gdk_display_get_pointer() sometimes returns values for the mask that
aren't part of the GdkModifierType enumeration, which gjs doesn't like
(bug 597292). Work around that by adding a C wrapper that strips out
the extra flags.
https://bugzilla.gnome.org/show_bug.cgi?id=597559
Add StIMText, which is a drop-in replacement for ClutterIMText but
uses GtkIMContext instead of ClutterIMContext.
StIMText doesn't have preedit support (would need ClutterText
changes), so isn't going to be useful for complicated input methods,
but is good enough to get dead keys and similar working.
entry.js: Simple test case of StEntry
gnome-shell.modules: Remove clutter-imcontext module
https://bugzilla.gnome.org/show_bug.cgi?id=597471
To work around a problem where libcroco < 0.6.2 can't handle
functions starting with 'r' or 'u', preconvert 'rgba' to 'RGBA'
when parsing stylesheets and then check for rgba()
case-insensitively.
(libcroco is uniformly case-sensitive, though the CSS spec requires
that ASCII should be handled case-insensitively.)
https://bugzilla.gnome.org/show_bug.cgi?id=597054
Before we hardcoded popdowns to only button 1 before. But we need
to actually pop down on the release of the activating button.
(Once the button is released, if the we don't pop-down the menu,
then subsequently we let the user use any button.)
https://bugzilla.gnome.org/show_bug.cgi?id=596371
round() is a C99 addition, so causes portability problems:
different C library versions require different #defines to
enable it. So simply avoid using it.
Property enumeration names should correspond exactly to the property names;
in particular the ACTIVE vs :checked disparity was confusing reading the
code.
http://bugzilla.moblin.org/show_bug.cgi?id=6504
Convert the StTable code from StStylable to StThemeNode. The
:row-spacing and :col-spacing GObject properties are converted
into spacing-rows and spacing-columns style properties.
A new interactive test is added for StTable.
https://bugzilla.gnome.org/show_bug.cgi?id=596811
Remove the StTable specific methods to add actors:
st_table_add_actor()
st_table_add_actor_with_properties()
Since they shadow the generic ClutterContainer add_actor() method,
and patch in our add() convenience function as we do for
StBoxLayout.
https://bugzilla.gnome.org/show_bug.cgi?id=596811
Remove the StBoxLayout:spacing GObject property, and instead make
BoxLayout look up the spacing from the CSS style. This makes it
consistent with padding and will allow the use of units. (The
removal of the GObject property entirely instead of making it an
override is consistent with how we handle color, font, padding, etc.)
https://bugzilla.gnome.org/show_bug.cgi?id=596803
Add clutter-text properties to allow getting access to the underlying
ClutterText actor. This corresponds to the get_clutter_text() methods.
The PROP_LABEL and PROP_ENTRY enum values are renamed to PROP_TEXT to
match the names of the properties that they correspond to, and the
properties of StEntry are reordered into alphabetical order.
Based on a patch from Colin Walters
https://bugzilla.gnome.org/show_bug.cgi?id=591245http://bugzilla.moblin.org/show_bug.cgi?id=6313
StBoxLayout: Make consistent that the area scrolled and clipped
to is the content area (excluding borders and padding.) Translate
back appropriately when chaining up so that the parent background
is drawn at the right place and picking on the box (if it's reactive)
picks at the right place on the screen.
clip-to-allocation is removed from StScrollView since it's just
not right - if the child has any non-moving elements, like headers or
borders, it will need to set a narrower clip. And even if the entire
child scrolls, we want to clip to an arrow that excludes the scrollbars.
https://bugzilla.gnome.org/show_bug.cgi?id=595997
When a StBoxLayout is allocated a size less than its natural size,
think "shrink" needs to be divided among the children that have
a smaller minimum size than natural size.
This is done by preferentially shrinking the children that are most
expanded from their minimum size and then increasing that set of
children until we've found enough total shrink.
A new method is used of allocating children at integral sizes - instead
of rounding the per-child extra amount to an integer (which causes
cumulative round-off errors), compute the position as we go along in
floats and round individually for each child widget.
