Commit Graph

31 Commits

Author SHA1 Message Date
Robert Bragg
a0441778ad This re-licenses Cogl 1.18 under the MIT license
Since the Cogl 1.18 branch is actively maintained in parallel with the
master branch; this is a counter part to commit 1b83ef938fc16b which
re-licensed the master branch to use the MIT license.

This re-licensing is a follow up to the proposal that was sent to the
Cogl mailing list:
http://lists.freedesktop.org/archives/cogl/2013-December/001465.html

Note: there was a copyright assignment policy in place for Clutter (and
therefore Cogl which was part of Clutter at the time) until the 11th of
June 2010 and so we only checked the details after that point (commit
0bbf50f905)

For each file, authors were identified via this Git command:
$ git blame -p -C -C -C20 -M -M10  0bbf50f905..HEAD

We received blanket approvals for re-licensing all Red Hat and Collabora
contributions which reduced how many people needed to be contacted
individually:
- http://lists.freedesktop.org/archives/cogl/2013-December/001470.html
- http://lists.freedesktop.org/archives/cogl/2014-January/001536.html

Individual approval requests were sent to all the other identified authors
who all confirmed the re-license on the Cogl mailinglist:
http://lists.freedesktop.org/archives/cogl/2014-January

As well as updating the copyright header in all sources files, the
COPYING file has been updated to reflect the license change and also
document the other licenses used in Cogl such as the SGI Free Software
License B, version 2.0 and the 3-clause BSD license.

This patch was not simply cherry-picked from master; but the same
methodology was used to check the source files.
2014-02-22 02:02:53 +00:00
Neil Roberts
534e535a28 Use the Wayland embedded linked list implementation instead of BSD's
This removes cogl-queue.h and adds a copy of Wayland's embedded list
implementation. The advantage of the Wayland model is that it is much
simpler and so it is easier to follow. It also doesn't require
defining a typedef for every list type.

The downside is that there is only one list type which is a
doubly-linked list where the head has a pointer to both the beginning
and the end. The BSD implementation has many more combinations some of
which we were taking advantage of to reduce the size of critical
structs where we didn't need a pointer to the end of the list.

The corresponding changes to uses of cogl-queue.h are:

• COGL_STAILQ_* was used for onscreen the list of events and dirty
  notifications. This makes the size of the CoglContext grow by one
  pointer.

• COGL_TAILQ_* was used for fences.

• COGL_LIST_* for CoglClosures. In this case the list head now has an
  extra pointer which means CoglOnscreen will grow by the size of
  three pointers, but this doesn't seem like a particularly important
  struct to optimise for size anyway.

• COGL_LIST_* was used for the list of foreign GLES2 offscreens.

• COGL_TAILQ_* was used for the list of sub stacks in a
  CoglMemoryStack.

• COGL_LIST_* was used to track the list of layers that haven't had
  code generated yet while generating a fragment shader for a
  pipeline.

• COGL_LIST_* was used to track the pipeline hierarchy in CoglNode.

The last part is a bit more controversial because it increases the
size of CoglPipeline and CoglPipelineLayer by one pointer in order to
have the redundant tail pointer for the list head. Normally we try to
be very careful about the size of the CoglPipeline struct. Because
CoglPipeline is slice-allocated, this effectively ends up adding two
pointers to the size because GSlice rounds up to the size of two
pointers.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 13abf613b15f571ba1fcf6d2eb831ffc6fa31324)

Conflicts:
	cogl/cogl-context-private.h
	cogl/cogl-context.c
	cogl/driver/gl/cogl-pipeline-fragend-glsl.c
	doc/reference/cogl-2.0-experimental/Makefile.am
2013-06-13 13:45:47 +01:00
Daniel Stone
ea7d3b8476 Add fence API
cogl_framebuffer_add_fence creates a synchronisation fence, which will
invoke a user-specified callback when the GPU has finished executing all
commands provided to it up to that point in time.

Support is currently provided for GL 3.x's GL_ARB_sync extension, and
EGL's EGL_KHR_fence_sync (when used with OpenGL ES).

Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=691752

(cherry picked from commit e6d37470da9294adc1554c0a8c91aa2af560ed9f)
2013-05-28 21:36:03 +01:00
Neil Roberts
3a041ef41b Reorder some struct members to avoid padding due to alignment
This tweaks the ordering of some struct members in some of the more
important structs so that the compiler won't insert wasted padding to
avoid breaking the alignment. Some members that were previously
unsigned long have been changed to unsigned int. These members need to
be able to fit in 32-bits to run on 32-bit machines anyway so there's
no point in having them extend to 64-bit on 64-bit machines. This
doesn't affect the public API.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit b721af236680005464e39f7f4dd11381d95efb16)
2013-01-22 17:48:19 +00:00
Robert Bragg
e3d6bc36d3 Re-design the matrix stack using a graph of ops
This re-designs the matrix stack so we now keep track of each separate
operation such as rotating, scaling, translating and multiplying as
immutable, ref-counted nodes in a graph.

Being a "graph" here means that different transformations composed of
a sequence of linked operation nodes may share nodes.

The first node in a matrix-stack is always a LOAD_IDENTITY operation.

As an example consider if an application where to draw three rectangles
A, B and C something like this:

cogl_framebuffer_scale (fb, 2, 2, 2);
cogl_framebuffer_push_matrix(fb);

  cogl_framebuffer_translate (fb, 10, 0, 0);

  cogl_framebuffer_push_matrix(fb);

    cogl_framebuffer_rotate (fb, 45, 0, 0, 1);
    cogl_framebuffer_draw_rectangle (...); /* A */

  cogl_framebuffer_pop_matrix(fb);

  cogl_framebuffer_draw_rectangle (...); /* B */

cogl_framebuffer_pop_matrix(fb);

cogl_framebuffer_push_matrix(fb);
  cogl_framebuffer_set_modelview_matrix (fb, &mv);
  cogl_framebuffer_draw_rectangle (...); /* C */
cogl_framebuffer_pop_matrix(fb);

That would result in a graph of nodes like this:

LOAD_IDENTITY
      |
    SCALE
    /     \
SAVE       LOAD
  |           |
TRANSLATE    RECTANGLE(C)
  |     \
SAVE    RECTANGLE(B)
  |
ROTATE
  |
RECTANGLE(A)

Each push adds a SAVE operation which serves as a marker to rewind too
when a corresponding pop is issued and also each SAVE node may also
store a cached matrix representing the composition of all its ancestor
nodes. This means if we repeatedly need to resolve a real CoglMatrix
for a given node then we don't need to repeat the composition.

Some advantages of this design are:
- A single pointer to any node in the graph can now represent a
  complete, immutable transformation that can be logged for example
  into a journal. Previously we were storing a full CoglMatrix in
  each journal entry which is 16 floats for the matrix itself as well
  as space for flags and another 16 floats for possibly storing a
  cache of the inverse. This means that we significantly reduce
  the size of the journal when drawing lots of primitives and we also
  avoid copying over 128 bytes per entry.
- It becomes much cheaper to check for equality. In cases where some
  (unlikely) false negatives are allowed simply comparing the pointers
  of two matrix stack graph entries is enough. Previously we would use
  memcmp() to compare matrices.
- It becomes easier to do comparisons of transformations. By looking
  for the common ancestry between nodes we can determine the operations
  that differentiate the transforms and use those to gain a high level
  understanding of the differences. For example we use this in the
  journal to be able to efficiently determine when two rectangle
  transforms only differ by some translation so that we can perform
  software clipping.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-08-06 14:27:40 +01:00
Robert Bragg
54735dec84 Switch use of primitive glib types to c99 equivalents
The coding style has for a long time said to avoid using redundant glib
data types such as gint or gchar etc because we feel that they make the
code look unnecessarily foreign to developers coming from outside of the
Gnome developer community.

Note: When we tried to find the historical rationale for the types we
just found that they were apparently only added for consistent syntax
highlighting which didn't seem that compelling.

Up until now we have been continuing to use some of the platform
specific type such as gint{8,16,32,64} and gsize but this patch switches
us over to using the standard c99 equivalents instead so we can further
ensure that our code looks familiar to the widest range of C developers
who might potentially contribute to Cogl.

So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this
switches all Cogl code to instead use the int{8,16,32,64}_t and
uint{8,16,32,64}_t c99 types instead.

Instead of gsize we now use size_t

For now we are not going to use the c99 _Bool type and instead we have
introduced a new CoglBool type to use instead of gboolean.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-08-06 14:27:39 +01:00
Robert Bragg
09642a83b5 Removes all remaining use of CoglHandle
Removing CoglHandle has been an on going goal for quite a long time now
and finally this patch removes the last remaining uses of the CoglHandle
type and the cogl_handle_ apis.

