This is seldomly used, and isn't checked in SweetTooth. Just remove
this inconsistency here rather than adding infrastructure to manage
and check it elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
This allows us running uninstalled. While we're at it, though, remove
JHBUILD_TYPELIBDIR. jhbuild shell should add its own stuff to GI_TYPELIB_PATH,
and we don't want to half reimplement jhbuild. The wrapper script should be
solely for the case of running from the source directory, and not care about
jhbuild at all.
We now require Mutter 3.4.1 for the API change to
meta_display_add_keybinding(). (This is a run-time requirement, not
a build-time requirement, since the usage is from Javascript.)
* Add a keyring prompter based on GcrSystemPrompter
* Adds dependency on gcr version 3.3.5 or higher
* Not yet using unmerged support for non-pageable memory
https://bugzilla.gnome.org/show_bug.cgi?id=652459
Empathy uses to support 2 D-Bus API for calls:
- StreamedMedia: legacy API
- Call.DRAFT: experimental version of the new API
Since 3.3.90, Empathy only supports Call1, the first stable version of the new
API, so the Shell should do the same.
https://bugzilla.gnome.org/show_bug.cgi?id=667694
Substitutions generated by configure don't resolve prefixes, so
cannot be used for paths. Config already had localedir, and next
commit will need libexecdir and sysconfdir, so just bite the bullet
and move to sed.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
ConsoleKit is being obsoleted by systemd. Accordingly port the CK logic
in the gnome-shell automount manager to systemd-logind APIs.
This makes use of systemd-logind's native C APIs which are much easier
to use than the D-Bus APIs in this case, and much faster too (since they
are synchronous and directly query the kernel for the information we
need). The dependency is compile time optional, and in order to be nice
to the Debian folks g-s compiled with this enabled fill automatically
fall back to CK support on systems lacking systemd.
Even with --enable-compile-warnings=error, avoid erroring out on deprecations
for the moment, since we are hitting many Clutter deprecations and some are
hard to fix.
For the Intel drivers, using glReadPixels() to read into client-memory
directly from the frame buffer is much slower than creating a pixel
buffer, copying into that, and then mapping that for reading. On other
drivers, the two approaches are likely to be similar in speed. Create
a ShellScreenGrabber abstraction that uses pixel buffers if available.
Use that for screenshots and screen recording.
https://bugzilla.gnome.org/show_bug.cgi?id=669065
Cogl does not explicitly link against GL or GLES any more, and Clutter
master dropped the 'gl' pkg-config requirement because it introduced
unneeded and conflicting dependencies.
GNOME Shell still uses glXQuery* API, so it needs to explicitly link
against libGL.
https://bugzilla.gnome.org/show_bug.cgi?id=667864
Rewrite code acquiring dbus names so that it uses GDBus, and rewrite
ShellDBus so that it is exposed on the GDBus connection. Ports of
the other objects will follow.
https://bugzilla.gnome.org/show_bug.cgi?id=648651
libsoup won't check for a valid cert by default, so copy some logic from
glib-networking to check against the system cert list. Additionally, allow a
fallback for developers, ~/.local/share/extensions.gnome.org.crt, for easy
local development of the website.
https://bugzilla.gnome.org/show_bug.cgi?id=658870
This adds contacts search to shell, powered by libfolks.
Changes:
- Add Folks and Gee to the build system
- ShellContactSystem, a backend in C
- ContactDisplay, search frontend in JS
https://bugzilla.gnome.org/show_bug.cgi?id=643018
A network agent is a component that stores network secrets (like
wifi passwords) in the session keyring. This commit adds an
implementation of it to be used by the shell network dialogs. It
handles most of the keyring stuff, delegating the UI to upper layers.
https://bugzilla.gnome.org/show_bug.cgi?id=650244
Add a helper function (mostly copied from gtkcalendar.c) for getting
the first week day for the current locale, using nl_langinfo if
available and falling back to the GTK+ gettext fallback otherwise.
Use that function in the calendar, so that the LC_TIME setting is
used if possible.
https://bugzilla.gnome.org/show_bug.cgi?id=649078
Clutter 1.7.x introduced CLUTTER_CAIRO_FORMAT_ARGB32: which can be used when
sharing textures/data with cairo without having to do check the
byte order and choose the appropriate format by hand.
https://bugzilla.gnome.org/show_bug.cgi?id=654577
The sniffer is a simple helper process, activated as a DBus service,
that tries to crawl as many files as possible in the provided target
directory (i.e. the new mount's root), for a maximum amount of time -
which is set here to 1.5 seconds (i.e. it will crawl either all the
files in the directory tree, or as many as it can before the specified
timeout expires).
