As we now allow the ctrl-alt-tab popup on the lock screen, it should
be possible to navigate back from the top bar, so add the corresponding
elements to the switcher.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
The original condition the property was based on was added to make
the a11y switcher available in the login screen, though it did never
work properly - after popping up the switcher, additional tab key
presses were ignored. As we are now able to filter bindings much more
selectively, we can simplify the check and drop the sessionMode property.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
With the new flexible system in place, there's no point explicitly
hardcoding some built-in keybindings; just use the generic mechanism
for everything.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
Currently we hardcode the set of keybindings that are available in the
overview; add a generic mechanism to specify in which KeybindingModes
a keybinding should be available.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
For now we just use it to assign an identifier to modal modes in
which we want to allow some keybindings, but we don't use it for
any actual filtering; we'll start doing this shortly.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
We are currently using a hack to allow a select set of keybindings
in the overview. Implement the new MetaPlugin keybinding_filter
hook, which provides a cleaner way to achieve the same.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
Remove section titles for ethernet and mobile broadband, and replace
them with device status items that recognize if multiple devices are
installed in the same section, and if so automatically disambiguate.
https://bugzilla.gnome.org/show_bug.cgi?id=677142
Due to an oversight, the width of the password entry is currently
determined by the length of the message description. Fix the flags
so that the entry spans the entire width of the dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=684810
When updating the dash, we already avoid all animations while the
overview is hidden. However, as we are using Main.queueDeferredWork(),
updates may be deferred up to ~20 seconds while the overview is hidden.
If the overview is entered before a queued update has taken place, it
will be run immediately on map - as the overview is visible by then,
this means animating any outstanding changes.
Work around this by skipping animations during overview transitions as
well.
https://bugzilla.gnome.org/show_bug.cgi?id=686530
If the session mode has no locking support, screenshield had code to
unlock automatically, but it did so by checking the return value of
the constructor, instead of checking if the constructor was actually
callable, so it would get a TypeError before reaching the check.
https://bugzilla.gnome.org/show_bug.cgi?id=687708
At the moment, only the mouse can be used to focus and answer a chat
notification.
This adds a new keybinding (defaults to <Super>+n) to focus and expand
the active notification.
https://bugzilla.gnome.org/show_bug.cgi?id=652082
If I click on "Not listed?" in the login screen, I come to a username
field with two buttons: "Cancel" and "Sign In".
Clicking on "Sign In" doesn't actually sign me in though - it takes me
to the login entry. It would be better to rename "Sign In" to "Next" for
the username stage, therefore.
Gdm emit a signal to ask a question or a secret, but we can not know if
this is the last authentication question, hence we only use "Sign In"
for secret questions which improve the situation a lot.
https://bugzilla.gnome.org/show_bug.cgi?id=687656
When in the overview, if you move the mouse cursor over one of the
application launchers in the dash, all the unrelated windows are dimmed
both both in the window view and in the workspace view.
It helps to easily understand whether or not there are already opened
windows for this application, and where they are. It can also help in
differentiating the windows in the overview (sometimes the thumbnails
aren't precise enough to easily know which thumbnail belongs to which
application).
https://bugzilla.gnome.org/show_bug.cgi?id=657315
This has also the benefit of getting the application even if it can not
be retrieved through AppSystem, which can happen if the runtime WMClass
does not match the one of the desktop file.
This especially looked wrong with the following commits related to the
bug.
https://bugzilla.gnome.org/show_bug.cgi?id=657315
We simply hide the label when the popup is opened instead of relying
on the popup state when the hover state change.
To do this we replace the flag isMenuUp by a 'menu-state-changed' signal
on the AppWellIcon. This simplifies the dash label visibility handling
code that need additional changes for the bug.
https://bugzilla.gnome.org/show_bug.cgi?id=657315
Initializing this synchronously means that we will possibly wait for the
process to be auto-activated and answering to our call.
If the process is already running it also might not answer immediately
our request, as it might be doing sync I/O.