Since the big remaining users of CoglHandle were the cogl_program_ and
cogl_shader_ apis which have replaced with the CoglSnippets api this
patch removes both of these apis.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0)

  Since the original patch was done after removing deprecated API
  this back ported patch doesn't affect deprecated API and so
  actually this cherry-pick doesn't remove all remaining use of
  CoglHandle as it did for the master branch of Cogl.
2012-08-06 14:27:39 +01:00
Neil Roberts
ff48f3b174 journal: Always keep a pointer back to the framebuffer
Previously when adding a quad to the journal it would assume the
journal belongs to the framebuffer at the top of the framebuffer stack
and store a reference to that. We eventually want to get rid of the
framebuffer stack so we should avoid using it here. The journal now
takes a pointer back to the framebuffer in its constructor and it
always retains the pointer. As was done previously, the journal still
does not take a reference on the framebuffer unless it is non-empty so
it does not create a permanent circular reference.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-03-16 17:26:30 +00:00
Neil Roberts
185630085c Add -Wmissing-declarations to maintainer flags and fix problems
This option to GCC makes it give a warning whenever a global function
is defined without a declaration. This should catch cases were we've
defined a function but forgot to put it in a header. In that case it
is either only used within one file so we should make it static or we
should declare it in a header.

The following changes where made to fix problems:

• Some functions were made static

• cogl-path.h (the one containing the 1.0 API) was split into two
  files, one defining the functions and one defining the enums so that
  cogl-path.c can include the enum and function declarations from the
  2.0 API as well as the function declarations from the 1.0 API.

• cogl2-clip-state has been removed. This only had one experimental
  function called cogl_clip_push_from_path but as this is unstable we
  might as well remove it favour of the equivalent cogl_framebuffer_*
  API.

• The GLX, SDL and WGL winsys's now have a private header to define
  their get_vtable function instead of directly declaring in the C
  file where it is called.

• All places that were calling COGL_OBJECT_DEFINE need to have the
  cogl_is_whatever function declared so these have been added either
  as a public function or in a private header.

• Some files that were not including the header containing their
  function declarations have been fixed to do so.

• Any unused error quark functions have been removed. If we later want
  them we should add them back one by one and add a declaration for
  them in a header.

• _cogl_is_framebuffer has been renamed to cogl_is_framebuffer and
  made a public function with a declaration in cogl-framebuffer.h

• Similarly for CoglOnscreen.

• cogl_vdraw_indexed_attributes is called
  cogl_framebuffer_vdraw_indexed_attributes in the header. The
  definition has been changed to match the header.

• cogl_index_buffer_allocate has been removed. This had no declaration
  and I'm not sure what it's supposed to do.

• CoglJournal has been changed to use the internal CoglObject macro so
  that it won't define an exported cogl_is_journal symbol.

• The _cogl_blah_pointer_from_handle functions have been removed.
  CoglHandle isn't used much anymore anyway and in the few places
  where it is used I think it's safe to just use the implicit cast
  from void* to the right type.

• The test-utils.h header for the conformance tests explicitly
  disables the -Wmissing-declaration option using a pragma because all
  of the tests declare their main function without a header. Any
  mistakes relating to missing declarations aren't really important
  for the tests.

• cogl_quaternion_init_from_quaternion and init_from_matrix have been
  given declarations in cogl-quaternion.h

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-03-06 18:45:44 +00:00
Neil Roberts
3700cc26a5 Change API so that CoglPixelBuffer no longer knows its w/h/format
The idea is that CoglPixelBuffer should just be a buffer that can be
used for pixel data and it has no idea about the details of any images
that are stored in it. This is analogous to CoglAttributeBuffer which
itself does not have any information about the attributes. When you
want to use a pixel buffer you should create a CoglBitmap which points
to a region of the attribute buffer and provides the extra needed
information such as the width, height and format. That way it is also
possible to use a single CoglPixelBuffer with multiple bitmaps.

The changes that are made are:

• cogl_pixel_buffer_new_with_size has been removed and in its place is
  cogl_bitmap_new_with_size. This will create a pixel buffer at the
  right size and rowstride for the given width/height/format and
  immediately create a single CoglBitmap to point into it. The old
  function had an out-parameter for the stride of the image but with
  the new API this should be queriable from the bitmap (although there
  is no function for this yet).

