste() function. Inside Clutter, the only cases where the max_waste argument was not set to -1 are in the Pango glyph cache (which is a POT texture anyway) and inside the test cases where we want to force slicing; for the latter we can create larger textures that will be bigger than the threshold we set. Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Robert Bragg <robert@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2009-05-23 14:18:18 -04:00
cogl_translate (0, TEXTURE_RENDER_SIZE, 0);
cogl_set_backface_culling_enabled (FALSE);
}
cogl_pop_matrix ();
/* XXX: Experiments have shown that for some buggy drivers, when using
* glReadPixels there is some kind of race, so we delay our test for a
* few frames and a few seconds:
*/
/* Need to increment frame first because clutter_stage_read_pixels
fires a redraw */
frame_num = state->frame++;
if (frame_num == 2)
validate_result (state);
else if (frame_num < 2)
g_usleep (G_USEC_PER_SEC);
}
static gboolean
queue_redraw (gpointer stage)
{
clutter_actor_queue_redraw (CLUTTER_ACTOR (stage));
return TRUE;
}
static CoglHandle
make_texture (void)
{
guchar *tex_data, *p;
CoglHandle tex;
tex_data = g_malloc (TEXTURE_SIZE * TEXTURE_SIZE * 4);
for (p = tex_data + TEXTURE_SIZE * TEXTURE_SIZE * 4; p > tex_data;)
{
*(--p) = 255;
*(--p) = 0;
*(--p) = 0;
*(--p) = 255;
}
tex = cogl_texture_new_from_data (TEXTURE_SIZE,
TEXTURE_SIZE,
COGL_TEXTURE_NONE,
COGL_PIXEL_FORMAT_RGBA_8888,
COGL_PIXEL_FORMAT_ANY,
TEXTURE_SIZE * 4,
tex_data);
g_free (tex_data);
return tex;
}
void
test_backface_culling (TestConformSimpleFixture *fixture,
gconstpointer data)
{
TestState state;
ClutterActor *stage;
ClutterActor *group;
guint idle_source;
state.frame = 0;
state.texture = make_texture ();
stage = clutter_stage_get_default ();
clutter_stage_set_color (CLUTTER_STAGE (stage), &stage_color);
group = clutter_group_new ();
clutter_container_add_actor (CLUTTER_CONTAINER (stage), group);
/* We force continuous redrawing of the stage, since we need to skip
* the first few frames, and we wont be doing anything else that
* will trigger redrawing. */
idle_source = g_idle_add (queue_redraw, stage);
g_signal_connect (group, "paint", G_CALLBACK (on_paint), &state);
clutter_actor_show_all (stage);
clutter_main ();
g_source_remove (idle_source);
cogl_handle_unref (state.texture);
if (g_test_verbose ())
g_print ("OK\n");
}