The right thing to do is to initialize the proxy asynchronously; there
are try/catch blocks in place for when the object is not available, or
not properly initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
This is called in the main thread, which we should never block for
synchronous I/O.
Since the operation we're wrapping is async already, just use
g_file_query_info_async() instead.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
Remote search providers install an auxiliary keyfile to specify
static information, such as the object path/bus name needed to activate
the binary. Such keyfiles also specify the application the providers
pushes results for; currently, we support two formats for application
information
- two fields, "Title" and "Icon" that specify a (translatable) title and
an icon name for display
- one field "DesktopId" that specifies the desktop file name of the
application backing the provider, which obsoletes the previous
Title/Icon syntax
Since all providers in GNOME use DesktopId now, and we need to ensure a
remote search providers is always backed by an application for future
development, this commit drops the support for the older syntax.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
Switch from a ClutterDragAction to a ClutterGestureAction, that gives
us the velocity of mouse motion at each step, and use it to compute the
animation time for completing the hide gesture.
https://bugzilla.gnome.org/show_bug.cgi?id=682537
The background is the same as the normal desktop, so we blur and
desaturate it to clearly show that it's not the normal system state.
To do so, we don't use standard ClutterEffects, to avoid the FBO
indirection. Instead, we take advantage of MetaBackgroundActor support
for GLSL code and paint the shaded background texture directly.
https://bugzilla.gnome.org/show_bug.cgi?id=682536
In some deployments showing a user list at the login
screen is undesirable.
GDM's fallback login screen has a configuration key:
org.gnome.login-screen disable-user-list false
that causes the user-list to get hidden.
This commit adds similar functionality to the normal,
shell-based login screen.
Based on a series of patches by Marius Rieder.
https://bugzilla.gnome.org/show_bug.cgi?id=660660
Right now when a user clicks "Not Listed?" they end up
seeing a session list that gets reset after they enter their
username.
This commit hides the session list until the username has
been entered.
https://bugzilla.gnome.org/show_bug.cgi?id=660660
For the "Not Listed?" case we will need to be able
to identify when the user has entered their username.
Once we have a way of tracking when the username is
entered, we can then defer showing the session list
too early, before the user can reliably pick a
session.
This username tracking will also be important for
implementing a disable-user-list configuration key.
If the config key gets toggled off at runtime, we'll
need to know if we're at a disruptive part of
the authentication process or not, so we know whether
we can can expose the user list right away, or wait
until the authentication conversation finishes.
Right now, we pass null in for an initial username,
and let the PAM machinery ask the user, which means we
have no good way of knowing when the username is entered.
This commit changes the "Not Listed?" code to ask the
user their username up front, before starting the PAM
conversation in much the same way we do if the user
picks a user from the user list.
https://bugzilla.gnome.org/show_bug.cgi?id=660660
After some changes, the tooltip label at the dash is not available
until it is visually shown. As this is not anymore a reliable
source of accessible name, we just set the accessible name
with the string used on that label.
https://bugzilla.gnome.org/show_bug.cgi?id=686583
shell_mobile_providers_parse() was returning the country information split
into a hash table with providers and a hash table with country names. This
patch merges both outputs into a single per-country object, so the parse()
method now returns a GHashTable with the following element-type:
(element-type utf8 ShellCountryMobileProvider>)
This also avoids more complex setups like returning lists inside of hash tables,
which was actually breaking either g-i or gtk-doc.
shell_mobile_providers_parse() was also modified to allow inputting the paths
of the country codes and provider list files to use. If paths are not given, the
default ones will be used. This helps us to provide test files during unit
tests.
Both the findProviderForMCCMNC() and findProviderForSid() methods are exported
out of the GSM and CDMA specific classes, and new unit tests for them are
implemented. Tests can be run manually with:
$> ./tests/run-test.sh tests/unit/mobileProviders.js
https://bugzilla.gnome.org/show_bug.cgi?id=687356.
If we lock before the user becomes active again, gnome-session will never
change presence from IDLE, and thus we'll never hide the lightbox.
