When the X11 display is actually XWayland there's no point to delay the
compositor selection, given that mutter itself is the compositor and
doing this may cause the first X11 client that starts not to receive the
right information (and in some cases misbehave).
Since some toolkits are not handling the compositor selection changes
properly at later times, let's make their life easier by just
initializing the selection as early as the other X11 properties, given
that in this case there's nothing to replace.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2472
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2970>
Since c390f70edc ("backend: Set up and use ownership chains")
the type of the ClutterInputDevice object's "meta-input-settings-xdevice"
data is `DeviceHandle`, but that commit failed to change the one place
where the object data is queried. As a consequence, that part still
considers it to be an `XDevice`, so everything that uses the return
value of `device_ensure_xdevice()` works with invalid data. Furthermore,
`device_handle_free()` incorrectly uses the `user_data` as the argument
for `XCloseDevice()` leading to a double free.
Fixes: c390f70edc ("backend: Set up and use ownership chains")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2995>
Otherwise binding new wl_output's might try to send enter to the
destroyed resource. Fixes the following crash:
#0 wl_resource_get_client at ../src/wayland-server.c:801
#1 handle_output_bound at ../src/wayland/meta-wayland-surface.c:1287
#3 signal_emit_unlocked_R.isra.0 at ../gobject/gsignal.c:3812
#6 ffi_call_unix64 at ../src/x86/unix64.S:104
#7 ffi_call_int at ../src/x86/ffi64.c:673
#8 ffi_call at ../src/x86/ffi64.c:710
#9 wl_closure_invoke at ../src/connection.c:1025
#10 wl_client_connection_data at ../src/wayland-server.c:438
#11 wl_event_loop_dispatch at ../src/event-loop.c:1027
#12 wayland_event_source_dispatch at ../src/wayland/meta-wayland.c:125
#15 g_main_context_iterate.isra.0 at ../glib/gmain.c:4276
#17 meta_context_run_main_loop at ../src/core/meta-context.c:482
Related: https://bugzilla.redhat.com/show_bug.cgi?id=2196527
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2992>
Otherwise drivers would be free to alter the buffer content. While no
driver is known to do so, it's probably good to make things explicit.
See also `import_simple_dmabuf()` in Weston.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2990>
The DMA buffer paths vs MemFd paths differ slightly in when content is
recorded. This was in some places done by trying to record but bail if
the dequeued buffer had the wrong type. This is problematic for two
reasons: we'd update the timestamp even if we refused to record, making
the follow-up attempt fail, and we'd dequeue and queue buffers that
didn't get any content, meaning the receiving end would see empty
buffers potentially with only cursor updates.
Fix this by keeping track if a stream is DMA buffer able or not, and
don't attempt to record at all in the places we would previously require
DMA buffers. This avoids both issues: we don't dequeue/queue pw_buffers
that we refuse to record to, and we won't update the recorded timestamp
when we didn't intend to record to begin with.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2783
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2987>
Hides libdisplay-info under a build time default-off flag,
provides provision to parse essential edid parameters with
APIs provided by libdisplay-info. This implementaion increases
readibility, avoids code duplication and decreases complexity
of edid parsing.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2642>
We are attempting to show windows that do not yet have a
surface/buffer, this makes GNOME Shell avoid transitions
for these windows.
Since on Wayland X11 windows are also Wayland surfaces,
this check is also valid for these, and is thus made more
generic to also cater for these windows.
Eventually, meta_window_update_visibility() is called
when the surface gets its buffer, so the window can be
neatly animated.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2611
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2975>
This ATM triggers missed .commit events for the window in question,
to be addressed in Xwayland. Since the test does not seem to specifically
rely on this window being CSD, make it a regular window instead.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2975>
Going for the default GL renderer is known to trigger rendering
artifacts using the NVidia proprietary driver. Since we don't have
too many expectatives about frames being flashy (not to the point
of mandating GL), resort to the cairo renderer in the mean time.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2976>
Just like the HDR Metadata property the Colorspace property values only
indicate that the display driver supports signaling certain colorimetry.
It does not indidcate that the sink actually supports processing the
colorimetry. For this we have to look up the colorimetry support in the
EDID.
The default colorimetry is always supported. If we want bt.2020 we might
get either the RGB or YCC variant even if we ask for the RGB variant but
there is nothing we can do about it so let's just pretend it's a driver
issue.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2919>
If the used EGL backend supports it. In practice this should currently
only affect the nested backend.
Enabling modifiers can help with app development. An example is
`weston-simple-dmabuf-v4l`, which requires the linear modifier to be
available.
Note that Weston behaves similar already.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2972>
This will be used to extract the resolution and refresh rate from
strings like "1920x1080@60.0" or "1280x720". This aims to replace the
use of the locale dependent sscanf() function.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2902>
This function gets called when a surface state transaction is applied.
Applying a transaction can get delayed, so the Wayland resource may have
already been destroyed when we get here. In that case we cannot send
events, so there's nothing to do.
v2:
* Drop code comment, expand commit log instead. (Jonas Ådahl)
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2737
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2967>
Otherwise we'll have a cursor sprite backed by a surface that no longer
exist. This usually doesn't happen, but can happen in rare situations
related to pointer capability changes Wayland client cursor changes and
hotplugs.
Fixes the following crash:
#0 meta_wayland_buffer_get_resource() at ../src/wayland/meta-wayland-buffer.c:128
#1 realize_cursor_sprite_from_wl_buffer_for_gpu() at ../src/backends/native/meta-cursor-renderer-native.c:1649
#2 realize_cursor_sprite_for_gpu() at ../src/backends/native/meta-cursor-renderer-native.c:1869
#3 realize_cursor_sprite() at ../src/backends/native/meta-cursor-renderer-native.c:1887
#4 meta_cursor_renderer_native_update_cursor() at ../src/backends/native/meta-cursor-renderer-native.c:1100
#5 meta_cursor_renderer_update_cursor() at ../src/backends/meta-cursor-renderer.c:414
#6 meta_cursor_renderer_force_update() at ../src/backends/meta-cursor-renderer.c:449
#7 update_cursors() at ../src/backends/meta-backend.c:328
#8 meta_backend_monitors_changed() at ../src/backends/meta-backend.c:338
#9 meta_monitor_manager_notify_monitors_changed() at ../src/backends/meta-monitor-manager.c:3590
#10 meta_monitor_manager_rebuild() at ../src/backends/meta-monitor-manager.c:3678
#11 meta_monitor_manager_native_apply_monitors_config() at ../src/backends/native/meta-monitor-manager-native.c:343
#12 meta_monitor_manager_apply_monitors_config() at ../src/backends/meta-monitor-manager.c:706
#13 meta_monitor_manager_ensure_configured() at ../src/backends/meta-monitor-manager.c:779
#14 meta_monitor_manager_reconfigure() at ../src/backends/meta-monitor-manager.c:3738
#15 meta_monitor_manager_reload() at ../src/backends/meta-monitor-manager.c:3745
or the following on gnome-43:
#0 meta_wayland_surface_get_buffer at ../src/wayland/meta-wayland-surface.c:441
#1 meta_cursor_sprite_wayland_get_buffer at ../src/wayland/meta-cursor-sprite-wayland.c:83
#2 realize_cursor_sprite_from_wl_buffer_for_gpu at ../src/backends/native/meta-cursor-renderer-native.c:1612
#3 realize_cursor_sprite_for_gpu at ../src/backends/native/meta-cursor-renderer-native.c:1836
#4 realize_cursor_sprite at ../src/backends/native/meta-cursor-renderer-native.c:1854
#5 meta_cursor_renderer_native_update_cursor at ../src/backends/native/meta-cursor-renderer-native.c:1087
#6 meta_cursor_renderer_update_cursor at ../src/backends/meta-cursor-renderer.c:413
#7 meta_cursor_renderer_force_update at ../src/backends/meta-cursor-renderer.c:448
#8 update_cursors at ../src/backends/meta-backend.c:344
#9 meta_backend_monitors_changed at ../src/backends/meta-backend.c:354
Related: https://bugzilla.redhat.com/show_bug.cgi?id=2185113
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2968>
Under certain conditions a stage-view update does not trigger a kms
update.