• There is now a public cogl_pixel_buffer_new constructor. This takes
  a size in bytes and data pointer similarly to
  cogl_attribute_buffer_new.

• cogl_texture_new_from_buffer has been removed. If you want to create
  a texture from a pixel buffer you should wrap it up in a bitmap
  first. There is already API to create a texture from a bitmap.

This patch also does a bit of header juggling because cogl-context.h
was including cogl-texture.h and cogl-framebuffer.h which were causing
some circular dependencies when cogl-bitmap.h includes cogl-context.h.
These weren't actually needed in cogl-context.h itself but a few other
headers were relying on them being included so this adds the #includes
where necessary.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-03-05 18:47:45 +00:00
Neil Roberts
10a38bb14f Add a public cogl_framebuffer_read_pixels_into_bitmap
This adds a public function to read pixels from a framebuffer into a
CoglBitmap. This replaces the internal function
_cogl_read_pixels_with_rowstride because a CoglBitmap contains a
rowstride so it can be used for the same purpose. A CoglBitmap already
has public API to make one that points to a CoglPixelBuffer so this
function can be used to read pixels into a PBO. It also avoids the
need to push the framebuffer on to the context's stack so it provides
a function which can be used in the 2.0 API after the stack is
removed.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-03-05 18:16:10 +00:00
Robert Bragg
680f63a48c Remove all internal includes of cogl.h
The cogl.h header is meant to be the public header for including the 1.x
api used by Clutter so we should stop using that as a convenient way to
include all likely prototypes and typedefs. Actually we already do a
good job of listing the specific headers we depend on in each of the .c
files we have so mostly this patch just strip out the redundant
includes for cogl.h with a few fixups where that broke the build.

Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-20 23:12:45 +00:00
Neil Roberts
d42f1873fc framebuffer: Flush the journal on destruction
Instead of flushing the journal whenever the current framebuffer on a
context is changed it is now flushed whenever the framebuffer is about
to be destroyed instead. To do this it implements a custom unref
function which detects when there is going to be exactly one reference
on the framebuffer and then flushes its journal. The journal now
always has a reference on the framebuffer whenever it is non-empty.
That means the unref will only cause a flush if the only thing keeping
the framebuffer alive is the entries in the journal.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-01-27 17:23:03 +00:00
Robert Bragg
4c3dadd35e Add a strong CoglTexture type to replace CoglHandle
As part of the on going, incremental effort to purge the non type safe
CoglHandle type from the Cogl API this patch tackles most of the
CoglHandle uses relating to textures.

We'd postponed making this change for quite a while because we wanted to
have a clearer understanding of how we wanted to evolve the texture APIs
towards Cogl 2.0 before exposing type safety here which would be
difficult to change later since it would imply breaking APIs.

The basic idea that we are steering towards now is that CoglTexture
can be considered to be the most primitive interface we have for any
object representing a texture. The texture interface would provide
roughly these methods:

  cogl_texture_get_width
  cogl_texture_get_height
  cogl_texture_can_repeat
  cogl_texture_can_mipmap
  cogl_texture_generate_mipmap;
  cogl_texture_get_format
  cogl_texture_set_region
  cogl_texture_get_region

Besides the texture interface we will then start to expose types
corresponding to specific texture types: CoglTexture2D,
CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and
CoglTexturePixmapX11.

We will then also expose an interface for the high-level texture types
we have (such as CoglTexture2DSlice, CoglSubTexture and
CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an
additional interface that lets you iterate a virtual region of a meta
texture and get mappings of primitive textures to sub-regions of that
virtual region. Internally we already have this kind of abstraction for
dealing with sliced texture, sub-textures and atlas textures in a
consistent way, so this will just make that abstraction public. The aim
here is to clarify that there is a difference between primitive textures
(CoglTexture2D/3D) and some of the other high-level textures, and also
enable developers to implement primitives that can support meta textures
since they can only be used with the cogl_rectangle API currently.

