mutter/po/id.po
2017-07-23 02:46:38 +00:00

681 lines
22 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Indonesian translation of mutter.
# Copyright (C) 2003 THE mutter'S COPYRIGHT HOLDER
# This file is distributed under the same license as the mutter package.
#
# Mohammad DAMT <mdamt@bisnisweb.com>, 2003-2005.
# Ahmad Riza H Nst <rizahnst@eriagempita.co.id>, 2006.
# Dirgita <dirgitadevina@yahoo.co.id>, 2011, 2012, 2014.
# Andika Triwidada <andika@gmail.com>, 2011-2015.
msgid ""
msgstr ""
"Project-Id-Version: mutter master\n"
"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?"
"product=mutter&keywords=I18N+L10N&component=general\n"
"POT-Creation-Date: 2017-07-19 09:20+0000\n"
"PO-Revision-Date: 2017-07-23 09:46+0700\n"
"Last-Translator: Andika Triwidada <andika@gmail.com>\n"
"Language-Team: Indonesian <gnome-l10n-id@googlegroups.com>\n"
"Language: id\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 1.8.11\n"
"Plural-Forms: nplurals=1; plural=0;\n"
#: data/50-mutter-navigation.xml:6
msgid "Navigation"
msgstr "Navigasi"
#: data/50-mutter-navigation.xml:9
msgid "Move window to workspace 1"
msgstr "Pindahkan jendela ke ruang kerja 1"
#: data/50-mutter-navigation.xml:12
msgid "Move window to workspace 2"
msgstr "Pindahkan jendela ke ruang kerja 2"
#: data/50-mutter-navigation.xml:15
msgid "Move window to workspace 3"
msgstr "Pindahkan jendela ke ruang kerja 3"
#: data/50-mutter-navigation.xml:18
msgid "Move window to workspace 4"
msgstr "Pindahkan jendela ke ruang kerja 4"
#: data/50-mutter-navigation.xml:21
msgid "Move window to last workspace"
msgstr "Pindahkan jendela ke ruang kerja terakhir"
#: data/50-mutter-navigation.xml:24
msgid "Move window one workspace to the left"
msgstr "Pindahkan jendela satu ruang kerja ke kiri"
#: data/50-mutter-navigation.xml:27
msgid "Move window one workspace to the right"
msgstr "Pindahkan jendela satu ruang kerja ke kanan"
#: data/50-mutter-navigation.xml:30
msgid "Move window one workspace up"
msgstr "Pindahkan jendela satu ruang kerja ke atas"
#: data/50-mutter-navigation.xml:33
msgid "Move window one workspace down"
msgstr "Pindahkan jendela satu ruang kerja ke bawah"
#: data/50-mutter-navigation.xml:36
msgid "Move window one monitor to the left"
msgstr "Pindahkan jendela satu monitor ke kiri"
#: data/50-mutter-navigation.xml:39
msgid "Move window one monitor to the right"
msgstr "Pindahkan jendela satu monitor ke kanan"
#: data/50-mutter-navigation.xml:42
msgid "Move window one monitor up"
msgstr "Pindahkan jendela satu monitor ke atas"
#: data/50-mutter-navigation.xml:45
msgid "Move window one monitor down"
msgstr "Pindahkan jendela satu monitor ke bawah"
#: data/50-mutter-navigation.xml:49
msgid "Switch applications"
msgstr "Bertukar aplikasi"
#: data/50-mutter-navigation.xml:54
msgid "Switch to previous application"
msgstr "Bertukar ke aplikasi sebelumnya"
#: data/50-mutter-navigation.xml:58
msgid "Switch windows"
msgstr "Bertukar jendela"
#: data/50-mutter-navigation.xml:63
msgid "Switch to previous window"
msgstr "Bertukar ke jendela sebelumnya"
#: data/50-mutter-navigation.xml:67
msgid "Switch windows of an application"
msgstr "Bertukar jendela dari suatu aplikasi"
#: data/50-mutter-navigation.xml:72
msgid "Switch to previous window of an application"
msgstr "Bertukar ke jendela aplikasi sebelumnya"
#: data/50-mutter-navigation.xml:76
msgid "Switch system controls"
msgstr "Bertukar kendali sistem"
#: data/50-mutter-navigation.xml:81
msgid "Switch to previous system control"
msgstr "Bertukar ke kendali sistem sebelumnya"
#: data/50-mutter-navigation.xml:85
msgid "Switch windows directly"
msgstr "Bertukar jendela secara langsung"
#: data/50-mutter-navigation.xml:90
msgid "Switch directly to previous window"
msgstr "Bertukar secara langsung ke jendela sebelumnya"
#: data/50-mutter-navigation.xml:94
msgid "Switch windows of an app directly"
msgstr "Bertukar jendela dari suatu app secara langsung"
#: data/50-mutter-navigation.xml:99
msgid "Switch directly to previous window of an app"
msgstr "Bertukar secara langsung ke jendela sebelumnya dari suatu app"
#: data/50-mutter-navigation.xml:103