In such cases we still want the next update to run within the same
refresh cycle, as otherwise we'd waste the remaining time in the
current one.
At the same time we currently use the `after-update` signal for Wayland
frame events, which again may result in more "empty" updates -
creating an unthrottled feedback loop. This can trigger excessive
load both in the compositor as well as in clients.
Introduce a new GSource that is dispatched once per refresh cycle at
maximum per stage view and use it to emit frame events. Do so by
computing the time from when on we can be sure that an update resulting
from a client commit would certainly get scheduled to the next refresh
cycle.
Note: this only works on the native backend. Given that chances are
small that we hit the corresponding issue on e.g. the nested backend,
stick to the previous behavior there for now.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2823>
When selecting the default focus window, is_focusable() was not
considering the new conditions for whether a window should be shown or
hidden that were added to meta_window_should_be_showing() in 39942974.
As a result the default focus window could end up a window already
hidden or hidden once meta_window_flush_calc_showing() is called by
meta_window_focus() when focusing the default window. This would cause
meta_window_focus() to fail, which is an issue if it prevents us from
unfocusing a window when it is getting unmanaged.
Fixes: 399429742 ("x11: Integrate frames client into Mutter")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2644
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2962>
create_and_send_dnd_offer() sets the compositor of the offer to the one
from the MetaWaylandDataSource. This then later gets used in
display_from_offer() when trying to get the context from the compositor.
meta_wayland_data_source_xwayland_new() however was not setting the
compositor, so this was causing crashes when dragging things from X11
windows on Wayland.
Fixes: 2731f0cda ("wayland: Setup and use ownership chains")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2723
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2956>
This ensures that applications are notified when a drag gets cancelled
because the user dropped or press ESC while in overview.
This fixes an issue with Chromium on Wayland refusing to acknowledge
wl_pointer::enter events after accidentally dropping a
Chromium-originated object in GNOME Shell overview.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2953>
Ensure the frame window is created at the right fullscreen state
before showing it and assigning it to the client window.
A peculiarity of this property on frame windows is that it is
typically single-handedly updated from the Mutter side, in synchronization
with client window state. It can only differ during creation, since
GTK still likes to apply its own state.
Also, the only relevant property seems to be _NET_WM_STATE_FULLSCREEN,
since the others are less relevant to the role of the frames client,
and get applied to the MetaWindow as a whole, instead.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2712
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2961>
After this got changed from gdk_x11_get_xatom_name() to XGetAtomName(),
this no longer returns a const char* and it now also needs to be freed.
Fixes: e66f4396e ("x11: Avoid GDK API in X11 selections")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2957>
This was pointlessly being converted between atom and string and back,
which with the switch from gdk_x11_get_xatom_name() to XGetAtomName()
also introduced a leak for every XGetAtomName() call.
Fixes: e66f4396e ("x11: Avoid GDK API in X11 selections")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2957>
The private format and type member variables were not being used by any
of the callers, so they can simply be removed. This also fixes a leak of
type which was introduced when switching from gdk_x11_get_xatom_name()
to XGetAtomName().
Fixes: e66f4396e ("x11: Avoid GDK API in X11 selections")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2957>
After this got changed from gdk_x11_get_xatom_name() to XGetAtomName(),
this no longer returns a const char* and it now also needs to be freed.
Fixes: 014cde646 ("wayland: Do not use GDK functions on XDnD implementation")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2957>
We might end up trying to apply a pending state late if it was delayed
by DMA buffers not being ready. Trying to discard the pending state from
the transaction when dismissing is hard, because we might be applying a
chain of transactions that would disqualify subsequent transactions if a
former one dismisses the popup, so lets just drop what the apply would
otherwise do, if we're not going to use it anyway.
This fixes the following crash:
0) meta_wayland_surface_get_window (surface=0x0)
1) meta_wayland_xdg_popup_apply_state (surface_role=0xf5ee80, pending=0xf662a0)
2) meta_wayland_surface_role_apply_state (surface_role=0xf5ee80, pending=0xf662a0)
3) meta_wayland_surface_apply_state (surface=0xf5e640, state=0xf662a0)
4) meta_wayland_transaction_apply (transaction=0xf56170, first_candidate=0x7fffffffcee8)
5) meta_wayland_transaction_maybe_apply_one (transaction=0xf56170, first_candidate=0x7fffffffcee8)
6) meta_wayland_transaction_maybe_apply (transaction=0xf56170)
7) meta_wayland_transaction_dma_buf_dispatch (buffer=0xf448a0, user_data=0xf56200)
8) meta_wayland_dma_buf_source_dispatch (base=0xf5f140, callback=0x0, user_data=0x0)
9) g_main_dispatch (context=0x41baa0)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2940>
If the popup was dismissed (i.e. has no MetaWindow anymore), it'll also
have no parent surface. With no parent surface, we'd try to fetch a
transaction from NULL and crash, but if we don't try if we were
dismissed, we won't reach here anyway.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2940>
With the frames client, we do no longer handle events for the
frame window inside Mutter. This means we do not get events
"for free" to handle focus on a just clicked frame window.
This results in a background window not ending up focused if
clicked on its frame.
In order to fix this, make the passive button grab extend to
the frame window if a window has one. This brings back
focus-on-click behavior, while treating windows further as
a unitary surface.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2727
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2954>
Pass the timestamp of the frame as the target timestamp of the
record. This makes the rudimentary frame throttling mechanism
inside MetaScreenCastStreamSrc work with the timing variability
that dynamic dispatch times introduced.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2804>
Instead of always, unconditionally scheduling an idle callback for
frame recording, try to record a DMA-BUF only frame, and only if
that's not possible, schedule the idle callback.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2804>
When a stream source subclass asks for a DMA-BUF only frame record,
it is legitimate to return FALSE in do_record_frame() - meaning that
a frame was not recorded - but not return an error - meaning nothing
actually failed.
This avoids spamming the journal with warnings on a legitimate case.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2804>
Add meta_screen_cast_stream_src_maybe_record_frame_with_timestamp()
which operates on arbitrary timestamps; and make the current function
meta_screen_cast_stream_src_maybe_record_frame() just call into the
new variant, passing g_get_monotonic_time() as the timestamp.
This will be useful later we start using the target timestamp of the
frame for screencasting.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2804>
This change will export the damaged regions (when available) out
to the pipewire client. This change is currently specific to
virtual streams only (where I was able to test the change) and
maintains the current behavior for other screencast stream types.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2775>
This change allows clipped redraws for offscreen. The net
effect of this change is to preserve the original redraw clip when
possible (rather than overwriting it with the full view redraw) in
the paint context.
This eventually helps in retrieving the fine grained updated regions of
the frame since last redraw and sending it to the pipewire client
(as shown in a subsquent CL).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2775>
Returning FALSE does not indicate an error, but a valid backlight
value of 0. Consumers expect a negative value to indicate no
backlight support, so return -1 in case of error, just like we
already do for invalid values.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2947>
The window tracker is filtering XEvents manually as it only requires a
subset of the ones that Gdk listens to in the root window, and this is
nice, but we were restricting the set a bit too much because due to this
we were not notified when an xsettings manager was available, and thus
in case gsd-xsettings was launched after meta-window-tracker (a normal
scenario under X11), no xsetting was actually applied to the decoration
windows.
As per this, the default settings were used for everything and never
updated, until a restart of the window-tracker.
In order to be able to monitor the XSettings changes at startup, we also
need to select the StructureNotifyMask as gtk always do by default.
See also:
https://gitlab.gnome.org/GNOME/gtk/-/blob/4.11.1/gdk/x11/gdkscreen-x11.c#L947-950Fixes: #2580
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2948>
The anchor position calculations are somewhat unnecessarily complex
based on root coordinates of pointer and frame positions. This requires
tracking both things, and we don't always get it quite right with the
latter (e.g. window repositions, resizes or overshrinks, leaving the
anchor position visually outside the window).
