When hovering over the entry's ClutterText, the entry itself
currently receives a leave event and updates the hover state.
Apply the same logic as StWidget itself to treat children as
part of the entry.
https://bugzilla.gnome.org/show_bug.cgi?id=620381
This patch adds ISO week dates to the calendar. Week dates are an
often used feature in business and government offices. Can be turned
on through gconf, off by default.
https://bugzilla.gnome.org/show_bug.cgi?id=603532
When dragging windows in linear view, the workspace zooms out to
allow moving the window to other workspaces. Enable the same
behaviour for items dragged from the dash.
https://bugzilla.gnome.org/show_bug.cgi?id=618055
While zoomed out, the workspaces view's drop target spans the entire
monitor to implement reactive screen edges. When a drop event is not
handled by the view, an attempt is made to pass it on down the stack,
but it doesn't work properly. Fix it by iterating the target's parents
as well.
Also improve the code which translates dnd coordinates to target
positions.
https://bugzilla.gnome.org/show_bug.cgi?id=619203
Ignore the fullscreen flag when we are in the overview,
otherwise we might up not showing actors like the panel even though
they have visibleInOverview set to true.
https://bugzilla.gnome.org/show_bug.cgi?id=619693
Compute a frame rate for the period between:
- User sees first frame of overview animation
- User sees fully zoomed-out overview
And replace the current Frames count metrics with this. The
previous frame count metrics were actually over the period from
the start of the animation until the window labels finished
animating in; here we are careful to look at a more restricted
period.
https://bugzilla.gnome.org/show_bug.cgi?id=619521
Add an event when we receive an event on buffer swap completion; we'll
only get this if Clutter is using the INTEL_swap_event GLX extension,
but it's useful to see the actual timing of video frames.
The recorded event includes the actual timestamp of the swap, since
we are given that in the GLX event - on my system it tends to be
consistently 80-100us before we log the event, but if something was
going wrong in event handling (too much synchronous work), then that
could could show up as a longer delay.
https://bugzilla.gnome.org/show_bug.cgi?id=619516
Add events when we start preparing a frame and finish preparing
a frame. (In addition to measuring property-updating overhead, this allows
us to see the interval between finishing preparing a frame and starting
painting the frame, which is the relayout time.)
https://bugzilla.gnome.org/show_bug.cgi?id=619515
Currently, the drag and drop code assumes that on a successful drop
the target will either consume the drag actor or that it is otherwise
OK to destroy the actor.
As the drag behavior for window preview was changed, dropping a preview
on the dash now results in the preview being swallowed - to fix, add an
option to restore the actor in case of a successful drop as well.
https://bugzilla.gnome.org/show_bug.cgi?id=619203
The activities overview is not a place where we expect users to
interact with a specific application, so showing the application
menu there is misleading.
https://bugzilla.gnome.org/show_bug.cgi?id=618479
Currently shadows disregard the overall opacity, so e.g. setting
an ancestor's opacity does not effect the shadow. Fix this by
deferring the setting of the shadow's color until it is painted.
Also move duplicated drawing code from st_theme_node_paint() into
its own function.
https://bugzilla.gnome.org/show_bug.cgi?id=619083
The preference dialog for the panel clock does not set its gettext
domain, so it's not translated even if though translations are
already available.
Fix by setting the domain in the GtkBuilder file and binding the
domain to the locale directory.
https://bugzilla.gnome.org/show_bug.cgi?id=618873
There are some places in the code where we use both fixed positioning
and CSS. Currently we use either a combination of ClutterGroup and StBin,
or we uses StBoxLayout with fixed positioning. Replace those with the new
StGroup container.
https://bugzilla.gnome.org/show_bug.cgi?id=613907
Currently the size of an StGroup depends exclusively on the group's
children - it should be possible to override this behaviour with
fixed values in the CSS.
https://bugzilla.gnome.org/show_bug.cgi?id=613907
Update the GNOME Shell version to 2.31.2, and make corresponding
updates to dependencies:
clutter => 1.2.8
mutter => 2.31.2
gobject-introspection => 0.6.11
gjs => 0.7
First, simply set the ellipsize flag on the application menu labels.
Next, rework how we lay out the panel components so that the center
box is always centered and constrains the left and right, rather
than pushing it around.
