apply_mask made some wrong assumptions that became untrue
after rendering_cleanup landed, such as the number of channels
in the pixmap, causing corruption.
https://bugzilla.gnome.org/show_bug.cgi?id=641975
Currently, attached modal dialog can be grabbed (either by the
title bar, or using Alt+Button1), though they won't move when
dragged. To address this, grab the parent in that case, which
allows to move both the parent and the attached dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=638674
Commit 96c43866 changed the tiling behavior to prefer edge tiling
over maximization in corner cases (well, quite literally). As a
side effect, it only allows untiling of edge-tiled windows by
dragging the window towards the correct edge.
This patch restores the old behavior for untiling, while keeping
the new behavior for untiled windows.
https://bugzilla.gnome.org/show_bug.cgi?id=645455
For tiling, we check whether the pointer is near the edges of
the monitor where the pointer is located, so checking that the
pointer is within the bounds of the monitor is unnecessary and
confusing.
Mark that the the third argument to meta_rectangle_union and
meta_rectangle_intersect is an (out) argument that should be created
by the language binding.
https://bugzilla.gnome.org/show_bug.cgi?id=645247
If dragging the title bar to the edge of the screen to side-tile,
it's easy to end up above the workarea and end up maximized instead.
Make the entire side of the screen act as edge-tiling.
https://bugzilla.gnome.org/show_bug.cgi?id=644961
In a performance or regression testing environment, we may want to
only manage windows from a particular test program, and ignore all
other windows. The MUTTER_WM_CLASS_FILTER environment variable is a
list of WM_CLASS values that should be managed; other windows will
be unmapped and ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=644252
gtk3 no longer has the --screen command-line argument, which mutter
was passing to zenity. Use --display (with an explicitly-specified
screen number) instead.
https://bugzilla.gnome.org/show_bug.cgi?id=643683
This made sense back in the day of stateless window managers,
but gnome-shell isn't. gnome-session will handle gnome-shell
crashing, since it's a required component.
https://bugzilla.gnome.org/show_bug.cgi?id=644529
This adds a preference that when enabled makes all windows not on
the primary monitor be visible on all workspaces (i.e. not part of the
workspace switching handling).
https://bugzilla.gnome.org/show_bug.cgi?id=609258
Sometimes on_all_workspaces is requested by the client/user, and sometimes
its calculated implicitly due to internal state. We split this up so that
we know when the user has explicitly asked for sticky window, when e.g.
setting wmspec properties or storing session info.
on_all_workspaces means this window is visible on all workspaces.
on_all_workspaces_requested, means the user explicitly made the window
sticky somehow (via imported session, _NET_WM_STATE from another wm,
toggled in the window menu, etc). It always implies on_all_workspaces is
TRUE.
Right now the only time we set on_all_workspaces is for override-redirect
windows, but later we can add a "windows on non-primary monitor are not
part of the workspace switching" feature.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
Until the actor is destroyed, we need to have access to the
MetaWindow to access some fields used for painting. Keep a strong
reference to the window rather than just hoping the window will
not be freed.
https://bugzilla.gnome.org/show_bug.cgi?id=642787
We don't actually use the full xrandr to get the primary monitor, we
just rely on the xrandr xinerama compat code to return the primary
monitor first. This lets us avoid adding unnecessary xrandr code and
avoids issues with _NET_WM_FULLSCREEN_MONITORS monitor indexes being
defined wrt xinerama monitor index order.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
The latter move method will place the window by the origin of the
enclosing window decoration/frame, while the former will place by the
origin of the inner window, itself.
(Also moved meta_window_showing_on_its_workspace comment into
gtk-doc)
https://bugzilla.gnome.org/show_bug.cgi?id=642355
When reload_net_wm_state() is called at startup to read the initial
value of _NET_WM_STATE, it was calling recalc_window_type(), but not
recalc_features(), which meant that, eg, meta->skip_taskbar would
never get initialized from meta->wm_state_skip_taskbar, which meant
that next time mutter went to update the window's _NET_WM_STATE, it
would overwrite the app-specified initial values. Fix that.
(In metacity, this bug is masked by the fact that recalc_features()
gets called when reading the intial value of WM_NORMAL_HINTS, which
comes after _NET_WM_STATE in metacity's prop_hooks_table. In mutter,
the table got reordered at some point, exposing the bug.)
https://bugzilla.gnome.org/show_bug.cgi?id=624360
If mutter is going to be a "real" library, then it should install its
includes so that users can do
#include <meta/display.h>
rather than
#include <display.h>
So rename the includedir accordingly, move src/include to src/meta,
and fix up all internal references.
There were a handful of header files in src/include that were not
installed; this appears to have been part of a plan to keep core/,
ui/, and compositor/ from looking at each others' private includes,
but that wasn't really working anyway. So move all non-installed
headers back into core/ or ui/.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
Move all of the mutter code into a new libmutter-wm.so, split its
main() method into meta_get_option_context(), meta_init() and
meta_run(), add methods for using in-process plugins, and add
libmutter-wm.pc pointing to the new library.
The mutter binary is now just a tiny program that links against
libmutter-wm. The --version and --mutter-plugins options are handled
at the mutter level, not in libmutter-wm, and a few strange unused
command-line options (--no-force-fullscreen and --no-tab-popup) have
been removed.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
meta_restart() was broken, in that it restarted mutter with what was
left of argv after GOption and Clutter had possibly modified it.
Rather than try to fix this, just remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
Revert the early_initialize changes (which get in the way in the
"libmutter-wm" paradigm), remove the GConf key for setting plugins,
and remove plugin "params", which weren't being used. Also remove all
the logic for unloading and reloading plugins, since the list never
changes after startup now.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
This changes the introspection configure flag from
--with/--without-introspection to --enable/--disable-introspection,
and changes it so that trying to enable introspection when g-i is not
installed results in an error, rather than being silently ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
It looks amazingly lame if we simply call exit() during logout. While
it's true that for applications that use XSMP, gnome-session will
close them before us, that doesn't do anything for non-XSMP apps,
which we really hope is the common case.
Instead, we just go away when the X server does.
https://bugzilla.gnome.org/show_bug.cgi?id=643437
For GNOME Shell, we need to grab our DBus names *before* we talk XSMP.
gnome-session takes our XSMP connection as "I'm ready", and starts
running all the other random crud that people dropped in as autostart
files. But for example, we need to have claimed
org.freedesktop.Notifications before a lot of said crud starts.
This requires a plugin API version bump.
Misc: Move handling of --version way earlier in main() where
it should be; no point having it wedged after plugin handling.
If we handle a key event then passing it to GTK+ as well can only
cause confusion. Normally GTK+ would do nothing with a key event for
some window it doesn't know about, but plugins might be doing more
things with the GTK+ event queue.
https://bugzilla.gnome.org/show_bug.cgi?id=642426
If a plugin was explicitly specified, falling back to the default
silently is bad; a manager component like gnome-session can
do a better job of handling this scenario.