In order to improve this, capture the window-relative coordinates
when starting the window drag, and ensure the window is always repositioned
in that position, relative to its current size.
This avoids these glitches when unmaximizing a window (e.g. dragged from
the bottom through super+button1 press), or moving windows between monitors
with different scales.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2730
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2942>
Since we only track changes to window_drag->anchor_window_pos
during move operations through on_grab_window_size_changed(), this
rectangle is in essence the same than window_drag->initial_window_pos
all the time. Just use that and move away from the anchor_window_pos
rectangle.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2942>
scan_visible_region() scans through each value of a uint8_t array and checks
whether that value is 255. Right now it always checks one value too much
though, resulting in a buffer overflow. Fix that by checking the array
bounds before actually accessing the array.
Found by running gnome-shell with address sanitizer and starting
GIMP.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2856>
Both GRAB_OP_KEYBOARD_MOVING and GRAB_OP_KEYBOARD_RESIZING_* are
defined as GRAB_OP_WINDOW_BASE with FLAG_KEYBOARD set, but the
latter have additional bits set to indicate the direction.
That is, the GRAB_OP_KEYBOARD_MOVING bitmask cannot be used to
differentiate between move- and resize operations. Instead,
check that no direction bits are set.
https://gitlab.gnome.org/GNOME/mutter/-/issues/2684
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2908>
The unknown color space's only purpose is to signal that the current KMS
state has a unknown color space set. It is not one of the color spaces
that can be set. We already only try to set a color space if the default
color space is supported so we should use the default color space as a
fallback instead of the unknown color space.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2693
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2915>
With the move away from GTK3, and the indirect dependency on GTK4
grown in the GNOME Shell side, we've indirectly gotten a small sneaky
behavioral change: The GTK4 library will, right on dlopen, get
DESKTOP_AUTOSTART_ID for itself and delete it from the environment.
This happens before our own X11 session management code is
initialized, which confuses the hell out of it, into thinking
initialization is actually shutdown, gnome-session does not follow
along with this request, which leaves GNOME Shell into a confused
startup state where it never calls SmcSaveYourselfDone() and grinds
startup to a halt until gnome-session decides to move things forward.
In order to fix this, get the DESKTOP_AUTOSTART_ID before we lend
control to GNOME Shell bits and GTK4 is possibly initialized, and
feed it directly to our X11 session manager bits.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2906>
We might get told to restore the old monitor configuration by the
monitor configuration prompt, in case the user pressed "revert" or
equivalent. This might be in response to a button press, and those
happen during frame clock dispatch. If we would restore an old
configuration during dispatch, it means we would reconfigure the
monitors including their stage views while dispatching, which means we'd
destroy the frame clock while it's dispatching.
Doing that causes problems, as the frame clock isn't expecting to be
destroyed mid-function. Specifically,
We'd enter
clutter_frame_clock_dispatch (clutter-frame-clock.c:811)
frame_clock_source_dispatch (clutter-frame-clock.c:839)
g_main_dispatch (gmain.c:3454)
g_main_context_dispatch (gmain.c:4172)
g_main_context_iterate.constprop.0 (gmain.c:4248)
g_main_loop_run (gmain.c:4448)
meta_context_run_main_loop (meta-context.c:482)
main (main.c:663)
which would first call
_clutter_process_event (clutter-main.c:920)
_clutter_stage_process_queued_events (clutter-stage.c:757)
handle_frame_clock_before_frame (clutter-stage-view.c:1150)
which would emit e.g. a button event all the way to a button press
handler, which would e.g. deny the new configuration:
restore_previous_config (meta-monitor-manager.c:1931)
confirm_configuration (meta-monitor-manager.c:2866)
meta_monitor_manager_confirm_configuration (meta-monitor-manager.c:2880)
meta_plugin_complete_display_change (meta-plugin.c:172)
That would then regenerate the monitor configuration and stage view
layout, which would destroy the old stage view and frame clock.
meta_stage_native_rebuild_views (meta-stage-native.c:68)
meta_backend_native_update_screen_size (meta-backend-native.c:457)
meta_backend_sync_screen_size (meta-backend.c:266)
meta_backend_monitors_changed (meta-backend.c:337)
meta_monitor_manager_notify_monitors_changed (meta-monitor-manager.c:3595)
meta_monitor_manager_rebuild (meta-monitor-manager.c:3683)
meta_monitor_manager_native_apply_monitors_config (meta-monitor-manager-native.c:343)
meta_monitor_manager_apply_monitors_config (meta-monitor-manager.c:704)
After returning back to the original clutter_frame_clock_dispatch()
frame, various state in the frame clock will be gone and we'd crash.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2901>
Commit 7e9d9c7eb9 added new API to replace GTK for accelerator
parsing.
Unfortunately there is another case in gnome-shell, where we have
to get the label from the logical binding name rather than the
modifier+keysym combination.
Add another small method to cover that use case.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2899>
Normally, mutter implicitly allows a window being shown to take
focus. This is normally desired, except it steals input from
GNOME Shell self. Avoid focusing the just shown window in those
situations.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2878>
When a X11 application is started, typically what happens is:
- A startup notification token is created, with a _TIME%d suffix
- The application being spawned receives it through the environment
- (dbus piping, maybe)
- The application replies the startup notification token, and
fetches the timestamp from it
- The application makes a _NET_ACTIVE_WINDOW client message request
with this timestamp
- Mutter handles this client request and activates/focuses the window
Prevent this last step if windows are not interactable (e.g. there is
a compositor grab) and ignore the focus request. This specifically
applies to X11 clients requesting focus themselves, and unlike previous
approaches, doesn't try to prevent focus changes that do come through
interaction with Mutter/GNOME Shell.
This should only break if applications do not observe _NET_ACTIVE_WINDOW
and perform XSetInputFocus on themselves, but in that case the X11
keyboard focus is stolen from our hands already.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2878>
This is the mask that lets us receive among other events the rather
important CreateNotify, that tells us about new winows. This has went by
rather unnoticed except for cases where multiple windows show up very
quickly directly after the frames client spawned, because the drag icon
surface cache eventually already did select that particular mask.
Make things more reliably by explicitly setting the mask for the events
we rely on to function.
This fixes flaky stacking tests that map multiple X11 windows in a row.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2894>
2d8fa26c8e ("core: Pass "frame action" grab operations as an
"unconstrained" grab op") changed the behaviour to treat non-grab
related window moving that has the "user action" flag set to still apply
the "constrain_titlebar_visible" constraint.
The fact that it wasn't applied before was relied upon by some
extensions. While it should arguably exist a better API that for such
extensions to use that have a bit more predictable behavior, until that
is so, restore the old semantics.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2891>
Linear sampling can influence the value of surrounding pixels beyond
the scaled framebuffer extents calculated during stage view rendering,
resulting in flickering graphical artifacts due to unaccounted pixel
changes. This is exhibited in xfreerdp and wlfreerdp at 150% display
scaling.
Fix this by ensuring that all pixels that may be affected by linear
scaling is included in the framebuffer redraw clip by padding the actor
redraw clip.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2771>
We have the drm/InfoFrame encoding and our MetaOutputHdrMetadata
encoding. Check that we can correctly convert between each other by
doing a encode/decode and decode/encode roundtrip and then checking for
equality.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2879>
The existence of the KMS property just means that we can send an
InfoFrame but we also have to make sure the sink actually supports the
metadata type 1 and the selected transfer function.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2879>
Allows to prepare KMS updates to set the color space and HDR Static
Metadata on the output.
For some reason we need ALLOW_MODESET on commits which change the HDR
Static Metadata InfoFrame on AMDGPU. There is no technical reason why
one needs to mode set to send an InfoFrame and the driver should just
manage without ALLOW_MODESET. Until this is resolved in the kernel we
just prepare KMS updates which might mode set.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2879>
The HDR Static Metadata InfoFrame contents are described in CTA-861.3
and the kernel maintains a representation of that in `struct
hdr_metadata_infoframe` in `include/uapi/drm/drm_mode.h`.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2879>
The Colorspace property informs the display about the colorimetry of the
content. Only variants supported by the sink are exposed in the
property. The strings representing the color spaces are undocumented but
can be found in the `hdmi_colorspaces` list in
`drivers/gpu/drm/drm_connector.c` in the Linux kernel (v 6.2).
