Since we are trying to eliminate the ClutterGeometry type, we should
replace the only entry point still using it: the ::cursor-event signal
of ClutterText.
Instead of passing the cursor geometry, we should add an accessor
function.
The combination of signal and getter for the cursor geometry means that
we can deprecate ClutterText::cursor-event, and mark it for removal in
Clutter 2.0.
https://bugzilla.gnome.org/show_bug.cgi?id=682789
On the other backends we will get some sort of expose event after
showing the stage's window which will queue a redraw. These expose
events don't exist on Wayland so nothing will cause Clutter to queue a
redraw. Weston doesn't bother displaying anything for the stage's
surface until the first buffer is sent, which of course it will never
receive if Clutter doesn't paint anything. This patch just makes it
explicitly queue a redraw after the stage is shown so that we will
always pass at least one frame to the compositor.
The bug can be seen by running test-stage-sizing. That example doesn't
have any animations so it won't try to queue any redraws until
something interacts with it. On the other hand something like
test-actors works fine without the patch because it constantly queues
redraws anyway in order to display the animation.
https://bugzilla.gnome.org/show_bug.cgi?id=696791
If clutter is built with both X11 and Wayland support, prefer the
(more complete for now) X11 backend. This matches GTK+'s current
ordering.
This allows distributions to ship a clutter version with both backends
built, and using an envvar to switch to the wayland backend and test
applications.
In the future, applications would be able to choose which backend
they prefer and in which order.
https://bugzilla.gnome.org/show_bug.cgi?id=695838
If an actor has not been painted yet, or it's not going to be painted,
we can ignore transitions queued on it.
By ignoring transitions on actors that have not been painted yet, we can
avoid doing work during the set up phase of the scene graph, as well as
avoiding actors "flying in" from nowhere.
Obviously, we have to take into account potential clones, so we need to
check that the actor is not part of a cloned branch of the scene graph,
as well as checking if the actor has mapped clones.
If an actor is unmapped then it won't be painted, so we can safely
short-circuit out of _clutter_actor_queue_redraw_full() if the mapped
flag is not set.
We need, on the other hand, make an exception for Clones, otherwise
they won't receive notification that the source actor has changed
and they won't be painted.
This allows us to ignore redraws queued on children of invisible
parents, and avoid traversing the scene graph.
Instead of using signal notifications, we should be able to keep track
of the clones of an actor from within ClutterActor itself, using private
API. There's no point in pretending that people can actually create a
Clone class out of tree, given the amount of invariants we have to punch
through in order to implement a proper replicator node of the scene
graph, so we can just skip the signal emissions and just do the right
thing at the right time.
More comments are warranted: these functions are pretty much full of
potential side effects, and I'd really like to avoid keeping everything
in my head forever.
Along with the comments and the type casting reduction, I sneaked in a
one line change that is clearly correct after reading the flow of the
whole thing: we queue only a relayout after three potential redraws have
been queued. If we manage to miss a redraw and yet still get a relayout
then it means that most of our assumptions are fundamentally wrong, and
that we ought to dump this whole business of computer programming, and
just go back to being a hunter-gatherer species.
Since XIQueryVersion, the bad API that it is, chooses the first client
version that it gets, we need to ensure that we pass XIQueryVersion the
new XI2.3 version, knowing fully well that Clutter won't be confused
by the new features.
https://bugzilla.gnome.org/show_bug.cgi?id=692466
The X server should fill in the minor version that it supports in the
case where it only supports the older version. We should not get a
BadRequest or fail the version check if we pass something higher.
https://bugzilla.gnome.org/show_bug.cgi?id=692466
Text exposed by the AtkText methods should be the text
displayed to the user (like the internal method
clutter_text_get_display_text). So it should use the password-char
if it is being used.
This is also a security concern.