msgid "Switch system controls directly"
msgstr "Bertukar kendali sistem secara langsung"
#: data/50-mutter-navigation.xml:108
msgid "Switch directly to previous system control"
msgstr "Bertukar secara langsung ke kendali sistem sebelumnya"
#: data/50-mutter-navigation.xml:111
msgid "Hide all normal windows"
msgstr "Sembunyikan semua jendela normal"
#: data/50-mutter-navigation.xml:114
msgid "Switch to workspace 1"
msgstr "Bertukar ke ruang kerja 1"
#: data/50-mutter-navigation.xml:117
msgid "Switch to workspace 2"
msgstr "Bertukar ke ruang kerja 2"
#: data/50-mutter-navigation.xml:120
msgid "Switch to workspace 3"
msgstr "Bertukar ke ruang kerja 3"
#: data/50-mutter-navigation.xml:123
msgid "Switch to workspace 4"
msgstr "Bertukar ke ruang kerja 4"
#: data/50-mutter-navigation.xml:126
msgid "Switch to last workspace"
msgstr "Bertukar ke ruang kerja terakhir"
#: data/50-mutter-navigation.xml:129
msgid "Move to workspace left"
msgstr "Pindahkan ke ruang kerja kiri"
#: data/50-mutter-navigation.xml:132
msgid "Move to workspace right"
msgstr "Pindahkan ke ruang kerja kanan"
#: data/50-mutter-navigation.xml:135
msgid "Move to workspace above"
msgstr "Pindahkan ke ruang kerja di atas"
#: data/50-mutter-navigation.xml:138
msgid "Move to workspace below"
msgstr "Pindahkan ke ruang kerja di bawah"
#: data/50-mutter-system.xml:6
msgid "System"
msgstr "Sistem"
#: data/50-mutter-system.xml:8
msgid "Show the run command prompt"
msgstr "Tampilkan sapaan jalankan perintah"
#: data/50-mutter-system.xml:10
msgid "Show the activities overview"
msgstr "Tampilkan ringkasan aktivitas"
#: data/50-mutter-windows.xml:6
msgid "Windows"
msgstr "Jendela"
#: data/50-mutter-windows.xml:8
msgid "Activate the window menu"
msgstr "Mengaktifkan menu jendela"
#: data/50-mutter-windows.xml:10
msgid "Toggle fullscreen mode"
msgstr "Jungkitkan mode layar penuh"
#: data/50-mutter-windows.xml:12
msgid "Toggle maximization state"
msgstr "Jungkitkan keadaan termaksimalkan"
#: data/50-mutter-windows.xml:14
msgid "Maximize window"
msgstr "Maksimalkan jendela"
#: data/50-mutter-windows.xml:16
msgid "Restore window"
msgstr "Pulihkan jendela"
#: data/50-mutter-windows.xml:18
msgid "Toggle shaded state"
msgstr "Jungkitkan keadaan berbayang"
#: data/50-mutter-windows.xml:20
msgid "Close window"
msgstr "Tutup jendela"
#: data/50-mutter-windows.xml:22
msgid "Hide window"
msgstr "Sembunyikan jendela"
#: data/50-mutter-windows.xml:24
msgid "Move window"
msgstr "Pindahkan jendela"
#: data/50-mutter-windows.xml:26
msgid "Resize window"
msgstr "Ubah ukuran jendela"
#: data/50-mutter-windows.xml:29
msgid "Toggle window on all workspaces or one"
msgstr "Jungkitkan jendela pada semua atau satu area kerja"
#: data/50-mutter-windows.xml:31
msgid "Raise window if covered, otherwise lower it"
msgstr "Naikkan jendela bila tertutup jendela lain, sebaliknya turunkan"
#: data/50-mutter-windows.xml:33
msgid "Raise window above other windows"
msgstr "Naikkan jendela di atas jendela-jendela lain"
#: data/50-mutter-windows.xml:35
msgid "Lower window below other windows"
msgstr "Turunkan jendela di bawah jendela-jendela lain"
#: data/50-mutter-windows.xml:37
msgid "Maximize window vertically"
msgstr "Maksimalkan ukuran jendela secara vertikal"
#: data/50-mutter-windows.xml:39
msgid "Maximize window horizontally"
msgstr "Maksimalkan ukuran jendela secara horisontal"
#: data/50-mutter-windows.xml:43
msgid "View split on left"
msgstr "Tilik belah di kiri"
#: data/50-mutter-windows.xml:47
msgid "View split on right"
msgstr "Tilik belah di kanan"
#: data/mutter.desktop.in:4
msgid "Mutter"
msgstr "Mutter"
#: data/org.gnome.mutter.gschema.xml.in:7
msgid "Modifier to use for extended window management operations"
msgstr "Tombol yang digunakan untuk memperluas operasi manajemen jendela"
#: data/org.gnome.mutter.gschema.xml.in:8
msgid ""
"This key will initiate the “overlay”, which is a combination window overview "
"and application launching system. The default is intended to be the “Windows "
"key” on PC hardware. Its expected that this binding either the default or "
"set to the empty string."