The HDR_OUTPUT_METADATA property is a blob with the InfoFrame content.
We have to query support for the different values in the struct from the
EDID/DisplayID ourselfs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2879>
This adds a new 'experimental-hdr' string property to the MonitorManager
which can be changed from looking glass.
Currently when the string equals 'on', HDR (PQ, Rec2020) will be enabled
on all monitors which support it. In the future support for more
transfer functions and color spaces as well as HDR metadata can be
added.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2879>
The color space and HDR metadata are eventually sent as metadata to the
display. The color space informs the display of the colorimetry of the
frames we produce, the HDR metadata informs the display of the transfer
function and additional mastering display colorimetry and luminance to
guide tone and gamut mapping.
The only color spaces we support right now are the default color space
and Rec bt.2020 which is typically used for HDR content. Other supported
color spaces can be added when needed.
The default color space corresponds to whatever colorimetry the display
has when no further changes are made to the calibration of the display.
The colorimetry is communicated to sources via EDID/DisplayID.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2879>
A Wayland client repeatedly requesting activation of its surface using
the xdg-activation protocol would make mutter constantly update the
cursor.
To avoid needlessly updating the cursor back and forth between busy and
default, add a timeout to delay the update.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2849>
When a client (either Wayland or X11) is started, the window activation
will update the cursor to the "busy" cursor.
Mutter will then set the X11 cursor on the X11 root window to match that
so that X11 applications which do not explicitly set a cursor inherit
from that default (busy) cursor.
Updating the X11 cursor too often can hammer the X11 connection and
cause a deadlock with Xwayland.
Reload the X11 cursor in a later handler to avoid that issue.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2849>
We relied on them being valid longer to keep track of used GPUs. If we
don't have the CRTC (or output) we don't have a way to fetch the pointer
to the MetaGpu that drives the associated monitor.
This avoids a crash when trying to fetch said pointer from what would be
the NULL MetaCrtc pointer.
Fixes: 08593ea872 ("onscreen/native: Hold ref to the output and CRTC until detached")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2667
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2887>
Ensure we preserve the fast zero-copy paths in Xwayland fullscreen
windows, instead of maybe rendering the client surface on top of the
frame surface, and providing the latter to the compositor.
To achieve this, additionally synchronize frame state when
recalculating features (e.g. after fullscreen/unfullscreen), and
account for this new condition when creating or destroying frames.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2797>
We were relying on gdk_cairo_region() to convert a cairo_region_t
into a path ready to fill/stroke in a cairo_t. This is a small
and detached helper that we can do ourselves, so put it together
with all other region helper functions.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2864>
Do the few remaining things that GDK is doing for us:
- Open and close the X11 Display
- Set up a GSource on the Display FD to handle events
- Allocate and free the content of XGenericEventCookie,
to "unroll" the few XInput2 events that Mutter still
does handle.
And remove the GdkDisplay we've so long relied on.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2864>
From reading the comment in the top of the file, not for the first
time. Keep our own error handler and maintain our own list of
failable x11 sequences in MetaX11Display, so we can move away from
GTK's.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2864>
These are done on the backend X11 connection, so it is unclear
what is the interplay through the borrowed global XSetErrorHandler()
that triggers issues for us here.
Anyways, better to be explicit, and use error traps the MetaBackendX11
style, in coherence with the rest of the things happening in that
display.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2864>
When an onscreen is "attached" it means it has an active CRTC and output
it interacts with, e.g. listens to configuration changes to update gamma
and privacy screen state.
MetaOutput and MetaCrtc are rather short lived objects meaning they are
disposed of and regenerated each time the compositor reloads monitor
resources, and while MetaOutput are indirectly kept alive due to the
MetaMonitor holding on to them during reloading, the same does not apply
to MetaCrtc, so to avoid trying to disconnect our signals from
disappeared outputs and CRTCs when we dispatch, hold our own references
to these objects.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2665
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2885>
On exit, explicitly detach the onscreens during disposal. This means no
functional changes, but allows for doing more cleanup on detach that
doesn't need to be repeated on disposal.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2885>
As implemented in colord 1.4.6, cd_icc_load_handle() has three possible
results:
1. success, taking ownership of the profile;
2. failure because cmsGetProfileContextID returns NULL, *not* taking
ownership of the profile;
3. failure in cd_icc_load(), taking ownership of the profile.
The previous commit ensures that we are not in case 2.
In case 3 where cd_icc_load() fails, ownership was already given to
the colord CdIcc object, so it will be freed when the g_autoptr unrefs
the CdIcc, and we must not free it again: that would be a double-free,
potentially resulting in memory corruption.
Resolves: https://gitlab.gnome.org/GNOME/mutter/-/issues/2659
Signed-off-by: Simon McVittie <smcv@debian.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2877>
We want to avoid using too high scales too easily, which started to
happen 2f1dd049bf ("monitor-manager: Rework default scale factor
selection"). Instead of using the closest non-fractional scale, which
effectively is what we'd do, only round upwards if we're closer than
0.25 (25%).
Since there are some wiggle room for scales to make the logical
resolution on the integer pixel grid, make sure to compensate. This
compensation is done by adding an extra 0.2 to scale difference.
For example the following fractional scales will get these corresponding
integer scales:
* 1.25 -> 1.0
* 1.5 -> 1.0
* 1.75 -> 2.0
* 2.0 -> 2.0
* 2.50 -> 2.0
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2880>
Instead of testing headless start using the dummy backend, do so with
the real native backend, and use the drm-mock library instead to emulate
monitors being disconnected at startup.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2821>
This new filter allows test cases to manipulate what the kernel reports,
e.g. mark connected connectors as disconnected to emulate monitors
connecting and disconnecting.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2821>
As part of https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/525
(introduction of transactional KMS API), the logic determining whether a
GPU can have outputs was changed from whether any connectors existed to
whether any connected connectors existed. That effectively meant that we
wouldn't attempt to start at all if there were no monitors connected
while starting up.
This was unintentional, so lets revert back the expected behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2821>
In order to make things more and more asynchronus and to each time we
paint be an isolated event, that can be potentially be applied
individually or together with other updates, make it so that each time
we draw, we use the transient MetaFrameNative (ClutterFrame) instance to
carry a KMS update for us.
For this to work, we also need to restructure how we apply mode sets.
Previously we'd amend the same KMS update each frame during mode set,
then after the last CRTC was composited, we'd apply the update that
contained updates for all CRTC.
Now each CRTC has its own KMS update, and instead we put them in a per
device table, and whenever we finished painting, we'll merge the new
update into any existing one, and then finally once all CRTCs have been
composited, we'll apply an update that contains all the mode sets for all
relevant CRTCs on a device.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2855>
MetaRendererViewNative is a MetaRendererView which contains logic
specific to views of the native backend. It will be used by following
commits.
In the future, per-view logic from MetaRendererNative can be moved to
MetaRendererViewNative where it makes more sense to have it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2855>
Add a tiny library that sabotages errors in drmMode*() API calls. This
will be used to artificially trigger arbitrary errors, e.g. cause the
next commit to fail with EBUSY.
The three mocked methods are added as they will be used in a future
commit.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2854>
Instead of using the "discarded" page flip callback when the
"discarding" happened during actual immediate processing, communicate
the same via the KMS update feedback.
The "discarded" page flip callback is instead used only for when a
posted page flip is discarded. In the atomic backend, this only happens
on shutdown, while in the simple backend, this also happens when a
asynchronous retry sequence eventually is abandoned.