Extend the box-layout test to include of a test of a box being set
to various widths, starting quite narrow.
http://bugzilla.moblin.org/show_bug.cgi?id=6311https://bugzilla.gnome.org/show_bug.cgi?id=595995
If the actor isn't in a stage, then setting up the adjustment
based on the actor's size (which we can't compute) and the
size of the default stage (which isn't relevant), doesn't make
sense. Just use arbitrary default values.
The adjustments will be updated to reasonable values when first
the box is first allocated.
It's not entirely clear to me why we ever want to compute the
adjustment settings this way; perhaps we should always use
default values.
http://bugzilla.moblin.org/show_bug.cgi?id=6307https://bugzilla.gnome.org/show_bug.cgi?id=595996
The CSS specification says that the background extends to the
edge of the border (settable in CSS3 with border-clip), make
BigRectangle match this by computing an "effective border color"
as 'border OVER background'.
(If we don't want this behavior - e.g., to be able to use the
transparent borders as margins, then alternatively transparent
border handling would have to be fixed in st-widget.c, since
prior to this transparent and translucent borders were handled
differently.)
https://bugzilla.gnome.org/show_bug.cgi?id=595993
The current CSS3 border-image is close to a superset of what we were
doing for -hippo-background-image. Woot! rename StThemeImage to
StBorderImage and change parsing to look for:
border-image: <url> <number>...
Rather than
-st-background-image: <url> <length>...
percentanges for the border sizes are not currently supported, neither
are the keywords for handling of the middle part. We always do 'stretch'
for now.
https://bugzilla.gnome.org/show_bug.cgi?id=595990
Use BigRectangle to draw the border and background if there's
a border width or border radius and no border image. (Only
uniform borders are supported for now with some deviations
from the CSS model noted in the comments.)
The background color and image parameters are removed from
StWidget's draw_background() method since they were not used
for StButton (the only current user) and the encapsulation
break that they presented caused some minor problems.
Add a test case for borders, and also use borders to style
the buttons in the 'inline-style' test case.
https://bugzilla.gnome.org/show_bug.cgi?id=595993
Rather than repeating the computation of borders in many different
widget subclasses, add helper functions:
st_theme_node_adjust_for_height()
st_theme_node_adjust_preferred_width()
st_theme_node_adjust_for_width()
st_theme_node_adjust_preferred_height()
st_theme_node_get_content_box()
That are used in get_preferred_width()/get_preferred_height() and
allocate() methods to consistently apply the necessary adjustments.
This allows removing the StPadding type.
Queueing a relayout when the borders/padding change is moved from
st_widget_real_style_changed() to the invoking code to allow access
to the old StThemeNode for comparison. (Should this be added as
a parameter to the signal?)
Borders are included in the geometry adjustments, but borders
are not yet drawn.
https://bugzilla.gnome.org/show_bug.cgi?id=595993
Add support for parsing and caching the border-radius property.
Different radii for the 4 corners are supported; elliptical corners
are not supported.
https://bugzilla.gnome.org/show_bug.cgi?id=595993
Add support for passing an inline-style string when creating a
StThemeNode.
Hook this up to a new 'style' property of StWidget.
Add a test case that demonstrates using this to update font sizes
on the fly.
https://bugzilla.gnome.org/show_bug.cgi?id=595991
ShellTheme replaces both StStyle and ccss_stylesheet_t.
The interface StStylable is replaced by usage of ShellThemeNode.
A concrete node class allows some significant optimizations of property
inheritance that would have been much more difficult to achieve with
the highly abstract pair of StStylable and ccss_node_t.
Some operations that were previously on StStylable (like the
::style-changed signal) are directly on NtkWidget.
Custom properties are no longer registered as param-specs; instead you
call directly into shell theme node to look up a length or color:
shell_theme_node_get_length (theme_node, "border-spacing", FALSE, &spacing);
The dependency on libccss is dropped, while preserving all existing
functionality and adding proper parsing and inheritance of font properties
and proper inheritance for the 'color' property.