An example we've hit in gnome-shell is where SpiderMonkey changes
without gjs being rebuilt, and loading the plugin fails due to
unresolved symbols.
But there are obviously others, like the file being missing or
corrupt.
https://bugzilla.gnome.org/show_bug.cgi?id=641384
Similar to the recently added 'size-changed' signal, we may want to do
something in response to a window being repositioned without waiting for
notify::allocation. (Especially since what we can do in notify::allocation
is severely limited by Clutter forbidding queueing an allocation at that
point.)
https://bugzilla.gnome.org/show_bug.cgi?id=641310
If we are previewing hidden windows, we might be previewing them in a context
like a thumbnail view of a workspace where we care about positioning. So, instead
of waiting until the window is first actually shown to place it, if
live_hidden_previews is set, place the window window when we first compute its
visibility, even if we don't end up showing it.
https://bugzilla.gnome.org/show_bug.cgi?id=641309
A plugin that does workspace management on its on may want to set the
workspace layout without having to deal with putting a property
on the root window to be read back and parsed.
Add meta_screen_override_window_layout() that allows the same types
of layouts as _NET_DESKTOP_LAYOUT but without setting a property.
https://bugzilla.gnome.org/show_bug.cgi?id=640552
A logic bug was resulting in the bottom hidden window (hidden means means
minimized or on a different workspace) continually being stacked above
the other hidden windows.
https://bugzilla.gnome.org/show_bug.cgi?id=640679
When we delete a workspace before the active workspace, we need
to upate the _NET_CURRENT_DESKTOP since the active workspace index
changes. To do this workspace.c:set_active_space_hint() is moved
to screen.c:meta_screen_set_active_workspace_hint() so that it
can be shared.
https://bugzilla.gnome.org/show_bug.cgi?id=640581
Emit a signal when the window size changes. While it is already
possible to connect to notify::allocation (or width/height), the
new signal is emitted outside a clutter allocation cycle, which
makes it more convenient when adjusting an actor's size/position
in response.
On gcc-4.4 (void)<expr> doesn't suppress warnings from
__attribute__((warn_unused_result)), so use
G_GNUC_UNUSED (which expands to __attribute__((unused))) instead
of removing a dummy variable.
https://bugzilla.gnome.org/show_bug.cgi?id=640508
As the tile preview is shown or hidden when a window is dragged
around, it may stick around if the drag operation is cancelled.
Make sure that the preview is hidden in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=639988
Drag operations may be cancelled, in which case the dragged window
should be restored to the position/state it had when the drag was
initialized. In order to do this for tiled states, the original
state has to be saved during the operation.
https://bugzilla.gnome.org/show_bug.cgi?id=639988
The previous tiling state of a grabbed window should be restored
if the drag operation is cancelled (by hitting the Escape key).
This might involve to meta_window_tile(), so export the function
in window-private.h.
https://bugzilla.gnome.org/show_bug.cgi?id=639988
GtkStyle has been deprecated in favor of GtkStyleContext. A full
port would involve replacing GdkColor with GdkRGBA - leave this
out for the time being.
Bump the required version of GTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=637761
We want switching between the windows of an application to be an easily
accessible operation. The convenient and memorable keybinding is the
key above the tab key - but the keysym for that key isn't consistent
across different keyboard layouts.
Add code that figures out the key from the XKB geometry and a magic
keysym name "Above_Tab" that refers to this key and switch
the default binding for cycle_group to <Alt>Above_Tab. (This will
have no effect for the normal case of getting the key binding from
GConf until this patch is applied to Metacity as well.)
https://bugzilla.gnome.org/show_bug.cgi?id=635569
It may be desirable for theme authors to treat side-by-side tiled
windows differently, for instance to give the edge-touching border
a width of 0, so add additional frame states for tiled windows.
https://bugzilla.gnome.org/show_bug.cgi?id=637330
With the existing background functions, single buttons can not be
styled separately - on the left side, the style of the left button
is picked, and the right button's style on the right side.
As theme authors may want to add rounded corners to button groups
as a whole, it makes sense to treat the case of a single button in
a group differently.
https://bugzilla.gnome.org/show_bug.cgi?id=635683
When validating button functions and frame styles, the required
format version of the features used in the theme was compared to
the major version number of the supported format, limiting additions
to major theme format bumps.
Use peek_required_version() instead, so the minor version number
of the supported theme format is taken into account.
https://bugzilla.gnome.org/show_bug.cgi?id=635683
While the configured layout is taken into account for positioning
the buttons, the mapping from button function states to button
position states just assumed the default button layout in LTR
locales.
Do a proper mapping depending on the actual layout instead.
https://bugzilla.gnome.org/show_bug.cgi?id=635686
This patch removes the ability to disable compositing in mutter. As
clutter compositing was the reason for the fork from metacity, turning
compositing off does not make sense.
https://bugzilla.gnome.org/show_bug.cgi?id=626875
To deal with reentrancy from compositor plugins doing things like
moving windows between workspaces in an effect callback, update
the visible_to_compositor flag before calling into the compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=613124
When a compositor is present, we keep the visibility state of the
compositor windows in sync with window->visible_to_compositor. We need
to do the same when enabling the compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=613124
* GL_TEXTURE_RECTANGLE_ARB not avaliable
* clutter_glx_texture_pixmap_using_extension / CLUTTER_GLX_TEXTURE_PIXMAP not avaliable
Signed-off-by: Andreas Mueller <schnitzeltony@gmx.de>
Commit 2c8c1c6df49 in gtk+ removed gdk_display_get_core_pointer().
The equivalent functionality can be achieved by using the
GdkDeviceManager to retrieve the client pointer device.
Maximized tiled windows end up with an inconsistent tile mode when
unmaximized by other means than dragging the window free (e.g.
using the unmaximize button or double clicking the title bar), so
reset the tile mode when unmaximizing.
This is not a problem for side-by-side tiling, as there are no
alternatives to dragging the window free.
When a tiled window is maximized (e.g. by clicking the title bar
button), unmaximizing the window restores the tiled state. While
this is reasonable for side-by-side tiling, it is confusing for
"maximize" tiled windows, as unmaximization has no visible effect.
Change unmaximize to only restore the tiled state of side-by-side
tiled windows.
The original patch triggered "maximize" when the window was dragged
to the top, so that the pointer was below or on the monitor edge and
above the work area's top.
If there's no chrome at the top of the monitor, so that monitor edge
and work area top fall together, the pointer cannot be moved above
the work area's top, so tiling was not triggered.
GTK is about to clean up its code and remove duplicate macros and
GdkDrawable usage. To prepare for that landing, we use the future-safe
versions of the same calls.
https://bugzilla.gnome.org/show_bug.cgi?id=636302
The old behavior of being able to shake loose a maximized window
overlaps with and is for the most part superceded by top edge tiling.