The thing that's not so clean-cut with this are the texture constructors
we have currently; such as cogl_texture_new_from_file which no longer
make sense when CoglTexture is considered to be an interface.  These
will basically just become convenient factory functions and it's just a
bit unusual that they are within the cogl_texture namespace.  It's worth
noting here that all the texture type APIs will also have their own type
specific constructors so these functions will only be used for the
convenience of being able to create a texture without really wanting to
know the details of what type of texture you need.  Longer term for 2.0
we may come up with replacement names for these factory functions or the
other thing we are considering is designing some asynchronous factory
functions instead since it's so often detrimental to application
performance to be blocked waiting for a texture to be uploaded to the
GPU.

Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-09-21 15:27:03 +01:00
Neil Roberts
efadc439a4 cogl-journal: Use a pool of vertex arrays
Previously whenever the journal is flushed a new vertex array would be
created to contain the vertices. To avoid the overhead of reallocating
a buffer every time, this patch makes it use a pool of 8 buffers which
are cycled in turn. The buffers are never destroyed but instead the
data is replaced. The journal should only ever be using one buffer at
a time but we cache more than one buffer anyway in case the GL driver
is internally using the buffer in which case mapping the buffer may
cause it to create a new buffer anyway.
2011-06-01 14:41:59 +01:00
Robert Bragg
d40cdfa3e1 Moves all GLX code down from Clutter to Cogl
This migrates all the GLX window system code down from the Clutter
backend code into a Cogl winsys. Moving OpenGL window system binding
code down from Clutter into Cogl is the biggest blocker to having Cogl
become a standalone 3D graphics library, so this is an important step in
that direction.
2011-04-11 17:54:36 +01:00
Robert Bragg
a8d6c3f686 cogl: Implements a software only read-pixel fast-path
This adds a transparent optimization to cogl_read_pixels for when a
single pixel is being read back and it happens that all the geometry of
the current frame is still available in the framebuffer's associated
journal.

The intention is to indirectly optimize Clutter's render based picking
mechanism in such a way that the 99% of cases where scenes are comprised
of trivial quad primitives that can easily be intersected we can avoid
the latency of kicking a GPU render and blocking for the result when we
know we can calculate the result manually on the CPU probably faster
than we could even kick a render.

A nice property of this solution is that it maintains all the
flexibility of the render based picking provided by Clutter and it can
gracefully fall back to GPU rendering if actors are drawn using anything
more complex than a quad for their geometry.

It seems worth noting that there is a limitation to the extensibility of
this approach in that it can only optimize picking a against geometry
that passes through Cogl's journal which isn't something Clutter
directly controls.  For now though this really doesn't matter since
basically all apps should end up hitting this fast-path. The current
idea to address this longer term would be a pick2 vfunc for ClutterActor
that can support geometry and render based input regions of actors and
move this optimization up into Clutter instead.

Note: currently we don't have a primitive count threshold to consider
that there could be scenes with enough geometry for us to compensate for
the cost of kicking a render and determine a result more efficiently by
utilizing the GPU. We don't currently expect this to be common though.

Note: in the future it could still be interesting to revive something
like the wip/async-pbo-picking branch to provide an asynchronous
read-pixels based optimization for Clutter picking in cases where more
complex input regions that necessitate rendering are in use or if we do
add a threshold for rendering as mentioned above.
2011-01-21 16:18:11 +00:00
Robert Bragg
1a5a4df326 journal: Support per-framebuffer journals
Instead of having a single journal per context, we now have a
CoglJournal object for each CoglFramebuffer. This means we now don't
have to flush the journal when switching/pushing/popping between
different framebuffers so for example a Clutter scene that involves some
ClutterEffect actors that transiently redirect to an FBO can still be
batched.

This also allows us to track state in the journal that relates to the
current frame of its associated framebuffer which we'll need for our
optimization for using the CPU to handle reading a single pixel back
from a framebuffer when we know the whole scene is currently comprised
of simple rectangles in a journal.
2011-01-21 16:18:10 +00:00
Neil Roberts
1d88e6c8ac cogl-journal: Attempt to clip manually to avoid breaking up batches
Before flushing the journal there is now a separate iteration that
will try to determine if the matrix of the clip stack and the matrix
of the rectangle in each entry are on the same plane. If they are it
can completely avoid the clip stack and instead manually modify the
vertex and texture coordinates to implement the clip. The has the
advantage that it won't break up batching if a single clipped
rectangle is used in a scene.

The software clip is only used if there is no user program and no
texture matrices. There is a threshold to the size of the batch where
it is assumed that it is worth the cost to break up a batch and
program the GPU to do the clipping. Currently this is set to 8
although this figure is plucked out of thin air.

