Displaying a time is more complex than it appears at first glance:
it should respect the user's choice regarding 12- our 24-hour format (but
only when supported by the locale) and follow the LC_TIME rather than the
LC_MESSAGES setting.
So rather than getting it more or less right in various places, it makes
sense to defer to a helper method which hopefully does the right thing. The
method added by this patch is based on _formatTimestamp in telepathyClient
with some minor tweaks:
- there's an additional params parameter which allows enforcing
a time-only format, even on dates other than the current one
- only a single desktop settings object is created and shared between
invocations
https://bugzilla.gnome.org/show_bug.cgi?id=745111
Input method preedit text needs to be disabled on password entries
for security and usability reasons.
IBus 1.5.7 provides the signal set-content-type so that panel UIs can
handle these special purpose input entries:
https://github.com/ibus/ibus/commit/6ca5ddb302c9
Unfortunately IBus versions older than 1.5.10 have a bug which causes
spurious set-content-type emissions when switching input focus that
temporarily lose purpose and hints defeating its intended semantics
and confusing users. We thus don't use it in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=730628
Normally users switch xkb input sources and ibus input sources.
But currently the first input source only is running. It's also good
to preload all ibus engines in the logging session so that users switch
input sources quickly without the launching time of input sources.
The following is the ibus change:
https://github.com/ibus/ibus/commit/cff35929a9https://bugzilla.gnome.org/show_bug.cgi?id=695428
Instead of calling out to gnome-settings-daemon we'll just implement
the switching logic ourselves and use mutter APIs that allow this
functionality to work both in X sessions and when we're a Wayland
compositor.
Switching IBus engines is done transparently as well just like g-s-d
used to do.
https://bugzilla.gnome.org/show_bug.cgi?id=736435
gnome-settings-daemon doesn't this for us anymore. Note that
ibus-daemon isn't DBus activatable but just spawning it is fine
because it does its own single instance management. The library
notifies us when it shows up and goes away through the connected and
disconnected signals.
https://bugzilla.gnome.org/show_bug.cgi?id=736435
The code path is completely unmaintained and untested (and probably
unused as well, considering that nobody has complained about accessing
the session object's Active property which does not exist in the
ConsoleKit case).
Most of our ConsoleKit code is already a dummy anyway, just do the
same for the remaining functionality.
https://bugzilla.gnome.org/show_bug.cgi?id=686626
When a user logs in to a wayland session, we keep the login screen
running on the X server with the login screen running in a deactivated mode.
This commit makes sure it get reactivated when the user comes back to
the VT (from user switching, logout or just ctrl-alt-f1).
https://bugzilla.gnome.org/show_bug.cgi?id=726989
The asynchronous nature of extension loading, session loading, and more,
makes the code racy as to what is initialized first, and hard to debug.
Additionally, since gjs is single-threaded, the only code we're running
in a thread anyway is readdir, which is going to be I/O bound, so the
code here is actually likely to be faster.
Drop this in favor of some good old fashioned synchronous loading.
It's important to compare the version components as integers,
not strings, so "10" evaulates as greater than "5"
This fixes the login screen in gnome 3.10.
https://bugzilla.gnome.org/show_bug.cgi?id=708691
We need to adjust the offset of close buttons, in case the box
pointer has the arrow at the top. To do so, extend close buttons
to hook into a boxpointer (since that's the common use for them)
and automatically adjust their position.
https://bugzilla.gnome.org/show_bug.cgi?id=707842
These don't go through gnome-session, so they don't properly update
its state machine. We should use these in the future when we want to
use logind user sessions, but for now, they're just a trap.
https://bugzilla.gnome.org/show_bug.cgi?id=706612
A D-Bus service can export more supported interfaces than the
shell cares about. In those cases, we avoid creating proxies,
but neglect to finish things up so the object manager class
knows it can mark itself loaded.
This commit makes sure we do the proper finishing, so the object
manager still loads in the face of unsupported interfaces.
https://bugzilla.gnome.org/show_bug.cgi?id=706542
gnome-settings-daemon monitors smartcard insertion and removal
events on the system and then exports a model of the current
smartcard topology over the bus using the D-Bus ObjectManager interface.
This commit adds the support code needed in gnome-shell to talk to
the gnome-settings-daemon service.
A future commit will use this code to inform the login screen
when a user inserts a smartcard (so it can react appropriately)
https://bugzilla.gnome.org/show_bug.cgi?id=683437
The D-Bus ObjectManager interface is fairly recent addition to the
D-Bus specification. Its purpose is to provide a standardized way
to track objects dynamically coming and going for a service, and
to track capabilities dynamically coming and going for those objects
(by means of interfaces).
This commit adds the requisite code needed to make use of the
ObjectManager interface.
It will ultimately be needed to implement smartcard support in the
login screen.
https://bugzilla.gnome.org/show_bug.cgi?id=683437
Before the fix, the message tray highlighted all urls containing "://", even
invalid ones. This change fixes this by have the message tray highlight only
the urls with http, https, ftp schemes.