This commit changes the code to only enable shake loose behavior
when edge tiling is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
In addition to the existing side-by-side tiling modes, this commit
adds a new "maximize" tiling mode. It allows the user to maximize
their windows (in other words, tile with the edge panels) by dragging
their window to the top edge of the monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
The meta_window_handle_mouse_grab_op_event function ensures
the tile_mode variable is in a consistent state after a drag
op is finished.
The way this is current done is:
if (!window->maximized_vertically &&
window->tile_mode != META_TILE_NONE)
window->tile_mode = META_TILE_NONE;
While valid, it doesn't "read" as well as using the
META_WINDOW_TILED_SIDE_BY_SIDE macro, since the macro is specifically
about side-by-side tiling.
This commit just changes things to use the macro and to not bother
checking the tile mode (since if we just reset it anyway, then it doesn't
matter if the value is right or wrong to begin with).
https://bugzilla.gnome.org/show_bug.cgi?id=630548
Currently, the new tiling feature, supports side-by-side, horizontal
tiling when dragging windows to one of the vertical edges of a monitor.
Other types of tiling (on other monitor edges) are potentially useful,
though.
This commit renames the preference from side_by_side_tiling to
edge_tiling.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
A direction parameter is passed to meta_compositor_switch_workspace(),
to indicate the direction of the switch depending on the workspace
layout.
In contrast to the switcher popup, this parameter does not take the
text direction of the locale into account. Change this, so that the
workspace switching animations move in the correct direction.
https://bugzilla.gnome.org/show_bug.cgi?id=636083
overlay_key_combo needs the same treatment as other keycodes on a
change - we should always recompute it if we have a keysym not
a keycode, and not only if the keycode hasn't already been
computed.
Simplify the keymap loading logic by unifying the different
branches; in the reorganization this patch fixes a bug where when
we got a MappingKeyboard event we wouldn't update virtual modifiers
correctly.
Based on a patch by Thomas Thurman <tthurman@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=565540
* Select for XKB keyboard notification events explicitly; since GTK+
has selected for XKB events, delivery of old-school MappingNotify
events is disabled.
* Fix a bug where once a keycode was loaded for a key binding,
it would never be reassigned; we want to laod new keycodes for
all bindings that have a key symbol rather than a fixed
keycode.
[ With fixes from Owen W. Taylor <otaylor@fishsoup.net> ]
https://bugzilla.gnome.org/show_bug.cgi?id=565540
Protect against shape_region or bounding_region being NULL in check_needs_shadow.
This can happen for short lived windows and result into a crash.
https://bugzilla.gnome.org/show_bug.cgi?id=635421
Since we aren't depending on Clutter 1.5 or using the new
CoglPipeline name elsewhere, we need to stick to the old
COGL_MATERIAL_WRAP_MODE_* names, which are provided with
compatibility defines in Clutter 1.4.
Pointed out by Rico Tzschichholz
If we have repeats on for a full-sized image, then if the background
is displayed scaled (for example, in a desktop preview mode) then we
can get artifacts along the edge of the background where the repeat
of the opposite edge is blended in by bilinear scaling. So turn off
repeats when the screen and background image sizes match.
https://bugzilla.gnome.org/show_bug.cgi?id=634833
Add code to track and draw the root window background. The advantage of doing
it here as compared to in a plugin is that we can use the visiblity smarts
of MetaWindowGroup to optimize out drawing the background when obscured.
If handling other than tracking the _XROOTPMAP_ID property is desired in the
future, more functionality like setting the background from a file or doing
cross-fades can be added.
The new background actor is exposed to plugins via meta_plugin_get_background_actor()
similar to other exposed actors to allow cloning the background for use in
other displays. The actual class is not installed for public consumption at
the moment since it has no useful methods.
https://bugzilla.gnome.org/show_bug.cgi?id=634833
Create new cogl-utils.[ch] and move a helper function from
MetaShadowFactory there as meta_create_texture_material(); this
allows us to create single-layer materials from different parts of
Mutter and have them share the same template material.
Also expose a function for creating a 1x1 texture of a given
color meta_create_color_texture_4ub().
https://bugzilla.gnome.org/show_bug.cgi?id=634833
When in a partial stage paint, we can combine that with the visibility
information in MetaWindowGroup to further eliminate unneeded drawing.
Since there is no current Clutter API to access the current clip,
drop to using GL directly.
https://bugzilla.gnome.org/show_bug.cgi?id=634779
This is just a microptimization, as we pretty much always use
TFP (and do the check every time we set a pixmap),
we can let gcc generate better code here.
https://bugzilla.gnome.org/show_bug.cgi?id=633002
For various reasons (mostly the stack tracker correctly predicting the
stacking order before getting events, but also because of the processing
that the compositor does to get the actor stacking order) the compositor
can be told to sync the stack when it has nothing to do. Detect this
at the last moment before actually telling Clutter to restack to avoid
triggering unnecessary redraws.
https://bugzilla.gnome.org/show_bug.cgi?id=634771
Since we can't distinguish a ConfigureEvent that indicates a raise
from a ConfigureEvent that indicates a move, we get lots of
STACK_OP_RAISE_ABOVE events for windows that are already in the
right place in the stacking order. Avoid queueing a restack in that
case.
https://bugzilla.gnome.org/show_bug.cgi?id=634771
Fullscreen and maximized windows never have visible shadows - the only
case where we would ever see them is if they bleed onto an adjacent
monitor and that looks bad.
It's small performance win to avoid computing them, and this also avoids
painting the top shadow for all maximized windows in GNOME Shell - since
the top panel isn't a X window, it doesn't factor into the computation
of what parts of windows are visible and maximized windows are computed
as having a top shadow.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
These functions duplicate existing properties; they are added for
convenience and to avoid the GObject property code on some
performance critical painting paths.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
Instead of making optimizing obscured shadows an all-or-none operation,
pass the clip region to meta_shadow_paint() and only paint the 9-slices
that are at least partially visible.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
Instead of setting shadow parameters on individual windows, add the
idea of a "shadow class". Windows have default shadow classes based
on their frame and window type, which can be overriden by setting
the shadow-class property.
Each shadow class has separably configurable parameters for the
focused and unfocused state. New shadow classes can be defined with
arbitrary names.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
Frame types will form the bases of shadow classes, which are strings,
so export the to-string function so that we can do the conversion
uniformly.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
The basic MetaShadowFactory type is moved to a public header, while
the functions to fetch and paint shadows are kept private.
The public object will be used for configuration of shadows by
plugins.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
For attached modal dialogs, we want the shadow to fade out at the top
as if the window was glued to the parent at the top. Add a
shadow-top-fade property to MetaWindowActor and the corresponding
parameter to meta_shadow_factory_get_shadow().
The internal implementation of MetaShadow is adjusted to work
in terms of an "inner border" and "outer border" instead of doing
the calculations in terms of an aggregate border and the spread
of the shadow. The old way of doing things gets clumsy when the
top_fade distance is added in as well.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
Add a new frame type META_FRAME_TYPE_ATTACHED which is used for
attached modal dialogs.