Instead, install our own idle monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=687020
Entering the overview with the overlay key is done on key release but
exiting the overview on key press, which is inconsistent.
This change makes the overview hidden also on key release.
https://bugzilla.gnome.org/show_bug.cgi?id=683024
Adding a radial gradent to the dimming effect gives more depth to
the background.
Shading is computed in a GLSL fragment shader, and uses distance to
center of the screen to interpolate the darkening value to use.
Based on a patch by Pierre-Eric Pelloux-Prayer <pelloux@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=669798
The AnimatedIcon does not have an API for controlling the animation but
relies on the :visible property changes to start and stop a timeout used
to update the frame.
This has the inconvenient of having a side effect when visible is set to
true multiple times, and is not really the API expected from such
component.
Switch to a start/stop API instead. Also, update to the first frame at
startup while we are at it, since this is the expected behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=687583
You can't login until something has been entered in the password field.
We should therefore make the login button insensitive until you have
entered some text.
https://bugzilla.gnome.org/show_bug.cgi?id=687112
Notifications that are created in response to direct user actions like
"is ready" or "'foo' has been removed from favorites" should always be
displayed even though the user has marked him/herself busy.
https://bugzilla.gnome.org/show_bug.cgi?id=662900
The barrier was introduced to make the message tray hot corner
usable in multiple monitor setups. With the hot corner gone in
3.6, the pointer barrier doesn't make much sense anymore, so
remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=687457
Instead of keeping track of the old adjustment.upper keep track of the
old adjustment.value that corresponded to the bottom scroll position.
This fixes the integrated chatview not always scrolling to the bottom
by removing the assumption that page_size is constant between updates,
which is not the case as the view is presented in various different ways.
https://bugzilla.gnome.org/show_bug.cgi?id=686571
I've heard quite a bit of feedback from people who want to log out,
even if they are the sole user on their system. It doesn't seem worth
alienating them over this; so add a setting to make the 'Log out' item
always show up.
https://bugzilla.gnome.org/show_bug.cgi?id=686057
While we recreate icons on style changes elsewhere, the faded
icon in the application menu will stick around after icon theme
changes until another application is focused.
https://bugzilla.gnome.org/show_bug.cgi?id=687224
Stop pretending that VPN is a NMDevice, and split the useful bits into
a NMConnectionBased interface.
Make each connection have its own switch menu item and handle its own
status, and remove the VPN section title, which is no longer needed.
https://bugzilla.gnome.org/show_bug.cgi?id=682929
Currently the entry takes the intial key focus, but is not actually
part of the focus chain. Fix that, even though keynav does not work
too well for the dialog anyway, due to the entry consuming tab for
command completion.
https://bugzilla.gnome.org/show_bug.cgi?id=687127
If it is updated after checking, it counts the number of failures
not including the current one, so it allows one extra attempt. Instead,
by updating it before checking, we get the expected result of dropping the
curtain at the third password.
https://bugzilla.gnome.org/show_bug.cgi?id=687132
When the user has the entered the password for the second time
and clicked OK, clear messages from the previous attempt, so any
new failure is shown clearly.
https://bugzilla.gnome.org/show_bug.cgi?id=687132
Reposition the window overlay when the title changes, using the current
transformed size of the window clone.
Includes a test that changes title to a string of random length every 3 seconds.
Based on a patch by Alex Hultman <alexhultman@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=620874
While looking at how the plymouth implementation was built, I was so
short-sighted and focused on the string "_XROOTPMAP_ID" that I didn't
realize it was the name of the standard background on the root window.