Some more javascript tests for CSS functionality are added; workarounds for
a CSS bug where *.some-class was needed instead of .some-class are removed.
https://bugzilla.gnome.org/show_bug.cgi?id=595990
To each .c and .h file, add:
/* -*- mode: C; c-file-style: "gnu"; indent-tabs-mode: nil; -*- */
'gnu' is the default anyways for Emacs, but indent-tabs-mode is not,
so this sets things up to correspond to the policy of no-tabs.
http://bugzilla.moblin.org/show_bug.cgi?id=6467
Import:
HippoCanvasTheme => StTheme
HippoCanvasThemeImage => StThemeImage
HippoCanvasStyle => StThemeNode
StThemeContext is a new class managing the theme for a stage and
global properties like resolution.
test-theme.c is a newly written test program to do verification of the
style matching and property handling rules.
Various changes are made in the import:
- Comprehensive reindentation
- guint32 pixels replaced with ClutterColor
- General pseudo-class support added
- Old-fashioned (non-bordered) background image support added, though
with no support for repeat, etc.
- Bug fixes for problems revealed by test program
https://bugzilla.gnome.org/show_bug.cgi?id=595990
Remove several stale C files that we are no longer using; now
that we have a distcheck hook to catch non-distributed files, these
would otherwise prevent distchecking.
https://bugzilla.gnome.org/show_bug.cgi?id=595988
Add GObject Introspection annotations to methods where needed, in
particular adding (transfer none) to return values that don't transfer
ownership.
st_texture_cache_get_actor() and st_texture_cache_get_texture()
are annotated as (transfer none) since they return a newly
created *floating* texture.
https://bugzilla.gnome.org/show_bug.cgi?id=591245
Import the core MxWidget/MxBin and their dependencies; we use the
namespace "St" (Shell Toolkit) because it is the same length as Mx
so enabling easy sharing of code, but makes it clear that this is
a friendly fork and not a literal import.
Based on a patch by Colin Walters <walters@verbum.org>
https://bugzilla.gnome.org/show_bug.cgi?id=591245
Fix panel, app switcher, and looking glass to limit themselves to the
primary monitor, and run dialog to limit itself to the monitor
containing the currently-focused window.
The overview is also limited to the primary monitor now (with the
other monitors being blacked out), although the workspaces within the
overview are shaped like the full "screen" (the bounding box of all
monitors). To be fixed later.
https://bugzilla.gnome.org/show_bug.cgi?id=593060
Before, if the texture cache received a request to load say
the themed icon for an application multiple times (as could happen
since we have multiple application displays), it would often create
a thread for each one and in fact, load the pixbuf multiple times.
Avoid this by keeping track of outstanding requests.
https://bugzilla.gnome.org/show_bug.cgi?id=596121
This fixes a regression where we weren't using the correct event
timestamps, because for both of these we were sending an XClientMessage
to ourself.
https://bugzilla.gnome.org/show_bug.cgi?id=596262
A previous patch fixed a leak when loading items which shouldn't
be cached, but we also had a leak if two requests for the same
item were outstanding. In that case we load the pixbuf twice,
but should discard subsequent loads when we notice we've already
cached it.
https://bugzilla.gnome.org/show_bug.cgi?id=595321
The menu is needed by the app switcher as well as the overview, so
make it slightly more generic and move the code to appIcon. Also add
support for drawing the menu either to the right of or below the icon.
https://bugzilla.gnome.org/show_bug.cgi?id=590563
When the user click+hold+release over the icon, the effect we want
is for the menu to stick around.
Also, allow the user to mouse over the actual windows and select
them directly. If the user mouses over a window, reflect that in
the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=594699
Callers will generally expect _popup and _popdown to be a no-op if
the menu is already in that state; make it so.
Also change the 'popdown' signal to be 'cancelled'; this is
clearer and allows us to avoid having activate also call popdown.
https://bugzilla.gnome.org/show_bug.cgi?id=594699
We have compatibility code which detects from the window title what
an application is. However, the code didn't handle the case where
we discovered by title, but didn't have the expected .desktop file
installed.
When the user click+hold+release over the icon, the effect we want
is for the menu to stick around.
Also, allow the user to mouse over the actual windows and select
them directly. If the user mouses over a window, reflect that in
the menu.
If start_shell() threw an exception before, we'd overwrite it with
an exception in the finally() clause. Handle this and just print a message
and let the exception propagate.
