border artifacts
* clutter/cogl/gl/cogl-texture.c: Set the wrap mode of a texture
on demand
Instead of setting the wrap mode once per texture at creation, it
is now changed whenever the texture is drawn. The previous value
is cached so that it isn't changed if the value is the same.
This is used in _cogl_texture_quad_hw to only enable GL_REPEAT
mode when the coordinates are not in the range [0,1]. Otherwise it
can pull in pixels from the other edge when the texture is
rendered off-pixel.
* tests/conform/test-mesh-interleved.c:
* tests/conform/test-mesh-contiguous.c: Remove the idle source
after the test is complete so that it won't interfere with other
tests.
Most cards don't actually support GL_QUADS and they are deprecated in
GL 3.0 so there is a chance it will perform faster with GL_TRIANGLES
even though it has to submit two extra vertices.
The glyphs are queued into an array of rectangles instead of being
drawn directly. Whenever a different texture is used or the sequence
is complete the array is flushed.
This is based on a patch from Owen Taylor.
This takes an array of sets of 8 floats to describe the rectangles. It
tries to send the geometry with a single glDrawArrays as far as
possible. cogl_texture_rectangle is now just a wrapper around
cogl_texture_multiple_rectangles.
cogl_texture_quad_hw and _sw now just add vertices to the vertex
array. The last texture used is stored and if a different texture is
encountered then flushes the vertices. cogl_texture_rectangle always
flushes the vertices after calling either of the functions.
the test for whether to use hardware tiling. Previously it assumed
that texture coordinates are in increasing order but this is not
the case since bug 1057 was fixed. The texture coordinates are now
sorted later. It also allowed negative coordinates which doesn't
make sense if the texture has waste.
timelines are more than 52 and continue to remove them
* clutter/clutter-score.c (traverse_children): Don't destroy the
entry in the handler for REMOVE_BY_ID. It will be removed again
anyway in the call to g_node_traverse. This was causing a
crash. Thanks to zhangwei for spotting.
* tests/tools/Makefile.am: Optionally build the
libdisable-npots.la library depending on whether libdl was
detected in the configure script. A helper script is also
generated to setup the LD_PRELOAD.
* tests/conform/Makefile.am: There are now two versions of the
test-report and full-report rules. test-report-normal is the same
as before and test-report-disable-npots runs the tests with the
disable-npots wrapper script. The full-report rule runs both of
them and displays two separate HTML files. The test-report rule
just runs the normal version as before.
* configure.ac: Add a test for libdl
* tests/tools/disable-npots.sh.in: New file. Template for the
helper script
* tests/tools/disable-npots.c: New file
`_glDrawRangeElements@24'
Resolve glDrawRangeElements with cogl_get_proc_address instead of
calling it directly because functions defined in GL > 1.1 are not
directly exported under Windows.
* clutter/cogl/common/cogl-mesh.c: Use the function pointer from
the context
* clutter/cogl/gl/cogl-context.c (cogl_create_context): Initialise
function pointer.
* clutter/cogl/gl/cogl-context.h (CoglContext): Add a function
pointer
* clutter/cogl/gl/cogl-defines.h.in: Add a typedef for the
function pointer.
* clutter/cogl/gl/cogl.c (_cogl_features_init): Resolve
glDrawRangeElements
fault in trunk and incorrect appearance in clutter-0.8
* clutter/clutter-score.c (start_children_entries): Check whether
the child timeline is actually attached at a marker before
comparing whether the marker's name matches the marker
reached. This fixes a crash that happens when a marker is reached
on a timeline that also has child timelines attached at the
end. Thanks to zhangwei for spotting.
* clutter/clutter-actor.c:
(clutter_actor_set_property): Add sanity checks for NULL
boxed values when setting the rotation center.
* tests/interactive/test-animation.c:
(on_button_press): Add an example on how to use the rotation
properties to animate an actor.
* tests/interactive/test-pixmap.c (create_pixmap): Use a format
string instead of passing the error message directly to g_error.
* tests/interactive/test-easing.c (test_easing_main)
(on_button_press):
* tests/interactive/test-animation.c (on_button_press): Use
unsigned variables for the results from clutter_actor_get_size
otherwise it complains about the pointer signedness being
different.
* clutter/clutter-script.c (clutter_script_add_search_paths): Use
G_GSIZE_FORMAT instead of %d for a gsize parameter otherwise it
gets upset on 64-bit.
differences and improve maintainability.
* clutter/cogl/gl/cogl-context.h:
Adds a CoglTextureGLVertex typedef + texture_vertices and
texture_vertices_size members to CoglContext for using vertex arrays
like GLES does
* clutter/cogl/gl/cogl-context.c:
Initializes texture_vertices + texture_vertices_size members
* clutter/cogl/gl/cogl-internal.h:
Adds COGL_ENABLE_COLOR_ARRAY
* clutter/cogl/gl/cogl.c:
Add COGL_ENABLE_COLOR_ARRAY support to cogl_enable
* clutter/cogl/gles/cogl-context.h:
Change the CoglTextureGLVertex to use GLfloat for the position
and texture coord attributes and GLubyte for the color.