Remove our own implementation, and switch to using a standard mutter
MetaBackgroundActor.
https://bugzilla.gnome.org/show_bug.cgi?id=682428
Rationale:
- Getting something out of the way should be quick;
- Very few things in the real world move linearly so, linear
animations, especially for something as big and visible as this,
felt too artificial;
- Moving the curtain out should start slower to make it feel like
having weight (it fills the whole screen after all) but quickly
accelerate towards the end to make it snappy too.
https://bugzilla.gnome.org/show_bug.cgi?id=686745
When the summary notification is open when the tray is closed, we end
up with two concurrent animations: the notification fading out, and the
tray moving away from underneath it. Sliding out the tray should be the
primary transition here, so hide the notification immediately to not
draw the user's attention away from it.
https://bugzilla.gnome.org/show_bug.cgi?id=686888
Having the close button move away from under the pointer after
clicking it is confusing and distracts from the main transition,
which is hiding the notification. Just hide it immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=682237
Rather than destroying the entire source, which is unintuitive, simply
close the notification. Removing the entire source is still possible
by right-clicking on the summary item and choosing "Remove".
https://bugzilla.gnome.org/show_bug.cgi?id=682237
GDM has a 'logo' key in its schema to allow distributors to add
some branding. It is currently placed above the user list, which
no longer works too well since the login screen lost its dialog
window. Display the logo in the top-left corner instead of the
Activities button instead.
https://bugzilla.gnome.org/show_bug.cgi?id=685852
Currently close() is a no-op when the menu has already been closed.
However, repeated calls could pass different animation parameters.
For instance in the user menu, we try to hide the menu immediately
before locking the screen, to avoid the popup jumping across the
screen while fading out - as we do this from the corresponding
item's activate handler, the closing is still animated if the menu's
own handler (which requests a full animation) is run first.
Fix this by changing close() to overwrite ongoing animations before
bailing out early.
https://bugzilla.gnome.org/show_bug.cgi?id=686484
Logind provides a Suspend method, which we should use instead of
the UPower API when available. Expose this in loginManager, using
the UPower API for the ConsoleKit implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=686482
Change the layout strategy to be more like the mockups. With less than
two rows of windows, we try to fit every window in a non-aligned situation;
with more than three rows of windows, we try to fit every window in an
aligned situation.
Based heavily on a patch from Pierre-Eric Pelloux-Prayer <pelloux@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=582650
Check an environment variable, GDM_GREETER_TEST. If 1, LoginDialog will
skip anything that fails outside a GDM session.
It is therefore possible to test the GDM greeter without installing it
system-wide, by attempting login as the already logged in user (uses the
same code path as the unlock dialog).
https://bugzilla.gnome.org/show_bug.cgi?id=683725
Ouch. This went unnoticed for a long time as by default (using
dynamic workspaces) only one workspace is added at a time, which
happens to work fine.
https://bugzilla.gnome.org/show_bug.cgi?id=686487
Hide workspace switcher if dynamic workspaces is disabled and number of
workspaces is set to one only, since the user is bound to only one workspace
and showing the switcher is redundant.
Signed-off-by: Seif Lotfy <seif@lotfy.com>
The same logic as for commit 1f30670c1d applies to the case
where we lock the screen before suspending - we don't want the
menu to jump to the opposite screen side to fade out, so remove
the animation altogether.
https://bugzilla.gnome.org/show_bug.cgi?id=686484
GDM's GSettings schema contains a 'disable-restart-buttons' key
that currently is only supported by the fallback greeter.
Implement support in the shell greeter as well.
https://bugzilla.gnome.org/show_bug.cgi?id=686247
Due to a typo, it never worked correctly. After a fix-up to the appropriate
method, the behavior is suboptimal, as the buttons only fade in the first time
the modal dialog is constructed. Just remove the fade-in behavior, rather than
keeping this non-working code around.
https://bugzilla.gnome.org/show_bug.cgi?id=677426
This is a workaround for power users for the "Show Apps" button
placement being too inconvenient to press at the bottom of the
dash favorites list.
Unity also uses Super+A to show the Apps lens.
https://bugzilla.gnome.org/show_bug.cgi?id=685738
Currently the label for the show-apps button is only updated during
drag operations, so after an item is successfully dropped on the
button, the label will still read "Remove from Favorites".