To check whether the two matrices are on the same plane it tries to
determine if one of the matrices is just a simple translation of the
other. In the process of this it also works out what the translation
would be. These values can be used to translate the clip rectangle
into the coordinate space of the rectangle to be logged. Then we can
do the clip directly in the rectangle's coordinate space.
2010-12-03 17:16:58 +00:00
Robert Bragg
649aaffbe9 journal: remove possability of fallback layers
When logging quads in the journal it used to be possible to specify a
mask of fallback layers (layers where a default white texture should be
used in-place of the corresponding texture in the current source
pipeline). Since we now handle fallbacks for cogl_rectangle* primitives
when validating the pipeline up-front before logging in the journal we
no longer need the ability for the journal to apply fallbacks too.
2010-11-23 12:50:29 +00:00
Robert Bragg
1a3f946cc6 cogl: remove WrapModeOverrides from FlushOptions
This removes the possibility to specify wrap mode overrides within a
CoglPipelineFlushOptions struct since the right way to handle these
overrides is by copying the user's material and making the changes to
that copy before flushing. All primitives code has already switched away
from using these wrap mode overrides so this patch just removes unused
code and types. It also remove the wrap_mode_overrides argument for
_cogl_journal_log_quad.
2010-11-23 12:50:28 +00:00
Neil Roberts
22c61c5315 cogl-pipeline: Use layer overrides as CoglHandles instead of GLuint
Since d5634e37 the sliced texture backend now works in terms of
CoglTexture2Ds so there's no need to have special casing for
overriding the texture of a pipeline layer with a GL handle. Instead
we can just use cogl_pipeline_set_layer_texture with the
CoglHandle. The special _cogl_pipeline_set_layer_gl_texture_slice
function has now been removed and parts of the code for comparing
materials have been simplified.
2010-11-11 16:25:13 +00:00
Neil Roberts
3c8c195115 cogl-journal: Log the clip state in the journal
When adding a new entry to the journal a reference is now taken on the
current clip stack. Modifying the current clip state no longer causes
a journal flush. The journal flushing code now has an extra stage to
compare the clip state of each entry. The comparison can simply be
done by comparing the pointers. Although different clip states will
still end up with multiple draw calls this at leasts allows a scene
comprising of multiple different clips to be upload with one vbo. It
also lays the groundwork to do certain tricks when drawing clipped
rectangles such as modifying the geometry instead of setting a clip
state.
2010-11-04 18:10:09 +00:00
Robert Bragg
f80cb197a9 cogl: rename CoglMaterial -> CoglPipeline
This applies an API naming change that's been deliberated over for a
while now which is to rename CoglMaterial to CoglPipeline.

For now the new pipeline API is marked as experimental and public
headers continue to talk about materials not pipelines. The CoglMaterial
API is now maintained in terms of the cogl_pipeline API internally.
Currently this API is targeting Cogl 2.0 so we will have time to
integrate it properly with other upcoming Cogl 2.0 work.

The basic reasons for the rename are:
- That the term "material" implies to many people that they are
  constrained to fragment processing; perhaps as some kind of high-level
  texture abstraction.
    - In Clutter they get exposed by ClutterTexture actors which may be
      re-inforcing this misconception.
- When comparing how other frameworks use the term material, a material
  sometimes describes a multi-pass fragment processing technique which
  isn't the case in Cogl.
- In code, "CoglPipeline" will hopefully be a much more self documenting
  summary of what these objects represent; a full GPU pipeline
  configuration including, for example, vertex processing, fragment
  processing and blending.
- When considering the API documentation story, at some point we need a
  document introducing developers to how the "GPU pipeline" works so it
  should become intuitive that CoglPipeline maps back to that
  description of the GPU pipeline.
- This is consistent in terminology and concept to OpenGL 4's new
  pipeline object which is a container for program objects.

Note: The cogl-material.[ch] files have been renamed to
cogl-material-compat.[ch] because otherwise git doesn't seem to treat
the change as a moving the old cogl-material.c->cogl-pipeline.c and so
we loose all our git-blame history.
2010-11-03 18:09:23 +00:00
Robert Bragg
3979de6982 cogl: remove _cogl_material_flush_gl_state flush options
Since cogl_material_copy should now be cheap to use we can simplify
how we handle fallbacks and wrap mode overrides etc by simply copying
the original material and making our override changes on the new
material. This avoids the need for a sideband state structure that has
been growing in size and makes flushing material state more complex.