msgstr ""
"Kunci ini akan mengawali \"overlay\", yang merupakan kombinasi ringkasan "
"jendela dan sistem peluncuran aplikasi. Nilai baku ditujukan agar menjadi "
"\"tombol Windows\" pada perangkat keras PC. Diharapkan agar pengikatan ini "
"berupa baku atau diisi dengan kalimat kosong."
#: data/org.gnome.mutter.gschema.xml.in:20
msgid "Attach modal dialogs"
msgstr "Lampirkan dialog modal"
#: data/org.gnome.mutter.gschema.xml.in:21
msgid ""
"When true, instead of having independent titlebars, modal dialogs appear "
"attached to the titlebar of the parent window and are moved together with "
"the parent window."
msgstr ""
"Jika bernilai \"true\", maka dialog modal akan muncul menempel pada baris "
"judul jendela utama dan bergerak seiring perpindahan jendela utama tersebut."
#: data/org.gnome.mutter.gschema.xml.in:30
msgid "Enable edge tiling when dropping windows on screen edges"
msgstr "Fungsikan pengubinan tepi ketika menjatuhkan jendela ke tepi layar"
#: data/org.gnome.mutter.gschema.xml.in:31
msgid ""
"If enabled, dropping windows on vertical screen edges maximizes them "
"vertically and resizes them horizontally to cover half of the available "
"area. Dropping windows on the top screen edge maximizes them completely."
msgstr ""
"Bila difungsikan, menjatuhkan jendela pada tepi vertikal layar akan "
"memaksimalkan mereka pada arah vertikal dan mengubah ukuran horisontalnya "
"menutupi separuh dari area yang tersedia. Menjatuhkan jendela pada tepi atas "
"layar akan memaksimalkan mereka sepenuhnya."
#: data/org.gnome.mutter.gschema.xml.in:40
msgid "Workspaces are managed dynamically"
msgstr "Ruang kerja dikelola secara dinamis"
#: data/org.gnome.mutter.gschema.xml.in:41
msgid ""
"Determines whether workspaces are managed dynamically or whether theres a "
"static number of workspaces (determined by the num-workspaces key in org."
"gnome.desktop.wm.preferences)."
msgstr ""
"Menentukan apakah ruang kerja dikelola secara dinamis atau apakah ada "
"sejumlah tetap ruang kerja (ditentukan oleh kunci num-workspaces dalam org."
"gnome.desktop.wm.preferences)."
#: data/org.gnome.mutter.gschema.xml.in:50
msgid "Workspaces only on primary"
msgstr "Ruang kerja hanya pada primer"
#: data/org.gnome.mutter.gschema.xml.in:51
msgid ""
"Determines whether workspace switching should happen for windows on all "
"monitors or only for windows on the primary monitor."
msgstr ""
"Menentukan apakah perpindahan area kerja hanya terjadi pada jendela aplikasi "
"di semua monitor atau hanya untuk jendela pada monitor utama."
#: data/org.gnome.mutter.gschema.xml.in:59
msgid "No tab popup"
msgstr "Tak ada popup tab"
#: data/org.gnome.mutter.gschema.xml.in:60
msgid ""
"Determines whether the use of popup and highlight frame should be disabled "
"for window cycling."
msgstr ""
"Menentukan apakah penggunaan popup dan rangka penyorot mesti dimatikan bagi "
"perputaran jendela."