The theme format version is bumped to 3.2, and attached windows
can have borders defined in a metacity-theme-3.xml as:
<window version=">= 3.2" type="attached" style_set="[name]"/>
If no style is defined for "attached", drawing will fall back
to the "border" type.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
The current shadow code just uses a single fixed texture (the Gaussian
blur of a rectangle with a fixed blur radius) for drawing all window
shadows. This patch adds the ability
* Implement efficient blurring of arbitrary regions by approximating
a Gaussian blur with multiple box blurs.
* Detect when multiple windows can use the same shadow texture by
converting their shape into a size-invariant MetaWindowShape.
* Add properties shadow-radius, shadow-x-offset, shadow-y-offset,
shadow-opacity to allow the shadow for a window to be configured.
* Add meta_window_actor_paint() and draw the shadow directly
from there rather than using a child actor.
* Remove TidyTextureFrame, which is no longer used
https://bugzilla.gnome.org/show_bug.cgi?id=592382
The size_request vfunc is going to be dropped in GTK3; replace
the usage in MetaAccelLabel and MetaPreview with
get_preferred_width/get_preferred_height vfuncs.
https://bugzilla.gnome.org/show_bug.cgi?id=633352
In GTK+ 3, it's mandatory to have a GdkDevice in a synthesized event,
so fill in the pointer device for the events we synthesize and forward
to GTK+. Since gdk_event_set_device() only works for allocated events,
we need to switch to gdk_event_new() rather than using stack allocated
events.
https://bugzilla.gnome.org/show_bug.cgi?id=633401
Now that we create MetaWindow objects for override-redirect windows, we need
to check all key press events to see if they are on GTK+ widgets, not just
events that don't match a MetaWindow. This fixes a problem with alt-Tab stealing
grabs away from the window menu.
https://bugzilla.gnome.org/show_bug.cgi?id=633398
With client side windows, mixing GDK event delivery with explicit calls
to XUngrabPointer() can result in GDK losing button release events
it expects to get. This means that GDK thinks there is an implicit
grab in effect when there is none and send events to the wrong window.
Avoid this by bypassing GDK's event handling for most mouse events.
We do a simplified conversion of the X event into a GdkEvent and send
it to directly to libgtk for delivery.
We make an exception when a GDK grab is already in effect - this is
needed for the correct operation of menus.
http://bugzilla.gnome.org/show_bug.cgi?id=599181
While the Meego developers agreed to switching mutter to GTK+-3.0
unconditionally a while ago, Canonical used a GTK+-2.0 build for their
Unity project. As Canonical now announced a switch to compiz as their
window manager, there is no longer a reason to maintain GTK+-2.0
compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=633133
meta_display_process_key_event() always looks up events based on the
"default" keysym for the keycode, so we should do the same here. This
fixes, eg, the lookup of Shift-Alt-Tab (which would otherwise be
unrecognized because the keysym would be XK_ISO_Left_Tab rather than
XK_Tab).
https://bugzilla.gnome.org/show_bug.cgi?id=632155
In ui/fixedtip.c, use g_signal_connect instead of g_signal_connect_swapped
since we're not using the data pointer (and for clarity).
At the same time, ensure that both the GTK2 and the GTK3 code paths
have the correct signature for the handler.
https://bugzilla.gnome.org/show_bug.cgi?id=633051
The code for defining a color as a constant had broken logic: it
would try to parse the color first as an double, then as an integer;
the second attempt would produce an error about overwriting the
already-set-GError. Then it would clear the error and store the constant
as a color.
Use the fact that colors have to start with a letter or #, divide the
space of constants into:
- Integers
- Doubles
- Colors
so we get good error messages. Based on a patch by
William Jon McCann <jmccann@redhat.com>.
Note that this breaks the ability to specify an integer constant as
identical to another integer constant (the same didn't work for doubles.)
I think this was an accidental side effect of the code and not something
that was intentional or people were relying on
https://bugzilla.gnome.org/show_bug.cgi?id=632116
Remove --allow-unprefixed option to the scanner, and fix resulting
problems:
* theme.h and boxes.h are split into a main -header and a private
header that includes stuff that is not generally useful and
hard to introspect. Merge theme-parser.h into theme.h.
* meta_display_get_atom() and meta_window_get_window_type_atom()
are marked as (skip)
* Fix annotation: (element-type Strut) => (element-type Meta.Strut)
https://bugzilla.gnome.org/show_bug.cgi?id=632494
Move all objects and functions namespaced with Mutter into the Meta namespace
to get a single consistent namespace. Changes that aren't simply changing mutter
to meta:
MutterWindow => MetaWindowActor
mutter_get_windows => meta_get_window_actors
mutter_plugin_get_windows => meta_plugin_get_window_actors
https://bugzilla.gnome.org/show_bug.cgi?id=628520
In many places, MetaRegion was being used entirely internally, rather
than for gtk2/gtk3 compatibility. In these cases, it's simpler to just
depend on cairo-1.10 (for both gtk2 and gtk3) and use cairo_region_t.
The few places where we did need GDK compatibility (GdkEvent.region and
gdk_window_shape_combine_mask) are replaced with a combination of
converting GdkRegion to cairo_region_t and conditional code.
https://bugzilla.gnome.org/show_bug.cgi?id=632474
Simplify the code by noting that when we have square end-caps, the
results of generic line path give the right pixel-aligned rectangle
for horizontal/vertical lines.
Add comments and remove some extra braces.
https://bugzilla.gnome.org/show_bug.cgi?id=630426
Currently mutter-window has its own type field, even though the same
information is already present in meta_window.
And while at it get rid of MetaCompWindowType, it is equally redundant.
https://bugzilla.gnome.org/show_bug.cgi?id=630363
Commit aa65f94c67 that started passing
cairo_t around broke offsets. Since passing cairo_t makes them
unnecessary, this patches removes them rather than fixing them.
This patch changes API.
https://bugzilla.gnome.org/show_bug.cgi?id=630203
With the newest changes to GTK3, some things were changed. This patch
now uses the features introduced in gtk3-compat.h in previous patches.
This patch also introduces a macro named USE_GTK3 that is used to
differentiate between GTK3 and GTK2. Its main use is differenting
between expose and draw handlers for GtkWidget subclasses.
The draw vs expose handlers question is usually handled by using ifdefs
at the beginning and end to set up/tear down a cairo_t and then use it.
However, when the function is too different and too many ifdefs would be
necessary, two versions of the function are written. This is currently
the case for:
- MetaAccelLabel
- MetaFrames
https://bugzilla.gnome.org/show_bug.cgi?id=630203
Similar to the region compatibility shim, we will soon need a
compatibility shim around GdkPixmap/cairo_surface_t. For now, the patch
just introduces the compatibility layer.
This patch also does not include the function
meta_gdk_pixbuf_get_from_pixmap() as that function will need special
treatment in GTK3 anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=630203
Rename meta_frames_paint_to_drawable() to meta_frames_paint() and make
it take a cairo_t as an argument instead of creating the cairo_t itself.