Crawled files are ordered by their content type, and a generic estimation
of the type of files composing the directory is returned to the caller,
using generic 'x-content/*' mimetypes.
The process will then set an autoquit timeout on itself, which can be
disabled by setting the env variable HOTPLUG_SNIFFER_PERSIST for
debugging purposes. The HOTPLUG_SNIFFER_DEBUG env variable can also be
set to enable debugging output.
https://bugzilla.gnome.org/show_bug.cgi?id=653520
This is needed if we are handling an incoming text channel and then user tries
to open a chat with the same contact using Empathy. In this case, the Shell
should delegate the channel back to Empathy and just continue observing it as
it does for usual outgoing channels.
Depends on telepathy-glib 0.15.3 as
tp_base_client_set_delegated_channels_callback() has been added in this
version.
https://bugzilla.gnome.org/show_bug.cgi?id=654237
Most importantly, the new variables include an rpath for the gnome-bluetooth
directory which fixes a linking problem; introspetion needs to be able to find
the library while running the introspected binary at build time.
Also, this removes some hardcoding in the configure script.
As the Shell does more than observing channels (users can interact with them),
it has to be an Handler as well. We have to make sure that all the new
incoming text channels are handled by the Shell by default, so we make it an
Approver as well.
From an user point of view, the only difference is that Empathy's tray icon
will stop blicking when receiving new channels.
We rely on ChannelDispatcher.DelegateChannels() and PresentChannel() to
interact with Empathy. Those methods have been implemented in
telepathy-mission-control 5.9.0 and telepathy-glib 0.15.0.
The tests were broken again, because since Shell-0.1.gir now has
'shared-library="libgnome-shell.so"', the references to Shell.PerfLog
ended up pulling in libgnome-shell in addition to the copy of
shell-perf-log.c that libjs-test was built with.
Fix all this hopefully forever by just making run-js-test link to
libgnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=649203
Instead of rolling our own code, use new libnm-glib functions to do
the same thing. Requires libnm-glib as of
779215c742bbe29a2c66202ec7e2e6d43edeb8ff (which will be part of 0.9).
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=648648
When jhbuilding, we use a jhbuilt gobject-introspection, so the
default typelib path is the jhbuild prefix, not /usr. So if we are
using NetworkManager from packages, we need to adjust GI_TYPELIB_PATH
to include it.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
Build gnome-shell as a binary linked against libmutter-wm, instead of
a module to be loaded by libmutter-wm. Move the majority of
initialization-type stuff from gnome_shell_plugin_start() into main().
We still build libgnome-shell as a shared library, so that the linker
doesn't discard all the methods that are never called from C.
https://bugzilla.gnome.org/show_bug.cgi?id=641724
Instead of defining rules manually, use the included make support,
which means Makefiles are less prone to API changes, support
verbosity correctly (instead of inconsistently hardcoding --quiet),
are cleaner to read, and emit GISCAN/GICOMP instead of GEN (which
is nicer).
https://bugzilla.gnome.org/show_bug.cgi?id=643371
The current gnome-shell.in script has a huge amount of
unnecessary complexity for the installed, normal case. Fix
this by adding a configure option (defaulting to false) that
installs a simple, obvious wrapper script around mutter.
We do change the gnome-shell build setup to pass this option
by default for jhbuild.
https://bugzilla.gnome.org/show_bug.cgi?id=642084
Unfortunately the evolution-data-server client-side libraries seem to
block the calling thread. This is a major problem as we must never
ever block the main thread (doing so causes animations to flicker
etc.). In the worst case, this problem causes login to hang (without
falling back to fall-back mode) and in the best case it slows down
login until a network connection is acquired.
Additionally, in order to sanely use these evolution-data-server
libraries, GConf has to be involved and GConf is not thread-safe. So
it's not really feasible just moving the code to a separate
thread. Therefore, move all calendar IO out of process and use a
simple (and private) D-Bus interface for the shell to communicate with
the out-of-process helper.