#: data/org.gnome.mutter.gschema.xml.in:68
msgid "Delay focus changes until the pointer stops moving"
msgstr "Tunda perubahan fokus sampai penunjuk berhenti bergerak"
#: data/org.gnome.mutter.gschema.xml.in:69
msgid ""
"If set to true, and the focus mode is either “sloppy” or “mouse” then the "
"focus will not be changed immediately when entering a window, but only after "
"the pointer stops moving."
msgstr ""
"Bila diisi dengan true, dan mode fokus adalah \"sloppy\" atau \"mouse\" maka "
"fokus tak akan berubah seketika saat memasuki suatu jendela, tapi hanya "
"setelah penunjuk berhenti bergerak."
#: data/org.gnome.mutter.gschema.xml.in:79
msgid "Draggable border width"
msgstr "Lebar batas yang dapat diseret"
#: data/org.gnome.mutter.gschema.xml.in:80
msgid ""
"The amount of total draggable borders. If the themes visible borders are "
"not enough, invisible borders will be added to meet this value."
msgstr ""
"Total banyaknya tepi yang dapat diseret. Bila tepi tema yang nampak tak "
"cukup, tepi tak nampak akan ditambahkan untuk memenuhi nilai ini."
#: data/org.gnome.mutter.gschema.xml.in:89
msgid "Auto maximize nearly monitor sized windows"
msgstr "Memaksimalkan otomatis hampir memantau jendela yang ditata ukurannya"
#: data/org.gnome.mutter.gschema.xml.in:90
msgid ""
"If enabled, new windows that are initially the size of the monitor "
"automatically get maximized."
msgstr ""
"Bila difungsikan, jendela baru yang awalnya seukuran monitor secara otomatis "
"dimaksimalkan."
#: data/org.gnome.mutter.gschema.xml.in:98
msgid "Place new windows in the center"
msgstr "Tempatkan jendela baru di tengah"
#: data/org.gnome.mutter.gschema.xml.in:99
msgid ""
"When true, the new windows will always be put in the center of the active "
"screen of the monitor."
msgstr ""
"Ketika berisi true, jendela baru akan selalu diletakkan di tengah dari layar "
"aktif dari monitor."
#: data/org.gnome.mutter.gschema.xml.in:107
msgid "Enable experimental features"
msgstr "Aktifkan fitur eksperimental"
#: data/org.gnome.mutter.gschema.xml.in:108
msgid ""
"To enable experimental features, add the feature keyword to the list. "
"Whether the feature requires restarting the compositor depends on the given "
"feature. Any experimental feature is not required to still be available, or "
"configurable. Dont expect adding anything in this setting to be future "
"proof. Currently possible keywords: • “monitor-config-manager” — use the new "
"monitor configuration system, aimed to replace the old one. This enables a "
"higher level configuration API to be used by configuration applications, as "
"well as the ability to configure per logical monitor scale. • “scale-monitor-"
"framebuffer” — makes mutter default to layout logical monitors in a logical "
"pixel coordinate space, while scaling monitor framebuffers instead of window "
"content, to manage HiDPI monitors. Does not require a restart. Also enabling "
"“monitor-config-manager” is required for this feature to be enabled."
msgstr ""
"Untuk mengaktifkan fitur eksperimental, tambahkan kata kunci fitur ke dalam "
"daftar. Apakah fitur memerlukan nyala ulang kompositor tergantung pada fitur "
"yang diberikan. Setiap fitur eksperimental tidak diharuskan tetap tersedia, "
"atau dapat dikonfigurasi. Jangan berharap menambahkan apapun dalam "
"pengaturan ini kebal perubahan di masa depan. Saat ini kata kunci yang "
"mungkin: • \"monitor-config-manager\" — gunakan sistem konfigurasi monitor "
"baru, yang ditujukan untuk mengganti yang lama. Hal ini memungkinkan tingkat "
"konfigurasi API yang lebih tinggi untuk digunakan oleh aplikasi konfigurasi, "
"serta kemampuan untuk mengkonfigurasi per skala monitor logikal. • “scale-"
"monitor-framebuffer” — membuat bawaan mutter untuk tata letak monitor "
"logikal dalam ruang koordinat pixel logikal, sambil menskalakan framebuffer "
"monitor alih-alih konten jendela, untuk mengelola monitor HiDPI. Tidak perlu "
"mulai ulang. Juga mengaktifkan “monitor-config-manager” diperlukan agar "
"fitur ini diaktifkan."