Previously, as part of making the shell not obviously explode if
one had a lot of tray icons, we allowed them to push the clock over.
Instead, go back to just failing in this case; we need to exile legacy
tray icons, not be slightly less ugly.
https://bugzilla.gnome.org/show_bug.cgi?id=592640
SwitcherList.actor is no longer a St.BoxLayout but a
GenericContainer now, so the hack in AppSwitcher._getPreferredHeight is no
longer needed (it is called with the correct width now).
https://bugzilla.gnome.org/show_bug.cgi?id=613194
Typo: 10000000 instead of 1000000 for a million. Also, use
G_INT64_CONSTANT instead of LL for a 64-bit constant, to avoid
extraneous 128-bit arithmetic on 64-bit machines.
Add a command line option to upload the generated performance report
to a web service. The options for the upload (url, system name, secret
key) are read from ~/.config/gnome-shell/perf.ini.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Switch from having separate METRICS and METRIC_DESCRIPTIONS objects
in a perf module to a single METRICS array. This is done so the
perf module can define the units for each metric.
In addition to improving the output in the web interface, the purpose
of having units is to give some clue about how to pick from multiple
values from different runs. In particular, with the assumption that
"noise" on the system will increase run times, for time values we want
to pick the smallest values, while for "rate" values, we want to pick
the largest value.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add --perf-output=<filename> option to gnome-shell that combines
the reports written for each run by the C/Javascript code into
a complete report.
If this option is not specified, a brief human-readable summary
is printed to stdout instead.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
When SHELL_PERF_OUTPUT is set, instead of just dumping out the metrics, dump
a more complete report with:
- Event descriptions
- Metric descriptions and value
- Event log
Helper functions shell_perf_log_dump_events() and shell_perf_log_dump_log()
are added to ShellPerfLog to support this. The gnome-shell wrapper is adapted
to deal with the changed report format.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add a helper function to write a string as UTF-8 to a GOutputStream.
The signature of GOutputStream:
gboolean g_output_stream_write_all (GOutputStream *stream,
const void *buffer,
gsize count,
gsize *bytes_written,
GCancellable *cancellable,
GError **error);
Can't currently be handled by GJS.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add gnome-shell options:
--perf-iters=ITERS"
Numbers of iterations of performance module to run
--perf-warmup
Run a dry run before performance tests
Make a successful run of a performance test return 0 not non-zero,
and handle the difference between that and a 0-exit in normal
usage (meaning replaced) in the wrapper.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Move the code that starts gnome-shell and waits for it to exit
to a function in preparation for running it multiple times when
doing iterations of a performance test.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add some basic statistics for allocated memory based on mallinfo(),
and use that to define two metrics:
usedAfterOverview: bytes used after the overview is shown once
leakedAfterOverview: additional bytes used when the overview is
shown a second time.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add a facility for defining and recording numeric statistics
as performance events
shell_perf_log_define_statistic()
Define a statistic and the corresponding event type
shell_perf_log_update_statistic_[ix]() -
Update the stored statistic value
shell_perf_log_add_statistics_callback()
Add a function called before collecting statistics
shell_perf_collect_statistics()
Update statistics and record events for them
In addition to the explicit collection, statistics are
recorded at a periodic interval (currently 5s)
https://bugzilla.gnome.org/show_bug.cgi?id=618189
We want to be able to summarize the behavior of the shell's
performance in a series of "metrics", like the latency between
clicking on the Activities button and seeing a response.
This patch adds the ability to create a script under perf/
in a special format that automates a series of actions in the
shell, writing events to the performance log, then collects
statistics as the log as replayed and turns them into a set
of metrics.
The script is then executed by running as gnome-shell
--perf=<script>.
The 'core' script which is added here will be the primary
performance measurement script that we use for shell performance
regression testing; right now it has a couple of placeholder
metrics.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
ShellPerfLog provides a way for different parts of the code to
record information for subsequent analysis and interactive
exploration. Events exist of a timestamp, an event ID, and
arguments to the event.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
To support scheduling performance-measurement scripts that want to run
a number of actions in series, add shell_global_run_at_leisure() to run
a callback when all work is finished.
The initial implementation of this is not that accurate: we track
business in Tweener.js via new shell_global_begin_work(),
shell_global_end_work() functions, and we also handle the case
where the main loop is continually busy.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