For simplification, remove existing in-process code since internal
interfaces have been slightly revised. This means that the shell is no
longer using any native code for drawing the calendar dropdown.
https://bugzilla.gnome.org/show_bug.cgi?id=641396
Signed-off-by: David Zeuthen <davidz@redhat.com>
Since Ubuntu patches clutter-1.0.pc to remove x11 from the requires,
we have to list it explicitly for places we use X11 functions, like
ST and the shell recorder.
https://bugzilla.gnome.org/show_bug.cgi?id=643003
A PolicyKit Authentication Agent is a construct used to authenticate
one or more identities. See the PolicyKit documentation for more
details on authentication agents and how PolicyKit works:
http://hal.freedesktop.org/docs/polkit/
Since gjs does not support subclassing a GObject class from Javascript
code, we bring in a native class to bridge the VFuncs to GObject
signals. Additionally, this native class also queues up authentication
requests so the user of the native class only has to deal with a
single outstanding request at any one time.
The file js/ui/polkitAuthenticationAgent.js introduces a singleton
that listens for authentication requests via the native class. This
singleton uses the PolkitAgent machinery to do the actual heavy-weight
lifting required for authentication (essentially a PAM conversation).
We currently don't allow the user to pick the identity to be
authenticated.
https://bugzilla.gnome.org/show_bug.cgi?id=642886
Signed-off-by: David Zeuthen <davidz@redhat.com>
The official GNOME moduleset builds evolution and e-d-s against
GTK+-3, so libedataserverui-1.2 is no longer part of the release.
As GNOME Shell can actually be build with either version, prefer
libedataserverui-3.0 if it is available and allow falling back
to 1.2. if it isn't.
https://bugzilla.gnome.org/show_bug.cgi?id=641085
Add an entry in config.js.in for PACKAGE_VERSION and GJS_VERSION,
to be used by the notification daemon and in the future by the
extension system.
https://bugzilla.gnome.org/show_bug.cgi?id=639255
Mutter no longer optionally builds with GTK+-2.0, so we don't
need to check for it. And the specific form of the check broke
with recent changes to the naming of libraries for GTK+.
In order to take advantage of clipped redraws (only redraw the
parts that actually changed), we have to inform clutter about
our paint_volume by implementing the get_paint_volume virtual
method.
As this feature had been added in in clutter 1.5.x we now require
that.
https://bugzilla.gnome.org/show_bug.cgi?id=630932
We were going to great effort to include the normal directories in the
GJS search path and the code to to do this broke recently when
jsdir and jsnativedir were moved to gjs-internals-1.0.pc. However, it
was actually unnecessary since the standard directories are appended
to the default path.
(We continue to use a GNOME_SHELL_JS envvar separate from GJS_PATH
for the Shell to enable the somewhat unlikely case where someone wants
to invoke the shell specifying a GJS_PATH.)
https://bugzilla.gnome.org/show_bug.cgi?id=635367
ST makes use of GTK+ for input methods and for icon themes; therefore
we have need to initialize GTK+ in order to test these parts of Clutter.
Instead of LD_PRELOADING our module, use a separately compiled executable
that links to the UI components in GNOME Shell, initializes Clutter and
GTK+ and hooks them together.
Getting all the symbols from St and the GUI components exported for
use via GJS requires a bit of contortion: we need to actually link the
St convenience library into a shared library and link the executable
to that since there is no way with libtool to take a convenience library
and put all its symbols into an executable --whole-archive style.
https://bugzilla.gnome.org/show_bug.cgi?id=633657
Gjs changed to separate the "basic" API from "embedder" API. Unfortunately
due to our use of the importer API and a few other bits, we need to use
the "module" one. In the future I plan to extend the core API to
support this use case.
Add volume control indicator which uses API from gnome-volume-control
to interact with PulseAudio and shows both input and output volumes.
Also adds a small wrapper around libcanberra in ShellGlobal, used by the
volume indicator to provide auditive feedback.
https://bugzilla.gnome.org/show_bug.cgi?id=629455
The library is introspected, and should not require using
Pulseaudio directly.
With help from Giovanni Campagna <scampa.giovanni@gmail.com>
(introspection annotations, build fixes)
https://bugzilla.gnome.org/show_bug.cgi?id=629455
If mutter was compiled with GTK+-2.0, the build will fail with a
rather cryptic message - better fail early during configure with
a proper error message.
https://bugzilla.gnome.org/show_bug.cgi?id=623889
Use GSettings for all Shell configuration. GConf is kept to read
configuration from external programs (Metacity, Nautilus and Magnifier),
but ShellGConf is removed because it's mostly useless for the few calls
we still have. Also get rid of unused GConf code in ShellAppSystem.
A basic GConf schema is still used to override Metacity defaults and
configure Magnifier in a system-wide fashion. GConf is also used as
GSettings backend via the GSETTINGS_BACKEND environment variable.