This allows further improvements making KMS handling fully async.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2854>
At first it was called seal(), but then updates could be amended after
being posted, given a flag. That flag has been removed, so we can go
back to sealing, since it's once again acts more as a seal.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2854>
We test direct client buffer scanout using a TEST_ONLY commit on atomic,
and with various conditions in non-atomic, but if we end up failing to
actually commit despite this, handle the fallout asynchronously. What
this means is that we'll reschedule a new frame immediately.
For this to work, the same scanout buffer needs to be avoided for the
same CRTC. This is done by using the newly added signal on the
CoglScanout object to let the MetaWaylandBuffer object mark the current
buffer as non-working for the onsrceen that it failed on. This allows to
re-try buffers on the same onscreen when new ones are attached.
This queues a full damage, since we consumed the qeued redraw rect. The
redraw rect wasn't lost - it was accumulated to make sure the whole
primary plane was redrawed according to the damage region, whenever we
would end up no longer doing direct scanout, but this accumulation only
works when we're not intentionally stopping to scanout. For now, lets
just damage the whole view, it's just an graceful fallback in response
to an unexpected error anyway.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2854>
If we call schedule(), which will schedule an update some time in the
future, and then schedule_now(), we should reschedule the frame clock to
update immediately, and not some time in the future.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2854>
If we get a "ready" page flip feedback, it means the page flip was
symbolic, i.e. not real, e.g. as a result of an update that didn't
change the state of the primary plane. Warn if there is a "next fb"
meaning we expected to have a new buffer that we flipped to.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2854>
This is intended to be used only for plane assignment, and CRTC like
changes, so that one can e.g. change a cursor plane on a pending update
that changes the primary plane, before it has been committed to KMS.
The kms-updates test overrides the get-state function MetaKmsCrtc. This
is needd to not have the update mechanism not clamp the gamma size to 0,
as vkms reports the gamma length 0. By pretending it's 3, we can test a
simple and small gamma lut is merged correctly when merging updates.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2854>
This looks like a bug: There's no reason why windows which advertise
min-size hints that are exactly the size of the workarea should not be
allowed to maximize, so change the checks here to allow for that.
The commit message of 7f64d6b9 also makes the point that this was not
intended, as it says "larger than".
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2873>
Surfaces belonging to a screen-casted window should always be considered
visible even if they are not visible on any stage view - be it because
they are on a different workspace, minimized or occluded.
Doing this in an optimal fashion is highly complex right now -
interdependent with (and somewhat similar to) ClutterClones. Thus treat
stream-casted surfaces similar to those with clones, with the small
difference that even a fully invisible surface still gets a primary view
- the fastest one. This ensures that clients never refresh too slow for a
screen-cast, at the cost of sometimes refreshing too fast.
The later only happens on certain multi-monitor setups and should thus be
acceptable.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2789>
There is an increasing number of cases where we want the frame callback
logic to run for a stage-view and the complexity needed to avoid these,
combined with the likelyhood of bugs, arguably does not justify the
benefit any more.
Thus unconditionally schedule updates for all stage-views when frame
callbacks are requested.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2789>
Screen-casted windows need to be considered visible in various situations
but existing APIs such as `clutter_actor_is_effectively_on_stage_view()`
don't do so. Add new API that allows checking if a surface belongs to a
screen-casted window for the respective cases.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2789>
The introduction of the META_GRAB_OP_WINDOW_FLAG_UNCONSTRAINED
flag threw off some checks around keyboard-driven resize. This
was partly because there were some == checks that did not account
for that flag maybe being enabled, but also the handling
of META_GRAB_OP_KEYBOARD_RESIZING_UNKNOWN into a definite
resize direction was maybe unsetting that flag. Fix both things
at the same time.
Fixes: 2d8fa26c8e ("core: Pass "frame action" grab operations as an "unconstrained" grab op")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2629
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2871>
From the scale factors available to it, Mutter will now try to select
the scale factor that makes the UI's size as close as possible to the
size it would be, w/o scaling, on a display at 135 PPI (for mobile
displays) or at 110 PPI (for stationary displays)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2653>
After !2489, the active workspace's MRU list is now used to pick
the next focus window instead of the stack order.
This list is currently only updated on focus, which can lead to
surprising behavior when closing a window after activating its
ShellApp in the shell.
That is because raising a window (as part of shell_app_activate())
will only change the stacking order, so when closing the active
app window, the focus will switch to whatever had focus before the
app was activated, not the app's next window.
In order to allow gnome-shell to address this, add a new
raise_and_make_recent() method that also adjust the MRU order.
https://gitlab.gnome.org/GNOME/mutter/-/issues/2540
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2866>
The pointer to the manager, the peer name and the ID are things that are
always metadata related to a session, so make them properties on the
interface instead of duplicating them. The implementations still need to
keep track of them, but their existance is shared.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2713>
This class is intended to be used as a base class for D-bus interface
implementations that deal with "session" objects, i.e. a D-Bus object
representing a certain session of some kind, e.g. a screen cast session.
It handles things such as hooking up to the D-Bus client watcher,
generates IDs, handles shutdown procedures.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2713>
It's currently not set by anything, and will only be used by
non-abstract implementations of a future D-Bus interface session
manager. When interface implementations gets ported to this new type,
their MetaDbusSession implementations will set this vfunc.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2713>
This means the MetaDbusSession interface takes a more active role
instead of being something that more or less sends signals to the
interface implementor. This will allow better control when using
MetaDbusSession to manage these sessions, instead of their non-abstract
variants.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2713>
Allows for creating LUTs at some fixed size which maintains enough
precision for concatenating or otherwise manipulating the LUT without
having to care about the precision of the hardware.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2861>
If the device supports the atomic API the property based API is used to
write gamma updates and the legacy API is used in the non-atomic case.
The current state is read from the legacy API always though which can be
different from the property API. This commit always uses the correct API
to update the state.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2861>
This API will be used by GNOME Shell to handle X11 events
in the relevant places, as a substitute to gdk_window_add_filter().
It is ATM still a bit ironic, since the Mutter X11 event handler
is itself a GdkFilterFunc, but it may move away from that eventually.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2779>
With detach meaning having the onscreen stop listening on configuration
changes on the corresponding backing mode setting objects. We need to do
this as there is a time between rebuilding the views, and that the new
mode sets are called, where the old onscreen is kept alive, but the
stage view is gone. At this point in time, if privacy screen or gamma
configuration changes, e.g. by the night light temperature changing, the
onscreen would attempt to schedule an update on the now gone stage view.
This commit also renames the "keep onscreen alive" to "detached
onscreens" to more clearly communicate that it's detached onscreens from
their corresponding mode setting objects.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2621
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2863>
For the coordinates of pointers or stylii, we translate the ones we store
using the viewport matrix already. For touch events otoh, we store coords
untranslated and translate them later only for event emission.
Let's be consistent here and store the coordinates of touch events
translated, just like we do for pointer events.
This fixes touch window dragging on rotated monitors. MetaWindowDrag calls
clutter_seat_query_state(), which uses those stored coordinates. So in case
of a touch sequence the coords returned by query_state() would be
untranslated.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2859>
In the case where we early-out from meta_window_drag_begin(), the
effective_drag_window might not be set yet. In this case, we might finalize
the object before effective_drag_window is set, leading to a NULL pointer
when accessing window->display in hide_tile_preview().
To avoid that crash, add a check whether the window is set already. If no
window is set, we can just skip hiding the preview anyway.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2858>
This fixes an issue when GLFW tries to change the display resolution
while fullscreen where the application window size doesn't get updated
according to the emulated resolution.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2725>
Streams are generally recoverable by the client and errors may happen
e.g. on negotiation failures. Right now we close the stream and
corresponding session, which is neither necessary nor expected by
clients.
Just disable the stream instead and let clients handle things as they
seem fit. This allows clients to e.g. try several Gstreamer pipelines
with limited caps on a single stream.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2850>
Doing it in dispose means the backend is actively tearing down itself,
meaning various components might or might not be there, depending on how
the tearing down is implemented. Make things a bit more robust by doing
any work that might rely on the backend being there before shutdown is
done in response to the 'prepare-shutdown' signal being emitted by the
backend.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2853>
Reading upon the history of this code branch (commits 6891ce95dc
and 7a4c808e43 are most relevant), it seems this code is meant to
synchronize Mutter focus state taking the Xserver state as true.