Credit goes to: Phuong Vu, Liye Fu, Monica Chelliah, Owen Taylor
https://bugzilla.gnome.org/show_bug.cgi?id=661225
With fallback mode dropped, we can no longer rely on gnome-screensaver
to be installed, so we'll have cases where we are unable to lock the
screen. The user menu should not show the "Lock" item in this case,
but as UnlockDialog includes UserMenu, we cannot use the existing check
without creating a circular dependency; move the function to a more
generic place to fix.
https://bugzilla.gnome.org/show_bug.cgi?id=693403
If screen locking is enabled, the screen shield should drop down
on suspend. Currently this is achieved by either explicitly locking
the screen (when selecting "Suspend" from the user menu) or by
relying on g-s-d delaying the suspension enough time for the shield
to get into place (lid close, power button).
Systemd inhibitors offer a safer way to ensure that the screen is
locked before going to sleep, so add a small abstraction for them
in the loginManager - with inhibitors being a systemd-only feature,
the ConsoleKit path only has a dummy implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=686482
This commit removes all the code in charge of playing with the database of
mobile providers, which was originally included in order to perform
MCCMNC->OperatorName and SID->OperatorName conversions.
This logic is now exposed by libnm-gtk.
https://bugzilla.gnome.org/show_bug.cgi?id=688943
ModemManager >= 0.7 comes with a new DBus interface. This patch makes the shell
work with the new interface if the modem is detected as being exposed by the new
ModemManager (based on the device.udi string reported by NM).
https://bugzilla.gnome.org/show_bug.cgi?id=687359.
Gnome session started to track the session's active state a while
ago, so use that instead of our own ConsoleKit/logind abstraction
in LoginManager.
https://bugzilla.gnome.org/show_bug.cgi?id=693161
A simple implementation of the ES6 Map proposal, internally
done as a hash table, using System.addressOf() to support keys that
are arbitrary objects.
Should help replacing linear searches in various places around the shell.
https://bugzilla.gnome.org/show_bug.cgi?id=685926
Remove section titles for ethernet and mobile broadband, and replace
them with device status items that recognize if multiple devices are
installed in the same section, and if so automatically disambiguate.
https://bugzilla.gnome.org/show_bug.cgi?id=677142
shell_mobile_providers_parse() was returning the country information split
into a hash table with providers and a hash table with country names. This
patch merges both outputs into a single per-country object, so the parse()
method now returns a GHashTable with the following element-type:
(element-type utf8 ShellCountryMobileProvider>)
This also avoids more complex setups like returning lists inside of hash tables,
which was actually breaking either g-i or gtk-doc.
shell_mobile_providers_parse() was also modified to allow inputting the paths
of the country codes and provider list files to use. If paths are not given, the
default ones will be used. This helps us to provide test files during unit
tests.
Both the findProviderForMCCMNC() and findProviderForSid() methods are exported
out of the GSM and CDMA specific classes, and new unit tests for them are
implemented. Tests can be run manually with:
$> ./tests/run-test.sh tests/unit/mobileProviders.js
https://bugzilla.gnome.org/show_bug.cgi?id=687356.
Logind provides a Suspend method, which we should use instead of
the UPower API when available. Expose this in loginManager, using
the UPower API for the ConsoleKit implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=686482
A missing extension directory isn't worth debug spew, so check
if the error when reading the extension directory is NOT_FOUND,
and if so, suppress output.
https://bugzilla.gnome.org/show_bug.cgi?id=685466
Currently the HistoryManager consumes all arrow up/down key presses
unconditionally. Change this to only consume the event if the entry
text was actually changed, e.g. not when trying to move past the
first/last item.
https://bugzilla.gnome.org/show_bug.cgi?id=682243
Various code around had different paths for ConsoleKit and
logind. Consolidate it by making an abstract class that all
callers can use, which hides the implementation details of the
two daemons.
https://bugzilla.gnome.org/show_bug.cgi?id=682096
In preparation for accessing it in the screenshield, factor out
common code for ConsoleKit and Systemd.
Also, clean up ConsoleKit manager, as the daemon is required in
a non systemd installation. In particular:
- We allow it to be autostarted at session startup (or really,
we expect it to be already there, started by GDM during session
opening).
- We no longer silently assume that the session is active if
it can't start.
https://bugzilla.gnome.org/show_bug.cgi?id=682096
This is a bare-bones copy/replace. It does not implement ChangeLog
support. If we cannot get System Updates integration, I will implement
notification support.
https://bugzilla.gnome.org/show_bug.cgi?id=679099
When PackageKit signals that it prepared an update, offer an option
to reboot and apply it, using a helper that will setup the next
reboot and then calling to gnome-session.
https://bugzilla.gnome.org/show_bug.cgi?id=677394
When connecting to virtual machines with usb-device redirection, such as Spice
enabled vms, automount may get in the way. Specifically if auto-usbredir is
enabled in the vm-viewer, then the usbredir code and the automount code race
for who gets to the device first.