#: data/org.gnome.mutter.gschema.xml.in:151
msgid "Select window from tab popup"
msgstr "Pilih jendela dari popup tab"
#: data/org.gnome.mutter.gschema.xml.in:156
msgid "Cancel tab popup"
msgstr "Batalkan popup tab"
#: data/org.gnome.mutter.gschema.xml.in:161
msgid "Switch monitor configurations"
msgstr "Tukar konfigurasi monitor bawaan"
#: data/org.gnome.mutter.gschema.xml.in:166
msgid "Rotates the built-in monitor configuration"
msgstr "Memutar konfigurasi monitor bawaan"
#: data/org.gnome.mutter.wayland.gschema.xml.in:6
msgid "Switch to VT 1"
msgstr "Bertukar ke VT 1"
#: data/org.gnome.mutter.wayland.gschema.xml.in:10
msgid "Switch to VT 2"
msgstr "Bertukar ke VT 2"
#: data/org.gnome.mutter.wayland.gschema.xml.in:14
msgid "Switch to VT 3"
msgstr "Bertukar ke VT 3"
#: data/org.gnome.mutter.wayland.gschema.xml.in:18
msgid "Switch to VT 4"
msgstr "Bertukar ke VT 4"
#: data/org.gnome.mutter.wayland.gschema.xml.in:22
msgid "Switch to VT 5"
msgstr "Bertukar ke VT 5"
#: data/org.gnome.mutter.wayland.gschema.xml.in:26
msgid "Switch to VT 6"
msgstr "Bertukar ke VT 6"
#: data/org.gnome.mutter.wayland.gschema.xml.in:30
msgid "Switch to VT 7"
msgstr "Bertukar ke VT 7"
#: data/org.gnome.mutter.wayland.gschema.xml.in:34
msgid "Switch to VT 8"
msgstr "Bertukar ke VT 8"
#: data/org.gnome.mutter.wayland.gschema.xml.in:38
msgid "Switch to VT 9"
msgstr "Bertukar ke VT 9"
#: data/org.gnome.mutter.wayland.gschema.xml.in:42
msgid "Switch to VT 10"
msgstr "Bertukar ke VT 10"
#: data/org.gnome.mutter.wayland.gschema.xml.in:46
msgid "Switch to VT 11"
msgstr "Bertukar ke VT 11"
#: data/org.gnome.mutter.wayland.gschema.xml.in:50
msgid "Switch to VT 12"
msgstr "Bertukar ke VT 12"
#. TRANSLATORS: This string refers to a button that switches between
#. * different modes.
#.
#: src/backends/meta-input-settings.c:2118
#, c-format
msgid "Mode Switch (Group %d)"
msgstr "Tukar Mode: (Grup %d)"
#. TRANSLATORS: This string refers to an action, cycles drawing tablets'
#. * mapping through the available outputs.
#.
#: src/backends/meta-input-settings.c:2141
msgid "Switch monitor"
msgstr "Berpindah monitor"
#: src/backends/meta-input-settings.c:2143
msgid "Show on-screen help"
msgstr "Tampilkan bantuan pada layar"
#: src/backends/meta-monitor-manager.c:925
msgid "Built-in display"
msgstr "Tampilan bawaan"
#: src/backends/meta-monitor-manager.c:948
msgid "Unknown"
msgstr "Tak Dikenal"
#: src/backends/meta-monitor-manager.c:950
msgid "Unknown Display"
msgstr "Tampilan Tak Dikenal"
#. TRANSLATORS: this is a monitor vendor name, followed by a
#. * size in inches, like 'Dell 15"'
#.
#: src/backends/meta-monitor-manager.c:958
#, c-format
msgid "%s %s"
msgstr "%s %s"
#. This probably means that a non-WM compositor like xcompmgr is running;
#. * we have no way to get it to exit
#: src/compositor/compositor.c:476
#, c-format
msgid ""
"Another compositing manager is already running on screen %i on display “%s”."
msgstr ""
"Manajer komposit lain telah berjalan pada layar %i pada tampilan \"%s\"."