All of this will be removed when these programs have been ported
to GSettings and able to use dconf.
GLib 2.25.9 is required. Schemas are converted to the new XML format,
and compiled at build time in data/ so that the Shell can be run from
the source tree. This also requires setting the GSETTINGS_SCHEMA_DIR
environment variable both when running installed or from source tree,
in src/gnome-shell.in and src/gnome-shell-clock-preferences.in.
https://bugzilla.gnome.org/show_bug.cgi?id=617917
Update the GNOME Shell version to 2.31.2, and make corresponding
updates to dependencies:
clutter => 1.2.8
mutter => 2.31.2
gobject-introspection => 0.6.11
gjs => 0.7
To replace all calls to deprecated code, GTK+ 2.20 is required - add
some basic compatibility code, so that is still possible to build the
shell with GTK+ 2.18 when not using -DGSEAL_ENABLE.
https://bugzilla.gnome.org/show_bug.cgi?id=618258
With the transition to GTK+ 3.0, direct access to struct members
will no longer be possible.
This bumps the required minimum version of GTK+ to 2.20.
https://bugzilla.gnome.org/show_bug.cgi?id=618258
- Specify a minimum version of clutter-1.2.0
- Switch clutter branch in the moduleset to master
- Replace deprecated cogl_texture/material_unref() with
cogl_handle_unref()
- Use cogl_clip_push_rectangle() rather than cogl_clip_push()
- Replace cogl_check_extension() with strstr - should be
accurate enough.
https://bugzilla.gnome.org/show_bug.cgi?id=610679
Brute force merge these two by essentially replacing St.TextureCache
with a (renamed) Shell.TextureCache.
One function was added for convenience, namely "st_texture_cache_load_file_simple".
St.TextureCache had a function to load a texture from a filename, and it
returned NULL on error but only half the callers actually checked this. This
function is better.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
The recent cleanup of the configure.ac cleanups accidentally
removed AC_SUBST(GETTEXT_PACKAGE); more precisely restore this
section back to its original state.
https://bugzilla.gnome.org/show_bug.cgi?id=610787
Remove unnecessary checks for headers and functions, revert
changes to internationalization that introduced duplication.
(Based on a patch by Javier Jardón)
https://bugzilla.gnome.org/show_bug.cgi?id=609205
Add StIMText, which is a drop-in replacement for ClutterIMText but
uses GtkIMContext instead of ClutterIMContext.
StIMText doesn't have preedit support (would need ClutterText
changes), so isn't going to be useful for complicated input methods,
but is good enough to get dead keys and similar working.
entry.js: Simple test case of StEntry
gnome-shell.modules: Remove clutter-imcontext module
https://bugzilla.gnome.org/show_bug.cgi?id=597471
ShellTheme replaces both StStyle and ccss_stylesheet_t.
The interface StStylable is replaced by usage of ShellThemeNode.
A concrete node class allows some significant optimizations of property
inheritance that would have been much more difficult to achieve with
the highly abstract pair of StStylable and ccss_node_t.
Some operations that were previously on StStylable (like the
::style-changed signal) are directly on NtkWidget.
Custom properties are no longer registered as param-specs; instead you
call directly into shell theme node to look up a length or color:
shell_theme_node_get_length (theme_node, "border-spacing", FALSE, &spacing);
The dependency on libccss is dropped, while preserving all existing
functionality and adding proper parsing and inheritance of font properties
and proper inheritance for the 'color' property.
Some more javascript tests for CSS functionality are added; workarounds for
a CSS bug where *.some-class was needed instead of .some-class are removed.
https://bugzilla.gnome.org/show_bug.cgi?id=595990
Import:
HippoCanvasTheme => StTheme
HippoCanvasThemeImage => StThemeImage
HippoCanvasStyle => StThemeNode
StThemeContext is a new class managing the theme for a stage and
global properties like resolution.
test-theme.c is a newly written test program to do verification of the
style matching and property handling rules.
Various changes are made in the import:
- Comprehensive reindentation
- guint32 pixels replaced with ClutterColor
- General pseudo-class support added
- Old-fashioned (non-bordered) background image support added, though
with no support for repeat, etc.