This patch refactors code for GTK3 changes where code needs to handle
cairo_t and not GdkDrawable arguments.
https://bugzilla.gnome.org/show_bug.cgi?id=630203
This commit is in preparation for the work happening in GTK3, which will
use Cairo for drawing exclusively. So it is necessary to move all
drawing code to Cairo. In this commit the "gtk2" code is used for both
gtk2 and gtk3; compatibility with newer versions of gtk3 where different
code is needed will be added subsequently.
For compatibility with older GTK versions, the file gdk2-drawing-utils.h
provides a compatibility layer.
The commit changes the API of libmutter-private.
https://bugzilla.gnome.org/show_bug.cgi?id=630203
For functions (but not callback types), '(closure)' is used on the
callback parameter, and takes the name of the parameter which is
the closure/user data.
A maximized window can't be resized from the screen edges (preserves
Fitts law goodness for the application), but it's still possible
to start a resize drag with alt-middle-button. Currently we just
don't let the user resize the window, while showing drag feedback;
it's more useful to let the user "break" out from the resize.
This provides a fast way to get a window partially aligned with
the screen edges - maximize, then alt-drag it out from one edge.
Behavior choices in this patch:
- You can drag out a window out of maximization in both directions -
smaller and larger. This can be potentilaly useful in multihead.
- Dragging a window in only one direction unmaximizes the window
fully, rather than leaving it in a horizontally/vertically
maximized state. This is done because the horizontally/vertically
maximzed states don't have clear visual representation and can
be confusing to the user.
- If you drag back to the maximized state after breaking out,
maximization is restored, but you can't maximize a window by
dragging to the full size if it didn't start out that way.
A new internal function meta_window_unmaximize_with_gravity() is
added for implementing this; it's a hybrid of
meta_window_unmaximize() and meta_window_resize_with_gravity().
Port of the metacity patch from Owen Taylor in bug 622517.
https://bugzilla.gnome.org/show_bug.cgi?id=629931
The widget needs to be visible and mapped for GTK3 to deliver expose
events to the widget. This is achieved by making the map function a
no-op and calling gtk_widget_show() instead of just calling
gtk_widget_realize().
Apart from making GTK think the widget is drawable, the effect is the
same.
https://bugzilla.gnome.org/show_bug.cgi?id=630203
This way, we can remove the special casing in
meta_frames_paint_to_drawable().
Since the setup in meta_frames_paint_to_drawable() is relatively cheap,
doing it once per rectangle in the expose area should be fine.
https://bugzilla.gnome.org/show_bug.cgi?id=630203
gtk_rc_get_style_by_paths() returns NULL if no matching style was
found and the default style should be used. Actually use the default
style in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=630003
The hacks we were playing by calling gdk_error_trap_push() and then
resetting the error handler are incompatible with the rewrite of
GDK error traps.
Since the new error code has some features that simplify what we
are doing (like automatically figuring out whether a XSync() is needed)
and because our custom error handler didn't have a lot of a point,
use a separate code path for GTK+ 3.0 builds that just uses the
GDK error traps straight-up without a custom error handler.
https://bugzilla.gnome.org/show_bug.cgi?id=630195
Wine sets _NET_WM_USER_TIME_WINDOW to point to an unmapped toplevel;
this was causing much confusion because both the real window and
the unmapped window were in the window stack and mapped back to the
same MetaWindow.
Debugged by Alban Browaeys
https://bugzilla.gnome.org/show_bug.cgi?id=593887
When dragging a window over a screen edge and dropping it there,
maximize it vertically and scale it horizontally to cover the
corresponding half of the current monitor.
Whenever a "hot area" which triggers this behavior is entered, an
indication of window's target size is displayed after a short delay
to avoid distraction when moving a window between monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=606260
Add a preference /apps/mutter/general/attach_modal_dialogs. When true, instead
of having independent titlebars, modal dialogs appear attached to the titlebar
of the parent window and are moved together with the parent window.
https://bugzilla.gnome.org/show_bug.cgi?id=612726
Cleanly build with --warn-fatal. Implementation:
* Liberally apply (skip) where the API is clearly C only, e.g. uses
XLib. The theming code and MutterPlugin are skipped too.
* Add missing (transfer) and (element-type) annotations
For a few functions that had a comment, I turned it into gtk-doc, but
I didn't (with a few exceptions) try to write new documentation in
this pass.
Libmutter-private's preview-widget.h depends on region.h, so that one
needs to be installed as well in order to keep dependees build.
Signed-off-by: Tomas Frydrych <tf@linux.intel.com>
XDamageSubstract can create a BadDamage
(when the window goes away before XDamageSubstract is called)
and thus resulting into a crash.
Fix it by protecting the call with an error trap.
https://bugzilla.gnome.org/show_bug.cgi?id=623235
The gdk_window_get_background_pattern() function copied from GDK and
introduced in commit 0839c10 has a small syntax error and uses a private
API (_gdk_drawable_ref_cairo_surface()). This patch imports the missing
API and fixes the syntax error.
https://bugzilla.gnome.org/show_bug.cgi?id=626583
If the user just presses a modifier (e.g., shift) during Alt+Tab grab, we need
to keep the grab in place to allow the custom Alt+Tab handler to deal with what
might simply be a change of tabbing direction.
https://bugzilla.gnome.org/show_bug.cgi?id=613126
We don't get correct notifications for the ::cogl-texture property of
ClutterTexture in the case when we are unsetting the pixmap before calling
XFreePixmap. (This is because ClutterX11TexturePixmap is a hack on top
of ClutterTexture and we're a hack on top of that.) So we need to manually
clear everything out.
For consistency we also make sure that we drop all references to dead
textures:
- When the shape changes
- If the window pixmap texture changes without first being cleared
(this is not expected to happen)
https://bugzilla.gnome.org/show_bug.cgi?id=627210
This patch adds a check in event_callback () to check whether the
window is override-redirect or not, and avoids unnecessarily calling
meta_window_set_user_time () if it is.
https://bugzilla.gnome.org/show_bug.cgi?id=606158
Rather than trying to find out from Clutter whether mipmap generation
can be used together with texture_from_pixmap, just always assume
it can't and use the MutterTextureTower emulation code.
This fixes a problem with our previous hack for doing the query
no longer working. In the rare cases where mipmap generation
is supported, it is unlikely to produce significantly more efficient
or better looking results than the emulation. (In terms of efficiency,
we have better knowledge of when we need to update the lower mipmaps
and when we don't than CoglTexturePixmapX11.)
Some care is taken so mutter_shaped_texture_set_create_mipmaps() works
when changed on the fly and properly discards the old mipmap levels.