That is, if Mutter tried to change the focus but something truncated
that action, Mutter focus will be changed to be in sync with the
Xserver again.
This sounds backwards in a Wayland session. Mutter focus should be
the canonical source, and not second-guessed from the current Xserver
focus window. These race conditions might still apply between X11
clients, so make these paths only apply in that case.
An example of this breaking can be reproduced with a Spotify and
Firefox window, moving the focus from the first to the second by
going to the GNOME Shell overview in between, and clicking the
Firefox window from there. The Firefox window will be raised, but
refuse to take focus.
It's unclear what made this an issue recently, perhaps commit
0e6395d932 since the now possibly ignored XI_FocusIn/Out events
affect this accounting of the Xserver focused window. Anyhow it
sounds better to ignore these paths for Wayland/native altogether.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2841>
The intention when the offset request was added to protocol was
that the attach request in a new enough protocol version should
require dx/dy to be zero, but ignore them otherwise.
The current code checks for 0, but then overwrites the existing
dx/dy with it, which renders an earlier wl_surface_offset() call
ineffective.
Fixes: #2622
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2843>
This protocol is intended to let special clients create transient-for
relationships between X11 and Wayland windows. The client that needs
this is xdg-desktop-portal-gnome, which will create e.g. file chooser
Wayland dialogs that should be mapped on top of X11 windows.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
When modal dialogs are attached, and we set the parent/transient-for
after setting the modal type, the attachedness isn't updated. This is
(apparently) not the case for X11 windows, as they go through a
unmanage/manage dance avoiding the issue.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
The script is a list of newline separated command lines that are sent to
the client one by one as if one would have used e.g.
meta_test_client_do().
It doesn't have error handling as it's expected to be used from tests,
and handling errors in tests that never expects to handle errors is
cumbersome.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
The service channel D-Bus interface aims to be a "back door" for
services that needs special casing in Mutter, e.g. have custom private
protocols only meant to be used by that particular service.
There are currently no special casing implemented; only the basic
service channel infrastructure is added. There is a single method on the
interface, that is meant to eventually be used by
xdg-desktop-portal-gnome to open a Wayland connection with a private
protocol needed for the portal backend's rather special window
management needs.
The service channel Wayland client works by allowing one instance of
each "type", where each time needs to be defined to work in parallel. If
a new service client connects, the old one will be disconnected.
MetaWaylandClient's are used to manage the service clients, and are
assigned the service client type.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
One can add a wl_global filter to a wl_display instance, which can be
used to decide what clients should see what globals. This has so far
been used to limit a Xwayland specific protocol extension to only
Xwayland. In order to expand the logic about what globals are filtered
to what clients, introduce a filter manager and port the Xwayland
specific protocol filter to this new manager.
Tests are added, using a new dummy protocol, to ensure that filtering is
working as expected.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
It only tests indirect clients, i.e. not the subprocess part, so far,
but tests explicitly terminating by destroying the MetaWaylandClient
object, as well as the client self terminating and the signal being
emitted.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
This API creates a "client" then later sets up a wl_client and returns a
file descriptor some Wayland client can connect to. It's meant to be
used as a method other than WAYLAND_SOCKET and process launching, e.g.
passing a file descriptor via a D-Bus API.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
There will be two kind of client instances, lets move fields that are
only relevant to the current way of operation in an anonymous struct to
keep things a bit separate.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2810>
On X11, the stage itself is backed by an XWindow, and moving the
input focus elsewhere will bypass any Clutter-level grabs.
This effectively allows newly opened windows to steal the focus
from gnome-shell itself, which is clearly undesirable. To prevent
that, only allow moving the X11 focus to a Window when no grab is
in place, just like commit 50e89e376 did for the stage focus.
But particularly the updating of x11_display->focus_xwindow is not
prevented. Since it's more consistent to the MetaDisplay/MetaX11Display
dual focus tracking and across Wayland/X11 backends, ensure the X11
input focus is actually set on the last focus Window after the
grabs are gone and windows became interactable again.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2832>
This patch unfortunately results in situations where it is intended
that the focus change happens while a grab is present (e.g. Alt+tab
popup), resulting in confused focus state.
This commit is reverted in order to try a similar approach at a
different level.
This reverts commit 7531669b4f.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2832>
We used it to retrieve a Display, and convert between Atoms and
strings. We can just use the MetaX11Display's Display (It's the
same than GDK's anyways) and use XInternAtom/XGetAtomName for
these conversions.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2836>
We didn't always set an implementation, when the foreign toplevel wasn't
found, and when the importer tried to set the parent-child relationship,
the implementation was missing and we'd crash in wl_closure_invoke() in
libwayland-server.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2834>
Windows that are decorated may get configure requests before
the frames client created a corresponding frame window and Mutter
reparented the window.
Since the configure request results in the buffer size being
used to update the window size and the window does not have a
buffer yet, these requests could mistakenly result in the client
window being given a minimal size.
In these situations, do not use the buffer size but the given
size. The window still has to undergo frame creation and
reparenting before being shown for the first time.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2588
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2605
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2808>
This used to be implicitly done by popups using a META_GRAB_OP_WAYLAND_POPUP
MetaDisplay grab. Since commit a8cd488c6f Wayland popups no longer do that,
so the keyboard focus was simply unset if a popup was destroyed while having
the keyboard focus.
Trigger a full input focus sync, so the correct MetaWaylandKeyboard focus
surface is looked up from the focused MetaWindow.
Fixes: a8cd488c6f - wayland: Drop redundant MetaDisplay grab op
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2833>
On one hand, this used to be handled generically in all the paths that
changed the MetaWaylandPointer focus surface, induced by user interaction
or not.
On the other hand, just listening for crossing events is not sufficient
since those also do happen programmatically. We must only listen to
crossing events that have a physical source device, meaning this was
created through user interaction.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/888
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2828>
On Wayland sessions, this handling is unnecessary and even prone
to confusion (e.g. crossing serials are only ignored in X11-exclusive
paths, so this handling competes directly with that in MetaWaylandPointer).
Avoid it entirely there, so MetaWaylandPointer can figure out
sloppy/mouse mode focus for all Wayland/Xwayland surfaces.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2828>
In GTK this is only used for GTK clipboard/DnD selections, and
finding out whether there is a compositing manager in charge.
In Mutter, we manage our own clipboard/DnD selections, and don't
perform any rendering through GTK in the Mutter process.
So there's no special reason to let these events go through GTK,
and (related to xwayland-on-demand?) there may be race conditions
in the handling of the second feature.
There's a chance this race condition may be in Mutter, but it
does not sound worth to chase this race condition when we can
let GTK ignore these events. And it does not make sense to "fix"
gtk3 for this Mutter-only condition, when we intend to eventually
avoid it.
So, take the easy path and ignore these events.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2617
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2831>
The first monitor in stacking tests is the primary monitor but that
doesn't have to stay this way forever. Instead of special casing the
name "primary" to refer to whatever monitor happens to be the primary
monitor, we add an `assert_primary_monitor` command to verify that the
monitor that should be the primary monitor actually is.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2748>
New add_monitor command for adding secondary monitors. Support setting
the workspaces-only-on-primary preference.
The stacking test tests the focus and stacking for multiple monitors
with workspaces-only-on-primary=true. The default_focus changes
previously broke this.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2748>
bind_output() creates output interface resource, but does not
set implementation for it when wayland_output->monitor is NULL.
However, when the wayland library is running wl_closure_invoke(),
it expects the implementation to be non-NULL, and if not, it just
segfaults mutter by NULL pointer dereference.
This commit tries to address this issue by setting an implementation
when wayland_output->monitor is NULL. This could help prevent crash
when resuming from suspend or hotplugging displays.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2570
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2827>
The order of dependencies influences the order of -L arguments to gcc/ld,
we should put our private library first, so that introspection prefers
looking up libraries in private paths than public ones.