Note the plan is to eventually use weak materials for these override
materials and attach these as private data to the original materials so
we aren't making so many one-shot materials.
2010-06-15 15:26:27 +01:00
Neil Roberts
e007bc5358 cogl-material: Add support for setting the wrap mode for a layer
Previously, Cogl's texture coordinate system was effectively always
GL_REPEAT so that if an application specifies coordinates outside the
range 0→1 it would get repeated copies of the texture. It would
however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates
are in the range 0→1 so that in the common case that the whole texture
is being drawn with linear filtering it will not blend in edge pixels
from the opposite sides.

This patch adds the option for applications to change the wrap mode
per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge'
and 'automatic'. The automatic map mode is the default and it
implements the previous behaviour. The wrap mode can be changed for
the s and t coordinates independently. I've tried to make the
internals support setting the r coordinate but as we don't support 3D
textures yet I haven't exposed any public API for it.

The texture backends still have a set_wrap_mode virtual but this value
is intended to be transitory and it will be changed whenever the
material is flushed (although the backends are expected to cache it so
that it won't use too many GL calls). In my understanding this value
was always meant to be transitory and all primitives were meant to set
the value before drawing. However there were comments suggesting that
this is not the expected behaviour. In particular the vertex buffer
drawing code never set a wrap mode so it would end up with whatever
the texture was previously used for. These issues are now fixed
because the material will always set the wrap modes.

There is code to manually implement clamp-to-edge for textures that
can't be hardware repeated. However this doesn't fully work because it
relies on being able to draw the stretched parts using quads with the
same values for tx1 and tx2. The texture iteration code doesn't
support this so it breaks. This is a separate bug and it isn't
trivially solved.

When flushing a material there are now extra options to set wrap mode
overrides. The overrides are an array of values for each layer that
specifies an override for the s, t or r coordinates. The primitives
use this to implement the automatic wrap mode. cogl_polygon also uses
it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced
textures. Although this code has been added it looks like the sliced
trick has been broken for a while and I haven't attempted to fix it
here.

I've added a constant to represent the maximum number of layers that a
material supports so that I can size the overrides array. I've set it
to 32 because as far as I can tell we have that limit imposed anyway
because the other flush options use a guint32 to store a flag about
each layer. The overrides array ends up adding 32 bytes to each flush
options struct which may be a concern.

http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-12 15:44:23 +01:00
Emmanuele Bassi
72f4ddf532 Remove mentions of the FSF address
Since using addresses that might change is something that finally
the FSF acknowledge as a plausible scenario (after changing address
twice), the license blurb in the source files should use the URI
for getting the license in case the library did not come with it.

Not that URIs cannot possibly change, but at least it's easier to
set up a redirection at the same place.

As a side note: this commit closes the oldes bug in Clutter's bug
report tool.

http://bugzilla.openedhand.com/show_bug.cgi?id=521
2010-03-01 12:56:10 +00:00
Robert Bragg
142128e107 cogl_rectangle: avoid redundant copy of geometry
All the cogl_rectangle* APIs normalize their input into into an array of
_CoglMutiTexturedRect rectangles and pass these on to our work horse;
_cogl_rectangles_with_multitexture_coords. The definition of
_CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and
y_2 which meant for some common cases we were having to copy out from an
array into these members. We are now able to simply point into the users
array avoiding a copy which seems desirable when submiting lots of
rectangles.
2010-02-12 14:05:02 +00:00
Robert Bragg
ba4b00be42 cogl: remove redundant _cogl_journal_flush prototype
There was a redundant _cogl_journal_flush function prototype in
cogl-primitives.h
2010-02-12 14:05:01 +00:00
Neil Roberts
7c5aea9b68 cogl: Make the callback for foreach_sub_texture_in_region use const
The CoglTextureSliceCallback function pointer now takes const pointers
for the texture coordinates. This makes it clearer that the callback
should not modify the array and therefore the backend can use the same
array for both sets of coords.
2009-12-02 22:03:08 +00:00
Robert Bragg
861766f4ad [cogl-primitives] Split the journal out from cogl-primitives.c
The Journal can be considered a standalone component, so even though
it's currently only used to log quads, it seems better to split it
out into its own file.
2009-10-16 18:58:52 +01:00