* clutter/cogl/gles/cogl-texture-private.h:
Adds a wrap_mode member like GL has.
* clutter/cogl/gl/cogl-texture.c
* clutter/cogl/gles/cogl-texture.c:
Improves the comparability of the files, such that the remaining
differences, better reflect the fundamental differences needed
between GL and GLES. Notably GL no longer uses glBegin/glEnd for
submitting vertices, it uses vertex arrays like GLES and this gives
a small but measurable fps improvement for test-text.
* clutter/cogl/cogl-shader.h: Add a function for setting an
integer uniform, similar to cogl_program_uniform_1f().
* clutter/cogl/gl/cogl-program.c: Implement the GL version
of cogl_program_uniform_1i().
* clutter/cogl/gles/cogl-program.c: Implement the GLES version
of cogl_program_uniform_1i().
Bug 1049 - Clutter doesn't support most GLSL uniforms (patch
by Chris Lord and Neil Roberts)
* README: Update release notes.
* clutter/Makefile.am:
* clutter/clutter-shader-types.[ch]: Add GValue types for
shader values.
* clutter/clutter-actor.[ch]: Update the shader API to use
the newly added GValue support for GLSL shader uniform
setters.
* clutter/clutter-shader.[ch]: Add float and integer convenience
API for single value GLSL uniform setters.
* clutter/cogl/cogl-shader.h: Add new uniform setters.
* clutter/cogl/gl/cogl-context.c:
* clutter/cogl/gl/cogl-context.h:
* clutter/cogl/gl/cogl-defines.h.in:
* clutter/cogl/gl/cogl-program.c:
* clutter/cogl/gl/cogl.c: Update the GL implementation of COGL
to handle the GLSL uniform setters.
* clutter/cogl/gles/cogl-gles2-wrapper.c:
* clutter/cogl/gles/cogl-gles2-wrapper.h:
* clutter/cogl/gles/cogl-internal.h:
* clutter/cogl/gles/cogl-program.c: Update the GLES 2.0 implementation
of COGL to handle the GLSL uniform setters.
* doc/reference/clutter/clutter-sections.txt:
* doc/reference/cogl/cogl-sections.txt: Update the documentation.
* tests/interactive/test-fbo.c:
* tests/interactive/test-shader.c: Update the shader tests.
* tests/conform/test-conform-main.c (main): Do not run the
conformance test suite if we are on X11 but we do not have
a DISPLAY available. Some of the tests require a DISPLAY,
and everything passes through a clutter_init() call which will
fail anyway. If we are running make distcheck on an headless
box we might as well just skip the conformance test suite
without a meaningless error.
* tests/conform/test-mesh-contiguous.c:
* tests/conform/test-mesh-interleved.c:
* tests/conform/test-mesh-mutability.c: Remove the last bare
g_print() from the conformance test suite.
* clutter/clutter-alpha.h:
* clutter/clutter-alpha.c:
(clutter_alpha_set_mode): Use a lookup table to find the alpha
function given the animation mode.
(clutter_exp_in_func),
(clutter_exp_out_func),
(clutter_exp_in_out_func): Add new exponential functions.
* clutter/clutter-script.c: Update the lookup table with the
new animation modes; match "linear" to the ramp-inc alpha
function.
* clutter/clutter-types.h: Add new AnimationMode values.
* tests/interactive/test-easing.c: Update the easing functions
test.
Bug 1014 - Clutter Animation API Improvements
* clutter/Makefile.am:
* clutter/clutter.h: Update the build
* clutter/clutter-types.h: Add AnimationMode, an enumeration
for easing functions.
* clutter/clutter-alpha.[ch]: Add the :mode property to
control the function bound to an Alpha instance using an
enumeration value. Also add six new alpha functions:
- ease-in, ease-out, ease-in-out
- sine-in, sine-out, sine-in-out
* clutter/clutter-deprecated.h: Deprecate the #defines for
the alpha functions. They will be replaced by entries in the
ClutterAnimationMode.
* clutter/clutter-interval.[ch]: Add ClutterInterval, an
object for defining, validating and computing an interval
between two values.
* clutter/clutter-animation.[ch]: Add ClutterAnimation, an
object responsible for animation the properties of a single
actor along an interval of values. ClutterAnimation memory
management is automatic. A simple wrapper method for
ClutterActor is provided:
clutter_actor_animate()
which will create, or update, an animation for the passed
actor.
* clutter/clutter-debug.h:
* clutter/clutter-main.c: Add a new 'animation' debug note.
* clutter/clutter-script.c: Clean up the alpha functions
whitelist, and add the new functions.
* doc/reference/clutter/Makefile.am:
* doc/reference/clutter/clutter-sections.txt: Update the
API reference.
* doc/reference/clutter/clutter-animation.xml: Renamed to
doc/reference/clutter/clutter-animation-tutorial.xml to
avoid clashes with the ClutterAnimation section.
* doc/reference/clutter/clutter-docs.sgml: Renamed to
doc/reference/clutter/clutter-docs.xml, as it was an XML
file and not a SGML file.