The original code inside ClutterActor that dealt with Transitions
stopping was written for the ::completed signal, thus the code was
correctly handling the lifetime of the instances; when we moved to the
::stopped signal, we assumed that it worked in the same way - with less
conditions to be checked, obviously, but fundamentally similar to the
::completed signal. Sadly, I screwed up the signal definition, and the
signal ended up calling our handlers, but not the default one that did
the cleanup and released references on the Animatable instance.
After fixing the Timeline::stopped signal, we can go back to the
previous code.
Thanks to Craig Hughes for the help in tracking down this mess.
https://bugzilla.gnome.org/show_bug.cgi?id=695158
A copy and paste thinko: the ::stopped signal is using the
ClutterTimelineClass.completed slot instead of the .stopped one,
thus preventing sub-classes of ClutterTimeline from overriding the
signal's default closure.
When stopping the transition we need to release the reference we
maintain while removing the Transition from the hash table inside an
actor. If we fail to do so, the Transition is never released, which
means we leak the Animatable instance we tied to it.
https://bugzilla.gnome.org/show_bug.cgi?id=695158
The ClutterOffscreenEffect.get_target_size() method has been deprecated,
and replaced by the get_target_rect() one. We can easily switch to the
latter, and avoid the deprecation warning.
https://bugzilla.gnome.org/show_bug.cgi?id=670004
The target size is not always enough, there are cases where the offset
used to paint the target must also be available for developers
implementing an OffscreenEffect.
The get_target_rect() method returns the rectangle used to paint the
target, with the offsets in the ClutterRect:origin and the texture size
in the ClutterRect:size fields, respectively.
The get_target_size() method should be deprecated, given that its
replacement is generally more useful.
https://bugzilla.gnome.org/show_bug.cgi?id=670004
If we pass TRUE for x_align and FALSE for y_align, the full available
width should be passed to clutter_get_preferred_height, and the same
should be true in the other dimension.
https://bugzilla.gnome.org/show_bug.cgi?id=694237
Instead of directly accessing the instance fields. This removes a
compiler warning after the constification of g_get_prgname(), and it
seems to me to be generally more correct.
Instead of using a custom apply_transform(), paint(), and pick()
implementations, we can simply apply a transformation to the children of
a ScrollActor.
https://bugzilla.gnome.org/show_bug.cgi?id=686225
As wayland-client.h and wayland-server.h can't be included together,
split the Wayland backend file into clutter-backend-wayland.h, which
only defines the types, and clutter-backend-wayland-priv.h, which
actually uses the Wayland client types.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
https://bugzilla.gnome.org/show_bug.cgi?id=692851
The definition of wl_display differs between Wayland clients and
servers, and it's unsafe to include both wayland-client.h and
wayland-server.h at the same time. Fudge around this by making the
compositor public API use void * rather than struct wl_display *.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
https://bugzilla.gnome.org/show_bug.cgi?id=692851
This function is deprecated and has been replaced by set_display() on
the renderer. This is done in the get_renderer() vfunc of both the x11
and gdk backends already.
Actually cogl_xlib_set_diplay() is now a no-op and can be safely removed.
https://bugzilla.gnome.org/show_bug.cgi?id=687652
Being able to set a marker at a normalized point on a timeline, instead
of using a specific time, is a nice fit with the current Timeline class
API.
https://bugzilla.gnome.org/show_bug.cgi?id=694319
If anything in the system changes the config for fontconfig then an
XSetting will be set to record the last timestamp of the config file.
This is presumably so that applications can be notified that it has
changed and can reload the configuration. However once this setting is
set it will remain set for the lifetime of the X server. This causes
Clutter to handle the setting during the initialisation of the
backend. Previously this would cause problems because Clutter would
end up creating the default PangoFontMap before the backend has
created the CoglContext. The PangoFontMap would in turn cause the
default CoglContext to be created. Clutter will then later create its
own CoglContext which means there will be two and the first one will
be leaked. Cogl currently can't really cope with multiple contexts
being created so it falls apart.
This patch fixes it to skip reloading the config for fontconfig if
there isn't a default font map yet. The config will presumably
naturally be read with the latest values when it is finally created
anyway so it doesn't need to be read immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=693696