Before Clutter gained accessors for event information, we had
shell_global_ functions. Now that Clutter has them, use them and
delete the ShellGlobal code.
http://bugzilla.gnome.org/show_bug.cgi?id=594561
When we have multiple windows for an application, implement the following
behavior:
* On click + immediate release, go to the most recently used
* On click, hold for 0.6s, pop up a menu with windows, filtering
the window list to just those windows.
Mouse over on the window list highlights the moused-over window.
Implement this by splitting well item into InactiveWellItem
and RunningWellItem, sharing a base class BaseWellItem.
The application menu code wants to do a popup after a given timeout
while holding. We can implement that by adding a function to
manually break the grab held by the button box.
Freeze+thaw around the hover and pressed property notification on leave
since handlers may want to depend on the pressed state on a hover
transition.
The windows we considered for both the app monitor and the overview
workspaces were the same, but the code was duplicated once in C, once
in Javascript.
On OpenSolaris /usr/bin/python is 2.4; use AM_PATH_PYTHON to find
a newer Python. (The PYTHON environment variable can also be set
before running configure to override the search.)
http://bugzilla.gnome.org/show_bug.cgi?id=578196
Add .AUTOPARALELL which is my GNU-make fix for projects to specify
that the build is parallel-safe, and to automatically parallelize.
Add a missing dependency on built sources, and specify --libtool
to be safe.
Only mouse button 1 is supposed to activate button controls; other
mouse buttons should do nothing unless there is a context menu.
Checking the click count is important, since double-clicks will
otherwise look like unpaired button presses.
http://bugzilla.gnome.org/show_bug.cgi?id=593504
There's seldom a good justification for connecting to signals on
yourself rather than using the default handler slots in the class.
But in particular using the default handler slots means that
an application can connect to ::button-press-event and get in
before the default handling, to implement a button that does
something on press.
http://bugzilla.gnome.org/show_bug.cgi?id=593503
Add an 'active' property to ShellButtonBox. This allows ShellButtonBox
to be used as a "toggle button". It's up the application to connect
it to the ::activate signal; there's no default handling of this.
(It's seldom that the only time you want to toggle a toggle button
through the user interface, so you need some connection to the backend
data store in any case. Removing the default handling all-together
prevents weird interactions.)
When we have built-in styling for ShellButtonBox the 'active' state
would be one of the elements that would be affect the styling.
http://bugzilla.gnome.org/show_bug.cgi?id=593502
shell-global.[ch]: Add shell_global_display_is_grabbed() that
uses the newly added meta_display_get_grab_op() to check
for existing grabs.
shell-status-menu.[ch]: Add shell_status_menu_is_active() to
check if the menu is popped up. Check for active grabs before
popping the menu up. Use gtk_menu_popdown() rather than
gtk_widget_hide(). Remove an excess gtk_widget_show() and
some excess casts.
panel.js: Check whether the status menu is popped up after button
release, and if it's not popped up, unhighlight the button.
Reported by Nuno Donato
http://bugzilla.gnome.org/show_bug.cgi?id=593362
gnome-shell.in: Remove the code to replace gnome-panel by attaching
to it with GDB; this was always problematical (required gdb, debug
symbols, finding the pid of gnome-panel, etc.)
gnome-shell-build-setup.sh: Require 2.26 to be in place before building
the shell; remove gdb from the list of required packages.
http://bugzilla.gnome.org/show_bug.cgi?id=593325
This is a Box subclass which adds several signals useful for implementing
"button like" behavior, such as hover and pressed states, as well as
click activation on release.
Instead of starting Xephyr automatically, require --xephyr to be
passed explicitly.
This makes the operation easier to understand and has the benefit
of allowing running in Xephyr mode when some other window manager
(like gnome-shell!) is running. We also want to emphasize that
Xephyr is a development tool, and not a good preview of the
user-interface.
http://bugzilla.gnome.org/show_bug.cgi?id=592881
In both, using our allocation directly for the child is wrong; we
should create a new allocation that's our width and height.
In ShellDrawingArea, also need to chain up to parent.
For Firefox/OpenOffice, right now we have a workaround in the
code where we look at their "title" property. However, we
weren't monitoring that property for changes, and I'm fairly
certain Firefox at least was mapping a window and then very
quickly changing its title after. So we need to handle
dynamic changes.
Split out the wm_class mapping from the title hack. It was
messy and weird to have the two mixed because they're not
at all related, and we're not trying to handle WM_CLASS changes
right now.