If the automount code wins the race this is a problem, since usbredir causes a
device-disconnect (iow the usb mass storage driver sees an unplug), so in the
end usbredir always wins, and we end up with a non clean potentially corrupt
filesystem. Also see:
https://bugzilla.redhat.com/show_bug.cgi?id=812972
There for the need exists to be able to inhibit gnome-shell's automounting,
since all other inhibits run through gnome-session, I've chosen to do the same
for the automount-inhibiting. I've also submitted a patch to gnome-session to
reserve flag value 16 for this, see bug 678595.
This patch adds support to gnome-shell to honor this new inhibit flag.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=678597
The dependency chain spirals out from folks->zeitgeist->xapian...and
I'm really not interested in pulling in all of that into the core
shell.
There is work on splitting out contact search into gnome-contacts; I'd
add a bug link but Bugzilla is down.
This allows us to move to a file-monitor based approach in the future.
Since we need signals, we convert the current set of functions to an
object we attach signals too, leading to the new ExtensionFinder object.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
This is seldomly used, and isn't checked in SweetTooth. Just remove
this inconsistency here rather than adding infrastructure to manage
and check it elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
Some extensions may have complex layouts with multiple subdirectories.
Currently, getCurrentExtension doesn't support this, as it uses a regex
and assume's that the last path's component's parent is all that's needed.
Fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=677001
gnome-shell-extension-prefs uses format(), but can't pull in Shell
(which is a dependency for the module), since that in turn would pull in
Meta. Fix this by moving the introspected int format function to ShellJS
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=673106
gnome-session moved away from using properties over DBus in 2008, which
means that the code in GNOME 3.0 never should have worked -- but it did,
which makes me suspect that it was a quirk of the GJS DBus implementation.
Switch over to the proper inhibitor API, which is based on methods. If
gnome-session eventually gets ported to GDBus, then we can switch back
to properties.
https://bugzilla.gnome.org/show_bug.cgi?id=672270
Although not all "Finding and reminding" applications are ready
yet, the integration with gnome-documents' search results overlaps
enough with the "Recent Items" provider to justify its removal.
https://bugzilla.gnome.org/show_bug.cgi?id=670150
Substitutions generated by configure don't resolve prefixes, so
cannot be used for paths. Config already had localedir, and next
commit will need libexecdir and sysconfdir, so just bite the bullet
and move to sed.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
Gsm.GetRegistrationInfo and Cdma.GetServingSystem return a single argument
consisting of a tuple, not three separate arguments. This is
a regression from the GDBus port.
https://bugzilla.gnome.org/show_bug.cgi?id=670005
The "extension" object is what I previously called the "helper" object.
It contains the extension importer object as well as the metadata object.
Things that were previously added on to the metadata (state, path, dir, etc.)
are now part of this new "extension" object.
With the new importer changes brought on by the extension prefs tool,
extensions are left without a way to import submodules at the global scope,
which would make them rely on techniques like:
var MySubModule;
function init(meta) {
MySubModule = meta.importer.mySubModule;
}
That is, there's now a lot more meaningless boilerplate that nobody wants
to write and nobody wants to reivew.
Let's solve this with a few clever hacks.
Allow extensions to get their current extension object with:
let extension = imports.misc.extensionUtils.getCurrentExtension();
As such, extensions can now get their own extension object before the
'init' method is called, so they can import submodules or do other things
at the module scope:
const MySubModule = extension.imports.mySubModule;
const dataPath = GLib.build_filenamev([extension.path, 'awesome-data.json']);
https://bugzilla.gnome.org/show_bug.cgi?id=668429
Add two new APIs, "launchExtensionPrefs" to let SweetTooth let the user
launch the extension preferences tool directly from the browser. To allow
SweetTooth to check if an extension can be configured, add a new key to
the 'metadata', 'hasPrefs', which is returned by the GetExtensionInfo/
ListExtensions DBus methods.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
A new tool, 'gnome-shell-extension-prefs' can load a new entry point from
extensions, 'prefs.js', which has an entry point to return a GTK+ widget.
This allows extensions to have their own preferences dialog, without each
extension needing to ship its own Python script and .desktop file.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
ExtensionUtils is a new module that has a lot of miscellaneous things related
to loading extensions and the extension system put into a place that does not
depend on Shell or St.
Note that this will break extensions that have with multiple files by replacing
the old uuid-based importer with an object directly on the meta object.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
The loop can exit with an interval of length one or one of
length zero. In the first case it is correct to check which side
of the interval to return, in the second case no comparison should
be made (since there is only one possible value).
In practice, this usually results in one comparison more than needed,
but in some cases (when the position was past the end of the array),
would call the comparator with undefined.
https://bugzilla.gnome.org/show_bug.cgi?id=666614
Adds two new functions, Util.lowerBound and Util.insertSorted,
that take an array, a value and a comparator, and find the
first position at which the value can be inserted without
violating the order, in optimal time.
https://bugzilla.gnome.org/show_bug.cgi?id=666429
The last patch in the sequence. Every place that was previously
setting prototype has been ported to Lang.Class, to make code more
concise and allow for better toString().
https://bugzilla.gnome.org/show_bug.cgi?id=664436