This isn't necesary currently, since it can only be controlled via
envvar, but is easier than future-proofing through documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=627087
At least with the Mesa/DRI implementation of GLX, calling XFreePixmap()
on a pixmap before glxDestroyPixmap() on the corresponding GLX pixmap
causes an X error. To avoid triggering this with the new
ClutterTexturePixmapX11 code, we need to move our XFreePixmap after
unsetting the pixmap from the actor.
https://bugzilla.gnome.org/show_bug.cgi?id=627210
gdk_window_get_back_pixmap() and gdk_window_get_background() have
been removed/deprecated. Use gdk_window_get_background_pattern()
as replacement.
https://bugzilla.gnome.org/show_bug.cgi?id=626583
When we do pseudo-management on an override-redirect window, we have to be
careful to augment the existing event mask, not replace it, or
delivery of pointer events will be disrupted.
When we unmanage a window, we shouldn't try to unselect events at all,
since that will interfere with event selection done by GDK.
http://bugzilla.gnome.org/show_bug.cgi?id=597763
Starting with clutter 1.4 clutter / cogl only knows whether TFP is in use after
setting the pixmap, so doing the check before setting the pixmap will just
lead to a wrong message.
https://bugzilla.gnome.org/show_bug.cgi?id=624757
g-ir-scanner is currently buggy and confuses the Gdk.Rectangle alias
with MetaRectangle. Since this is moderately hard to fix in
gobject-introspection and the fix would conflict with in-progress
changes, work around by doing a 'sed job' on the generated Meta.gir.
https://bugzilla.gnome.org/show_bug.cgi?id=623639
Export a boxed type for MetaRectangle; this is mostly of interest
because GdkRectangle has been turned into a typedef for
cairo_rectangle_int_t which causes massive problems for using it from
gobject-introspection based language bindings.
https://bugzilla.gnome.org/show_bug.cgi?id=623335
In order to replace calls to deprecated GDK code, the current
development version of GTK+ is required. Add some basic compatibility
code to allow building mutter with GTK+ 2.18.
https://bugzilla.gnome.org/show_bug.cgi?id=587991
The current effect API passes an unnecessary list of windows to
switch_workspace() and forces a window to be passed in when killing
the switch_workspace() effect.
We can simplify the interface to correspond more closely to how
it is actually used and fix these problems:
Remove the actors parameter to plugin->switch_workspace
Remove the events parameter to plugin->kill_effect and rename it to kill_window_effects
Add plugin->kill_switch_workspace
Remove mutter_plugin_manager_kill_effect
Add mutter_plugin_manager_kill_window_effects
Add mutter_plugin_manager_kill_switch_workspace
Remove mutter_plugin_effect_completed
Add mutter_plugin_[minimize/map/destroy/maximize/unmaximize]_completed
https://bugzilla.gnome.org/show_bug.cgi?id=621082
A mismerge of the Metacity commit "4943d79 Prevent window self-maximisation"
caused the window's user set size and position to be saved *before*
actually resizing the window to the unmaximized position rather than after.
This meant that after unmaximization the window was in an inconsistent
state and anything that caused a resize to be queued (like a change in
window properties by the application) would cause it to pop back to
the maximized size and position.
https://bugzilla.gnome.org/show_bug.cgi?id=621413
It's useful for plugins to be able to easily detect whether
or not a window is from a remote host. Also, make use of this
in the window delete codepath, instead of looking up the hostname
each time.
https://bugzilla.gnome.org/show_bug.cgi?id=620585
While debugging a focus problem, I noticed that Mutter had exactly
the debug statements I wanted under the META_DEBUG_FOCUS topic.
However, calling meta_set_verbose (true) results in enormous amounts
of other messages, and it's inconvenient to filter after having
started mutter.
This patch allows one to call Meta.add_debug_topic(Meta.DebugTopic.FOCUS)
from a console, and get just what one wants.
https://bugzilla.gnome.org/show_bug.cgi?id=620359
In commit d34ae764769 I switched mutter-window to ask for Raw rectangles
from the X server. This avoided 2 non synchronous and 2 synchronous X
requests per window with damage, per frame; 2 (non-sync) to
create/destroy a temporary region to copy the damage region into, 1 to
request the server to copy the damage region into a our given region and
another to fetch that region back into the client. The problem with raw
events though is that it's possible to DOS the compositor with them.
Instead of receiving an event for every bit of damage this patch instead
asks the server to only report BoundingBox changes to the damage region.
https://bugzilla.gnome.org/show_bug.cgi?id=611838
This function returns xid of the WM leader window (as defined by the
_NET_SUPPORTING_WM_CHECK mechanism of EWMH). For use by plugins that wish to
attach custom properties to this window.
https://bugzilla.gnome.org/show_bug.cgi?id=613125
Changing the number of workspaces via an external pager relies on the gconf
key; if a plugin adds or removes workspaces on the fly, we can get into a
situation when the stale number stored by the preferences matches the new
number requested by the pager, in which case the pager request becomes a nop.
This commit ensures that when the meta_screen_append_new_workspace() or
meta_screen_remove_workspace() functions are called, the stored value is
updated accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=613127
A per-window _MUTTER_HINTS property allowing plugins to use custom hints. The
property holds a colon separated list of key=value pairs; plugin-specific keys
must be suitably namespaced, while 'mutter-' prefix is reserved for internal
Mutter use only.
This commit adds MetaWindow::mutter-hints property, and
meta_window_get_mutter_hints() accessor, as well as the internal machinery for
reading and updating of the hints.
https://bugzilla.gnome.org/show_bug.cgi?id=613123
To replace all calls to deprecated code, GTK+ 2.20 is required - add
some basic compatibility code, so that it is still possible to build
mutter with GTK+ 2.18 when not using -DGSEAL_ENABLE.
https://bugzilla.gnome.org/show_bug.cgi?id=595496
COGL bug http://bugzilla.openedhand.com/show_bug.cgi?id=2110 results
in pending drawing at the time of cogl_offscreen_new_to_texture() going
to the newly created framebuffer rather than the stage.
This would result in most windows being missing for the first frame
when a new window is mapped.
Work around this by calling cogl_flush() before
cogl_offscreen_new_to_texture().
https://bugzilla.gnome.org/show_bug.cgi?id=618138
The beginning maximization/unmaximization don't go through
start_effect_simple(), so we need to freeze the window
separately.
Change MutterWindow.freeze_count to a signed integer for
consistency with other counts, and so the logic for
checking for errors works properly.
https://bugzilla.gnome.org/show_bug.cgi?id=616546
This changes the way we handle Damage events so instead of getting an
event when the damage region of a pixmap becomes non-empty we now get
sent all damage rectangles and stream those all though to
ClutterX11TexturePixmap using clutter_x11_texture_pixmap_update_area()
For Clutter 1.2, ClutterGLXTexturePixmap was updated so that calls to
clutter_x11_texture_pixmap_update_area are now cheap (glXBindTexImageEXT
calls are now deferred until just before painting) and since
ClutterGLXTexturePixmap is now capable of queueing clipped redraws that
can result in only updating a sub-region of the stage during a repaint
cycle (and using glXCopySubBufferMESA to present the sub-region redraw
to the front buffer) this should improve performance and reduced power
consumption for a range of use cases. (For example viewing a website
that has animated adverts doesn't force the whole screen to be redrawn
for each frame of the advert)
Besides being able to take advantage of glXCopySubBuffer to only update
a small region of the stage the fact that this patch makes Mutter now
request RawRectangles from the X server means we no longer do a
synchronous X request for a complete Damage Region for every window
damaged each frame. This should also improve performance.