Explicitly connect to notify::title in the case where we had
a title fallback. When a title changes, just treat it as
an add+remove.
In the Application Menu area in the panel, hook up to app-added
and app-removed so we get notification of the active app changing.
Clean up the vendor prefix handling a bit, and add "mozilla" so that
we pick up "mozilla-firefox.desktop" from Firefox's (recent?) change
to have a WM_CLASS of "Firefox".
Separate the application monitor logic for "tracking" and "usage tracking".
The first means we associate an application with a window. The second
means we count focus time inside that window, and consider the window
interesting from a user point of view.
(Really, should probably split ShellAppMonitor into two classes along
this line, with the second consuming the first).
For the purposes of counting running applications and returning
the list of open windows for an application, skip not-usage-tracked
windows.
Together this allows us to associate the Nautilus desktop window
with the nautilus.desktop, but not show "File Manager" open all
of the time.
We now have functionality in Mutter to grab the keyboard on behalf
of a plugin. This avoids interactions with the key handling code
in Mutter that could leave the user with an inconsistent state
and no way to get out of it.
src/shell-global.[ch]: Change shell_global_grab_keyboard() and
shell_global_grab_keyboard() to shell_global_begin_modal()
shell_global_end_modal() and call mutter_plugin_begin_modal()
mutter_plugin_end_modal() rather than directly grabbing the
keyboard.
main.js: Call global.begin_modal/end_modal from Main.startModal()
and Main.endModal()
altTab.js; Remove call to Main.startModal() - we're letting Mutter
handle modality for Alt-Tab.
main.js lookingGlass.js overview.js runDialog.js: Rename
Main.startModal() to Main.beginModal() for consistency with
naming in mutter and ShellGlobal.
http://bugzilla.gnome.org/show_bug.cgi?id=590686
If Mutter exits with an exit status of 0, then that most likely
means that it was replaced by another window manager and we shoudln't
try to start the previous window manager and the panel.
(We don't actually know about the panel, but assume that if someone
is replacing us they know what they are doing.)
When Mutter exits with a signal, we know we want to restart.
When Mutter exits with a non-signal non-zero exit status, it's
ambiguous - we could be exiting because we lost the connection to
the X server, or because of a assertion failure in gnome-shell.
We assume the latter; if the X server is gone, all that will happen
is a bit of noise.
To know why Mutter exited accurately, we always wait() and
kill() the Mutter process, and then, if running in Xephyr, clean up
Xephyr afterwards. This has the nice side effect of exiting when
gnome-shell does and not forcing the user to close Xephyr manually.
http://bugzilla.gnome.org/show_bug.cgi?id=591171
The design has smaller icons in two columns. Add a new
custom display to docDisplay for it.
Clean up some of the texture cache handling for recent URIs so
it's not size-dependent, since the dash size is now different
from the default GenericDisplay size.
Use MetaGroup for a window when looking up applications. If
we know the application for a TYPE_NORMAL window in the group,
use that.
However, we aren't always going to know the application for a window. In
that case, create a fake one.
ShellAppInfo has a "transient" flag so we know not to write these
fake apps to the usage file.
Clean up the idle focus handler to better handle the case where
no window is focused, and where we don't want to track the
particular window.
Update track_window to create the fake window.
When a window goes away, we want to delete the usage.
Rewrite shell_app_monitor_get_running_apps to be based
on the window_to_app hash, because that's what has the pointer
to ShellAppInfo*. Before we were looking up all ids through
ShellAppSystem, but that shouldn't be holding a ref to transients.
Change the well display icon to be centered, since our icons for
window apps aren't 48 pixels.
We need to use the -lib variant which in turn uses the
GETTEXT_PACKAGE define, because the default translation
domain is actually mutter, not gnome-shell.
$(builddir) is not a standard automake variable. With autoconf < 2.64
it ends up getting set in every Makefile.in to '.' (because autoconf
defines it), but that is no longer the case for 2.64.
Since $(builddir) was always '.', just use that instead.
Infrastructure for localization; hook up intltool, create po/
and po/POTFILES.in. We need to call bindtextdomain/bind_textdomain_codeset.
Switch to gnome-autogen.sh to call intltool.