Fix this by resetting the label on drag-end.
https://bugzilla.gnome.org/show_bug.cgi?id=684627
If esc is pressed twice in succession in the unlock dialog, the curtain
is cancelled, but the dialog is cleared after the first esc cancels it,
and it's not destroyed and recreated.
https://bugzilla.gnome.org/show_bug.cgi?id=685441
The interface was declared to take an unsigned integer instead
of a boolean, as gnome-screensaver does. Due to this,
gnome-screensaver-command --activate or --deactivate does not
work when used with gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=686063
The configured calendar application might not actually be installed.
Instead of failing with an error message, hide the menu item altogether
in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=686050
Since panel corners are currently square, this doesn't really affect much,
but it's very clear what the code was supposed to be. At the same time,
also fix up a redeclaration with 'let', which technically isnt' kosher.
Adding a group to the Ctrl-Alt-Tab popup will also add it to the
focus manager. Due to that, we currently end up with two focus
groups added for the login dialog - an explicit one for the entire
dialog, and an implicit one for the main content group.
When doing keynav, we ascend in the widget hierarchy from the
currently focused actor until we find a valid focus root, so
adding a children of the dialog as focus root breaks keynav to
any actors that are not inside the main content group.
The simple fix is to use the same group in both cases.
https://bugzilla.gnome.org/show_bug.cgi?id=684730
If there are either no resident or persistent notifications, we'll
add some spacing for those boxes that may contain nothing. Make them
invisible to remove the spacing for those elements. It's possible
that we may want to be smarter about this in StBoxLayout to remove
spacing for zero-sized actors, but today is not the day.
https://bugzilla.gnome.org/show_bug.cgi?id=685919
Now that we use a different text style for the username depending on
whether the user list is expanded or not, changing the :expanded style
before the actual transition looks disruptive. Adding the style right
before fading in other items and removing it right after fading them
out gives a better result.
https://bugzilla.gnome.org/show_bug.cgi?id=685201
Currently the layout of the password prompt differs slightly between
login dialog and unlock screen - for the former, the prompt is
displayed next to the user avatar, replacing the user name, for
the latter, it is diplayed below both avatar and name.
https://bugzilla.gnome.org/show_bug.cgi?id=685201
Currently when the summary boxpointer is ungrabbed automatically
because the keyboard focus was moved outside the message tray
(for instance by selecting the overview search entry or opening
the right-click menu of a dash item), after the popup is hidden
_updateState() will grab focus and show the popup again.
Work around this by unsetting the clicked summary item when losing
focus to an actor outside the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=685156
Commit 448517032e added the message tray unconditionally to
the Ctrl-Alt-Tab popup, but while this makes sense for a normal
session, we do not want it in the login screen.
Be a bit more careful where we make the tray available.
https://bugzilla.gnome.org/show_bug.cgi?id=685914
This ensures that the desktop window's smooth fadeout when going to
the overview is in the same spot as the desktop window, which may not
always be at 0, 0.
https://bugzilla.gnome.org/show_bug.cgi?id=681159
Having the tooltip change when it's visible looks strange and glitchy.
This also makes sure that "Remove from Favorites" doesn't change, even
when the user removes their mouse cursor from it.
https://bugzilla.gnome.org/show_bug.cgi?id=685313
_moveFocusToItems seems to be called to early causing
clutter_actor_grab_key_focus not to be called.
So queue another attempt with BEFORE_REDRAW priority when
this happens to make sure we actually move the focus sucessfully.
https://bugzilla.gnome.org/show_bug.cgi?id=684650
A missing extension directory isn't worth debug spew, so check
if the error when reading the extension directory is NOT_FOUND,
and if so, suppress output.
https://bugzilla.gnome.org/show_bug.cgi?id=685466
The preference controls whether the screen should be locked when
the screensaver is activated, not whether the screen should be
locked at all. In particular after having switched to a different
user, log out should not automatically switch back to the unlocked
session, so always activate the lock when user switching.
https://bugzilla.gnome.org/show_bug.cgi?id=685536
Currently Return is used to activate the default button of a modal
dialog if no key is specified. It makes sense to allow alternatives
as the keypad's Enter key as well in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=685511