This could bring problems in API updates of the libmutter-test library,
since introspection would still prefer the old installed one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2826>
ClutterActions now no longer receive their events via
clutter_actor_event(), instead they get special treatment by the stage
now. Make the MetaGestureTracker work with this and stop emitting events
directly to Clutter via clutter_actor_event(), but instead let them get
through to Clutter (but still not to Wayland).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2342>
The previous logic tried to keep the position of the top left corner of
the window relative to the top left corner of the monitor. This allowed
the window to move out of the target monitor. This change keeps the
proportions of the distance between the window and the monitor borders
instead if possible. Otherwise it keeps the relative position of the
center of the window clamped to [0,1] to make sure the window lands on
the right output.
This also slightly changes what monitor is considered to be on: the
monitor which contains the center of the window and, if the center is on
no monitor, the monitor wich overlaps the most with the window.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2591>
This partly reverts f9857cb8 but leaves an exception for cursor
surfaces in place, as some apps/toolkits will likely not get updated
anytime soon to ensure cursor themes comply with the Wayland spec.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2815>
So we can remove the additional `next_fb` and `current_fb` pointers from
`MetaOnscreenNativeSecondaryGpuState`.
Some non-scanout buffers also need to be held in the case of GL blitting
which completes in the background. Those are referenced from the scanout
buffers themselves to ensure the source buffers live just as long.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2087>
As with GAMMA_LUT, track whether privacy screen state has been pushed to
KMS in the onscreen. This leaves MetaOutput and MetaCrtc to be about
configuration, and not application.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2814>
As with CRTC GAMMA_LUT, we're moving towards making the entity managing
KMS updates aware if there are any changes to be made, and whether KMS
updates are actually needed or not, and for privacy screen changes, this
means we need to communicate whether the privacy screen state is valid
or not. This allows the caller to create any needed MetaKmsUpdate.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2814>
We're moving towards making the entity managing KMS updates aware if
there are any changes to be made, and whether KMS updates are actually
needed or not, and for GAMMA_LUT changes, this means we need to
communicate whether the GAMMA_LUT state is valid or not. This allows the
caller to create any needed MetaKmsUpdate.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2814>
We may fall through these paths on --nested too, resulting in us poking the
wrong internals from the wrong MetaRenderer subclass. Fixes launching of
clients using wl_drm in --nested.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2818>
Running each stacking test as a separate installed-test is analogous to
what was done for build-time tests in c6d1cf4a (!442) and should make it
easier to track regressions, by being able to see whether a regression
is specific to one .metatest script or applies to more than one.
Signed-off-by: Simon McVittie <smcv@debian.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2773>
While completely untested, at least this makes it work "in theory"
again. Before it'd listen to signals on the stage, but have an incorrect
type signature to handle the test paint procedures, meaning it'd
probably crash or cause memory corruptions.
What was needed was a signal which in the callback the test could call
some cogl functions to paint on the framebuffer. While there is no such
signal on the stage, and the ClutterActor::paint signal (which they
probably used in the past) is long gone, lets add a "test actor" that is
just a wrapper that adds that paint signal with a paint context.
The tests that need it are changed to add this actor to the stage, and
to listen to the paint signal on the actor instead of incorrectly
listening on stage signals.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2807>
At least indirectly, this is set as object qdata while the
window drag is ongoing, and reset/reconstructed if needed.
Consequently, this edge data does not need to be stored in
the MetaDisplay struct anymore.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
Even though the data is still stored in the display, add a "high
level" meta_window_drag_update_edges() call, so that the cached
edges may be updated while a window drag operation is ongoing.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
This is a public API change. Add device/sequence parameters to this
operation, so that window dragging and resizing can stick to one
set of pointing events of them all.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
Since MetaWindowDrag took a lot of this code to handle window drags
internally with less interactions with the rest of the stack, this
code in display/window/keybindings is unused.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
Flip the switch in using MetaWindowDrag, leaving display grab
ops and a bunch other code unused. Some places checked the grab op
and/or window in complex ways, others just checked for grab existence
and should now look for clutter ones, and others already were already
doing this in addition.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
This helper object (and the whole window drag operation) will be
requested to the compositor instead of created directly, and only
one of those can exist at a time, so the compositor will also
safeguard that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
Since SSD X11 windows require synchronization between frame and client
windows on resizes, updates do not always happen immediately but in
control of external factors (i.e. when both windows become to have
a coherent size).
This method will be used to update the window position between
resize/sync operations.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
This compositor-side object will single-handedly drive a window
drag operation. Currently, this largely copies meta_display_begin_grab_op
and meta_display_end_grab_op, except grabbing is done through a
ClutterGrab instead of direct meta_backend_grab_device() calls. This
also means that the switch from passive to active keyboard grabs is
handled differently.
Currently, this object is dormant. It requires moving more code from
other places to become a fully functional replacement.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
We only allow partial grabs in the case of a keyboard-type MetaGrabOp
happening while the pointer cannot be grabbed. In that case, it's not
a big stretch to unconditionally ungrab the pointer device at the time
of undoing the grab, as it will be always ineffective (not even implicit
grabs on frame windows can happen now, inside Mutter).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
This is no longer necessary, since the SSD frames are no longer
part of Mutter process, so it is not the MetaX11Display connection
which holds the implicit grab when a mouse button is pressed over
a window frame (say, to start a drag).
As the SSD frames client communicates the same way than CSD windows
for window operations, it is also expected to undo its implicit
grab before requesting a window move/resize operation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
The final effect of this boolean can now be expressed through the
META_GRAB_OP_WINDOW_FLAG_UNCONSTRAINED flag to MetaGrabOp. Use that
in the relevant places, and drop the argument.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
Now that it is called from a single place, there's a few arguments
that are unnecessary:
- button and modifiers are unused
- already_grabbed was originally added to handle grab transitions between
window menus (GtkMenus, back in the day) with display grabs. It's no
longer necessary now
- frame_action can be passed through the META_GRAB_OP_WINDOW_FLAG UNCONSTRAINED
flag
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
Leave meta_window_begin_grab_op() as the only public API to initiate
a display grab. There's no longer grab operations that don't attain
windows, and ending these grabs usually happen through user interaction
when the right circumstances happen.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
There is no longer reason to call meta_display_begin_grab_op() except
for window grab operations, and meta_window_begin_grab_op() is a
perfectly fine entry point for all window grab operations.
Move away from meta_display_begin_grab_op().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
Currently, it is thought out to be called with META_GRAB_OP_KEYBOARD*
grab op parameters. Make it more generic so it can also be called for
pointer operations (avoiding pointer warping in that situation).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
Unlike the comment suggests, this piece of event handling manages
the ungrabbing of a window on button press in the following 2
conditions:
- If a keyboard grab operation was triggered, the window does
additionally follow the pointer, and first button press ends
the grab.
- If a button-press grab is ongoing on the window, but more buttons
are pressed.
We can simplify this to just happen every time a button press event
is received while a window grab op is ongoing. The only case where
this might diverge a bit is same button presses from different
pointer devices, and it's not a big stretch to also undo the grab
in that situation.
This also happens to make the "button" argument in
meta_display_begin_grab_op() completely unused.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
The frame_action boolean is only used by constraints.c code, in order to
determine whether a moving window should be able to move past the top
bar or not.
We can avoid the special casing by passing this information as a
META_GRAB_OP_WINDOW_FLAG_UNCONSTRAINED flag passed with the grab op.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
This is no longer necessary to prevent the bits we wanted to be
prevented by the presence of this grab. We can drop this, and
let it work through the MetaWaylandPointerGrab interface.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
The whole reason for META_GRAB_OP_WAYLAND_POPUP to exist is to
avoid windows from being activatable/movable/resizable when a
grabbing xdg_popup is active.
Use the meta_display_is_grabbed() method which can tell this
from existing MetaWaylandCompositor grabs, so that this remains
true after dropping META_GRAB_OP_WAYLAND_POPUP.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
Make this public API check just return a boolean about whether
there is an existing grab, instead of exposing MetaGrabOp.