CLUTTER_PAINT=redraws can be used to visualize what parts of the stage
are redrawn and with this patch applied I can open a terminal and as I
type I see that only the damaged areas of the terminal are being
redrawn.
In the case where a mutter window is created for an X Window that is
already mapped then we weren't calling mutter_window_mark_for_repair and
so we weren't calling XCompositeNameWindowPixmap e.g. for menu windows.
This doesn't get noticed because as soon as some damage gets delivered
for such windows the pixmap will be named anyway, but if we were to
change how damage is handled this would result in broken menus.
We now call mutter_window_mark_for_repair in mutter_window_new when the
given Window is already mapped.
It's nice to indicate when a title is truncated with an ellipsis.
Because themes may draw a title multiple times to draw a shadow, or
may include the window icon within the title area, we can't determine
the proper ellipsization width automatically, so add an optional
attribute to the <title/> element "ellipsize_width" which, if set,
is the width to ellipsize at.
This is only enabled if a theme version of 3.1 is required.
When it's not set, we keep the old behavior of just letting the
title be clipped with a hard edge.
https://bugzilla.gnome.org/show_bug.cgi?id=591842
Sometimes you want to position something (usually the title) to be centered
with respect to the entire frame instead of centered with respect to the
individual piece currently being drawn.
This patch adds frame_x_center and frame_y_center variables that represent
the X/Y centers of the frame in the coordinate system of the piece being
drawn.
The theme version is bumped from 3.0 to 3.1 (3.0 is just the new version
system, 3.1 will have all the features we add for Mutter-2.28.)
position expressions
https://bugzilla.gnome.org/show_bug.cgi?id=591842
Although multi-screen support has not been tested and probably
doesn't fully work, the basic setup for multi-screen is that
we have the same list of plugins for all screens, but a different
instance of the plugins for each screen.
To allow plugins to do setup that is screen independent and needs
to occur early in the setup process, we identify a "default plugin
manager" and load (but not start) that plugin manager's plugins
immediately after we know our list of plugins.
That plugin manager is then reused for the first screen we open
and the plugins are started at that time. Separate plugin managers
are loaded and started for any other screens we open.
(A plugin could keep track of whether the screen-independent
setup has been done in a static variable, or it could do everything
in a way that is safe to do repeatedly.)
https://bugzilla.gnome.org/show_bug.cgi?id=615586
Allow a plugin to redirect preferences from one GConf location
to another GConf location. This is useful for keys that need to be
set differently in a plugin-managed environment (like GNOME Shell)
as compared to in standalone Metacity.
Overriding is implemented by overwriting the keys in the arrays
of preferences; a list of the current overrides is stored to allow
proper memory management when an override is itself overriden.
(we need to know whether to free the old keys or not)
This patch cleans up the comments in prefs.c a bit as well; some ideas
about less-exciting potential improvements were removed to make the
comments explaining the structure easier to figure out.
https://bugzilla.gnome.org/show_bug.cgi?id=615586
Rather than using the plugin objects constructed() method for doing
setup that requires the MetaScreen, add an explicit start() method
that is called after the screen is set.
The reason for this is that this allows plugin objects to be created
early before the bulk of Metacity setup, which then allows plugins
to affect how the setup happens. (For example, to change the way
that preferences are loaded.)
This is an incompatible change, since 'screen' is now not set in the
constructed method, so the plugin API version is bumped.
https://bugzilla.gnome.org/show_bug.cgi?id=615586
The current mechanism of metacity-theme-1.xml and metacity-theme-2.xml
is not flexible for allowing small-scale additions. With this patch
we bump the major version version once more to metacity-theme-3.xml
and add a single feature:
Any element in the DTD can have an attribute:
version="[<|<=|=>|>] MAJOR.MINOR"
And it will be ignored unless the predicate is met. (< and > should
be to be entity escaped as < and >)
This allows having alternate sections of the theme file for older and
newer version.
* Required GLib version is bumped to 2.14 so we can parse versions
with a regular expression.
* We switch internal version numbers to be "1000 * major + minor"
* We keep a stack of the maximum required version for the current portion
the XML tree so that the "cannot use versions you don't require" stricture
of the old code can be made local to a subpart of the tree.
* A version on the top metacity_theme element causes the entire file to
be ignored; this allows having one metacity-theme-3.xml for version 3.2
and newer (say) and a metacity-1.xml for everything old.
Actual new features will be added starting with 3.1 - 3.0 is just the
version="" feature.
http://bugzilla.gnome.org/show_bug.cgi?id=592503
Simplify code to find the right theme to load and loading it by moving
all the loading code into a load_theme() helper function, and making
meta_load_theme() use that as it searches through the directories.
Look for old-version themes even when loading relative to the working
in debug mode.
Don't unnecessarily duplicate and then free info->theme_file and
info->theme_dir.
http://bugzilla.gnome.org/show_bug.cgi?id=592503
The change to using gconf_client_all_entries() in commit 2d57b1b4
meant that workspaces without a GConf key for their name were not
getting a name at all. Fix this by doing a post-processing loop
to set workspace names that were not otherwise set.
Alternate to patch from Tomas Frydrych
https://bugzilla.gnome.org/show_bug.cgi?id=613136
Since all windows are now MetaWindows as well as compositor
windows, there's no reason to keep a compositor-specific hash table
mapping from XID to MutterWindow.
This reduces complexity and removes a call to XQueryTree that could
potentially produce a BadWindow error if not error-trapped.
https://bugzilla.gnome.org/show_bug.cgi?id=613398
meta_compositor_process_event uses meta_error_trap_push/pop for
every event processed by meta_compositor_process_event which isn't needed
and can cause performance problems.
https://bugzilla.gnome.org/show_bug.cgi?id=613398
- Specify a minimum version of Clutter-1.2.0
- Remove conditionalizatin and always use Clutter-1.1 framebuffer
API rather than raw GL fbos
- Replace deprecated cogl_material/texture_unref() with
cogl_handle_unref()
https://bugzilla.gnome.org/show_bug.cgi?id=610862
The change to reduce GConf trips by using
gconf_client_all_entries() broke the fallback to builtin values
because update_binding() was no longer called for bindings not
found in GConf. Fix this by keeping track of the bindings we
find from GConf in a hash table, then looping through and setting
all the bindings at the end.