- Bug fixes for problems revealed by test program
https://bugzilla.gnome.org/show_bug.cgi?id=595990
js/ui/environment.js: Split out initial UI setup (Tweener initialization,
ClutterContainer monkey-patching) into a separate file we can import from tests.
tests/: Directory for various types of tests
tests/run-test.sh: Shell script that to run tests with an appropriate
environment set up.
tests/testcommon/: Common modules and data for tests
tests/interactive/: Interactive tests
tests/interactive/box-layout.js: A sample test of StLayout
https://bugzilla.gnome.org/show_bug.cgi?id=595987
Import the core MxWidget/MxBin and their dependencies; we use the
namespace "St" (Shell Toolkit) because it is the same length as Mx
so enabling easy sharing of code, but makes it clear that this is
a friendly fork and not a literal import.
Based on a patch by Colin Walters <walters@verbum.org>
https://bugzilla.gnome.org/show_bug.cgi?id=591245
On OpenSolaris /usr/bin/python is 2.4; use AM_PATH_PYTHON to find
a newer Python. (The PYTHON environment variable can also be set
before running configure to override the search.)
http://bugzilla.gnome.org/show_bug.cgi?id=578196
Infrastructure for localization; hook up intltool, create po/
and po/POTFILES.in. We need to call bindtextdomain/bind_textdomain_codeset.
Switch to gnome-autogen.sh to call intltool.
This is a start at the "Active Appliction Item" component of the
shell design. Currently we just show the currently focused
application. When launching a new application, we show that as well.
The implementation here is not complete; basically when launching
we de-focus the active one, and the application well shows the
most recent startup sequence.
This kind of fails in the case of multiple sequences, and we
also don't correctly de-focus the current window in other
launch paths.
When AM_SILENT_RULES is available, use it to strip down the output
of make so we can see what's important rather than gigantic long
compile lines.
Use 'make V=1' to see everything again.
Fix a couple of places where we had 'cmp' rather than 'cmp' and were
getting standard-error spew about missing files when generating
enum-types.h files.
http://bugzilla.gnome.org/show_bug.cgi?id=591002
When compiling with GCC turn on -Wmissing-prototypes, and by default
turn on -Werror as well.
As with most gnome modules:
--enable-compile-warnings=minimum/maximum
Can be used to disable -Werror (they are the same)
http://bugzilla.gnome.org/show_bug.cgi?id=590998
Before, we looked up application data in several ways; the ShellAppSystem
exported just application ids (though it parsed the .desktop files internally),
and we'd create a Gio.DesktopAppInfo object (reparsing the desktop file again),
wrapping that inside a JavaScript AppInfo class, and finally the AppDisplay
would again parse the .desktop file to get the categories.
Also, to look up applications by id previously, we traversed the entire
menu structure each time.
Some qualities such as the NoDisplay flag were not easily exposed in the old
system. And if we wanted to expose them we'd have to change several different
application information wrapper classes.
All in all, it was quite suboptimal.
The theme of this new code is basically "just use libgnome-menus". We do
not call into Gio for app lookups anymore. The new Shell.AppInfo class
is a disguised pointer for the GMenuTreeEntry item.
To fix the caching, we keep a simple hash table of desktop id -> ShellAppInfo.
This lets us share the recent-app-tracking, recent-file-tracking, and
icon-drawing code between the overlay and the sidebar, without the
sidebar having to poke into AppDisplayItem and DocDisplayItem's guts.
Use code copied from GLib to close all file descriptors before we reexec ourselves
on the restart Alt-F2 command. This fixes serious memory leaks when we have mapped
graphics buffers.
http://bugzilla.gnome.org/show_bug.cgi?id=579776
The overlay looks nicer with the root window pixmap drawn on the
background. It is scaled up to twice the size, with positioning
based on the rule of thirds.
The sideshow animations shown when entering or leaving the
overlay and toggling the extended view were implemented by
Marina Zhurakhinskaya. They replace the old method of having a
black rectangle behind the workspaces that partly covers the
sideshow during transitions.
configure.ac: Add gdk-x11, clutter-x11 and clutter-glx modules.
overlay.js: Add a root window pixmap actor, make sideshow width
definitions more logical, replace the way the sideshow
animates when entering or leaving the overlay.
workspaces.js: Remove the backdrop, add helper functions for the
overlay transitions.
shell-global.[ch]: Add a method that creates an actor displaying
the root window pixmap and returning clones of it.
ShellAppMonitor now depends on gmenu to load menus.
Use the menu data from ShellAppMonitor to show a menu list.
GenericDisplay implementations can now have a sidebar area. We
handle keystrokes such as left/right explicitly.
Some internal API changes to account for the fact that a display
can have another filter in addition to the search.