* tests/Makefile.am:
* tests/interactive/Makefile.am:
* tests/interactive/test-animation.c:
* tests/interactive/test-easing.c: Add two tests for the
new simple animation API and the easing functions.
* tests/interactive/test-actors.c:
* tests/interactive/test-behave.c:
* tests/interactive/test-depth.c:
* tests/interactive/test-effects.c:
* tests/interactive/test-layout.c:
* tests/interactive/test-multistage.c:
* tests/interactive/test-paint-wrapper.c:
* tests/interactive/test-rotate.c:
* tests/interactive/test-scale.c:
* tests/interactive/test-texture-quality.c:
* tests/interactive/test-threads.c:
* tests/interactive/test-viewport.c: Update interactive tests
to the deprecations and new alpha API.
* clutter/clutter-entry.c:
* clutter/clutter-label.c:
* clutter/clutter-rectangle.c:
* clutter/clutter-script.c:
* clutter/clutter-stage.c: Use the ParamSpecColor and GValue
API for ClutterColor-based properties.
* tests/interactive/test-pixmap.c:
test-pixmap + test-devices accidentally got dropped from the makefiles
when changing the unit test layout; this puts them back.
Bug 1265 - ClutterScore doesn't emit 'started' signal (Bastian
Winkler)
* clutter/clutter-score.c: Emit the ::started signal.
* tests/interactive/test-score.c: Check the emission of the
Score signals.
* clutter/cogl/gles/cogl-gles2-wrapper.c:
Initialise the 'tex' sampler uniform to 0. The GLSL spec
specifically says that you must initialize sampler uniforms. This
fixes texturing for GLES 2 when using the PowerVR simulator via
software Mesa.
* clutter/cogl/common/cogl-mesh.c:
Make sure we use the appropriate cogl_wrap_gl* funcs as appropriate
* clutter/cogl/gles/cogl-gles2-wrapper.c
* clutter/cogl/gles/cogl-gles2-wrapper.h:
In our glColorPointer wrapper we needed to mark our color attribute
as normalized.
* tests/conform/Makefile.am:
When creating unit test symlinks we use the -l gtester option to
list tests, but when using the PVR SDK the test binary also spews
out some extra info that caused lots of random symlinks to be
created. We now grep for lines starting with a '/'
* tests/conform/test-mesh-contiguous.c
* tests/conform/test-mesh-mutability.c:
Use cogl_set_source_color instead of directly calling glColor4ub
* clutter/clutter-behaviour-ellipse.c:
(clutter_behaviour_ellipse_applied): Do not reset the depth
of the actors to which the Ellipse behaviour has been applied
to, unless the behaviour is going to update it because it has
a tilt on the X or Y axis.
(clutter_actor_get_paint_visibility): Be sure to return exactly
TRUE or FALSE instead of zero or some non-zero value in these
functions that return a gboolean. Thanks to Kai Wei for spotting.
* tests/conform/Makefile.am:
* tests/conform/test-conform-main.c:
* tests/conform/test-paint-opacity.c: Add test unit for label,
rectangle and paint opacity.
* clutter/cogl/cogl-color.h:
* clutter/cogl/cogl-path.h:
* clutter/cogl/cogl-types.h:
* clutter/cogl/common/cogl-color.c: Deprecated cogl_color()
in favour of cogl_set_source_color() and friends; store the
CoglColor components as unsigned bytes instead of fixed point
normalized values; add functions for allocating, copying and
freeing CoglColor, for use of language bindings.
* clutter/cogl/cogl.h.in:
* clutter/cogl/cogl-deprecated.h: Added cogl-deprecated.h,
an header file containing the deprecation symbols similar
to clutter-deprecated.h.
* clutter/cogl/gl/Makefile.am:
* clutter/cogl/gl/cogl-texture.c:
* clutter/cogl/gl/cogl.c:
* clutter/cogl/gles/Makefile.am:
* clutter/cogl/gles/cogl-texture.c:
* clutter/cogl/gles/cogl.c: Update the GL and GLES implementations
of COGL after the CoglColor changes.
* clutter/clutter-actor.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-entry.c:
* clutter/clutter-label.c:
* clutter/clutter-rectangle.c:
* clutter/clutter-texture.c: Do not use CoglColor whenever it
is possible, and use cogl_set_source_color4ub() instead.
* clutter/pango/cogl-pango-render.c: Ditto as above.
* doc/reference/clutter/subclassing-ClutterActor.xml:
* doc/reference/cogl/cogl-sections.txt: Update the documentation.
* tests/interactive/test-cogl-offscreen.c:
* tests/interactive/test-cogl-primitives.c:
* tests/interactive/test-cogl-tex-convert.c:
* tests/interactive/test-cogl-tex-foreign.c:
* tests/interactive/test-cogl-tex-getset.c:
* tests/interactive/test-cogl-tex-polygon.c:
* tests/interactive/test-cogl-tex-tile.c:
* tests/interactive/test-paint-wrapper.c: Drop the usage of
CoglColor whenever it is possible.
coordinates
* clutter/cogl/gl/cogl-texture.c: Instead of sorting the vertex
and texture coordinates passed to cogl_texture_rectangle, just
swap both sets whenever the texture coordinates are backward.