This also improves efficiency by avoiding a linear scan for each
binding in GConf.
https://bugzilla.gnome.org/show_bug.cgi?id=609710
When we are reading bindings initially, update_list_binding() needs
to be passed the correct "string list type" since we are calling
it with a list of strings instead of a list of GConfValue.
https://bugzilla.gnome.org/show_bug.cgi?id=609101
The older code relied on Clutter providing default texture coords for any
layers for which texture coords were not specified, which does not work as
of Clutter 1.1.6 (due to commit 8b950bdc87).
https://bugzilla.gnome.org/show_bug.cgi?id=609657
Treat the empty string the same as "disabled" for GConf keybinding
keys. gnome-keybinding-properties was changed to write disabled
keys as the empty string a year or so ago.
https://bugzilla.gnome.org/show_bug.cgi?id=559816
Whether Metacity honors a raise request from an application should
not be affected by the raise_on_click setting; remove a check that
seems to have been added in error.
https://bugzilla.gnome.org/show_bug.cgi?id=445447
When we are moving a window with a modal dialog to a different
workspace, meta_workspace_focus_default_window() can be called
with 'not_this_one' being the focused modal dialog.
Since the ancestor of that window is also being moved, we must
not focus it as an alternative to the current window; this will
cause windows to be moved back and Metacity to get into an
inconsistent confused state.
https://bugzilla.redhat.com/show_bug.cgi?id=237158https://bugzilla.gnome.org/show_bug.cgi?id=598995
We currently allow XRaiseWindow when the same application (defined
by the window group) is focused, but the kind of old applications
that XRaiseWindow are frequently not setting the window group.
Expand the check to allow the same X client (defined by the looking
at client ID) to raise windows above the focus window.
https://bugzilla.gnome.org/show_bug.cgi?id=567528
When started without session related command line parameters (e.g. from
gnome-session), metacity picks up client_id from the DESKTOP_AUTOSTART_ID
environment variable. Unfortunately, there is no way to distinguish if this was
passed from a config file, representing old saved session, or generated by
gnome-session, therefore load_state is attempted in each case. If the client_id
is generated, there will be no session file, and metacity will report a
warning.
Just remove the warning so that users won't always find a warning at the
start of their .xsession-errors.
https://bugzilla.gnome.org/show_bug.cgi?id=577576
The atk-bridge GTK+ module opens its own display; if we get an
XIOError on that display, we shouldn't abort with a meta_bug()
but just exit normally. Also fix a segfault if we got an XError
for that display.
https://bugzilla.gnome.org/show_bug.cgi?id=604319
Add a configure switch:
--with-libcanberra=[yes/no/auto]
(defaulting to auto); if libcanberra is not found or explicitly
disabled, then the default system bell will be used for the bell
sound and no switch workspace sound is played.
https://bugzilla.gnome.org/show_bug.cgi?id=609585
These sounds are good candidates for caching in the sound server, to
save a bit of CPU and make reaction faster. Hence, tell libcanberra to
cache them.
https://bugzilla.gnome.org/show_bug.cgi?id=609585
libcanberra generates specific tooltip popup sounds and for that
recognizes the tooltip windows by the GtkWindowTypeHint set for them.
This trivial patch simply sets the hint for the self-drawn tooltips
metacity uses.
https://bugzilla.gnome.org/show_bug.cgi?id=609585
Right now metacity issues only 1 bell event per second. This is
feels buggy when triggering multiple alarm sounds in a terminal.
This patch simple increases the limit to 1/100ms. 100ms is probably a
good choice since the HIG recommends that all user reaction should
happen within 100ms. With this applied pressing 'Left' in gnome-terminal
feels much more responsive.
https://bugzilla.redhat.com/show_bug.cgi?id=498608https://bugzilla.gnome.org/show_bug.cgi?id=609585
* src/core/bell.c: Don't force CA_PROP_CANBERRA_ENABLE to 1.
That was a misunderstanding on my part, and makes it impossible
to get rid of the bell.
svn path=/trunk/; revision=4165
https://bugzilla.gnome.org/show_bug.cgi?id=609585
* src/core/bell.c (meta_bell_set_audible): Now that we are
using libcanberra, don't tell the X server to play the system
bell internally.
svn path=/trunk/; revision=4141
https://bugzilla.gnome.org/show_bug.cgi?id=609585
metacity tries to do the right thing, by preloading all the relevant
directories before getting the keys one-by-one, but GConfClient isn't actually
smart enough to avoid server roundtrips in this case. That should certainly be
fixed in GConf.
In the meantime, here is a patch that reworks the metacity prefs initialization
to avoid roundtrips for individual keys anyway, by using
gconf_client_all_keys().
https://bugzilla.gnome.org/show_bug.cgi?id=574121https://bugzilla.gnome.org/show_bug.cgi?id=607746
The ICE connection is opened by libSM; we can't just close it when
we get an IOError on the ICE connection; instead call SmcCloseConnection()
and mark the connection as closed. This will prevent a segfault if we
exit out of the metacity main loop and get to meta_finalize().
https://bugzilla.gnome.org/show_bug.cgi?id=604867
It makes more sense because the grave key is close
to the tab and escape keys which the other cycle
keybindings use.
This always works better for gnome-shell, which
switchings between applications by default with alt-tab.
The user can now alt-tab to the application they want,
and then move their finger to the grave key to select
the window they want.
Windows demanding attention should never appear in the alt-tab list
unless they're of a type which might have appeared there anyway. This
solves a problem under AWN where docks which were marked as demanding
attention appeared in all alt-tab lists; they were irrelevant and it
was impossible to remove them from the lists.
svn path=/trunk/; revision=4123
Lines where x1==x2 or y1==y2 may have the second element null. Lines
where both are null, and the width is zero, are points. This speeds
things up surprisingly much.
svn path=/trunk/; revision=4119
(This is inspired by Metacity commit 45cbaa2 by Thomas Thurman, but
much simpler - the use of g_date_strftime("%Y") ended up being just
%d for all 90+ current translations)
meta_workspace_set_builtin_struts() is slightly expensive; it involves
discarding all our cached computed information about the layout of the
workspace. So catch calls to set_builtin_struts() that don't change
anything.
https://bugzilla.gnome.org/show_bug.cgi?id=609546
Since meta_workspace_invalidate_work_area() frees the edges
workspace->screen_edges and workspace->monitor_edges, we must clean up
our cached edge resistance data when the invalidate_work_area() is
called on the active workspace, or when the workspace changes.
Make the computation of the edge resistance data lazy so that it
will be recomputed the next time we try to access it.
meta_display_compute_resistance_and_snapping_edges() is made
private to edge-resistance.c
Invaliding the data when active workspace changes also will improve
correctness for edge resistance when the current workspace changes
during a grab operation. (Even with this fix we still don't try to
handle window positions changing during a grab operation; that can't
cause a crash since, unlike screen and monitor edges, the window edges
are freshly allocated, it will just cause slight oddness in that
corner case.)
Root cause tracked down due to much effort by Jon Nettleton.
https://bugzilla.gnome.org/show_bug.cgi?id=608800