#: src/core/bell.c:194
msgid "Bell event"
msgstr "Bel peristiwa"
#: src/core/display.c:608
#, c-format
msgid "Failed to open X Window System display “%s”\n"
msgstr "Gagal membuka tampilan X Window System \"%s\"\n"
#: src/core/main.c:189
msgid "Disable connection to session manager"
msgstr "Menonaktifkan koneksi ke manajer sesi"
#: src/core/main.c:195
msgid "Replace the running window manager"
msgstr "Mengganti manajer jendela yang tengah berjalan"
#: src/core/main.c:201
msgid "Specify session management ID"
msgstr "Tentukan kode pengaturan sesi"
#: src/core/main.c:206
msgid "X Display to use"
msgstr "Tampilan X yang digunakna"
#: src/core/main.c:212
msgid "Initialize session from savefile"
msgstr "Aktifkan sesi dari berkas simpanan"
#: src/core/main.c:218
msgid "Make X calls synchronous"
msgstr "Buat panggilan X selaras"
#: src/core/main.c:225
msgid "Run as a wayland compositor"
msgstr "Jalankan sebagai kompositor wayland"
#: src/core/main.c:231
msgid "Run as a nested compositor"
msgstr "Jalankan sebagai kompositor bersarang"
#: src/core/main.c:239
msgid "Run as a full display server, rather than nested"
msgstr "Jalankan sebagai server tampilan penuh, ketimbang tampilan bersarang"
#. Translators: %s is a window title
#: src/core/meta-close-dialog-default.c:147
#, c-format
msgid "“%s” is not responding."
msgstr "\"%s\" tak merespon."
#: src/core/meta-close-dialog-default.c:149
msgid "Application is not responding."
msgstr "Aplikasi tak merespon."
#: src/core/meta-close-dialog-default.c:154
msgid ""
"You may choose to wait a short while for it to continue or force the "
"application to quit entirely."
msgstr ""
"Anda bisa memilih untuk menunggu sebentar atau memaksa aplikasi keluar."
#: src/core/meta-close-dialog-default.c:161
msgid "_Force Quit"
msgstr "_Matikan Paksa"
#: src/core/meta-close-dialog-default.c:161
msgid "_Wait"
msgstr "_Tunggu"
#: src/core/mutter.c:39
#, c-format
msgid ""
"mutter %s\n"
"Copyright © 2001-%d Havoc Pennington, Red Hat, Inc., and others\n"
"This is free software; see the source for copying conditions.\n"
"There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A "
"PARTICULAR PURPOSE.\n"
msgstr ""
"mutter %s\n"
"Hak Cipta (C) 2001-%d Havoc Pennington, Red Hat, Inc., dan lain-lain.\n"
"Ini adalah perangkat lunak bebas; lihat kode asalnya untuk kondisi "
"penyalinan.\n"
"TIDAK ADA jaminan, bahkan untuk KELAYAKAN JUAL atau KELAYAKAN UNTUK KEGUNAAN "
"TERTENTU.\n"
#: src/core/mutter.c:53
msgid "Print version"
msgstr "Cetak versi"
#: src/core/mutter.c:59
msgid "Mutter plugin to use"
msgstr "Pengaya Mutter yang dipakai"
#: src/core/prefs.c:1997
#, c-format
msgid "Workspace %d"
msgstr "Area kerja %d"
#: src/core/screen.c:580
#, c-format
msgid ""
"Display “%s” already has a window manager; try using the --replace option to "
"replace the current window manager."
msgstr ""
"Tampilan \"%s\" sudah memiliki manajer jendela; cobalah gunakan pilihan --"
"replace untuk mengganti manajer jendela saat ini."
#: src/core/screen.c:665
#, c-format
msgid "Screen %d on display “%s” is invalid\n"
msgstr "Layar %d pada tampilan \"%s\" tidak valid\n"
#: src/core/util.c:120
msgid "Mutter was compiled without support for verbose mode\n"
msgstr "Muter dikompilasi tanpa dukungan mode riuh\n"
#: src/wayland/meta-wayland-tablet-pad.c:563
#, c-format
msgid "Mode Switch: Mode %d"
msgstr "Tukar Mode: Mode %d"
#: src/x11/session.c:1815
msgid ""
"These windows do not support “save current setup” and will have to be "
"restarted manually next time you log in."
msgstr ""
"Jendela ini tidak mendukung \"menyimpan setelan aktif saat ini\" dan mesti "
"dijalankan ulang secara manual kala berikut Anda log masuk."
#: src/x11/window-props.c:559
#, c-format
msgid "%s (on %s)"
msgstr "%s (pada %s)"