ClutterGridLayout is port of GtkGrid to a Clutter layout manager. All
the logic is taken from gtkgrid.c, so all the credits should go to
Matthias Clasen for writing this nice piece of code.
ClutterGridLayout supports adding children with it's own methods
GridLayout.attach() and GridLayout.attach_next_to() as well as
Actor.add_child() and friends. The latter adds children in a similar
fashion to ClutterBoxLayout
https://bugzilla.gnome.org/show_bug.cgi?id=677372
The plain C bytes array, while convenient from a C perspective, is not
well handled by language bindings: the length of the array is not
specified, and it's only just implied by the image data size, rowstride,
and pixel format.
GBytes is a read-only bytes buffer that has an implicit length; we can
use it as the storage medium so that language bindings can actually
function correctly.
This will ensure that we have a CoglContext, albeit the stub winsys one,
on Mac.
Tested-by: Roland Peffer <gdevel@clixxun.com>
Tested-by: Laszlo Pandy <laszlok2@gmail.com>
The ::stopped signal is emitted when the timeline has been completely
exhausted or when the timeline has been programmatically stopped by
using clutter_timeline_stop(); the notification at the end of the
timeline run allows to write handlers without having to check whether
the current repeat is the last one, like we are forced to do when using
the ::completed signal.
Based on the patch by: Jasper St. Pierre <jstpierre@mecheye.net>
https://bugzilla.gnome.org/show_bug.cgi?id=676854
Ensure that resizing transitions smoothly when switching between major
axis; the allocation aspect ratio is not important: it's the size of the
allocation that dictates the major axis.
It's similar to to the implicit animation API of ClutterActor and
compatible to deprecated API of ClutterBoxLayout and
ClutterTableLayout.
It adds :use-animations, :easing-mode, :easing-duration and
:easing-delay properties to control animations when allocation of a
child has changed. Layout manager implementers should call
use_animations = clutter_layout_manager_get_easing_state (manager,
&mode,
&duration,
&delay);
from the allocate() virtual function to access these values.
https://bugzilla.gnome.org/show_bug.cgi?id=676827
The z coordinate of the origin should be checked against the same
coordinate of the vertex behind it. Given that most actors are flat
surfaces, this check should always succeed.
https://bugzilla.gnome.org/show_bug.cgi?id=675396
Instead of going through clutter_event_get_state() and checking if the
modifier mask is set, we can provide simple convenience functions to do
it for us.
When creating a FlowLayout container, setting a specific size on it, and
adding a child to it, as per the attached testcase, it crashes. The line
on the backtrace doesn't really make sense, but from looking over it, it
appears that it's probably because priv->line_natural is NULL. The
attached patch makes it so in this case, priv->line_natural is
allocated.
https://bugzilla.gnome.org/show_bug.cgi?id=676068
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
-Don't include unistd.h and stdint.h unconditionally as not all Windows
compilers have them around.
-Only include cogl/cogl-xlib.h when it is really supported by Cogl and GDK.
-sys/ioctl.h is not available on Windows (MinGW/MSVC).
-Correct the call to cogl_renderer_set_winsys_id:
(backend_cogl->cogl_renderer, COGL_WINSYS_ID_WGL) ->
(renderer, COGL_WINSYS_ID_WGL)
The property uses an array with the following CSS style syntax
[ top, right, bottom, left ] or
[ top, left/right, bottom ] or
[ top/bottom, left/right ] or
[ top/right/bottom/left ]
https://bugzilla.gnome.org/show_bug.cgi?id=676367
Passing a NULL buffer to clutter_text_set_text() does not behave the same
way as passing an empty string "" (as specified in the documentation).
This was working as expected previously, but somehow the behaviour changed
at some point and created 2 new issues:
- Passing a NULL pointer will not reset the string
- If the ClutterText is editable, it will segfault in strcmp
Validations have been added to prevent this.
https://bugzilla.gnome.org/show_bug.cgi?id=675890
This fixes drop_action_unregister() to not call g_object_get_data()
on priv->stage if not yet resolved. This can happen if the action's
actor was destroyed before ever being mapped.
When the transition was removed from the scroll-actor manually,
to cancel a not-finished animation, the transition struct member
wasn't reset to NULL.
This fixes this problem, and removes the need for the struct member
to be reset manually when animation has completed.
https://bugzilla.gnome.org/show_bug.cgi?id=676334
When setting up the transition manually by calling
clutter_keyframe_transition_set_key_frame (transition, n, keys);
clutter_keyframe_transition_set_values (transition, n, values);
clutter_keyframe_transition_set_modes (transition, n, modes);
the frame doesn't have a valid interval when calling set_keys(), so we
need to check its existence and create it if necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=676031
Chaining up to the parent's implementation of pick() is not enough: we
need to paint our children explicitly because of the compatibility mode
checks we use to avoid breaking custom containers.
https://bugzilla.gnome.org/show_bug.cgi?id=676088
We need to clip the children during picking as well as we do when
painting, to avoid reactive children outside of the visible area
receiving events.