It is desirable to avoid exposing details like
META_GRAB_OP_WAYLAND_POPUP, so that MetaDisplay and wayland
grabs can port to ClutterGrab at their own pace, but also
this further information is unused.
This is likely to be temporary API anyways, after both
MetaDisplay and wayland grabs port to Clutter, it will be
possible to check the ClutterStage for all of them.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
Rewrite this codepath so it handles the grab ops that it cares
about, and ignores the rest. This way the code works despite
possible future modifications to MetaGrabOp (e.g.
META_GRAB_OP_WAYLAND_POPUP removal).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
This piece of event handling only applies on windows receiving events while
the display is ungrabbed (i.e. for raising it, or beginning a move/resize
operation).
Move the checks on the current grab operation outside of window.c and into
events.c, so all checks about the current grab operation move closer to the
main event handler.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2683>
When sysprof-4 and libsysprof-capture-4 are installed into different
prefixes, such as with Nix package manager, the D-Bus interfaces
are likely not discoverable from the latter package.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2572>
The GQueue node for transactions are inlined in the transaction struct,
meaning we should never let the GQueue API free the node itself, as that
actuall frees the transaction itself.
We did this during tear down if there were left-over transactions,
meaning we ended up with use-after-free issues after having popped
transactions from the queue.
Fix this by just popping the link itself, which won't attempt to free
it. It is effectively freed when freeing the transaction itself so we
won't leak any memory.
Fixes: 56260e3e07
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2805>
During grabs, it is expected that the X11 focus does not correspond
to the display's focus window, as focus should be on the stage's
XWindow instead.
This still messes up the keyboard focus even after we stopped moving
the X11 focus, because we end up with a presumed X11 focus window
of None, and as a result the stage is considered unfocused.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5932
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2776>
When the pointer crosses monitors, we account for a single motion event
resulting in the pointer moving across more than 2 monitors, in order
to correctly account each monitor scale and the distance traversed
across each monitor in the resulting relative motion vector.
However, memory on the direction is kept short, each iteration to
find the target view just remembers the direction it came from. This
brings a pathological case with 4 monitors with the same resolution
in a 2x2 grid, and a motion vector that crosses monitors at the
intersection of all 4 in a perfect diagonal. (Say, monitors are
all 1920x1080 and pointer moves from 1920,1080 to 1919,1079).
In that case, the intersection point at the crossing between 4
monitors (say, 1920,1080) will be considered to intersect with 2
edges of each view. Since there is always at least 2 directions to
try, the loop will always find the direction other than the one
it came from, and as a result endlessly jump across all 4 possible
choices.
In order to fix this, consider only the global v/h directions,
we already know if the pointer moves left/right or up/down, so
only consider those directions to jump across monitors.
For the case at hand, this will result in three monitors visited,
(either bottomright/bottomleft/topleft, or bottomright/topright/topleft)
with a total distance of 0,0 in the middle one, effectively
resulting in a correct diagonal motion.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2598
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2803>
Refactor code so that variables don't depend the on motion line
content, but the other way around. This makes it clearer what each
vector means.
This has no functional changes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2803>
Some tests expect warnings to be logged, and handle that using
g_test_expect_message(). However, if debug topics are enabled, this
causes g_logv() to expect expected messages to also contain entries with
the debug level 'message' or higher to be listed in the expected message
list. Since meta_topic() always logged using g_message(), enabling debug
topics caused any test that used g_test_expect_message() and had debug
logging somewhere along the code path to fail.
Fix this by changing the log level of meta_topic() to 'debug' if we're
in a test. This doesn't mean they won't be visible, they still will
since debug log entries are printed by default during testing.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2800>
That means before-update, prepare-paint, before-paint, paint-view, after-paint,
after-update. While yet to be used, it will be used as a transient frame
book keeping object, to maintain object and state that is only valid
during a frame dispatch.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2795>
It was missing a cairo_region_t. This also needs adapting the test case,
since prior to this, we didn't actually bump the paint counter when
painting.
When a scanout test isn't waiting to go from compositing to scanout, but
from scanout to compositing, we should not early out when we actually
composited, since that's what we're expecting to see.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2795>
We might end up with a NULL opaque_region here in some circumstances
(client deleted _NET_WM_OPAQUE_REGION, or passed invalid data or a
region with 0 rectangles), account for that when freeing the variable.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2758>
These frames client will use a visual with alpha information, and
report the opaque frame shapes through the _NET_WM_OPAQUE_REGION
window property. We can use this information in the Mutter side
for accurate opaque shapes, despite X11 windows with frames now
being seen as possibly transparent.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2758>
Since the windows created by the frames client will have a RGBA visual, we
no longer can perform simple tests about whether the window is opaque. For
that, we will need to additionally know whether the client-side window has
a visual with an alpha channel.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2758>
This does nothing wrt making race conditions shorter in the
X11 window manager switch case, but is a nice to have in order
to ensure an orderly shutdown of X11 stuff.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2796>
Restarting a X11 window manager is a busy process, trying to leniently
quit the main loop may result in old and new instances each having a
frames client up and running, and the window handover to be less clean
than it should due to the frames client that is about to exit still
being able to react to the batch of events resulting from the window
manager switch that is already undergoing.
In order to avoid extending this transition period any long, make
the frames client exit() the process immediately when SIGTERM is
gotten from the parent process.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2796>
Writing to fields (in this case the MetaColorDevice::pending_state) in
response to an asynchronous operation that was cancelled means we'll
write to an arbitrary memory location, potentially causing segmentation
faults or memory corruption.
Avoid these segfaults or memory corruption by only updating state if we
weren't cancelled. Also avoid trying to dereference the device pointer
if we're cancelled.
The memory corruption due to this has been causing test flakyness in the
monitor unit tests due, which should now hopefully be fixed.
Fixes: 19837796fe
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2794>
I hit this rare error running the "x11" test from the suite locally:
(mutter:194027): Gdk-ERROR **: 18:21:52.525: The program 'mutter' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadDrawable (invalid Pixmap or Window parameter)'.
(Details: serial 663 error_code 9 request_code 143 (DAMAGE) minor_code 1)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the GDK_SYNCHRONIZE environment
variable to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
The only call from the Damage extension in use by Mutter that could
return BadDrawable is XDamageCreate(), and it's likely to be this
call. Wrap this X11 in an error trap, in order to catch possible
failures.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2793>
Flushing the input thread might implicitly iterate the mainloop, and thus
update the stage while still inside the clutter_test_flush_input() call.
This means the stage update has already happened when we call
wait_stage_updated(), and that's why we call clutter_stage_schedule_update()
there currently.
This clutter_stage_schedule_update() call is not necessary though, instead
we can flush the input thread from inside wait_stage_updated() after
setting was_updated to FALSE.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2792>
If the window is unmapped or otherwise unmanaged while still existing,
we would fail to let the frames client follow up in destroying the
frame for the window.
Delete the _MUTTER_NEEDS_FRAME property, so that the frames client
can react to meta_window_destroy_frame(), this avoids stale invisible
frame windows for clients that simply unmap windows to reuse them
later.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2791>
Recent versions of Xwayland can allow or disallow X11 clients from
different endianess to connect.
Add a setting to configure this feature from mutter, who spawns
Xwayland.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2785>
This define was dropped by commit 0e8aaebc00 (xwayland: Make
XSetIOErrorExitHandler() mandatory), but some #ifdef checks were
brought back by commit 36f30341ac (wayland: Add a prepare-shutdown
signal).
Since there's no define anymore in config.h, these pieces of code
were unintentionally disabled, and a meta_get_display() call be
also left over. Remove the ifdefs and update the code to build
again.
Fixes: 36f30341ac - wayland: Add a prepare-shutdown signal
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2786>
This XChangeWindowAttributes call was never surrounded by an error trap
and was not really expected to fail with BadWindow since the frame window
would be owned by Mutter itself.
This however is no longer true, and we might be getting a BadWindow from
the frame window given the right timing.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2745>