This also allows us to refactor some common code into proper functions.
-Add configuration in Clutter projects to add option to build Clutter with
the GDK3 backend in addition to the Win32 backend
-Add another preconfigured clutter-config.h.win32_GDK which contains
backend configs for both GDK3 and Win32 windowing and input.
When asking for the preferred width and height of an actor, in case
only one of either the minimum or the natural width is set, the margin
offsets should also be applied.
When getting touch events, the device manager would try
to pass an invalid device to translate_axes().
clutter_event_set_device() will only update event->touch.device
for touch events, not event->motion.device, as used.
Fixes Totem crashing on mouse motion/button press when using
a touchpad.
https://bugzilla.gnome.org/show_bug.cgi?id=675371
The drop-cancel signal allows the drop action to cleanup its
state if the can-drop signal is refused. This is especially
useful if the drop action (or its target actor) is managing
any drop target animations.
https://bugzilla.gnome.org/show_bug.cgi?id=675336
The example code that is meant to be XIncluded into the API reference
should not be part of the interactive test suite: it's code that it is
meant to be used as a reference implementation - whereas the interactive
test suite should be allowed to be lean and test behaviour even in nasty
ways. In short: the test suite should not be the place where we show off
idiomatic code for educational purposes.
The introspection scanner has become slightly more annoying, in the hope
that people start fixing their annotations. As it turns out, it was the
right move.
It's time. Now that we have clutter_actor_allocate() respecting the
easing state of an actor, and that the LayoutManager animation virtual
functions have been deprecated, we can put ClutterAlpha on the chopping
block, and be done with it, once and for all.
So long, ClutterAlpha; and thanks for all the fish.
This semi-aborted API was broken for various reasons:
- it strongly depended on ClutterAlpha, a class we're trying to
deprecate;
- it requires a lot of boilerplate and copy-and-paste code;
- it requires a full relayout of the actor tree for something
that ought to be automatically handled by ClutterActor.
Now that clutter_actor_allocate() handles transitions using the easing
state of the actor, we can deprecate the LayoutManager API for the 1.x
series, and remove it for the 2.x series.
BoxLayout will use the easing state of the children it's allocating; the
current API is re-implemented in terms of an implicit easing state
forced on each child prior to allocating it.
Calling clutter_actor_allocate() should transition between the current
allocation and the new allocation, by using the defined implementation
of the easing state.
This means that:
clutter_actor_save_easing_state (actor);
clutter_actor_allocate (actor, &new_alloc, flags);
clutter_actor_restore_easing_state (actor);
will cause "actor" to transition between the current allocation and the
desired new allocation.
The trick is to ensure that this happens without invalidating the
entire actor tree, but only the portion of the tree that has the
transitioned actor as the local root. For this reason, we just call the
allocate() implementation from within the transition frame advancement,
without invalidating flags: the actor, after all, *has* a valid
allocation for the duration of the transition.
The :x-expand and :y-expand flags on ClutterActor are used to signal
that an actor should expand horizontally and/or vertically - i.e. that
its parent's layout management policy should try to assign extra space
to the actor when allocating it.
The expand flags are automatic: when set on a leaf node in the actor
tree, they will bubble up through the parent and grandparents up to the
top level actor; during allocation, the actors with children will lazily
compute whether their children needs to expand.
The TransitionGroup class is a logical container for running multiple
transitions.
TransitionGroup is not a Score: it is a Transition that advances each
Transition it contains using the delta between frames, and ensures that
all transitions are in a consistent state; these transitions are not
advanced by the master clock.
There are cases when we want to advance a timeline from another time
source. We cannot use _clutter_timeline_do_tick() directly, as that
assumes that the timeline is already playing, so we'll need to create a
wrapper that toggles the playing flag around it.
Given that we can create a ClutterInterval without an initial and final
values using g_object_new(), it stands to reason that we ought to be
able to create an instance when passing NULL GValue pointers to the
new_with_values() constructor as well.
We tend to use float comparison for structured data types like Vertex,
Point, and Size; we should take into consideration fluctuations in the
floating point representation as well.
Instead of a single new() constructor that both allocates and
initializes, split the allocation and initialization into two separate
functions for types that are typically used on the stack, and rarely
allocated on the heap, like ClutterPoint and friends.
This is also applied retroactively to ClutterActorBox and ClutterVertex,
given that the same considerations on usage apply to them as well; we
can add a return value to clutter_actor_box_init() and
clutter_vertex_init() in an ABI-compatible way, so that
clutter_actor_box_new() and clutter_vertex_new() can be effectively
reimplemented as "init (alloc ())".
Using a compound type property for position and size has various
advantages: it reduces the amount of checks; it reduces the amount
of notify signals to connect to; it reduces the amount of transitions
generated.
The ClutterCanvas content implementation should be used instead, to
avoid stringing along the ClutterTexture API and implementation.
This change requires some minor surgery, as the deprecated section
already contains an header for the previously deprecated methods; plus,
we don't want to deprecate clutter_cairo_set_source_color(). This means
creating a new header to be used for Cairo-related API.